Related
every time when i reach the adb shell line, it shows error: device not found.
briefly, the Inc2 i have is S-ON with unlocked bootloader and recovery installed.
i flashed a custom ROM without noting that I am S-ON.
now the device is stock at HTC logo.
the BIG problem here, i tried more than 10 stock images (PG32IMG.zip) with no hope, everything it shows the below progress bar in the top right corner and do nothing.
i tried to downgrade with this tool, but its shows device not found, noting that everything is OK with the driver and adb staff, i can see the phone in the device manager as My HTC and if write the command "fastboot reboot-botloader" it reboot!! thats mean its connected.
HELP PLEASE,ANY THOUGHTS , i spend more than 4 days looking, i downloaded more than 5 GB of files with no hope
Dear MOD, if it in the wrong section please move it to the proper one
This should be in General but I'll say this: I have rooted 3 vivows (including mine) with various versions of HTC/Verizon's garbage stock ROM. Carefully following this guide worked perfectly each time:
http://forum.xda-developers.com/showthread.php?t=1298990
Do NOT use HTC's unlock on their dev website as it does not gain S-OFF so you can't use non-HTC Sense based ROMs and you'll end up relocking your phone to gain S-OFF. Use only the guide linked above.
ph1nn said:
This should be in General but I'll say this: I have rooted 3 vivows (including mine) with various versions of HTC/Verizon's garbage stock ROM. Carefully following this guide worked perfectly each time:
http://forum.xda-developers.com/showthread.php?t=1298990
Do NOT use HTC's unlock on their dev website as it does not gain S-OFF so you can't use non-HTC Sense based ROMs and you'll end up relocking your phone to gain S-OFF. Use only the guide linked above.
Click to expand...
Click to collapse
thanks for the reply.
i already unlocked the bootloader through htcdev.
i read the thread for the downgrade but the problem is when i do the first step in the cmd it shows error: device not found, noting that he you type the fastboot rebbot it reboot successfully !!
all i i need is to install this ROM because it support GSM
http://forum.xda-developers.com/showthread.php?t=1553357
you can't use adb because most likely it isn't enabled on your device. It might also be because you didn't wipe cache/dalvik and install the newest radio. I remember that being a big problem.
It could also be that you flashed a rom without flashing the boot.img since you aren't S-off. Im pretty sure if you're S-on you need to flash the boot.img of the rom first then flash the rom. I don't remember what the command is using fastboot but i'm sure you can find it.
If none of this works, then i would factory reset and then have your phone reupgrade to stock and start the process all over.
Good luck
rshift said:
you can't use adb because most likely it isn't enabled on your device. It might also be because you didn't wipe cache/dalvik and install the newest radio. I remember that being a big problem.
It could also be that you flashed a rom without flashing the boot.img since you aren't S-off. Im pretty sure if you're S-on you need to flash the boot.img of the rom first then flash the rom. I don't remember what the command is using fastboot but i'm sure you can find it.
If none of this works, then i would factory reset and then have your phone reupgrade to stock and start the process all over.
Good luck
Click to expand...
Click to collapse
yeah, this is the point, i can't use adb or even flash boot.img from fastboot
the command is fastboot flash boot boot.img
and i cant perform a factory rest a member advised me to relock the bootloader and start all over.
but the question here, how to RELOCK??
abudraih said:
yeah, this is the point, i can't use adb or even flash boot.img from fastboot
the command is fastboot flash boot boot.img
and i cant perform a factory rest a member advised me to relock the bootloader and start all over.
but the question here, how to RELOCK??
Click to expand...
Click to collapse
I did this once on a friends Vivow, basically you just reverse the locking instructions on the htcdev website. It's something simple like: "fastboot oem lock". It's on the htcdev website if i recall.
But yea, NEVER use that garbage HTC unlock site, what you want is the HBOOT downgrade link I provided above, but first you gotta relock your phone.
Thanks my lovely XDA members , PROBLEM SOLVED
In the same problem
abudraih said:
Thanks my lovely XDA members , PROBLEM SOLVED
Click to expand...
Click to collapse
hi I have read all that you're written and your conversation cus I'm in the same certain point of the problem, I have tried and done everything... I do not want to do...
I just want what you did to solved this big issue.
Help!!!
---------- Post added at 06:56 PM ---------- Previous post was at 06:45 PM ----------
jjdelarosa said:
hi I have read all that you're written and your conversation cus I'm in the same certain point of the problem, I have tried and done everything... I do not want to do...
I just want what you did to solved this big issue.
Help!!!
Click to expand...
Click to collapse
I'm running Verizon 2.3.4 S-ON hoot 0.98
jjdelarosa said:
hi I have read all that you're written and your conversation cus I'm in the same certain point of the problem, I have tried and done everything... I do not want to do...
I just want what you did to solved this big issue.
Help!!!
---------- Post added at 06:56 PM ---------- Previous post was at 06:45 PM ----------
I'm running Verizon 2.3.4 S-ON hoot 0.98
Click to expand...
Click to collapse
Simply re-lock your bootloader through HTC Dev and then flash the RUU or the stock image
abudraih said:
Simply re-lock your bootloader through HTC Dev and then flash the RUU or the stock image
Click to expand...
Click to collapse
Thanks, slo sorry if I'm disturbing... I have read on http://forum.xda-developers.com/showthread.php?t=2037421 that Execute the command "fastboot oem lock"will relock the phone back. But I've changed the recovery, does it will affect or it's okey with phone?
I have read and done a lot of commands and nothing happen.
But Any way I will do and let you know the result.
jjdelarosa said:
Thanks, slo sorry if I'm disturbing... I have read on http://forum.xda-developers.com/showthread.php?t=2037421 that Execute the command "fastboot oem lock"will relock the phone back. But I've changed the recovery, does it will affect or it's okey with phone?
I have read and done a lot of commands and nothing happen.
But Any way I will do and let you know the result.
Click to expand...
Click to collapse
Hi, Finally, I'm S-off, Bue Now I have a problema, I install the original Ruu and several custom Rom, all of them, the Signal doesn't work, it;s still NO service, even I installed different Radio from this page
http://forum.xda-developers.com/showthread.php?t=1134451
Let Me know What do I have to do?
Guys,
I urgently need assistance, I really need to have my mobile working very soon!
Heres my issue!
BOOTLOADER IS RELOCKED
and every command I run, I get the following ..
Sending Unlock_code.bin = FAILED DATA TO LARGE
trying to reinstall clockwork
Sending BOOT , then it says FAILED REMOTE not allowed
I am absolutely stuck in the bootloader loop with no recovery or any .IMG working.
Yes I have searched high and low to help me out all day literally all day and it's been stressing me out alot!
Please help!!
Kind regards
SOLVED MY PROBLEM AND MANY OTHERS MIGHT GET HELP FROM THIS.
First of all if you are having the issue I have please follow the next steps.
If you notice when you are in the Bootloader it will say RELOCKED ** SECURITY WARNING ** if so
Run this bat file with the cable connected until the ** SECURITY WARNING DISAPPEARS ** - http://www.speedyshare.com/b3WsH/Fas...y-recharge.bat
It should disappear after one reboot of charging when it does remove the cable and close the BAT file
Reconnect the cable and open a fastboot cmd window and run the "" fastboot flash unlocktoken Unlock_code.bin "" this will then allow write access and you should be able to use your phone again! my CM10 rom is still working and etc
Hope this helps for other people, please message me if i wasn't clear enough in above.
Jadc007 said:
Guys,
I urgently need assistance, I really need to have my mobile working very soon!
Heres my issue!
BOOTLOADER IS RELOCKED
and every command I run, I get the following ..
Sending Unlock_code.bin = FAILED DATA TO LARGE
trying to reinstall clockwork
Sending BOOT , then it says FAILED REMOTE not allowed
I am absolutely stuck in the bootloader loop with no recovery or any .IMG working.
Yes I have searched high and low to help me out all day literally all day and it's been stressing me out alot!
Please help!!
Kind regards
Click to expand...
Click to collapse
you can't flash anything from fastboot if you have locked/relocked bootloader,
glukosio said:
you can't flash anything from fastboot if you have locked/relocked bootloader,
Click to expand...
Click to collapse
ah bugger, can you advise in what I can do please?
I have tried the RUU but it comes with the 140 ERROR
I am really screwing right now, last time I try and root something obviously not meant for me!
Cheers guys
usually when you have error 140 is because you have wrong hboot version (you have to be lower or the same than ruu),
watch in bootloader what hboot do you have and then download ruu from here http://htcruu.com/?dir=Endeavor
check if you have a branded phone or not, and which region (europe, asia...) and download the right one then try again
glukosio said:
usually when you have error 140 is because you have wrong hboot version (you have to be lower or the same than ruu),
watch in bootloader what hboot do you have and then download ruu from here http://htcruu.com/?dir=Endeavor
check if you have a branded phone or not, and which region (europe, asia...) and download the right one then try again
Click to expand...
Click to collapse
Thank you so much for replying with great info!
I am on O2 network and the following details are :
ENDEAVORU
HBOOT-1.12.0000
RADIO-1.1204.90.13
can you let me know which one from that link you post would be mine? as I can only see one O2 link.
At the moment I am charging the phone via that BATCH file that constantly reboots the phone so it's taking a while!
thank you so much again for replying, my family can't even contact me at the moment how important it is!
Cheers buddy
The one I used was RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed.exe but this one gave me the error code!
thank you guys
Jadc007 said:
The one I used was RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed.exe but this one gave me the error code!
thank you guys
Click to expand...
Click to collapse
Bump
Jadc007 said:
The one I used was RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed.exe but this one gave me the error code!
thank you guys
Click to expand...
Click to collapse
which error you have?
glukosio said:
which error you have?
Click to expand...
Click to collapse
The error I get using the above RUU is the 140 code ... im sure i am using the right RUU?
please help, need to contact home!
Jadc007 said:
The error I get using the above RUU is the 140 code ... im sure i am using the right RUU?
please help, need to contact home!
Click to expand...
Click to collapse
When I load the RUU.EXE it says my current version is 2.17 and obviously the above RUU is older and I think this is why it does not work,
can anybody suggest something please?!
Jadc007 said:
When I load the RUU.EXE it says my current version is 2.17 and obviously the above RUU is older and I think this is why it does not work,
can anybody suggest something please?!
Click to expand...
Click to collapse
error 140 is usually with wrong hboot version, so try do download newer version,
glukosio said:
error 140 is usually with wrong hboot version, so try do download newer version,
Click to expand...
Click to collapse
But as I may of said already, I cannot find a RUU that is 2.17 or above for my phone they are all below any idea's where I can get an 2.17 RUU ?
Kind regards
James
thanks again
Anyone help me at all? still stuck
Jadc007 said:
Anyone help me at all? still stuck
Click to expand...
Click to collapse
There is the possibility that the RUU for you is not released .... yet.
Can you unlock your bootloader again with the HTC dev site, did u try that ?
Verstuurd van mijn HTC One X
MarcelHofs said:
There is the possibility that the RUU for you is not released .... yet.
Can you unlock your bootloader again with the HTC dev site, did u try that ?
Verstuurd van mijn HTC One X
Click to expand...
Click to collapse
Yea this is what I am thinking mate, I tried the unlocking procedure again all I got was an error in the fastboot, won't allow me to keep getting the FAILED command write and etc (Unknown error)
I have got a RUU but it's a europe one but it obviously will not work for my O2 network I believe
Jadc007 said:
Guys,
I urgently need assistance, I really need to have my mobile working very soon!
Heres my issue!
BOOTLOADER IS RELOCKED
and every command I run, I get the following ..
Sending Unlock_code.bin = FAILED DATA TO LARGE
trying to reinstall clockwork
Sending BOOT , then it says FAILED REMOTE not allowed
I am absolutely stuck in the bootloader loop with no recovery or any .IMG working.
Yes I have searched high and low to help me out all day literally all day and it's been stressing me out alot!
Please help!!
Kind regards
Click to expand...
Click to collapse
SOLVED MY PROBLEM AND MANY OTHERS MIGHT GET HELP FROM THIS.
First of all if you are having the issue I have please follow the next steps.
If you notice when you are in the Bootloader it will say RELOCKED ** SECURITY WARNING ** if so
Run this bat file until the ** SECURITY WARNING DISAPPEARS ** - http://www.speedyshare.com/b3WsH/Fastboot-battery-recharge.bat
It should disappear after one reboot of charging when it does remove the cable and close the BAT file
Reconnect the cable and open a fastboot cmd window and run the "" fastboot flash unlocktoken Unlock_code.bin "" this will then allow write access and you should be able to use your phone again! my CM10 rom is still working and etc
Hope this helps for other people, please message me if i wasn't clear enough in above.
You are a lifesaver mate, that pulled me out of a big hole.
jag233 said:
You are a lifesaver mate, that pulled me out of a big hole.
Click to expand...
Click to collapse
Glad I could be of some assistance for you and you are welcome buddy
Hey, sorry to bring this up again, but I did what the OP said. I unlocked the the bootloader again, and got rid of the security warning, but I still cannot get past the "htc quietly brilliant" screen. Factory reseting won't work, and recovery will just reboot the device only to get it stuck the way I mentioned before. Any help, anyone?
mortix02 said:
Hey, sorry to bring this up again, but I did what the OP said. I unlocked the the bootloader again, and got rid of the security warning, but I still cannot get past the "htc quietly brilliant" screen. Factory reseting won't work, and recovery will just reboot the device only to get it stuck the way I mentioned before. Any help, anyone?
Click to expand...
Click to collapse
Install this recovery use command fastboot flash recovery recovery.img take the recovery.img inside the zip arhive
after this mount your sd card copy rom of your chice and flash it via recovery don't forget to flash boot.img inside the rom arhive with command fastboot flash boot boot.img
Please note you must be bootloader unlocked and S-OFF for this to work
you are doing this at your own risk dont blame me if something goes wrong i have tested this twice one on CM and once on Stock
that being said
This guide will help you return to stock un-rooted, locked, and s-on in the event you ever need to use the warranty
You will need the decrypted RUU from here
http://forum.xda-developers.com/sho...pers.com/showpost.php?p=46153741&postcount=31
I recommend copy and paste for the command so you don’t mistype something
This will lock your bootloader and make it show LOCKED not RELOCKED
While still in the bootloader type
Code:
Fastboot oem rebootRUU
Once in ruu mode *blackscreen with HTC text* its time to flash the decrypted ruu make sure you have placed the rom in the folder and named it Rom.zip
Run following command
Code:
Fastboot flash zip Rom.zip
It appears some people are confused on the following. You must confirm your device successfully flashes the ruu before contiuning
It could work the first time or could error out multiple times typically it fails the first time then completes the 2nd bu not a promise also make sure you have checked the md5 hash
You will most likely get the following error
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
Don’t worry this is normal (typically fails the first time) (also it could boot you out of ruu mode when it does) just make sure your phone still shows its in ruu mode
If it is not just retype
Code:
fastboot oem rebootRUU
Then re-run the command
Code:
Fastboot flash zip Rom.zip
Once it finishes the phone will stay in ruu mode simply type
Code:
Fastboot reboot-bootloader
At this point you are stock unrooted and bootloader locked but still s-off to change this type
Code:
fastboot oem writesecureflag 3
you should get a message back saying
“(bootloader) writesecureflag: partitions signature pass
OKAY [ 1.666s]
finished. total time: 1.666s”
now type
fastboot reboot-bootloader
and verify you are now S-ON andtype
Code:
fastboot reboot
and your phone will load to stock
note this will be stock version m7wlv_1.10.605.8 so you will need to take the ota to update to 605.10
hope this helps
Thanks for this!
Fantastic Post
Thanks so much for this.
Frankie1588 said:
Thanks for this!
Click to expand...
Click to collapse
godhamba said:
Thanks so much for this.
Click to expand...
Click to collapse
hope it helps i did it twice before making the post to make sure dont wanna lead anyone down wrong direction
bmt626 said:
hope it helps i did it twice before making the post to make sure dont wanna lead anyone down wrong direction
Click to expand...
Click to collapse
I need HELP! I read the BIG RED PRINT about being bootloader unlocked but I still foolishly locked the bootloader prior to running this......I'm still S-Off but it will not flash the RUU. And now it is in a boot loop into recovery. I've tried running the lock unlock ADB scipt but I can't seem to get the device to connect in ADB mode.....fastboot works fine.
Hopefully I don't have a nice looking paper weight.
and BTW the reason i locked the BL is because I was reading other info on the web ( Youtube ) and got in a hurry.....LET THIS BE A REMINDER.
tpierce67 said:
I need HELP! I read the BIG RED PRINT about being bootloader unlocked but I still foolishly locked the bootloader prior to running this......I'm still S-Off but it will not flash the RUU. And now it is in a boot loop into recovery. I've tried running the lock unlock ADB scipt but I can't seem to get the device to connect in ADB mode.....fastboot works fine.
Hopefully I don't have a nice looking paper weight.
and BTW the reason i locked the BL is because I was reading other info on the web ( Youtube ) and got in a hurry.....LET THIS BE A REMINDER.
Click to expand...
Click to collapse
You do need to lock the bootloader at one point in my guide
What command did you run to lock the boot loader
Adb only works when booted in to a os
My advice is boot into bootloader then flash a custom recovery and flash cm from cm run unlock command in adb and try again following my directions
Sent from my HTC6500LVW using Tapatalk now Free
Thanks for the assit. I ran fastoot oem lock as the first step. I saw a couple of vids on youtube with those instructions. I will try your suggestions and see what happens. I left the phone at work cause I have iMac at home and I figured it was a paper weight at this point. Hopefully I will have better luck tomorrow.
tpierce67 said:
Thanks for the assit. I ran fastoot oem lock as the first step. I saw a couple of vids on youtube with those instructions. I will try your suggestions and see what happens. I left the phone at work cause I have iMac at home and I figured it was a paper weight at this point. Hopefully I will have better luck tomorrow.
Click to expand...
Click to collapse
just run this command from an
Code:
adb shell
su
echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
that should make it read unlocked again i ran fastboot oem lock when i was first testing and that command got me back
tpierce67 said:
Thanks for the assit. I ran fastoot oem lock as the first step. I saw a couple of vids on youtube with those instructions. I will try your suggestions and see what happens. I left the phone at work cause I have iMac at home and I figured it was a paper weight at this point. Hopefully I will have better luck tomorrow.
Click to expand...
Click to collapse
let me know if you have issues ill be happy to help out
This is what i get when i try to flash a customer reovery
C:\Fastboot>fastboot flash recovery ope
sending 'recovery' (8504 KB)...
OKAY [ 1.156s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.987s
I need to find a way to unlock the bootloader. I'm stuck in bootloader mode.
---------- Post added at 02:15 PM ---------- Previous post was at 02:07 PM ----------
my bootloader screen reads
tampered
relocked
security warning
M7_WLV PVT SHIP S-ON RH
I'm not sure what happened since yesterday but I left my office it still read S-Off. I tried to install Rummrunner but since I can't enable USB debugging it won't flash.
tpierce67 said:
This is what i get when i try to flash a customer reovery
C:\Fastboot>fastboot flash recovery ope
sending 'recovery' (8504 KB)...
OKAY [ 1.156s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.987s
I need to find a way to unlock the bootloader. I'm stuck in bootloader mode.
---------- Post added at 02:15 PM ---------- Previous post was at 02:07 PM ----------
my bootloader screen reads
tampered
relocked
security warning
M7_WLV PVT SHIP S-ON RH
I'm not sure what happened since yesterday but I left my office it still read S-Off. I tried to install Rummrunner but since I can't enable USB debugging it won't flash.
Click to expand...
Click to collapse
Use your unlock token
Sent from my One using xda app-developers app
123421342 said:
Use your unlock token
Sent from my One using xda app-developers app
Click to expand...
Click to collapse
Thank you for the reply. I used rummrunners method for unlock and S-Off. My HTC One is a Verizon model and not unlockable on the HTCdev website. so I don't have a token.
@tpierce67 - did you try the echo command he mentioned a few posts back to get it to read unlocked again? Edit: I think it just now clicked (re-read through for the 3rd time) why you probably weren't able to run that command... no custom recovery, no rom, no adb...
@bmt626 - so I take it SuperCID isn't necessary before running this?
jntdroid said:
@tpierce67 - did you try the echo command he mentioned a few posts back to get it to read unlocked again?
@bmt626 - so I take it SuperCID isn't necessary before running this?
Click to expand...
Click to collapse
Nope I left my Cid as vzw
Sent from my HTC6500LVW using Tapatalk now Free
Does this only work if you have the unlock token? or are you able to use this method if you used RumRunner Method to get S-Off?
kobusestas said:
Does this only work if you have the unlock token? or are you able to use this method if you used RumRunner Method to get S-Off?
Click to expand...
Click to collapse
I would assume both but I only used rumrunner I don't have an unlock token
Sent from my HTC6500LVW using Tapatalk now Free
bmt626 said:
I would assume both but I only used rumrunner I don't have an unlock token
Sent from my HTC6500LVW using Tapatalk now Free
Click to expand...
Click to collapse
And it worked for you without having the unlock token? My goal is to simply have the option to return to S-ON stock Locked in case I ever needed it. I used RumRunner to unlock my device.
I was able to do this without issues.. but It's showing tampered and I have no custom recovery?
Am I screwed for now? Or is there anything additional I can do? PC won't read it.. and it won't boot..
I have the option for recovery but it kicks me back out to fastboot..
jntdroid said:
@tpierce67 - did you try the echo command he mentioned a few posts back to get it to read unlocked again? Edit: I think it just now clicked (re-read through for the 3rd time) why you probably weren't able to run that command... no custom recovery, no rom, no adb...
@bmt626 - so I take it SuperCID isn't necessary before running this?
Click to expand...
Click to collapse
The Echo command is an ADB command and I can't get that far. I'm running out of options.
@bmt626 - thanks again for this... I'm about to run it, but have one random, anal question... do you see any reason at all that I would need my sim in and the phone activated for this to work? I can't think of one, but just wanted to throw it out there to make myself feel better before running this
Hello,
My HTC One will not unlock relocked bootloader using fastboot oem get_identifier_token
The error is as follows:
C:\adb>fastboot oem get_identifier_token
...
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.061s]
finished. total time: 0.062s
Please Help me my phone will also not take an RUU update from the EXE or Zip on sd card. It freezes on the recovery screen with red text warning. I am S-On, Re-locked and have no ROM installed at the moment.
Anyone?
lpcar04 said:
Hello,
My HTC One will not unlock relocked bootloader using fastboot oem get_identifier_token
The error is as follows:
C:\adb>fastboot oem get_identifier_token
...
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.061s]
finished. total time: 0.062s
Please Help me my phone will also not take an RUU update from the EXE or Zip on sd card. It freezes on the recovery screen with red text warning. I am S-On, Re-locked and have no ROM installed at the moment.
Click to expand...
Click to collapse
You need to go into developer options and check to allow OEM Unlocking.
ok is there any way you can help me to do that using adb as i do not have a rom installed currently and cannot get a RUU to flash completely
lpcar04 said:
ok is there any way you can help me to do that using adb as i do not have a rom installed currently and cannot get a RUU to flash completely
Click to expand...
Click to collapse
Sorry. I have no idea about that. It's a new "security" feature in 5.1 and others have been having the same problem and I don't know if anyone has been able to figure out how to unlock without running an ruu.
lpcar04 said:
ok is there any way you can help me to do that using adb as i do not have a rom installed currently and cannot get a RUU to flash completely
Click to expand...
Click to collapse
Do you have custom recovery or stock?
Does ADB work in recovery?
stock adb works in download and bootloader
stifilz said:
Do you have custom recovery or stock?
Does ADB work in recovery?
Click to expand...
Click to collapse
stock adb works in download and bootloader
jollywhitefoot said:
You need to go into developer options and check to allow OEM Unlocking.
Click to expand...
Click to collapse
Thanks given. S-off, I relocked to install update .19 and it wouldn't unlock after, with s-off I just installed twrp captain throwback and SU beta. Titanium backup pro wouldn't remove apps, and busy box pro wouldn't install. This fixed it.
Huge thanks.
On mine HTC one M9 i can not turn on, its som demo android 5.1. can i turn on som howe with adb comand?
Same here
moki_king said:
On mine HTC one M9 i can not turn on, its som demo android 5.1. can i turn on som howe with adb comand?
Click to expand...
Click to collapse
Same here bro, Please let me know if find any solution.
M9 softbricked??
So im in the same boad. I managed to lock myself out of my phone. Flashed stock recovery to update to android 6. NOW I'm stuck in bootloader. I can boot to recovery, download and oemRUU. When I try to run RUU i get the battery below 30% error but my phone says its 100% when I "power down" in recovery. when i try ADB SIDELOAD i get BL-unlock fail. runing unlocktoken the phone disply the warning andout unlocking the bootloader and i select YES then it display "set_unlock_bootloader_magic_type_fail" the phone reboots and the bootloader stays "re-locked"
I cant flash custom recovery or system without getting a "S-On" error or boot loader lock error. i can however flash "hosd". I tried the battery charge batt file but i don't get any readings running the command.
any help would be appreciated.
---------- Post added at 11:46 AM ---------- Previous post was at 11:42 AM ----------
jpwhre said:
Thanks given. S-off, I relocked to install update .19 and it wouldn't unlock after, with s-off I just installed twrp captain throwback and SU beta. Titanium backup pro wouldn't remove apps, and busy box pro wouldn't install. This fixed it.
Huge thanks.
Click to expand...
Click to collapse
how did you get S-Off without a working rom?
WarmYster said:
So im in the same boad. I managed to lock myself out of my phone. Flashed stock recovery to update to android 6. NOW I'm stuck in bootloader. I can boot to recovery, download and oemRUU. When I try to run RUU i get the battery below 30% error but my phone says its 100% when I "power down" in recovery. when i try ADB SIDELOAD i get BL-unlock fail. runing unlocktoken the phone disply the warning andout unlocking the bootloader and i select YES then it display "set_unlock_bootloader_magic_type_fail" the phone reboots and the bootloader stays "re-locked"
I cant flash custom recovery or system without getting a "S-On" error or boot loader lock error. i can however flash "hosd". I tried the battery charge batt file but i don't get any readings running the command.
any help would be appreciated.
---------- Post added at 11:46 AM ---------- Previous post was at 11:42 AM ----------
how did you get S-Off without a working rom?
Click to expand...
Click to collapse
I got s-off a week after it came out in April. The last lollipop update, htc moved the ability to unlock bootloader into developer options in phone and I didn't know, til I stumbled across this thread.
Fixed!!!
jpwhre said:
I got s-off a week after it came out in April. The last lollipop update, htc moved the ability to unlock bootloader into developer options in phone and I didn't know, til I stumbled across this thread.
Click to expand...
Click to collapse
O OK. brought my phone back from the graveyard. Found the correct RUU so all is good again.:fingers-crossed:
have you fix it? i have the same problem, please can someone help me? i don't know what i can do. my phone show me just the bootloader/download mode ecc i was s-off but i put s-on again and i have re locked my phone to update to android 6.0. please please help me.
jezzyna said:
have you fix it? i have the same problem, please can someone help me? i don't know what i can do. my phone show me just the bootloader/download mode ecc i was s-off but i put s-on again and i have re locked my phone to update to android 6.0. please please help me.
Click to expand...
Click to collapse
Make sure the RUU is the correct one matching the CID of your phone
change the name of the RUU to 0PJAIMG.ZIP and put it on SDCard then reboot to download mode
should be yellow text at bottom of screen (volume up to flash volume down to cancel)
(make sure SD card is fat32 and the 0PJAIMG zip file is the only thing on the card)
Have a look in the link for RUU
http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Mr Troop said:
Make sure the RUU is the correct one matching the CID of your phone
change the name of the RUU to 0PJAIMG.ZIP and put it on SDCard then reboot to download mode
should be yellow text at bottom of screen (volume up to flash volume down to cancel)
(make sure SD card is fat32 and the 0PJAIMG zip file is the only thing on the card)
Have a look in the link for RUU
http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Click to expand...
Click to collapse
there was installed the 2.10.771.2 version so, i'm going to download this version?
i'm so confused i want to fix it asap i want my mobile back
jezzyna said:
there was installed the 2.10.771.2 version so, i'm going to download this version?
i'm so confused i want to fix it asap i want my mobile back
Click to expand...
Click to collapse
I found this one,third one in list 1.32.771.15
http://androidruu.com/?developer=M9
lpcar04 said:
Hello,
My HTC One will not unlock relocked bootloader using fastboot oem get_identifier_token
The error is as follows:
C:\adb>fastboot oem get_identifier_token
...
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.061s]
finished. total time: 0.062s
Please Help me my phone will also not take an RUU update from the EXE or Zip on sd card. It freezes on the recovery screen with red text warning. I am S-On, Re-locked and have no ROM installed at the moment.
Click to expand...
Click to collapse
hey bro any help yet? im currently s-on, RELOCKED and running stock rom. i've been trying to get the marshmallow update but i think im stuck now.
Suavie103 said:
hey bro any help yet? im currently s-on, RELOCKED and running stock rom. i've been trying to get the marshmallow update but i think im stuck now.
Click to expand...
Click to collapse
You have to enable developers options Easter egg. Go to settings/about/software information/more and keep tapping build number. You will get a toast notification telling you to tap "X#" times to enable until you see "developer mode (blah blah blah)" Go back to settings and you'll see developers options. Open it and check "allow unlock bootloader"
If you can't get marshmallow, reboot to bootloader. Check software status at top. If it says modified you won't take OTA. Back up your device internal storage to pc and flash lolipop ruu.exe and if that doesn't take, find stock ruu thread and put lolipop on sd card and reboot to download mode. This will reset status to "official" and allow you to take both parts of OTA for marshmallow. This method will wipe your entire device including internal storage (thus need for backup to pc prior)
HTC backup has been discontinued in marshmallow. You can restore from, but Google picks up backup on marshmallow.
Hello Ladies and gentlemen, please I need help here.... My HTC 10 is brick and I'm trying to unbrick it but can't for these reasons:-
1-locked bootloader, S-ON
2-stock recovery is not there... Can't open it
3-downloading mode is not working too, doesn't open
4-bootloader opens fine , I tried using fast boot to flash the stock RUU but it's saying "can't while S-ON)
5- tried the official RUU exe , not working because it keeps on saying (battery less than 30%) , now plz don't tell me to charge it cause İTS CHARGED!! But the problem is that there is a bug where fast boot can't read the battery ... Getvar command will give you (nothing) (empty)... That's why RUU still says "battery less than 30%"
I tried EVERY thread on the internet , nothing works unfortunately!
Please people help :crying:
I don’t know this battery problem. But try resetting or recalibrating battery .
1) Connect the phone to wall charger for 10 mins.
2) with the switch turned off and phone power off
Press and hold volume up and down button ( both volume button ) and power button for 2 min and leave all the button .
3) charge it full / or for long period , probably 3-4 hrs
4) try flashing ruu now.
Sent from my iPhone using Tapatalk
Ill try and reply back
Shree.bhagwat said:
I don’t know this battery problem. But try resetting or recalibrating battery .
1) Connect the phone to wall charger for 10 mins.
2) with the switch turned off and phone power off
Press and hold volume up and down button ( both volume button ) and power button for 2 min and leave all the button .
3) charge it full / or for long period , probably 3-4 hrs
4) try flashing ruu now.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
thanks bro, ill try it and reply back ^^
Unlock bootloader
Find your stock recovery.img version
Put your HTC on bootloader mode (dont need download mode)
Flash Stock recovery via ADB (command: fastboot flash recovery name_of_recovery.img)
Flash RUU via MicroSD card
Relock bootloader
eriktirador said:
Unlock bootloader
Find your stock recovery.img version
Put your HTC on bootloader mode (dont need download mode)
Flash Stock recovery via ADB (command: fastboot flash recovery name_of_recovery.img)
Flash RUU via MicroSD card
Relock bootloader
Click to expand...
Click to collapse
I can't, because debugging mode is off and "unlock bootloader" in settings is off too... And I can't boot up to system as it's brick :'(... But thanks for the reply anyway, anymore ideas?
eriktirador said:
Unlock bootloader
Find your stock recovery.img version
Put your HTC on bootloader mode (dont need download mode)
Flash Stock recovery via ADB (command: fastboot flash recovery name_of_recovery.img)
Flash RUU via MicroSD card
Relock bootloader
Click to expand...
Click to collapse
Once unlocked your bootloader please NEVER relock it....it has no purpose. All you do is lock yourself out of your device once in trouble. Worst advice ever.
Mr Hofs said:
Once unlocked your bootloader please NEVER relock it....it has no purpose. All you do is lock yourself out of your device once in trouble. Worst advice ever.
Click to expand...
Click to collapse
I have a relocked bootloader with S-ON before downgrade from oreo and have not issues
Sorry my bad english
eriktirador said:
I have a relocked bootloader with S-ON before downgrade from oreo and have not issues
Sorry my bad english
Click to expand...
Click to collapse
Many people don't know that relocking the BL doesnt do any good. If your device is not completely stock and you relock the BL you are screwed!!!
You can flash ruu files with an unlocked BL, you can update officially with an unlocked BL, it has no value what so ever to relock it. Believe me, I know this stuff !
---------- Post added at 07:34 PM ---------- Previous post was at 07:31 PM ----------
eriktirador said:
Unlock bootloader
Find your stock recovery.img version
Put your HTC on bootloader mode (dont need download mode)
Flash Stock recovery via ADB (command: fastboot flash recovery name_of_recovery.img)
Flash RUU via MicroSD card
Relock bootloader
Click to expand...
Click to collapse
And why so many unnecessary steps, no need to flash a stock recovery before a ruu, the ruu does it for you.
Barayaghi said:
Hello Ladies and gentlemen, please I need help here.... My HTC 10 is brick and I'm trying to unbrick it but can't for these reasons:-
1-locked bootloader, S-ON
2-stock recovery is not there... Can't open it
3-downloading mode is not working too, doesn't open
4-bootloader opens fine , I tried using fast boot to flash the stock RUU but it's saying "can't while S-ON)
5- tried the official RUU exe , not working because it keeps on saying (battery less than 30%) , now plz don't tell me to charge it cause İTS CHARGED!! But the problem is that there is a bug where fast boot can't read the battery ... Getvar command will give you (nothing) (empty)... That's why RUU still says "battery less than 30%"
I tried EVERY thread on the internet , nothing works unfortunately!
Please people help :crying:
Click to expand...
Click to collapse
1: shame it's locked.
2: stock recovery is probably there but you need a button combo to enter it, you probably see some kind of exclamation sign ?
3: you say it doesn't open....means what ? Does the device start bootlooping, does it reboot to the bootloader ?
4: did you try to flash a ruu.zip in "ruu mode" ? (google for the exact fastboot command to enter ruu mode)
5: nothing to say about that.