Hey guys, I'm normally silent in these forums 'cause I've never had a brick, just by reading correctly. This problem I'm having isn't a flashing brick! What happened is the following:
I know that the DHD in combi with my BT car radio is somewhat difficult (because of bad HTC coding). It seems that when I have my facebook friends in my contacts that the DHD starts slowing down and eventually hang when connected to the radio, because my radio tries to get every contact including it's info. Normally I do not sync my FB contacts with my DHD however I must have mistakingly done this.
Today I connected to my car radio and after getting out of the car my DHD showed that it was still connected (a sign that my DHD had the hang problem again). I turned of BT (took a hell of a time) and contiued on. When I came back I tried connecting the DHD again, however when I pushed the BT checkmark in settings it showed BT on, but no BT connection came up. So I went into BT settings only to find that BT wasn't turned on, then in the BT settings I checked turn BT on.
At that moment my DHD hang instantly, no inputs were registered at all. I waited a few minutes but nothing changed (I could still see the screen frozen at turning on BT). So I took out the battery and reinserted it, but when a pushed the power, the phone vibrated thrice and then did not boot, but only showed a flashing amber led.
I have rooted, S-offed and did the whole shebang to flash my DHD once. This was a long time ago and I haven't had any problems, all was OK. So at first I tried to search the forums, what might have happened. No post seems to be the same as my problem, because everyone is having these problems after an incorrect flash (my flash was correct, cause I've been using the ROM for more than 4 months!). Still I tried the solutions given in these posts (enter fastboot and flash again).
But it seems my DHD won't go into fastboot. When I hold VOLdown&power my DHD vibrates 5 times and shows a steady green led. So I thought maybe flashing a new ROM resolves the problem. If I cycle the battery and then connect is to my computer, my DHD goes into Clockwork recovery. From there I flased a new ROM to my DHD (update.zip method), but to no avail. I've factoryresetted, cleared al data, wiped battery stats, all to no avail...
As of this moment I'm at the end of my knowledge, I've done everything I know could have helped, but nothing did. Therefore I'm asking you, the Oracle of XDA (users), please does anyone have any clue what happened to my DHD and if so, how do I resolve the problem!
Thanks in advance for every little motivation/obligation you show be giving me your insights!
Info:
ROM: Android Revolution HD 2.0.9
CWM Recovery: 2.5.1.3
I've allready wiped battery stats as per this topic!
Additional thoughts: Might a hardware fault be the reason? Because it happened after some problems with BT, and also because I'm still able to correctly flash new ROMS with CWM though the problem remains?
Allright, so nobody know an answer I'm guessing... I've started the replacement process with my insurance company. However I'd still would like it if someone would know what the heck I did wrong...
Have you tried flashing a new radio, as that is what controls the hardware?
All a new ROM will do is update the RIL, not the radio.
http://forum.xda-developers.com/showthread.php?t=896597
Sent from my Desire HD using Tapatalk
It does more than likely seem like a hardware fault so it cant really be solved with software changes. Although I still would have tried to flash an RUU which updates basically everything on the phone to bare stock.
Use an RUU via your pc (v2.36 or lower so you can root it again) to restore to an out of the box state.
Allright guys, thanks for your ideas! I'm however experiencing problems trying your idea's. fFashing a radio or flashing a stock rom are not possible, because I need a connection with my computer. This connection is not possible, if I start the phone normally (or with vol down) I get the amber flashing light or the green steady light. Both do not connect to my pc, I get some device "Qualcomm CDMA Technologies MSN" for which windows can't find any drivers. When I let the DHD go into QWM recovery, the RUU won't find the DHD.
So I've tried extracting the RUU rom en putting this on the SDCARD of the DHD, but when I try to install it via CWM Recovery it says that it's an invalid file...
I actually bricked mine on purpose, and the thing that happened when it got bricked was that no lights and no life at all we're visible on the phone...
Atleast you get shakes and lights, thats a good sign!
Sadly i don't know what has to be done to restore it, but maybe Jkoljo does, PM him about your problem, if you get an assistance and some solving, write back here for your solution for others to use in the future!
They hang out in the Android Revolution HD IRC Channel, thats where i would go tbh.. Live support ftw!
Edit: While reading your above statement, it seems your drivers may be faulty in windows, redownload HTC Sync from htc.com, install, reboot, and try again.
The "Qualcomm CDMA ..." notification on the PC is a sign for the Qualcomm service mode. Also the 3 vibrates and the orange light is an indicator for that. You can enter this mode by pressing vol+ and power your device.
Stupid question, but is it possible that your vol+ button is stuck or something like that?
And you said you're able to enter CWM? how? I'm asking because you said you can't enter the bootloader.
I'll do some research when i get home today.
Meanwhile Try if ADB/Fastboot sees your phone
Edit: just checked my theory of the broken vol+ button: i held down my vol + button, took my battery out, reinserted it and powered up my phone. Result: 3 vibrates and a flashing orange light.
Then i did the same, but held down vol - ( vol+ still pressed). Result: your second phenomenon: a few vibrates and the green light stays on.
So I think this proves my theory because this is exactly what you described
I suggest you to play a bit with the vol+ button. Maybe the button will work again then
Sent from my Desire HD using Tapatalk
Well, I'm gonna fire up IRC then and try get some help. It's indeed not bricked as far as I'm guessing cause I do indeed have lights and I'm able to boot into CWM!
Flussen said:
The "Qualcomm CDMA ..." notification on the PC is a sign for the Qualcomm service mode. Also the 3 vibrates and the orange light is an indicator for that. You can enter this mode by pressing vol+ and power your device.
Stupid question, but is it possible that your vol+ button is stuck or something like that?
And you said you're able to enter CWM? how? I'm asking because you said you can't enter the bootloader.
I'll do some research when i get home today.
Meanwhile Try if ADB/Fastboot sees your phone
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Right I'm guessing this is my problem! Just two days prior to resetting I started having problems with my VOL+ button (wouldn't work, only VOL- worked). So I'm guessing my hardware VOL+ button is broken and stuck to pressed...?
To answer your question about CWM: When I take out the battery so the phone is powered down, then reinsert the battery, connect the phone to the adapter or my computer (without pressing the power button), the phone boots into CWM after about 1 minute!
So after consolidating all the answers I'm guessing this is my problem: Hardware VOL+ is constantly pressed, therefore the phone boots consequently into Qualcomm service mode. Everything seems to be OK (flashing able to CWM), though just this little VOL+ problem puts my phone into an unusable brick...
The problem is that I'm not able to repair this myself (when I would try this, I'm guessing I'll break the seals therefore my insurance won't pay)... Anyone an idea how to circumvent the VOL+ button problem, without opening up my phone?
bdacier said:
Well, I'm gonna fire up IRC then and try get some help. It's indeed not bricked as far as I'm guessing cause I do indeed have lights and I'm able to boot into CWM!
Right I'm guessing this is my problem! Just two days prior to resetting I started having problems with my VOL+ button (wouldn't work, only VOL- worked). So I'm guessing my hardware VOL+ button is broken and stuck to pressed...?
To answer your question about CWM: When I take out the battery so the phone is powered down, then reinsert the battery, connect the phone to the adapter or my computer (without pressing the power button), the phone boots into CWM after about 1 minute!
So after consolidating all the answers I'm guessing this is my problem: Hardware VOL+ is constantly pressed, therefore the phone boots consequently into Qualcomm service mode. Everything seems to be OK (flashing able to CWM), though just this little VOL+ problem puts my phone into an unusable brick...
The problem is that I'm not able to repair this myself (when I would try this, I'm guessing I'll break the seals therefore my insurance won't pay)... Anyone an idea how to circumvent the VOL+ button problem, without opening up my phone?
Click to expand...
Click to collapse
Do you have needles at home? The ones you use when you repair cloth.. Try using one very carefully behind the volume +, you could also take a bit of A4 Paper, cut out some of it and make it fit between the gap of the Volume button, and try getting dirt out of there.
Allright, I've tried cleaning the VOL+ key but it still won't work. As a matter of fact I can feel a little "click" when pressing the VOL+ key, so I'm guessing the mechanical part of the key is working correctly. However when in CWM I can only use the VOL- key to switch thru the options, VOL+ is not registered by the phone. Therefore my assumption is that the there's a problem on the PCB with the VOL+ key, ergo a hardware fault... Insurance has been called and I'm up for a switch, now let's hope the insurance doesn't figure out I've rooted and installed another ROM than stock!
At least I wan't to thank all of you who've tried to help me! My ego has been saved, knowing it's indeed a hardware fault .
Cant you use adb within cwm to adb reboot bootloader?
Sent from my Desire HD using Tapatalk
bdacier said:
Allright, I've tried cleaning the VOL+ key but it still won't work. As a matter of fact I can feel a little "click" when pressing the VOL+ key, so I'm guessing the mechanical part of the key is working correctly. However when in CWM I can only use the VOL- key to switch thru the options, VOL+ is not registered by the phone. Therefore my assumption is that the there's a problem on the PCB with the VOL+ key, ergo a hardware fault... Insurance has been called and I'm up for a switch, now let's hope the insurance doesn't figure out I've rooted and installed another ROM than stock!
At least I wan't to thank all of you who've tried to help me! My ego has been saved, knowing it's indeed a hardware fault .
Click to expand...
Click to collapse
I've got the exact same problem! I don't have insurance on it though. And, im a day late for warranty.
What am i supposed to do? Any suggestions? Will htc deny my request to fix it coz it had a custom firmware?
Any help of any sort is appreciated.
I had exactly the same problem, and I'm sorry to say that I had to have it repaired. My button would also "click", but not register.
Maybe if you are buy a new power button from eBay?
Realising this is an old thread, but still:
I was just experiencing the same problem after I did a reboot to let one of my friends borrow my DHD to turn off the PIN code check on his SIM.
It started with the blinking lights (black screen), then I pulled the battery and found that my DHD was only accessible through ADB in recovery mode.
Did a couple of "ADB reboot" without any success, then tried using "ADB reboot recovery", which seemed to work (still black screen though), and then I did a "ADB reboot".
Back to normal!
hi , i had this issue too , its bcz of the moisture ur cell phone has absorb and as HTC desire HD very sensitive with its volume rocker area , the first thing that will be affected with moisture is ur volumer rocker circuit , try making it dry with a hair dryer blower or place ur phone in a rice sack for a day .
i am sure it will work .
OK.
I will put in a detailed info about what happened.
A week back, my wildfire's touchscreen started to function abnormally.
I was rooted and on Cyanogenmod 7.0.3
So, I flashed the phone with DK custom FROYO to make it look like sense so that the warranty is not void and took it to the HTC store.
They replaced the touchscreen for a flat fee (It was water damage according to them. But the phone was never used in wet conditions nor exposed to water)
But anyway, the phone was working fine when I brought it home from their store.
Then I flashed CM7.0.3 again.
And everything was working fine.
I OCed acc. to CM's settings to 652-352 Mhz.
And left the phone to charge in charger overnight.
When I woke up, the phone was off and there was just the red LED light blinking.
I tried to boot it again, but nothing works.
Pressing the power button does not do anything.
The phone still boots into recovery. At times.
I don't know what makes it boot into recovery. But at times it does, at times it doesn't. (Right now it's not booting into recovery no matter what I do)
Just the red LED keeps on blinking.
Please help.
I am not familiar with pushing commands onto the wildfire since I use a mac.
Please suggest any methods. If they involve using command line, I can use my windows PC for that. But please give a how-to of length enough for a noob ) ) to understand.
Thank you.
Pulz
EDIT :
I got to boot into recovery once. Tried to reflash CM7.0.3
It came to "Installing update" and then failed to go further.
Tried to install DK Custom Froyo 4.5
And it went to opening package and then failed to go further.
Now entering into a panic mode !
Red light blinking generally occurs when phone is hot and plugged in to wall socket. Is it so at that time ?
Unplug the charger or usb. Remove the battery and reinstall the battery. Try to boot into hboot mode (volume down + power) or fastboot mode (trackpad + power) . If your phone can boot into hboot/fastboot mode and has no restarts or power offs, then I think you can solve it.
Try to clear storage from hboot menu. Or factory reset from recovery once you enter it. If still it is not solved, try using "pc49img" method of flashing an RUU from the hboot menu. Hope it helps. Shouldn't help if there is hardware issue.
Sent from my Blade using XDA App
hye another noob here running on cm7.
actually i have the similiar problem my wildfire start rebooting over and over again but the cause is different.
this problem happen after i want to know what class my micro sd is.
what i do is i go to settings>storage>unmount sd card.
so after knowing the class were i insert back the card then the problem happens.
my phone start to crash then cm7 logo appear after that i enter my pin no so brought me back to the home screen after few seconds the logo appear again so i have 2 repeat the same steps...
this happen many times what i do is i remove the battery wait few hours then turn back on..
so help me if someone have the similiar problem and solutions.. thanks!!
Okay so here's what happened. I unlocked my device just fine, and attempted to install a ROM, didn't work, So i decide I'm going to try to install cyanogenmod. I go this (wikiDOTcyanogenmodDOTORG/w/Install_CM_for_a5 )wiki tutorial [/URL] and I attempt to flash clockworkmod recovery via this link (builderDOTunstableappsDOTCOM/#/latest/clockworkmodrecovery/a5) When i flash, it installs. But then upon booting I get the app for developement only screen, and it's stuck showing my battery charge screen, with the orange charge light. Anyways I can't boot using the power down volume combo. I'm currently waiting on the battery to die so I can reflash the stock recovery, because fastboot won't recognize the device when I plug it in, even though my computer makes the device connected tone. So should I just wait until the battery dies? Or is there something else I can do?
Any help will be appreciated, thanks
Solved
I actually solved my problem. I waited for the phone to die, powered it on normally. Then to reset the device and held the power and up button as soon as the screen went black hit down on the volume and got into my bootloader.
HI guys,
Hoping you guys can help me. I have a HTC One X I picked up 2nd hand (apparently wouldn't charge). When I received it, I cleaned out the USB port (little bit of fluff) and plugged it into the charger... no light (expected).. I left it on and shortly after, a solid red light appeared..
After a little while on charge, the phone turned itself on but stayed on the 'HTC' splash screen and went no further. I tried powering it off completely so it would charge without draining battery or slowing the charge because the phone was on.. but every-time I tried turning it off (either holding Power button for several seconds until screen went black... or holding Vol Down + Power button for 10sec as some suggested) the phone would just reboot back to the HTC logo splash screen and stay there.
Eventually I got the screen off (not sure how) and continued to charge, then it came back on again... :/
I tried to boot into the 'Bootloader' to Factory Reset etc.. but I am unable to do so. Every-time I try, the phone would just reset back to the HTC screen.. even if I kept the Vol Down + Power button held down, the phone would just loop to that HTC screen...
As I type this, the phone is sitting, plugged in, Red LED Light Solid lit but phone on (stuck on HTC screen)... just wondering if anyone has any tips ?
Is it possible to reset the phone via ADB if I can't get into the Bootloader ?
Thanks in advance..
UPDATE: Somehow I managed to boot into the Bootloader, and by the looks of it, the previous owner rooted the phone as it have CWM v5.8.4.0 installed. Wiping Cashe, data, factory reset, Dalvick cache etc.. still no change, sits on the HTC splash screen.
i did notice in the Bootloader though, it said the battery was too low to flash .. so I guess I have to leave it on charge for longer to try flash the phone again (maybe previous owner borked the ROM installation or something?)... unless is there anything else I can do? Maybe with ADB ?
Mods, can you please delete this thread.
Sorry for any inconvenience.
Hi All,
I recently upgraded 820U indian variant to Marshmallow.
But a few days later my phone turned off and wont start. Connecting a charger would just make the LED to blink. So after searching this forum, I did manage to get the HTC logo to show up, but to my horror, it went into bootloop.
Again a series of going through all the threads in this forum. Asked a few questions as well. Installed the TWRP But still couldn't get the phone running.
Finally decided to put back Lollipop. So I copied Lollipop RUU to my SDCard and restarted in HBOOT.
After a few checking, my phone went blank. Completely blank!!! Pressing Power Button, Power + Vol-, Power + Vol - and Vol+ etc wont work. adb devices wont show my device. Niether would fastboot devices show anything.
Any idea how I can get out of this irritating issue!
hitesh_hotchandani1993 said:
Hi All,
I recently upgraded 820U indian variant to Marshmallow.
But a few days later my phone turned off and wont start. Connecting a charger would just make the LED to blink. So after searching this forum, I did manage to get the HTC logo to show up, but to my horror, it went into bootloop.
Again a series of going through all the threads in this forum. Asked a few questions as well. Installed the TWRP But still couldn't get the phone running.
Finally decided to put back Lollipop. So I copied Lollipop RUU to my SDCard and restarted in HBOOT.
After a few checking, my phone went blank. Completely blank!!! Pressing Power Button, Power + Vol-, Power + Vol - and Vol+ etc wont work. adb devices wont show my device. Niether would fastboot devices show anything.
Any idea how I can get out of this irritating issue!
Click to expand...
Click to collapse
I have the same issue! My phone turned off and wont start. Connecting a charger would just make the LED to blink.
What to do....
U said that u managed to get till the logo. what did u do??? plz reply. My phones led is just blinking
:crying:
Does it identify as anything when connecting your device to a computer? Like "Qc_loader_???" or as a normal "HTC Desire 820"?