Develop Bugs

Can't Boot (Note 2 N7100)

I rooted my phone, flashed CWM using odin. When i installed chainfire 3d driver, the phone started rebooting and it's stuck on "Galaxy Note II" screen. Please help ASAP. i tried re-flashing CWM but didn't work. :crying:

reflash stock rom without any wipe
BTW chainfire 3d will not work on JB

Really thanks for the reply
yahyoh said:
reflash stock rom without any wipe
BTW chainfire 3d will not work on JB
Click to expand...
Click to collapse
Yea, it isn't for JB, i came to know that after i messed up my phone.
Do i have to flash this? http://stockroms.net/file/GalaxyNote2/GT-N7100/India/GT-N7100_INU_1_20120921181332_.zip
And is the method same? like browsing from PDA tab and then Start?
OR it's this?
https://www.youtube.com/watch?v=2VVyQRdsnaA
Please reply ASAP.
I really appreciate your reply, i didn't expect it

Sujay Shinoda said:
Yea, it isn't for JB, i came to know that after i messed up my phone.
Do i have to flash this? http://stockroms.net/file/GalaxyNote2/GT-N7100/India/GT-N7100_INU_1_20120921181332_.zip
And is the method same? like browsing from PDA tab and then Start?
OR it's this?
https://www.youtube.com/watch?v=2VVyQRdsnaA
Please reply ASAP.
I really appreciate your reply, i didn't expect it
Click to expand...
Click to collapse
i think the first one will work
just unzip it u should get file with md5 or tar extensions put on pda in odin and put ur device on download mode u should get blue sign on id:com in odin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
btw it will take about 5-7 minute until it finished and don't unplug ur device until its reboot it self

Sujay Shinoda said:
I rooted my phone, flashed CWM using odin. When i installed chainfire 3d driver, the phone started rebooting and it's stuck on "Galaxy Note II" screen. Please help ASAP. i tried re-flashing CWM but didn't work. :crying:
Click to expand...
Click to collapse
Hey m8 dont worry you can fix it quick enough flash back to stock and dont install chainfire3D dosent work on JB as others have noted, i did the same thing the day I got my note 2.
---------- Post added at 05:44 PM ---------- Previous post was at 05:40 PM ----------
yahyoh said:
i think the first one will work
just unzip it u should get file with md5 or tar extensions put on pda in odin put ur device on download mode u should get blue sign on id:com in odin
btw it will take about 5-7 minute until it finished and don't unplug ur device until its reboot it self
Click to expand...
Click to collapse
This should work for the OP fine, this is the method i used. Remember to give the device a few minutes at the samsung logo after your flash completes, can appear its not doing anything, just leave it to do it's thing. If still stuck after 5 mins flash again.

thnx
yahyoh said:
i think the first one will work
just unzip it u should get file with md5 or tar extensions put on pda in odin and put ur device on download mode u should get blue sign on id:com in odin
btw it will take about 5-7 minute until it finished and don't unplug ur device until its reboot it self
Click to expand...
Click to collapse
thank you so much. doing that won't effect my personal files, will it?

Sujay Shinoda said:
thank you so much. doing that won't effect my personal files, will it?
Click to expand...
Click to collapse
no it won't

:'(
yahyoh said:
no it won't
Click to expand...
Click to collapse
Everything worked, thanks to you. but the LED notifications aren't working. only when i restart it, the LED turns blue. doesn't lit up even while charging. should i post a new thread?

Help me nexus 7 2013 os not installed

OK so I formatted my device through twrp after having kernels fail on me then I go to boot up the device and nothing happens , I go to
recovery mode then i check i have nothing in my sdcard / storage and when i go to reboot it says "No OS Installed".
Please help me I can't return the device since the bootloader is locked and i can't go into developer mode and enable USB debugging.

epicmoi44 said:
OK so I formatted my device through twrp after having kernels fail on me then I go to boot up the device and nothing happens , I go to
recovery mode then i check i have nothing in my sdcard / storage and when i go to reboot it says "No OS Installed".
Please help me I can't return the device since the bootloader is locked and i can't go into developer mode and enable USB debugging.
Click to expand...
Click to collapse
Can you boot in bootloader mode? (Turn off device and then hold power+down key)
Use wugfresh tool kit and you can solve all problems easily. Find the kit in general section!
Just plug in device and select restore nexus and select, nexus is bricked/bootloop
Jus sit back and it would do the rest

THANK YOU
hnk1 said:
can you boot in bootloader mode? (turn off device and then hold power+down key)
use wugfresh tool kit and you can solve all problems easily. Find the kit in general section!
Just plug in device and select restore nexus and select, nexus is bricked/bootloop
jus sit back and it would do the rest
Click to expand...
Click to collapse
omg thank you so much , you saved my device!!!!

Another problem
Hnk1 said:
Can you boot in bootloader mode? (Turn off device and then hold power+down key)
Use wugfresh tool kit and you can solve all problems easily. Find the kit in general section!
Just plug in device and select restore nexus and select, nexus is bricked/bootloop
Jus sit back and it would do the rest
Click to expand...
Click to collapse
Dude after I got everything software wise fixed , I see a white flashes behind everything
I can see my lockscreen and etc. but theres a annoying flash behind it.

epicmoi44 said:
Dude after I got everything software wise fixed , I see a white flashes behind everything
I can see my lockscreen and etc. but theres a annoying flash behind it.
Click to expand...
Click to collapse
Can you send me some screenshots ?
Hold power+volume down while device is on for screenshots!
Well, I'm not sure if it is light bleed or some software issue!
Secondly did you have this white flash light before or it just came ?

Hnk1 said:
Can you send me some screenshots ?
Hold power+volume down while device is on for screenshots!
Well, I'm not sure if it is light bleed or some software issue!
Secondly did you have this white flash light before or it just came ?
Click to expand...
Click to collapse
No it came after the after I finish rebooting after restoring to stock rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

epicmoi44 said:
No it came after the after I finish rebooting after restoring to stock rom.
Click to expand...
Click to collapse
I saw your image, I can't seem to see any white line!
Are you referring to Google now ? The white line with a mic icon on the end?
Can you use a reference point in your image to specify ?

martin 107
Hnk1 said:
I saw your image, I can't seem to see any white line!
Are you referring to Google now ? The white line with a mic icon on the end?
Can you use a reference point in your image to specify ?
Click to expand...
Click to collapse
Its more like glows than lines

epicmoi44 said:
Its more like glows than lines
Click to expand...
Click to collapse
Well, I am afraid you need to explain in details what exactly is happening.
You can use Google translate to translate in English if you are having troubles expressing it. Make sure you use full form/ standard language of your language or it would not be accurate translation!

Hnk1 said:
Well, I am afraid you need to explain in details what exactly is happening.
You can use Google translate to translate in English if you are having troubles expressing it. Make sure you use full form/ standard language of your language or it would not be accurate translation!
Click to expand...
Click to collapse
Lol I speak english don't worry , anyways the problem seemed to fixed on its own I let it drain the whole day and it pretty much fixed the problem.
Thanks anyways

I thought it was a ESL post as well. Must be texting speak. Sometimes I'll read back an Email to myself and think some prepositions and personal pronouns would really help these sentences LOL
For instance in the above sentence a 'that' before: some prepositions - would improve improve readability.
Sent from my Nexus 7 using XDA Free mobile app

Nokia X severely Bricked- Nokia emergency connectivity

hello
usuing cwm i formatted all partitions(boot,emmc..etc) and phone didn't boot or enter flash mod but vibrated with blank screen.
it detected as Qualcomm CDMA Technologies MSM but also as storage device,i cleaned partitions and created 1 partition with FAT file system.
now there is no any sign of life except Nokia emergency connectivity.
with or without battery only detects as below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any hope with repair boxes?

xsony.plus said:
hello
in cwm i formatted all partitions and phone didn't boot or enter flash mod but vibrated
it detected as Qualcomm CDMA Technologies MSM but also as storage device,i cleaned partitions and created 1 partition with fat file system.
now there is no any sign of life except Nokia emergency connectivity.
any hope with repair boxes?
Click to expand...
Click to collapse
You may have to flash The Stock Rom again !
Try out the Nokia Flasher Or The Nokia Studio ( can get it from the Nokia website as well as the Stock Rom )
reply of you had problems ! Peace

moda20 said:
You may have to flash The Stock Rom again !
Try out the Nokia Flasher Or The Nokia Studio ( can get it from the Nokia website as well as the Stock Rom )
reply of you had problems ! Peace
Click to expand...
Click to collapse
hello
im familiar with Nokia Care Suite also tried many times but phone doesn't detect.
best regards

xsony.plus said:
hello
im familiar with Nokia Care Suite also tried many times but phone doesn't detect.
best regards
Click to expand...
Click to collapse
Good then , have you tried Nokia X flasher ? you only need to Boot into the bootloader mode and selec the files needed

moda20 said:
Good then , have you tried Nokia X flasher ? you only need to Boot into the bootloader mode and selec the files needed
Click to expand...
Click to collapse
yes,but phone doesn't enter either flash mod or bootloader ,in fact deleted all partitions and fully formatted internal storage,so there is no any sign of life except Nokia emergency connectivity.

xsony.plus said:
yes,but phone didn't enter either flash mod or bootloader ,in fact deleted all partitions and fully formatted internal storage,so there is no any sign of life except Nokia emergency connectivity.
Click to expand...
Click to collapse
How can you know that it doesn't boot in bootloader mode ? the nokia Logo does appear right ?
If not i think you need to try the shop as a last resort

moda20 said:
How can you know that it doesn't boot in bootloader mode ? the nokia Logo does appear right ?
If not i think you need to try the shop as a last resort
Click to expand...
Click to collapse
nokia logo gone after wiping boot partition,how to get bootloader mode?(volume down+power didn't work)

xsony.plus said:
nokia logo gone after wiping boot partition,how to get bootloader mode?(volume down+power didn't work)
Click to expand...
Click to collapse
Wow ! you may need to consult the Nokia's support , and to enter bootloader mode you need to press power button untill vibrate and switch to Volume down , it will only show the Nokia Logo and stay there , if it does try to flash some recovery img and start over , it may work , i can't really say much more than this , sorry ...

y ...[/QUOTE]
any hope with repair boxes such as atf & z3x ????

it's bricked. follow @mdfzhi's tutorial on general section , use backup from other nokia x

AngSanley said:
it's bricked. follow @mdfzhi's tutorial on general section , use backup from other nokia x
Click to expand...
Click to collapse
im very grateful for your attention.
what about my case which all partitions are deleted and overwritten?
any hope with repair boxes?
best regards.

fixed by repair boxes.

my phone is nokia xl and had been encountering that same problem like yours. can you tell what did you do to fix it. thanks.

xsony.plus said:
fixed by repair boxes.
Click to expand...
Click to collapse
fix by repair box u mean jtag or some thing else? via usb only

guide here:
http://forum.xda-developers.com/noki...sboot-t3126617

Rk3066 1024x600 stuck on boot logo

Hello
I own this device :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I recently tried to update this device with the latest MALAY MOD rom.
The problem was that I didn't had the option to remove all data while updating. Thus resulting in an corrupt install.
I need to get into recovery mode now to install the rom from there, however I do not know how to enter recovery. I've tried all the possible ways that I could find without result.
The touchscreen buttons don't seem to give input to the device, except the power(like) button, if I press this button the screen goes black bit the machine keeps running. Pushing again makes the screen go on again. (this does not restart the device)
The reset button immediately shuts off the device, while holding it the unit stays off. When released the device starts up and gets stuck on boot logo.
I tried contacting the supplier, now 5 days later and still no reaction..
Does anyone have an idea?

try:
press and hold in power button, press rst briefly, let go of power more than 3 seconds after pressing rst

Hi,
I have the same car unit. I have not upgraded, but it does not run. Just booting. I don't know how to restore the factory settings. I can't reset.
Somebody knows? Please help me!
Thanks!

lincoln_dj said:
try:
press and hold in power button, press rst briefly, let go of power more than 3 seconds after pressing rst
Click to expand...
Click to collapse
Thanks for the reply, I just tried this but had no success
The "power button" doesn't do anything if I keep my finger on it (touch buttons).

honvedz said:
Hi,
I have the same car unit. I have not upgraded, but it does not run. Just booting. I don't know how to restore the factory settings. I can't reset.
Somebody knows? Please help me!
Thanks!
Click to expand...
Click to collapse
Did you try to contact your supplier?? He should be able to help.

Hi,
My sellers reply to me!
I can't insert download url.
If you are interested in the solution, send an email!

Thanks to @honvedz for this way to get into recovery mode !
honvedz said:
Hi,
My supplier reply to me.
http://speedy.sh/Akda7/AndroidCarHea...date-steps.doc
password: detidovepefi
Good luck!
Click to expand...
Click to collapse
i tested this and i actually get into recovery mode

This for Apple or android
أرسلت بواسطة iPad بإستخدام Tapatalk

Criticalpain26 said:
Thanks to @honvedz for this way to get into recovery mode !
i tested this and i actually get into recovery mode
Click to expand...
Click to collapse
Hello,
Same problem here but your link doesn't work anymore ...
Slts.

Steve-Austin said:
Hello,
Same problem here but your link doesn't work anymore ...
Slts.
Click to expand...
Click to collapse
Well luckily I saved a copy on my drive
I attached it and here is a link for online viewing :
http://www.docspal.com/viewer?id=dbaemqbp-12570265
Cheers!:good:

Criticalpain26 said:
Well luckily I saved a copy on my drive
I attached it and here is a link for online viewing :
http://www.docspal.com/viewer?id=dbaemqbp-12570265
Cheers!:good:
Click to expand...
Click to collapse
Thank-you for the link. Sadly, the trick doesn't work with my unit.

Steve-Austin said:
Thank-you for the link. Sadly, the trick doesn't work with my unit.
Click to expand...
Click to collapse
You need to unbrick the device with SD firmware tool :
https://forum.xda-developers.com/showpost.php?p=68717214&postcount=877

typos1 said:
You need to unbrick the device with SD firmware tool :
https://forum.xda-developers.com/showpost.php?p=68717214&postcount=877
Click to expand...
Click to collapse
Thanks but I already tried with sd, but it didn't work

Steve-Austin said:
Thanks but I already tried with sd, but it didn't work
Click to expand...
Click to collapse
Oh, not sure about that them have you tried to connect with adb ?

typos1 said:
Oh, not sure about that them have you tried to connect with adb ?
Click to expand...
Click to collapse
There is no usb port in front

Steve-Austin said:
There is no usb port in front
Click to expand...
Click to collapse
You can use ADB wifi or solder a usb port, there are instructions somewhere in the original thread.

You could ask in this thread :
https://forum.xda-developers.com/an...k-bootloop-t3635412/post73459256#post73459256
its for MTCD units but they are related, maybe some one could help you there ?

[Q] GT-N7105 Stuck on Samsung LOGO

Hello,
When i boot my phone, i cannot go further... :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can go into the ODIN MODE [VOLUME DOWN key and then press and hold the POWER button]
but when i try to go in recovery mode... [VOLUME DOWN key and then press and hold the POWER button]
I tried to flash a new rom with ODIN, downloaded on sam mobile, but it miserably failed...
I tried to fix it with kies, “Firmware Upgrade and Initialization" , it downloads something but doesnt do anything else..
What could i do to fix my phone?
I really appreciate any help you can provide. :good:

What error messages did you get in Odin?

@ Audit13
This is the error...

Looks like the phone is running a newer version of 4.4.2 than the firmware you are trying to flash. Download a version of 4.4.2 that is newer than nd3.

This is the only 4.4.2 available for my country sammobile.com
Maybe i should look, and download from another country, what do you think?

I'm experiencing the same issue as you with a N7100 tough.
I tried on a Windows VM with Odin, then on a physical Windows with Odin, then on a Linux machine with Heimdall, and it failed like you.
This is the log I have using heimdall: https://gist.github.com/wget/c898258625a076d07324385ada238572
And I was able to get the PIT file, but I don't know if the RECOVERY, SYSTEM and USERDATA partition are stil working https://gist.github.com/wget/695adc3aff04876a837b39f9fbbf53ab
My purpose is to be able to boot again to that device and recover its data.

You have tried different USB cables and USB ports?

Yes i did with various Samsung cable ,i also changed pc to try it, same error occured.

Can you flash a new recovery on it?

How do i flash a new recovery? Can you tell me what can i do with a new recovery ? (i ve read some informations about flashing recovery / custom recovery , but i dont really know how to proceed.)

andrewKode said:
Can you flash a new recovery on it?
Click to expand...
Click to collapse
How does this work?

Funland said:
How does this work?
Click to expand...
Click to collapse
Using Odin you can flash TWRP recovery and wipe everything on your phone. After that you can try to flash Stock again or a custom ROM. Maybe a CyanogenMod based. Good luck!
Trimis de pe al meu GT-N7100 folosind Tapatalk

Hello,
Using Odin you can flash TWRP recovery and wipe everything on your phone. After that you can try to flash Stock again or a custom ROM. Maybe a CyanogenMod based. Good luck!
Trimis de pe al meu GT-N7100 folosind Tapatalk
Click to expand...
Click to collapse
I tried this method, and this is what i get , maybe i'am doing something bad, what could be wrong?
I should wipe whole phone first in order to try this method?

i have the same with my N7100
was working great and suddenly stuck on Samsung logo.
all my screenshots are the same like above
one more is that when i go in download mode and connect to a pc i get the unknown device status
looks like everything is erased
if anyone can help please do

My i317 did the same thing all of a sudden....was running stock, no root. everything was fine and then poof, samsung logo.... now the phone won't even turn on anymore. Heard it's SDS so I got a hold of an old n7105 and switched the motherboard. Now looking for a ROM to flash since I'm starting from scratch again

I tried to install the recovery but it didnt work ( look my previous post)
What could i do to save my phone?

Hello , I'am still stuck with my phone. I don't really know what to do. I hope i can do something with this mobile phone , i dont want to throw it away.
If someone could help me

Funland said:
Hello , I'am still stuck with my phone. I don't really know what to do. I hope i can do something with this mobile phone , i dont want to throw it away.
If someone could help me
Click to expand...
Click to collapse
I also experience the same... Have you solve this problem? Thank you...