Hi to all
well, to keep this short, hox tegra on orange uk (cid orang001) so it's still s-on, unlocked the bootloader using hasoon2000's thread and tool (great piece of work btw, thank you), installed twrp, then installed android revolution JB, after wich the phone got stuck freezing during the htc logo at boot
tried to revert back to stock, freezing on boot still, one of the problems is I can't update the hboot- fastboot oem lock, fastboot flash zip etc. sends back an "failed to write, no permission" error and I'm not sure I understand how to flash a RUU from the recovery or fastboot
hboot is 1.12 still and radio is 2.1204.105.14
some advice as to where I have gone wrong is much appreciated, thank you
Do these commands in order to update the hboot:
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip firmware.zip (repeat this command until it succeeds)
Then you should be able to unlock the boot loader, flash twrp and flash the boot.img of arhd.
Sent from my IceCold One X
Thanks for helping me out, okay so on rebootRUU command the phone shows a black screen with htc in silver, that's the mode for installing RUU's am I correct and while in this mode I tried to push the hboot file but it says (remote: 12 signature verify fail), I suppose the stock recovery that I tried is not good enough, at this point I'm a bit lost in the heap of files, would you mind directing me to a recovery I could use?
Correct. It doesn't matter at all which recovery you have... the problem must be your fimware file. Did you take the right one based on your CID?
like I said I got lost in the myriad of files)) okay so I followed your thread "[INFO] Where to acquire EndeavorU RUUs" and I'm currently downloading RUU's from Android Files, there's three of'em for orang001 and I've tried installing the newest but it said that the bootloader version doesn't match, oh, and now my radio is 5.1204.162.29 can I just try running the two left RUU's and see what happens?
It must match
fastboot getvar version-main
Also, you must relock the boot loader before running a RUU (fastboot oem lock)
Sent from my IceCold One X
okay, the bootloader was relocked, problem was RUU version, mine is 2.17.61.3 and I can't find a RUU of that version anywhere, there's a nandroid backup link but it's down I've searched for a "re-upped" post but couldn't find that either. guess "today is not a good day for science"
RUU/nandroid unavailable. Firmware.zip is your only chance.
What happens if you try to flash it? It should say OKAY after 2-3 tries.
Sent from my IceCold One X
can I use this for flashing then?:
x.xx.61.x - Orange UK (United Kingdom)
cidnum: ORANG001
Download: firmware.zip with hboot 1.36
from the "[11.02.2013] Jelly Bean firmware collection for different Carriers ID (CID)" thread
Kozohana said:
can I use this for flashing then?:
x.xx.61.x - Orange UK (United Kingdom)
cidnum: ORANG001
Download: firmware.zip with hboot 1.36
from the "[11.02.2013] Jelly Bean firmware collection for different Carriers ID (CID)" thread
Click to expand...
Click to collapse
Yeah, that's the one.
Sent from my IceCold One X
Saved my life, thank you so much!
So I got it back to stock with hboot 1.36 and radio 5.1204 and also I suppose it's a JB now as opposed to Ice Cream before?
Now if I unlock it, flash twrp and nandroid bkup I should be able to flash it with ARHD 21 JB?
also might you tell me if unbranding it would mean s-off?
and just a small unrelated question, running a wifi hotspot tether on a 2.3.7 is accessible by the pc and an iphone but cannot be seen by Ice Cream and JB, why is that?
Kozohana said:
Saved my life, thank you so much!
So I got it back to stock with hboot 1.36 and radio 5.1204 and also I suppose it's a JB now as opposed to Ice Cream before?
Now if I unlock it, flash twrp and nandroid bkup I should be able to flash it with ARHD 21 JB?
also might you tell me if unbranding it would mean s-off?
and just a small unrelated question, running a wifi hotspot tether on a 2.3.7 is accessible by the pc and an iphone but cannot be seen by Ice Cream and JB, why is that?
Click to expand...
Click to collapse
Yes, you can flash arhd 21.
You'd need s-off in order to unbrand, which is not available for our hox.
Don't know about the WiFi tether thingy, maybe it works fine on arhd...
Sent from my IceCold One X
Related
Hello all,
First off so i've been Googling/Searching/Trying/Smash Head against the wall for the past 24 hours.
I've got a One X... It's a UK handset I bought direct from Handtec with no Network Image or Locking.
- Unlocked via HTCDEV with a key.
- HBOOT is 1.12
- RADIO 2.1204.135.20
- CID: HTC__001
- (null)latform-tools mac$ ./fastboot-mac getvar version-main
version-main: 2.17.401.2
- I'm running recovery-clockwork-touch-5.8.4.0-endeavoru.img in my Recovery Partition.
I've tried to flash the device with ICJ 3.5.1 (aokp_endeavoru-ICJ-V3.5.1) initially, followed all the instructions, flashed the boot.img, do a wipe, install the ROM from ZIP, flush the cache partition and restart. Not having it, it gets stuck at the ROM's flash screen "Initiating Swagger".
The story is the same for Viper 2.6.0 and finally I tried to flash the stock ROM back http://forum.xda-developers.com/showthread.php?t=1546970 and that's not working either (stuck at the HTC ONE beats audio screen).
I tried to flash back the stock recovery.img but when I launch into it I just get a picture of a handset with a red warning triangle.
So i'm pretty much out of options!
Suggestions anyone? I'm obviously missing something silly....
Regards
Matt
Do those ROMs require an updated hboot? I.e., are they JB Sense and require hboot 1.39?
BenPope said:
Do those ROMs require an updated hboot? I.e., are they JB Sense and require hboot 1.39?
Click to expand...
Click to collapse
It's really unclear... Maybe I should upgrade the HBOOT? But the question is what to? 1.28? 1.39? or.....
Not 100% sure but i guess updating the hboot will help. I reckon you should fo that.
The upgrade for your CID is hboot 1.39.
Sent from my unlocked HTC One X using XDA premium.
just a quick question,
I am trying to update my GF hox to a new jelly bean rom and I havent dont it in a while and people are mentioning upgrading the hboot.
She has hboot 0.94 so which hboot should I upgrade to?
is it just a matter of flashing the RUU specific to her phone (3 uk)?
cheers!
Andyokane said:
just a quick question,
I am trying to update my GF hox to a new jelly bean rom and I havent dont it in a while and people are mentioning upgrading the hboot.
She has hboot 0.94 so which hboot should I upgrade to?
is it just a matter of flashing the RUU specific to her phone (3 uk)?
cheers!
Click to expand...
Click to collapse
would really like a quick answer as im stuck on "HTC one X beats audio" screen
After looking here http://forum.xda-developers.com/showthread.php?t=2009525 it looks as though the jelly bean RUU for 3 UK has not yet been released.
So your best bet would be to flash an ics RUU and wait for the official jelly bean OTA update to come through on the phone. You can try a H3G UK RUU from here http://www.htcruu.com/?dir=Endeavor ,but make sure to check what your main
version is using fastboot getvar version-main to see which RUU is the one you need.
You can't update the hboot until the firmware for your CID has been released.
I hope this helps.
Dan_99 said:
After looking here http://forum.xda-developers.com/showthread.php?t=2009525 it looks as though the jelly bean RUU for 3 UK has not yet been released.
So your best bet would be to flash an ics RUU and wait for the official jelly bean OTA update to come through on the phone. You can try a H3G UK RUU from here http://www.htcruu.com/?dir=Endeavor ,but make sure to check what your main
version is using fastboot getvar version-main to see which RUU is the one you need.
You can't update the hboot until the firmware for your CID has been released.
I hope this helps.
Click to expand...
Click to collapse
hi and thanks,
My cid id H3G 001
this is the RUU i am trying to flash:
RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.29.771.11_Radio_1.1204.105.14H_release_260888_signed
It comes up with an error after about 5 mins.
what am I doing wrong?
Andyokane said:
hi and thanks,
My cid id H3G 001
this is the RUU i am trying to flash:
RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.29.771.11_Radio_1.1204.105.14H_release_260888_signed
It comes up with an error after about 5 mins.
what am I doing wrong?
Click to expand...
Click to collapse
What is the error code the RUU is giving? And if the bootloader is unlocked, try locking it and running the RUU again.
Does the fastboot getvar version-main command give you the number with .771 in it?
EDIT: Also, you need to flash a stock recovery if you don't already have one. You can get one from here http://loadbalancing.modaco.com/download.php?file=endeavoru_recovery_signed.img and rename it to recovery.img and then flash it through fastboot using fastboot flash recovery recovery.img. But this has to be done before locking the bootloader.
Dan_99 said:
What is the error code the RUU is giving? And if the bootloader is unlocked, try locking it and running the RUU again.
Does the fastboot getvar version-main command give you the number with .771 in it?
EDIT: Also, you need to flash a stock recovery if you don't already have one. You can get one from here http://loadbalancing.modaco.com/download.php?file=endeavoru_recovery_signed.img and rename it to recovery.img and then flash it through fastboot using fastboot flash recovery recovery.img. But this has to be done before locking the bootloader.
Click to expand...
Click to collapse
hi thanks! it was because it was still unlocked
now i just have to find a decent ROM that is compatible!
All custom ROMs except those that run jellybean with HTC sense will work fine.
Any jellybean that are based on aosp, aokp or cm10 will work
Sent from my HTC One X using xda app-developers app
Andyokane said:
hi thanks! it was because it was still unlocked
now i just have to find a decent ROM that is compatible!
Click to expand...
Click to collapse
No problem. Glad it all went well and glad I could help
Hi guyz. I have my HTC One X which was carrier branded to optus. i wiped and flashed a stock rom and stock recovery, which took away the optus splash screen and bloatware. I've realised that optus approved of the jellybean update but its not appearing on my phone. also do u need to lock the bootloader for ota updates? also a basic description of why and what android sdk is.
thanks in advance
Its because you have a stock ROM that's based off another region and not the actual Optus stock ROM which you need, the bloat ware and carrier logo at boot up should be present in order to receive OTAs.
What you should do is download the Optus nano droid backup in the general section and restore it to return to stock.
Sent from my HTC One X using xda app-developers app
ok thanks. im downloading the nandroid backup for htc one x jellybean optus from here http://forum.xda-developers.com/showthread.php?t=1975140
is there a way to get stock jellybean sense rom on my device? or remove the splash screen and bloatware after i flash the optus backup
thnx
Yeah... Install one. Mike1986 has a stock JB ROM.
So, after you return to stock and receive the JB update, you'll be ready to install a custom JB ROM.
ok thanks guyz. i got one more question, im getting the stock nandroid jb rom for optus, do i have to update my hboot or anything like that? befor flashing?
UPDATE
http://forum.xda-developers.com/showthread.php?t=1546970 this is a stock jb rom for one x, can i flash this instead of the jb optus nandroid backup (the hosting site is annoyingly slow). and again do i need to update hboot for this rom, if yes how. thanks
You need a stock rom from Optus and the stock recovery to be able to update the phone. Restore the Optus nandroid,flash the boot.img from the nandroid and flash back the matching stock recovey, then you can update the phone
thats good. but im asking, is it neccessary to update my hboot for the JB optus nandroid backup? and for a stock htc JB rom?
You need to restore the nandroid backup that matches the software number of the phone ! If its 2.17 you should restore the 2.17 Optus nandroid and update officially to JB, the update will take care of flashing the higher hboot to 1.36 or even 1.39. After that you have to flash a custom recovery and flash a custom rom again.
Fastboot getvar version-main
That will say which one you need.you can't just restore the JB nandroid. The hboot has to be updated for JB roms
ok thanks, but i also have the hboot for jelly bean (optus), which i got from here http://d-h.st/users/ClydeB1/?fld_id=8110#files
can i use jelly bean flasher and flash the hboot 1.36. then the JB rom?
the reason why is that i cant find a nandroid for ics optus. so im thinking of any other ways
Yes if the cid matches you can flash the firmware that will bring you to a higher hboot and flash JB roms
I see a Optus 2.17 backup here
http://forum.xda-developers.com/showthread.php?t=1975140
Does it match your cid ?
Mr Hofs said:
Yes if the cid matches you can flash the firmware that will bring you to a higher hboot and flash JB roms
I see a Optus 2.17 backup here
http://forum.xda-developers.com/showthread.php?t=1975140
Does it match your cid ?
Click to expand...
Click to collapse
thanks, but i got a little impaitent and flashed the Jb 1.35 Hboot :angel:. it worked!
so i unlocked the bootloader again and flashed CWM, i mount usb storage and it gives me "unable to open umn lunfile"
i think im gonna kill myself plzz help
tahsin511 said:
thanks, but i got a little impaitent and flashed the Jb 1.35 Hboot :angel:. it worked!
so i unlocked the bootloader again and flashed CWM, i mount usb storage and it gives me "unable to open umn lunfile"
i think im gonna kill myself plzz help
Click to expand...
Click to collapse
Rather than commit suicide, could try installing a version of clockworkmod that isn't ancient. I suggest 5.8.4.0.
No need for suicide !
http://db.tt/Krlm4dPs
Flash this ...
Ok thanks guyz i flashed and got jellybean. Loving it rite now!! Except my battery has been draining like hell!! Any suggestions. I heard that go power pro saves battery
Sent from my HTC One X using xda app-developers app
tahsin511 said:
Ok thanks guyz i flashed and got jellybean. Loving it rite now!! Except my battery has been draining like hell!! Any suggestions. I heard that go power pro saves battery
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Install better batt stats, and check what's eating your batt !
I did. It shows mostly deep sleep and awake time
Sent from my HTC One X using xda app-developers app
As i recall this right you have to check for partial wakelocks. Charge the phone full before you go to bed and leave it off the charger overnight
Update hboot optus001 manually
Hi i was wondering how you flash the hboot as mentions in the earlier post, I to need optus001 2.17 nandroid backup but cant get it unless link is changed to public.
However it seamed that your work around got u there, I have dowmloaded the hboot 1.36 optus zip & the recovery 5.8.4.0 file, I have also downloaded ARHD 18.1 + boot img.. I'm currently hrunning ARHD 9.7..
So were can i get a hboot flasher compatible with optus001 cid & is this all the stuff i will need & is there any threads that may help walk me thru the process's..
Any help would be great, I seemed to have it down packed till i went back to stock & optus updated my hboot to 1.12 after this my stock ruu wont work & i seem stuck. (Reading threads its clear that if i had restarted my phone one more time the JB update would have been there & all this stress saved)
Kind regards
Clemenator
Get your firmware.zip from the download link in this thread (by ClydeB) your cid is exactly Optus_001 ?
http://d-h.st/mBx
then put the phone in fastboot usb mode, lock the bootloader and follow this
http://forum.xda-developers.com/showthread.php?t=1957376
You have to flash the firmware.zip with the given commands in the thread.
Fastboot oem rebootRUU
fastboot flash firmware.zip
All this is done with a locked bootloader and the phone in fastboot usb mode.
After the fastboot oem rebootRUU command the phone will restart and stall in a black screen with a silver HTC logo then you perform the firmware flash. Unlock the bootloader again and flash a custom recovery, then you are ready for JB
NOTE : charge the battery before you start !!!
Mr Hofs
Mr Hofs said:
Get your firmware.zip from the download link in this thread (by ClydeB) your cid is exactly Optus_001 ?
http://d-h.st/mBx
then put the phone in fastboot usb mode, lock the bootloader and follow this
http://forum.xda-developers.com/showthread.php?t=1957376
You have to flash the firmware.zip with the given commands in the thread.
Fastboot oem rebootRUU
fastboot flash firmware.zip
All this is done with a locked bootloader and the phone in fastboot usb mode.
After the fastboot oem rebootRUU command the phone will restart and stall in a black screen with a silver HTC logo then you perform the firmware flash. Unlock the bootloader again and flash a custom recovery, then you are ready for JB
NOTE : charge the battery before you start !!!
Click to expand...
Click to collapse
Thank you so much worked perfect, is there away i can donate to u or is it better to jst donate $10 to xda ??
I have an HTC one x that i bought has been rooted, on aftermarket software. Mainver is 4.78.61.6.. i am trying to return to stock.
I cant install RUU as the RUU available is ICS and can not downgrade as mainver is too high, nor can i obtain a JB RUU as a telecom nz JB ruu does not exist.
I have tried everything and searched fourms for months.
flashing ruu / firmware.zip or rom.zip always comes back with an error, signature error or mainver error. from what i can tell this mainver does not exist anywhere in the world it is FAR too high to even upgrade to any existing JB stock software.
i tried extracting rom.zip from telecom nz ics firmware and matching the mainver to be the same is the only way to return to stock using customRUU or ruu flash tool... BUT when it updates to the 4th or 5th update (system update just bofore the JB update) it freezes on boot, and does lots of weird things suck as booting into recovery / ruu / fastboot.
i have tried flashing telnz001 nandroid backup of ICS (JB not available)
everything is returned to factory spec when i do this, relocked, stock recovery etc
its on an older version of hboot (the one included in stock telnz001)
Cant upgrade hboot.
tried misc tool to change mainver to 1.00.00.0 BUT IT DOESNT WORK.
ALL that will run on it is a aftermarket rom.
IS there any other way to change the mainver?
would a nandroid backup of JB on telnz001 work?
why would it fail or play up on upgrades OTA ( mainver is NEWER than the OTA updates )
really need to return to stock and upgrade to JB
thanks
I don't seem to recognize that main version, can you check and tell me what your bootloader says. The top 3-4 lines .....
it
Mr Hofs said:
I don't seem to recognize that main version, can you check and tell me what your bootloader says. The top 3-4 lines .....
Click to expand...
Click to collapse
It says
***Unlocked***
ENDEAVORU PVT SHIP S-ON RL
HBOOD-1.12.0000
CPLD-None
MICROP-None
RADIO 0-5. 1204. 163r. 30
(is that what you wanted ?
Hmm i don't see a ruu with that number anywhere, and also no "new" stock nandroid backup
What's your exact cid
Fastboot oem readcid
Mr Hofs said:
Hmm i don't see a ruu with that number anywhere, and also no "new" stock nandroid backup
What's your exact cid
Fastboot oem readcid
Click to expand...
Click to collapse
TELNZ001
I think you are out of luck.....i can't find any useful info on your main version. Sorry mate..... Like you said, no ruu no matching firmware....
Mr Hofs said:
I think you are out of luck.....i can't find any useful info on your main version. Sorry mate..... Like you said, no ruu no matching firmware....
Click to expand...
Click to collapse
The Main version is reading 3.27.000.0 now after installing latest carbon 4.2.2 if this helps any
You need the main version that comes out with fastboot command.
Fastboot getvar version-main
The main number on a custom rom doesn't say anything. When you flash a wwe rom it will change to something like 3.14.401 or 2.17.401 for example.
You need the main version that is embedded in the hboot version.
Do the fastboot command and check if its the same number as stated in the opening post. If its different it might be useful
Mr Hofs said:
You need the main version that comes out with fastboot command.
Fastboot getvar version-main
The main number on a custom rom doesn't say anything. When you flash a wwe rom it will change to something like 3.14.401 or 2.17.401 for example.
You need the main version that is embedded in the hboot version.
Do the fastboot command and check if its the same number as stated in the opening post. If its different it might be useful
Click to expand...
Click to collapse
Have and Mainversion now reads 3.27.000.0 and HBOOT is still 1.12.0000
So its not the one from the OP. But still i haven't seen this number around either
Mr Hofs said:
So its not the one from the OP. But still i haven't seen this number around either
Click to expand...
Click to collapse
Yeh I have looked and cannot find anything either any ruu I use gets to around 80% then crashes with wrong boot error , they are the Telecom ones.Frustrating as well .
Mainver is higher than any mainver that exists for htc one.
I found out the androidinfo.txt in a zip file was updated in attempt to roll back software to ICS.
so basically i have two questions,
Is there ANY possible way to downgrade mainver. I have tried misc tool and cannot get it to work.
My other question is does anyone have a nandroid backup of JB for CID TELNZ001
and if i can get the backup all i need to do is upgrade the hboot. which i have also tried and have not been able to achieve.
Could someone please upload a backup image for cwm of JB TELNZ001 with updates included. and hboot file.
Or a firmware.zip with JB system, hboot, boot and recovery for TELNZ001.
thanks =]
im afraid there is nothing you can do...
if your hboot doesn't support JB you're out of luck
except hope that when sense 5 arrives it, comes with a higher main ver
misterr.mann said:
Mainver is higher than any mainver that exists for htc one.
I found out the androidinfo.txt in a zip file was updated in attempt to roll back software to ICS.
so basically i have two questions,
Is there ANY possible way to downgrade mainver. I have tried misc tool and cannot get it to work.
My other question is does anyone have a nandroid backup of JB for CID TELNZ001
and if i can get the backup all i need to do is upgrade the hboot. which i have also tried and have not been able to achieve.
Could someone please upload a backup image for cwm of JB TELNZ001 with updates included. and hboot file.
Or a firmware.zip with JB system, hboot, boot and recovery for TELNZ001.
thanks =]
Click to expand...
Click to collapse
thing is Telecom have brought out JB 4.1.2 and I cannot even get that to load back , stock was 4.1.1 any suggestions would help
Thing is. . I can update hboot.i have telnz001 hboot 1.39 i think. from memory. i just need to flash it. but i need the nandroid backup
You have hboot 1.12 that's a ics hboot, not a JB hboot.
---------- Post added at 05:55 AM ---------- Previous post was at 05:54 AM ----------
aluria2012 said:
It says
***Unlocked***
ENDEAVORU PVT SHIP S-ON RL
HBOOD-1.12.0000
CPLD-None
MICROP-None
RADIO 0-5. 1204. 163r. 30
(is that what you wanted ?
Click to expand...
Click to collapse
Look this is what you wrote
Mr Hofs said:
You have hboot 1.12 that's a ics hboot, not a JB hboot.
---------- Post added at 05:55 AM ---------- Previous post was at 05:54 AM ----------
Look this is what you wrote
Click to expand...
Click to collapse
i like how thats from a different username.. i didnt write that lol
my username is misterr.mann
I wrote that i had a ics hboot im not denying that, the part you missed was i have the 1.39 hboot for jb, which i can flash and am flashing right this second, although its not going to help me as it fails on OTA update, so what im saying is once im on hboot 1.39 ill still have that EXACT same issue, as my main ver is higher than any one that exists it wont ota update. so once hboot 1.39 is on all i will need is nandroid backup of JB telnz001, literally all i asked for was this nandroid backup rom.zip or firmware.zip
My mistake :thumbdown:
Okay so my HTC one is reverted completly back to stock (used custom ruu with system.img boot.img androiinfo.text etc)
I had to edit android txt file to MATCH my existing mainver.
After 2.17 update phone boots, gets to o lock ring, and reboots. does this constantly... non stop. my main ver is still higher then cicomming update mainver is still 3.78
i have a file for OTA update zip
file name:
OTA_ENDEAVOR_U_JB_45_S_Telecom_NZ_WWE_3.17.781.2-2.17.781.3_release_304681lsq8o9k2p8n4minf.zip
now there is no RUU for JB
My question is how can i install this update, i still have hboot for ics 1.12.0000
contents in OTA_ENDEAVOR_U_JB_45_S_Telecom_NZ_WWE_3.17.781.2-2.17.781.3_release_304681lsq8o9k2p8n4minf
contains firmware.zip with hboot 1.39
so i can extract hboot file
i can fully extract the entire firmware.zip contained in the OTA update.
But am having issues flashing through fastboot, and in RUU mode it comes back 99 unknown error
Im stuck between a rock and a hard place as both options for update fail
i tried creating a firmware.zip containing android txt file with my current mainver hboot 1.39 boot.img and recovery.img
yet this update fails.
any help would be appreicated thanks
Hi guys,
I got a HOX with CID VODAP102.
Using HBOOT 0.94.0000 and main version 1.28.161.9
Radio uknown ('none' says bootloader)
I want to update to JB, specifically CM10.1.
But i need to update my HBOOT, though can't seem to figure out how with my CID...
How would i go about this? The threads i found are either inconclusive or with different versions.
Oh yeah, this didn't work because of the CID thing:
http://forum.xda-developers.com/showthread.php?t=1924003
edit; just noticed, i already did the fastboot flash boot boot.img. So now i have a boot.img with an older version of the CM software. Which appearantly does not boot.
Thanks, Ice
are you rooted and unlocked?
matt95 said:
are you rooted and unlocked?
Click to expand...
Click to collapse
Rooted and unlocked. Been running CM10 for a while (beta's).
Device is still S-on though; but thats for all HOX's i think?
yeah, however to update your HBOOT you need to download the right firmware package for your CID here
Code:
# adb reboot bootloader
# fastboot oem lock
# fastboot oem rebootRUU
# fastboot flash zip firmware.zip
# fastboot reboot
now you need to unlock it again and flash a custom recovery... and that's it, flash whatever you want now
well that did it! at least; the phone boots again.
rebooted to bootloader and that now says hboot 1.36 which probably means i can update to 10.1.
just to be sure; i need to install CWM again, copy the boot.img and flash cm10.1?
ill try that tonight. just glad i can be reached again.. need the phone for work
Thanks!
edit; oh and unlock the bootloader again. Or is that not necessary since i should already have root access?
IceDustbin said:
well that did it! at least; the phone boots again.
rebooted to bootloader and that now says hboot 1.36 which probably means i can update to 10.1.
just to be sure; i need to install CWM again, copy the boot.img and flash cm10.1?
ill try that tonight. just glad i can be reached again.. need the phone for work
Thanks!
edit; oh and unlock the bootloader again. Or is that not necessary since i should already have root access?
Click to expand...
Click to collapse
you need to unlock the bootloader again, flash again the recovery through fastboot, full-wipe, flash the new rom nd its boot.img and that's it
Hi guys,
I have a kind of same problem but bigger, it means that I don't know how to root bcuz my phone is second hand.
My software is:
Android Revolution HD 7.1.0 by mike1986
HTC Sense 4.0
Android version 4.0.4
Additional Info:
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 0.94.0000
RADIO - 1.1204.103.14
CID - VODAP304
Versión Firmware o Bootloader: 1.28.161.9
Could someone tell me how I should do to get HTC Sense 5? I'd prefer the original firmware, but I don't mind having a root one neither.
Thanks
adr.lahoz said:
Hi guys,
I have a kind of same problem but bigger, it means that I don't know how to root bcuz my phone is second hand.
My software is:
Android Revolution HD 7.1.0 by mike1986
HTC Sense 4.0
Android version 4.0.4
Additional Info:
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 0.94.0000
RADIO - 1.1204.103.14
CID - VODAP304
Versión Firmware o Bootloader: 1.28.161.9
Could someone tell me how I should do to get HTC Sense 5? I'd prefer the original firmware, but I don't mind having a root one neither.
Thanks
Click to expand...
Click to collapse
you have a custom rom so you are already rooted. follow the instructions in post 4 above or go to this thread>>>>>http://forum.xda-developers.com/showthread.php?t=1975140 and go back to stock and your phone will update to the latest version
nogotaclue said:
you have a custom rom so you are already rooted. follow the instructions in post 4 above or go to this thread>>>>>http://forum.xda-developers.com/showthread.php?t=1975140 and go back to stock and your phone will update to the latest version
Click to expand...
Click to collapse
Thanks nogotaclue,
I will opt for go back to stock. Just I have two questions.
1. Which recovery.img should I choose? 1.26-1.29?
2. What do I have to be on mind to choose the Nandroid Stock? I have found these three on another website, and I don't know if there is any difference, basically the features in bold are what I don't understand!
- Nandroid Rom Vodafone España VODAP304
- Nandroid Rom Vodafone España 1.29 VODAP304
- Nandroid Rom Vodafone España VODAP304 [version firmware 2.17, banda base 2.1204, hboot 1.12 ROOT]
Thanks
adr.lahoz said:
Thanks nogotaclue,
I will opt for go back to stock. Just I have two questions.
1. Which recovery.img should I choose? 1.26-1.29?
2. What do I have to be on mind to choose the Nandroid Stock? I have found these three on another website, and I don't know if there is any difference, basically the features in bold are what I don't understand!
- Nandroid Rom Vodafone España VODAP304
- Nandroid Rom Vodafone España 1.29 VODAP304
- Nandroid Rom Vodafone España VODAP304 [version firmware 2.17, banda base 2.1204, hboot 1.12 ROOT]
Thanks
Click to expand...
Click to collapse
dont use any of those, you're best option is to go completely stock by using an ruu from the link I will post at the end for you. when you go to the page the ruu that you want is the 7th from the bottom, it will be version 1.28.161.9 and should be 609MB. start downloading it then there are some other things that you need to do in the meantime>>>>>http://www.androidruu.com/?developer=Endeavor make sure it matches exactly the version I have stated