Related
Can someone please share this for me? I am using the i9300 and having wifi calling will be a real improvement for me. I've tried searching, all I get so far is that the apk works only on touchwiz (which is what I have), but nobody's put up a link to this mythical thing
It only works for Tmobile, if you're using international S3 it won't work.
It's not just a apk, it's in the framework too.
Powered by the SGSIII
ThC23 said:
It only works for Tmobile, if you're using international S3 it won't work.
It's not just a apk, it's in the framework too.
Powered by the SGSIII
Click to expand...
Click to collapse
I am on an Omega Jelly Bean ROM on t-mobile, with the i9300 variant. Don't I check all the right boxes? I thought the framework that it needed was part of touchwiz?
its way way more complicated then what you think it is.
Sent from my SGH-T999 using xda premium
The pack has to be built for touchwiz because of the libs used to make it work.
You need the wifi calling provisioning or it won't route the UMA traffic over the right T-Mobile gateway.
Files:
system/app/com.android.kineto.apk
system/lib/libganril.so
system/lib/lib_ril_switch.so <--- may be custom modded for vendor (ie: Samsung, HTC etc)
system/lib/libkineto.so
system/lib/libreference-ril.so
system/lib/librilswitch.so
There may or may not be other files but you can see it's not just an APK.
datafoo said:
The pack has to be built for touchwiz because of the libs used to make it work.
You need the wifi calling provisioning or it won't route the UMA traffic over the right T-Mobile gateway.
Files:
system/app/com.android.kineto.apk
system/lib/libganril.so
system/lib/lib_ril_switch.so <--- may be custom modded for vendor (ie: Samsung, HTC etc)
system/lib/libkineto.so
system/lib/libreference-ril.so
system/lib/librilswitch.so
There may or may not be other files but you can see it's not just an APK.
Click to expand...
Click to collapse
Thank you, that's a great start! When I get back home today, I'll take a stab at extracting these from a T999 update and try it out. If it works, I'll see how complicated creating an update.zip is and package it.
datafoo said:
The pack has to be built for touchwiz because of the libs used to make it work.
You need the wifi calling provisioning or it won't route the UMA traffic over the right T-Mobile gateway.
Files:
system/app/com.android.kineto.apk
system/lib/libganril.so
system/lib/lib_ril_switch.so <--- may be custom modded for vendor (ie: Samsung, HTC etc)
system/lib/libkineto.so
system/lib/libreference-ril.so
system/lib/librilswitch.so
There may or may not be other files but you can see it's not just an APK.
Click to expand...
Click to collapse
That is a start but im afraid that's about all it is. You'd also need wificall.apk (com.movial.wifiicall) and probably some binary files.
Also, even if you managed to get all the correct files, you would then need to port the code over to settings so you can use it. There is also probably code in systemui, framework, etc. I just doubt that simply flashing the files to your phone will work...unless the i9300 version of tw has it already and you just need it to work for tmobile. I dont think itll be a quick or easy thing to do.
Sent from my SGH-T999 using xda app-developers app
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thanks
FNM
find wifi calling
sarathmenon said:
I am on an Omega Jelly Bean ROM on t-mobile, with the i9300 variant. Don't I check all the right boxes? I thought the framework that it needed was part of touchwiz?
Click to expand...
Click to collapse
Did you check under settings? On late model phones it's not an apk, but built into the phone.
kb
It is possible to get wifi calling on your i9300. As seen here http://www.youtube.com/watch?v=ZHhjduFCCug] need to flash a T-Mobile S3 ROM on your phone. Much more simply than the methods discussed above.
anteko said:
It is possible to get wifi calling on your i9300. As seen here http://www.youtube.com/watch?v=ZHhjduFCCug] need to flash a T-Mobile S3 ROM on your phone. Much more simply than the methods discussed above.
Click to expand...
Click to collapse
If the OP follows your instructions, he will have a brick.
Until the bootloader is unlocked. Attached is some mods to improve upon Jellybean.
Also, I urge people to bring any modifications(or test yourself) some of the mods in the Nexus 4 section that I can hopefully start transposing onto the LG Optimus Jellybean. I suggest if you're unsure if a mod will work. Ask me first, it's better to ask than brick your phone.
I'll make flashable zips and incorporate into lifeless eventually.
thermald-8064.conf
- Download file (this is NOT flashable)
- Extract the file
- Replace the extracted file with the same file in System/etc (Using Root Explorer or similiar)
- This improves the overheating issue based on the modified stock thermaconfig from ICS
Camera-Mod by _EPIC
- Same exact directions as above
- Excep replace the media_profiles with the media_profiles file attached.
More to come
Seems to be working thanks!
Sent from LG Optimus Prime G
Both work great, as always! :good:
Wifi Teather Root
Hello,
Hope this is the right forum, just recently updated to jelly bean LS970ZVB from this forum. Was able to retain root access; however lost my ability to use Wifi Tether for Root Users. Evidently FreeGee hasn't came up with a way to unlock the bootloader just yet after the update. Is there a way with this update to utilize free WIFI wireless tethering. I've looked around everywhere, and nothing has seemed to work. I have all green check marks on the log within the application. Please help!!!!:confused.
Maybe Sqlite will work with forcing entitlement changes; however , cant find this either.
tomclarke24 said:
Hello,
Hope this is the right forum, just recently updated to jelly bean LS970ZVB from this forum. Was able to retain root access; however lost my ability to use Wifi Tether for Root Users. Evidently FreeGee hasn't came up with a way to unlock the bootloader just yet after the update. Is there a way with this update to utilize free WIFI wireless tethering. I've looked around everywhere, and nothing has seemed to work. I have all green check marks on the log within the application. Please help!!!!:confused.
Maybe Sqlite will work with forcing entitlement changes; however , cant find this either.
Click to expand...
Click to collapse
See the thread that says [READ]?
Sent from my LG-LS970 using xda premium
Re: [READ] thread
_Epic said:
See the thread that says [READ]?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Thanks,for the direction I have placed the same question in the [discussion] thread from your direction. Please clarify if this question can be evaluated there, if not is there a link to where this has been brought up.
Thanks Again,
_Epic said:
See the thread that says [READ]?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
LMAO LOVE IT!!!!! So, about these mods, what exactly do they do? What should I be looking for??
Edit: The better question is HOW do they work? How do they do what they do? Im trying to learn...
Enzopreme said:
LMAO LOVE IT!!!!! So, about these mods, what exactly do they do? What should I be looking for??
Edit: The better question is HOW do they work? How do they do what they do? Im trying to learn...
Click to expand...
Click to collapse
The JB mods thread?
I didn't realize I was in this thread. The camera mod is one I made. It greatly improves camera and video. The thermal one helps with overheating.
Sent from my LG-LS970 using xda premium
tomclarke24 said:
Hello,
Hope this is the right forum, just recently updated to jelly bean LS970ZVB from this forum. Was able to retain root access; however lost my ability to use Wifi Tether for Root Users. Evidently FreeGee hasn't came up with a way to unlock the bootloader just yet after the update. Is there a way with this update to utilize free WIFI wireless tethering. I've looked around everywhere, and nothing has seemed to work. I have all green check marks on the log within the application. Please help!!!!:confused.
Maybe Sqlite will work with forcing entitlement changes; however , cant find this either.
Click to expand...
Click to collapse
Um, wifi tether works fine for me. Not sure why you need an unlocked bootloader to run wifi tether.
_Epic said:
The JB mods thread?
I didn't realize I was in this thread. The camera mod is one I made. It greatly improves camera and video. The thermal one helps with overheating.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
I really liked your camera mod for ics so I wanna give this a shot. I don't know where to put the XML file though. I don't see anything names camera_profiles. Does this replace something or just get dropped in somewhere. Thanks for your work. Sorry for my lack of smarts
bowhunt2005 said:
I really liked your camera mod for ics so I wanna give this a shot. I don't know where to put the XML file though. I don't see anything names camera_profiles. Does this replace something or just get dropped in somewhere. Thanks for your work. Sorry for my lack of smarts
Click to expand...
Click to collapse
Its media_profiles and you replace that file.
Sent from my LG-LS970 using xda premium
AdriVelazquez said:
Its media_profiles and you replace that file.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Drop in system/etc folder then overwrite
Sent from my LG-LS970 using xda premium
Didn't see that in the etc folder the first time. Anyway, I replaced it now. Thanks
I can't seem to DL the thermal zip correctly. It says it dl's but when I open it there is nothing in there. The cam mod zip worked fine.
Sent from my LG-LS970 using xda premium
Adri, the bootloader is unlocked, but the boot image that freegee has is for ics and therefore won't boot. If you just flash the recovery and aboot, you are unlocked, but can't debloat since the security error is fixed with the custom boot image. We haven't figured out how to fix it on jb hence the delay.
Sent from my LG-LS970 using xda app-developers app
This one sounded interesting. Wonder if there's a similar mod that would work for us:
http://forum.xda-developers.com/showthread.php?t=2028289
It changes the synaptic driver out to increase touch screen responsiveness.
Nothing else really comes to mind though.
There's a virtual CD ROM mod I saw floating around, but I would have to find it again.
Sent from my LG-LS970 using xda app-developers app
Shelnutt has updated freegee to properly work and boot for us (the jb boot image and stuff has been taken care of). Now that is out of the way and we are unlocked/rooted zvb, could you make flashable zips for the 2 mods? would love to try them out
thanks
Always look forward to you and Epics stuff.
thanks op!
AC!D Audio Engine V7.0 NOT working on ZVB
(Update) after installing just 2805, it's working.
I have installed AC!D Audio Engine V7.0 and can confirm it is working for me.
install at your own risk.
pre-requisites:
Rooted, unlocked, custom recovery
procedure:
Read the main AC!D Audio Engine V7.0 thread here
Go to the download and installation thread here
Download the 2805 build
Place it on your /sdcard
reboot into recovery
!!!!!!!DO A NANDROID BACKUP!!!!!!!
!!!!!!!DO A NANDROID BACKUP!!!!!!!
!!!!!!!DO A NANDROID BACKUP!!!!!!!
install 2805 build
!!!!!!!CLEAR DALVIK & CACHE!!!!!!!
reboot
test with music
Awesome!
Thanks for the mods, especially the thermal mod. Appreciate the work you did on lifeless especially working with the i-crap sandwich code you and the other devs had to deal with. Looking forward to your jb roms. Keep up the good work and thanks again to you and the rest of the devs! :good:
Lightly Tweaked Stock
Purpose of Rom
You may have noticed that this rom unlike others is essential all stock. I've done this for the people who want a clean rom to start their own development from or just like the complete stock experience without the hassle of Odin and rooting afterword.
Features
Based off UVMC6 (4.1.2)
Deodexed
Rooted with supersu
CM10 APN
Screenshots
UVMC6 Related Issues
If you don't use a radio based on a 4.1.2 rom you will get no signal bars and may experience frequent disconnects. If you're on a provider other then t-mobile like me you will be able to connect to your data network provider if cm10 supports it but you will need to disable wifi calling in the settings.
Flashing Instructions
Use Odin to get a custom recovery (Tested on TWRP 2.5)
Wipe System/Data/Cache/Davlik/Preload
Flash Rom
Reboot
Let sit for 10 minutes
Reboot agian
Enjoy!
Download
2.0
Dev-Host
Size: 446.91 MB
MD5 Sum: a41bc802c8a6719016cf816b6749f96c
1.0 (Play Store might not work)
Dev-Host
Size: 446.92 MB
MD5 Sum: e5686d16172b58d723cd1776a9851913
Tethering Addon
Dev-Host
Size: 12.55 MB
MD5 Sum: 1c0ddbbc8dabe9caf5904c14a98b0da4
(Also disables CIQ)
Mine...
Sent from my SAMSUNG-SGH-T989 using xda premium
Sigh
No offense, but this is not development, this belongs in general.
bseager said:
No offense, but this is not development, this belongs in general.
Click to expand...
Click to collapse
I don't think you can post a rom in General. This is the right place to put it.
Sent from my SGH-T989 using xda app-developers app
bseager said:
No offense, but this is not development, this belongs in general.
Click to expand...
Click to collapse
I think your lost lol... No offense
Please add a tethering mod in here.. Otherwise great for me
Sent from my GT-I9300 using Tapatalk 2
Exactly what I have been looking for (since my usb failed). Thanks!
Sent from my SGH-T989 using xda app-developers app
Hi, I gave a sgh-t989d as well..do you have any problems charging to 100% using your rom? Right now I using Koragg618's stock rom and my phone is only changing to 97/98%.
Nice job on this. Guys be sure to expect a multi view ROM from team necessity. Will be based on this ROM
Looks pretty wife friendly lol thanks
Sent from my SGH-T999 using xda app-developers app
bseager said:
No offense, but this is not development, this belongs in general.
Click to expand...
Click to collapse
Alarmmy said:
I don't think you can post a rom in General. This is the right place to put it.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Absolutely you can.
jahrule said:
I think your lost lol... No offense
Click to expand...
Click to collapse
Perhaps I am, what have you done here then development wise other than posting a rooted stock 4.1.2.? Seems like there are about 20 threads in this forum that already that cover this.
bseager said:
Absolutely you can.
Perhaps I am, what have you done here then development wise other than posting a rooted stock 4.1.2.? Seems like there are about 20 threads in this forum that already that cover this.
Click to expand...
Click to collapse
If you don't know what the difference is between this and the other 20 then flash it and see or STFU and GTFU! :good:
wifi tethering
if you want wifi thering on a stock rooted rom then try this. download wifi tether widget from play store and set up name and password. then go to system-apps and delete tetheringprovisions.apk. then create new apn. name it tether. then on apn line enter epc.tmobile.com or whatever is in the apn line for your provider. save it you dont have to set it as your apn. you should have wifi tethering now:good:
freeandroid4248 said:
Hi, I gave a sgh-t989d as well..do you have any problems charging to 100% using your rom? Right now I using Koragg618's stock rom and my phone is only changing to 97/98%.
Click to expand...
Click to collapse
I've never had any problem's charging to 100% with UVMC6, did you try wiping your caches and/or data? You could try to charge to 100% in a recovery or when the phone is off and reboot that way, it's unlikely it's a hardware issue but if it is that would let you know.
skinsfanbdh said:
if you want wifi thering on a stock rooted rom then try this. download wifi tether widget from play store and set up name and password. then go to system-apps and delete tetheringprovisions.apk. then create new apn. name it tether. then on apn line enter epc.tmobile.com or whatever is in the apn line for your provider. save it you dont have to set it as your apn. you should have wifi tethering now:good:
Click to expand...
Click to collapse
Tetheringpervision.apk is hard coded into the framework-res.apk. For it to successfully work you would also need to decompile the framwork-res.apk and navigate to red/values/array and remove the part about tetheringpervision. Then recompile the apk and push it to system/framework. if you need help let me know.
Also the APNs need to be unlocked or you won't be able to change it. Last there is a hidden APN for tethering, if it isn't removed you will never be able to connect.
Jamison904 said:
Tetheringpervision.apk is hard coded into the framework-res.apk. For it to successfully work you would also need to decompile the framwork-res.apk and navigate to red/values/array and remove the part about tetheringpervision. Then recompile the apk and push it to system/framework. if you need help let me know.
Also the APNs need to be unlocked or you won't be able to change it. Last there is a hidden APN for tethering, if it isn't removed you will never be able to connect.
Click to expand...
Click to collapse
There's also a good guide for t-mobile touchwiz roms here , I'm going to upload a flashable zip with the mod incorporated in a few mins.
This is exactly what I was looking for.
namanjr said:
I've never had any problem's charging to 100% with UVMC6, did you try wiping your caches and/or data? You could try to charge to 100% in a recovery or when the phone is off and reboot that way, it's unlikely it's a hardware issue but if it is that would let you know.
Click to expand...
Click to collapse
It never happened in ICS...hrmm...I just tried to install your rom to see if it would help, followed the directions you posted;
namanjr said:
Lightly Tweaked Stock
Flashing Instructions
Use Odin to get a custom recovery (Tested on TWRP 2.5)
Wipe System/Data/Cache/Davlik/Preload
Flash Rom
Reboot
Let sit for 10 minutes
Reboot agian
Enjoy!
Click to expand...
Click to collapse
But, I can't seem to find google play store after I boot, or reboot, what did I do wrong?
Never mind, I decided to go back to ICS via odin and wait for the official update from koodo.
namanjr said:
There's also a good guide for t-mobile touchwiz roms here , I'm going to upload a flashable zip with the mod incorporated in a few mins.
Click to expand...
Click to collapse
Yes Jovy is one of my buddies. He and I trade modifications all the time. Anyways, like I said if you need a hand let me know... or you can just grab mine. That is fine with me as well.
Great!
Has anyone managed to get a hotspot workaround running for 4.3 yet?
I'm liking the ROM on now, but I really need hotspot and it doesn't seem to work on any of the posted stock 4.3 ROMs out of the box.
Sent from my SGH-M919 using Tapatalk
asimons81 said:
Has anyone managed to get a hotspot workaround running for 4.3 yet?
I'm liking the ROM on now, but I really need hotspot and it doesn't seem to work on any of the posted stock 4.3 ROMs out of the box.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I flashed the hotspot mod for 4.2.2 and it works for me.
NiN39Z said:
I flashed the hotspot mod for 4.2.2 and it works for me.
Click to expand...
Click to collapse
Thank you! I'll check around for that then. Much appreciated!
On Jovys rom I posted a link with modified framework and files that will allow tethering if you are using the MK2 modems.
Tether/hotspot only seems to work on 4.2 roms tried 4.3 and 4.4 none works or seems to have no support at least nobody answer to this kind of issue
Sent from my SGH-M919 using XDA Premium 4 mobile app
TheArtiszan said:
On Jovys rom I posted a link with modified framework and files that will allow tethering if you are using the MK2 modems.
Click to expand...
Click to collapse
That is good to know. I will migrate my way over there and look for that. Now all I have to do is get smart on how to modify framework.
TheArtiszan said:
On Jovys rom I posted a link with modified framework and files that will allow tethering if you are using the MK2 modems.
Click to expand...
Click to collapse
The 2 xml files , where they go? I know framework where it is, but the other 2 file dont, can you point me in the right direction thank u
Sent from my SGH-M919 using xda app-developers app
asimons81 said:
Has anyone managed to get a hotspot workaround running for 4.3 yet?
I'm liking the ROM on now, but I really need hotspot and it doesn't seem to work on any of the posted stock 4.3 ROMs out of the box.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I'm using infamous v9 (4.3) and tethering works fine for me.. I'm still on the MDL baseband tho
Sent from my SGH-M919 using XDA Premium 4 mobile app
Nivle said:
The 2 xml files , where they go? I know framework where it is, but the other 2 file dont, can you point me in the right direction thank u
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
They go under /system/csc folder
You should be able to just overwrite the two that are there.
I typically delete thme out and then write the new ones and change permissions.
Reboot and it will read the new files.
Thank u, using without a problem in Jovys23 4.3 stock rom
Sent from my SGH-M919 using xda app-developers app
That's great news.
Feel free to hit the thanks button if it worked for you too.
asimons81 said:
Has anyone managed to get a hotspot workaround running for 4.3 yet?
I'm liking the ROM on now, but I really need hotspot and it doesn't seem to work on any of the posted stock 4.3 ROMs out of the box.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
KitKat carbon got it must use David instead of ART
Sent from my SGH-M919 using XDA Premium 4 mobile app
melqui2004 said:
KitKat carbon got it must use David instead of ART
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not David sorry is Dalvik
Sent from my SGH-M919 using XDA Premium 4 mobile app
where's the link to those files?
does anyone have a link to those framework files for hotspot tethering with the mk2 baseband?
Framework Files
Hello Agelistus,
the files you can find them on this thread http://forum.xda-developers.com/showthread.php?p=47983804&highlight=tether#post47983804
It will be Post #225
I didn't copy the direct URL as I don't own the link of files. Would be glad to post them here if TheArtiszan is ok with that or re-upload them to make them available in more than one spot.
agelistus said:
does anyone have a link to those framework files for hotspot tethering with the mk2 baseband?
Click to expand...
Click to collapse
Much obliged!!
Hey southsidexz, thanks a million!! xda is an entire universe of information and I would have truly burned the midnight oil looking for this to no avail. Gonna try it out now. So far that's my only issue with infamous 9, it seemed that wifi tethering worked natively on 8.0. Again, many many thanks!
Your welcome
Your welcome. Always glad to help people around.
On another note I was dumb enough to rename the framework to old before I replaced it so my Phone got killed..... However thanks to cabloomi and his Recovery Image to .tar.md5 odin flash, I was able to flash CWM latest recovery so it could read my MicroSD card and then flash the zip I created that flashed the framework file. (Thanks to ScatteredHell)
If in case someone else does it... and doesn't want to re-flash the rom or restore old backup.
You can flash Framework via recovery, following this thread instrucitons to get the framework apk into a flashable format for recovery:
http://forum.xda-developers.com/showthread.php?t=1840098
If in case you have a recovery that won't read your external SD card (like I did) you can use this link to flash any recovery via ODIN.
http://forum.xda-developers.com/showthread.php?t=2281287
(Side Note: if you get errors, please see post #23 on the link above, it provides the solution if you get errors)
Note:I am not responsible for damaging or further damaging your phone, I am just providing help/alternate solutions. Your phone is your responsibility
I follow the steps above and got back up running.
agelistus said:
Hey southsidexz, thanks a million!! xda is an entire universe of information and I would have truly burned the midnight oil looking for this to no avail. Gonna try it out now. So far that's my only issue with infamous 9, it seemed that wifi tethering worked natively on 8.0. Again, many many thanks!
Click to expand...
Click to collapse
Just to make this easy I had the same problem on replacing framework, too. Then I searched on some other forums here and found out you can copy or move the framework apk into system folder and fix permissions then move that framework I to the framework folder to replace over the existing apk and just reboot. Just make sure to make a nandroid before doing anything just incase something goes wrong.
Thanks
Thanks Carlos2200,
I would've taken that route but sadly I couldn't get into the system folder. I wasn't able to do a nandroid restore as my SD card got messed up and the backup was gone.
Definitely for anyone, make sure you have a good Nandroid before anything.
I will update that the method I mention above does remove all your accounts only. So you will have to re-add them.
Carlos2200 said:
Just to make this easy I had the same problem on replacing framework, too. Then I searched on some other forums here and found out you can copy or move the framework apk into system folder and fix permissions then move that framework I to the framework folder to replace over the existing apk and just reboot. Just make sure to make a nandroid before doing anything just incase something goes wrong.
Click to expand...
Click to collapse
An alternative....
For those who don't care to bother with the framework files in the event that 3minit is updated to work with 4.3, I came across an app on the play store called "wi-fi tether router" that seems to work, though I haven't a clue why it does. Changing the user agent on the browser renders it successful it seems. Good luck to all!
Sprint Diagnostics AppEasy Method for MSLChange PRL on the Fly
Discalaimer: All features do not work but for our intent, this is a SUPER easy way to acquire MSL and write PRL files.
Cheers - TD
Prerequisites:
Touchwiz Rom
Your phone must be rooted and deodexed!
Signature verification may need to be disabled. If you do not see the app in your app drawer, please pull and post the services.jar file from system/framework.
Please include build and phone info and I will modify the file and resend it to you.
Installation:
Flash this in recovery.
Usage:
Getting your MSL code - in the app select Get MSL Code!
Write custom PRL - place .prl file(s) on internal SD, select PRL Manager then Write PRL. This will bring up a list of available prl files on SD for you to choose from.
Note: Not all of the features listed in the app work for the Galaxy SIII.
Does this app work for cm roms or just tw thanks
Sent from my SPH-L900 using Tapatalk
sliverr7x said:
Does this app work for cm roms or just tw thanks
Click to expand...
Click to collapse
This is confirmed working on Touchwiz but please test with CM and also someone test with AOSP and let me know and I can update OP.
I'm running pac man rom and it also fc on me but that doesn't me it won't work on all aosp cm rom
Sent from my SPH-L900 using Tapatalk
---------- Post added at 07:57 AM ---------- Previous post was at 07:56 AM ----------
Forgot u think it will work for note2
Sent from my SPH-L900 using Tapatalk
sliverr7x said:
I'm running pac man rom and it also fc on me but that doesn't me it won't work on all aosp cm rom
Sent from my SPH-L900 using Tapatalk
---------- Post added at 07:57 AM ---------- Previous post was at 07:56 AM ----------
Forgot u think it will work for note2
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
Thanks for trying. There is a file dependence that is required. If the file is missing the app won't even launch.
For the Note2, yes it should work on quite a few Touchwiz devices but the PRL write feature may not. It should least acquire MSL though.
The only issue I've noticed is that acquiring MSL does not work on all carriers.
Thanks I'll keep trying at least Ill have it when I go back to tw pretty sweet app I'm on sprint also
Sent from my SPH-L900 using Tapatalk
stupid question.
I flashed the sprint diagnostics app and I can't find it in my apps list. The app flashed successfully
where does it go?
I'm using a note3.. that may be the issue?
thanks
itster2 said:
stupid question.
I flashed the sprint diagnostics app and I can't find it in my apps list. The app flashed successfully
where does it go?
I'm using a note3.. that may be the issue?
thanks
Click to expand...
Click to collapse
Pull your services.jar from system/framework (or extract it from your rom.zip).
I use root explorer built into Rom Toolbox, navigate to system/framework and copy and paste services.jar to SDcard.
Zip it up and post it here and I will modify the jar file so signature verification is removed and send it back to you in flashable form.
Edit: And you're on a Touchwiz rom correct? This is for Touchwiz only.
tdunham said:
Pull your services.jar from system/framework (or extract it from your rom.zip).
I use root explorer built into Rom Toolbox, navigate to system/framework and copy and paste services.jar to SDcard.
Zip it up and post it here and I will modify the jar file so signature verification is removed and send it back to you in flashable form.
Edit: And you're on a Touchwiz rom correct? This is for Touchwiz only.
Click to expand...
Click to collapse
here you go
thanks!
itster2 said:
here you go
thanks!
Click to expand...
Click to collapse
Got it. Also, what Note 3 build or rom is this from so I may label it appropriately in case someone else wishes to use it?
tdunham said:
Got it. Also, what Note 3 build or rom is this from so I may label it appropriately in case someone else wishes to use it?
Click to expand...
Click to collapse
Minin3 5.0 version
tdunham said:
Got it. Also, what Note 3 build or rom is this from so I may label it appropriately in case someone else wishes to use it?
Click to expand...
Click to collapse
Here you go:
Note 3 Minin3.v5.0 modified services.jar and just in case the stock services from the one you sent me just case.
Just flash in recovery.
For Wicked Sensations Rom v0.4 signature verification check removed.
Flash attached file in recovery.
tdunham said:
Here you go:
Note 3 Minin3.v5.0 modified services.jar and just in case the stock services from the one you sent me just case.
Just flash in recovery.
Click to expand...
Click to collapse
This should be good for any note 3 Rom?
ImEVO said:
This should be good for any note 3 Rom?
Click to expand...
Click to collapse
I can't say. That is why I posted a specific jar for that users build.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Awesome!
Been procrastinating flashing my second S3 to Cricket and this made getting the MSL so much easier...Think I'll flash over today! The only other ways I knew involved downgrading to a ROM below 4.1.2 and using the Get My MSL app or buying CDMA Workshop (which is just north of 100 bucks.) Had the MSL in less than 5 minutes total with this method. Thanks!
https://www.dropbox.com/s/kvqi3e51ie1fnbo/services.jar
jdsingles76 stock rooted rom MK5 boost mobile
mholloway said:
https://www.dropbox.com/s/kvqi3e51ie1fnbo/services.jar
jdsingles76 stock rooted rom MK5 boost mobile
Click to expand...
Click to collapse
Here you go.
Modified services.jar for this rom:
[ROM][MK5][STOCK][ODEXED/DEODEXED]- Virgin Mobile/Boost Mobile
tdunham said:
Here you go.
Modified services.jar for this rom:
[ROM][MK5][STOCK][ODEXED/DEODEXED]- Virgin Mobile/Boost Mobile
Click to expand...
Click to collapse
Yes you are awesome TD., that worked.thank you....by the way what rom are you running If any?
mholloway said:
Yes you are awesome TD., that worked.thank you....by the way what rom are you running If any?
Click to expand...
Click to collapse
I switch between MOAR and Wicked Sensations, both great roms.