Related
I have finally upgraded my system to Windows 7 x64.
installed ABD and with test "adb devices" I got the (long) number, so ADB installed well.
But I can't install with fastboot. When Arc is connected it gives "waiting for devices"
I downloaded the official SE driver (http://developer.sonyericsson.com/wportal/devworld/downloads/download/sonyericssonxperiaarcxperianeoxperiaplaydrivers?cc=gb&lc=enbut when I tried to install this via Windows it don't recognize it as a driver, so it still don't work!!
( I used Adb a lot times with Windows XP without any problem)
Can someone help?
kind regards
Vintiem
Have a look at first post in this thread - have you copied the two files?
Vintiem said:
I have finally upgraded my system to Windows 7 x64.
installed ABD and with test "adb devices" I got the (long) number, so ADB installed well.
But I can't install with fastboot. When Arc is connected it gives "waiting for devices"
I downloaded the official SE driver (http://developer.sonyericsson.com/wportal/devworld/downloads/download/sonyericssonxperiaarcxperianeoxperiaplaydrivers?cc=gb&lc=enbut when I tried to install this via Windows it don't recognize it as a driver, so it still don't work!!
( I used Adb a lot times with Windows XP without any problem)
Can someone help?
kind regards
Vintiem
Click to expand...
Click to collapse
These are the win x64/x86 drivers i use for fastboot on my play. Afaik there the same as the arc.
http://www.multiupload.com/0XZV1LXRVA
Thank you but as I said I have this
number XXXXXXXXXXXXXX fastboot that means your phone successfully connected.
Its the S1 Boot fastboot driver. But when I let search Windows for this driver in my specific map where I downloaded the Official SE one, Windows says there's no driver, it can't be installed. This is my problem
I hope someone knows how to install this.
thanks
I think i had used one of the links to drivers found on the forum..
Don't exactly remember where i got it from.. I had the same problem with my Windows 7 64 bit .. Think the drivers a bit buggy..
AndroHero said:
These are the win x64/x86 drivers i use for fastboot on my play. Afaik there the same as the arc.
http://www.multiupload.com/0XZV1LXRVA
Click to expand...
Click to collapse
Thanks brother!!! . This works!!!
now I need also the flashtool drivers (tried a lot but no one works) Do you have this one too??
kind regards,
Vintiem
Vintiem said:
Thanks brother!!! . This works!!!
now I need also the flashtool drivers (tried a lot but no one works) Do you have this one too??
kind regards,
Vintiem
Click to expand...
Click to collapse
The links are there in this thread http://forum.xda-developers.com/showpost.php?p=16385162&postcount=3
Fastboot : http://www.multiupload.com/BMJ24IL6XY
Hi folks! i can't download the drivers. it says that the sourcefile cannot be downloaded. i also tried the drivers from die sonyericsson homepage. is there any fix for my problem?
The title says it all, well most of it. heres the problem:
I want to unlock the bootloader on my Xperia Play, I've tried many different ways to actually get fastboot to detect my phone I installed various drivers for S1 Semcboot but no luck, I also tried installing seus, uninstalling the drivers and letting seus re-install the s1 semcboot drivers but still no luck Ive been at it for a whole day... How can I get fastboot on windows 7 to detect my xperia play which is 100% bootloader unlockable...?
NOTE: The blue power led turns on when I hold search and connect the phone, the computer detects the phone but fastboot doesn't.
I have also tried lollylosts thread for drivers and stuff...
Any help would be appreciated please...
The usb driver file is here
its direct link, should work.
Thankyou but how am I supposed to use that driver?, windows 7 doesnt let me install drivers it only lets me update drivers when i try to update it doesnt install ...
Manny- said:
Thankyou but how am I supposed to use that driver?, windows 7 doesnt let me install drivers it only lets me update drivers when i try to update it doesnt install ...
Click to expand...
Click to collapse
Haven't really used Windows for a while but I think you can uninstall then reinstall drivers through device manager
I know you can, I've tried selecting many drivers by browsing and locating the folders but it just wont install...
Which fastboot command are you using?
Manny- said:
Thankyou but how am I supposed to use that driver?, windows 7 doesnt let me install drivers it only lets me update drivers when i try to update it doesnt install ...
Click to expand...
Click to collapse
I tried it, my device was detected but fastboot didnt pick the device up its driving my nuts I have no idea what I'm doing wrong
@Michealtbh
I tried this: fastboot.exe -i 0x0fce getvar version and also this: fastboot.exe devices, they dont work
http://forum.xda-developers.com/showthread.php?p=23692459
Maybe the files linked in this thread will help you, worth a shot.
Sent from my R800i using XDA
Thanks but made no difference, windows 7 detects the device but fastboot doesn't. :/
ch3mn3y said:
The usb driver file is here
its direct link, should work.
Click to expand...
Click to collapse
I still dont get how to install this driver...
Correct me if I'm wrong but I think you manually point to the drivers when your computer says that it doesn't recognise the device. Can't really remember how I installed them lol.
Sent from my R800i using XDA
Manny- said:
Thanks but made no difference, windows 7 detects the device but fastboot doesn't. :/
Click to expand...
Click to collapse
maybe you are using an outdated version of fastboot.exe? Have you tried pressing back key on boot or the volume down key? Have you seen your LED indicator turn or blink blue? Have you used tools or apps that can boot you into fastboot mode? are you rooted already? Have you tried following the Sony Ericsson guide on unlocking bootloader? If you followed this correctly especially downloading the right JAVA and latest Android SDK which includes the ADB drivers, then there will be no problems. Rooting and unlocking bootloader is the easiest part in my opinion when modding your Xplay. The hardest part for me was recovering from an almost bricked phone
http://unlockbootloader.sonymobile.com/
anbu187 said:
maybe you are using an outdated version of fastboot.exe? Have you tried pressing back key on boot or the volume down key? Have you seen your LED indicator turn or blink blue? Have you used tools or apps that can boot you into fastboot mode? are you rooted already? Have you tried following the Sony Ericsson guide on unlocking bootloader? If you followed this correctly especially downloading the right JAVA and latest Android SDK which includes the ADB drivers, then there will be no problems. Rooting and unlocking bootloader is the easiest part in my opinion when modding your Xplay. The hardest part for me was recovering from an almost bricked phone
http://unlockbootloader.sonymobile.com/
Click to expand...
Click to collapse
I tried the latest version and others...[1] Yes, I have tried pressing them everythings works as normal.. [2] Yes the LED turns blue doesnt blink though [3] No I havent tried any maybe you could point me in the right direction? [4] The device is rooted, yes [5] Yes I have followed the guide.. [6] and I have installed java and adb and drivers but its on another drive..
Manny- said:
I tried the latest version and others...[1] Yes, I have tried pressing them everythings works as normal.. [2] Yes the LED turns blue doesnt blink though [3] No I havent tried any maybe you could point me in the right direction? [4] The device is rooted, yes [5] Yes I have followed the guide.. [6] and I have installed java and adb and drivers but its on another drive..
Click to expand...
Click to collapse
check device manager in control panel and check if ADB driver is showing if not, try reinstalling those java and adroid sdk packages again in C:\
btw latest version puts fastboot.exe in android-platform tools folder
If you are still having trouble installing the fastboot drivers and you are using Windows 7 64bit, try the following link: http://forum.xda-developers.com/showthread.php?t=1554805
I had the same problem, but I could fix it by simply adding some lines into the .inf-file.
yesterday i had the same problem hen i tried to boot doomkernel v11. I use this drivers:
http://www.mediafire.com/?1jqvtofgc13figr
and it works (for me)
Thankyou everyone for your help, I will give what you all said a go and will report back here if it worked or not
oh btw @janitory Im using x32 (x86)
EDIT: also I get this error when Im installing the SDK on C:/ "Stopping ADB server failed (code -1)." does that make a difference?
hey guys having the same problem here i have xperia play screen stopped responding on sunday
i tried repairing via the sony tool got modified software error spent most of yesterday dismantling the phone putting back together reinstalling stock firmware turned out i needed to delete the bootloader key to repair done that via blagus and flash tool repaired phone but no joy
turn on phone today and its working again but now i need to unlock the bootloader again ive done all the steps on the sony site but at the getver part it just shows waiting for phone so im stuck at the moment unless one of you guys can help im on win7 32bit also but was able to use fast boot to flash custom kernels etc before today
---------- Post added at 06:57 PM ---------- Previous post was at 06:35 PM ----------
i uninstalled the phone in device manager it gave me the option to delete the driver file too i did this reconected the phone it installed and worked first time
Still no luck guys, anyone got a link to a full step by step guide to unlock the bootloader on xperia play using windows 7 x32 (x86) because I'm almost fed up of this
EDIT: Ive deleted the drivers installed loads of other drivers i.e. .inf or whatever files lol still nothing ... I mean what on earth could I be doing wrong
Tried to connect my phone to a Windows 7 64bit PC using the USB cable but Windows couldn't find the device driver for D5503. I found these from the Sony site and downloaded them but I couldn't install them manually either. Anyone managed to gracefully connect this to a PC?
robmif76 said:
Tried to connect my phone to a Windows 7 64bit PC using the USB cable but Windows couldn't find the device driver for D5503. I found these from the Sony site and downloaded them but I couldn't install them manually either. Anyone managed to gracefully connect this to a PC?
Click to expand...
Click to collapse
I've got the newest Sony PC Companion (thorugh Update) and my System recognized the phone directly.
Did you tried that approach also?
Telaran said:
I've got the newest Sony PC Companion (thorugh Update) and my System recognized the phone directly.
Did you tried that approach also?
Click to expand...
Click to collapse
Is that on windows 7 64 bit?
What do you mean by "through update"? I just downloaded PC companion from the Sony site.
robmif76 said:
Is that on windows 7 64 bit?
What do you mean by "through update"? I just downloaded PC companion from the Sony site.
Click to expand...
Click to collapse
I have a Win7 64Bit System. I have not yet tested on Win8.1 64bit, but will do in the next days.
"Through Update" means, that my (already installed) PC Companion had informed me for an updated version 1-2 weeks ago and I've installed it.
So last Friday I just plugged the Z1C and it the driver was installed and I was able to use my phone on the computer.
If you installed the PC Companion after you connected your phone, than you might have to remove the device within the device manager. After a reboot it should work. At least my experience with other Sony devices.
Telaran said:
I have a Win7 64Bit System. I have not yet tested on Win8.1 64bit, but will do in the next days.
"Through Update" means, that my (already installed) PC Companion had informed me for an updated version 1-2 weeks ago and I've installed it.
So last Friday I just plugged the Z1C and it the driver was installed and I was able to use my phone on the computer.
If you installed the PC Companion after you connected your phone, than you might have to remove the device within the device manager. After a reboot it should work. At least my experience with other Sony devices.
Click to expand...
Click to collapse
Ah found it!!
I didn't have Windows Media Player installed and that was screwing up MTP! All up and running now thatnks for your help.
robmif76 said:
Ah found it!!
I didn't have Windows Media Player installed and that was screwing up MTP! All up and running now thatnks for your help.
Click to expand...
Click to collapse
where do you download it ? I have the same isuue than you !
enzorator said:
where do you download it ? I have the same isuue than you !
Click to expand...
Click to collapse
I have Windows 7 Ultimate N so I just downloaded the media player feature pack from Microsoft. Not sure how to get it for other Windows versions though.
enzorator said:
where do you download it ? I have the same issue than you !
Click to expand...
Click to collapse
start -> control panel -> programs -> turn windows features on or off
check in list for Media Features, Windows Media Player should be there, enable it and it will automatically install.
OT: Im on win7 64bit. No problems at all. I did not have Pc companion installed before, but i installed it before connecting my phone for the first time.
just bought a xperia z1 compact, plugged into PC, didn't work.
found this thread, installed PC companion etc... still doesn't work. Windows 7 64bit just shows it with a yellow triangle in the device manager?!
I try to connect through PC companion and it does nothing, just sits there.
Please help!?:good:
Please read... It says that they manage to solve the issue by installing Windows Media Player.
Rodders_28 said:
just bought a xperia z1 compact, plugged into PC, didn't work.
found this thread, installed PC companion etc... still doesn't work. Windows 7 64bit just shows it with a yellow triangle in the device manager?!
I try to connect through PC companion and it does nothing, just sits there.
Please help!?:good:
Click to expand...
Click to collapse
I read that. But I have windows media player installed. Who doesn't on a Windows pc, its default?
I have it working on laptop, will give up with the PC.
Same problems as described above.
Following worked for my PC: (I have a Dutch windows (7, 64) and translated the following commands in English. So it is possible that these commands are named different in the English windows version.)
Go to device manager, right click on D5503 (with the yellow triangle), Search for device on my computer (second option), I want to choose from the driver list on my computer, uncheck view compatible hardware, standard MTP device, MTP USB device.
The Phone has to be set on MTP in the USB connection setting to use it with PC companion
Same issue here, any ideas?
USB debugging and MTP already worked successful, but now it's not working anymore.
Following situation:
If I disable USB debugging and plug USB cable into PC then nothing is shown in Windows Explorer and even not in the device manager. The field "MTP" is greyed out/disabled in XPERIA connectivity -> USB connection.
If I enable USB debugging, phone says "connected" however Windows is showing yellow triangle. I tried to download the drivers from http://developer.sonymobile.com/downloads/drivers/xperia-z1-compact-driver/ but Windows doesn't detect them.
If I try to uninstall the drivers right click on D5503 (with yellow triangle) nothing happens.
Phone reset the only idea?
Ok, I got it.
Just added the following lines to android_winusb.inf:
Code:
%SingleAdbInterface% = USB_Install, USB\VID_18D1&PID_D002
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_D002&MI_01
ZzetT said:
Ok, I got it.
Just added the following lines to android_winusb.inf:
Code:
%SingleAdbInterface% = USB_Install, USB\VID_18D1&PID_D002
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_D002&MI_01
Click to expand...
Click to collapse
Hi there, I'm having the same problem. I've installed the CWM recovery, but stupidly didn't check that I could access the phone over USB beforehand. Now I'm stuck with a continuously rebooting phone, and windows says it can't install the Sony driver.
When you said you added the above two lines to the android_winusb.inf file, what did you mean? I found this file in the
C:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_neutral_d58a98da913cec3a
folder, but couldn't edit it, even as admin.
Any help appreciated, thanks.
btek1003 said:
Hi there, I'm having the same problem. I've installed the CWM recovery, but stupidly didn't check that I could access the phone over USB beforehand. Now I'm stuck with a continuously rebooting phone, and windows says it can't install the Sony driver.
When you said you added the above two lines to the android_winusb.inf file, what did you mean? I found this file in the
C:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_neutral_d58a98da913cec3a
folder, but couldn't edit it, even as admin.
Any help appreciated, thanks.
Click to expand...
Click to collapse
Ok, I installed the driver on a notebook and was able to get a ROM (CM 11 M8 snapshot) loaded to /sdcard. But after I installed from zip, I'm still stuck in a boot loop to CWM recovery.
Anyone know how to get out of this?
btek1003 said:
Ok, I installed the driver on a notebook and was able to get a ROM (CM 11 M8 snapshot) loaded to /sdcard. But after I installed from zip, I'm still stuck in a boot loop to CWM recovery.
Anyone know how to get out of this?
Click to expand...
Click to collapse
If you can install PC Companion then it should be fine, the correct z1c driver will be installed for your windows and Adb will work normally. But just some people never can install PCC successfully and they will need to modify their android_winusb.inf to add two lines and let your windows to recognize your Z1c.
http://forum.xda-developers.com/showthread.php?t=2635830
Alternative way is to install Xperia driver set but I have never tried this method.
http://www.theandroidsoul.com/sony-xperia-z-ultra-fastboot-mode/
If you stuck in a boot loop with wrong recovery(I just tried it today). I'm afraid you have to flash a .ftf and clean all things out. At first, you can try to boot into fastboot mode(you will need to make sure your adb works) and try to flash other custom recovery and wish no boot loop again.
http://forum.xda-developers.com/sony-xperia-z1-compact/help/lb757-how-to-update-to-rooted-108-t2822957/post54297393#post54297393
If it doesn't work too, then you have to start from scratch for your phone. Please follow my guide step5 to step16.
TheEndHK said:
If you can install PC Companion then it should be fine, the correct z1c driver will be installed for your windows and Adb will work normally. But just some people never can install PCC successfully and they will need to modify their android_winusb.inf to add two lines and let your windows to recognize your Z1c.
http://forum.xda-developers.com/showthread.php?t=2635830
Alternative way is to install Xperia driver set but I have never tried this method.
http://www.theandroidsoul.com/sony-xperia-z-ultra-fastboot-mode/
If you stuck in a boot loop with wrong recovery(I just tried it today). I'm afraid you have to flash a .ftf and clean all things out. At first, you can try to boot into fastboot mode(you will need to make sure your adb works) and try to flash other custom recovery and wish no boot loop again.
http://forum.xda-developers.com/sony-xperia-z1-compact/help/lb757-how-to-update-to-rooted-108-t2822957/post54297393#post54297393
If it doesn't work too, then you have to start from scratch for your phone. Please follow my guide step5 to step16.
Click to expand...
Click to collapse
I went back to the previous snapshot, and that worked. Phone is up and running now.
Having said that, I'm sure I'll get myself into a mess like this again, so your links will be very useful!
Thanks.
I tried several times to flash tft stock file on my T2 Ultra single sim (d5306) but, after I tried mokee I can't, I'm using a PC with Windows 8.1 64 bits and I getting this:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
I just installed flashtool drivers by turning windows driver signature checking off, I tried with PC Companion also, but it doesn't recognize my phone, Can somebody help me?
PD. I tried in Windows 7 x86 and Ubuntu 14.04 and I got the same error.
xlison said:
I tried several times to flash tft stock file on my T2 Ultra single sim (d5306) but, after I tried mokee I can't, I'm using a PC with Windows 8.1 64 bits and I getting this:
I just installed flashtool drivers by turning windows driver signature checking off, I tried with PC Companion also, but it doesn't recognize my phone, Can somebody help me?
PD. I tried in Windows 7 x86 and Ubuntu 14.04 and I got the same error.
Click to expand...
Click to collapse
hello, have you figured out how to solve this?
same boat...
thanks for reading
Still the same here
dubmehard said:
hello, have you figured out how to solve this?
same boat...
thanks for reading
Click to expand...
Click to collapse
I can't use flash stock rom with flashtool even using Sony PC Companion, after multiple attempts I found a solution to flash Lollipop using recovery, you need the .ftf file and PRFCreator: http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904 , this will create a flasheable zip that you can flash using a recovery, remember to do a wipe cache before.
I hope this helps.
Hey, I am having trouble pushing TWRP onto my op3 via fastboot. I managed to unlock my bootloader successfully but after that, I know cannot flash TWRP. When I type in "adb devices" It returns a string, however "fastboot devices" does nothing. I've uninstalled and re-installed oneplus usb, fastboot and adb drivers countless time and even reset my PC twice. Any ideas? This is really frustrating as I was on TWRP fine before I had to RMA my op3 where they put it back to stock. Any ideas? Thanks
I have the same problem ADB works but Fastboot not.... I have all drivers correct installed..
Rom: OOS 3.2.7
PC: Windows 10
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
ELoTRIX said:
I have the same problem ADB works but Fastboot not.... I have all drivers correct installed..
Rom: OOS 3.2.7
PC: Windows 10
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
Yeah me too, same ROM and PC OS. Very strange
CallumL701 said:
Yeah me too, same ROM and PC OS. Very strange
Click to expand...
Click to collapse
Got the same problem too, after unlocking the bootloader the fastboot devices cannot find anything
Tested several drivers and even another laptop :/
Rom: OOS 3.2.7
PC: Windows 10
But phone starts ok in OOS system?
If, yes, download TWRP 3.0.2.1 original & TWRP 3.0.2.1-19 modified. Put them in phone sd card. Download FLashify from Play store and flash recovery .img. Then go recovery to test if it works.
One of those will work.
inflames19 said:
Got the same problem too, after unlocking the bootloader the fastboot devices cannot find anything
Tested several drivers and even another laptop :/
Rom: OOS 3.2.7
PC: Windows 10
Click to expand...
Click to collapse
CallumL701 said:
Yeah me too, same ROM and PC OS. Very strange
Click to expand...
Click to collapse
I've solved that problem by installing Windows 7 on a Virtual Machine the phone Was recognized and has installed the drivers by itself. And fastboot was working
I don't know why fastboot is not working on Windows 10....
Thanks for the different solutions, I'll try it for myself.
But I'm still wondering why the unlock worked because there it used fastboot too
1
me too its says : Witting for devices !!!
Rom: OOS 3.2.7
PC: Windows 10
CallumL701 said:
Hey, I am having trouble pushing TWRP onto my op3 via fastboot. I managed to unlock my bootloader successfully but after that, I know cannot flash TWRP. When I type in "adb devices" It returns a string, however "fastboot devices" does nothing. I've uninstalled and re-installed oneplus usb, fastboot and adb drivers countless time and even reset my PC twice. Any ideas? This is really frustrating as I was on TWRP fine before I had to RMA my op3 where they put it back to stock. Any ideas? Thanks
Click to expand...
Click to collapse
Had the same issue, here's what fixed it for me:
(On Windows 10)
1 - Plug your device while on and install the OP3 drivers that appear as a removable disk, I reinstalled them also, so no harm in doing that again.
2 - Run admin command prompt from wherever you have your adb and fastboot
3 - get your device into fastboot/bootloader mode "adb reboot bootloader"
4 - press windows key + X and go to device manager, look for the Android device with exclamation mark
5 - right click on Android Device > update driver software > browse my computer... > let me pick... > look for Android and then select Android Fastboot Interface if memory serves me right.
And that's it. Fastboot should be recognized now. That's what worked for me when windows recognized adb but not fastboot, hope it helps out.
Remember to hit the thanks button if I helped you out.
1
rpsgrayfox said:
Had the same issue, here's what fixed it for me:
(On Windows 10)
1 - Plug your device while on and install the OP3 drivers that appear as a removable disk, I reinstalled them also, so no harm in doing that again.
2 - Run admin command prompt from wherever you have your adb and fastboot
3 - get your device into fastboot/bootloader mode "adb reboot bootloader"
4 - press windows key + X and go to device manager, look for the Android device with exclamation mark
5 - right click on Android Device > update driver software > browse my computer... > let me pick... > look for Android and then select Android Fastboot Interface if memory serves me right.
And that's it. Fastboot should be recognized now. That's what worked for me when windows recognized adb but not fastboot, hope it helps out.
Remember to hit the thanks button if I helped you out.
Click to expand...
Click to collapse
I've done everything U said but when it on the Bootloader it says waiting for device
Thank you to try solve the problem
Since there are a lot of people complaining I think the problem is bigger than we think :/ My OP3 nor OPO are seen
CallumL701 said:
Hey, I am having trouble pushing TWRP onto my op3 via fastboot. I managed to unlock my bootloader successfully but after that, I know cannot flash TWRP. When I type in "adb devices" It returns a string, however "fastboot devices" does nothing. I've uninstalled and re-installed oneplus usb, fastboot and adb drivers countless time and even reset my PC twice. Any ideas? This is really frustrating as I was on TWRP fine before I had to RMA my op3 where they put it back to stock. Any ideas? Thanks
Click to expand...
Click to collapse
Sir Mohd said:
I've done everything U said but when it on the Bootloader it says waiting for device
Thank you to try solve the problem
Click to expand...
Click to collapse
I'm sorry to hear it didn't work, I'd try to reinstall adb and fastboot then using Minimal Adb and Fastboot found in this thread http://forum.xda-developers.com/showthread.php?t=2317790
ELoTRIX said:
I've solved that problem by installing Windows 7 on a Virtual Machine the phone Was recognized and has installed the drivers by itself. And fastboot was working
I don't know why fastboot is not working on Windows 10....
Click to expand...
Click to collapse
Please tell us how you did That ,
Ty.
Sir Mohd said:
Please tell us how you did That ,
Ty.
Click to expand...
Click to collapse
I have just installed on my Windows 10, a Virtual Machine (VMware) with Windows 7 installed all driver oneplus 3 and adb+fastboot and it works
I have the same issue. Got my OP3 yesterday and have been trying in vain to get my Windows 10 install to recognise the phone in fastboot mode, but to no avail. I am unable to unlock my bootloader.
I think the problem is with Windows 10. My laptop did an update yesterday, I think that's the problem.
Got some news for you:
I was so frustrated that I decided to install Windows 7 over my Windows 10 and have a try.
Well what should I say: everything worked on the first try, without any problems with the original driver which comes with the op3 when you plugin the phone.
Hope I could help
It appears to be an issue with Windows 10 drivers. I have used an ancient install of Xubuntu on an older EeePC in order to unlock the bootloader and flash TWRP and SuperSU. I've still had no luck getting fastboot to be recognised on Windows 10, though on Xubuntu, it is recognised instantly with no issues.
inflames19 said:
Got some news for you:
I was so frustrated that I decided to install Windows 7 over my Windows 10 and have a try.
Well what should I say: everything worked on the first try, without any problems with the original driver which comes with the op3 when you plugin the phone.
Hope I could help
Click to expand...
Click to collapse
I'v Windows 7 Can you explain how ? and what the required files ?
Thank u
Sir Mohd said:
I'v Windows 7 Can you explain how ? and what the required files ?
Thank u
Click to expand...
Click to collapse
I'm not at my pc atm but I'll try my best:
If you plugin your op3 there will be a cd mounted with the setup for the driver.
I just installed this driver with the setup.exe (on a complete new instance of Windows 7).
After the installer was finished, I opened cmd.exe and could use adb and fastboot.