Related
I really need to get the right drivers for the Iconia A100 and i need um soon. I searched alot and there all dead links or ads now.
I just attempted to port a 4.1.2 rom from another tab, I get past the install and sit at the boot animation, no damn adb cause i did a reinstall on the computer and they got lost in the hundreds of zip files in my downloads.. And I cant get a logcat, I know I can get this booting and its freaking sweet. Its based on pio_masaki's Jellytime Final, and a mixture of ParanoidAndroid Roms. If i get it going its getting posted. Anyone wanna help on the testing just ask here or pm me.
Thanks in Advance.
I do need an xml person, I hate them ....:silly:
I have built and slightly tweeked CM 10.1 but to be honest, it does drain that battery quite a bit and sometimes it freezes in landscape mode.
So I sync'ed up the source for the AOSP and then I realized that I needed binaries and I don't have the stock ROM to extract them from.
Are these "Galaxy Nexus (Sprint) binaries for Android master (20130603)" the right binaries for SPH-l710 ?
Under the Toroplus section at the very bottom of this page https://developers.google.com/android/nexus/drivers
Basically I just want try moding from stock because of the battery thing, I need to add Arduino support and maybe tweek USB or write an app, so that my phone can hook up over usb to an Arduino board and chit chat. I want the Arduino to control motors while Android gathers sensor data and decides where to go, Arduido will just follow orders. Anyways, battery consumption is huge in this project.
EDIT-1: Also, what version of Android are the 20130603 binaries for?
These are the binaries
https://github.com/themuppets/proprietary_vendor_samsung
d2spr folder.
That's not all you need to build for our device though.
I suggest just building an existing rom rather than syncing AOSP....you're gonna need to make a TON of edits to even get it to build, much less boot. I know because I'm very much involved with a new AOSP rom called omnirom and bring ups for that rom. It's not easy. We're still making edits to the source to even get it to build for non-nexus devices
CNexus said:
These are the binaries
https://github.com/themuppets/proprietary_vendor_samsung
d2spr folder.
That's not all you need to build for our device though.
I suggest just building an existing rom rather than syncing AOSP....you're gonna need to make a TON of edits to even get it to build, much less boot. I know because I'm very much involved with a new AOSP rom called omnirom and bring ups for that rom. It's not easy. We're still making edits to the source to even get it to build for non-nexus devices
Click to expand...
Click to collapse
hmm
I thought it would be a lot easier than it has been to build a stock rom, but I guess not, I am not trying to build kit-kat though, I want to build for 4.1.2 as I think thats where their updates left off but maybe I am way outta the loop.
What about the factory images? Are those flashable with the "flash-all.sh" over fastboot? Idk either way I haven't been able to get fastboot working, I don't think I have even been able to boot into fastboot, when I "adb reboot bootloader" I go to what looks like Odin's download mode, and when I do the volume up+down+power I just boot into "safe mode" and get to the launcher like normal but its in safe mode. I rooted it on Windows about a half a year ago or so using Odin and some dude's tuts on YouTube "High on Android" or something. I haven't really studied rooting so I guess thats my bad not knowing really what I was doing, but I haven't looked back and wouldn't be here now if it wasn't for it.
I'll take your word for it but I am going to keep trying to figure it out, Figureing out all this proprietary stuff is tuff, maybe I should get a device or board targeted to developers lol, didn't know Id ever say that, I thought I was going to major in Chemistry.
Edge-Case said:
hmm
I thought it would be a lot easier than it has been to build a stock rom, but I guess not, I am not trying to build kit-kat though, I want to build for 4.1.2 as I think thats where their updates left off but maybe I am way outta the loop.
What about the factory images? Are those flashable with the "flash-all.sh" over fastboot? Idk either way I haven't been able to get fastboot working, I don't think I have even been able to boot into fastboot, when I "adb reboot bootloader" I go to what looks like Odin's download mode, and when I do the volume up+down+power I just boot into "safe mode" and get to the launcher like normal but its in safe mode. I rooted it on Windows about a half a year ago or so using Odin and some dude's tuts on YouTube "High on Android" or something. I haven't really studied rooting so I guess thats my bad not knowing really what I was doing, but I haven't looked back and wouldn't be here now if it wasn't for it.
I'll take your word for it but I am going to keep trying to figure it out, Figureing out all this proprietary stuff is tuff, maybe I should get a device or board targeted to developers lol, didn't know Id ever say that, I thought I was going to major in Chemistry.
Click to expand...
Click to collapse
All of the downloads on the Google site are for and will only work with nexus devices
Those proprietary files are the bare minimum to "inject" our device's characteristics into a rom. That's how I ported Sense actually
CNexus said:
All of the downloads on the Google site are for and will only work with nexus devices
Those proprietary files are the bare minimum to "inject" our device's characteristics into a rom. That's how I ported Sense actually
Click to expand...
Click to collapse
Makes Sense.
So if I am learning anything... I would need binaries ("blobs"), I am sure Sprint, Google, and Samsung proprietary apps, and the nessiccary make (Android.mk) files, maybe some kernel patches and/or kernel object files, and hopeful to all hell I don't have to do too much XML modification I need to go find a trust-worth factory zip for the sph-l710 and rip everything I need out of that, and the bootloader I need to get it all back to stock eventually in case kit-kat does get updated by the Samsung (I am guessing thats whose hands it is in, I think they have a counter), who knows maybe the open source community will get there first.
Thanks for your help, saved me a ton of hassle.
I came upon this device on Christmas (a gift from my girlfriend to her father) and wanted to root it and also install clockworkmod recovery, so I could mess with it a bit without bricking it. Since I found a lack of tailored guides for it, I decided to write this one, although I really did no actual development whatsoever. Normally I would be posting this on general, but given the spirit of this forum, I guess I'll just leave it here. Also, keep in mind I don't have the device anymore and am writing this from memory. If I missed anything or you have any doubts, please let me know (for example, I can't recall specifically the drivers I installed to make it work properly).
Please, please read the whole guide before trying anything, and if you are a novice user, just leave this be, I don't want you to turn your tablet into a paperweight because of my shoddy instructions written from memory and you probably don't need any of this anyway as there are no custom roms yet.
!!!DISCLAIMER!!!: As stated above, anything you do is at your own risk. I provided the procedures that worked for me on a Qilive 97r tablet, which is an Auchan branded ARCHOS 97b Platinum HD, so my step by step should work for all of you. There are probably easier ways to do this, and I hint at them in the guide, but beware I have not tried them and cannot vouch for them. In fact, I cannot and will not take any responsability if you brick your device following these instructions, correctly or otherwise. You do this at YOUR OWN RISK. You have been warned!
Rooting:
I followed this guide on Windows 7 x64 and it worked perfectly.
So thanks to dhigby for that. I would just like to make a couple of remarks:
When you get to step 7 (Installing Superuser by ChainDD), don't. Install SuperSU by Chainfire instead, Use it to update the superuser binary (I think a prompt shows up) and when asked, let it delete the "other" superuser applications, that is, the chinese one. Clean and easy, you don't need to follow any more steps.
Congratulations, you now have (english language) root!
Clockworkmod Recovery:
There is no specific recovery for this device. Fortunately, thanks to AndroTab.info, there's a generic version for 3188 devices that you'll see should work quite nicely, albeight with some caveats.
What works:
Nandroid backup to/from external SDCard (won't recognize internal)
Installing zip files should also work, although I didn't try it at the time, as the device wasn't mine and I can't since I don't have it anymore, but since it mounts system partitions perfectly well I wouldn't think there would be a problem. Try it at your own risk though.
Other things probably work, give it a try.
What doesn't work:
Internal SDCard access
Probably other things
Installation:
Now that you have a rooted tablet, installing clockworkmod recovery is easy-peasy. Go to developer options and enable USB Debugging, then make sure you have a working adb daemon (look it up) that recognizes your tablet.
NOTE: I'm not sure if I had to install any specific drivers for this to work, I think if so they were installed while rooting by the chinese app. Anyhow, here's the Rockchip drivers, you might want to try to install them if you can't get a connection: http://www.rockchip.nl/downloads/
Download the file RK30GENERIC_CWM.zip from here - that's the recovery.
Now extract flash_image and recovery.img from the downloaded file above to the folder where you have your adb and follow the following commands.
Push the files to /dev partition on the device:
Code:
adb push flash_image /dev/
adb push recovery.img /dev/
Then enter root shell, like so:
Code:
adb shell
su
Now flash recovery.img into recovery partition with flash_image:
Code:
chmod 755 /dev/flash_image
/dev/flash_image recovery /dev/recovery.img
Now power off your device. To enter recovery press volume down then the power button and keep them pressed until CWM boots. Voilá!
NOTE: The instructions above were adapted from here and all credit goes to AndroTab.info ; I posted these particular instructions because they are the ones I used and worked for me; there are other methods listed on that page which might or might not work, TRY THEM AT YOUR OWN RISK.
Backing up your original recovery (for warranty, if anything goes wrong, etc.)
To obtain a backup image of your recovery \ restore it back afterwards, follow this guide here. All credit goes to Originalas.
Don't follow it to the letter though: first and foremost, you need a working linux installation. If you don't have one, I recommend Wubi.
Then:
Follow step 1;
Ignore step 2 (it's outdated);
Follow 3;
Follow 4 - but don't expect the screen to turn on, it won't, just hold the volume down button for 10 seconds or so after plugging it in, don't press the power button!
Ignore 5, 6 and 7
Follow 8, but don't use the last command to flash the CWM recovery onto the device. This is because since it is a generic version, it relies on the original recovery kernel. Flashing the image like stated in step 8 would probably overwrite the kernel and result in no recovery at all (I might be wrong about this).
Do follow the last command to restore your own backup if you ever need to.
I am unsure if recovery dumps obtained in this way are device specific; I don't see a reason why they should be, so I'll provide you with my own backup:
ORIGINAL RECOVERY
Flash through any method of your choice, but keep in mind I haven't tried this on other devices, so, as you know by now DO IT AT YOUR OWN RISK.
Closing remarks:
There you have it. Sorry for not holding your hand through every step, but this is meant for people who know a bit of what they're doing, making it faster than having to look up and figure out all these things and quirks on their own. If you have any doubts don't hesitate to ask, but keep in mind I don't have the device anymore and don't know much more than what I have written here. I do appreciate feedback and corrections, and will gladly change the guide giving you full credit - if it's really urgent just PM me, I might not check this thread often.
Cheers!
thanks, works like a charm...do you have any news about updates\custom roms? I can't find anything even in the archos main site
Jammed_Death said:
thanks, works like a charm...do you have any news about updates\custom roms? I can't find anything even in the archos main site
Click to expand...
Click to collapse
I wouldn't keep my hopes up on custom roms. The software is really bad and what it does with the hardware is terrible. It's like a bunch of chipmunks put the code together by randomly typing into a keyboard.
That said, the likelihood of a new kernel to fix that is next to nil. However, since the ROM is as far as I can tell pretty near stock, you can get a pretty good experience from the device by installing gravity box xposed module. I also recommend trickstermod and changing the governor to performance, as well as some kernel tweaking if you know what you are doing.
Also, very important, limit the amount of processes running in the background to 3 in dev settings or change the used memory limit to something like 1.2 gb. It has 2 gb of RAM, but, as I said, the ROM sucks, the system eats away a full gigabyte, and it doesn't effectively kill background apps, leaving you with a sluggish device if you multitask.
Anyway, those are just some ideas, if you have some more or would like to code for this device, feel free to share Also, as I always say, give it time. You never know who is gonna get they're hands on the device and do something amazing with it.
Newbleeto said:
I wouldn't keep my hopes up on custom roms. The software is really bad and what it does with the hardware is terrible. It's like a bunch of chipmunks put the code together by randomly typing into a keyboard.
That said, the likelihood of a new kernel to fix that is next to nil. However, since the ROM is as far as I can tell pretty near stock, you can get a pretty good experience from the device by installing gravity box xposed module. I also recommend trickstermod and changing the governor to performance, as well as some kernel tweaking if you know what you are doing.
Also, very important, limit the amount of processes running in the background to 3 in dev settings or change the used memory limit to something like 1.2 gb. It has 2 gb of RAM, but, as I said, the ROM sucks, the system eats away a full gigabyte, and it doesn't effectively kill background apps, leaving you with a sluggish device if you multitask.
Anyway, those are just some ideas, if you have some more or would like to code for this device, feel free to share Also, as I always say, give it time. You never know who is gonna get they're hands on the device and do something amazing with it.
Click to expand...
Click to collapse
hi and thanx for the answer
yes i saw that it's almost stock but crappy optimized...in the very first start of the tablet i had 1.8gb occupied by nothing and clean master always notifies me that 90% of the ram is busy...meh
maybe just a kernel will fix like you say but you know, android 4.4 will be a must (rockchip already released sdk for 3188). I am not a coder (totally zero) but i will try your suggestion...just a question about the performance governor, does it drain more battery?
i am trying to backup my rom but cwm is so buggy...first was impossible, now i'm stuck on backing up boot image
there is a twrp available for this tablet?
solved
ehy can someone provide a stock rom for the qilive 97r? I'm using a omni 4.4.4 but i want to rever back
thank you
Dump stock ROM QiLive 97R
Jammed_Death said:
ehy can someone provide a stock rom for the qilive 97r? I'm using a omni 4.4.4 but i want to rever back
thank you
Click to expand...
Click to collapse
Yes, i have one. How could i send to you?
Could we change your Omni stock ROM by mine?
I have tried ROM Archos 97b Platinum but touch screen is not working. The only possibiliti to work is by a USB Mouse.
Many thanks.
Redinpais said:
Yes, i have one. How could i send to you?
Could we change your Omni stock ROM by mine?
I have tried ROM Archos 97b Platinum but touch screen is not working. The only possibiliti to work is by a USB Mouse.
Many thanks.
Click to expand...
Click to collapse
you can upload it on mega or gdrive or something like that
for the omni come here, http://forum.xda-developers.com/showthread.php?t=2310818
author thread with links and guides I think you can even try the fixes with your current rom but better ask oma
about the cwm, there is a way to mount sdcard?
Dump stock ROM QiLive 97R
Jammed_Death said:
you can upload it on mega or gdrive or something like that
Click to expand...
Click to collapse
Here he are...
https://www.wetransfer.com/download...556a9cf8fdbc6ddd7ab35ab820141126224717/09298e
Is only available until Decenber, 3 ,so Download it now.
Jammed_Death said:
for the omni come here, http://forum.xda-developers.com/showthread.php?t=2310818
author thread with links and guides I think you can even try the fixes with your current rom but better ask oma
Click to expand...
Click to collapse
I've been watching but I can not understand. Is confused. There are many files and do not know what to do to "fix".
If you are Portuguese, I would like to talk to you on Skype.
Can be?
Jammed_Death said:
about the cwm, there is a way to mount sdcard?
Click to expand...
Click to collapse
I don´t know how I can answer that. I'm new in android, so I sorry.
Jammed_Death said:
thanks, works like a charm...do you have any news about updates\custom roms? I can't find anything even in the archos main site
Click to expand...
Click to collapse
Try this. Sooooooooo beautiful.:good:
(Because this - "To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!" i can not put link now. So ask me by Skype) SORRY
:victory:
Follow the instrutions ther and enjoy KK 4.4.2 Oma ROM Iron KK v1.2 - 24-05-2013 (My QiLive say now - Nexus 7 :angel:
Regards
Qilive 97r
Hi guys , if any body can help me with my tablet Qilive 97r, when I tryed to install new rom via RK development tool there was an error, and my tablet do not booting any more, just black display, do not know what to do, maybe somebody know where I can download original rom , and original installer, I will be thankful for that's.
Denysorlyk said:
Hi guys , if any body can help me with my tablet Qilive 97r, when I tryed to install new rom via RK development tool there was an error, and my tablet do not booting any more, just black display, do not know what to do, maybe somebody know where I can download original rom , and original installer, I will be thankful for that's.
Click to expand...
Click to collapse
I'm interested
please ROM stock
Hello, i need help , if somebody know where I can download original rom , and original installer, I will be thankful for that's.
Hi all.
Couple things.
1. I'm a noob here and to tweaking anything Android.
2. From all the forums I read you're all a lot smarter than I am.
-------------------
Issue: I bought a Samsung S6 (Sprint SMg920P) in June. Got it wet in July, not a lot but enough for Sprint to send me on my way to deal with it on my own.
I did let it dry out and it's worked fine all the way until about a week ago. I'm not even sure the water is really related to the issue. However, The phone began to boot loop and would not come out.
Recovery mode would only display the initial splash screen then freeze, and has never been accessible.
Download mode IS accessible.
I've downloaded ODIN.
I've tried downloading some files; G920P_SPR_G920PVPU3BOI1-G920PSPT3BOI1_Original, G920PVPU2BOF7_G920PSPT2BOF7_SPR and ran them per some tutorials, but that didn't help.
Again, I'm new and don't know if those files are even right. (ignorance is bliss I suppose - unless you want to accomplish something)
I'm hoping someone can spoon feed me the knowledge here based on your experiences.
What files should I be downloading (links(?)) and do you have any tip/tricks on resolution?
I appreciate any help here as I've had to downgrade to a Moto Photon from 2011 and it's absolutely excruciating to use.
Thanks yall!
EcryptedGimick said:
Hi all.
Couple things.
1. I'm a noob here and to tweaking anything Android.
2. From all the forums I read you're all a lot smarter than I am.
-------------------
Issue: I bought a Samsung S6 (Sprint SMg920P) in June. Got it wet in July, not a lot but enough for Sprint to send me on my way to deal with it on my own.
I did let it dry out and it's worked fine all the way until about a week ago. I'm not even sure the water is really related to the issue. However, The phone began to boot loop and would not come out.
Recovery mode would only display the initial splash screen then freeze, and has never been accessible.
Download mode IS accessible.
I've downloaded ODIN.
I've tried downloading some files; G920P_SPR_G920PVPU3BOI1-G920PSPT3BOI1_Original, G920PVPU2BOF7_G920PSPT2BOF7_SPR and ran them per some tutorials, but that didn't help.
Again, I'm new and don't know if those files are even right. (ignorance is bliss I suppose - unless you want to accomplish something)
I'm hoping someone can spoon feed me the knowledge here based on your experiences.
What files should I be downloading (links(?)) and do you have any tip/tricks on resolution?
I appreciate any help here as I've had to downgrade to a Moto Photon from 2011 and it's absolutely excruciating to use.
Thanks yall!
Click to expand...
Click to collapse
Sounds to me like you might have an unfixable problem. Is the water damage noticeable, that Sprint won't touch? If not, take it to another and don't volunteer that information. If they are able to detect water damage and won't touch, you are kind of SOL. Make an insurance claim if you have it or try Samsung.
This is where to get the latest firmware for your device. The download is very slow. Some guys on here have uploaded for a faster DL. Look around or just wait on one of these.
Flash one of these with odin, if it doesn't work, you likely will have to replace.
todivefor said:
Sounds to me like you might have an unfixable problem. Is the water damage noticeable, that Sprint won't touch? If not, take it to another and don't volunteer that information. If they are able to detect water damage and won't touch, you are kind of SOL. Make an insurance claim if you have it or try Samsung.
is where to get the latest firmware for your device. The download is very slow. Some guys on here have uploaded for a faster DL. Look around or just wait on one of these.
Flash one of these with odin, if it doesn't work, you likely will have to replace.
Click to expand...
Click to collapse
Thanks todivefor! I'll give that a shot and if unsuccessful follow up with Samsung next. Appreciate the reply.
Faster Download
https://www.androidfilehost.com/user/?w=settings-dev-files&flid=40967
The two latest TAR files for Odin.
I would use OJ7 as it is newer and if you have taken an update, you would need that one. (You can always use a later TAR, but not revert back to an earlier.)
Use an MD5 checker (like this one for Windows: http://www.winmd5.com/) to make sure that your download is complete. Every file has an MD5, check that it matches what appears on the Android File Host page.
Best of luck.
koop1955 said:
https://www.androidfilehost.com/user/?w=settings-dev-files&flid=40967
The two latest TAR files for Odin.
I would use OJ7 as it is newer and if you have taken an update, you would need that one. (You can always use a later TAR, but not revert back to an earlier.)
Use an MD5 checker (like this one for Windows: http://www.winmd5.com/) to make sure that your download is complete. Every file has an MD5, check that it matches what appears on the Android File Host page.
Best of luck.
Click to expand...
Click to collapse
thanks for thelink nu it takes me to the loge in page. im trying to download latest but as said, sammobile is way to slow.
bighleo114312 said:
thanks for thelink nu it takes me to the loge in page. im trying to download latest but as said, sammobile is way to slow.
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24269982087002159
Didn't know where to post this exactly, to be honest. This will be a long post
I was flashing AOSP roms in the phone. Tried to go back to One UI for the VoLTE thing
In one of the AOSP roms I couldn't install it in Lineage Recovery (older version of the rom thing). I saw i one post that doing an ADB Sideload in TWRP could solve the flashing problem. Did that. No issues
Wanted to test another AOSP rom but didn't boot (bootloop), so then I tried to go back to One UI. Don't remember if I did a format data in that moment.
After installing the rom and reboot to system, the phone doesn't even show the splash screen.
But tried to go to download mode and it went there, so the phone is still alive
Tried also going to recovery and it boots there (just to recovery and download mode)
I tried everything I could:
Flashed another custom ROM without success
Flashed other AOSP roms again
Changed the recovery (Lineage, TWRP and Stock tested)
Flashed the stock firmware through Odin several times
Tried to do a re-partition in Odin
Did several factory resets
Nothing seems to work. The weird thing is that, with any rom that I try to install, it tells that is installed, but when I go to the file manager in TWRP, it doesn't install anything. The free space before the installation is the same as after it. I don't know what else I can do. I just have the hope because the phone starts in BL and recovery
Anyone have any idea of what can I do to solve this? Or if there is a way to install the OS outside Odin or recovery (or ADB)
Tried with fastboot (Lineage Recovery) with several commands, and I think I found the issue. The system partition got corrupted. Need to know how to repair it (tried already with the repair option in TWRP)
Any help with this?
https://forum.xda-developers.com/t/...sh-stock-firmware-in-samsung-devices.4452839/
Read it carefully ( retrieve the original PIT file part)
Let me test it and will give feedback
lngl said:
https://forum.xda-developers.com/t/...sh-stock-firmware-in-samsung-devices.4452839/
Read it carefully ( retrieve the original PIT file part)
Click to expand...
Click to collapse
Didn't work out. Same issue
It's so stressful because it boots to the other things, but not to the system
Good afternoon faithful and unfaithful
Unfaithful Redspikejr
The barbarian from Pakonan has no idea about this but in your case he would do the following since I have had your problems and it was resolved positively.
I'm going to try to help you, I don't know English and I use a translator, I hope it's good to understand each other. Luck
First option
1 I want you to put through odin in AP twrp-3.6.0_9-2-d2s_official_jan22.tar unchecking auto reboot
2 in twrp delete data and say YES restart in twrp again and try to install PixelExperience_d2s-12.1-20220522-1749-OFFICIAL. I understand you will have it on the SD, if not, put the ROM on a USB key and try to install it in TWRP.
If you manage to install it, then install magisk apk and restart the system.
3 once started install magisk apk and ready.
Second option
1 I want you to put through odin in AP twrp-3.6.0_9-2-d2s_official_jan22.tar unchecking auto reboot
2 in twrp delete data and say YES reboot in twrp again and install the Recovery lineage.img and reboot in Recovery lineage and Factory reset & reset system partitions
3 Install the PixelExperience_d2s-12.1-20220522-1749-OFFICIAL. I understand you will have it on the SD, if not, put the ROM on a USB key and install from there. turn off the phone and
4 in download mode odin AP twrp-3.6.0_9-2-d2s_official_jan22.tar unchecking auto reboot reboot into TWRP
5 Install Magisk apk and reboot system.
once started install magisk apk and ready.
remember to have the cable plugged in to enter TWRP and download while you are following the steps. Good luck, you will say.
Salu2 of your most faithful infidel Pako
To update the situation
The battery of the phone in inflated like a balloon. I don't know for sure if that was caused by something physical, but will update when have some news
i still have the same problem and still hunger for a solution because i just bought it .. Been running quite a few firmwares now. and bootloaders and kernels and recoverys so far... but whats funny is in pixel recovery it said i had a "d2x" model which is SM-N976 model with 5G... But every elsewhere it says d2s which is note10+. Odin also says SM-N975F model... But anyways... I really really hope someone finds a solution. Because im stuck as hell...
I also made a thread my self
Partly bricked... SM-N975F
Hey guys.. Ive been a visitor in XDA forums for quite a while... And i been running root and custom FW with more or less every samsung from S2 and up... But i just got my self a note10+ (atleast thats what ive been told) and i wanted to root it...
forum.xda-developers.com
And i think its VBMETA problem. BUT i dont have any experience on that term...
Crossing fingers still...
I might have found a solution
Holy Hell, Im am so glad im not the only one that this is happened to. I will be more happy when we find a solution. I have put myself (device) in some questionable states but this has been a first and strange one for me . Its like being so close to booting into system then nothing.
AmercianPM said:
Holy Hell, Im am so glad im not the only one that this is happened to. I will be more happy when we find a solution. I have put myself (device) in some questionable states but this has been a first and strange one for me . Its like being so close to booting into system then nothing.
Click to expand...
Click to collapse
Android Verified Boot 2.0
I found this link this morning. Im sure this is the culprit.
I experienced today something like you. It did not let me flash even stock firmware. But I succeeded to get out. I flased via ODIN BL slot from Dr.Ketan and in AP slot TWRP and nothing else. And I managed to enter the TWRP recovery and from there I restored previous backup.
I will try to do a multipost due to more threads and problems which are the same...
But this is the solution...
In my folder on the picture you will see 2 files i marked with green color...
Use the file and burn it according to your current setup. Odin or custom recovery.
And the problem will be solved. Used 14 days and countless of hours to get out of this boot loop!
So im finally happy to see the boot up screen without pressing into download mode or recovery mode...
The folder on the picture is to be found on this forum... Just cant remember from which thread exackly
GL
Titanity said:
View attachment 5656047
I will try to do a multipost due to more threads and problems which are the same...
But this is the solution...
In my folder on the picture you will see 2 files i marked with green color...
Use the file and burn it according to your current setup. Odin or custom recovery.
And the problem will be solved. Used 14 days and countless of hours to get out of this boot loop!
So im finally happy to see the boot up screen without pressing into download mode or recovery mode...
The folder on the picture is to be found on this forum... Just cant remember from which thread exackly
GL
Click to expand...
Click to collapse
Bless you. My poor phone was down since 6-20. I was just kicking myself in the ass the other day saying if I got my phone to boot again i would never flash **** it on it ever again... @Titanity thank you so much for making me look like a liar. Now lets see what else we can do lol.
So you got it to work? And whats up next?
Titanity said:
So you got it to work? And whats up next?
Click to expand...
Click to collapse
Yes it did. I have gotten myself in some pretty bleak spots in the past and have been able to resolve all my issues on my own research, troubleshooting, trial and error etc. but I had never had a device that was actually able to power on, flash twrp, stockfirmware pass in odin, tried all type of pit file patches, adb and fastboot commands and still not be able to get into OS completely stumped me and I had exhausted so much time on it that i came to the conclusion that one of the talented members of XDA would for sure come up with a solution and I was right.
Sorry for the blabber, Ive been just a watcher of this site for many years and have never had to engage so my apologies for my forum etiquette.
I main focus now is to find a good rom to run with nethunter. I was running Dr. ketan Rom with nethunter while installing every LSposed Module that sounded cool and was beyond impressed by how stable my device still performed (one of my largest TWRP backups was 49Gb btw.) So yea, look for something with a strong kernal, light rom to see what I like. I have yet to try the new roms out due to unfamiliar processes of installing outside of Odin. Its been a while since I had some free time tinker in this space again.
Yea im just a watcher my self... it took me a few days until i decided to make this solution. Because i do think it was a important solution i found. But yes im just a watcher my self...
Now im stuck again though because i have a faulty usb-c, so its claming theres water inthe entrance which there isnt. And i been looking all over the forums for a solution like 3 times now. And people are just trying to trick the fault or acturally have a solution... But thats only IF they have water inside and the stupid alarm goes off...
Instead i need a solution to disable it now that its rooted. So need to know exackly what to look for and theres no help to get here. So kinda stuck... Irritating because i just wanna use it for dex... And not dex wiesless because its lagging on the mouse and what not... So my adapter need the recharge entrance and ... doh! Long journey so far... And its far from ended...
But im very happy it worked out for you... Keep in touch if you need another silly question. Then i might have silly questions for you aswell Good day my friend
@Titanity Bless your heart, I need your help . I broke my friends phone which is a note 10 plus, and all that you guys mentioned about trying everything I did as well.. I read your solution but I dont know where to find the files you marked and how to go about them exactly... the phone is currently on stock recovery and is stuck there.
Okay do you have a option to use a mic and the software discord? i do belive its easier for both of us if we can do this with direct communication. If you dont want to use / have a mic. Then its also fine. Discord got a chat aswell so dont be shy I have my own discord which is:
Join the thetitanity @ twitch.tv Discord Server!
Check out the thetitanity @ twitch.tv community on Discord - hang outwith 17 other members and enjoy free voice and text chat.
discord.gg
Ill pop op now and then, but im not a streamer anymore on twitch. So dont be mistaken by the server info...
Look forward to see you on there. And ill make sure to have the files ready for you
Until then haha
EDIT: I just uploaded a package filled with "i help you in case of emergency" files. Make sure to download it before entering discord. Get it at...
https://easyupload.io/xwlk0w - and the PW is: titanity (30 days avalible)
Also have info ready like: is the model a 975F or? what firmware is on it at the moment. Is the bootloader unlocked. But also things like do you ever used TWRP before and know how to use it etc?
Its a package filled with files of my choice, but made by people from the forum. So no credit goes to me but them...
Have in mind that all the time i been on the forum i always just read the forum and downloaded when needed, so its the first time im trying to help others... But im optimistic!
Titanity said:
Okay do you have a option to use a mic and the software discord? i do belive its easier for both of us if we can do this with direct communication. If you dont want to use / have a mic. Then its also fine. Discord got a chat aswell so dont be shy I have my own discord which is:
Join the thetitanity @ twitch.tv Discord Server!
Check out the thetitanity @ twitch.tv community on Discord - hang outwith 17 other members and enjoy free voice and text chat.
discord.gg
Ill pop op now and then, but im not a streamer anymore on twitch. So dont be mistaken by the server info...
Look forward to see you on there. And ill make sure to have the files ready for you
Until then haha
EDIT: I just uploaded a package filled with "i help you in case of emergency" files. Make sure to download it before entering discord. Get it at...
https://easyupload.io/xwlk0w - and the PW is: titanity (30 days avalible)
Also have info ready like: is the model a 975F or? what firmware is on it at the moment. Is the bootloader unlocked. But also things like do you ever used TWRP before and know how to use it etc?
Its a package filled with files of my choice, but made by people from the forum. So no credit goes to me but them...
Have in mind that all the time i been on the forum i always just read the forum and downloaded when needed, so its the first time im trying to help others... But im optimistic!
Click to expand...
Click to collapse
@Titanity bro that's so generous of you, alright.. downloading and will join discord then , Thanks dude