Related
I was trying to install one of drewgarens touchwiz roms. touchwiz milestone 5 firefly i believe. not the most recent one because i was too lazy . boy was that a mistake. everything was going smoothly until it booted and it got stuck on boot. I thought no big deal just go into recovery and use a backup. until i did so and recovery was gone and there was only download mode. I have spent the whole afternoon trying to fix it and none of it has worked. I tried flashing the stock rom and it as well got stuck on boot. I looked at all the AT&t relevant ones and also the international versions. so all in all is there anyway to fix this and has anyone had the same issue? i was flashing from cyanogenmod 10 m1 to the drewgaren rom btw. I can also go to download mode. I tried to flash stock but it still gets stuck on boot. log. I flashed the ATT boot logo and it did not work. all of which were flashed through odin.
any thanks in advance is greatly appreciated.
I think you can flash back to stock with just download mode + odin
Randomacts said:
I think you can flash back to stock with just download mode + odin
Click to expand...
Click to collapse
I already tried that. It still get stuck on the Boot logo
stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
I can't help you but I wish you luck.
stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
Unplug your device. Hold the power button to turn it off. Hold volume up, home, and power. It should go to recovery. If you do the same thing with volume down instead of up, you can get into download mode.
Sent from my SAMSUNG-SGH-I747 using xda premium
Sounds like you need a recovery...try this
http://forum.xda-developers.com/showthread.php?t=1746665
[SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3] Drivers Backup Root CWM BusyBox + MORE [ATT]
Follow the instructions and you should be able to flash the recovery and continue on with what you were doing. Remember to wipe really good when going from aosp back to any stock based ROM. They are completely different and will cause boot loops if you don't wipe.
jethro650 said:
Sounds like you need a recovery...try this
http://forum.xda-developers.com/showthread.php?t=1746665
[SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3] Drivers Backup Root CWM BusyBox + MORE [ATT]
Follow the instructions and you should be able to flash the recovery and continue on with what you were doing. Remember to wipe really good when going from aosp back to any stock based ROM. They are completely different and will cause boot loops if you don't wipe.
Click to expand...
Click to collapse
I cannot enable usb debugging
Crap...there are Odin flashable versions of cwm floating around you'll need to find one of those. If you haven't found one I'll post one up when I get home.
jethro650 said:
Crap...there are Odin flashable versions of cwm floating around you'll need to find one of those. If you haven't found one I'll post one up when I get home.
Click to expand...
Click to collapse
K I made it home lol. I'll attach a Odin flashable cwm, it's an older one but it'll get you a recovery, I hope. I just tried it on my phone with Odin, 3.07 both with usb debugging enabled and disabled on my phone and it worked both times. Crap keep getting errors uploading right to xda servers, I'll drop box it in a minute.
Ok here we go Odin cwm--> https://dl.dropbox.com/u/28590257/Odin recovery/CWM-Recovery-LTE-SGS3-v4.tar.md5
Newest twrp --> https://dl.dropbox.com/u/28590257/Odin recovery/twrp2.3.1install.zip
I'll add the newest twrp for you lol. Flash the cwm with odin, should work and then the twrp is a zip you can flash in cwm.
Hope this helps get you a recovery.
Remember in Odin use only PDA and only have auto reboot checked.
jethro650 said:
K I made it home lol. I'll attach a Odin flashable cwm, it's an older one but it'll get you a recovery, I hope. I just tried it on my phone with Odin, 3.07 both with usb debugging enabled and disabled on my phone and it worked both times. Crap keep getting errors uploading right to xda servers, I'll drop box it in a minute.
I'll add the newest twrp for you lol. Flash the cwm with odin, should work and then the twrp is a zip you can flash in cwm.
Hope this helps get you a recovery.
Remember in Odin use only PDA and only have auto reboot checked.
Click to expand...
Click to collapse
This may sound like a stupid question but what boxes do i tick in odin?
After your hooked up and Odin is open under the options on the left side check only Auto Reboot. On the right under files check PDA and use that button to browse your computer and find the cwm you downloaded from my dropbox. Then just hit start on the bottom of the Odin window and let it finish, your phone should reboot when its done. It will get stuck again like you described in your first post but pull the battery, put it back in and boot into recovery using vol up,home and power buttons. That should (if everything flashed OK) put you into cwm 5.5.0.4. Once there wipe data/factory reset then restore the back up you mentioned in your original post, that should get you running again.
---------- Post added at 06:05 PM ---------- Previous post was at 05:55 PM ----------
If something has happened to your backup then you could try the stock rooted stuff here , just pick the one for your carrier and follow the instructions. :highfive:
jethro650 said:
After your hooked up and Odin is open under the options on the left side check only Auto Reboot. On the right under files check PDA and use that button to browse your computer and find the cwm you downloaded from my dropbox. Then just hit start on the bottom of the Odin window and let it finish, your phone should reboot when its done. It will get stuck again like you described in your first post but pull the battery, put it back in and boot into recovery using vol up,home and power buttons. That should (if everything flashed OK) put you into cwm 5.5.0.4. Once there wipe data/factory reset then restore the back up you mentioned in your original post, that should get you running again.
---------- Post added at 06:05 PM ---------- Previous post was at 05:55 PM ----------
If something has happened to your backup then you could try the stock rooted stuff here , just pick the one for your carrier and follow the instructions. :highfive:
Click to expand...
Click to collapse
I was able to get it into recovery but i realized i did not have my sd card in so i turned it off and put my sd card in. unfortunately i was not able to get it back into recovery i tried flashing it again with the sd card in and no luck
That's odd. Couple of stupid questions on my part just to make sure, you had the right button combo, and, you released the buttons soon as the splash screen came on? Can you still get into download mode? Oh and did you do the wipes while in recovery?
jethro650 said:
That's odd. Couple of stupid questions on my part just to make sure, you had the right button combo, and, you released the buttons soon as the splash screen came on? Can you still get into download mode? Oh and did you do the wipes while in recovery?
Click to expand...
Click to collapse
oh my gosh THANK YOU SOOOMUCH. I was worried i would have to take it to at&t ill be sure to press the thanks button.
I take it you got your phone working lol. Glad I could help a little. Little advice, anytime you switch to a different type of ROM (aosp to stock based or the other way around) make sure you wipe data/factory reset before flashing anything. It will save you problems in the long run.
Oh and could you go back and edit your original post and just add solved in brackets to the title for people in trouble looking for info.
stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
Depending on which stock ROM you flashed with odin you should now have a recovery, if not then something isn't right. The full bone stock ROM should have the factory 3e recovery, and the root injected stock ROM should have some version of CWM recovery. A factory reset will most likely fix your boot loop, if there is no recovery flash the rooted stock ROM that matches your device from this guide.
Edit - Didn't see there was a second page 0_o
I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!
No recovery stuck on bootloop
im having the same issue could you post that dropbox link again
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?
louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse
hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse
rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help
yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).
Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it
ok, I'm not sure if i'm posting in the right place, but if not, I'll just have to get some crap about that. I have a note 2 and the 4.3 update was draining my battery faster than was acceptable, so i rooted and flashed cm11 to it. I didn't like cm11 after a few days, so i went to try to return to 4.2.
every time i'd try, there would be either an error extracting the files to my computer or it would fail in odin. i finally got tired of trying and decided to go back to the stock firmware and was going to update back to the current official firmware. i thought it had unrooted, and i got the stock firmware working, but when i went to update back to 4.3, it failed and is now stuck on the "samsung galaxy note II" screen when i turn it on. I can get it into download mode, and i try to reflash various roms hoping something will work at this point, but nothing does. odin says it's successful, but it stays on that same screen when i turn it on.
the only thing i can think of is that i forgot to do a data wipe or clear the cache at some point in trying to get back and forth between roms? the problem is that i can't get back into recovery mode, AT ALL. I've tried every combination of the volume up, down, home and power buttons. I've tried holding all the buttons and plugging in the usb cable, EVERYTHING.
i've searched everywhere on xda and tried all of it, multiple times. I saw a thread about a flashable rom that included a data wipe, but it was for a completely different phone, so i left the thread to search for a compatible option like that. i've rooted a few other phones in the past with success, and failure, but none that couldn't be overcome.
Can anyone help? Please!!
This method worked for me.
One click Odin AT&T 4.3 update Note2 -> http://forum.xda-developers.com/showthread.php?t=2496292
Direct download link from above --> http://forum.xda-developers.com/showthread.php?t=2496292&page=23
Youtube video with instructions -->https://www.youtube.com/watch?v=zwUdd_SkzSQ
CF Auto Root -> http://forum.xda-developers.com/showthread.php?t=1980644
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
ShrekOpher said:
This method worked for me.
One click Odin AT&T 4.3 update Note2 -> http://forum.xda-developers.com/showthread.php?t=2496292
Direct download link from above --> http://forum.xda-developers.com/showthread.php?t=2496292&page=23
Youtube video with instructions -->https://www.youtube.com/watch?v=zwUdd_SkzSQ
CF Auto Root -> http://forum.xda-developers.com/showthread.php?t=1980644
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
thanks, I'm downloading it now. How does Heimdall differ from Odin, I've never used it.
craig.hagler said:
ok, I'm not sure if i'm posting in the right place, but if not, I'll just have to get some crap about that. I have a note 2 and the 4.3 update was draining my battery faster than was acceptable, so i rooted and flashed cm11 to it. I didn't like cm11 after a few days, so i went to try to return to 4.2.
every time i'd try, there would be either an error extracting the files to my computer or it would fail in odin. i finally got tired of trying and decided to go back to the stock firmware and was going to update back to the current official firmware. i thought it had unrooted, and i got the stock firmware working, but when i went to update back to 4.3, it failed and is now stuck on the "samsung galaxy note II" screen when i turn it on. I can get it into download mode, and i try to reflash various roms hoping something will work at this point, but nothing does. odin says it's successful, but it stays on that same screen when i turn it on.
the only thing i can think of is that i forgot to do a data wipe or clear the cache at some point in trying to get back and forth between roms? the problem is that i can't get back into recovery mode, AT ALL. I've tried every combination of the volume up, down, home and power buttons. I've tried holding all the buttons and plugging in the usb cable, EVERYTHING.
i've searched everywhere on xda and tried all of it, multiple times. I saw a thread about a flashable rom that included a data wipe, but it was for a completely different phone, so i left the thread to search for a compatible option like that. i've rooted a few other phones in the past with success, and failure, but none that couldn't be overcome.
Can anyone help? Please!!
Click to expand...
Click to collapse
Ok, I don't think it will work as your bootloader are updated to 4.3 version and since you are trying to go back on 4.2 may be that ROM is trying to flash 4.2 bootloaders.
A_youu said:
Ok, I don't think it will work as your bootloader are updated to 4.3 version and since you are trying to go back on 4.2 may be that ROM is trying to flash 4.2 bootloaders.
Click to expand...
Click to collapse
i'm really just trying to get to anything that works at this point, if it's 4.3, that's fine.
craig.hagler said:
i'm really just trying to get to anything that works at this point, if it's 4.3, that's fine.
Click to expand...
Click to collapse
Yes, I think Stock 4.3 will work...Go in download mode and flash 4.3 stock rom from here.
http://forum.xda-developers.com/showthread.php?t=2589891
Also, you can find 4.3 bootloaders in above thread. (just make sure that you dont flash "AT&T i317 ODIN 4.3 UCUBMJ4 (Leak) Bootloader & TZ (AT&T Note 2 ONLY)" as these bootloaders are only for 4.3 Leaked version. But since you were on STOCK 4.3, therefore don't flash this bootloader.
I will suggest not to try ROM which ShrekOpher provided as that ROM is leaked 4.3 ROM and has different Bootloader.
---------- Post added at 04:40 PM ---------- Previous post was at 04:34 PM ----------
A_youu said:
Yes, I think Stock 4.3 will work...Go in download mode and flash 4.3 stock rom from here.
http://forum.xda-developers.com/showthread.php?t=2589891
Also, you can find 4.3 bootloaders in above thread. (just make sure that you dont flash "AT&T i317 ODIN 4.3 UCUBMJ4 (Leak) Bootloader & TZ (AT&T Note 2 ONLY)" as these bootloaders are only for 4.3 Leaked version. But since you were on STOCK 4.3, therefore don't flash this bootloader.
I will suggest not to try ROM which ShrekOpher provided as that ROM is leaked 4.3 ROM and has different Bootloader.
Click to expand...
Click to collapse
You can also try this before flashing any ROM and see if this fix problem for you -
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
A_youu said:
Yes, I think Stock 4.3 will work...Go in download mode and flash 4.3 stock rom from here.
http://forum.xda-developers.com/showthread.php?t=2589891
Also, you can find 4.3 bootloaders in above thread. (just make sure that you dont flash "AT&T i317 ODIN 4.3 UCUBMJ4 (Leak) Bootloader & TZ (AT&T Note 2 ONLY)" as these bootloaders are only for 4.3 Leaked version. But since you were on STOCK 4.3, therefore don't flash this bootloader.
I will suggest not to try ROM which ShrekOpher provided as that ROM is leaked 4.3 ROM and has different Bootloader.
---------- Post added at 04:40 PM ---------- Previous post was at 04:34 PM ----------
You can also try this before flashing any ROM and see if this fix problem for you -
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
Click to expand...
Click to collapse
that's part of the problem, i can't get into recovery mode, so i can't flash any roms at all right now
and i've actually tried that thread you linked. i can't unzip the cwm files and i cant get to recovery mode to flash anything
craig.hagler said:
that's part of the problem, i can't get into recovery mode, so i can't flash any roms at all right now
and i've actually tried that thread you linked. i can't unzip the cwm files and i cant get to recovery mode to flash anything
Click to expand...
Click to collapse
In that thread you can also find ROM for Odin. Try installing that ROM via Odin
A_youu said:
In that thread you can also find ROM for Odin. Try installing that ROM via Odin
Click to expand...
Click to collapse
ive flashed with odin many times with many roms, but nothing is working. it still freezes at the "samsung galaxy note 2" screen. i've tried stock roms, custom roms, and i've even tried doing an emergency firmware install through samsung kies. i can get to download mode, but not recovery mode.
Also, for some reason, my computer is saying many of the zip files are damaged or can't be opened for some reason. I've tried winace, bitzipper, and 7zip, and it does the same on all of them for some of the files. that's what it said for all of the files on that link any idea of a way around it?
craig.hagler said:
Also, for some reason, my computer is saying many of the zip files are damaged or can't be opened for some reason. I've tried winace, bitzipper, and 7zip, and it does the same on all of them for some of the files. that's what it said for all of the files on that link any idea of a way around it?
Click to expand...
Click to collapse
You can try to root it by flashing CWM via Odin and then if you can get into recovery mode try to do Factory Reset and reboot. Hopefully this will solve your problem. If Factory reset don't solve your problem then you can flash new room from recovery mode.
A_youu said:
You can try to root it by flashing CWM via Odin and then if you can get into recovery mode try to do Factory Reset and reboot. Hopefully this will solve your problem. If Factory reset don't solve your problem then you can flash new room from recovery mode.
Click to expand...
Click to collapse
i can't get into recovery mode to flash any roms or do a factory reset that's my issue. is there a way to get into recovery mode if the phone won't boot up and the three button way isn't working?
craig.hagler said:
i can't get into recovery mode to flash any roms or do a factory reset that's my issue. is there a way to get into recovery mode if the phone won't boot up and the three button way isn't working?
Click to expand...
Click to collapse
You can go into download mode, right? So, I am saying that instead of flashing ROM from Odin. Try to Flash CWM via Odin and then try to put your phone into recovery mode...
A_youu said:
You can go into download mode, right? So, I am saying that instead of flashing ROM from Odin. Try to Flash CWM via Odin and then try to put your phone into recovery mode...
Click to expand...
Click to collapse
how do i flash cwm? what do i put in what spot in odin? still in the pda spot?
craig.hagler said:
how do i flash cwm? what do i put in what spot in odin? still in the pda spot?
Click to expand...
Click to collapse
and why would it keep saying the files are damaged? is it something with my computer, or the file, or the extracting program?
craig.hagler said:
how do i flash cwm? what do i put in what spot in odin? still in the pda spot?
Click to expand...
Click to collapse
Here, you can try to follow these steps and see if helps you.
http://forum.xda-developers.com/showthread.php?t=1980644
Follow top 3 posts at above link. You can find "SGH-I317: CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.zip" in 3rd post and instructions in 2nd post to flash it through Odin.
A_youu said:
Here, you can try to follow these steps and see if helps you.
http://forum.xda-developers.com/showthread.php?t=1980644
Follow top 3 posts at above link. You can find "SGH-I317: CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.zip" in 3rd post and instructions in 2nd post to flash it through Odin.
Click to expand...
Click to collapse
that's actually the exact one i used to root my phone originally. it worked then, but it isn't working now. it will work in odin, and says it passes, but when i try to boot or get into recovery mode, it won't do it
craig.hagler said:
that's actually the exact one i used to root my phone originally. it worked then, but it isn't working now. it will work in odin, and says it passes, but when i try to boot or get into recovery mode, it won't do it
Click to expand...
Click to collapse
1) Pull the battery and let the phone sit for a few seconds,
2) (HOLD VOL UP+HOME+POWER) and
3) pop the battery in while holding those 3 buttons and see if you can get into recovery this way.
If you can get to recovery this way then do Factory Reset and reboot.
A_youu said:
1) Pull the battery and let the phone sit for a few seconds,
2) (HOLD VOL UP+HOME+POWER) and
3) pop the battery in while holding those 3 buttons and see if you can get into recovery this way.
If you can get to recovery this way then do Factory Reset and reboot.
Click to expand...
Click to collapse
no luck. i'm going to leave the battery out overnight and try again in the morning
craig.hagler said:
no luck. i'm going to leave the battery out overnight and try again in the morning
Click to expand...
Click to collapse
I've read thru this thread, and see your having problems everything recovery mode.
Q:
You sure you have a custom recovery installed?
Are you sure it's rooted?
If so then you should be able to install a custom recovery, using goo manger!
You can also look here for info..
http://forum.xda-developers.com/showthread.php?p=46900555
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Tried Cyanogen 10.2 d2spr
Sprint Galaxy s3 L710
Android 4.3
Odin 1.85
Got superuser and used goomanager w twrps
made backups
Tried to flash cyanogen and i got error missing md5
tried a fix where you edit the updater-scripts in the cyanogen zip and that didnt work
Then I read that switching to cws would fix the problem, I read that you can d/l the cws zip and use twrps to flash it
Basically I was way over my head and shoulda kept the restore to stock option because that WAS working
Phone wont boot normal. volumeup and power and menu just flashes"recovery booting" or something really fast in the top left corner and shuts back off
Idk... Odin doesnt recognize the phone anymore
Definitely dont know what im doing anymore
thecuddy said:
Tried Cyanogen 10.2 d2spr
Sprint Galaxy s3 L710
Android 4.3
Odin 1.85
Got superuser and used goomanager w twrps
made backups
Tried to flash cyanogen and i got error missing md5
tried a fix where you edit the updater-scripts in the cyanogen zip and that didnt work
Then I read that switching to cws would fix the problem, I read that you can d/l the cws zip and use twrps to flash it
Basically I was way over my head and shoulda kept the restore to stock option because that WAS working
Phone wont boot normal. volumeup and power and menu just flashes"recovery booting" or something really fast in the top left corner and shuts back off
Idk... Odin doesnt recognize the phone anymore
Definitely dont know what im doing anymore
Click to expand...
Click to collapse
Can you get into download mode or are you just plugging into the computer; Odin won't recognize your phone unless it is in download mode first. Also, I find Odin 3.07 to be a bit better than 1.85.
Mr. Struck said:
Can you get into download mode or are you just plugging into the computer; Odin won't recognize your phone unless it is in download mode first. Also, I find Odin 3.07 to be a bit better than 1.85.
Click to expand...
Click to collapse
it doesnt do anything when i try to get to download mode.
If its plugged to the computer or wall, it will boot loop without a samsung screen
Not plugged in boots to samsung screen with blue text top left and shuts off right after. can barely read the blue text its so fast
thecuddy said:
it doesnt do anything when i try to get to download mode.
If its plugged to the computer or wall, it will boot loop without a samsung screen
Not plugged in boots to samsung screen with blue text top left and shuts off right after. can barely read the blue text its so fast
Click to expand...
Click to collapse
To be clear, you are holding Volume Down (not Volume Up, which is for Recovery Mode), Home Key, and Power Button all at the same time until the main Download screen appears?
Mr. Struck said:
To be clear, you are holding Volume Down (not Volume Up, which is for Recovery Mode), Home Key, and Power Button all at the same time until the main Download screen appears?
Click to expand...
Click to collapse
ok. i wasnt holding that one long enough. so now use odin? <3
Mr. Struck said:
To be clear, you are holding Volume Down (not Volume Up, which is for Recovery Mode), Home Key, and Power Button all at the same time until the main Download screen appears?
Click to expand...
Click to collapse
Ran odin and now i can get it to boot to cwm instead of twrps. should i go for the install again or call it quits. i dunno what exactly went wrong or how to go about the install from this point. thank you
thecuddy said:
ok. i wasnt holding that one long enough. so now use odin? <3
Click to expand...
Click to collapse
You need a couple of things first. You will want to use Odin to push the latest version of Philz Touch, as it is a much better recovery than either CWM or TWRP. There is an option in Philz to restore TWRP backups, so as long as the backup you made earlier was of a proper working ROM (I would assume of your stock version), then you can use Philz to restore it. If you aren't comfortable switching recoveries right away, use Odin to push TWRP again. Basically, I want to make sure you have a working custom recovery in place before proceeding any further. Also, don't use a third-party to download/install ROM's, you need to be downloading from the official source. If you are wanting to run Cyanogen, go to their website and download directly from them.
Philz Touch XDA Thread by CNexus
http://www.cyanogenmod.org/
Once you have pushed the recovery onto your phone (make sure the Reboot option is unchecked in Odin, otherwise it will boot up too soon), pull your battery out for about ten seconds, replace, and then use the button sequence for Recovery Mode, make sure to hold the buttons past the vibration until the actual screen pops up.
---------- Post added at 12:35 AM ---------- Previous post was at 12:26 AM ----------
thecuddy said:
Ran odin and now i can get it to boot to cwm instead of twrps. should i go for the install again or call it quits. i dunno what exactly went wrong or how to go about the install from this point. thank you
Click to expand...
Click to collapse
If you received an MD5 error on the first install, you most likely have a bad download, so you probably won't be able to flash it with CWM either. I am assuming that when you made your backup, you used TWRP, in which case you cannot restore that with CWM, you will need either Philz Touch or TWRP. We need to get you booted back into a working system before proceeding, as you should have no OS installed currently if you wiped everything properly before attempting to flash Cyanogen.
I feel like Im going to have three different recoveries on the phone if I do that. I don't understand what im doing fundamentally. All I can do right now is follow instructions. And I'm scared now lol. How do I increase your thanks meter ahah Maybe I should do more research. Should what I was trying to do work in the first place?
thecuddy said:
I feel like Im going to have three different recoveries on the phone if I do that. I don't understand what im doing fundamentally. All I can do right now is follow instructions. And I'm scared now lol. How do I increase your thanks meter ahah Maybe I should do more research. Should what I was trying to do work in the first place?
Click to expand...
Click to collapse
Only one recovery can exist at a time, so whatever one you pushed or flashed most recently will be the current one. Which one did you have on the phone when you made your backup? That will be a good starting point.
Mr. Struck said:
Only one recovery can exist at a time, so whatever one you pushed or flashed most recently will be the current one. Which one did you have on the phone when you made your backup? That will be a good starting point.
Click to expand...
Click to collapse
Started with twrps. Got md5 error. Reverted to backup. Then got cwm zip and booted to twps and tried to install it. Then problem.
thecuddy said:
Started with twrps. Got md5 error. Reverted to backup. Then got cwm zip and booted to twps and tried to install it. Then problem.
Click to expand...
Click to collapse
So as I mentioned earlier, you will need to get either TWRP back as your recovery, in order to restore the backup you made with it, or you will want to switch to Philz, which is the best recovery option available anyway, and use Philz to restore your TWRP backup. I think for starters you will want to use TWRP just to get back up and running, and then switch to Philz soon so that you aren't too overwhelmed tonight.
http://techerrata.com/browse/twrp2/d2spr
Choose the tar file for either version 2.6.3.0 or 2.6.3.1 and use Odin to push it onto your phone (2.6.3.1 is the newest version, but doesn't install properly on some devices; 2.6.3.0 should work for our purposes if 2.6.3.1 doesn't install properly for you). Then follow my instructions a couple of posts back about booting into recovery after using Odin.
Ill have to do this tomorrow. I pushed the tar through with odin and the phone is running at stock with supersu. Im not sure if my recovery is cwm or twrp now. But I have spent all day doing this. Ill continue tomorrow thnx again.
thecuddy said:
Ill have to do this tomorrow. I pushed the tar through with odin and the phone is running at stock with supersu. Im not sure if my recovery is cwm or twrp now. But I have spent all day doing this. Ill continue tomorrow thnx again.
Click to expand...
Click to collapse
You should now have TWRP as your custom recovery. Feel free to PM me if needed tomorrow for any advice going forward.
My phone is not booting into recovery at all, when I hold down the vol up + home + power it just loops. It keeps giving me a message about my kernel. I know there are a lot of other threads regarding looping issues, but are still able to get into recovery. I've spent hours trying everything I have come across that might seem to work and nothing has. Does anyone know of a way to use Odin from a PC to fix this issue?? I attached a screen shot of the files so far that I have tried using through Odin on my computer and a couple others. I'm very desperate at this point for any advice!! Thanks...
Anonymous777 said:
My phone is not booting into recovery at all, when I hold down the vol up + home + power it just loops. It keeps giving me a message about my kernel. I know there are a lot of other threads regarding looping issues, but are still able to get into recovery. I've spent hours trying everything I have come across that might seem to work and nothing has. Does anyone know of a way to use Odin from a PC to fix this issue?? I attached a screen shot of the files so far that I have tried using through Odin on my computer and a couple others. I'm very desperate at this point for any advice!! Thanks...
Click to expand...
Click to collapse
have you updated to the kitkat bootloader. if you have and try to use the cf root made for our device the recovery is no longer usable. google search cf auto root for n9005 kitkat. that one works though it will install the recovery for the n9005 but is functional other than that i would say go to sammobile.com and make an account (free) then download wich ever version you had running wether it be 4.3 or 4.4 then use 7zip and extract the recover.img then flash that using odin.....
Anonymous777 said:
My phone is not booting into recovery at all, when I hold down the vol up + home + power it just loops. It keeps giving me a message about my kernel. I know there are a lot of other threads regarding looping issues, but are still able to get into recovery. I've spent hours trying everything I have come across that might seem to work and nothing has. Does anyone know of a way to use Odin from a PC to fix this issue?? I attached a screen shot of the files so far that I have tried using through Odin on my computer and a couple others. I'm very desperate at this point for any advice!! Thanks...
Click to expand...
Click to collapse
I accidentally up loaded a wrong photo, disregard the Cyanogen picture
Anonymous777 said:
My phone is not booting into recovery at all, when I hold down the vol up + home + power it just loops. It keeps giving me a message about my kernel. I know there are a lot of other threads regarding looping issues, but are still able to get into recovery. I've spent hours trying everything I have come across that might seem to work and nothing has. Does anyone know of a way to use Odin from a PC to fix this issue?? I attached a screen shot of the files so far that I have tried using through Odin on my computer and a couple others. I'm very desperate at this point for any advice!! Thanks...
Click to expand...
Click to collapse
Give step by step of what you did. Every step.
TWEAKED N3
stash9123 said:
have you updated to the kitkat bootloader. if you have and try to use the cf root made for our device the recovery is no longer usable. google search cf auto root for n9005 kitkat. that one works though it will install the recovery for the n9005 but is functional other than that i would say go to sammobile.com and make an account (free) then download wich ever version you had running wether it be 4.3 or 4.4 then use 7zip and extract the recover.img then flash that using odin.....
Click to expand...
Click to collapse
No I haven't tried that yet. I will try for sure. Thank you for the advice I appreciate it!
BACARDILIMON said:
Give step by step of what you did. Every step.
TWEAKED N3
Click to expand...
Click to collapse
I used the ROM Installer app and downloaded the Pac-Man Rom + Gapps, booted into recovery (using twrp.) I then wiped the data, cache, dalvik, and then tried installing the zip files i had downloaded. It would at first just reboot my phone normally and so I downloaded the a aokp Rom off the internet and onto my flash drive, then used a cable to attach both the phone and drive and tried installing the Aokp ROM. That then put my into a loop, I was able to get out of it by using Odin and flashing the openrecoverytwrp.2.6.3.0.img which got me booting back to normal. Sooo I then tried again and then lost the option of getting into recovery.
Their ROM is 4.4. What boot loader do you have. Did you update to kit Kat?
Anonymous777 said:
I used the ROM Installer app and downloaded the Pac-Man Rom + Gapps, booted into recovery (using twrp.) I then wiped the data, cache, dalvik, and then tried installing the zip files i had downloaded. It would at first just reboot my phone normally and so I downloaded the a aokp Rom off the internet and onto my flash drive, then used a cable to attach both the phone and drive and tried installing the Aokp ROM. That then put my into a loop, I was able to get out of it by using Odin and flashing the openrecoverytwrp.2.6.3.0.img which got me booting back to normal. Sooo I then tried again and then lost the option of getting into recovery.
Click to expand...
Click to collapse
4.4 or 4.3
TWEAKED N3
BACARDILIMON said:
4.4 or 4.3
TWEAKED N3
Click to expand...
Click to collapse
I'm on 4.4 now...
Anonymous777 said:
I'm on 4.4 now...
Click to expand...
Click to collapse
OK do this go to sammiemobile get the factory stock. Flash thru Odin. Then reboot make sure it stock. Download to your PC the ROM you want. Cf auto root and the recovery you like for kit Kat. Don't use any app to download anything. Once you set. Then do the cfautoroot. Let that cycle. Then flash recovery thru Odin. Then reboot. Then power down and reboot into recovery . it works .good. Boot up then add ROM to SD reboot recovery and flash. Done.
Factory wipe before going stock.
TWEAKED N3
BACARDILIMON said:
OK do this go to sammiemobile get the factory stock. Flash thru Odin. Then reboot make sure it stock. Download to your PC the ROM you want. Cf auto root and the recovery you like for kit Kat. Don't use any app to download anything. Once you set. Then do the cfautoroot. Let that cycle. Then flash recovery thru Odin. Then reboot. Then power down and reboot into recovery . it works .good. Boot up then add ROM to SD reboot recovery and flash. Done.
Factory wipe before going stock.
TWEAKED N3
Click to expand...
Click to collapse
Okay cool I'll give that a try, thank you!
Anonymous777 said:
Okay cool I'll give that a try, thank you!
Click to expand...
Click to collapse
Make sure you use the proper cf auto root and cwm or twrp
TWEAKED N3
You don't keep holding those buttons when the red and blue and yellow words pop up do you? Our phone allows us to hold the power button for about 6 seconds and it will reboot.
Let up off those buttons you're holding when trying to boot into recovery as soon as you see the blue and red and yellow writing.
The blue writing states that you're already booting Into recovery.
Tl;dr You're holding the buttons too long after it reboots. Let off them.
Eek, I just read the steps you tried to resolve this. Sorry you had to go through that. I don't think that was your issue, but I just thought I'd throw my 2cents in
BTW if this is not the case, then disregard please.
☆sent from a kitkat powered sm-n900t w/tapatalk☆
BACARDILIMON said:
Make sure you use the proper cf auto root and cwm or twrp
TWEAKED N3
Click to expand...
Click to collapse
I did exactly what you said and it worked! I appreciate your help!!!!!! I just downloaded the stock firmware and my phone booted back to factory settings. I haven't rooted it yet. I have a few different cf auto root files, is this the correct one CF-Auto-Root-hlte-htlexx-smn9005.tar.md5?
Just out of curiosity, which back up do you prefer cwm or twrp?
cuezaireekaa said:
You don't keep holding those buttons when the red and blue and yellow words pop up do you? Our phone allows us to hold the power button for about 6 seconds and it will reboot.
Let up off those buttons you're holding when trying to boot into recovery as soon as you see the blue and red and yellow writing.
The blue writing states that you're already booting Into recovery.
Tl;dr You're holding the buttons too long after it reboots. Let off them.
Eek, I just read the steps you tried to resolve this. Sorry you had to go through that. I don't think that was your issue, but I just thought I'd throw my 2cents in
BTW if this is not the case, then disregard please.
☆sent from a kitkat powered sm-n900t w/tapatalk☆
Click to expand...
Click to collapse
Yeah it's all good, I got it fixed finally. I'm not exactly sure what my issue was I'm just glad it's working. I tend to try different things with my phone or phones i've had in the past without, I just wasn't careful enough to what I was doing I guess. Are you running cm ROM on your N3?
Anonymous777 said:
I did exactly what you said and it worked! I appreciate your help!!!!!! I just downloaded the stock firmware and my phone booted back to factory settings. I haven't rooted it yet. I have a few different cf auto root files, is this the correct one CF-Auto-Root-hlte-htlexx-smn9005.tar.md5?
Just out of curiosity, which back up do you prefer cwm or twrp?
Click to expand...
Click to collapse
Yup that is the right cf auto root. I have flashed both recovery thru Odin. Work great both times. I used cwm up until 3 days ago. Switched because one of my friends was having issues and wanted to make sure it was not a recovery thing. Been on twrp and it good. Glad I could help you. Enjoy the greatness of this phone.
TWEAKED N3
Dam it i got the same problem but i really can't boot into recovery or download mode. Anyone know how i can adb into download mode?
Edit: Figured it out... thank god.
Just a heads up. Next time to save time of a huge file download. Just download another Recovery for your device. You flashed a corrupt recovery which caused your phone to not go into recovery at all. Always ensure the model # matches yours also.
Sent from my iPhone using Tapatalk
Also flashing CF-Auto Root does not help a bad recovery fix, it just roots your phone, so you flashing CF AutoRoot was of no use at that point.
alvin14 said:
Just a heads up. Next time to save time of a huge file download. Just download another Recovery for your device. You flashed a corrupt recovery which caused your phone to not go into recovery at all. Always ensure the model # matches yours also.
Sent from my iPhone using Tapatalk
Also flashing CF-Auto Root does not help a bad recovery fix, it just roots your phone, so you flashing CF AutoRoot was of no use at that point.
Click to expand...
Click to collapse
The reason he got the bootloop was cause cf root does it. That is why he needed to download the cf auto root euro version.
TWEAKED N3
BACARDILIMON said:
The reason he got the bootloop was cause cf root does it. That is why he needed to download the cf auto root euro version.
TWEAKED N3
Click to expand...
Click to collapse
I don't think its that. If it is their post should be in the International Note 3 9005 thread, not T-Mobiles thread, and seeing that they have been rooted before ( i know because thats the only way they could reboot to recovery with rom manager) they must have used the n900t CF AutoRoot which is correct if the person have the T-Mobile version. Reading through and seeing that they never confirmed or have been asked for their phone model, just the second post person suggesting stuff for the 9005 without questions, since he/she said they haven't rooted yet after successfully booting up from the stock flash, he/she haven't used the 9005 Auto Root as yet which I think they shouldn't as they might brick their phone. His recovery went bad after he flashed the wrong recovery to their phone.
alvin14 said:
I don't think its that. If it is their post should be in the International Note 3 9005 thread, not T-Mobiles thread, and seeing that they have been rooted before ( i know because thats the only way they could reboot to recovery with rom manager) they must have used the n900t CF AutoRoot which is correct if the person have the T-Mobile version. Reading through and seeing that they never confirmed or have been asked for their phone model, just the second post person suggesting stuff for the 9005 without questions, since he/she said they haven't rooted yet after successfully booting up from the stock flash, he/she haven't used the 9005 Auto Root as yet which I think they shouldn't as they might brick their phone. His recovery went bad after he flashed the wrong recovery to their phone.
Click to expand...
Click to collapse
Let's agree to disagree. But if you check chainfires tweet he even said to use the cf euro version because it plays right with the TMOBILE. I have helped may bootloopers with just changing the root method. Just ask the op. He tried just the recovery with bootloops. And it was the right one cause he used the one I used.
TWEAKED N3