Hey guys, recently i tried to switch from cm10(stable) to PACman ROM. Unfortunately, it never works. I always get "flash aborted". When I flashed cm10, I flashed the at&t version and it works fine, and the PACman I'm trying to flash is the tmo one. Should i try the at&t PACman instead? Please help me guys
Oh BTW, I'm on wind if that helps
Thanks to all that help or attempt to!
Sent from my GT-N8010 using xda app-developers app
why don't you wipe? or maybe its your recovery?
mt3g said:
why don't you wipe? or maybe its your recovery?
Click to expand...
Click to collapse
I did the wipedata, cache and dalvik, i wiped everything needed, i followed all standard directions for flashing new ROMs, but nothing works. And oh, im using CWM recovery and on rom manager it says im at the latest version, so everything is up to date and everything should work but it doesnt:crying:
I had same issue too. It never worked for me if I switch from CM to PACMAN ROM. But I had it working if I flash stock ROM first then flash PACman. Any stock based ROM should work. Its a pain but you should try it. Also I used TWRP and I always wipe system too not just cache, delvik, and data. Just make sure you have nandroid. Good luck.
Edit: also I never flash PACman ROM and gapps together. Flash ROM let it boot once and go back to recovery to flash gapps..
Sent from my SGH-T999 using xda premium
myowin said:
I had same issue too. It never worked for me if I switch from CM to PACMAN ROM. But I had it working if I flash stock ROM first then flash PACman. Any stock based ROM should work. Its a pain but you should try it. Also I used TWRP and I always wipe system too not just cache, delvik, and data. Just make sure you have nandroid. Good luck.
Edit: also I never flash PACman ROM and gapps together. Flash ROM let it boot once and go back to recovery to flash gapps..
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Hey, thanks for the advice, ill try flashing back to my stock then flash PACman, hopefully that works
And also, could you teach me how to flash TWRP? Ive been meaning to replace CWM with TWRP but im kinda iffy on how to do it. Do i put the .zip on my sd and flash it through CWM and then bam, ill have TWRP?
Jaz-Crahh said:
Hey, thanks for the advice, ill try flashing back to my stock then flash PACman, hopefully that works
And also, could you teach me how to flash TWRP? Ive been meaning to replace CWM with TWRP but im kinda iffy on how to do it. Do i put the .zip on my sd and flash it through CWM and then bam, ill have TWRP?
Click to expand...
Click to collapse
Install it with goo manager.
Sent from my SGH-T999 using Tapatalk 2
Related
I rooted my phone fine. I unlocked my phone fine.
I installed clockworkmod recovery fine. I flashed clockworkmod. I backed up my rom at the stage after rooting and unlocking.
I then downloaded cyanogenmod from the app's download page. I downloaded it and installed it. I used the default selections which is "wipe delvich cache"
When I turned on my phone, it stays at the blue screen with the alien forever.
Any help on what to do? Thanks!
Reflash the ROM using these instructions. You probably wiped the wrong way.
http://forum.xda-developers.com/showthread.php?p=32532260
Sent from my SGH-T989 using xda premium
I had same problem installing cm10 with cwm. In order to get past boot animation you have to use the dark side cache wipe after flashing ROM. Ideally you should -darksidesuperwipe then flash ROM then darksidecachewipe. I like to let it boot without gapps first. Set up WiFi and all that.
Try rebooting and flash darksidecachewipe. Then reboot. I always had lingering problems until I flashed twrp. After twrp is installed there is no need for darkside scripts.
Worth it to just get twrp and redo.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
ctrlaltdeln said:
I had same problem installing cm10 with cwm. In order to get past boot animation you have to use the dark side cache wipe after flashing ROM. Ideally you should -darksidesuperwipe then flash ROM then darksidecachewipe. I like to let it boot without gapps first. Set up WiFi and all that.
Try rebooting and flash darksidecachewipe. Then reboot. I always had lingering problems until I flashed twrp. After twrp is installed there is no need for darkside scripts.
Worth it to just get twrp and redo.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Wow very informative and helpful too bad the OP could not at least give you some props and let you know he saw this and you helped him out. People panic come on here and ask questions then never come back to thank or at least acknowledge the help... Hey for that I will give you your first xda Thanks.... :good:
Try returning to stock and try again. Do things in this order: 1. Root, CWM, ETC. 2. CM7 or another 2.3 ROM (usual wipe) 3. CM9 (again, wipe)
i flashed the aokp rom and didnt like it. i tried restoring to factory and said m5 mismatch. then tried to use a jellybean rom and the installation just aborts. what do i need to flash for a jellybean or ics rom. i tried flashing the highonandroid kernal and rom and it was all succesful but the phone wouldnt turn so i restored the aokp and it works. just want something diffrent than this aokp
ritzcrakers said:
i flashed the aokp rom and didnt like it. i tried restoring to factory and said m5 mismatch. then tried to use a jellybean rom and the installation just aborts. what do i need to flash for a jellybean or ics rom. i tried flashing the highonandroid kernal and rom and it was all succesful but the phone wouldnt turn so i restored the aokp and it works. just want something diffrent than this aokp
Click to expand...
Click to collapse
Try the q&a forum. Have a mod move this
Sent from my SGH-T999 using xda app-developers app
ritzcrakers said:
i flashed the aokp rom and didnt like it. i tried restoring to factory and said m5 mismatch. then tried to use a jellybean rom and the installation just aborts. what do i need to flash for a jellybean or ics rom. i tried flashing the highonandroid kernal and rom and it was all succesful but the phone wouldnt turn so i restored the aokp and it works. just want something diffrent than this aokp
Click to expand...
Click to collapse
Transfer a ROM and COMPATIBLE kernel to your phone or sdcard. Do a FULL wipe (factory reset, cache and dcache). Install the ROM and kernel.
If that still doesn't work, use an ODIN image and flash via Odin. That'll solve the problem for sure.
Sent from my SGH-T999 using xda premium
Please read forum rules before posting
Questions go in Q&A
Development is for developers to post releases
thread moved
Thank you for your cooperation
Friendly Neighborhod Moderator
i tried flashing the highonandroid kernel and the rom and when i turned on the phone it would say galaxy s 3 then just have a black screen. do i need to flash touchwiz or something sorry for posting in the wrong section hard to navigate the forums
ritzcrakers said:
i tried flashing the highonandroid kernel and the rom and when i turned on the phone it would say galaxy s 3 then just have a black screen. do i need to flash touchwiz or something sorry for posting in the wrong section hard to navigate the forums
Click to expand...
Click to collapse
Are you sure that kernel is for the sgh t999??
Sent from my SGH-T999V using xda premium
pretty sure. do u have any suggestion or mayb a link on where to get a basic jb kernel and rom that is know to work. just so sick of the aokp the camera sux
There might be a box that you need to uncheck "md5"
Here. DL the jb stock kernel here. There is a cwm package zip so you don't have to flash the whole ROM. http://forum.xda-developers.com/showthread.php?t=1892297
Sent from my SGH-T999 using xda app-developers app
wipe data and partition system....then install the rom
so i tried flashing the jb after wiping and factory reset then installing a rom through cwm. i can flash roms? when i try to install the rom through the cwm i get error 7 installation aborted. and ideas
ritzcrakers said:
so i tried flashing the jb after wiping and factory reset then installing a rom through cwm. i can flash roms? when i try to install the rom through the cwm i get error 7 installation aborted. and ideas
Click to expand...
Click to collapse
Installation 7 usually means it was a bad download. Have you tried just restoring a backup or flashing Odin stock.
Sent from my SGH-T999 using xda app-developers app
So I was on CM10 and decided to update to the new CM10.1. My smart self decided to let the updater do it's thing and not wipe anything. I got to 10.1 without any visible problems. Then decided to wipe everything as to avoid possible future problems. After wiping, all my gapps just broke and I had to reflash them. Thats when the rest of the problems started. The gapps were still broken so I decided to wipe again and reflash both the rom and gapps. At this point I dont remember exactly but either CWM was freezing at every point or i was stuck in boot animation.
Fast forward a few days later I had to ODIN flash stock rom and trying to flash anything else just keeps me stuck in boot animation.
(Note: any CM backups keep me stuck in boot animation too)
So any help is appreciated ive tried just about everything. I also get a lot of cache errors that Im not sure of in CWM.
Sorry about the long post im fairly new to the site so i didnt know how much detail to include.
You should try TWRP and see if it works.
Ill try it and reply with results tomorrow
Sent from my SGH-T989 using xda app-developers app
danschewy said:
Ill try it and reply with results tomorrow
Sent from my SGH-T989 using xda app-develops app
Click to expand...
Click to collapse
What cwmr version are you on? If you still using the 5.x.x.x that's why(have to use the darkside wipe script). Update your recovery through ROM mananger to the latest 6.0.2.9 or to twrp through goo manager.
meekrawb said:
You should try TWRP and see if it works.
Click to expand...
Click to collapse
thanks! TWRP ftw!!
Solved
Thanks for the helps guys, TWRP worked.
Hi all. I'm going absolutely crazy over here. I have an i747 and I rooted it, no problem. The problem that I am having is that I'm currently running 4.1.2 and for the life of me, cannot figure out how to get it to 4.2. I've tried installing CM10, but every time I try and flash it in CWM, I get a E: Error in /emmc/cm10.zip (Status 7). I've tried installing other 4.2 ROMs like Paranoid Android etc, but get the same/similar error. I can flash other custom ROMs, like Alliance and such. I'm sure I'm over thinking this and just need a fresh set of eyes on the issue and a point in the right direction here. Your help is much appreciated.
What version of cwm are you running?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
jon_yarbrough said:
Hi all. I'm going absolutely crazy over here. I have an i747 and I rooted it, no problem. The problem that I am having is that I'm currently running 4.1.2 and for the life of me, cannot figure out how to get it to 4.2. I've tried installing CM10, but every time I try and flash it in CWM, I get a E: Error in /emmc/cm10.zip (Status 7). I've tried installing other 4.2 ROMs like Paranoid Android etc, but get the same/similar error. I can flash other custom ROMs, like Alliance and such. I'm sure I'm over thinking this and just need a fresh set of eyes on the issue and a point in the right direction here. Your help is much appreciated.
Click to expand...
Click to collapse
Status 7 is an out of date recovery, so make sure that's updated.
Also the newest cm10 and aokp and Pac man need updated bootleggers. Check the cm10 thread for the links to the Odin files.
http://forum.xda-developers.com/showthread.php?p=41535366
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I'm running cwm 5.5.0.4
Sent from my SAMSUNG-SGH-I747 using xda premium
jon_yarbrough said:
I'm running cwm 5.5.0.4
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Read up on what the status 7 error means. Also, I would recommend switching from CWM to TWRP.
jon_yarbrough said:
I'm running cwm 5.5.0.4
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Cwm is up to 6.0.2.8
Just needs an update.
http://forum.xda-developers.com/showthread.php?p=38962585
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Cwm is actually sitting currently at 6.0.3.1. Here is the latest cwm flashable zip: http://forum.xda-developers.com/attachment.php?attachmentid=1888710&d=1366136727
Flash this in cwm, go to advanced, select reboot recovery. Once back in, make a new backup.
Before you flash a 4.2 rom from 4.1, wipe everything. Save everything you want to an sd card or your PC. Place your desired rom and gapps on a micro sd card. Wipe data, wipe cache and dalvik. Format /system and /data. Flash rom and gapps.
xBeerdroiDx said:
Cwm is actually sitting currently at 6.0.3.1. Here is the latest cwm flashable zip: http://forum.xda-developers.com/attachment.php?attachmentid=1888710&d=1366136727
Flash this in cwm, go to advanced, select reboot recovery. Once back in, make a new backup.
Before you flash a 4.2 rom from 4.1, wipe everything. Save everything you want to an sd card or your PC. Place your desired rom and gapps on a micro sd card. Wipe data, wipe cache and dalvik. Format /system and /data. Flash rom and gapps.
Click to expand...
Click to collapse
Lol I did the same thing last time.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
Lol I did the same thing last time.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Hahaha. I thought that was you. Cheers, KorGuy!
Thanks all. I just went into ROM Manager and updated CWM to the current version of 6.0.3 and it worked like a freakin' charm. I will be sure to hit THANKS for you all. Thanks again.
xBeerdroiDx said:
Cwm is actually sitting currently at 6.0.3.1. Here is the latest cwm flashable zip: http://forum.xda-developers.com/attachment.php?attachmentid=1888710&d=1366136727
Flash this in cwm, go to advanced, select reboot recovery. Once back in, make a new backup.
Before you flash a 4.2 rom from 4.1, wipe everything. Save everything you want to an sd card or your PC. Place your desired rom and gapps on a micro sd card. Wipe data, wipe cache and dalvik. Format /system and /data. Flash rom and gapps.
Click to expand...
Click to collapse
It's actually 6.0.3.2 now, but you have to build it yourself to get it as the latest released version is still 6.0.3.1.
https://github.com/CyanogenMod/andr...mmit/6f8d24d326258f2293436c50caca1c50eccab329
klin1344 said:
It's actually 6.0.3.2 now, but you have to build it yourself to get it as the latest released version is still 6.0.3.1.
https://github.com/CyanogenMod/andr...mmit/6f8d24d326258f2293436c50caca1c50eccab329
Click to expand...
Click to collapse
:laugh:
It's not a release until it's released.
Cheers, klin
I was using the latest alpha of CM11, then i i wanted to get back to CM10.2, i did all i had to do (wipes, and stuff) and when starting up, the phone frezees and keep on doing this...
I also have searched about this issue and found no answer.
tpag02 said:
I was using the latest alpha of CM11, then i i wanted to get back to CM10.2, i did all i had to do (wipes, and stuff) and when starting up, the phone frezees and keep on doing this...
I also have searched about this issue and found no answer.
Click to expand...
Click to collapse
Have you tried booting to recovery, then doing an advanced wipe (system/data/cache/dalvik) and reflashing rom/gapps?
What version of recovery are you using?
Almite said:
Have you tried booting to recovery, then doing an advanced wipe (system/data/cache/dalvik) and reflashing rom/gapps?
What version of recovery are you using?
Click to expand...
Click to collapse
yes, i have. I also got back to stock, used an older recover, flashed with an older version of CM and nothing. I first was using CWM 6.0.3.7., after that I used 6.0.4.3, then an older version of TWRP but nothing. I also tried booting to system without flashing gapps.
With stock ROM everything works just fine.
Just wipeout internal and external card once and than install with twrp 2.6.1.0. And don't forget to say thanks
Sent from my SGH-T989 using xda app-developers app
iamdofus said:
Just wipeout internal and external card once and than install with twrp 2.6.1.0. And don't forget to say thanks
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Well, thank you, but it didn´t work.
it happened to me the same thing months ago. never had solution. still in waiting. attempt internal and external SD format. and followed the same. I hope someday they can come up with the solution! : (
i have the same problem too
I try to install multiple ROM 4.2.2 and I could only install one version AOKP Milstone JB1. I also worked the other. however all 4.1.2 rom if I worked. I could not install any 4.3 and 4.4 now does not know what is the problem but I've tried everything! anyone found the solution yet but I see I'm not the only one! (excuse my bad English, not my language )
Well you all are right, I am also using shadow mastery (stock rooted rom). Just because I had the same problem sometimes stucking and rebooting and sometimes after going in gallery. Even I can't use 4.3 and 4.4 roms. Anyone have to contact with room developer or someone who know about this problem.
Sent from my SGH-T989 using xda premium
You might want to find an Official T-Mobile or Telus 4.1.2 or 4.0.3/4.0.4 rom that is Odin flashable, not one that has been custom made/flashable from recovery - then just start over after getting back to true stock, change to TWRP or CWM recovery that is 4.3+ compatiable, root and then flash rom/gapps etc.