Develop Bugs

inding out InfoCID for G2?

I am trying to get root on a T-Mobile G2 that has obtained the 1.72 OTA update and I have followed the commands from the G2 Downgrading Thread on using ADB and Fastboot but this is the output I get:
C:\Users\ZeroXR\Downloads\android-sdk-windows\platform-tools>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8D0876E8
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x25200
(bootloader) TAG:hero panel = 0xF
(bootloader) TAG:engineerid = 0x4
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is T-MOB010
(bootloader) setting->cid::T-MOB010
(bootloader) serial number: HT09MR211333
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =462
(bootloader) active commandline: board_vision.disable_uart2=0 board_visio
(bootloader) n.usb_h2w_sw=0 board_vision.disable_sdcard=0 diag.enabled=0
(bootloader) board_vision.debug_uart=0 smisize=0 userdata_sel=0 androidbo
(bootloader) ot.emmc=true androidboot.baseband=26.03.02.26_M androidboot
(bootloader) .cid=T-MOB010 androidboot.batt_poweron=good_battery androidb
(bootloader) oot.carrier=TMUS androidboot.mid=PC1010000 androidboot.keyca
(bootloader) ps=qwerty androidboot.mode=normal androidboot.serialno=HT09M
(bootloader) R211333 androidboot.bootloader=0.82.0000 no_console_suspend=
(bootloader) 1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) aARM_Partion[6].name=devlog
(bootloader) partition number=7
(bootloader) Valid partition num=7
(bootloader) jump_to_kernel: machine_id(2245), tags_addr(0x4000100), kern
(bootloader) el_addr(0x4008000)
(bootloader) -------------------hboot boot time:93835 msec
FAILED (status read failed (Too many links))
finished. total time: 8.418s
Some post I have seen say the CID is the InfoCID and some say that it isn't... Is anyone able to give a definitive answer? I would like to know whether or not I have to make a goldcard to get root.

Yeah, it means your CID (T-MOB010). The downgrade guide you are trying to follow isn't for the G2 though, only the Desire Z. You also don't have the 1.72 OTA. The G2's have only received a 1.22 OTA (with the newer G2's having the update pre-installed), which doesn't needed to be downgraded in order to root.
You can just follow the guide in the Wiki.

Thanks for the verification because I was so leery of rooting from all the stuff I was reading about the downgrading then rooting. I just rooted my phone and I am extremely happy to have it rooted!

[Q] Desire boot problems

I have an unrooted Desire, which doesn't work like it should anymore. When I try to boot it, it stucks on the first white screen with HTC logo.
When I take out the battery for a while, it will sometimes boot. But after an hour it will reboot itself, and get stuck in boot again.
Also, sometimes, the phone will try to boot, stays on for 5 seconds, turns itself off, and boots again, stays on 5 seconds, etc.
I can get into recovery, using volume down and power, and executed the 'fastboot oem boot' commando, with results:
C:\Users\Niek>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__E11
(bootloader) setting->cid::HTC__E11
(bootloader) serial number: HT06RPL00507
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =423
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.27 androidboot.cid=H
(bootloader) TC__E11 androidboot.carrier=HTC-Dutch androidboot.mid=PB9920
(bootloader) 000 androidboot.keycaps=qwerty androidboot.mode=normal andro
(bootloader) idboot.serialno=HT06RPL00507 androidboot.bootloader=0.93.000
(bootloader) 1 no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) mpu_nand_acpu_rw A1E 1000
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:30551 msec
FAILED (status read failed (Too many links))
finished. total time: 4.830s
Click to expand...
Click to collapse
I'm not sure what this means.

try another usb cable or another usb port
remove battery from phone, then restart phone vol down + power, click fastboot before conecting USB cable (" waiting for phone"), conect cable .....
retry your command

I removed the battery, put it back in (else it won't boot ofc), vol down + power, clicked fastboot, on pc executed 'fastboot oem boot', plugged usb cable in:
C:\Users\Niek>fastboot oem boot
< waiting for device >
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__E11
(bootloader) setting->cid::HTC__E11
(bootloader) serial number: HT06RPL00507
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =423
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.27 androidboot.cid=H
(bootloader) TC__E11 androidboot.carrier=HTC-Dutch androidboot.mid=PB9920
(bootloader) 000 androidboot.keycaps=qwerty androidboot.mode=normal andro
(bootloader) idboot.serialno=HT06RPL00507 androidboot.bootloader=0.93.000
(bootloader) 1 no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) mpu_nand_acpu_rw A1E 1000
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:40362 msec
FAILED (status read failed (Too many links))
finished. total time: 7.080s
Click to expand...
Click to collapse
It did boot all the way though. There is no SD or SIM card in the phone.

Usb brick???
http://forum.xda-developers.com/showthread.php?t=691639

I says I need root, which I don't have.
When I try to root the phone, it fails, because in the process it needs to reboot several times, and every time in the last reboot, the boot fails..

http://forum.xda-developers.com/showthread.php?t=833953&highlight=desire&page=1
never used it but its the last chance you have, or its off to HTC your phone will have to go...
Unless anyone else can see a solution? Because i've never had this problem so I am far from an expert

Were you s-off and changed your hboot to one from alpharev?

MatDrOiD said:
Were you s-off and changed your hboot to one from alpharev?
Click to expand...
Click to collapse
It isn't my phone, and the owner said he didn't do anything special with it. So it is still as it was when he bought it.
---------- Post added at 01:36 AM ---------- Previous post was at 01:19 AM ----------
BigMrB said:
http://forum.xda-developers.com/showthread.php?t=833953&highlight=desire&page=1
never used it but its the last chance you have, or its off to HTC your phone will have to go...
Unless anyone else can see a solution? Because i've never had this problem so I am far from an expert
Click to expand...
Click to collapse
I did the root via the app, that worked (the temporary one), and also the usb brick fix worked.
This is what I did in a shell:
C:\Users\Niek>adb shell
$ su
su
# cat /sdcard/flash_image > /data/flash_image
cat /sdcard/flash_image > /data/flash_image
# cat /sdcard/mtd0.img > /data/mtd0.img
cat /sdcard/mtd0.img > /data/mtd0.img
# chmod 755 /data/flash_image
chmod 755 /data/flash_image
# /data/flash_image misc /data/mtd0.img
/data/flash_image misc /data/mtd0.img
Click to expand...
Click to collapse
When I rebooted the phone, it went into the boot - off - boot - off cycle again.
I ran the 'fastboot oem boot' command again:
C:\Users\Niek>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__E11
(bootloader) setting->cid::HTC__E11
(bootloader) serial number: HT06RPL00507
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =423
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.27 androidboot.cid=H
(bootloader) TC__E11 androidboot.carrier=HTC-Dutch androidboot.mid=PB9920
(bootloader) 000 androidboot.keycaps=qwerty androidboot.mode=normal andro
(bootloader) idboot.serialno=HT06RPL00507 androidboot.bootloader=0.93.000
(bootloader) 1 no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) mpu_nand_acpu_rw A1E 1000
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:21557 msec
FAILED (status read failed (Too many links))
finished. total time: 4.770s
Click to expand...
Click to collapse
By the way, now it did the cycle again for 4-5 times, and gave 7 vibrates. Then nothing.

Sounds like motherboad brick to me.

Vibrate 7 times.... Oh dear
Motherboard failure i would guess.... send to HTC for repair i'm afraid

That's a very bad sign?
Well, then I'll give up.. There's a crack in the screen anyway, and repairing that and this problem is not worth it.
Thanks anyway

USB bricked, what to do?

Resolved: It was an issue with the Leedroid beta rom I was using, installing the kernel update that is listed on his post on here fixed it up.
Hey all, I'm hoping I can get some help with this.
I just rooted my desire hd (telus version, if that matters) using this method: driphter.com/index.php?topic=3867.0. Now there are some posts on doing it differently with a telus version, but I belive this should have worked, and it did, perfectly, except can not access my phone via USB now. I have searched for solutions, the simpler one, using the fastboot oem eraseconfig which gives me this:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Dman>cd C:\AndroidFlasher\Data\
C:\AndroidFlasher\Data>fastboot oem eraseconfig
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.000s]
finished. total time: 0.000s
C:\AndroidFlasher\Data>
And after looking through the other guide (forum.xda-developers.com/showthread.php?t=691639) when I search for the cid, the output i get is :
C:\AndroidFlasher\Data>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8D088398
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x27E03
(bootloader) TAG:hero panel = 0x1
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is TELUS001
(bootloader) setting->cid::TELUS001
(bootloader) serial number: SH15KTZ02927
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =459
(bootloader) active commandline: board_spade.disable_uart2=0 board_spade.
(bootloader) usb_h2w_sw=0 board_spade.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_spade.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=true androidboot.baseband=26.03.02.26_M androidboot.cid
(bootloader) =TELUS001 androidboot.batt_poweron=good_battery androidboot.
(bootloader) carrier=TELUS androidboot.mid=PD9814000 androidboot.keycaps=
(bootloader) qwerty androidboot.mode=normal androidboot.serialno=SH15KTZ0
(bootloader) 2927 androidboot.bootloader=0.85.0007 no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) aARM_Partion[6].name=devlog
(bootloader) aARM_Partion[7].name=pdata
(bootloader) partition number=8
(bootloader) Valid partition num=8
(bootloader) jump_to_kernel: machine_id(2844), tags_addr(0x4000100), kern
(bootloader) el_addr(0x4008000)
(bootloader) -------------------hboot boot time:304537 msec
FAILED (status read failed (Too many links))
finished. total time: 10.419s
I have no mtd0.img file on my phone,
and, I have :
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is TELUS001
(bootloader) setting->cid::TELUS001
Does this mean I need to restore something, or do I use TELUS001..
Hope to get some input on this before I go ahead and mess something up.
Sorry by the way, this is my first time messing with rooting and android though Im decent with linux..
Other question, in the mtd0.iso provided, do I need to change the number at the end to anything?
Thanks a lot to anyone who can help.
Edit: after reading a little more, I think I don't completely understand flashing, and I shouldn't be expecting to find that file on my phone, though my output still seems a bit odd and I'm wondering if i should be restoring something rather that creating the image from the file provided. Also whether the mod I'm using etc has to be entered into the mtd0.img i download at all? or just the CID? Lastly, probably a stupid question, what is the flash_image file for....
Live and learn
A little bit more info, it shows up in devive monitor as android device on two computers but still dows not give me any options on the phone

Just Bootloader/Fastboot

Hello
First I am sorry for my bad english.
To my problem:
I have a WFS that absolutely does not want to boot. The only thing that still works is the bootloader and fastboot. No matter what I do, it always ends in a Bootloop. Be it a normal start, recovery or factory reset. 've Re-flashed via PG76IMG.zip/RUU up and play new recovery via fastboot. Neither the original nor CWM recovery can be started. The flash was always confirmed with OK but then I end up back in just a Bootloop. The Bootloop seems no matter what I always do the same, it takes about 3 seconds for the HTC logo and then it restarts. Maybe someone here has an idea what I could try?
Here's the info from the phone:
*** RELOCKED ***
MARVEL PVT SHIP S-ON RH
HBOOT-1.09.0099
MICROP-0451
RADIO-7.57.39.10M
Feb 8 2012, 18:29:31
Edit:
I have tried the following:
fastboot oem boot
...
(bootloader) setup_tag addr=0x60000100 cmdline add=0x9D0746B8
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x28806
(bootloader) TAG:hero panel = 0x5
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) TAG:TP = 1
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__102
(bootloader) setting->cid::HTC__102
(bootloader) serial number: SH2*********
(bootloader) commandline from head: no_console_suspend=1 console=null
(bootloader) command line length =535
(bootloader) active commandline: board_marvel.disable_uart3=0 board_marve
(bootloader) l.usb_h2w_sw=0 board_marvel.disable_sdcard=0 diag.enabled=0
(bootloader) board_marvel.debug_uart=0 smisize=0 userdata_sel=0 androidbo
(bootloader) ot.emmc=false androidboot.pagesize=2048 androidboot.baseban
(bootloader) d=7.57.39.10M androidboot.cid=HTC__102 androidboot.batt_powe
(bootloader) ron=good_battery androidboot.carrier=HTC-GER androidboot.mid
(bootloader) =PG7610000 androidboot.keycaps=qwerty androidboot.mode=norma
(bootloader) l androidboot.serialno=SH2********* androidboot.bootloader=1
(bootloader) .09.0099 zygote_oneshot=off kmemleak=off no_console_suspend=
(bootloader) 1 console=null
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) aARM_Partion[6].name=devlog
(bootloader) partition number=7
(bootloader) Valid partition num=7
(bootloader) Delay 99993(us) for dpram command before goto AMSS...
FAILED (status read failed (Too many links))
finished. total time: 1.199s
And then...:
IMAGE CRC
osbl: 0x0
amss: 0x0
hboot: 0xF685DEFF
boot: 0xAC0E9C41
recovery: 0xC2B13A0A
system: 0x23F3082D
Is OSBL/AMSS broken and it comes from?

Can be closed...

[Q] Need Backup of Stock Rom For HTC Desire Z A7272 (CID: HTC__038)

Hi All,
It look, I have a semi bricked phone (HTC Desire Z A7272), But I can boot the phone into recovery.
It hangs on HTC Logo, USB Debugging is not enabled.
I Need the Stock Backup for my phone, If any one have it please post it on this thread.
Here is the Boot Loader status and log.
*****UNLOCKED********
VISION PVT S-ON
HBOOT-0.85.0015
MICROP-0425
RADIO-26.10.04.03_M
eMMC-boot
Dec 20 2011, 16:21:13
****************************
C:\adtx86SDK\sdk\platform-tools>fastboot oem boot
< waiting for device >
...
(bootloader) setup_tag addr=0xC0000100 cmdline add=0x8D0935B4
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x25209
(bootloader) TAG:hero panel = 0xF
(bootloader) TAG:engineerid = 0x4
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__038
(bootloader) setting->cid::HTC__038
(bootloader) serial number: SH0CDRT03500
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =499
(bootloader) active commandline: board_vision.disable_uart2=0 board_visio
(bootloader) n.usb_h2w_sw=0 board_vision.disable_sdcard=0 diag.enabled=0
(bootloader) board_vision.debug_uart=0 smisize=0 userdata_sel=0 androidbo
(bootloader) ot.emmc=true androidboot.baseband=26.10.04.03_M androidboot
(bootloader) .cid=HTC__038 androidboot.batt_poweron=good_battery androidb
(bootloader) oot.carrier=HTC-India androidboot.mid=PC1011000 androidboot.
(bootloader) keycaps=qwerty androidboot.mode=normal androidboot.serialno=
(bootloader) SH0CDRT03500 androidboot.bootloader=0.85.0015 zygote_oneshot
(bootloader) =off kmemleak=off no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) aARM_Partion[6].name=devlog
(bootloader) aARM_Partion[7].name=pdata
(bootloader) partition number=8
(bootloader) Valid partition num=8
(bootloader) jump_to_kernel: machine_id(2245), tags_addr(0x4000100), kern
(bootloader) el_addr(0x4008000)
(bootloader) -------------------hboot boot time:87690 msec
FAILED (status read failed (Too many links))
finished. total time: 8.365s
Also I need suggestion weather I can recover my phone in this way or not.
Please help me out.....

Delete...

I'm not sure you could flash someone else back-up...

What is your recovery?
Sent from my Nexus 7 using XDA Premium 4 mobile app

Official RUU_Vision_hTC_Asia_India CID: HTC_038
demkantor said:
What is your recovery?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi,
Thanks for the response, I need the Backup Or
Please give me the link from where I can Download official RUU for my phone, so that I can flash my rom.
C:\adtx86SDK\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.85.0015
(bootloader) version-baseband: 26.10.04.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0425
(bootloader) version-main: 2.42.0.0
(bootloader) serialno: SH0CDRT03500
(bootloader) imei: 352212047348870
(bootloader) product: vision
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PC1011000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 3748mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3cd54d84
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.003s

http://forum.xda-developers.com/showthread.php?t=2094420

Official RUU_Vision_hTC_Asia_India CID: HTC_038
Kéno40 said:
http://forum.xda-developers.com/showthread.php?t=2094420
Click to expand...
Click to collapse
Hi,
Thanks for the quick reply.
I tried the below given RUU's but it gives me Unknown Error while running the RUU's and sending the update to the phone.
RUU_Vision_Gingerbread_S_hTC_Asia_TW_2.42.709.10_Radio_12.56.60.25_26.10.04.03_M_release_201045_signed.exe
RUU_Vision_Gingerbread_S_HTC_WWE_2.42.405.3_Radio_12.56.60.25_26.10.04.03_M_release_224299_signed.exe
I need the RUU for below given Information since my phone is not S-OFF.
RADIO-26.10.04.03_M
cid::HTC__038
version-main: 2.42.0.0 (Currently it's showing this)
OR
version-main: 2.42.709.2 (It used to be this one)