Develop Bugs

OpenRUU for Linux & Mac - NEW! Extract rom.zip from any RUU! BETA2

OpenRUU - RUU Shell Script For Linux & Mac
This is a shell script to flash an official RUU from HTC.
You do not need root.
Prerequisites:
Wine - Only needed to extract a rom from an RUU.
The script will:
NEW! Extract a rom.zip from an RUU & works on any device!
Get your current ROM version
Get Your Current HBOOT Version
Get Your Battery %
Reboot into RUU Mode
Flash the ROM using fastboot or NEW! Flash the rom in HBOOT without a PC!
Reboot your phone
Enjoy!
DOWNLOADS:
RUU Exract Version (beta) http://forum.xda-developers.com/attachment.php?attachmentid=350639&stc=1&d=1277632079]
If you can, please donate so I can afford better hosting, I also have some cool features to implement when I get proper hosting too. (If you can host a rom.zip, please PM me.)
Donate - GBP
Donate - Euro
Donate - Dollars
Post here with any bugs/comments so my turkeys can get to work!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Reserved for q&a

Reserved #2

Nice job! Well done

With beta2 I have cleaned up the fastboot scripts alot & general cleaning up of the scripts.

Is this the method for unrooting the HTC and return to stock roms? Like it is done when executing the ruu.exe in windows.

You should add a prerequisites section.
Not everybody has wine installed be default.

adwinp said:
You should add a prerequisites section.
Not everybody has wine installed be default.
Click to expand...
Click to collapse
Done.
10char

Just one question quickly. Say I extract the rom.zip from one of the official 2.1 RUU's - will it be flashable in such a way that I don't lose my custom recovery image? In other words, is the SPL removed?

MrPadie said:
Just one question quickly. Say I extract the rom.zip from one of the official 2.1 RUU's - will it be flashable in such a way that I don't lose my custom recovery image? In other words, is the SPL removed?
Click to expand...
Click to collapse
Nothing is removed or added, just the same as using an HTC ruu on windows.
Sent from Steve Job's Android Dungeon with my HTC Hero

I see. Just a heads up - wine for mac does not allow the RUU install to get past the initial loading screen. Wine error is:
Code:
fixme:storage:create_storagefile Storage share mode not implemented.
err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUGlobal.dll") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUGlobal.dll") not found
err:module:import_dll Library ARUGlobal.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe" failed, status c0000135

MrPadie said:
I see. Just a heads up - wine for mac does not allow the RUU install to get past the initial loading screen. Wine error is:
Code:
fixme:storage:create_storagefile Storage share mode not implemented.
err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUGlobal.dll") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUGlobal.dll") not found
err:module:import_dll Library ARUGlobal.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe" failed, status c0000135
Click to expand...
Click to collapse
That's normal if you are just seeing the loading screen. You have to hit enter on the script just before it dissapears. I'm working on a better solution.
Sent from Steve Job's Android Dungeon with my HTC Hero

Ah, I see. I already tried to hit enter at that point, and it didn't find it - must have not been copied over yet. However, at the same time, I manually watched the temporary directory as it was being created and I didn't see the rom.zip file appear, from start to finish. Has it worked for you on Mac yet? Never the less, I achieved what I wanted with Windows...one of the very little things I can achieve with it
Keep up the good work, really great script.
Mr P.

Hello,
I have a problem with OpenRUU explained on modaco forum
Edit : It's OK, goldcard issue
Thank

Will this work if the RUU is not working ?
Hi,
Will openRUU extract a rom form the RUU to work on my hero if the RUU is not working in the exe mode on windows and giving signature error (even with goldcard).
I have a stock rom 2.73.405.66 and a custom recovery ClockWokMod 2.0.1.3 and I have not been able to downgrade to 2.73.405.5 using the "RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe" file with the latest HTC sync running and 2 different goldcards. Always a signature error.
Will openRUU work using the same RUU exe and my hero ?
Thanks,
Sean.

42turkeys said:
Nothing is removed or added, just the same as using an HTC ruu on windows.
Sent from Steve Job's Android Dungeon with my HTC Hero
Click to expand...
Click to collapse
thx mate..

Sign of a noob: I thought I knew what I was doing
Okay, ran the script as directed. It fell down a couple of times, so I altered a line in 1extractrom.sh to point to scripts/linux/cptoworkingdir.sh instead of scripts/cptoworkingdir.sh, then added a trailing "/" to the adb-linux push line in scripts/linux/desire.sh, after which it progressed smoothly and worked fine.
The phone boots okay into fastboot, recovery and into the OS. At least, I assume it boots okay...it certainly makes all the right beeps and buzzes. I can't be sure it's working okay because.....the screen is completely blank.
Not a flicker of life. I know it boots okay into fastboot, because I can connect to it with fastboot on my Ubuntu box, but I can't see a darned thing on the Desire's screen. No little red circle at first power-on. No boot screens or animation. Nothing.
So...what did I do wrong? Am I missing something obvious?

HTC Wildfire is not listed as an option, is it supported by the tool?

I was wondering the same thing it would be great if this works on the Wildfire.

Well, to be honest if this is using Wine then it is pretty useless.
Anyway, does it work on the HD2 Leo ??

[GUIDE]How to Enable .net Framework 3.5.1 Offline in Windows 8,8.1

Many of us are using Windows 8 Developer or Consumer Preview.While using Windows 8 Beta version,sometimes you will get the message to install .net framework,for running those applications which require .net Framework to operate.
But it becomes quite difficult for us to download and install Microsoft .net Framework online.There can be many reason for that.
Know here question arises that Windows 8 comes with pre-installed .net framework application,then why it is asking for re-installation.It is because Windows 8 beta Setup doesn't install the .net
Framework,we have to manually install it.
How to Install / Enable .net framework 3.5.1 in Offline mode
Go on "Search" Option of Windows 8 and type cmd
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now Right click on the "cmd" and if you are using Windows 8 Developer Preview then click on Advanced and after that click "Run as Administrator".If you are using Windows 8 Consumer Preview then after right click on "cmd" click on Run as administrator option.
Insert your Windows 8 Installation Disc in the Drive
Now enter the Following command in "cmd"
Code:
dism.exe /online /enable-feature /featurename:NetFX3 /Source:G:\sources\sxs /LimitAccess
Please note:- Letter "G" in above command is the drive letter in which your Windows 8 installation Disc has been inserted.
Just click Enter button after writing the commands.
Wait for a minute and your .net Framework will be installed.

**Edit**, nevermind... haha

not working for X64
not working for X64
another way : for x32 and x64
1.open run (win key +r )
2.enter: gpedit.msc
3.Expand Computer Configuration, expand Administrative Templates, and then select System.
Open the Specify settings for optional component installation and component repair Group Policy setting, and then select Enabled.
4.If you want to specify an alternative source file, in the Alternate source file path box, specify a fully qualified path of a shared folder that contains the contents of the \sources\sxs folder from the installation media.
example: D:\sources\sxs

?
It does not work from usb flash? I tried but it did not work ..

radospol said:
It does not work from usb flash? I tried but it did not work ..
Click to expand...
Click to collapse
i am tested usb flash and dvd disk workink good you must run cmd run as administractor

awesome !!
Works perfect on windows 8 professional !

Alimataei said:
not working for X64
Click to expand...
Click to collapse
yes man you are right >>> it also happened to me but i solved the problem
Just i changed the image that i used to another image with another version

Works! Thanks mate.

working good in my win 8 enterprise
FYI : if you have iso files of win 8, just mount it.

Works like the proverbial "Charm" on my WIndows 8 Enterprise where we sit behind an authenticating proxy making Windows 8 Update dang near impossible.
Thanks HUGELY, behnameb7
behnameb7 said:
Many of us are using Windows 8 Developer or Consumer Preview.While using Windows 8 Beta version,sometimes you will get the message to install .net framework,for running those applications which require .net Framework to operate.
But it becomes quite difficult for us to download and install Microsoft .net Framework online.There can be many reason for that.
Know here question arises that Windows 8 comes with pre-installed .net framework application,then why it is asking for re-installation.It is because Windows 8 beta Setup doesn't install the .net
Framework,we have to manually install it.
How to Install / Enable .net framework 3.5.1 in Offline mode
Go on "Search" Option of Windows 8 and type cmd
Now Right click on the "cmd" and if you are using Windows 8 Developer Preview then click on Advanced and after that click "Run as Administrator".If you are using Windows 8 Consumer Preview then after right click on "cmd" click on Run as administrator option.
Insert your Windows 8 Installation Disc in the Drive
Now enter the Following command in "cmd"
Code:
dism.exe /online /enable-feature /featurename:NetFX3 /Source:G:\sources\sxs /LimitAccess
Please note:- Letter "G" in above command is the drive letter in which your Windows 8 installation Disc has been inserted.
Just click Enter button after writing the commands.
Wait for a minute and your .net Framework will be installed.
Click to expand...
Click to collapse

what is the command for x64?

Thanx
$eNt FrØm JeLLy BlA$T 3.4
WaItIn FoR NemESiS...!!

spider623 said:
what is the command for x64?
Click to expand...
Click to collapse
see my post in page 1

Can anyone pls upload their working sxs folder? Coz i don't have any other disc of windows 8 and i will not be able to connect internet on my laptop unless i install the net framework 3.5.
Pls upload your working sxs folder in zip format.
Using windows 8 x64 enterprise.

Alimataei said:
not working for X64
another way : for x32 and x64
1.open run (win key +r )
2.enter: gpedit.msc
3.Expand Computer Configuration, expand Administrative Templates, and then select System.
Open the Specify settings for optional component installation and component repair Group Policy setting, and then select Enabled.
4.If you want to specify an alternative source file, in the Alternate source file path box, specify a fully qualified path of a shared folder that contains the contents of the \sources\sxs folder from the installation media.
example: D:\sources\sxs
Click to expand...
Click to collapse
Hi Bro, its still not working for me, I'm use win8 enterprise x64, can you help me???

anyone who was able to make this work ? if so, can you send me a copy of your SXS folder in 7zip ? this method wont work on my x64 using my disc. my disc may be corrupted. thanks.

Help..!!
Star_Box said:
yes man you are right >>> it also happened to me but i solved the problem
Just i changed the image that i used to another image with another version
Click to expand...
Click to collapse
Can you please explain.
I am unable to get it work on 64bit. Please help.

tausift0 said:
Can you please explain.
I am unable to get it work on 64bit. Please help.
Click to expand...
Click to collapse
Make sure you are running cmd.exe as administrator.
For me has been worked perfect on both 32-bit and 64-bit Windows 8 Professional.

Alimataei said:
not working for X64
another way : for x32 and x64
1.open run (win key +r )
2.enter: gpedit.msc
3.Expand Computer Configuration, expand Administrative Templates, and then select System.
Open the Specify settings for optional component installation and component repair Group Policy setting, and then select Enabled.
4.If you want to specify an alternative source file, in the Alternate source file path box, specify a fully qualified path of a shared folder that contains the contents of the \sources\sxs folder from the installation media.
example: D:\sources\sxs
Click to expand...
Click to collapse
Don't think so, i have automatically installed on x64
Sent from my C6603 using xda premium

BUMP
i've been tried all of oppinion and tips above. but it still not work, here i give my dism.log file https://www.dropbox.com/s/4icchjlla8ffovr/dism.log

[DRIVERS] Latest HTC Drivers [4.2.0.001]

Latest HTC Drivers
Latest HTC Drivers extracted from HTC Sync v3.3.21 and HTC Sync Manager v2.0.61.0
Latest Driver Version (HTC Sync): 4.0.1.001
Latest Driver Version (HTC Sync Manager): 4.2.0.001
BMP Drivers are the same for both sets of drivers.
For those who don't want to have to download 120 some MB of bloatware called HTC Sync
Instructions:
Determine if your system is 32-bit or 64-bit
Download the BMP Driver for your OS type (x86 version if on 32-bit, x64 if on 64-bit)
Download the newest HTCDrivers file (choose either the "EXE" or "MSI" driver file, but not both)
Disable any antivirus program(s) present
Run both files downloaded above (the BMP.msi and the HTCDriver file)
Re-enable your antivirus program(s)
Click to expand...
Click to collapse
Links
ALL DRIVER FILES: www.mediafire.com/?o10b16j5b3r3o
OEM SETUP FILES: www.mediafire.com/?1rwmleoe17akd
Updated on 6.6.13
HTCDriver_4.2.0.001.exe
SyncManager_2.0.61.0.exe
Updated on 4.23.13
HTCDriver_4.1.0.001.msi
HTCDriver_4.1.0.001.exe
HTCPluginChecker.exe
HTCSync_3.3.21.exe
SyncManager_2.0.53.0.exe
SyncManager_2.0.53.0_STRIPPED.exe
Updated on 4.02.13
RemoveOldHTCDriver3.exe (packaged in HTC Sync Manager v2.0.41.0)
Removed duplicate x86 BMP Driver
Updated instructions with link to determine if on 32-bit or 64-bit
Updated on 3.31.13
HTCDriver_4.0.1.002.exe
HTCDriver_4.0.1.002.msi
IPTInstaller_4.0.8.msi
Updated on 3.6.13
HTC_BMP_USB_Driver_x86_1.0.5375.msi
HTC_BMP_USB_Driver_x64_1.0.5375.msi
HTCDriver_4.0.1.001.exe
HTCDriver_4.0.1.001.msi
Updated on 11.28.12
HTC BMP USB Driver_x86.msi DELETED: Turned out to be the same 1.0.5375 as above. Download from link above.
HTCDriver_3.0.0.023.msi
Click to expand...
Click to collapse
------------
MD5 CHECKSUMS
Sometimes downloading from the internet can yield a corrupt download. To prevent this, make sure you always check the md5 checksum (also known as "md5sum") of the file. This method verifies the digital integrity of the file by verifying its digital signature with the MD5 algorithm.
After you download each file, make sure to check that the md5sum matches what is given.
Code:
[LIST]
[*]25912deacc5d55528e223ec7b99705cc [B]*HTCDriver_3.0.0.023.msi[/B]
[*]220c41f3b03f42190899db8cb081b5c6 [B]*HTCDriver_4.0.1.001.exe[/B]
[*]a578d837343fe2542ecf405a630d46a0 [B]*HTCDriver_4.0.1.001.msi[/B]
[*]8223ec1c2aa71503b431a0daabb23154 [B]*HTCDriver_4.0.1.002.exe[/B]
[*]4dfbd4ae8662124d06e0a04db2065069 [B]*HTCDriver_4.0.1.002.msi[/B]
[*]bf24b0adc2f792ee4180ca545e4b60a0 [B]*HTC_BMP_USB_Driver_x32_1.0.5375.msi[/B]
[*]7b461095d56f9a6814d8f3e14cac0859 [B]*HTC_BMP_USB_Driver_x64_1.0.5375.msi[/B]
[*]96e6d181192a995214493a6828e4287d [B]*IPTInstaller_4.0.8.msi[/B]
[*]92bd34ec7787e631231c68aba392b6e7 [B]*RemoveOldHTCDriver3.exe[/B]
[*]f281d8994ab9f1315828ac2226a9bb75 [B]*HTCDriver_4.1.0.001.exe[/B]
[*]ed6d5fc5cc7dcca653f7a0beab01035d [B]*HTCDriver_4.1.0.001.msi[/B]
[*]96589c02be46fd7b85160d5b15f4c88a [B]*HTCPluginChecker.exe[/B]
[*]36ba2c8627ba18c6540bfa25be3b67fc [B]*HTCSync_3.3.21.exe[/B]
[*]a356e5c828c7cb3869dc67058e5bbc2c [B]*SyncManager_2.0.53.0.exe[/B]
[*]da1e40e478725d3e829243e84043d21f [B]*SyncManager_2.0.53.0_STRIPPED.exe[/B]
[/LIST]
Click to expand...
Click to collapse
How to check the md5sum of a file:
Windows:
For windows you need to download the md5sum binary. I recommend the one from my dev-host.
After that, copy the file you're trying to verify to the directory where where you downloaded the "md5sum.exe"
Once that is finished, do SHIFT+RIGHT CLICK (inside the folder window) and choose "Open command window here"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then type the following ("fileNameHere" must include the extension):
Code:
md5sum fileNameHere
That will output a hash, which you can compare to the ones above.
Linux: No need to download anything, md5sum binaries are included in all distros, as far as I know.
Open a terminal and type the following ("fileNameHere" must include the extension):
Code:
$ cd path/to/download/folder
$ md5sum fileNameHere
Two important notes:
This method can be used with any files you download, as long as the download site (or the dev themself) provides the correct md5sum.
If any of the digits do not match exactly, you need to download the file again.

Thanks!

Re: [DRIVERS] Latest HTC Drivers [v4.0.1.002]
heslo.rb26 said:
Thanks!
Click to expand...
Click to collapse
No problem :thumbup:

Wow thanks! This little things sometimes can be pain in the ass too

glen.ricky said:
Wow thanks! This little things sometimes can be pain in the ass too
Click to expand...
Click to collapse
Haha exactly
Plus ~15 MB versus 100 or 200 something is a lot easier to download haha

Updated OP with md5sum how-to and checksums.

Bump

The latest version is v4.1.0.001.
Cheers

Thanks I needed this
Sent from my HTC One X using Tapatalk 2

avensakias said:
The latest version is v4.1.0.001.
Cheers
Click to expand...
Click to collapse
SCREENIE OR IT DIDNT HAPPEN. Lol JK.
Yeah i know, just havent had time to upload them yet
EDIT: But thank you for reminding me, check below

Updated Drivers to version 4.1.0.001.
Two important note, from here on out I will also be including fast links for the Sync setup files (HTC Sync and Sync Manager), as well as a SyncManager_XXXXX_STRIPPED.exe which will literally be ONLY the Sync Manager program, all drivers stripped out from it (as in, it won't install any drivers, hence a much smaller file size).
You will now be able to find the FULL setup files for HTC Sync and Sync Manager inside the Original HTC Sync Folder of the linked mediafire folder in the OP. This will provide a much faster download if you do want to install either one, rather than a capped speed download from the HTC site itself.
Well here's the changelog
Updated on 4.23.13
HTCDriver_4.1.0.001.msi
HTCDriver_4.1.0.001.exe
HTCPluginChecker.exe
HTCSync_3.3.21.exe
SyncManager_2.0.53.0.exe
SyncManager_2.0.53.0_STRIPPED.exe

Hi I downloaded drivers and can flash Roms n all d stuffs but it fails to recognise my phone in mtp mod plz help
Sent from my HTC One X using xda app-developers app

sripin said:
Hi I downloaded drivers and can flash Roms n all d stuffs but it fails to recognise my phone in mtp mod plz help
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Uninstall everything that has to do with the HTC drivers. Then download the latest sync manager (from above, the full version not STRIPPED) and install the drivers through that. Then quit the installation when it tries to install the actual Sync Manager

Updated on 6.6.13
HTCDriver_4.2.0.001.exe
SyncManager_2.0.61.0.exe

[Tool][Guide] LeeDrOiD and ICE svnZipper | Windows | Linux | Mac

svnZipper​
As you may know developers like @LeeDroid and @baadnewz use Subversion so users can get the latest changes quickly. Although this results in users checking out the Subversion repository and zipping the ROM themselves. This doesn't sound too difficult and it isn't, but to make things easier I made a tool I like to call "svnZipper". It is a pre-built binary with all the dependencies to build a nightly ROM from @LeeDroid and @baadnewz repositories, this has support for Windows, Linux and Mac.
As we are not all perfect the tools does face issues, be it bugs or user issues, I am finding it hard to keep track of all these issues popping up in each thread. Therefore I made this thread to get the latest svnZipper, follow guides and report any issues for me to answers and solve (although it is in HTC 10 thread you can post HTC One M9 and HTC One M8).
The Guide​
Step 1
Download the latest svnZipper:
LeeDrOiD get it here
ICE get it here
Put the svnZipper anywhere you like on your PC, I would recommend a folder you can easily access.
Step 2 (Only Required for Mac and Linux)
For Mac and Linux you will need to set the permissions of the binary to be executable. You are probably be familiar with this process if you are a Linux and Mac user but if you don't know the process I will explain it for you. Open up a terminal and change to the directory of the location of your svnZipper, then type the following command:
Mac:
chmod 0755 macSvnZipper followed by enter
Linux:
chmod 0755 linuxSvnZipper followed by enter
Step 3
Execute the svnZipper
Windows:
Double click the svnZipper.exe or open up command prompt in the location of the .exe and type:
svnZipper.exe followed by enter.
Mac:
With the terminal still open from Step 2, type the following command:
./macSvnZipper followed by enter
Linux:
With the terminal still open from Step 2, type the following command:
./linuxSvnZipper followed by enter
Once you have execute the screen you will be presented with a image as shown below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 4
Type the corresponding number next to the device you would like to build for and press enter. This will start the process of checking out files or updating the files that already exist if you have checked out before. This process will vary time consuming depending on how many files are needed to be download from the remote repository.
This process will complete the following steps:
1. Checkout/Update files from the remote repository for your device
2. Make a nightly .zip for your device
3. Make a md5 checksum file for .zip
All checked out files will be stored in the same directory of executable in the following paths:
LeeDrOiD:
HTC 10 it will be /LeeDrOiD_PME
HTC M9 it will be /LeeDrOiD_HIMA
HTC M8 it will be /LeeDrOiD_M8
ICE:
HTC 10 it will be /ice_pme
HTC M9 it will be /ice_hima
HTC M8 it will be /ice_m8
Once completed you will be presented with a screen shot similar to the ones below.
All nightly .zip and .md5 files will be stored in the same directory of executable in the following paths:
LeeDrOiD:
HTC 10 it will be /LeeDrOiD_PME/Builds
HTC M9 it will be /LeeDrOiD_HIMA/Builds
HTC M8 it will be /LeeDrOiD_M8/Builds
ICE:
HTC 10 it will be /ice_pme/Builds
HTC M9 it will be /ice_hima/Builds
HTC M8 it will be /ice_m8/Builds
The builds will be named in the following format:
LeeDrOiD:
HTC 10 it will be LeeDrOiD_PME_RXX.zip
HTC M9 it will be LeeDrOiD_HIMA_RXX.zip
HTC M8 it will be LeeDrOiD_M8_RXX.zip
ICE:
HTC 10 it will be ice_pme_nightly_rXX.zip
HTC M9 it will be ice_hima_nightly_rXX.zip
HTC M8 it will be ice_m8_nightly_rXX.zip
Step 5
If a update comes out and you would like to rebuild the ROM again, follow Step 3 and Step 4
FAQ
QUESTION: The build zip is extremely small and has missing files?
ANSWER: Delete the checked out files and execute the steps above again
QUESTION: The revision checked out by the tool is out of date and doesn't get the latest revision from the remote repository?
ANSWER: Delete the checked out files and execute the steps above again
Note: The FAQ will increase as I get more user experience.
Reporting a Issue
Take screen shot of the errors raised from the tool and post it in this thread. If I don't get as much information as possible I can not help you.
Note: Windows will automatically close is a issue arises, therefore I recommend that you execute the .exe in command prompt instead of double clicking.
XDA:DevDB Information
svnZipper, Tool/Utility for the HTC 10
Contributors
~clumsy~
Source Code: https://github.com/clumsy1991/svnZipper
Version Information
Status: Beta
Current Stable Version: 1.0.4
Stable Release Date: 2016-06-06
Created 2016-06-07
Last Updated 2016-06-07

Changelog
Changelog
V1.0.5
Set locale so SVN doesn't report errors handling non ascii file names.
Thanks to @coolberry for reporting the bug
V1.0.4
Considered as initial revision

Brillant.... Much easier to follow in the future with this dedicated thread.
Not to forget to mention that it's never been easier to update nightlies ?????
Sent from my HTC 10 using XDA-Developers mobile app

The Great Dane said:
Brillant.... Much easier to follow in the future with this dedicated thread.
Not to forget to mention that it's never been easier to update nightlies ?????
Click to expand...
Click to collapse
And press 1 to build

~clumsy~ said:
And press 1 to build
Click to expand...
Click to collapse
Shut up LMFAO [emoji12]

Different filesize
Hi @~clumsy~,
I already posted this in @LeeDroid thread but he told me to ask you about this.
been playing around with the svnZipper but I don't fully trust it. I have a fast NAS server where I made a folder for this. Added the zipper and executed it. Works well and downloaded (as far as I can tell, all the available files).
When the zip file is made during the process, the NAS seems to be slower so I made a local folder on my i7 32GB Windows 10 pro powered machine with raid SSD to this should work super fast.
Ran svnZipper and yes, it is fast but after the script was finished, I checked the file size of the created zip and it was about 300MB smaller then the one on the NAS. Turned out the only folder that was downloaded by the zipper is the system folder. The created MD5 "tells" me the zip is correct in filesize but as this is created based on the downloaded files, it is easy to get a corrupted/incomplete flashable rom file that can f*ck up you HTC 10.
Please see the attached printscreens. A local version and a nas version.
Is this something I'm doing wrong?
Thanks for your reply!

twistednl said:
Hi @~clumsy~,
I already posted this in @LeeDroid thread but he told me to ask you about this.
been playing around with the svnZipper but I don't fully trust it. I have a fast NAS server where I made a folder for this. Added the zipper and executed it. Works well and downloaded (as far as I can tell, all the available files).
When the zip file is made during the process, the NAS seems to be slower so I made a local folder on my i7 32GB Windows 10 pro powered machine with raid SSD to this should work super fast.
Ran svnZipper and yes, it is fast but after the script was finished, I checked the file size of the created zip and it was about 300MB smaller then the one on the NAS. Turned out the only folder that was downloaded by the zipper is the system folder. The created MD5 "tells" me the zip is correct in filesize but as this is created based on the downloaded files, it is easy to get a corrupted/incomplete flashable rom file that can f*ck up you HTC 10.
Please see the attached printscreens. A local version and a nas version.
Is this something I'm doing wrong?
Thanks for your reply!
Click to expand...
Click to collapse
One thing to note and I will add this to the OP. The MD5 is the MD5 of the zip created on your machine, so it will only check for corruption when transferring from your PC to you Phone, not from SVN to your machine.
Did you transfer the repository from your NAS to your i7 machine? Or rechecked the files out on your local machine?

~clumsy~ said:
One thing to note and I will add this to the OP. The MD5 is the MD5 of the zip created on your machine, so it will only check for corruption when transferring from your PC to you Phone, not from SVN to your machine.
Did you transfer the repository from your NAS to your i7 machine? Or rechecked the files out on your local machine?
Click to expand...
Click to collapse
No I did not move the file to my local machine but opened the zip.
Inside the zip you can see why the size is different. I'll add printscreens of the several versions I have. I use the svnZipper.exe version 1.04 FYI.
Everytime I run the zipper it just seems to grab some files and not all. My connection is a 100MB fiber and my local network is 1GB.
I could runs something like Wireshark during the execution of the zipper to see if there are any errors.
Regards Ralph

twistednl said:
No I did not move the file to my local machine but opened the zip.
Inside the zip you can see why the size is different. I'll add printscreens of the several versions I have. I use the svnZipper.exe version 1.04 FYI.
Everytime I run the zipper it just seems to grab some files and not all. My connection is a 100MB fiber and my local network is 1GB.
I could runs something like Wireshark during the execution of the zipper to see if there are any errors.
Regards Ralph
Click to expand...
Click to collapse
Yeah it needs to determine some errors, it's quite simple at the moment. I execute the svn checkout on a different thread it seems like errors are missed. So the local repo thinks it is upto date. It seems like a common bug and something I need to work. For now the only solution is to delete the local repo including the .SVN directory and run the process again. It isn't the best solution for now but I will fix it, I just need time.

~clumsy~ said:
Yeah it needs to determine some errors, it's quite simple at the moment. I execute the svn checkout on a different thread it seems like errors are missed. So the local repo thinks it is upto date. It seems like a common bug and something I need to work. For now the only solution is to delete the local repo including the .SVN directory and run the process again. It isn't the best solution for now but I will fix it, I just need time.
Click to expand...
Click to collapse
Good luck with that. If you need any help testing, just PM me and I will try to help you out.
Please bear in mind I only reported this to warn you and not because of any complains about your work
Cheers!

twistednl said:
Good luck with that. If you need any help testing, just PM me and I will try to help you out.
Please bear in mind I only reported this to warn you and not because of any complains about your work
Cheers!
Click to expand...
Click to collapse
I know! Much appreciated! This why I made the thread so i can capture bugs and peoples experiences.

Thank you!
Though resume download is broken in this SVN tool, it will see the files downloaded as complete and will not give an option to resume or force resume

great job,thanks!

~clumsy~ said:
Yeah it needs to determine some errors, it's quite simple at the moment. I execute the svn checkout on a different thread it seems like errors are missed. So the local repo thinks it is upto date. It seems like a common bug and something I need to work. For now the only solution is to delete the local repo including the .SVN directory and run the process again. It isn't the best solution for now but I will fix it, I just need time.
Click to expand...
Click to collapse
Thanks for the heads up....
Sent from my HTC 10 using XDA-Developers mobile app

Just a minor fix, only 1 report case of the bug.
Changelog
V1.0.5
Set locale so SVN doesn't report errors handling non ascii file names.
Thanks to @coolberry for reporting the bug

Quite nice of a tool to use. But me I just highlight the 4-5 folders I need and right click send to folder and zip is created in few minutes.

Ndaoud360 said:
Quite nice of a tool to use. But me I just highlight the 4-5 folders I need and right click send to folder and zip is created in few minutes.
Click to expand...
Click to collapse
The tool is made for its ease of use and is independent so user don't have to install anything. It was requested by the devs. You can still use a manual solution.

Hi clumsy ...lovin your back-end work , kernel is smooth n functional , svnzipper windows works great ..
Now a nice request (challenge if you like) ..
Can we have a svnzipper for Android ..even shell based would be great, ...
Cheers
Sent from my HTC 10 using XDA-Developers mobile app

I have the same problem as mentioned on the first page. The program does not work correctly if I run it from a network share. It finishes downloading prematurely and it creates a partial ROM which does not work.
I took clumsy's script, stripped some parts in order to create a minimal example and to see what it does (I removed the multiprocess operations). The result: each time I run it, it works for several minutes, then it ends with the following error:
pysvn._pysvn_3_5.ClientError: ra_serf: The server sent a truncated HTTP response body.
It happens each time.

kfasheldon said:
Hi clumsy ...lovin your back-end work , kernel is smooth n functional , svnzipper windows works great ..
Now a nice request (challenge if you like) ..
Can we have a svnzipper for Android ..even shell based would be great, ...
Cheers
Click to expand...
Click to collapse
Sorry man, that will too much work as it wouldn't be possible with my current method.

Repair DEAD(HARD BRICKED) Realme 3 | 3i Tutorial

In this tutorial we are going to Repair Realme 3 (RMX1821) MT6771 Chipset.
from being hard bricked (no charge, no recovery, no fastboot) using SP Flashtool.
with the help of Bypass Utility "MTK-bypass" to disable bootrom protection(sla and daa).
MTK-bypass credits to @k4y0z
, @chaosmaster and @xyzz on github.
REQUIREMENTS:
• Python
Download Python
The official home of the Python Programming Language
www.python.org
• libusb-win32
https://sourceforge.net/projects/libusb-win32/files/libusb-win32-releases/1.2.6.0/libusb-win32-devel-filter-1.2.6.0.exe/download
• Sp Flashtool
SP Flash Tool Download All versions for MediaTek Devices
SP Flash tool download is the best application to flash Stock firmware, Custom recovery and fix some extreme issues on MediaTek Android smartphones. Download SP Flash tool all versions from our official download page.
spflashtool.com
• Bypass Utility Compiled
18.9 KB file on MEGA
mega.nz
---------------------------------------------------------------
• Bypass Utility Latest Releases
Release 1.4.1 · MTK-bypass/bypass_utility
Improve handshake reliability
github.com
• Exploits Latest Releases
Release 1.5 · MTK-bypass/exploits_collection
mt6261 mt6572 mt6580 mt6582 mt6735 mt6737 mt6739 mt6755 mt6757 mt6761 mt6763 mt6765 mt6768 mt6771 mt6785 mt6799 mt6873 mt8127 mt8163 mt8173 mt8695
github.com
• Realme 3 (rmx1821) Flashtool Firmware link soon
> I will upload the realme 3 firmware with Scatter File and Auth File for Third Party Flashtool like SP Flashtool soon, but if you have an official firmware of realme 3 with Scatter and Auth File you can use it no matter what version it is.
> If you know how to extract an OFP file, you can download this realme 3|3i firmware and extract the OFP file.
https://fileload.coloros.com/30842RMX1821EX_11_C.17_201117_cb5665f2.zip
> Video Tutorial on how to Extract OPPO | REALME firmware (OFP file)
VIDEO TUTORIAL
TEXT TUTORIAL
INSTALLATION:
• Install Python (tick checkbox "Add Python X.X to PATH") and proceed.
( if you are using windows 10, Download and Install Python 3.9 through Microsoft Store )
• Install lib-usb_win32
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click Next>Next> until you see the next image
Click Finish and Launch Lunch Filter Wizard
Choose the "Install a device filter" and click next
You will see this device selection.
Now you will need to connect you phone with power off to computer.
> Hold all the buttons and connect to the computer (wait until you see Mediatek USB Port in libusb Device selection and Install)
(note: you have to select and install it very quick, because the phone disconnect in just a few seconds)
> Wait until it shows this (Click OK and close libusb and Disconnect your phone)
INITIALIZATION:
• Extract Bypass Utility, and go to extracted folder
> type "cmd" in the address bar and hit enter
> in cmd console install (Install pyusb, pyserial, json5)
by typing: pip install pyusb pyserial json5
> after that bypass mtk
by typing: python main.py
> when you see "Waiting for bootrom" , you need to connect your phone again (Holding all button and plug it into your computer and wait until it recognized.)
you should have this following output. do not close this window and remember the Found port of you phone
as you can see my port is = COM7
DO NOT DISCONNECT YOUR PHONE FROM COMPUTER THIS TIME
FLASHING FIRMWARE:
• Extract SP Flashtool and Realme 3 Firmware
• Open flashtool.exe and click Options>Connection
and tick AURT instead of USB.
Select the COM port of the phone which is COM7 in my case
then close Option Window
• Now In Flashtool choose Scatter-File from the Extracted Firmware of Realme 3
(wait until it finished the Processing)
• After that choose Authentication File
• After loading Scatter and Auth File Click Download
It should start downloading the firmware to you phone now without any error.
(wait until it finished the download.)
When finished downloading you get a check windows indicating that the flash was successful!
Thats it Congratulations! You may now disconnect your phone from your computer and POWER ON.
your DEAD [HardBricked] Realme 3 is now Alive!
(Note: This method is applicable to any MTK devices with SoC mt6735, mt6750, mt6765, mt6771, mt6785, mt8127, mt8163, mt8173, mt8695)
For more updates about MTK-Bypass visit the official github page @
MTK-bypass
MTK-bypass has 8 repositories available. Follow their code on GitHub.
github.com
all the tools and utility is not mine. credits to the developer.
Original Bypass Tool xdaThread
[MOD][DEV] MediaTek / MTK - Auth Bypass (SLA/DAA) - Utility
As some of you have already noticed, a couple of weeks ago @Dinolek and I published a utility, that allows bypassing authentication on MTK devices. The tool is based on an exploit dubbed kamakiri, which was originally found by @xyz` and released...
forum.xda-developers.com
special thanks to @popoff-r for mentioning about a thread of repairing MTK devices.

Thanks

fawazahmed0 said:
Thanks
Click to expand...
Click to collapse
so its you , i thought the two in the credits in your github bypass_utility is one who develop it. im sorry sir. im not really familliar where to see the owner of the work it github. im really sorry for not mentioning your name in this. gotta edit now. You are Great sir!

ATDteam said:
so its you , i thought the two in the credits in your github bypass_utility is one who develop it. im sorry sir. im not really familliar where to see the owner of the work it github. im really sorry for not mentioning your name in this. gotta edit now. You are Great sir!
Click to expand...
Click to collapse
Thank you for putting this altogether, this should speed up the development work for this phone(kernel etc), as people don't have to go to service center for hard brick.
Also I want to tell you, I shouldn't get the credits for bypass_utility, the two people you mentioned should be getting the credits, I just forked(copy/cloned) the repository.
I assume you are new to github, anyone can fork(copy/clone) a repository by clicking on fork button
You can differentiate whether a repository is forked(copied) or original by seeing on the top left side.
Thanks

fawazahmed0 said:
Thank you for putting this altogether, this should speed up the development work for this phone(kernel etc), as people don't have to go to service center for hard brick.
Also I want to tell you, I shouldn't get the credits for bypass_utility, the two people you mentioned should be getting the credits, I just forked(copy/cloned) the repository.
I assume you are new to github, anyone can fork(copy/clone) a repository by clicking on fork button
View attachment 5205247
You can differentiate whether a repository is forked(copied) or original by seeing on the top left side.
View attachment 5205251
Thanks
Click to expand...
Click to collapse
Thank you so much that was a very helpful information.

How to fix this error sir..

What Error?, please provide screenshot of the error, if you can't explain it.

ATDteam said:
What Error?, please provide screenshot of the error, if you can't explain it.
Click to expand...
Click to collapse
Tihis sir

What Error?, please provide screenshot of the error, if you can't explain it.
Al Djufri said:
Tihis sir
View attachment 5207505
Click to expand...
Click to collapse
try to uninstall python and reinstall again, also download the bypass_utility, the one that i attached in this thread.
and try again. make sure your usb cable is working properly, it seems that your device does not read properly by the utility. change your cable if posible. Download python 3.9, if still doest work. try using windows 10 OS.
18.9 KB file on MEGA
mega.nz

ATDteam said:
What Error?, please provide screenshot of the error, if you can't explain it.
try to uninstall python and reinstall again, also download the bypass_utility, the one that i attached in this thread.
and try again. make sure your usb cable is working properly, it seems that your device does not read properly by the utility. change your cable if posible. Download python 3.9, if still doest work. try using windows 10 OS.
18.9 KB file on MEGA
mega.nz
Click to expand...
Click to collapse
Reinstalling python
Reinstalling lib libusb
Changing usb cable
Changing port usb
Change pc, i mean borrow a pc from my friend
Changing spflashtool, same problem sir?
Do you have telegram account

thanks it works thanks for saving my phone

Its not the same in your first screenshot you reach "Disabling protection" but in the 2nd one only the utility found your phone..., did you release all the buttons emmidiately after your computer detects your phone phone? It is important that you release emmidiately. Did you try to use windows 10.? Sorry I dont have telegram.
Al Djufri said:
Reinstalling python
Reinstalling lib libusb
Changing usb cable
Changing port usb
Change pc, i mean borrow a pc from my friend
Changing spflashtool, same problem sir?
Do you have telegram accountView attachment 5208303
Click to expand...
Click to collapse

XxRRSxX said:
thanks it works thanks for saving my phone
Click to expand...
Click to collapse
Thanks for using this thread as your guide, but credits is to the developers of the Utility.

ATDteam said:
Its not the same in your first screenshot you reach "Disabling protection" but in the 2nd one only the utility found your phone..., did you release all the buttons emmidiately after your computer detects your phone phone? It is important that you release emmidiately. Did you try to use windows 10.? Sorry I dont have telegram.
Click to expand...
Click to collapse
I'm trying to with my friend pc(windows 10) using latest python and same error sir..
Always Immediately release my button when pc detection my device.. but same error

( SOLVED )
you must be use windows 10
Use latest python version
Use latest SpFlash tool version
And don't forget to chek libusb instalation
Check via cmd "pip install libusb" and "pip install libusb1"
And try to use command "python main.py"
Sorry for my English..
Thanks sir..

Al Djufri said:
( SOLVED )
you must be use windows 10
Use latest python version
Use latest SpFlash tool version
And don't forget to chek libusb instalation
Check via cmd "pip install libusb" and "pip install libusb1"
And try to use command "python main.py"
Sorry for my English..
Thanks sir..
View attachment 5208681
Click to expand...
Click to collapse
Nice thats great! sometimes you really need to be on Trial and Error before you achieve what you want. happy for you. Thank you for using my thread as guide, Credits to the developers of the utility. and you have a good english. mine is bad. :-D

Anyone who facing problem when bootrom check, you have to flash first time or it will show error. Otherwise you have to uninstall and reinstall libusb.exe and others.

Ok, thanks to ATDTEAM, very much, I bricked by patching boot image with magisk and flashing it, successfully flashed stock rom .ofp with SP Flash tool, not only this , I itentionally flashed another version , and it worked to, thnx to the bypass utility, it generates questions, the realme provides ozip files, so where are .ofp files coming from, or where we can get it, and... Fawazahmed0 , I am unable to flash twrp, I tried everything I could, I am on updated Android 10 c.19 now, so I can't flash custom recovery or root it... I can't even rollback bcoz I unable to find the older version ofp files, the ozip files just don't install, so please help for rooting Android 10, You have solved a major hurdle by introducing the method of bypass sp tool flashing but, the next step of flashing custom recovery and then rooting awaits... Pls help/ guide, Thnx...

Thanks brother, I've recently unbricked my device