Hello, I recently flashed TWRP onto my V with the toolkit in the sticky thread, however I can no longer install system updates, it just boots into TWRP. Can anybody advise me on what to do next?
Kind Regards.
NocturnalDroid said:
Hello, I recently flashed TWRP onto my V with the toolkit in the sticky thread, however I can no longer install system updates, it just boots into TWRP. Can anybody advise me on what to do next?
Kind Regards.
Click to expand...
Click to collapse
system updated only work woth stock recovery. i think you can flash the stock recovery, take the update, then go back with twrp
Thanks for your help, but I decided to flash over a custom ROM anyway, which is already updated to 4.0.4 and sense 4.1
You realize there are much better versions of Android beyond 4.0.4 available for the one V don't you? Cm 10.1 is currently at 4.2.2 and the latest fully working PACman rom (v19.3) is at 4.1.2, just to name a couple.
Sent from my HTC One V running PACman v19.3
Related
Hello group,
I just finished rooting my samsung galaxy s3 sgh1747m using the odin method.. I have all the titanium backups except media. I have 2 surperuser prgs installed and also Rom Manager.
I just reset my counter using triangleaway.290 on a custom rom.. I am running also clockwork mod recovery 5..5. .0 4
my question is...
How do get the latest Jelly Bean Updates on to my phone.. with modified status..
(i am using jb 4.1.1 right now)
baseband i747mvldlk4
Also how do i get the latest recovery clockwork recovery file
any help would be apprieciated//
HolydiverWpg
do not double post.
you are currently ON the latest stock firmware for your device. are you wanting to install a custom ROM to get a newer (4.2.2) release?
you can use Rom Manager to update your recovery. once thats done, if you havent done so yet, boot into recovery and make a nandroid (backup). you may need it down the road.
yes!
Yes I want to know how i can update my 4.1.1 once the newer Jelly Bean 4.2.2 update is available.
i have made a nandroid back and i also made a titantiam backup..
is there a newer version of CWM for my phone??rom manager says no.
xBeerdroiDx said:
do not double post.
you are currently ON the latest stock firmware for your device. are you wanting to install a custom ROM to get a newer (4.2.2) release?
you can use Rom Manager to update your recovery. once thats done, if you havent done so yet, boot into recovery and make a nandroid (backup). you may need it down the road.
Click to expand...
Click to collapse
The 4.2.2 custom roms are located in the Original Android Development section. There is no 4.2.2 update from samsung. Look them over and read up on the flashing process. The link in my signature has some good information.
I have rooted my gs3 and need help. I am on stock rooted 4.0.4 ics. I want to go to the latest pacman rom. What do I need to do?
Have you installed a recovery?
Download GooManager if you want TWRP or ROM Manager if you want CWM recovery.
Either one will allow you to flash a compatible ROM.
I really like TWRP. User interface is easy. Goo.im app makes it easy to find compatible ROMS to flash for your device. I don't know if PACMAN is on goo, tho.
jamescable said:
I have rooted my gs3 and need help. I am on stock rooted 4.0.4 ics. I want to go to the latest pacman rom. What do I need to do?
Click to expand...
Click to collapse
If you are on stock ics you'll most likely need to update your bootloader after you update your recovery if it isn't updated already.
You'll need to go here
http://forum.xda-developers.com/showthread.php?t=2321310
This will need to be done before you flash almost any rom that's been updated in the last couple weeks.
You might be up to date but I doubt it.
Sent from my SGH-I747 using xda app-developers app
Definitely go with TWRP. The user interface is much friendlier than CWM. It is also really good from the standpoint of being careful when wiping or installing things with their "slide to ____" feature.
So a couple of days ago I got a GS3 running the OTA stock 4.3. I wasn't sure if I wanted to use it because I find Touch Wiz kind of clunky. So I decided I would try out Cyanogenmod. I installed it via their new handy installer (as the sprint GS3 is one of the compatible devices). All went well and I got Cyanogenmod 10.2 running smoothly. Now I want to activate the device, but apparently you can't activate a rooted device on sprint. So now i need to get it back to stock 4.3 and I can only seem to find solutions to his problem for devices that have not gotten the 4.3 OTA update and are still running 4.1.2. On the Cyanogenmod installer guide says:
You may perform a full backup from recovery, after flashing recovery (you will have to do this manually, at the moment) and then copy it off the device, if you don't have an external sdcard. If you've already run the installer, you will have to find stock images and flash them using fastboot or Odin.
Click to expand...
Click to collapse
My problem Is I can't locate any stock 4.3 images with which to try this. If I can get my hands on a stock 4.3 image, would the process be just going into the bootloader and using Odin to flash the 4.3 image?
Can anyone help me out?
You only need to be on a stock tw rom, even if you are rooted it should activate. There are a couple in the development section.
metalfan78 said:
You only need to be on a stock tw rom, even if you are rooted it should activate. There are a couple in the development section.
Click to expand...
Click to collapse
I see, do you know of any any good 4.3 based tw roms? All the ones I'm finding are based on 4.1. Also, do I need to do anything special to flash from Cyanogenmod 10.2 to a touchwiz rom (as Cyanogenmod is AOSP)? I already have ClockworkMod recovery installed.
Nothing special, flash like anything else
http://forum.xda-developers.com/showthread.php?t=2541900
[STOCK ROM] Stock 4.3 MK3 ROM [ROOTED/UNROOTED]
I just rooted my AT&T Galaxy S3
Specs:
Model number: SAMSUNG-SGH-I747
Android Verson: 4.3
I am trying to install the AOKP Rom for my device. I have it all downloaded and know how to install it but I keep getting Status error 7. What is happening? I read a little online and it says this error is for whenever you have the incorrect ROM version? Please help!!
Install the latest cwm onto your phone and flash from recovery mode.
audit13 said:
Install the latest cwm onto your phone and flash from recovery mode.
Click to expand...
Click to collapse
How do I do that?
Check page 3 in the Android development section.
BammS2 said:
Check page 3 in the Android development section.
Click to expand...
Click to collapse
That doesnt help at all /:
Originally Posted by BammS2
Check page 3 in the Android development section.
Click to expand...
Click to collapse
That doesnt help at all /:
Click to expand...
Click to collapse
If you already have a custom recovery CWM then just find the most up to date version of it. You obviously installed once already. Also are you referring to stock 4.3?
Sent from my Awesome Phone using xda app-developers app
Also getting Status 7 error
I had TWRP installed (whatever ver comes with toolbox app)
Read reply, and installed latest version of CWM Touch from: http://forum.xda-developers.com/showthread.php?t=2152769
Still getting Status 7 on two different ROMs.
Now, I had been on 4.1.1, rooted and flashed a custom ROM no problem
Had some problems with my TMO service (I have another thread in this forum) and ended up doing an ODIN flash back to stock (4.0.4)
Which I have now sitting at stock, rooted. Is it possible that I'm getting the status 7 because both of the ROM's I'm attempting to flash are 4.4.2 and that is too big of a leap from 4.0.4? I'm going to grab a 4.1.x rom now to see if any different, but wanted to share history and that I was getting same error
The easiest way for me to get 4.4.2 onto an s3 was this:
1) copy a custom rom to your sd card (internal or external)
2) use Odin to flash back to any stock rom for your phone;
3) use Odin to install the latest version of Philz Touch Recovery from here (get the tar version and flash in PDA): http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att;
4) update to the most recent non-4.3 bootloader: http://forum.xda-developers.com/showthread.php?t=2321310
5) do a full wipe in recovery;
6) flash a custom 4.4.2-based ROM from recovery.
dannymac77 said:
I had TWRP installed (whatever ver comes with toolbox app)
Read reply, and installed latest version of CWM Touch from: http://forum.xda-developers.com/showthread.php?t=2152769
Still getting Status 7 on two different ROMs.
Now, I had been on 4.1.1, rooted and flashed a custom ROM no problem
Had some problems with my TMO service (I have another thread in this forum) and ended up doing an ODIN flash back to stock (4.0.4)
Which I have now sitting at stock, rooted. Is it possible that I'm getting the status 7 because both of the ROM's I'm attempting to flash are 4.4.2 and that is too big of a leap from 4.0.4? I'm going to grab a 4.1.x rom now to see if any different, but wanted to share history and that I was getting same error
Click to expand...
Click to collapse
Your main problem is that you need an updated bootloader. Please read up on this as it has been covered in great and very extensive detail throughout these forums. One bootloader will cause you to no longer to be capable of using ODIN to flash back to any stock based ROM without bricking your phone so you need to be careful.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Read more and you will see that cwm recovery is highly recommended for flashing 4.4.2 roms. Some roms dont flash good with twrp.
Hey guys ive gitten up to the point now where im rooted running cwms latest touch recovery. I need to upgrade my bootloader in order to flash any 4.3+ roms. Can someone help me with this process. Can I just flash the latest bootloader or can I flash a rooted 4.3 rom and flash the new bootloader after? Kinda stuck at the moment with the stock rooted 4.1.2 rom running latest cwm touch recovery.
pmb1903 said:
Hey guys ive gitten up to the point now where im rooted running cwms latest touch recovery. I need to upgrade my bootloader in order to flash any 4.3+ roms. Can someone help me with this process. Can I just flash the latest bootloader or can I flash a rooted 4.3 rom and flash the new bootloader after? Kinda stuck at the moment with the stock rooted 4.1.2 rom running latest cwm touch recovery.
Click to expand...
Click to collapse
I posted a link to help you in your other post
The link you posted leads to a rom thread. Is there something specific in there I should be looking for. The one you lead me to talks of downgrading not upgrading