Appreciate anyones help beforehand.
I have a T889 rooted and now with Vanilla Rootbox. Everything is working fine.
Coming from Jedi-X I was able to flash the Perseus Kernel with no issue. I liked the fact it supported the exfat 64gb card which is the ultimate goal of this post.
After installing Vanilla Rootbox I went back to recovery and tried the perseus kernel and it started up and went to a black screen after the Samsung Galaxy Screen. Searching through the forums I have not gathered that the kernel and rom are incompatible. I took the perseus kernel from the tmobile development listing.
Thanks again for any assistance.
momo2703 said:
Appreciate anyones help beforehand.
I have a T889 rooted and now with Vanilla Rootbox. Everything is working fine.
Coming from Jedi-X I was able to flash the Perseus Kernel with no issue. I liked the fact it supported the exfat 64gb card which is the ultimate goal of this post.
After installing Vanilla Rootbox I went back to recovery and tried the perseus kernel and it started up and went to a black screen after the Samsung Galaxy Screen. Searching through the forums I have not gathered that the kernel and rom are incompatible. I took the perseus kernel from the tmobile development listing.
Thanks again for any assistance.
Click to expand...
Click to collapse
they are incompatible..perseus is a TW kernel...vanilla rootbox is AOSP...without knowing any further information, the fact that it supports exfat tells you that its not for AOSP...thus far, no AOSP kernel supports exfat
try SOAP kernel...ive been using it ever since i switched to AOSP...used to use the perseus kernel when i was on TW
Related
AOKP has become my new favorite custom ROM to flash. i have it on my Nexus 7, and when i used to own the ASUS TF101 and Galaxy Nexus, both had it as well.
i'm looking into flashing AOKP to my Galaxy S3 now, but i'm a little confused what's the difference between these:
[ROM] AOKP(Jellybean)Task & Ktoonsez (10/5) (AT&T/Rogers)
[KERNEL][AT&T][AOSP/Touchwiz][JELLYBEAN & ICS][10/3/2012] KT747 - LG8 - KTweaker (i thought custom ROMs already come with a custom kernal?)
How to flash AOKP custom ROM on the AT&T Galaxy S3 SGH-I747
[ROM][JB] Unofficial AOKP D2ATT (obviously unofficial, but is there a difference?)
and AOKP JB Build 4
in the past, i've just looked for my device on the official AOKP website, but the d2att device isn't available on any of the 4 JB builds.
so yea, any advice on which one is the most current and stable version i should use? or should i wait for it to possibly be added to build 5?
and an unrelated question... is it possible to change the default location/folder when performing a nandroid backup? i would like it to get saved to my micro SD card instead.
I've been using task and ktoonzes aokp since, well since it was ICS lol. I can't really compare it to any other ROM as I haven't seen a need to flash anything else. Ktoonzes kernel adds more functionality over the "stock" kernel that comes with it including over clock and under volt not to mention his own app to control the kernel settings and a widget to keep an eye on it.
thank you for the information.
i just noticed that the [ROM][JB] Unofficial AOKP D2ATT thread has some thanks to task and Ktoonsez for contributions.
and the Android Authority article links to a Ktoonsez download link.
i guess i should just go to the source of all these and flash the [ROM] AOKP(Jellybean)Task & Ktoonsez (10/5) (AT&T/Rogers) one?
All you need is tasks rom
No brainer
Sent from my SGH-I747 using xda premium
You don't want this one. http://rootzwiki.com/topic/34159-romjb-unofficial-aokp-d2att/ . Its some guy that has no clue what he's doing.
This is the most updated and it gets kept updated.
http://forum.xda-developers.com/showthread.php?t=1766684
lol. thanks for the info task! :good:
i went from ktoonsez ROM to liquidsmooth ROM today and now i want to go back to ktoonsez. While I was on liquidsmooth I installed the most recent ktoonsez kernel...when I restore my ktoonsez ROM do I also have to reflash my ktoonsez kernel, or will it stay from the liquid smooth flash?
does the situation change depending on whether i factory reset or not?
zetsui said:
i went from ktoonsez ROM to liquidsmooth ROM today and now i want to go back to ktoonsez. While I was on liquidsmooth I installed the most recent ktoonsez kernel...when I restore my ktoonsez ROM do I also have to reflash my ktoonsez kernel, or will it stay from the liquid smooth flash?
does the situation change depending on whether i factory reset or not?
Click to expand...
Click to collapse
When you switch ROMs, it is always advised to do a clean wipe. I believe that will clear your kernel as well, so you should reflash it. This is the best way to ensure smooth performance with minimal complications.
Galaxy S3 AOKP 4.1.2 JB 11/12/12 Build
Task650 Underwear kernel. (Conservative/Noop)
zetsui said:
i went from ktoonsez ROM to liquidsmooth ROM today and now i want to go back to ktoonsez. While I was on liquidsmooth I installed the most recent ktoonsez kernel...when I restore my ktoonsez ROM do I also have to reflash my ktoonsez kernel, or will it stay from the liquid smooth flash?
does the situation change depending on whether i factory reset or not?
Click to expand...
Click to collapse
ktoonsez rom? am i missing something here? link me to that rom please. are you talking about a kernel?
task650 said:
ktoonsez rom? am i missing something here? link me to that rom please. are you talking about a kernel?
Click to expand...
Click to collapse
No...He doesn't know what he's talking about! Your ROM & his kernel.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
zetsui said:
i went from ktoonsez ROM to liquidsmooth ROM today and now i want to go back to ktoonsez. While I was on liquidsmooth I installed the most recent ktoonsez kernel...when I restore my ktoonsez ROM do I also have to reflash my ktoonsez kernel, or will it stay from the liquid smooth flash?
does the situation change depending on whether i factory reset or not?
Click to expand...
Click to collapse
Most ROMs come with a kernel, flashing another kernel on top of it is not advised unless you want a certain kernel.
AT&T SGS3 Marble White
Task & Ktoonsez AoKP ROM
Ktoonsez 11/13 Kernel OC'ed
Medical MJ Supporter
When flashing ROM's it will always be replaced. Each ROM has a boot.img, and that is where the kernel is stored (to my brief dev'ing knowledge). So reflash the proper kernel version appropriate for liquidsmooth and you'll be good to go. You should also back up your kernel tweaks via KTweaker so that you can just do a quick restore if you've done a lot of undervolting like a lot of us. Makes flashing ROM's a breeze.
Shaddy-Z. said:
When flashing ROM's it will always be replaced. Each ROM has a boot.img, and that is where the kernel is stored (to my brief dev'ing knowledge). So reflash the proper kernel version appropriate for liquidsmooth and you'll be good to go. You should also back up your kernel tweaks via KTweaker so that you can just do a quick restore if you've done a lot of undervolting like a lot of us. Makes flashing ROM's a breeze.
Click to expand...
Click to collapse
I do back them up and this is the answer I was looking for thanks Shaddy-z
Ive been searching XDA for the TW 4.1.2 ktoonsez kernel, but I cant find it. can anyone link to a working download for the T-mobile S3? Thanks
LuigiBull has a massive thread with every version of that kernel. Including the one you are after. But my advice is to avoid the TW version. It's not good, stock is much better.
Thanks. I know I've seen that thread somewhere but I couldn't find it. I'm running goosh Rom and it's great but I wanted to try the ktoonz kernel since I've heard so much about it. Is there another TW kernel for 4.1.2 that would be good, or are all TW kernels not that great?
itsLYNDZ said:
Thanks. I know I've seen that thread somewhere but I couldn't find it. I'm running goosh Rom and it's great but I wanted to try the ktoonz kernel since I've heard so much about it. Is there another TW kernel for 4.1.2 that would be good, or are all TW kernels not that great?
Click to expand...
Click to collapse
faux has one. I tried it and wasn't impressed. I keep going back to the stock MD5 kernel. I've heard the AT&T MG2 kernel is good, but I've never used it.
Just curious what other users are running? 4.1.2? Updated to 4.3? Any interesting ROMS/Kernels?
Right now, I'm running:
StockMOD Custom ROM Touchwiz 4.3
I'm planning on trying out decimalman's kernel playground, after a failed attempt to run KT747. From what I can tell KT747 doesn't seem 100% compatible with TW4.3 (I can't vouch for any other ROMS, though). Has anyone else had success with a TW4.3 ROM and KT747?
Anyways, what are you running? I'd be interested if anyone has found some good stuff for TW4.3.
KT747 and S3rx was my daily ROM but now I use KT747 on DocHolliday's 4.4 sprint leak.
Sent from my SGH-T999 using Tapatalk
I had SlimKat with KT747 until last week. Now I have C-Rom (4.4.2) with KT747.
Such a survey to see what users have is fine. Let's just not make it into "What's the best Rom ?" thread.
I'm running SlimKat 4.4.2 build 5 stable with the latest BMS kernel.
CyanogenMod 11 (latest nightly) with the latest KT kernel.
Perseus71 said:
Let's just not make it into "What's the best Rom ?" thread.
Click to expand...
Click to collapse
Is hope not to. Very sorry if that happens, though.
Sent from my SGH-T999 using XDA Free mobile app
tokenpoke said:
The s3 is the only device I've ever had where the perks of stock based ROMs outweighed all AOSP advantages.
Click to expand...
Click to collapse
True, I stay on TouchWiz mostly for the Wi-Fi calling. I think the best feature is seriously the Samsung keyboard with the row of numbers up top (I think that's extracted from the Notes).
tokenpoke said:
4.4 ROM does not have quad view
Click to expand...
Click to collapse
I've hardly used multi, never tried quad though.
Sent from my SGH-T999 using XDA Free mobile app
Right now using a heavily debloated and customized (by me) Dandroid ROM (Android 4.1.2) with DKP kernel running Intelliactive+SIOPlus along with Greenify and the most recent V4A audio mod (plus NC2 Bootloader). Not sticking with the 4.3 TW battery hog.
Nice Discussion, but let's please keep this on Track. If you have a question, please open a new thread. The intent of this thread is to find out what the users have on their phone. Not necessarily discuss merits or why/why not of their decisions.
So Let's not go Off Track please.
Recovery--> Multiboot v2.1
ROM--> (primary boot) Mokee Rom 4.4.2 Kitkat | (secondary boot) Ubuntu Touch
Kernel--> BMS 3.4y- CPU Gov- Smartmax | I/O Scheduler- Fiops
Runtime--> Dalvik (default) | ART
Theme Engine--> CM Theme Engine
Sound Enhancer--> DSP Manager | CM11s Audio FX (Acoustic with 27% bass, no sound effects)
Keyboard--> Touchpal X (default) | Google Keyboard | Swype
ROM Tweaker--> ROM Toolbox Lite (default) | Andromizer | All-In-One Toolbox
Battery Monitor--> DU Battery Saver
File Manager--> ES File Explorer (default) | File Expert| CM File Manager
As Perseus previously asked, please stay on topic here... Thread cleaned...
alzeera said:
yo anthonol u said u gotz multiboot recovery. but how is that better than TWRP or CWM?
and how long do your battery last?
Click to expand...
Click to collapse
Yeah! It's TWRP with Multiboot feature actually, see here
It's better than CWM for me because it flashes all the ROMs I know of that CWM can flash and it has a more user friendly UI with the fact that it can boot 2 ROMs alternately....
In terms of battery life, I average about 41/2hrs on screen time with data or wifi on and about 6hrs with wifi or data off... With minimal use battery will last for about 12 to 14hrs and when I use DU Battery Saver power saving settings with minimal use it's about 16-17hrs.... Battery life varies a lot depending on usage, how bright the screen is and how much apps are syncing and believe me, I have a lot of apps syncing....
Guys, please note, the purpose of this thread is specifically to JUST list what you have got on your Device and that's it.
It is not the purpose of this thread to discuss WHY YOU HAVE SOMETHING THERE.
jake2034 said:
Just curious what other users are running? 4.1.2? Updated to 4.3? Any interesting ROMS/Kernels?
Right now, I'm running:
StockMOD Custom ROM Touchwiz 4.3
I'm planning on trying out decimalman's kernel playground, after a failed attempt to run KT747. From what I can tell KT747 doesn't seem 100% compatible with TW4.3 (I can't vouch for any other ROMS, though). Has anyone else had success with a TW4.3 ROM and KT747?
Anyways, what are you running? I'd be interested if anyone has found some good stuff for TW4.3.
Click to expand...
Click to collapse
Running CM11
Perseus71 said:
I had SlimKat with KT747 until last week. Now I have C-Rom (4.4.2) with KT747.
Such a survey to see what users have is fine. Let's just not make it into "What's the best Rom ?" thread.
Click to expand...
Click to collapse
That's true Perseus71
Upto yesterday I was on doc's Sprint_port2.1 and today I came back to my favorite C Rom with KT747
I am using k twiker, Rom manager, es file explorer, SwiftKey etc
I am on t999's latest bootloader and modem
Sent from my SGH-T999 using Tapatalk
Very happy with beanstalk 4.4.2 on my S3
stock kernel
TWRP 2.7
My wife is running slimkat on her S3
stock kernel
Clockwork mod touch
I try everything.Like most of them.Usually running Slimrom. For me it is excellent.
I'm running the NC2 version of root66. I'm going to flash Dandroid 5.2 shortly and install TWRP 2.7.1.0.
I've tried out many roms for my Sprint Galaxy S3 or better yet known as the (d2spr or d2lte series)
And i've made my choice of [trying] to get a Rom with
Stock Firmware with 4.4.2 or 4.4.4 - ND8 Bootloader - Rooted - Great Battery Life - Best Performance or Speed - No issues or Small amount of bugs - but that's just as fast as the LiquidSmooth Rom or Resurrection Remix Rom.
I've also tried a variety of kernels and most of them don't work or give me bootloops or just plainly don't have that "extra" boost i'm looking for like these roms listed.
Do you think you guys can help recommend me some roms or kernel combinations or configurations so i can get this type of rom i'm looking for?
I'm sorta n00b but i do have a great amount of knowledge to at least test it and set some settings but i would still need a tutorial or guide to do that, so anyways......
And or is their a possible Galaxy S5 Port for this GS3 ?
i've seen a few with the i900 or i9305 but i mean this has more ram and speed so why not port it?
also i've been thinking why doesnt a unified gs3 with i9305 rom work with this d2lte even tho its made for it, it doesnt makes some sense to me except that it has a different firmware or bootloader or service brand.....
Well, Thank you for reading this, please let me know, i'm trying to get the best experience i can with this phone and see what it can really do.
~-What i've Done-~
-About to Try-
HyperDrive
-Roms I've Already Tried-
(giving all credit to all you guys with these listed roms as well as for support for the phone, Great Job!)
Liquid Smooth, Resurrection Remix, C-Rom, CyanogenMod, MIUI, BrokenOS, Spirit Rom.
Oh i forgot to mention this is most of the information ive gotten with the kernels, it may not be accurate but at least you know.
--Spirit Rom v1.5 Official--
Kernels:
Quantum doesnt boot with the phone
Zeus
KToonses KT747 AOSP wifi doesnt work.
DKP
Deathly Kernels
BMS works everythings fine.
--Liquid Smooth official 3.1--
Kernels:
--Liquid Smooth BETA 3.2--
Kernels:
--C-Rom--
Kernels: