Develop Bugs

ViperX rom small issue, help !

Hello all
I have an issue after I installed ViperX 3.3.1 rom to my device
Hboot 1.36
CID htc__044
Android version 4.1.1
Radio shown in bootloader 5.1204.162.29 and in settings unknown baseband
Frimware 3.14.707.24
and I follow all the steps in the in the official tread
http://forum.xda-developers.com/showthread.php?t=2087443
Make sure your that your HBOOT is 1.31 or greater
Check if you CID is supported, visit http://forum.xda-developers.com/show....php?t=1957376 for updates. Cheers Mike
Unlock your bootloader via HTCDev and install a custom recovery.
Download the ROM and place it on your virtual SD card.
Do a nandroid backup!
Extract boot.img from ROM zip and flash it using ‘fastboot flash boot boot.img’.
Use 'fastboot erase cache' to avoid boot issues.
Go into recovery and install the ROM.
Please choose fullwipe if you are asked, highly recommended if you go from one rom from another rom.
Reboot the device and enjoy!
Click to expand...
Click to collapse
after I finished all the step correctly, no longer signal in the device, I unroot the device again and I flash this frameware and he signal comes back again RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed.
I think the issues with the root.img file, because after i flashed the problem start to appear before installing the rom even
Thanks for your help..

Mansourali said:
Hello all
I have an issue after I installed ViperX 3.3.1 rom to my device
Hboot 1.36
CID htc__044
Android version 4.1.1
Radio shown in bootloader 5.1204.162.29 and in settings unknown baseband
Frimware 3.14.707.24
and I follow all the steps in the in the official tread
http://forum.xda-developers.com/showthread.php?t=2087443
after I finished all the step correctly, no longer signal in the device, I unroot the device again and I flash this frameware and he signal comes back again RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed.
I think the issues with the root.img file, because after i flashed the problem start to appear before installing the rom even
Thanks for your help..
Click to expand...
Click to collapse
why you don't ask in related thread? like the viperX thread? they can help you better....but what are you want to say us? that you don't have with viperX rom signal but with stock rom`? or what do you want to say us...

Odp: ViperX rom small issue, help !
During the installation it's asking If you are using custom kernel, just pick no and you should have signal ( if you pick yes it won't flash kernel modules, therefore no gsm/WiFi)

Yasounet said:
During the installation it's asking If you are using custom kernel, just pick no and you should have signal ( if you pick yes it won't flash kernel modules, therefore no gsm/WiFi)
Click to expand...
Click to collapse
thanks Yasounet my issue is solved !

Mansourali said:
thanks Yasounet my issue is solved !
Click to expand...
Click to collapse
I had exactly the same issue, it was driving me mad. Thank you thank you thank you. Will deffo donate! :good:

Looking for RUU cid HTC_622

Screwed up rooting my phone and I've been trying to get it back to stock but I haven't been able to find the right RUU. I've gone through http://androidfiles.org/ruu/?dir=Endeavor and tons of other forums but I haven't had any luck. Here's the info for my phone:
cid: HTC_622
HBOOT 1.36
Radio: 5.1204.162.29
Any help would be greatly appreciated

We need the main version
Fastboot getvar version-main

version-main: 3.14.708.28
Mr Hofs said:
We need the main version
Fastboot getvar version-main
Click to expand...
Click to collapse

Yeah that one is still missing in action ! You can go here
http://forum.xda-developers.com/showthread.php?t=1975140
And download the matching nandroid backup. Flash the boot.img from it, make a full wipe in the recovery and restore the nandroid :thumbup:

thanks for all your help but I'm unable to transfer stuff to my phone. It won't boot into mass storage mode even from recovery
EDIT: HBOOT link isn't working
Mr Hofs said:
Yeah that one is still missing in action ! You can go here
http://forum.xda-developers.com/showthread.php?t=1975140
And download the matching nandroid backup. Flash the boot.img from it, make a full wipe in the recovery and restore the nandroid :thumbup:
Click to expand...
Click to collapse

just checked my link works fine....why doesn't mass storage work, do you get an error ?
flash this one if you havent got this version
https://www.dropbox.com/s/guvfqd7tp8acxg6/recovery 5.8.4.0.img
then navigate to mounts & storage - mounst as usb device (last option in the list)

sorry for the big time noob question but where do you find the boot.img how do you flash the boot.img
Mr Hofs said:
just checked my link works fine....why doesn't mass storage work, do you get an error ?
flash this one if you havent got this version
https://www.dropbox.com/s/guvfqd7tp8acxg6/recovery 5.8.4.0.img
then navigate to mounts & storage - mounst as usb device (last option in the list)
Click to expand...
Click to collapse

so mass storage works ?
you have to unpack the nandroid backup to the right folder on the sdcard (its in the OP of the link i sent you) then unfold the folders and check in the files of the nandroid backup. the boot.img is in there

Yeah i just put on TWRP instead of CWM. What are the commands to flash boot.img?

Well it depends on the nandroid backup if you need twrp or cwm !
Of the nandroid backup contains a boot.img file you need cwm, if it has a boot.emmc.won file you need twrp recovery !
Fasboot flash boot boot.img
or
Fastboot flash boot boot.emmc.win

Thanks for all of your help I ended up just throwing on Android Revolution HD and sticking with TWRP recovery. I guess CWM doesn't like my phone for some reason.

Ow oke ! :thumbup:
CASE CLOSED !

HTC One cant access the phone after flashing custom rom
I tried to flash the Android Revolution HD 71.1 Rom on my HTC One M7 ul. after completing installation my phone was not starting up. It stuck on the HTC logo and kept rebooting automatically. I also tried to install the Google edition but same result it keeps rebooting.
My phone Details:
HTC One M7 UL
HBOOT- 1.56.0000
RADIO- 4A.23.3263.28
Main OD Version was: 4.20.708.10 (Before flashing custom rom, NOW NO version number)
CID Number: HTC_622
I cant turn on the phone so that i can try other custom rom. Its Rooted, Unlocked and I have CWM installed. Now all i can do is go to fastboot option.
What should I do to fix this problem... Desperately waiting for reply.

ashik_nil said:
I tried to flash the Android Revolution HD 71.1 Rom on my HTC One M7 ul. after completing installation my phone was not starting up. It stuck on the HTC logo and kept rebooting automatically. I also tried to install the Google edition but same result it keeps rebooting.
My phone Details:
HTC One M7 UL
HBOOT- 1.56.0000
RADIO- 4A.23.3263.28
Main OD Version was: 4.20.708.10 (Before flashing custom rom, NOW NO version number)
CID Number: HTC_622
I cant turn on the phone so that i can try other custom rom. Its Rooted, Unlocked and I have CWM installed. Now all i can do is go to fastboot option.
What should I do to fix this problem... Desperately waiting for reply.
Click to expand...
Click to collapse
Download a proper rom. You have the HTC ONE and NOT the ONE X ! .....you are in the wrong forum
Sent from my HTC One_M8 using XDA Premium 4 mobile app

https://mega.nz/#!d9klVJCb!wLoTUI0dXWbxEff_kmVau19PGg0q8NwgnYvAyhqCI3A
RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_HK_yuhong_2.17.708.7_Radio_2.1204.135K.20_relea
please first of all check if its for this cid cause i think even if my HOX+ enrc2b its an international HOX+ the X.XX.708.X is for endeavour not for enrc2b, anyone?

[Q] **Help Needed**- HOX stuck on logo screen after Hboot 1.36 upgrade

hey,
been tring to solve this one by my own for the last two days but with no luck
i used to run the ViperX 2.7.1 and recently decided it's time to update to 3.4.3 with JB
in order to do that i had to upgrade Hboot and the highest one for my CID: VODAP102 is 1.36 version
foolishly :crying: i haven't revert back to stock rom before doing that and while the firmeware updated the phone never gets past the logo screen, no matter what i tried: reinstalling ViperX, wiping everything and installing CM10.1, tried a nandroid restore that is compatible with my main-ver. and so on, (been thru alot of the forum pages)
the only thing i havn't tried is RUU restore but i am not sure on the proccess and dont want to brick the phone. or i'm doing things incorrectly
on the other hand i am able to lock\unlock the bootloader and recovery works as well
i understand downgrading Hboot is not an option and so i am looking for help desperatly
info:
CID: vodap102
main-ver: 3.14.161.27
radio: 5.1204.164D.30
Hboot: 1.36
recovery: CWM

Oke do this ....
Flash the boot.img from the 3.4.0 viper rom. The 3.4.3 full rom does not boot due to a small mistake somewhere.
Make a full wipe in the recovery and install the viper x 3.4.0 rom ...... that will do it.

Mr Hofs said:
Oke do this ....
Flash the boot.img from the 3.4.0 viper rom. The 3.4.3 full rom does not boot due to a small mistake somewhere.
Make a full wipe in the recovery and install the viper x 3.4.0 rom ...... that will do it.
Click to expand...
Click to collapse
using 3.4.0 boot.img with 3.4.3 rom or to install the 3.4.0 on the sd-card?

Use the 3.4.0 boot.img AND use the 3.4.0 full rom. Download it from the OP ofthe viper thread. Copy it to the phone from inside the custom recovery. It has a option in there to mount the sdcard as a usb mass storage device !!!

Mr Hofs said:
Use the 3.4.0 boot.img AND use the 3.4.0 full rom. Download it from the OP ofthe viper thread. Copy it to the phone from inside the custom recovery. It has a option in there to mount the sdcard as a usb mass storage device !!!
Click to expand...
Click to collapse
thanx alot!!!!!!!!!!
i wonder why flashing CM10.1 rom didnt work
again thanx alot

Maybe you had a older download of CM10.1 which needed a vendors installer file !
But its okay now so.....
CASE CLOSED !

Have same issue ... now downloading 3.4.0 .
better use OTA to get latest viper

HOX Hboot 0.94.0/main version 1.28.161.9 no JB?

Hi guys,
I got a HOX with CID VODAP102.
Using HBOOT 0.94.0000 and main version 1.28.161.9
Radio uknown ('none' says bootloader)
I want to update to JB, specifically CM10.1.
But i need to update my HBOOT, though can't seem to figure out how with my CID...
How would i go about this? The threads i found are either inconclusive or with different versions.
Oh yeah, this didn't work because of the CID thing:
http://forum.xda-developers.com/showthread.php?t=1924003
edit; just noticed, i already did the fastboot flash boot boot.img. So now i have a boot.img with an older version of the CM software. Which appearantly does not boot.
Thanks, Ice

are you rooted and unlocked?

matt95 said:
are you rooted and unlocked?
Click to expand...
Click to collapse
Rooted and unlocked. Been running CM10 for a while (beta's).
Device is still S-on though; but thats for all HOX's i think?

yeah, however to update your HBOOT you need to download the right firmware package for your CID here
Code:
# adb reboot bootloader
# fastboot oem lock
# fastboot oem rebootRUU
# fastboot flash zip firmware.zip
# fastboot reboot
now you need to unlock it again and flash a custom recovery... and that's it, flash whatever you want now

well that did it! at least; the phone boots again.
rebooted to bootloader and that now says hboot 1.36 which probably means i can update to 10.1.
just to be sure; i need to install CWM again, copy the boot.img and flash cm10.1?
ill try that tonight. just glad i can be reached again.. need the phone for work
Thanks!
edit; oh and unlock the bootloader again. Or is that not necessary since i should already have root access?

IceDustbin said:
well that did it! at least; the phone boots again.
rebooted to bootloader and that now says hboot 1.36 which probably means i can update to 10.1.
just to be sure; i need to install CWM again, copy the boot.img and flash cm10.1?
ill try that tonight. just glad i can be reached again.. need the phone for work
Thanks!
edit; oh and unlock the bootloader again. Or is that not necessary since i should already have root access?
Click to expand...
Click to collapse
you need to unlock the bootloader again, flash again the recovery through fastboot, full-wipe, flash the new rom nd its boot.img and that's it

Hi guys,
I have a kind of same problem but bigger, it means that I don't know how to root bcuz my phone is second hand.
My software is:
Android Revolution HD 7.1.0 by mike1986
HTC Sense 4.0
Android version 4.0.4
Additional Info:
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 0.94.0000
RADIO - 1.1204.103.14
CID - VODAP304
Versión Firmware o Bootloader: 1.28.161.9
Could someone tell me how I should do to get HTC Sense 5? I'd prefer the original firmware, but I don't mind having a root one neither.
Thanks

adr.lahoz said:
Hi guys,
I have a kind of same problem but bigger, it means that I don't know how to root bcuz my phone is second hand.
My software is:
Android Revolution HD 7.1.0 by mike1986
HTC Sense 4.0
Android version 4.0.4
Additional Info:
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 0.94.0000
RADIO - 1.1204.103.14
CID - VODAP304
Versión Firmware o Bootloader: 1.28.161.9
Could someone tell me how I should do to get HTC Sense 5? I'd prefer the original firmware, but I don't mind having a root one neither.
Thanks
Click to expand...
Click to collapse
you have a custom rom so you are already rooted. follow the instructions in post 4 above or go to this thread>>>>>http://forum.xda-developers.com/showthread.php?t=1975140 and go back to stock and your phone will update to the latest version

nogotaclue said:
you have a custom rom so you are already rooted. follow the instructions in post 4 above or go to this thread>>>>>http://forum.xda-developers.com/showthread.php?t=1975140 and go back to stock and your phone will update to the latest version
Click to expand...
Click to collapse
Thanks nogotaclue,
I will opt for go back to stock. Just I have two questions.
1. Which recovery.img should I choose? 1.26-1.29?
2. What do I have to be on mind to choose the Nandroid Stock? I have found these three on another website, and I don't know if there is any difference, basically the features in bold are what I don't understand!
- Nandroid Rom Vodafone España VODAP304
- Nandroid Rom Vodafone España 1.29 VODAP304
- Nandroid Rom Vodafone España VODAP304 [version firmware 2.17, banda base 2.1204, hboot 1.12 ROOT]
Thanks

adr.lahoz said:
Thanks nogotaclue,
I will opt for go back to stock. Just I have two questions.
1. Which recovery.img should I choose? 1.26-1.29?
2. What do I have to be on mind to choose the Nandroid Stock? I have found these three on another website, and I don't know if there is any difference, basically the features in bold are what I don't understand!
- Nandroid Rom Vodafone España VODAP304
- Nandroid Rom Vodafone España 1.29 VODAP304
- Nandroid Rom Vodafone España VODAP304 [version firmware 2.17, banda base 2.1204, hboot 1.12 ROOT]
Thanks
Click to expand...
Click to collapse
dont use any of those, you're best option is to go completely stock by using an ruu from the link I will post at the end for you. when you go to the page the ruu that you want is the 7th from the bottom, it will be version 1.28.161.9 and should be 609MB. start downloading it then there are some other things that you need to do in the meantime>>>>>http://www.androidruu.com/?developer=Endeavor make sure it matches exactly the version I have stated

[Q] bootloop on every reboot

Every time i reboot phone i get stuck in bootloop , i have to wipe cache and dalvik cache to fix this . Fixed permissions in recovery, reflashed ROM , the problem still persists. Changed ROM . the problem is still there. I was using the same ROM before , didn't have this problem before , appeared out of nowhere.
Using Insertcoin ROM currently , ElementalX kernel.
Please help.

Anyone?

Did you attempt a factory reset while running a non-stock recovery?
If so, you need to put the stock recovery back on, let it complete the reset, then put your desired recovery back. This is true even if you are using a non-stock ROM.

jshamlet said:
Did you attempt a factory reset while running a non-stock recovery?
If so, you need to put the stock recovery back on, let it complete the reset, then put your desired recovery back. This is true even if you are using a non-stock ROM.
Click to expand...
Click to collapse
No i didn't attempt factory reset from within the ROM when using non-stock recovery.
But i will flash stock recovery back to check on this issue , Thanks.

It seems your boot files are crashed, try to flash boot.img
Sent from my HTC One using Tapatalk

Not nearly enough info:
1) What hboot, radio number?
2) What OS number (on bootloader screen) or main version (on getvar all)
3) What version InsertCoin you trying to flash? What other ROMs and version?
4) What version TWRP?

redpoint73 said:
Not nearly enough info:
1) What hboot, radio number?
2) What OS number (on bootloader screen) or main version (on getvar all)
3) What version InsertCoin you trying to flash? What other ROMs and version?
4) What version TWRP?
Click to expand...
Click to collapse
Insertion 7.1.8 (ON 5.0.2 LOLLIPOP)
Build number - 4.16.401.10 CL448934
M8_UL PVT SHIP S-ON
HBOOT - 3.19.0.0000
RADIO - 1.22.213311491.08G
OPENDSP - V46.2.2-00564-M8974-FO.0811
OS - 3.32.531.2
TWRP VERSION - 2.8.7.0
i guess there is a firmware mismatch.
This is originally a t-mobile version of M8 but it is sim-unlocked and i flash international version of any rom i flash. I also have no GPS Lock problem (might get fixed because of firmware? Tried everything FasterGPS, GPS status and Toolbox, no fix)
Being S-ON, i want to upgrade the firmware. How can i do that?
Can you explain to me in steps.
I've searched and have gotten really confused in these things like -
What RUU should i download (t-mobile or international?) and in what order should i do steps like relocking bootloader and stock recovery.
Need the solution in proper steps.
Thank you.

rahulsethi said:
i guess there is a firmware mismatch.
Click to expand...
Click to collapse
Firmware mismatch is your problem, as indicated by your radio number and OS number (on bootloader screen) which both correspond to Kitkat (Android 4.4.4).
rahulsethi said:
I also have no GPS Lock problem (might get fixed because of firmware?)
Click to expand...
Click to collapse
Most likely, yes.
rahulsethi said:
This is originally a t-mobile version of M8 but it is sim-unlocked and i flash international version of any rom i flash.
Being S-ON, i want to upgrade the firmware. How can i do that?
What RUU should i download (t-mobile or international?) and in what order should i do steps like relocking bootloader and stock recovery.
Click to expand...
Click to collapse
You need to use the T-Mobile US RUU (available here).
You can only run an RUU that matches your phone's carrier ID (CID) and model ID (MID), which in your case correspond to T-Mobile US. CID and MID can only be changed with s-off (have nothing to do with the ROM your flash).
What you want to do is:
1) Backup any personal data you want to keep (RUU will wipe the phone, including internal storage).
2) Relock the bootloader with command: fastboot oem lock
3) Connect phone to PC and run the RUU (its very self explanatory, just follow the prompts). Your firmware is not updated, and you are on the stock T-MOB Lollipop ROM, and stock recovery.
4) To get back to InsertCoin, unlock the bootloader again using the HTCDev.com website.
5) Flash current version TWRP in fastboot.
6) Flash InsertCoin.