Related
I recently recieved my One V and finally decided on rooting/installing a custom rom. I came from an Optimus V and had no problems installing a custom rom in that.
However it seems that no matter what kernel/rom I use they eventually lock up within the first 5 minutes of booting and restart. I've tried practically everything and can't get them to work. I wanted to ideally run the CDMA Pacman Rom w/ the Supersick kernel. Any help would be greatly appreciated so I have can have this working before work tomorrow.
Did you do a full wipe ???
ryansinibaldi said:
I recently recieved my One V and finally decided on rooting/installing a custom rom. I came from an Optimus V and had no problems installing a custom rom in that.
However it seems that no matter what kernel/rom I use they eventually lock up within the first 5 minutes of booting and restart. I've tried practically everything and can't get them to work. I wanted to ideally run the CDMA Pacman Rom w/ the Supersick kernel. Any help would be greatly appreciated so I have can have this working before work tomorrow.
Click to expand...
Click to collapse
"It ain't workin" isn't enough information for anyone to troubleshoot from.
Be more specific on what you did, which instructions you followed, what ROM and what kernel, what sort of computer you're running, where you're downloading from, and the steps you are taking. If none of the ROMs are working, the problem is probably not the ROM, if you know what I mean...
donhashem.dh said:
Did you do a full wipe ???
Click to expand...
Click to collapse
Full wipe as in? (sorry, still a bit new). I did do a factory reset in CWM before installing whichever ROM I was trying at the time. I wiped all caches too.
slack04 said:
"It ain't workin" isn't enough information for anyone to troubleshoot from.
Be more specific on what you did, which instructions you followed, what ROM and what kernel, what sort of computer you're running, where you're downloading from, and the steps you are taking. If none of the ROMs are working, the problem is probably not the ROM, if you know what I mean...
Click to expand...
Click to collapse
I used the HTC One V AIO Toolkit to unlock the bootloader, get root, install CWM 6.0, create a backup and then install a kernel (I used the Super Sick JB one). From there I used CWM to gain access to my SD card and transferred over the CDMA Pacman ROM (after wiping everything clean) and then installed the ROM. It booted up successfully however as stated in a minute or so it would freeze up and restart itself. Even if I don't do anything after a reboot it'll still reboot itself anyways.
I did a bit of research and I'm thinking it could be due to the OTA Radio update from 2-3 weeks ago? I'm at my bootloader now and it says I have radio version 1.00.00.0928.
Any further help to resolve this issue would be greatly appreciated. It's worth noting that I've tried many different Kernels (repeating all the steps above with full wipes every time) and different ROMs that were supported by the kernels. I've even tried to restore my phone back to stock and it just starts skipping at the VM Boot screen.
Oh, and I'm running Windows 7.
You mean the Rom booted normally right ?? If yes then the problem is with the Rom
donhashem.dh said:
You mean the Rom booted normally right ?? If yes then the problem is with the Rom
Click to expand...
Click to collapse
Pardon my ignorance but that just doesn't make sense. I've tried several different ROMs with the correct kernel's (Pacman, CM9/10, AOKP JB) and it's all the same scenario. They all boot (or occasionally don't boot and restart themselves at the boot animation) and then reboot themselves once they're pass the lock screen.
Like I said even currently if I restore my stock rom file it just loops at the VM Boot animation (which doesn't play fluidly).
Figured out the issue . It was radio version 1.00.00.0928 messing up my kernel.
Hey all -
I have a T-Mobile Galaxy SIII with TWRP, AOKP JB Milestone 5 and GooManager. I got a pop-up for AOKP JB Milestone 6 this morning, so I downloaded it and added that file, Lean Kernel 2.9 and gapps (latest that could be downloaded) to the flash list. I set my Dalvik cache to clear before flashing anything, then rebooted the phone to flash everything. Immediately after the flash, the phone seemed to reboot, but with a blank screen. After a while, the capacitive buttons on the front started working and when I plugged the phone into my computer the file transfer program popped up.
However ... at no point can I ever get anything to display on the screen. I've tried rebooting into recovery (volume up, home button, power button) and nothing. I don't really care about the data on my phone, I have proper backups of everything. But what I can't seem to do is get it to a point where I can recover it. What are my options here if rebooting into recovery doesn't work?
Thanks!
As an addendum, the phone is clearly booted into the OS. I have a blinking notification LED that indicates a new e-mail, and calls placed to the phone cause it to ring. I just can't see .... anything on it.
I was able to get into TWRP, somehow. I took out my T-Mobile SIM card and had it plugged into USB. I held down the recovery combo and then it booted up into recovery. It also displayed the Galaxy SIII white splash screen for the first time since the bad flash. What the hell.
chuffykow said:
I was able to get into TWRP, somehow. I took out my T-Mobile SIM card and had it plugged into USB. I held down the recovery combo and then it booted up into recovery. It also displayed the Galaxy SIII white splash screen for the first time since the bad flash. What the hell.
Click to expand...
Click to collapse
so was you able to use your phone again i say go back to a nandroid you have or flash a rom that you know works good on your phone without that white screen and trouble shoot from there that it very strange indeed if you get success with the other just try posting in the ROM thread that you flashed you could possibly get more help where it happened :good:
I went back to AOKP Milestone 5 after doing a full wipe. I saw a number of graphics changes in the Milestone 6 code review, so it's possible that had something to do with it. In any case, I'm no longer panicing
Does mr6 use the 3.4 kernel? If yes, then you were using the wrong version of leankernel.
Ya its all kernel related and user error.
Aerowinder said:
Does mr6 use the 3.4 kernel? If yes, then you were using the wrong version of leankernel.
Click to expand...
Click to collapse
mt3g said:
Ya its all kernel related and user error.
Click to expand...
Click to collapse
I assumed it was user error. I just wanted to lay out the steps I took, so I could get some help on a recovery path. I thought that a JB based ROM would work with any kernel that supports JB. Looks like I was wrong.
chuffykow said:
I assumed it was user error. I just wanted to lay out the steps I took, so I could get some help on a recovery path. I thought that a JB based ROM would work with any kernel that supports JB. Looks like I was wrong.
Click to expand...
Click to collapse
Nope, JB can be AOSP, TouchWiz, 4.1, 4.2, 4.2.2, 3.0 kernel, 3.4 kernel. Just need to read and make sure you know what you're doing before just doing it. That's why I frown at people being lazy (not just you) and not reading the forums and such, and just using apps to update and flash.
mt3g said:
Nope, JB can be AOSP, TouchWiz, 4.1, 4.2, 4.2.2, 3.0 kernel, 3.4 kernel. Just need to read and make sure you know what you're doing before just doing it. That's why I frown at people being lazy (not just you) and not reading the forums and such, and just using apps to update and flash.
Click to expand...
Click to collapse
Thank's for the condescension, I appreciate being called lazy. I might not have an encyclopedic knowledge of Everything Android, but between the knowledge I do have and the details I read on the AOKP release page, I saw nothing that indicated I _couldn't_ run LeanKernel, especially when it was only a point release on the same ROM I was previously using.
I had a look at the changelog that's available on their page. It's pretty lame. http://gerrit.sudoservers.com/#/q/status:merged,n,z that one will probably have the kernel info. A good rule of thumb is when you flash a new rom, wait until the kernel is up to date (release date). For instance, don't flash a 3/01 kernel on a 4/24 rom - wait for kernel update.
I don't recommend flashing anything with the 3.4 kernel right now. Even if you manage to pull off stability, it's still laggy and eating about 3x the battery it should. This goes for the custom kernels, too. I'll put up with stability issues, but can't deal with bad battery. Already bad enough as it is. Need my phone during the day and not near a charger.
chuffykow said:
Thank's for the condescension, I appreciate being called lazy. I might not have an encyclopedic knowledge of Everything Android, but between the knowledge I do have and the details I read on the AOKP release page, I saw nothing that indicated I _couldn't_ run LeanKernel, especially when it was only a point release on the same ROM I was previously using.
Click to expand...
Click to collapse
calm down lol, you could have read up any of the kernel threads that there are some compatible issues with kernels and roms right now.
Aerowinder said:
I had a look at the changelog that's available on their page. It's pretty lame. http://gerrit.sudoservers.com/#/q/status:merged,n,z that one will probably have the kernel info. A good rule of thumb is when you flash a new rom, wait until the kernel is up to date (release date). For instance, don't flash a 3/01 kernel on a 4/24 rom - wait for kernel update.
I don't recommend flashing anything with the 3.4 kernel right now. Even if you manage to pull off stability, it's still laggy and eating about 3x the battery it should. This goes for the custom kernels, too. I'll put up with stability issues, but can't deal with bad battery. Already bad enough as it is. Need my phone during the day and not near a charger.
Click to expand...
Click to collapse
Thanks for the tip! I appreciate it.
Hi
Guys i need your help. Pleas can someone tell me for now what mods is much better for I927R (Also withe very stability and with much less bugs) ?!
I found Liquid Smooth but it have some problem so i need your guide about other mods.
Thank you
ICS Roms are the best and most stable... Stock ICS from AT&T UCLJ3 or any roms based off of it ... Dman's daily driver, Ice Pop Rom by RawRaw, LiteRom by TheGreaterGood...
Unfortunately none of those are being maintained but I had been running Dman's for the last couple months, great battery life when paired w/ JuiceDefender (20+hours of heavy use when I'm not sleeping).
Now the newest CM10.1 by Spyke seems pretty solid ... Just a couple of issues.
ICS is the only one you'll get bug free, though. Stock is hard to compete with when we're pairing up roms without a true Devdeloper.
On this subject, I've just reverted back to using IcePop ROM after (unhappily) downgrading from Spyke's latest 10.1 ROM - just mainly because of the Bluetooth headset issue, which I really need working for work purposes.
I'm just wondering if there are any ICS builds that have GPS working correctly? I tried flashing the Rogers modem (since my phone was originally a Rogers import, flashed to AT&T ICS, then played with ICS from there) and first time I ran GPS status it took 771 seconds... I'm going to keep trying just in case that was the first time only, but 12 minutes is still a very long time for an initial fix .
Also - I've found that I'm getting more and more bootloop problems even with clean installs - so wiping cache, data, dalvic, etc. Is there some way to do a *thorough* wipe without bricking the phone? I can back all my data up no worries, but next time I move to JB (in the optimism that the BT issues will be fixed soon, judging by the positive progress being made by Spyke ) I would like to do a clean build from scratch and not have to gamble being able to start the phone up again
David - I always go into mount options of CWM and format /system prior to a new flash .. I'm not sure if flashing with Odin will get rid of any previous settings, its something to attempt though.
I, also, had reverted to using JB Because GPS wouldn't work ... There's a thread in here (search for it) that shows the solution to the GPS fix, its editing sirgps.conf and gps.conf ... I was getting a fix on GPS in under 30 seconds.... GPS was a huge let down in the stock ICS rom, Even when using TheGreaterGoods LiteRom w/ GPS fix I found after a couple of days my gps didn't hold....
Thanks for the reply.
I was considering formatting /system this morning when I was getting stuck in a boot loop from trying to get M3 running, but decided it was a risk I'd have to check up on first . Next time I do a build from scratch (I'm going to resist until the BT stuff is working - fingers crossed!) I'll do that.
I remember having a look at the gps.conf fix but don't recall anything about sirgps.conf - so I will look it up, thanks!
As an aside, I've been checking the GPS fix a couple of times since my last post and it is coming up in under 30 seconds each time... I'm wondering if my attempt to flash the Rogers modem did in fact fix the issue... I'd do a reboot but I'm too scared I won't get the phone up again XD
EDIT:
Found the fix, I did a few of the changes (rather than all of them), and it's now picking up 8 satellites instead of 3-5, and getting a stronger signal from each... and all I did was point it to the AU ntp server, and tell it I'm not on the ATT network . I'll save the suggested settings to a text file on my SD card so next time I'm out and about and if it plays up I'll have access to the details.
yohan4ws said:
David - I always go into mount options of CWM and format /system prior to a new flash .. I'm not sure if flashing with Odin will get rid of any previous settings, its something to attempt though.
Click to expand...
Click to collapse
Had to restart my phone tonight and got caught in a boot loop again... after trying a few things I flashed Lite Kernel (I'm still using ICS again at the moment) and that seems to have solved the boot loop issues. I'm thinking that with all the ROM flashing I've been doing the fact that I actually had the phone running without flashing an ICS specific kernel (after running JB) was screwing things up.
Interestingly though, I tried installing Spyke's M3 ROM from a complete user wipe, system format, everything gone - and I still got a boot loop so next time I try it I'll grab a copy of LiteKernel and do that separately.
davidpartay said:
Interestingly though, I tried installing Spyke's M3 ROM from a complete user wipe, system format, everything gone - and I still got a boot loop so next time I try it I'll grab a copy of LiteKernel and do that separately.
Click to expand...
Click to collapse
That has to be very concerning to you, I've never had an issue booting any ROM. And very strange flashing the Kernel separately would resolve your booting issues...
Did you try to flash any of the stock roms w/ Odin ? I have read that we can only flash back to stock Gingerbread from JellyBean if we flash a GB or ICS CWM ROM and then go back with Odin otherwise there will be boot issues.
If I were in your position I would try and do a full revert back to the earliest version of gingerbread I could find on samfirmware and then use Kies to udpate - THEN I would retry flashing to a newer JB or ICS Rom.
Pretty time consuming but that is the price we pay to mod
davidpartay said:
Had to restart my phone tonight and got caught in a boot loop again... after trying a few things I flashed Lite Kernel (I'm still using ICS again at the moment) and that seems to have solved the boot loop issues. I'm thinking that with all the ROM flashing I've been doing the fact that I actually had the phone running without flashing an ICS specific kernel (after running JB) was screwing things up.
Interestingly though, I tried installing Spyke's M3 ROM from a complete user wipe, system format, everything gone - and I still got a boot loop so next time I try it I'll grab a copy of LiteKernel and do that separately.
Click to expand...
Click to collapse
My phone has an issue, simple I couldnt reboot it, I must power off and wait a little. You can try it when you flash something, just remove battery and usb cable, and wait 2 minutes, before you turn on.
yohan4ws said:
Did you try to flash any of the stock roms w/ Odin ? I have read that we can only flash back to stock Gingerbread from JellyBean if we flash a GB or ICS CWM ROM and then go back with Odin otherwise there will be boot issues.
Click to expand...
Click to collapse
Not yet. I'll have to check which ones I have - I'm certain I have the AT&T ICS rom from November but then I'd have to go digging through my email for the unlock code again, so I'm trying to avoid doing that at this point . If i can find the stock GB Rogers rom at some point I might flash that one back on before I do any more upgrades. The phone is up and running at this point though, so I'm not too fussed. I've also noticed that it's a little quicker than before so I think the version of LiteKernel I installed was a good idea anyway.
bubor said:
My phone has an issue, simple I couldnt reboot it, I must power off and wait a little. You can try it when you flash something, just remove battery and usb cable, and wait 2 minutes, before you turn on.
Click to expand...
Click to collapse
I've tried pulling the battery a few times, but probably no longer than 30 seconds. Next time I'll give it a couple of minutes. I tend to do this late at night when I'm not expecting any calls (except fire brigade but I have a pager for that too) so time without a phone is no issue to me
Yesssss
After much irritation at continually getting stuck in boot loops again, I've 'Oneclicked' the phone twice, got fed up with the AT&T ICS ROM within about 5 minutes, gave up on IcePop because of buggy GAPPS...
And thought, bugger it. Format /system. Factory reset. Clear cache + Dalvik. Installed in this order:
Jellybean 4.2 ROM from 0217
Spyke's M3 update
PAC rom
GAPPS dated 0427
"Kick-ass Kernel"
and it BOOTED FIRST GO
I am pleased
Does JB need already to be installed before putting the M3 revisions on? Maybe that's where I've been going wrong all along, because my attempts at running both the standard M3 and PAC ROM (even immediately after OneClicking) resulted in boot loops or eternal boot loading.
Uhh... what do you mean by "One Clicking" ??
I know there's a "superoneclick" that will flash and root the rom all at once, but I never personally found it to work for our glides.
Using CWM and installing the ROM through the CWM boot menu is severaly key presses so ... not too sure what you're referring to.
Also, I've always downloaded to a hardwired computer then copied over USB to my phone and flashed ... sometimes the download will have errors if I grab it from my phone.
I'm assuming it's a variant of SuperOneClick... The title is 'Odin3Excution v1.85' and then underneath it says 'I927UCLG9_OneClick'.
And it worked just fine, I did have a stock rom that I tried to flash with Odin but it kept giving me errors, the OneClick method worked.
davidpartay said:
I'm assuming it's a variant of SuperOneClick... The title is 'Odin3Excution v1.85' and then underneath it says 'I927UCLG9_OneClick'.
And it worked just fine, I did have a stock rom that I tried to flash with Odin but it kept giving me errors, the OneClick method worked.
Click to expand...
Click to collapse
Interesting... for future reference, www.samfirmware.com has the stock firmwares, then there's the superUser file floating around the forums that allows you to root by flashing it. Passed that, remove bloat.
Glad you got it working! Welcome to JB
What's up everyone? I am having a strange problem when trying to flash just about any kernel on my N7. While I'm not a developer or anything, I'm not new to flashing ROMs or Kernels by far. In fact, my love affair with smartphones began when I got an HTC Apache with Windows Mobile 5. Anyway, every time I try to flash a kernel, it will show successful, and then the phone will boot into a fuzzy/pixelated light blue screen. Eventually, this screen will go away and my device will be pretty much locked up. All the images will have turned blue and orange, and the only way for me to get back into recovery will be to hold volume down + power, until the phone shuts off. The only kernel I have had any success with is Glitch, and I have even had this happen with it a couple times.
I always make sure to read through the instructions, and have done lots of searching here, and via Google. After I flash a rom, I will make sure the N7 boots up, and works properly, then reboot into recovery, do a full wipe, and flash the zip from TWRP. My most recent attempt was with Buttered AOKP w/Aroma installer. It walks you through the steps in a manner that should make this easy for anyone. It give you the option to wipe cache and kernel, which I always do, but no go. The only way I can get Glitch to run on it, is to complete the whole process twice.
Sorry if the answer is right under my nose, but I couldn't take it anymore and had to ask. I've never once bricked a device, nor have I had issues flashing kernels on any device before. Somebody please restore my sanity!!! I didn't have much to begin with.
yamus08 said:
What's up everyone? I am having a strange problem when trying to flash just about any kernel on my N7. While I'm not a developer or anything, I'm not new to flashing ROMs or Kernels by far. In fact, my love affair with smartphones began when I got an HTC Apache with Windows Mobile 5. Anyway, every time I try to flash a kernel, it will show successful, and then the phone will boot into a fuzzy/pixelated light blue screen. Eventually, this screen will go away and my device will be pretty much locked up. All the images will have turned blue and orange, and the only way for me to get back into recovery will be to hold volume down + power, until the phone shuts off. The only kernel I have had any success with is Glitch, and I have even had this happen with it a couple times.
I always make sure to read through the instructions, and have done lots of searching here, and via Google. After I flash a rom, I will make sure the N7 boots up, and works properly, then reboot into recovery, do a full wipe, and flash the zip from TWRP. My most recent attempt was with Buttered AOKP w/Aroma installer. It walks you through the steps in a manner that should make this easy for anyone. It give you the option to wipe cache and kernel, which I always do, but no go. The only way I can get Glitch to run on it, is to complete the whole process twice.
Sorry if the answer is right under my nose, but I couldn't take it anymore and had to ask. I've never once bricked a device, nor have I had issues flashing kernels on any device before. Somebody please restore my sanity!!! I didn't have much to begin with.
Click to expand...
Click to collapse
Flashing a CAF kernel on an aosp Rom or a aosp kernel on a CAF Rom. What Rom are you on? (cynanogen based roms are CAF)
Sent from my Nexus 7 using Tapatalk 4
xfrancis14 said:
Flashing a CAF kernel on an aosp Rom or a aosp kernel on a CAF Rom. What Rom are you on? (cynanogen based roms are CAF)
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Currently on: [ROM] Buttered Flo AOKP 4.3.1 [+Aroma] [2013-10-12]
It has all the kernels built into the aroma installer, so I would assume they are all compatible. Some more than others.
I got 3.4.1 Glitch-Flo to run on it, but had to return phone to stock, and flash twice, to get it to work. The aroma installer also has the option to use Faux Kernel in one of three flavors. I tried the "Ultra CCCCCCOMBO" first, and then the "Enhanced Stock", but no go.
When I go to the thread for both kernels, it says they are CAF kernels, but it's kind of strange they they would be included as an option in the rom. I have tried a few other roms, with various kernels too, and not had any luck. I want to get a log to post, but I'm not sure if I will be able to pull it via ADB, when the device is pretty much unresponsive.
Thanks for your response, and let me know if what you think about the CAF kernels being inlcuded with the AOKP rom.
Thanks,
Yam
Sooooo..... Isn't aokp based of the cm kernel? If that's the case, any of the kernels I am trying should work. I would post this in the ROM thread, but its happened with just about every ROM kernel combination in have tried. What's the dealio
Any update on this? I am having the exact same problem with my Nexus 4 running ProBAM 2.0 ROM. I have tried flashing every kernel and every version possible and it either freezes before boot (Google logo) or I get the blue screen... help anyone? I really want to flash a kernel with FauxSound, that's really all I want. Thanks so much!
Q&A for [ROM][UNOFFICIAL] CyanogenMod 11 Nightlies / Releases [M11]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
my desire hd cant boot when i swich to ART mode
Mustaavalkosta said:
General:
These are UNOFFICIAL CM11.0 Kitkat Nightlies / Releases brought to you by AceEnablementProject and TeamCodefire as a continuum to CM10 and 10.1 nightlies. Builds are generated automatically each night. Process starts around 00:30 PDT. If it fails, then there will be no build until the reason for failure is taken care of which can take time. Latest 12 nightlies will be kept on the server. If you want a longer history of them, you are free to archive them yourself.
Thanks and credits:
Andromadus
CodeAuroraForum
CyanogenMod
BananaGranola
Epic Beard Men
eXistZ
Flemmard
Flinny
goo.im
Juansheng
paulb_nl
randomblame
synergye
TeamCodefire (for build server and hosting, priceless)
All the rest that have helped to construct these builds and develop software for ace directly or indirectly in the past.
Githubs:
CyanogenMod
AceEnablementProject
Changelogs:
CM Gerrit
CM Google+
Github (see above)
Installation instructions:
Download Nightlies / Releases [BasketBuild mirror]
Download gapps from here. Pico/Nano/Micro recommended, Mini/Full/Stock doesn't fit in our system partition after the ROM has been installed.
Put the files on SD card.
Reboot to recovery.
Do factory reset (ie. format /data, /cache, /sd-ext and /sdcard/.android_secure)
Flash cm-11-YYYYMMDD-UNOFFICIAL-ace.zip
Flash gapps zip
Remember to reflash boot.img via fastboot if you are HTCDev unlocked.
Reboot and enjoy.
Update instructions:
Download Nightlies / Releases [BasketBuild mirror]
Put the file on SD card.
Reboot to recovery.
Flash cm-11-YYYYMMDD-UNOFFICIAL-ace.zip
Remember to reflash boot.img via fastboot if you are HTCDev unlocked.
No need to flash gapps as CM backuptool script should take care of them. (Results may vary depending on which gapps package you are using.)
Reboot and enjoy.
InspireMod
http://downloads.codefi.re/mustaavalkosta/inspiremod
Kernel
Source: github
Compiler: stock AOSP gcc-4.7
Branch: cm-11.0
Kernel Version: 3.0.101
defconfig: spade_defconfig
Contact:
My Google+
My twitter
#codefireX @ freenode
Donations:
For hosting: codefi.re (use the donation button at the bottom of the page)
I don't really need your money right now but if you insist on donating to me I suggest you donate that money to EFF instead here: https://supporters.eff.org/donate
Q&A:
Q: I tried to flash the ROM and got this:
Code:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/..path od ROM.zip
(Status 7)
Installation aborted.
A: Update your recovery to one that is compatible with new recovery functions. See the list below.
4EXT Recovery Touch v1.0.0.6 RC 3 or newer
CWM 6.0.4.8 Advanced Edition / PhilZ Touch 6.29.8 or newer
TWRP 2.7.1.0 ACE or newer
Q: I've used HTC Dev unlock and flashed the rom but it won't boot. What should I do?
A: You need to extract boot.img from the zip and flash it via fastboot. If you don't have fastboot executable anymore from flashing recovery, install Android SDK platform tools (Linux users should find it from distro's package management) and then reboot to bootloader, open command prompt and navigate to the location you extracted your boot.img and type:
Code:
fastboot flash boot boot.img
You need to repeat this everytime you flash new version of this rom to ensure everything will work fluently as long as you have just basic HTC Dev unlock.
Q: Where are my developer and performance options?
A: http://goo.gl/jpS8r
Q: Feature X doesn't work, let's make 1000 posts about it to annoy everyone.
A: Please, dont. Use search and then use search again and only then report your problem with necessary logs. [Logcat guide, thanks to MusikMonk for the link]
Q: I hate you for not fixing this issue X!!!
A: I love you too.
Q: How I can build CM11.0 myself?
A: Setup a basic Android build environment.
Code:
mkdir cm11
cd cm11/
repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0
mkdir -p .repo/local_manifests
wget https://github.com/AceEnablementProject/android/raw/cm-11.0/local_manifest.xml -O .repo/local_manifests/cm_ace.xml
repo sync
cd vendor/cm/
./get-prebuilts
cd ../../
. build/envsetup.sh
lunch cm_ace-userdebug
mka bacon
Once the build finishes you'll find your goods from out/target/product/ace/ directory.
Q: Something about something something something.
A: Ask the guy/gal next to you.
XDA:DevDB Information
[UNOFFICIAL] CyanogenMod 11 Nightlies / Releases [M11], ROM for the HTC Desire HD
Contributors
Mustaavalkosta, paulb_nl
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: M11
Beta Release Date: 2014-10-08
Created 2014-04-11
Last Updated 2014-10-09
Click to expand...
Click to collapse
some saids it`s because the partition of cache is too small
CM11 latest release freezes after first reboot
GD to all. I am trying to install CM11 latest release, first time starts ok, but after reboot it doesn't start, freezes with black screen before bootanimation. Tried to flash boot.img via ADB & also tried to install CM 10.1 SR3, nothing helped, same situation. Waiting for your replies. Thx in advance.
Hey!
Would it be possible to you to add gpu overclock to that kernel?
Thx
Question about bugfixes
Hi,
at the moment i have M10 installed but i want to ask if there is a fix in M11 included which fixes sudden restarts.
My DHD restarts over night or when i want to something (it doesnt depends on what i am doing).
And another Problem sometimes the screen wont turn on when pressing the power button only the menu keys lighten up.
And i think it is more like off topic but how i can unlock the phone that i do not need to flash boot.img it is at the moment only HTC-Unlocked.
And very much thanks for this ROM it is great!
Thanks in advance for your answers
ag1707
Cannot dirty flash Nightlies
Hi
Since sometime around M11 release, I can not dirty flash nightlies on nightlies. The phone stuck at booting with the message "Android is upgrading / Finishing boot".
I'm using TWRP 2.7.1.0 for recovery.
1. Install Rom
2. Wipe Cache/Dalvik (I've tried without wipe too)
3. Reboot System
Am I missing something here?
I'm using non-English locale. Could it be the reason?
Best Regards,
Solved
Nanashi_anon said:
Hi
Since sometime around M11 release, I can not dirty flash nightlies on nightlies. The phone stuck at booting with the message "Android is upgrading / Finishing boot".
I'm using TWRP 2.7.1.0 for recovery.
1. Install Rom
2. Wipe Cache/Dalvik (I've tried without wipe too)
3. Reboot System
Am I missing something here?
I'm using non-English locale. Could it be the reason?
Best Regards,
Click to expand...
Click to collapse
Just figured it out that PA_GAPPS requires flash every update for recent ROMs.
Hi and thx for your rom!
I flashed the cm-11-20141008-UNOFFICIAL-M11-ace from releases, using twrp 2.7.1.0 for the recovery on a HTC Desire HD.
I am experiencing some lag when opening the screen or starting apps / widgets. It can take be almost instant up to 3-5 sec for the app to launch and be accessible (camera, gallery, weather, settings, mail anything really).
Also once in a while parts of the text in the screen get deformed (example here), any action by me (moving my finger around) or by the OS (some notification) fixes it.
As far as I can tell I followed your instructions properly. Is there anything I could try?
XZelin said:
some saids it`s because the partition of cache is too small
Click to expand...
Click to collapse
Possibly. There are some posts about this from paulb_nl on the main thread but I didn't find them right now. They are there though.
sky141 said:
GD to all. I am trying to install CM11 latest release, first time starts ok, but after reboot it doesn't start, freezes with black screen before bootanimation. Tried to flash boot.img via ADB & also tried to install CM 10.1 SR3, nothing helped, same situation. Waiting for your replies. Thx in advance.
Click to expand...
Click to collapse
Are you using the latest recoveries mentioned in the first post's Q&A section in the development thread? If your issue is what I think it is, full wipe with the previously mentioned recoveries should fix it.
_Bon_Bon said:
Hey!
Would it be possible to you to add gpu overclock to that kernel?
Thx
Click to expand...
Click to collapse
Is there working GPU OC for ace? I thought it was hardware locked thus can't be overclocked via software.
ag1707 said:
Hi,
at the moment i have M10 installed but i want to ask if there is a fix in M11 included which fixes sudden restarts.
My DHD restarts over night or when i want to something (it doesnt depends on what i am doing).
And another Problem sometimes the screen wont turn on when pressing the power button only the menu keys lighten up.
Click to expand...
Click to collapse
I haven't heard any complaints about frequent reboots. I know that there are those but it's been said to happen like once a week or so. M11 may change something if your issues come from corrupted devlog partition but if it's something else, then M11 won't do anything for your reboot issue.
Nihim said:
Hi and thx for your rom!
I flashed the cm-11-20141008-UNOFFICIAL-M11-ace from releases, using twrp 2.7.1.0 for the recovery on a HTC Desire HD.
I am experiencing some lag when opening the screen or starting apps / widgets. It can take be almost instant up to 3-5 sec for the app to launch and be accessible (camera, gallery, weather, settings, mail anything really).
Also once in a while parts of the text in the screen get deformed (example here), any action by me (moving my finger around) or by the OS (some notification) fixes it.
As far as I can tell I followed your instructions properly. Is there anything I could try?
Click to expand...
Click to collapse
It's a bit slow but I suppose that's understandable considering we are talking about 4 year old device. People have reported it gets slower the more apps you install. I'm not sure why.
I'm seeing that kind corruption on the screen graphics for the first time. Any chance of figuring out how to reproduce it and write step-by-step what to do so I could maybe replicate the issue on my end?
Mustaavalkosta said:
It's a bit slow but I suppose that's understandable considering we are talking about 4 year old device. People have reported it gets slower the more apps you install. I'm not sure why.
I'm seeing that kind corruption on the screen graphics for the first time. Any chance of figuring out how to reproduce it and write step-by-step what to do so I could maybe replicate the issue on my end?
Click to expand...
Click to collapse
Yea that is very much true, this might sound bad but would is there some other version you would recommend (even if it's a previous android release) which would be snappier? (your ROM so far is absolutely fine outside of that lag which as you stated is probably because DHDs hardware can't handle it).
As for that graphics glitch can't think of something, any apps were installed from play store (not restored by titanium for example) it happens on different ones but a lot more often on k-9 email client (from which the screenshot is).
If there is something that you would like me to try, feel free to tell me, though any action on the screen restores it to its normal way.
Nihim said:
Yea that is very much true, this might sound bad but would is there some other version you would recommend (even if it's a previous android release) which would be snappier? (your ROM so far is absolutely fine outside of that lag which as you stated is probably because DHDs hardware can't handle it).
As for that graphics glitch can't think of something, any apps were installed from play store (not restored by titanium for example) it happens on different ones but a lot more often on k-9 email client (from which the screenshot is).
If there is something that you would like me to try, feel free to tell me, though any action on the screen restores it to its normal way.
Click to expand...
Click to collapse
I don't mind people looking for better solution for their needs. You may want to try my CM10.1 builds which were noticeably faster if I recall correctly. I haven't been using other ROMs that much during the time I've kept my own stuff going here so I can't really recommend anything else. A fellow user may be a bit less biased to recommend other options.
I'll see if I can catch that graphical glitch with K-9 myself. Thanks for reporting it!
Mustaavalkosta said:
I'm seeing that kind corruption on the screen graphics for the first time. Any chance of figuring out how to reproduce it and write step-by-step what to do so I could maybe replicate the issue on my end?
Click to expand...
Click to collapse
I get that black boxes glitch with the standard Email app all the time. They usually go away in less than a second. I also checked for those when I was testing the 4.4 adreno drivers and it was still not fixed.
paulb_nl said:
I get that black boxes glitch with the standard Email app all the time. They usually go away in less than a second. I also checked for those when I was testing the 4.4 adreno drivers and it was still not fixed.
Click to expand...
Click to collapse
Oh ok. If it has been mentioned in the development thread, I've just probably forgotten about it.
Mustaavalkosta said:
I don't mind people looking for better solution for their needs. You may want to try my CM10.1 builds which were noticeably faster if I recall correctly.
Click to expand...
Click to collapse
Thanks! What would be the proper way to backup the whole "phone" so I can switch back and forth between roms? Atm I 'm only backing up apps & data with titanium.
Nihim said:
Thanks! What would be the proper way to backup the whole "phone" so I can switch back and forth between roms? Atm I 'm only backing up apps & data with titanium.
Click to expand...
Click to collapse
Doing a backup in recovery should be sufficient to backup everything except sdcard.
Mustaavalkosta said:
Are you using the latest recoveries mentioned in the first post's Q&A section in the development thread? If your issue is what I think it is, full wipe with the previously mentioned recoveries should fix it.
Click to expand...
Click to collapse
Thx 4 yours above. I'm using latest 4ext recovery touch + full wipe, of course. Will try to do something with partition.
Update from M11 to Nightly
It is possible to flash the newest nightly over the M11 release?
Or I need a full wipe.
Christian1987 said:
It is possible to flash the newest nightly over the M11 release?
Or I need a full wipe.
Click to expand...
Click to collapse
Well, generally it's recommended to wipe if you switch from one to another but it may work in this case without wiping. Make a nandroid backup and try it.
My battery dies really fast. Do you guys have a recommendation in terms of which battery to get? Link it here. Thanks.
prufessor_oak said:
My battery dies really fast. Do you guys have a recommendation in terms of which battery to get? Link it here. Thanks.
Click to expand...
Click to collapse
You can get original Desire HD battery on ebay cheaply, no point looking at other batteries which cost almost the same. Just look for one in your region.
Install Wakelock Detector from the Play store and find out what is causing your battery drain. Depending on phone use it should be able to last all day, 2 days if just left on standby all the time. Screen on all the time will be around 3-4 hours.