Related
i have a bell galaxy note 2, after i flashed some custom ROM, my phone stop working, i have found similar problem on the sprint form, but doesn't know how to fix, please help.
Problem #1:
After flashing a ROM, the GN2 is unable to activate the radio/modem. The following read "Unknown" in the "About Phone" menu:
Baseband, Network, Mobile Network Type, MEID, IMEI, ICCID.....etc. Basically anything to do with the mobile network.
Problem #2:
When booted up and running, PC will not recognize the phone as usual (unable to copy files to phone).
i try odin a bell stock still doesn't work, and when i boot into recovery it keep saying is a RWC rogers phone, does that have something to do with the problem? i also try kies too, still no luck.
minghaoji said:
i have a bell galaxy note 2, after i flashed some custom ROM, my phone stop working, i have found similar problem on the sprint form, but doesn't know how to fix, please help.
Problem #1:
After flashing a ROM, the GN2 is unable to activate the radio/modem. The following read "Unknown" in the "About Phone" menu:
Baseband, Network, Mobile Network Type, MEID, IMEI, ICCID.....etc. Basically anything to do with the mobile network.
Problem #2:
When booted up and running, PC will not recognize the phone as usual (unable to copy files to phone).
i try odin a bell stock still doesn't work, and when i boot into recovery it keep saying is a RWC rogers phone, does that have something to do with the problem? i also try kies too, still no luck.
Click to expand...
Click to collapse
This has nothing to do with development.
However unless you have a backup. You'll need to return your phone for a new one.
antiochasylum said:
This has nothing to do with development.
However unless you have a backup. You'll need to return your phone for a new one.
Click to expand...
Click to collapse
sorry i posted wrong place, where can i get help, i am new to this, and how do i delete this post
Make sure you odin a rom that included the radio and kernel. Preferably a return to stock type thing. If that didn't work did you back up your efs partition?
Also what did you flash exactly?
OP please read the Forum Rules on posting in the correct Section, Moved & Thank You
I had same situation as you few days ago, I messed up my Rogers note ii with flashed 7100 rom to my i317m. I lost baseband, network imei. Luckily, after I flashed root injected FACTORY Stock rom to my rogers phone, the problem had been fixed, here is the link where you can download the root injected FACTORY Stock rom for you phone. Hopefully, you will get your phone fixed
http://forum.xda-developers.com/showthread.php?t=2004650
jjzeng said:
I had same situation as you few days ago, I messed up my Rogers note ii with flashed 7100 rom to my i317m. I lost baseband, network imei. Luckily, after I flashed root injected FACTORY Stock rom to my rogers phone, the problem had been fixed, here is the link where you can download the root injected FACTORY Stock rom for you phone. Hopefully, you will get your phone fixed
http://forum.xda-developers.com/showthread.php?t=2004650
Click to expand...
Click to collapse
Yeah i flashed this one no lucks, i think my parition is messed up, wonder if anyone has a back up efs file for my phone
Aridon said:
Make sure you odin a rom that included the radio and kernel. Preferably a return to stock type thing. If that didn't work did you back up your efs partition?
Also what did you flash exactly?
Click to expand...
Click to collapse
i flashed a rogers rooted stock version rom on my phone, so now after i did recovery it just keep on shows is a RWC in the recovery mode doesn't matter which stock rom i flash, and its saying a BMC in the download more product name. so its really messed up. because i unlocked the phone from bell, so the guy at bell told me i void the warranty on it. now i don't know what i can do to fix my phone.
Pit CSC file
any idea where i can find a pit file for my bell note 2 so i can repartion it, or that's something only samsung has it
This was a big issue with the gs3 and they've come up with a solution in that thread so given the similarities I would think that would work with some tweaking for the different partitions on the note 2. Check out the gs3 forum & maybe get in touch.. they might be able to help.
Sent from my SGS3 using my finger
I'm a bit of a noob, so apologies if this is in the wrong section. I've had a very difficult time finding threads that focus on those who have (stupidly!) applied the OTA 4.3 jellybean update, and what they can do to network unlock the phone. So here goes:
Samsung Galaxy SIII
SGH-T999
Android Version 4.3
Baseband Version T999UVUEMJC
Stock build. No root.
The closest step-by-step I've come across:
Remove T-Mobile SIM. Replace with ATT SIM. Reboot phone.
*#197328640# which successfully puts me into service mode.
This brings up the following menu:
MAIN MENU
[1]UMTS
[2]CDMA
[3]LTE
[4]SIM
From there its
[1]UMTS
[1] DEBUG SCREEN
[8]PHONE CONTROL
[6]NETWORK UNLOCK
[3]PERSO SHA256 OFF ...
Now, that's as far as I can get. The guide then says to go back to [6] and there should be an option, [4] NV INITIALIZZ.
This option is not there for me. (Note: at this point the PERSO SHA256 status is indeed set to SHA256_ENABLE_FLAG [0]).
Another guide suggested BACKing to the MAIN MENU and selecting option [5] run EFS SYNC() after selecting [3]PERSO SHA256 OFF.
I have done this and the screen reads: SYNC success. please reboot.
I do so, heart aflutter... only to be met with a SIM unlock PIN code entry screen.
Unlock fail.
Other threads have suggested downgrading to 4.1.1 in order for this to work and the necessary options be made available. Most of what I have read has said that attempts to downgrade from OTA 4.3 (with big brother KNOX) will result in a hard brick.
So, if you've made it this far... Has anyone figured out how to SIM unlock this particular phone running OTA 4.3 without rooting/downgrading?
If there is a more suitable thread discussing SIII's that are running 4.3 please direct me there.
Many thanks!
You could try and flash a 4.1.1 Modem. After that, try the above process.
Note - In that process, you are required to be super patient at each step.
Perseus71 said:
You could try and flash a 4.1.1 Modem. After that, try the above process.
Note - In that process, you are required to be super patient at each step.
Click to expand...
Click to collapse
Appreciate the response.
Yes, most of what I have come across has indicated that I would need to get 4.1.1 by hook or by crook in order to network unlock the phone, having upgraded to 4.3.
I have some experience fiddling with such things, but many posts have also indicated that, with the new KNOX package in tow, backing down from 4.3 will hard brick this device. I am hoping that, with access to Service Mode, someone will discover a way to network unlock without root/flashing.
Thanks again!
Are you Rooted ? If so flashing the LJC modem from Doc's thread won't brick your device.
Perseus71 said:
Are you Rooted ? If so flashing the LJC modem from Doc's thread won't brick your device.
Click to expand...
Click to collapse
The phone is not currently rooted, no. Most rooting instructions I've seen are for 4.1.1 or 4.1.2. My guess is I'm going to have to root to unlock...
Could you direct me to instructions for rooting OTA 4.3?
Again, many thanks for taking the time to help.
etrash310 said:
The phone is not currently rooted, no. Most rooting instructions I've seen are for 4.1.1 or 4.1.2. My guess is I'm going to have to root to unlock...
Could you direct me to instructions for rooting OTA 4.3?
Again, many thanks for taking the time to help.
Click to expand...
Click to collapse
Follow these. Effectively Flash Custom Rom using ODIN then flash SuperUser Zip.
Perseus71 said:
Follow these. Effectively Flash Custom Rom using ODIN then flash SuperUser Zip.
Click to expand...
Click to collapse
Awesome. I will try this tonight.
etrash310 said:
Awesome. I will try this tonight.
Click to expand...
Click to collapse
Well, no luck. Followed all the directions I could (provided by some awesome contributors including Doc) including:
1)Rooting using the aforementioned method and installing 4.3 with SU and no KNOX. Then just flashing stock modem 4.1.1 UVDLJC, in order to reveal the [4] NV INITIALIZZ option that is not present in Servicemode on jellybean 4.3 firmware.
--- This resulted in very slowed down system with no WiFi capability and no startup or shutdown sounds. Logging into Servicemode just resulted in a blank screen that said Servicemode.
--- Ultimately had to emergency restore firmware via KIES. (Thanks to reading a post by Doc on another thread). This got me up and running again.
2) Rooting using aforementioned method. And searching for stock 4.1.1 firmware in order to downgrade...
--- This has proven to be impossible. I can not find stock 4.1.1 anywhere. All links that have turned up have either been dead hotfile.com links or corrupted .zip files.
--- Additionally, I have been informed that once you upgrade to 4.3 OTA it is IMPOSSIBLE to flash an earlier firmware using ODIN. (Is is possible using CWM perhaps?)
In the end, it appears that the jellybean 4.3 OTA update currently has the community stumped as to how to unlock the SGH-T999 for use on another network with your only option to either convince T-Mobile to give you an unlock code or ordering one online. (And I've read of too many folks getting bogus codes ordering online...)
Still having fun trying, and its very cool to see all the hard work and info that folks like Doc are compiling on here. Maybe somebody is on the way to cracking this nut!!!
etrash310 said:
In the end, it appears that the jellybean 4.3 OTA update currently has the community stumped as to how to unlock the SGH-T999 for use on another network with your only option to either convince T-Mobile to give you an unlock code or ordering one online. (And I've read of too many folks getting bogus codes ordering online...)
Click to expand...
Click to collapse
So after all that, what is your current Rom and Firmware ? Can you try Root66 of 4.2 Rom ? Doc has Re-Hosted with mirrors.
I followed cLogic's guide that you linked to above and am running 4.3 rooted w/o Knox garbage.
Ended up getting phone network unlocked at a local hole in the wall phone shoppe. Figured it was worth a couple extra bucks to have it unlocked face to face in case code didn't work rather than fish out a reputable online source on my own.
Will be curious to compare its power usage to stock 4.3. Phone is working well, although it seems I will have to play with the APN settings as I am unable to send MMS messages... hmmm. Any advice off the top of your head?
I'd given root66 a try and also gave Doc's reposts another shot, but no dice.
So the sum of my endeavors are as follows:
1) If you want to network unlock your galaxy s3 on your own, DO NOT upgrade to jellybean 4.3 OTA until you do. It does not seem anyone has figured a way to ala ServiceMode in 4.1.1 yet.
2) If you have upgraded to 4.3 OTA you can use cLogic's guide linked to above to root your phone sans Knox.
3) If you have already upgraded to 4.3 OTA and want your phone network unlocked, you will have to pay to have it factory unlocked.
4) XDA is the bomb.
UPDATE:
Looks like the MMS messages I was trying to send finally went through... it just took an inordinately long time for them to do so.. not sure why yet.
Of dubious help to the OP, who had his phone commercially unlocked, but for others reading this thread or the OP's curiosity.. the 4.3 update has caused all kinds of grief. Amongst various bugs and battery drain issues, 4.3 has changed dialer codes or shuffled menus around. I can confirm the same results as the OP up to the point where he found that the initialize NV menu missing.
To progress further, I found that I needed:
An active SIM from a different carrier, with said SIM needing to be the phone throughout. This is in contrast to the previous method that worked without a SIM in the phone during the unlock procedure. I successfully unlocked a Note 2 with 4.3 using the steps in this techbeasts.com post.
And was successful with a 4.3 S4 using a slight variation (no NV initialize menu!.. back.. key input.. 1.. back). Both phones were M (Canadian) models.
Reading between the lines of various reports in addition to first hand experience implies that there may be several different carrier specific dodges being employed here. Playing musical chairs with the missing menu items that now have different dialer codes, are now found on hidden sub menus (key input = 1) or in back up files.
The commercial unlock guys are using proprietary tools such as Samsung tool v 16.8. Which usually seem to be database based factory unlocks fetched (or calculated?) from their servers.
.
since this worked on a note2, would it work on a sgs3 t999 that is already on 4.3?
fffft said:
Of dubious help to the OP, who had his phone commercially unlocked, but for others reading this thread or the OP's curiosity.. the 4.3 update has caused all kinds of grief. Amongst various bugs and battery drain issues, 4.3 has changed dialer codes or shuffled menus around. I can confirm the same results as the OP up to the point where he found that the initialize NV menu missing.
To progress further, I found that I needed:
An active SIM from a different carrier, with said SIM needing to be the phone throughout. This is in contrast to the previous method that worked without a SIM in the phone during the unlock procedure. I successfully unlocked a Note 2 with 4.3 using the steps in this techbeasts.com post.
And was successful with a 4.3 S4 using a slight variation (no NV initialize menu!.. back.. key input.. 1.. back). Both phones were M (Canadian) models.
Reading between the lines of various reports in addition to first hand experience implies that there may be several different carrier specific dodges being employed here. Playing musical chairs with the missing menu items that now have different dialer codes, are now found on hidden sub menus (key input = 1) or in back up files.
The commercial unlock guys are using proprietary tools such as Samsung tool v 16.8. Which usually seem to be database based factory unlocks fetched (or calculated?) from their servers.
.
Click to expand...
Click to collapse
etrash310 said:
Well, no luck. Followed all the directions I could (provided by some awesome contributors including Doc) including:
1)Rooting using the aforementioned method and installing 4.3 with SU and no KNOX. Then just flashing stock modem 4.1.1 UVDLJC, in order to reveal the [4] NV INITIALIZZ option that is not present in Servicemode on jellybean 4.3 firmware.
--- This resulted in very slowed down system with no WiFi capability and no startup or shutdown sounds. Logging into Servicemode just resulted in a blank screen that said Servicemode.
--- Ultimately had to emergency restore firmware via KIES. (Thanks to reading a post by Doc on another thread). This got me up and running again.
2) Rooting using aforementioned method. And searching for stock 4.1.1 firmware in order to downgrade...
--- This has proven to be impossible. I can not find stock 4.1.1 anywhere. All links that have turned up have either been dead hotfile.com links or corrupted .zip files.
--- Additionally, I have been informed that once you upgrade to 4.3 OTA it is IMPOSSIBLE to flash an earlier firmware using ODIN. (Is is possible using CWM perhaps?)
In the end, it appears that the jellybean 4.3 OTA update currently has the community stumped as to how to unlock the SGH-T999 for use on another network with your only option to either convince T-Mobile to give you an unlock code or ordering one online. (And I've read of too many folks getting bogus codes ordering online...)
Still having fun trying, and its very cool to see all the hard work and info that folks like Doc are compiling on here. Maybe somebody is on the way to cracking this nut!!!
Click to expand...
Click to collapse
Well try this link .... http://forum.xda-developers.com/showthread.php?t=1949687
well i dont know if it will work for me because my t999 is running cyanogenmod 12.1
The phone must be running stock 4.1.1 in order to sim unlock using the free method. Once the phone is on a 4.3 or newer bootloader, sim unlocking must be done using a code specific to the phone's imei. In order to enter the unlock code, the phone must be running a stock ROM or possibly a custom ROM based on a tw kernel.
audit13 said:
The phone must be running stock 4.1.1 in order to sim unlock using the free method. Once the phone is on a 4.3 or newer bootloader, sim unlocking must be done using a code specific to the phone's imei. In order to enter the unlock code, the phone must be running a stock ROM or possibly a custom ROM based on a tw kernel.
Click to expand...
Click to collapse
So, I previously rooted my s3. It is locked to tmobile. Then I unrooted and tried to unlock it but of course after 4.3 update (LUVUBOH1 Big mistake I see! I tried to flash a different 4.3 stock baseband just to make sure I flashed stock rom but odin failed. I kept trying and even updated odin, but no dice. Any ideas??
Do you have an unlock code? If not, you'll have to buy an unlock code and enter the code while running a stock ROM.
audit13 said:
Do you have an unlock code? If not, you'll have to buy an unlock code and enter the code while running a stock ROM.
Click to expand...
Click to collapse
Yes, I did purchase an unlock code. I'm going to try a different sim. I THINK I'm running stock rom 4.3 LUVUBOH1.
When you insert a non T-Mobile sim, you're not prompted to enter a network unlock code?
Hello,
I tried to flash custom ROM, but something somewhere went terribly wrong.
I did read some guides on flashing before attempting this and did make some precutions as well.
Such as creating ROM backup with CWM and copying efs folder with Root browser.
Unfortunately I didn't succeed with the flash. Now the phone can turn on, but there is no network service, and IMEI number is missing.
I tried to go back to my original ROM, but that didn't fix the problem.
I tried to gather as much information as possible, but it seems that information on this device is a bit outdated. For example, I wanted to try to flash back to stock ROM with odin, but most links with stock ROM are down. The one that isn't down only provides .7z file instead of md5,tar file that is required by odin.
The device works, just can't connect to mobile network.
Is there something I could do?
Before flashing anything else, what baseband and bootloader is on the phone? The imei may be missing because the ROM is too new for the phone's current bootloader/modem combination.
Bootloader version is T999UVDLJA
Baseband version is UKNKOWN
I have finally found stock ROM in tar.md5 format, which is compatible with ODIN.
The t999 is the aws version of the s3 according to this: http://www.gsmarena.com/samsung_galaxy_s_iii_t999-4804.php
This forum is for the i747 and i747m (the AT&T and Rogers) version of the s3.
If the t999 is like the i747, do not flash any ROM via Odin that tries to downgrade the bootloader as this may brick the phone.
This makes just even more complicated.
When I go to settings -> About device, under model number I have SGH-I747.
When I double check this with Samsung phone info app, under model number I have SGH-I747.
In the same Samsung phone info app under PDA version I have I747UCDLK3 and under CSC version I have I747ATTDLK3
t999 only appears when I enter Download mode via volume down + home button + power button.
What does the label under the battery say about the model #?
Label under the phone is SGHT999.
Wow, this phone is weird...
I read on the forums that there is chance to restore firmware of the phone with KIES, so I tried that. At first I entered SGH-I747 model number and serial number of the phone and it failed. But after that I entered SGH-T999 model number and serial number of the phone and KIES started to update the phone.
At the moment I have android V4.3
Bootloader T999UVUENC2
Baseband T999UVUENC2
PDA version T999UVUENC2
CSC version T999MBENC2
Phone seems to be unrooted, IMEI number is visible, I can call again, but the phone's factory mode is on.
It seems that I had a SGH-T999 which somehow was tricked int thinking that it is SGH-I747.
At the moment I would just like to have a stock ROM for this phone without all the T-Mobile apps, would that be possible?
Does everything see to work?
The easiest way to root and remove apps would be to flash a custom recovery, install supersu and titanium backup. Then use titanium backup to remove the apps.
Yes, at the moment everything works.
I can call, receive sms, use wi-fi as well as mobile data.
The only problem is that phone has factory mode on Yellow text on black background. And it is heavily loaded with T-Mobile applications.
So I guess this phone is T999 then, right? How could it be that everywhere it had I747?
By custom recovery you mean custom ROM?
You need a custom recovery such as TWRP: http://forum.xda-developers.com/showthread.php?t=1809313
Download the tar version that can be flashed via Odin.
Download supersu and copy it to the phone. Flash recovery, boot directly into recovery without letting the phone boot the ROM, flash supersu, reboot. Install Titanium Backup from the Play store, remove the apps.
Thank you for sticking with me in this thread!
Could you please explain a little bit more what is TWRP? From the link provided I understand that is is a application that helps with custom rom flashing and backing up roms?
Shouldn't I do this at first - http://forum.xda-developers.com/showthread.php?t=1771687
Boot into download mode. Do you see anything about warranty bit 1? If you do, that means you have already tripped the counter.
Root is not required to flash a custom recovery.
If you are only interested in root, follow the other thread. If you want to be able to flash custom ROMs and backup the rom, you need a custom recovery which will definitely trip the counter.
Do you have any warranty left on the phone?
Yes, there is 1 next to warranty bit. What does it mean for me that I have tripped the counter?
At the moment I would just like to get rid of factory mode and remove those unwanted T-mobile APPS. I think I will be done with Flashing for quite some time
I don't have any warranty on the phone, It has been in the family for quite some time.
It would be 0 if the counter wasn't tripped.
To bring it right back to stock, you could flash one of the prerooted ROMs from the other thread. Just make sure you are flashing a rom that has the same bootloader that is currently on your phone. Hopefully, the stock rom will remove the factory mode.
I understand that the counter is only important if you need warranty, yes?
I actually just found a way how to remove the factory so that is one more thing less to worry about
And I rooted the phone with odin using the link few posts back.
Now for the final question, I understand that this rom is something along the lines that I'm looking for? http://forum.xda-developers.com/showthread.php?t=2501303
The ROM looks nice as long as you are running the correct bootloader and modem.
Installing a custom ROM only requires a custom recovery. There is no need to root or remove apps from the existing ROM since you are going to wipe the existing ROM before installing the new ROM.
I read through the thread and I understand that I have to flash T999UVUEMJC modem before flashing the ROM.
I'm not sure where the bootlaoder of this rom is mentioned. Only place where boot loader of my device T999UVUENC2 is mentioned is in change log "-Rebased to T999UVUENC2".
The official T-mobile firmware is here: http://www.sammobile.com/firmwares/database/SGH-T999/
Notice the last few letters in the firmware PDA?
Based on your post on the first page (post #7) you are on the NC2 bootloader and modem, which are compatible with the rom you are wanting to flash. (See the second line under the Disclaimer banner.) NC2 is the most current firmware for the T999 listed on the page Audit linked to.
(one explanation for how your device was reporting i747)
Is it possible that someone else flashed the i747 rom to this phone? Either someone doing you a favor or a previous owner? I747 roms will work on the T999, I frequently see people commenting on doing so successfully. You just need to have comparable bootloaders and modems. That and if the rom dev didn't accommodate the device in the updater-script the user must edit the script himself. In the unofficial cm12.1 thread for the i747 people were doing this often.
So the bootloader version is always the same as the modem version?
I understand that in my case I don't need to flash T999UVUEMJC modem, since the one I have at the moment is newer?
That is definitely possible, although, how it came to be I will never know, since I personally didn't buy the phone. But this would explain a lot.
Could you please take a look at this thread, I created steps I plan to do in order to flash the above mentioned ROM. It would really put my heart at ease http://forum.xda-developers.com/galaxy-s3-t-mobile/help/one-rom-flashes-please-double-check-t3111443
Hello! Now, I am a new member, And solely for one reason..
I AM UNABLE TO FIND A MODEM FLASH FOR 4.1.1 BASEBAND I317MVLUDNH2
Now, I have searched EVERYWHERE, and, all the Rom's are for the I317, and if it is for the I317M, I am unable to download for some odd reason.
Now, Here are the links i've searched through (Just incase I missed something)
http://forum.xda-developers.com/showthread.php?t=1987541
http://forum.xda-developers.com/showthread.php?t=2005141
http://forum.xda-developers.com/showthread.php?t=2275844
http://forum.xda-developers.com/showthread.php?t=2590452 This may be the answer.. Tho I've heard using a Flash not made for your Modem can brick your phone..
http://forum.xda-developers.com/showthread.php?t=2581321
http://forum.xda-developers.com/galaxy-note-2-att/help/sim-unlock-4-4-2-t2822603/page3
http://android.stackexchange.com/qu...317-att-samsung-galaxy-note-2-on-jelly-bean-4 (links back to first link)
So, I am basically out of ideas. All i want to do is DOWNGRADE to 4.1.1, unlock the phone through the hidden menu, Then go back to 4.4.2. (Since i got the phone from a friend, and am currently using a rogers [Well, More of a Petro-Canada] Sim...)
So, Would I be okay using that Rogers flash? With Phrilz OR TWRP?? Or how would i go about this???
FIGURED IT OUT!!!
Okay, Here is a rundown on how to do it:
1. First download TWRP https://twrp.me/Devices/
2. Download the ROGERS Modem firmware http://d-h.st/rJq
3. Download Odinhttp://androidhost.org/get/PVAIv
4. Enable USB Developer Mode
5. Put the Phone into Odin download mode (Shutdown. Hold down Power+Volume Dwn+home. When the Bootsplash shows, Let go of Power button. Press Volume Up
6. Open Odin on your computer, browse to the TWRP .img (if you haven't already unzipped it, Do so) In the PDA section
7. Hit start, Wait till it is finished
8. Now, Open the phone directory in your windows manager thats built into the OS.
9. Drag the .zip into your main phone directory ( / )
10. Shutdown the phone, Hold power+Volume Up +home. Do it until bootsplash is done. (same as step 5)
11. In TWRP, select backup, then backup the MODEM folder. (I honestly forgot this step, If you have. There is links for the original baseband.)
12. Once that is backed up, You can either upload it to your desktop (i'd recommend doing that) Then, Open install, Browse for the .zip for the MODEM, then flash.
13. The system will reboot back into TWRP, just pull the battery out, and insert it back in, boot up the phone.
14. Type in your dial: *#197328640#, UMTS, DEBUG SCREEN, PHONE CONTROL, NETWORK LOCK, Then select option 4. Reboot phone
The simcard should now work!! Now, You can either install the old firmware you backed up, or just leave it.
New firmware for 4.4.2 Incase anyone Needs it: http://www.sammobile.com/firmwares/database/SGH-I317M/
Hopefully this helps anyone. It took me 5 hours to find out all this info (because the phone is a I317M, Not the non "m" version)
THANKYOU FOR ALL THE WORK OTHERS DID FOR ANY OF THESE PROGRAMS USED!!!!
THIS DOES NOT WORK ON CUSTOM ROM!!! You must have the original Stock rom, or atleast something close with the samsung stock dialer, as the code only works on those.
Thank you for your detail instructions. Recently I got a used a SGH-I317M locked to Rogers. It has firmware 4.4.2. Will it be safe to follow your instructions to flash the 4.1.1 Rogers modem only, do unlock, and then restore to the original 4.4.2 modem with twrp?
Thanks,
Howard
howard30 said:
Thank you for your detail instructions. Recently I got a used a SGH-I317M locked to Rogers. It has firmware 4.4.2. Will it be safe to follow your instructions to flash the 4.1.1 Rogers modem only, do unlock, and then restore to the original 4.4.2 modem with twrp?
Thanks,
Howard
Click to expand...
Click to collapse
Yes that should work (So sorry for the late reply, I haven't been on this site since I made the post) Just make sure to backup before you do anything incase it does happen to screw up Just remember to select that last link (sammobile) and get the firmware FOR YOUR NEW CARRIER, not the old one.
I need to unlock my At&T note 2 but it is now running 5.1.1 Bliss Pop. I tried that code but of course it wont work.
I sent the IMEI number and paid to have it unlocked but the company I sent the money to said they could not unlock it either.
What would I have to do to this phone to unlock it. I am in Cananda this week and want to use this PetroCan sim card I paid for.
Thanks
madpb said:
I need to unlock my At&T note 2 but it is now running 5.1.1 Bliss Pop. I tried that code but of course it wont work.
I sent the IMEI number and paid to have it unlocked but the company I sent the money to said they could not unlock it either.
What would I have to do to this phone to unlock it. I am in Cananda this week and want to use this PetroCan sim card I paid for.
Thanks
Click to expand...
Click to collapse
Okay, this is quite simple, install TWRP as usual, but backup the MODEM you have right now for 5.1.1, Then follow through the instructions, and install the MODEM you backed up after. That shoould work, if not, try to find modems for the phone for 5.1.1, But usually, (if my computer knowledge is correct) a new OS shoould support and older modem, so, you can try 5.1.1 with a 4.4.2 modem.
J.Naw said:
Okay, this is quite simple, install TWRP as usual, but backup the MODEM you have right now for 5.1.1, Then follow through the instructions, and install the MODEM you backed up after. That shoould work, if not, try to find modems for the phone for 5.1.1, But usually, (if my computer knowledge is correct) a new OS shoould support and older modem, so, you can try 5.1.1 with a 4.4.2 modem.
Click to expand...
Click to collapse
I tried the rogers modem and the *#197328640# did not work.
Any other modem files you can suggest?
It appears that I have to the load original stock rom but I also read that is not possible either.
madpb said:
I tried the rogers modem and the *#197328640# did not work.
Any other modem files you can suggest?
It appears that I have to the load original stock rom but I also read that is not possible either.
Click to expand...
Click to collapse
Huh.. Thats honestly really weird, It should work. Did you check the "about" section of your phone to make sure it properly installed the 4.1.1 modem?
w w w.android.gs /flash-android-4-4-2-kitkat-i317mvludnf1-for-canadian-galaxy-note-2-i317m/
(remove the spaces.. XDA forums aren't letting me post outside links -_-)
your second link modem
it has tons of popups and when its not trying to open new windows and ask for browser access etc it downloads a "flash file" your 1.4mb download is a exe and puts up a warning.
since samsung removed the menu entery they left in by mistake on early 4.1x releases there is no way this ork to do anything but install malware and trojans from your site.
Kal Jack said:
it has tons of popups and when its not trying to open new windows and ask for browser access etc it downloads a "flash file" your 1.4mb download is a exe and puts up a warning.
since samsung removed the menu entery they left in by mistake on early 4.1x releases there is no way this ork to do anything but install malware and trojans from your site.
Click to expand...
Click to collapse
You can extract the modem from the stock 4.1.2 ROM or you can flash the entire stock ROM in Odin, unlock, and flash back to the latest stock ROM.
Hi there,
I have the Samsung Galaxy Tab S 8.4 LTE version, which I purchased through Ebay - I believe it came from Asia somewhere as it showed up with an international adapter for the power supply. It was sold as a "Verizon" model - I ditched that sim card and have been using it with Bell Mobility in Canada.
Recently, I tried to update my firmware using the latest version of Samsung Kies and I'm running Windows 10 latest version. For some reason Kies needs to reinstall the USB driver before performing the update to the firmware and this causes Windows 10 to crash without fail. (This is also happening to my Note 3 - Samsung informs me Kies is not compatible with Windows 10 although it seems to work for everything else - just not the update). Kies doesn't seem to care that I already have the latest drivers installed.
I can't update via the tablet because my device has been "modified" - rooted.
Finally I went to Sammobile for the firmware, however I can't find any US firmware for a compatible carrier under SM-T705. I am debating flashing the Bell Canada firmware, but the model is listed as SM-T705W. In case this is not ok and I need to revert to the original, I'm hoping someone can help me identify my build? The samsung agent offered to identify it but once she discovered it was from outside Canada she said she had no information. So much for Samsung International!
Please help! I'm having battery issues and I'm hoping updated firmware will help, plus I would like to have the latest version of Android. Thanks!
If you're in Canada then just flash the Canadian firmware.
ashyx said:
Cellular south is us
Region XAR
Click to expand...
Click to collapse
Hi there, forgive me for being thick, but how do you tell it's Cellular south, and what do you mean by region XAR? I'm sure that the fellow I bought this unit from flashed US firmware, however I can't find it on the Sammobile site - in fact I can't find any US carrier firmware listed for this model.
As mentioned above, I did find Bell mobility (Canada) firmware listed for the SM-T705W but nothing for the SM-T705.
Further explanation greatly appreciated!
LostinCanada said:
Hi there, forgive me for being thick, but how do you tell it's Cellular south, and what do you mean by region XAR? I'm sure that the fellow I bought this unit from flashed US firmware, however I can't find it on the Sammobile site - in fact I can't find any US carrier firmware listed for this model.
As mentioned above, I did find Bell mobility (Canada) firmware listed for the SM-T705W but nothing for the SM-T705.
Further explanation greatly appreciated!
Click to expand...
Click to collapse
You can flash any firmware for that model, so just flash the Canadian firmware, no point in flashing a us firmware.
ashyx said:
You can flash any firmware for that model, so just flash the Canadian firmware, no point in flashing a us firmware.
Click to expand...
Click to collapse
Ok great. I would like to locate the US firmware though for future use. I travel alot in the US and in the event I need a different carrier's modem... Are the US carriers listed somewhere else or am I blind? http://www.sammobile.com/firmwares/search/SM-T705/
Thanks!
LostinCanada said:
Ok great. I would like to locate the US firmware though for future use. I travel alot in the US and in the event I need a different carrier's modem... Are the US carriers listed somewhere else or am I blind? http://www.sammobile.com/firmwares/search/SM-T705/
Thanks!
Click to expand...
Click to collapse
You have root so install twrp from the development section and do a full back up of your current system.
You can then restore as you please.
Seems no US firmware for the t705.
ashyx said:
You have root so install twrp from the development section and do a full back up of your current system.
You can then restore as you please.
Seems no US firmware for the t705.
Click to expand...
Click to collapse
LOL... ok now I have another problem. I had already downloaded the Bell mobility file from Sammobile and hadn't seen this response - in the meantime I hooked up with Odin and my download failed twice - I don't get it. I just did my Note 3 10 minutes ago without any issues. Rebooted device and odin between both attempts.
Thoughts?
Don't flash anything until you make that full backup with TWRP, trust me it will save a massive headache should you need it.
Download Flashfire from the link below then set your date back to August, run Flashfire then load up the firmware, select the Flash firmware package option.
From the partitions list select system.img and boot.img only.
Under the reboot options select download mode then hit the flash button.
Once it has flashed and booted to download mode you will need to flash a lollipop bootloader (assuming you are flashing lollipop?)
You will find them in the bootloader thread.
After that just reboot the tablet, it will take about ten minutes for it to fully boot.
http://likewaphd.in/filewap-1-load/...2015/FlashFire_Pro_v0.21_-_Likewap.apk-0.html
Uh... ok you lost me early on. I downloaded the file - how do I install it? I remember using the TWRP thing several phones back when I was messing with custom ROMs. I had a problem with recovery and since then have never gone this route - I've been happy with stock rom and root - installed using Odin... sortof the KISS principle.
I can try TWRP, but could you dumb down the instructions a bit - as I mentioned, I'm a bit thick - particularly with some of the terminology! LOL
This is the file I downloaded - yes, Lollipop - I don't understand why I have the Odin Fail - google isn't helping me understand either. I have root, USB debugging is enabled and I followed the same steps as with my Note 3 - the message said write fail.
http://www.sammobile.com/firmwares/download/52301/T705WVLU2BOE4_T705WOYA2BOE4_BMC/ Is this what you mean by bootloader?
TWRP - flash with odin then boot into twrp using POWER + HOME + VOL UP - http://forum.xda-developers.com/gal...p-2-8-6-1-unofficial-sm-t800-805-807-t3074633
Bootloader - http://forum.xda-developers.com/showthread.php?t=3099362
ashyx said:
TWRP - flash with odin then boot into twrp using POWER + HOME + VOL UP - http://forum.xda-developers.com/gal...p-2-8-6-1-unofficial-sm-t800-805-807-t3074633
Bootloader - http://forum.xda-developers.com/showthread.php?t=3099362
Click to expand...
Click to collapse
Ok but those "bootloaders" are custom ROMS are they not? And I don't see my device on the TWRP site - I have the LTE version, it only shows Wifi.
Really all I want to install the Bell stock firmware (assuming it is indeed compatible - SM-T705 vs SM-T75W) I linked to from the Sammobile site and then do Chainfire's auto-root.
Why isn't Odin writing the firmware to my device? I've never had this issue before and I don't see what I might have done differently with this device - it's the first time I've tried to update it, but I had no trouble rooting it with the chainfire auto-root.
LostinCanada said:
Ok but those "bootloaders" are custom ROMS are they not? Really all I want to install the Bell stock firmware (assuming it is indeed compatible - SM-T705 vs SM-T75W) I linked to from the Sammobile site and then do Chainfire's auto-root.
Why isn't Odin writing the firmware to my device? I've never had this issue before and I don't see what I might have done differently with this device - it's the first time I've tried to update it.
Click to expand...
Click to collapse
No they are bootloaders they are required to boot the firmware , roms are the os.
Odin won't flash because certain devices will refuse to flash another regions firmware.
My advice to you is to flash the lollipop bootloader first, to make sure it will flash then flash the firmware with flashfire.
Obviously make the twrp backup first.
ashyx said:
No they are bootloaders they are required to boot the firmware , roms are the os.
Odin won't flash because certain devices will refuse to flash another regions firmware.
My advice to you is to flash the lollipop bootloader first, to make sure it will flash then flash the firmware with flashfire.
Obviously make the twrp backup first.
Click to expand...
Click to collapse
Ok I flashed the bootloader, and then I tried to flash the firmware with Odin again but it still won't do it - write fail again. I've never used flashfire - windows 10 won't open it...
UDATE: Ok I read to transfer the file to the download folder on the tablet, and then install on tablet. So I did that, but when I click on the icon it doesn't run. How the heck do I use this to install the firmware update?
Figured out the date bit, ran Flashfire.... problems during the install - got stuck in boot loop - tried a factory reset - that didn't work... stuck in loop. I think I'm bricked....
Left the default settings in place - very little in the way of instructions - read the bit about not trying to write over protected settings...
And got this:
You're not bricked as long as the tablet starts up and you can boot to Download mode.
I've seen that error with corrupt downloads so not sure why you're getting it.
Reboot to download mode. Just hold POWER + HOME + VOL DOWN until the device restarts and boots to download mode.
Doesn't matter if it's boot looping.
Reflash TWRP and restore the backup you made earlier. You will be back to where you started.
At this point I think the best option is to flash a custom lollipop rom.
There is a very good one I use on my t805 which is practically stock with a bit of bloatware removed.
Its in the development section called sweetrom.
At least one positive is that you were able to flash the lollipop bootloader, so upgrade is not impossible.
I'm definitely able to get to download mode - I was surprised that the factory recovery mode didn't work. I'm wondering if the file from sammobile is corrupted - I used the same file with Flashfire - now I think Odin was trying to save me. I'm downloading the same file again fresh, and it looks like Telus and possibly the other Canadian variants are the same - unless it's the same corrupted file.
I just hope the problem isn't because my phone identifies itself as a straight SM-T705. That is why I asked about that point earlier. There are plenty of straight 1705 options available - just don't know which country would be compatible - particularly for the modem.
I didn't understand how to use TWRP and I've had problems with it in the past (recovery) when I did figure out how to use it and was messing with custom ROMS a couple of years ago. I would really like to get myself back in order with a proper stock ROM and root. This tablet belongs in my car and right now I just want it to work properly - I'm using Torque to resolve some ongoing engine issues and it will suck if I have to go back to using the small screen on my Note 3.
If there is any way to figure out which of those countries for the 705 are compatible with Canadian carriers, in case this Bell firmware is defunct, that would be appreciated.
As well, is that bootloader going to cause any problems with stock firmware? I've already flashed it - does stock firmware come with bootloaders included?
OK before I go any further with this I need you to install twrp and make that back up. Twrp is now very stable.
Twrp will back up some very important partitions namely the Efs and modem. Don't take this warning lightly. The amount of people that have soft bricked their device because they didn't do this.
Boot into twrp then simply select the backup option and make sure the partitions on the left are ticked particularly boot,
Efs and modem.
Now as regards which firmware.
I would forget about installing the Canadian firmware.
It looks like this firmware will only install specifically on a Canadian device.
It doesn't really matter which firmware from which region you install as they are pretty much all the same except for the carrier ones which just add more bloat and some csc specific stuff.
Just go for an international rom. You've already flashed a bootloader from one of these roms so that proves you can flash.
Use odin to flash.
If you have connection issues afterwards then all you need do is restore your modem backup with TWRP.
That's why it's important you do this.
Follow these instructions and we will get you up and running.
Whole again!
Whole again!
For the record, I read elsewhere that it is NOT recommended to flash other letter variants of a model. In the meantime I downloaded all four Sammobile Canadian Carrier files and they appear to be the exact same file and all install attempts failed For anyone else with an actual SM-705W I read in this thread: http://forum.xda-developers.com/galaxy-tab-s/general/t705-lollipop-t3099945 a fellow Canadian was having a problem with those same files. Dunno what happened with him in the end, however I tried one more W file I found elsewhere that appeared to be different but it failed as well.
Based on the comments in the above thread, I flashed the Hong Kong variant for the SM-705 from Sammobile - apparently it was the first firmware widely available and users from several countries posted they had used it successfully. So far it seems to be working ok - after flashing it, I did a factory reset on the device as was also recommended in the above thread. Sure hope the battery life will be better than before - love this tablet but I've never seen a device drain so rapidly! CF-Auto Root restored!
As a side note my Ebay seller did reply to my origins query and was helpful once he realized I wasn't complaining about the device and wanting to return it... LOL. Apparently my unit originated in Singapore and arrived with that firmware along with a Verizon SIM which I never tested. As long as the OS is smooth, and the modem compatible, and unless someone advises a better country variant, I guess I'll stick with this one.
Now just need to get Torque reconfigured!