[Q] E4GT cannot write PPP, AAA, and HA passwords - Samsung Epic 4G Touch

I am flashing a sprint epic 4g touch to page plus. I got the voice and text part without any problem. However, after I used a donor phone to get PPP password and HA/AAA secrets. I could not write them in. Every time after wrote them using DFS trial version, reading will come back blank, no matter what I do. Anyone knows why and how to write them?
I could not write DMU 10.key using EFS explorer either. QPST EFS explorer could not even list the directory. After I created a DMU folder and dropped 10.key into the folder, the 10.key file would disappear every time after reboot. Any idea?
Any thoughts are much appreciated.

You can write to them I think, but you cannot read them, which is why they come up blank

random45 said:
You can write to them I think, but you cannot read them, which is why they come up blank
Click to expand...
Click to collapse
Thanks. Any idea about the DMU 10.key? The folder is there, but the file is definitely gone after reboot. I can drop another 10.key file into the folder, and change it to read only, still would be gone after reboot. Thanks.

Did you write the SLP and the samsung password before you tried to write things?
There is a lot of good info on this thread about porting the phone to other service.
It is very hard to read those keys, so if you are writing them you can use the DFS log to see if you are getting errors when you try to read them (if you are using dfs to write them...)

wizardknight said:
Did you write the SLP and the samsung password before you tried to write things?
There is a lot of good info on this thread about porting the phone to other service.
It is very hard to read those keys, so if you are writing them you can use the DFS log to see if you are getting errors when you try to read them (if you are using dfs to write them...)
Click to expand...
Click to collapse
Thanks. I'll read the posts in that link.

Related

meid locations for baseband 2.15.00.0808

I need the meid locations for basband 2.15.00.0808. I don't uderstand the winhex way how you have the offset and have to add this to that. Thanks
jcthelight said:
I need the meid locations for basband 2.15.00.0808. I don't uderstand the winhex way how you have the offset and have to add this to that. Thanks
Click to expand...
Click to collapse
I think you forgot your flamesuit
fenixjn said:
I think you forgot your flamesuit
Click to expand...
Click to collapse
What do you mean?
jcthelight said:
I need the meid locations for basband 2.15.00.0808. I don't uderstand the winhex way how you have the offset and have to add this to that. Thanks
Click to expand...
Click to collapse
Hey man I just woke up with a super hangover.. once I can stare at my laptop w/out the feeling of death coming over me ill be more then glad to help haha.. what stage are you at in meid retreival?.. (let's try and stay away from any meid mod talk.. retreival- cool, mod- no bueno)
Sent from my Random, old but still kickin, Epic 4g
j7jman said:
Hey man I just woke up with a super hangover.. once I can stare at my laptop w/out the feeling of death coming over me ill be more then glad to help haha.. what stage are you at in meid retreival?.. (let's try and stay away from any meid mod talk.. retreival- cool, mod- no bueno)
Sent from my Random, old but still kickin, Epic 4g
Click to expand...
Click to collapse
The esn is done. I just just need addresses for meid retreival. Would you rather pm? Thanks. I was at work when you responded.
How To Calculate your meid or esn addresses using Winhex
jcthelight said:
The esn is done. I just just need addresses for meid retreival. Would you rather pm? Thanks. I was at work when you responded.
Click to expand...
Click to collapse
its cool.. I dont know the addresses for your radio, but I can help you find them heres some steps you can take to help you calculate the address:
After you open your scan results with winhex
-do a search for your meid in reverse, with no spaces. Make sure you check the "list search hits" box. It should list the locations of the results at the top.
-there's gonna be an offset number to the left of it, you can click on it and it changes, click it so it shows the an offset number that contains letters.
-Open up the windows calculator and make sure it's in "HEX" mode.. it usually starts up in "DEC" mode.
- If you did a searched, lets say "00FA-0000" for example, in cdma ws, your gonna want to take your offset number and add it to your original search location.. for example 00FA0000 with no dash.
-You'll come up with a result like this-
*example- 00FA0000+4EDC2C= 148DC2C which would be 0x0148DC2C
-Just add 0x0 or 0x00 (depending on the length of your result number) in front of it.
-Do this for all the other locations & there you go, you have your addresses
I hope that helps
j7jman said:
its cool.. I dont know the addresses for your radio, but I can help you find them heres some steps you can take to help you calculate the address:
After you open your scan results with winhex
-do a search for your meid in reverse, with no spaces. Make sure you check the "list search hits" box. It should list the locations of the results at the top.
-there's gonna be an offset number to the left of it, you can click on it and it changes, click it so it shows the an offset number that contains letters.
-Open up the windows calculator and make sure it's in "HEX" mode.. it usually starts up in "DEC" mode.
- If you did a searched, lets say "00FA-0000" for example, in cdma ws, your gonna want to take your offset number and add it to your original search location.. for example 00FA0000 with no dash.
-You'll come up with a result like this-
*example- 00FA0000+4EDC2C= 148DC2C which would be 0x0148DC2C
-Just add 0x0 or 0x00 (depending on the length of your result number) in front of it.
-Do this for all the other locations & there you go, you have your addresses
I hope that helps
Click to expand...
Click to collapse
Says 0 found.
jcthelight said:
Says 0 found.
Click to expand...
Click to collapse
did you click the binoculars with "hex" below them.. because you have to click the ones w/out "hex" below them.. meaning your not supposed to search for specifically hex values
j7jman said:
did you click the binoculars with "hex" below them.. Because you have to click the ones w/out "hex" below them.. Meaning your not supposed to search for specifically hex values
Click to expand...
Click to collapse
so search for text it says search at the top then search for hex or text values. i tried both and got nothing.
00FB:55AC
00FD:6968
00FE:1524
015F:0F2C
015F:0F38
017C:AED0
018F:31AC
0190:3438
01D6:6D47
01D8:06C1
Baseband 2.15.00.0808
Software 4.53.651.1
I need one more. meid locations for baseband 2.15.00.0808
-----------------------------------------------------------------------------
meid
0x01D6D444
0x00FB55AC
0x00FD6968
0x00FE1524
0x015F0F2C (2X)
0x015F0F38
0x01903438
0x01D66D47
0x01D806C1
0X017CAED0
0X018F31AC
0X1903438
0x017CAE7C
esn
0x017A0FA4
0x01D5F0F0
0x01D5FC49
0x01D6A4C3
0x017CAA1C
0x017CAE7C (2X)
0x017D1338
0x0188E6BC
0x0127ECCC
0x0157ED2F
0x0157ED62
0x015FBD48
0X00FE681C
0x00FD3DC8
0x00FD3DC8
cheers
0x01d6b701
I dont understand what I must be missing. I have the ESN fixed and as well only missing the MEID. When I scan I only find three locations. I have found others with web searching but still missing some. What REALLY stumps me is from what I can tell I have the exact same set up as the original poster but have NONE of the same ESN or MEID locations. Someone PLEASE point me to what I am missing This is what I have posted below:
MEID:
0x00FD:6960
0x00FB:55AA
0x00FE:1524
0x00FE:1520
0x015F:0F2C
0x0190:3438
0X017C:AED0
0X018F:31AC
Phone Details:
OS - 2.3.3
SW Version - 4.53.651.1
Radio Version - 2.15.00.0808
PRL - 33789
PRI Version - 2.15_009
does anyone have anymore meid locations for 2.15.00.0808?
havieri23 said:
does anyone have anymore meid locations for 2.15.00.0808?
Click to expand...
Click to collapse
Just use the method for the EVO 3d it works great and in 5 mins.
Sent From My HTC EVO On Boostmobile
jcthelight said:
Just use the method for the EVO 3d it works great and in 5 mins.
Sent From My HTC EVO On Boostmobile
Click to expand...
Click to collapse
keep getting "error 222: invalid argument" when trying to copy file 0 and 1943 from nvm directory from phone to desktop
I have another EVO I put on boost no problem... But the usb port broke and screen got smashed... I got another one with the new 2.3.3 gb which I just flashed swag on on it. I have bandbase 2.15.00.0808 with the esn zeroed. But having problems with the meid... I tried to downgrade bandbase to 2.15.00.15.11 and 2.15.00.09.01 but still having problems zeroing and can't downgrade any further to do qmat. I have done a scan and search for meid location but when I enter the location the meid appears to the right of the screen but not where I can edit the hex. I am about strung on this for the last 3 days so any help or advice will be greatly appreciated. I don't have internet at home so if someone could talk me through this over the phone would be great. I have cws 2.7 qpst and qxdm. Or if someone could give the locations other than listed above. Thank you and I am willing to donate once my EVO is on boost.
Hardware 0004
Android bedding 2.3.3
Bandbase 2.15.00.0808
Software 4.54.651
havieri23 said:
keep getting "error 222: invalid argument" when trying to copy file 0 and 1943 from nvm directory from phone to desktop
Click to expand...
Click to collapse
Make sure the overwrite box is checked.
robskilz said:
I have another EVO I put on boost no problem... But the usb port broke and screen got smashed... I got another one with the new 2.3.3 gb which I just flashed swag on on it. I have bandbase 2.15.00.0808 with the esn zeroed. But having problems with the meid... I tried to downgrade bandbase to 2.15.00.15.11 and 2.15.00.09.01 but still having problems zeroing and can't downgrade any further to do qmat. I have done a scan and search for meid location but when I enter the location the meid appears to the right of the screen but not where I can edit the hex. I am about strung on this for the last 3 days so any help or advice will be greatly appreciated. I don't have internet at home so if someone could talk me through this over the phone would be great. I have cws 2.7 qpst and qxdm. Or if someone could give the locations other than listed above. Thank you and I am willing to donate once my EVO is on boost.
Hardware 0004
Android bedding 2.3.3
Bandbase 2.15.00.0808
Software 4.54.651
Click to expand...
Click to collapse
Use the EVO 3D method works great.
Unbelievable how easy that was.... Way easier then my last one.... Thanks a lot.... Now to call and get this error 16 taken care of
---------- Post added at 05:22 AM ---------- Previous post was at 05:16 AM ----------
havieri23 said:
keep getting "error 222: invalid argument" when trying to copy file 0 and 1943 from nvm directory from phone to desktop
Click to expand...
Click to collapse
I had the same problem when copying from the phone just grab the file and drop it on your desktop. But when you go to put the edited file back on the phone use the copy from pc option

[HOW-TO] [CDMA] Backup your HA and AAA keys

Sometimes when you flash a new radio, or you mess around in QPST you can break your data. Whats behind the breakage you may ask? Its your AAA and HA shared secrets.
A little background information:
The HA key is what gets you 1x data on your carrier. This is carrier specific, however is NOT phone specific. This could be google'd if you really required it.
The AAA key:
This IS device specific, you cant google it. Its connected to your account, and the way to get it is not what some consider easy. This is what gets you EVDO speeds, with out it you are stuck on 1x. If you call your carrier they will not give it to you either.
Continuing on to more information...
We will need a few tools to backup the keys, some free some not.
Team BlueRidge Sense 2.1 (it contains proper apps for using DM PORT)
QPST (free find it online)
CDMA Workshop (the demo should be fine, you could also borrow it)
HTC DIAG drivers (Just google it and find the installation guide)
Time
A hex editor
Now for the fun.... (If something seems too vague, google it)
First, we must get msl, use the app MSL Reader in the market.
Now, dial ##PORT# on the you will get a menu, hit enable, and then
go ahead and enter your MSL.
Now, lets open QPST, set up the phone, and go to EFS in the services tab of QPST
Now in EFS, make a folder called "open sesame door" without quotes all lower case in the root directory of the file system
reboot your phone
Now---- Open CDMA workshop and connect to the com port of your phone
Lets do memory read here, see where stuff is
Readable area from: 013D:0000
Unreadable area from: 01EA:0000
Readable area from: C000:0000
Process is stopped at: C0F1:0000
That says, we can read 013D:0000 and C000:0000 Ill save you time and tell you we need to dump 013D:0000 however (for all vm ive seen)
So now, lets go back to cdma workshop (should be there already) and choose to read Memory, make sure eeprom is not checked
Start address will be 013D:0000 (what i mentioned earlier)
size 99999999
This will scan the phone and dump everything into a .bin
Lets get a snack while this dumps... It will take a while
_________________________________________________
Okay, now the thing is dumped, lets call this scan1.bin
Open this in hex now, and hit ctrl+f
search for the word "secret" No quotes of course
now (for vm) you will see vmug33k that is your HA key, the first one showed under secret is ALWAYS HA key
look down one line, whalla, your aaa key is right below. (BACK THIS UP email it to yourself take a picture, ect, DONT LOOSE IT EVER, YOU WONT GET IT BACK)
so now you have your keys backed up, i cant tell you what you can or cannot do with them, it is up to you the end user, however i cannot endorse flashing phones or any illegal activity. In the mannor I am providing this, it is to ONLY save your aaa key incase of a bad radio flash, if you ever find a leaked radio.
You're right Simon, you will not get that AAA secret back, better hope you have warranty if you lose it (i know from experience). Thanks for this.
On another note, do you know if their is a way to increase max speaker volume through qpst on this phone?
Does it allow you to write also?
What do you mean write?
To another device
Sent from my HTC_A510c using Tapatalk
You can but I can not say how as it's illegal in some cases. If you, the end user choose to, it is up to you. I can not endorse it, however, I can say, qpst is your friend
Sent from my HTC_A510c using Tapatalk
You say line below but that's a bit vague seeing as you don't say what offset length your using. Are you using 8, 10, 16 offset or what?
How long is the AKEY?
I'm a bit confused. I had it with QXDM but it doesn't work under Vista so I can't look it up the easy way.
Any help would be appreciated.
QXDM runs on Win7, don't know why it wouldn't on Vista... [the key is one must run it in XP compatibility mode]. That being said, the above tutorial references a tool in QPST [which doesn't require compatibility mode] called EFS Explorer; then switches to CDMA ware. It works as prescribed; no QXDM needed [QXDM didn't work for me attempting the easy way; doesn't display second set of info].
On specific question, if you open the dumped file in a hex editor [like HxD], you can visually see your aaa key after searching, as the tutorial suggests you do. I didn't need to put any offsets in my hex editor. You will find the aaa key to be 10 characters I believe for our phones [or more [[double that]] in binary].
Hope that helps; thanks for the tut Simon.
Rob
Sent from my PC36100 using Tapatalk 2

QPST EFS Explorer doesn't show nvm directory

I am using QPST 2.7 Build 378, on both Windows XP and Win7. Yes, I have installed Galaxy s2 USB driver. Connected to my computer using COM3. Sent SPC correctly. EFS Explorer shows title: FFA6550-ZRF6500.
However, in the left column, there is only root directory shown, i.e. /, there are no sub directories. Thus I cannot find a directory named nvm. Right clicking on the root directory gives the menu: "New" & "Delete"..
Has anyone used QPST EFS Explorer on Epic 4G touch before? What trick is there for showing the internal memory directories?
Thanks in advance.
what are you trying to do???? to my knowledge you don't need the nvm directory for anything, if you are trying to repair meid/esn use QXDM if you don't no how send me a PM and will guide you.
ctzw said:
I am using QPST 2.7 Build 378, on both Windows XP and Win7. Yes, I have installed Galaxy s2 USB driver. Connected to my computer using COM3. Sent SPC correctly. EFS Explorer shows title: FFA6550-ZRF6500.
However, in the left column, there is only root directory shown, i.e. /, there are no sub directories. Thus I cannot find a directory named nvm. Right clicking on the root directory gives the menu: "New" & "Delete"..
Has anyone used QPST EFS Explorer on Epic 4G touch before? What trick is there for showing the internal memory directories?
Thanks in advance.
Click to expand...
Click to collapse
same issue
Hi, I have same issue going on.
can't read anything under EFS explorer except the symbol for root folder.
I'm trying to back up my NVM as when I try to make changes under
QPST 2.7 378build, Service Programming, when I try write anything, (even if I make no changes to anything), I get an error:
NV ITEM = NV_UE_IMEI_I , STATUS NV_READONLY_S. I got this recently probably after performing one of the following:
I think this started since I performed a factory reset, by ##RTN# or was it ##72786# not sure anymore sorry.
Or it might have been simply by running this program called "Samsung MEID Repair.exe" from the verizon galaxy s2 forum.
Can anyone help me out? thanks.
strange
In case anyone is following this.
The Epic Touch has a mind of it's own.
I haven't changed anything at all, but QPST Service Programming is still producing that error I mentioned earlier. But
my changes are in fact saved after the phone reboots. I'm really not sure if this was the case before, may have or may not have.
I do believe I tried writing something before, and it would not save. "Now I don't know what to believe."
Anyway EFS Explorer is now working, it's reading all the directories.
So I'm relieved.
thanks

[Q] Corrupted/Bad/Invalid IMEI -- looking for another option.

Thank you for the read-visit.
I recently bought a second hand Tmobile Samsung SGH-T889 Galaxy Note II. Unfortunately,
I inherited a host of issues. The IMEI is corrupted. In this thread, I'm hoping to figure
out why I can't successfully write to the device. I will list everything that I've tried so far,
and to be honest, I really don't know what I can try next. Share your input please!
SGH-T889
Build Version: M9615ACEHWMAZD17513035
Version Dir ;: ACEFWMAZ
Firmware: T889UVALK8:_(4.1.1) (12/19/12) [FACTORY IMAGE]
Preface:
I read in a few other threads where people were having issues with the 4.1.2 firmware, so
I elected to downgrade to the 4.1.1 using a factory image by flashing using Odin 3.0.7.
I then used "Galaxy Note2 Toolkit" to flash root of the device while also including clockworkmod
recovery and busybox.
First Method:
After downloading and installing the Android Terminal Emulator, I tried to enter
the following code to write to the device:
su
echo 'AT +EGMR=1,7,"IMEI_1"'> /dev/pttycmd1
The device accepted the commands, but the write never occurred.
On the web, this solution is everywhere; however, I think that the
solution is specifically for MTK phones. In fact, the output command
"pttycmd1" isn't in the /dev directory or anywhere within the root file structure.
Second Method:
Accessing the hidden menu on the phone by entering *#7284#, I modified
the Qualcomm USB settings to allow for a serial USB connection.
I then used the "Qualcomm NV Tools," included in the fourth tab of EFS Professional
development software, to restore the backup IMEI to the device at the memory block located
at decimal address 550. The device accepted the command and I received
no indication of error, but the device was again not overwritten.
Third Method:
I installed RootExplorer application and used this tool to access the root directory and made
a copy of the EFS folder where I assumed the IMEI is stored. I then deleted the folder allowing
the system to recreate the EFS Folder after a reboot and a factory reset. I repeated the
previous methods, but I wasn't able to make a difference. Consequently, I restored my EFS folder.
Fourth Method:
I tried messing around with permissions allowing for read/write for the "efs" and "factory" folders
within the root file structure. Notwithstanding, I also expanded my read/write changes to the /dev/block folder focusing in particular on /dev/block/mmcblk0p3. (I read in another thread that the IMEI was stored in this block
/dev/block/mmcblk0p3.) Changing ownership of the files "owner" and "group" to root, I then tried writing to the device again using the previous methods mentioned, as well as fiddling around with another software called
"NV-items reader_writer v1.0," but all these approaches failed too.
Just as an added comment, I think that file manager such as Root Explorer re-mounts a read only root file
structure as a floating read/write. Therefore, while I think that I'm making changes to permissions -- I am, because I can see the change occur -- this change is actually temporary until the device is rebooted.
General Comments:
I suspect the GSM US variant of the Galaxy Note II is different, because I can't explain
why the device will not update the IMEI even with superuser rights. Along the way, I tried to
do a factory reset as well, but remember this approach made little difference since the device
was near factory settings from the onset since I just downgraded to 4.1.1.
Questions
Am I missing another method? please point me in the correct direction -- I'm stumped.
I value and appreciate any input in advance that you could lend.
when you first bought the phone and put in your t-mobile S I M card in it..
what happened .
are you sure its not a blocked imei phone.
this seems to be going around...
are you trying to use it on t- mobile ..
please post the original issue not just want you done to try and fix it..
Thank you for the reply.
This problem stinks.
I don't have a tmobile sim card. The phone is for Tmobile and I hope to use the phone on T-mobile's MVNO (mobile network virtual operator) SimpleMobile, a carrier that piggybacks on the Tmobile carrier. I have Simplemobile SIM card, which the device does not recognize. The network in the "About Phone" in Settings is listed as Unknown. I think that the phone is locked, but I thought that this issue is exclusive of my present dilemma.
So, what is preventing me from writing an update to the device? There are a couple of good Qulalcomm
tools on the market like DFS CDMA ver. 4.7.0.2 and Qualcomm NV Tools, but both of which
fail to restore the IMEI. Is this a CDMA vs GSM tool interface issue?
Where is the IMEI stored on the device? My efs/imei folder only has one file: "mps_code.dat"
(I guess NV_DATA.BIN file is not present for LTE users.)
Thanks again, in any case.
If I were you, I'd try writing the T889 NV backup from the AWS mod thread with QPST or QXDM. Then finish off with the IMEI using EFS Professional.
As you've noticed, no NV_DATA.BIN for our devices. The /efs partition isn't enough of a backup to fix things.
Information applicable to the N7100 is going to be useless here since it has an Intel baseband, as opposed to the LTE variants which run on a Qualcomm chip.
Darkshado said:
If I were you, I'd try writing the T889 NV backup from the AWS mod thread with QPST or QXDM. Then finish off with the IMEI using EFS Professional.
As you've noticed, no NV_DATA.BIN for our devices. The /efs partition isn't enough of a backup to fix things.
Information applicable to the N7100 is going to be useless here since it has an Intel baseband, as opposed to the LTE variants which run on a Qualcomm chip.
Click to expand...
Click to collapse
Thank you Dark Shado[w].
Fifth Method:
I used QPST configuration to establish a serial connection. Using one of the software's client applications called
QPST Software Download, I made a backup of NV Memory Files and then used a hex editor
to locate the IMEI number (offset 00001700 --fyi) and made the repair. However, when I attempted to restore the
file using QPST Software Download, the software failed to update the device. Take note that the software indicated the memory restore worked. However, again, I'm not sure what is preventing me from writing to the device.
Every editor or tool that I have used to interface with the device successfully reads the device but does not write.
In the Qualcomm USB Settings, I have chosen either "RNDIS + DM + Modem" or "DM + MODEM + ADB" settings.
I also try to make sure that "USB Debugging" is checked in "Developer options" in Settings. (This
setting appears to toggle depending on which USB serial setting is chosen.)
I began messing around again with EFS Professional. The problem with this approach is that the backup file is stored in the form of an image file. Unfortunately, I can't edit the image to repair the IMEI with a hex editor.
Previously the backup file was in the form of a bin or text format making the process of editing easy.
I also confirmed indeed that the address location of the efs folder including the IMEI is recorded in /dev/block/mmcblk0p3 for Galaxy Note II LTE variants.
Any other ideas? Is there any other toolkits that might be easier to work with?
Hey since you already odin 4.1.1 go ahead and unlock your phone using the free unlock method. Than try using your simple mobile sim again.
G7Baker said:
Hey since you already odin 4.1.1 go ahead and unlock your phone using the free unlock method. Than try using your simple mobile sim again.
Click to expand...
Click to collapse
Hi G7Baker. Thank you for the reply.
I was not able to unlock the device using the *#197328640# approach.
The device is missing the "Press [4] NW LOCK NV DATA INITIALLIZ"
I read elsewhere that I needed to downgrade the device to 4.1.1 and this option
would reappear in the menu settings. Specifically, if I downgraded the modem from
4.1.2 to 4.1.1, this option would again appear. In my case, the option is still missing.
I figured that I would just focus on my corrupt IMEI before addressing the locking issue...but if you any ideas,
i am open.
I'll be blunt: you haven't listened to anything I've said.
Use the .qcn file from the AWS mod thread. Not yours hex-edited to contain your IMEI. You NV items are already messed up.
Toggling USB Debugging might undo the "RNDIS + DM + Modem" setting.
Use EFS Professional to type in (not copy-paste, it's a quirk in the UI) your IMEI, then write it. Make sure you've got the latest version, and that you're using the Qualcomm tools. Or hex-edit the file from the AWS mod thread since you're capable of doing so.
Ditch this "toolkit" mindset and get their actual components, latest versions, straight from the devs. You'll be able to check for issues in their respective threads as well.
Good luck,
Darkshado
Darkshado said:
I'll be blunt: you haven't listened to anything I've said.
Use the .qcn file from the AWS mod thread. Not yours hex-edited to contain your IMEI. You NV items are already messed up.
Toggling USB Debugging might undo the "RNDIS + DM + Modem" setting.
Use EFS Professional to type in (not copy-paste, it's a quirk in the UI) your IMEI, then write it. Make sure you've got the latest version, and that you're using the Qualcomm tools. Or hex-edit the file from the AWS mod thread since you're capable of doing so.
Ditch this "toolkit" mindset and get their actual components, latest versions, straight from the devs. You'll be able to check for issues in their respective threads as well.
Good luck,
Darkshado
Click to expand...
Click to collapse
Thank you Darkshado[w] for the advise.
Game plan
qcn generic file (binary format) --> modify imei in qcn generic file --> EFS Professional-Qualcomm (fourth tab) to apply Restore
Darkshado[w], I'm looking at the EFS Professional -- Qualcomm tab (fourth tab). Just to be clear, this tab has a
"Qualcomm NV Tools" button, to which I don't proceed. This tab has also a set of "NV Backup" and "NV Restore" functions. These functions are supported for US variants only. (The T-mobile T889 has a Qualcomm chipset Gobi MDM9215, making the device eligible, right? or I guess these tools are meant only for Sprint and Verizon variants only) These tools, I believe, are where you would like me to use to make my restoration possible.
Just to be clear, this Restore/Backup receives a binary file, opposed to "Qualcomm NV Tools" that receive a text file.
However, when I click on "NV Backup" or "NV Restore," the phone immediately reboots.
On the same page the following disclaimer is written "If these functions are not supported your phone will just reboot." My device rebooted and I can't use this approach for the moment.
---
I was searching the AWS thread to which you alluded.
On December 28, 2012, I saw that you posted a full NV backup, IMEI removed, at the following thread:
http://50.23.216.69/showthread.php?t=2068041&page=2
I downloaded your attachment and modified the TEXT file to include my repaired IMEI for the T889 and then used
EFS Profressional via "Qualcomm NV Tools" to restore to my device.
I made sure that the device was set for a USB serial connection,
since "Qualcomm NV Tools" would not make the SPC connection otherwise.
The restore procedure completed without any errors, but the device was not successfully written to...again.
---
I also downloaded the ATT_I317_AWSMOD_dumimei.qcn file from the thread. Using QPST via their client application "Software Download" I attempted to make the restoration.
I attempted the restoration twice using "RNDIS + DM + Modem" and "DM + Modem + ADB" settings. In the phone utility menu, UART was always set to "PDA" and USB was set to "PDA" as well. In both cases, the device was not written. The software indicated that the restoration was successful when in fact this case was untrue.
--
On the EFS Professional version2.0.062, I was able to generate backup files using the backup option located on the second tab.
For this backup option, I selected "International LTE Variants" for the "Device Filter." The software
generated one tar.gz file; however, when extracted, a efs.img file and four other bin files are revealed. Unfortunately, the image file of efs contains my corrupted IMEI, which I'm not sure how to edit. I tried to use Hex Workshop Hex Editor to edit the file but can't find the IMEI in this type of file. Alternatively,
is there a generic backup tar.gz of SGH-T889 that I can try to restore?
--
What are your thoughts? Please advise.
garbageslot said:
Hi G7Baker. Thank you for the reply.
I was not able to unlock the device using the #197328640# approach.
The device is missing the "Press [4] NW LOCK NV DATA INITIALLIZ"
I read elsewhere that I needed to downgrade the device to 4.1.1 and this option
would reappear in the menu settings. Specifically, if I downgraded the modem from
4.1.2 to 4.1.1, this option would again appear. In my case, the option is still missing.
I figured that I would just focus on my corrupt IMEI before addressing the locking issue...but if you any ideas,
i am open.
Click to expand...
Click to collapse
I later downgraded the firmware from T889UVALK8 to T889UVALJ1 of 4.1.1. The NW LOCK NV DATA INITIALLIZ
finally appeared and was able to unlock the device successfully. Awesome!
However, I'm still trying to figure why my NV Memory Block refuses to be written. Please share your input!
No solution ... yet.
I tried deleting the efs folder and then I went back through all the methods that I have discussed
really to determine if and when the device was being written. Trying to restore the efs folder from a backup
copy, my findings seem conclusive.
I found that the ONLY solution that replaced my efs folders was EFS Professional--Restore (third tab).
In my case, I'm just restoring my corrupt NV memory backup back onto the device, but this approach can
work for me. In all other methods that I employed, the device and software indicated that a successful update was
made but these cases are untrue; the device is not updated.
Where does this leave me? If I am going to flash my device using this restore feature of EFS Professional(third tab),
I need to flash a modified efs.img that is corrected for my corrupted imei.
Does anyone have a solution out there for the SGH-T889?
garbageslot said:
I later downgraded the firmware from T889UVALK8 to T889UVALJ1 of 4.1.1. The NW LOCK NV DATA INITIALLIZ
finally appeared and was able to unlock the device successfully. Awesome!
However, I'm still trying to figure why my NV Memory Block refuses to be written. Please share your input!
Click to expand...
Click to collapse
I learned today that someone claimed that this SGH-T889 device has a hardware security measure in place. The device has a chip that has the IMEI that is write/no-rewrite (eMMC?); therefore, successful service combines both a hardware and software approach. My "deep throat" operative also said that the IMEI for this particular device appears in five different places within the NV Memory block, making the repair not so trivial.
Can anyone confirm this statement? I can't find anywhere where this statement is validated.
I would have to call bulls..t on that, I lost my imei flashing a tmobile modem to get lte and was able to rewrite my imei and get it working. Took me 2 days and lots of messing around but finally worked.
http://forum.xda-developers.com/showthread.php?t=2068281
You can try this link has some valuable info and links.
rail205 said:
I would have to call bulls..t on that, I lost my imei flashing a tmobile modem to get lte and was able to rewrite my imei and get it working. Took me 2 days and lots of messing around but finally worked.
http://forum.xda-developers.com/showthread.php?t=2068281
You can try this link has some valuable info and links.
Click to expand...
Click to collapse
Thank you Rail205 for your reply. Reviewing the thread that you sent,
I'm still not sure how I should proceed.
I was comparing my device allocation using the df command on the android emulation terminal .
# df
My partition allocations are consistent with jravi and darkshado[w] on the first page of the thread,
so I'm wary if I flash with an updated PIT file that this approach will make a difference.
My device is reading the correct internal storage for example.
To reiterate, if the block allocations are the same, can I assume that using a new T889V pit file
on my device the T889 will make no difference?
Currently, my device is now unlocked, rooted with a 4.1.2 OS.
The device has radio service.
Unlike everyone else who has been successful e.g. Darkshado[w] who has successfully
written an editable hex file or text file (depending on the method employed), my
device remains unmodified when performing approaches of this kind.
The only method that appears to work for me is flashing an image file
using EFS Professional (third tab).
This dilemma is the chicken / egg conundrum, how do I flash the device with the corrected img file
when I don't have a copy of an img file with the corrected imei with which to flash? Otherwise, considering
a no-img file approach, I could try to make the partitions writable (fyi I have used Root Explorer already to modify
the permissions of /dev/block, /efs and /factory before attempting an update -- you guessed it, no luck.)
Anyone, any thoughts? Anyone?
Success!
Sixth Method
NOTE: Please also refer to "Six Method. Addendum" post #21 located later in this thread. Both posts are critical to understanding the complete solution.
Well, I decided to go to one of these guys who advertise on Craigslist to repair corrupt IMEI. He claimed that he was using one of these boxes that reads and writes without technically flashing the device.
I sat with him for a couple hours, and, in the end, he could not do it! My IMEI went from some corrupted output to reading simply "0/9." At that point, I had limited phone service and mobile data EDGE only. The device had trouble finding the DM mode as well. (He felt so bad that he couldn't take my money, but this moment was also a validation for me that my device had a very specific problem, not a trivial contest in the least, but an awesome validation that this last week's efforts were not in vain: If the 'expert' can't figure this out, then where would this leave me?)
An important note worth mentioning is that the Craigslist guy downgraded my android OS from 4.1.2 prior to making modifications. Unfortunately,
I did not note to which version and build he downgraded. (My guess: most likely a build variation of 4.1.1 OS)
Anyhow, so I returned home and decided to get to work and access the phone through the service mode with the intention of rebuilding the NV memory block.
*#197328640#
[1] UMTS
[6] Common
[6] NV REBUILD
[1] Load defaut NV
This approach changed my IMEI from "0/9" to "0/0." Now, when I tried connecting to the device, the software read the correct DM Mode. (Interestingly, I still received limited phone service.)
I used a program called "NV-items reader_writer v1.0." Of the many programs that I tried, this program is super simple since the software output is text based i.e. you don't need a hex editor. The download link is here.
http://modemfiles.blogspot.com/2013/09/download-free-nv-items-reader-writer.html
I extracted the memory block from decimal address 550 to 550 and modified the block to read my non-corrupted IMEI. (I didn't need
to change root permissions or anything complicated like that, steps I performed in some of my previous method-approaches.)
My device finally was written and read the correct IMEI!
Thank you to everyone who contributed. My success is your own!
UPDATE:
So, as I mentioned above that I was receiving EDGE only and the carrier service was spotty. In the end, I realized that my NV Build was corrupted, and since I was now able to write to the device, I corrected this problem by referencing Darkshado[w]'s post.
On December 28, 2012, I saw that he posted a full NV backup for the T889, IMEI removed, at the following thread:
http://50.23.216.69/showthread.php?t=2068041&page=2
UPDATE: XDA admins have invalided the hyperlink to Darkshado[w]'s original post. If you require the text file, private message me with your email
and I will send you the same template file that he had originally made available. (edited 7/18/2015)
Using "NV-items reader_writer v1.0," I wrote to my device using the file provided by Darkshado[w]. Again just to be clear, I restored the entire NV build and only changed the IMEI block, which is located at decimal address 550. Now, my device is finally getting reliable connectivity at 4G speeds (only 4G, opposed to LTE, since I'm using a MVNO instead of a direct Tmobile plan). Anyways awesome still!
I'm glad you fixed it man!..you went through Hell fixing your phone.
I ALWAYS read and follow these "bad IMEI" threads to learn something "just in case" and I must say that your case it's the most complex (for me anyways) I've ever read.
Cheers to you!
New link to file please
garbageslot said:
Success!
Sixth Method
Well, I decided to go to one of these guys who advertise on Craigslist to repair corrupt IMEI. He was using one of these boxes
that reads and writes without technically flashing the device.
I sat with him for a couple hours, and, in the end, he could not do it! My IMEI went from some corrupted output
to reading simply "0/9." I had limited phone service and mobile data EDGE only. The device had trouble finding the DM mode as well. (He felt so bad that he couldn't take my money, but this moment was also a validation for me that my device had a very specific problem, not a trivial contest in the least, but an awesome validation that this last week's efforts were not in vain: If the 'expert' can't figure this out, then where would this leave me?)
Anyhow, so I returned home and decided to get to work and put the phone into a service mode with the intention
of rebuilding the NV memory block.
*#197328640#
[1] UMTS
[6] Common
[6] NV REBUILD
[1] Load defaut NV
This approach changed my IMEI from 0/9 to 0/0. Now, when I tried connecting to the device,
the software read the correct DM Mode. (Interestingly, I still received limited phone service.)
I used a program called "NV-items reader_writer v1.0." Of the many programs that I tried, this program
is super simple since the software output is text based i.e. you don't need a hex editor. I extracted the memory block
from decimal address 550 to 550 and and modified the block to read my non-corrupted IMEI. (I didn't need
to change root permissions or anything complicated like that, steps I performed in some of my previous
method-approaches.)
My device finally was written and reads the correct IMEI!
The guy from Craigslist suspects -- mind you, he wasn't gregarious in the least-- he hinted that "the box"
was needed to break some kind of internal logical state between the device's IMEI and
T-mobile's network protocols. Once this state was broken, the device was receptive to being written.
Thank you to everyone who contributed. My success is your own!
UPDATE:
So, as I mentioned above that I was receiving EDGE only and the carrier service was spotty. In the end, I realized that my NV Build was corrupted, but since I was now able to write to the device, I corrected this problem by referencing Darkshado[w]'s post.
On December 28, 2012, I saw that he posted a full NV backup for the T889, IMEI removed, at the following thread:
Using "NV-items reader_writer v1.0," I wrote to my device with the corrected IMEI using the file from Darkshado[w] as a template (replacing decimal address 550). Now, my device is finally getting reliable connectivity and 4G speeds (only 4G, opposed to LTE, since I'm using a MVNO instead of a direct Tmobile plan). Anyways awesome still!
Click to expand...
Click to collapse
Hello! I'm facing the same issue with my T889, could you please re-post the file from darkshadow's post?
Thank you!
NV Backup Blank-IMEI Template File
walydiesel said:
Hello! I'm facing the same issue with my T889, could you please re-post the file from darkshadow's post?
Thank you!
Click to expand...
Click to collapse
Thank you WalyDiesel for the follow up.
The administrators of this site appear to have made the original link outdated since I started this thread..
Please internally message me your email and I will send you the NV Backup Blank-IMEI template file.
(The file exceeded the attachment limits for this thread.)
You still need to edit decimal address 00550
to your specific IMEI number. Upon doing so,
write the entire file to your T889 device.
Good luck! -- You are in the home stretch.
garbageslot said:
Thank you WalyDiesel for the follow up.
The administrators of this site appear to have made the original link outdated since I started this thread..
Please internally message me your email and I will send you the NV Backup Blank-IMEI template file.
(The file exceeded the attachment limits for this thread.)
You still need to edit decimal address 00550
to your specific IMEI number. Upon doing so,
write the entire file to your T889 device.
Good luck! -- You are in the home stretch.
Click to expand...
Click to collapse
Ok! I sent you my email inbox.
Thank you!
walydiesel said:
Ok! I sent you my email inbox.
Thank you!
Click to expand...
Click to collapse
I'm back!
Unfortunately, the past two days I tried, But I can't write back the file to phone using nv_reader_writer tool. I can't even read from phone. It keeps saying "Failed, phone does not answer".
I read on a thread that it could be because my chip is not Qualcomm. In fact my chip is Exynos. Is it the problem? Is there another tool that I could use? Thank you.
P.S: I'm running stock android 4.3. I also tried stock 4.1.2. Same result and Service mode just leads me to a black screen with Serviceode written on top.

[GUIDE] Restoring IMEI and EFS after erasing or corrupting (No backup needed)

OOPS!
You were following guides on XDA, and throwing random commands in ADB from the posts under the guides (DON'T DO THIS!) and now your slick new ROG phone 2 doesn't have mobile data, calls, wifi, or bluetooth. You quickly find out that flashing the phone with any firmware old or new, doesn't help you, as this issue is directly linked to your chip in your phone.
I quickly found that I needed a QCN file from someone with a rog 2 phone, however I could not get any help here on XDA except from the user Greatuser123, who did not want to give out his QCN file (understandably), but did send me some notes to try and help with other tools.
With nothing working, and no QCN file, I ordered another ROG 2 and waited for it in the mail. After it got here, I quickly extracted the QCN file, replaced the IMEI's in it, and used QPST to restore my phone.
I am simply writing this guide with the generic QCN file with my info masked out of it, so no one has to go through what I went through.
Common issue
This most commonly happens with ROG 2 Phones from the commands:
DO NOT RUN THESE COMMANDS UNLESS YOU KNOW WHAT YOU ARE DOING!
(spaced command to ensure no one runs this!)
fastboot erase modem st 1
fastboot erase modem st 2
Click to expand...
Click to collapse
On most phones, on a reboot, these partitions would be restored on reboot, but not on most ROG's.
Prerequisites
Rooted Phone
QPST
Qualcomm USB drivers
IMEI Converter
Platform Tools
The Fix
Follow the above root linked video, or find the root thread for your phone here on XDA, and root your phone. This will not work unless you are rooted, although I do not know how you would get into this mess without having your phone rooted already.
Install QPST tools
Install Qualcomm USB drivers
Download the attached zip "good_qcn.zip" and extract the .QCN file anywhere on your machine
Open the .QCN file with any Hex Editor (I used HxD) and search for the Hex-Values: 08 3A 85 99 99 99 99 99 99
NOTE: There will be TWO locations with this value. This is where your IMEI_1 and IMEI_2 will go. Your IMEI_2 goes into the FIRST occurrence, while your IMEI_1 goes in the second.
Download the IMEI Converter app and type in your IMEI_1 and click "Convert", place the converted hex output into a notepad or similar
Do the same for your IMEI_2 and place it in the same location
Now that you have the HEX version of both your IMEI's, paste your IMEI_2 in the FIRST occurrence of the fake IMEI in the QCN file
Paste your IMEI_1 in the last occurrence of the fake IMEI and now save your new .QCN file.
Ensure your device is in USB Debugging Mode.
Download and extract the Platform Tools if you do not have them already.
Plug your phone into your computer using either port
Navigate to your extracted Platform Tools and in a Command Line type "adb devices" to ensure your device is visible.
Run a shell with "adb shell" and elevate your permission with "su"
Now it is time to enable Diag mode by running "setprop sys.usb.config rndis,diag,adb"
At this time, if you installed the Qualcomm Drivers, your device manager should have a port similar to "Qualcomm HS-USB Diag". If not keeping trying to re-enter diag mode and ensure the drivers are correct.
Open up "QPST Configuration" which was installed earlier. You should see your phone listed under "Active Phones". Click "Start Clients" -> "Software Download"
The Port field of the QPST Software Download should list your phone, if not something is wrong.
Click "Restore", and in the xQCN field, click "Browse", change the file type from XQCN to QCN, and select your newly made QCN file
Click "Start", and once the process is done, restart your phone
Conclusion
If all went well, your phone should now have all its bells and whistles again. Sometimes it may require a Factory Reset, and this should always be the practice anyways. If you have mobile data, but only H+ or EDGE, dial *#*#4636#*#* on your phone and ensure LTE is provisioned.
Good luck guys!
Special thanks to: Greatuser123 for helping when no one else would, and HomerSp for his many useful guides that some tools and knowledge was borrowed from.
Hi bro, Nice to meet you and I did my best to help you out, as I spent some stress on this when I was one of the first people that suffered with this issue. And gladly you solved it, bro you misunderstood badly about I did not want to give you the qcn, I was going to give you my qcn file but first I was asking to you for some proof , photo of same phone as me and the package to know that you are not going to change or edit badly ( doing mischievousness) as you never sent the proof I did not send the qcn file.. you can re check again your messages. Bro
Thank you very much for this, life saver.
My wifi and bluetooth works fine but I cannot get my mobile to power back on. When I go into the menu mobile power is just not there :/
Do you have the global or the cn version?
BlazingBullets said:
Thank you very much for this, life saver.
My wifi and bluetooth works fine but I cannot get my mobile to power back on. When I go into the menu mobile power is just not there :/
Do you have the global or the cn version?
Click to expand...
Click to collapse
This QCN came from a global device, but I imagine this could be used to recover the mobile at least temporary to fully fix the device, no matter the origins.
Sorry for the delay.
Greatuser123 said:
Hi bro, Nice to meet you and I did my best to help you out, as I spent some stress on this when I was one of the first people that suffered with this issue. And gladly you solved it, bro you misunderstood badly about I did not want to give you the qcn, I was going to give you my qcn file but first I was asking to you for some proof , photo of same phone as me and the package to know that you are not going to change or edit badly ( doing mischievousness) as you never sent the proof I did not send the qcn file.. you can re check again your messages. Bro
Click to expand...
Click to collapse
No no, please do not think I meant you by that. It was other users (understandably) that questioned my motives before you. I absolutely would have taken you up on your offer if I did not already have the phone on the way Either way, I really appreciate your help during this, and I hope you continue to help other users the same way you did for me.
decrypterfixer said:
This QCN came from a global device, but I imagine this could be used to recover the mobile at least temporary to fully fix the device, no matter the origins.
Sorry for the delay.
Click to expand...
Click to collapse
After a lot of heart ache and even making an EDL cable I could not get cell network back. I"ve sent it into ASUS to get fixed. I have made a few backups and will diff them when I get my device back so hopefully I can see what they have fixed so others don't have to experience this.
BlazingBullets said:
After a lot of heart ache and even making an EDL cable I could not get cell network back. I"ve sent it into ASUS to get fixed. I have made a few backups and will diff them when I get my device back so hopefully I can see what they have fixed so others don't have to experience this.
Click to expand...
Click to collapse
I can help u
Well done mate you will be a hero someday haha good job ?
Leevii2208 said:
I can help u
Click to expand...
Click to collapse
Please provide your support ouvertly here and not via social media!
I've edited your post; please refer to https://forum.xda-developers.com/oneplus-5t/how-to/telegram-chat-channels-forward-t3765018
not work
ty but not working or i did wrong. i wrote (change my imei, two way u and other program) and post new "good.qcn" (i see finished in QPST Software). i restart phone but nothing change. i think phone in document just "read-only".
I want redmagic 3 qcn file
good job bro
Is it works for rog phone 3?
I can't find that hex
hello friends 08 3A 85 99 99 99 99 99 99 no found please help me
Hi, perfect post friend. Im try backup qcn to my Rog Phone 3, but when try said Satuts: Memory Backup Failer and Errors: Disr Error while write to file, any solution to this? I appreciate your help.
decrypterfixer said:
OOPS!
You were following guides on XDA, and throwing random commands in ADB from the posts under the guides (DON'T DO THIS!) and now your slick new ROG phone 2 doesn't have mobile data, calls, wifi, or bluetooth. You quickly find out that flashing the phone with any firmware old or new, doesn't help you, as this issue is directly linked to your chip in your phone.
I quickly found that I needed a QCN file from someone with a rog 2 phone, however I could not get any help here on XDA except from the user Greatuser123, who did not want to give out his QCN file (understandably), but did send me some notes to try and help with other tools.
With nothing working, and no QCN file, I ordered another ROG 2 and waited for it in the mail. After it got here, I quickly extracted the QCN file, replaced the IMEI's in it, and used QPST to restore my phone.
I am simply writing this guide with the generic QCN file with my info masked out of it, so no one has to go through what I went through.
Common issue
This most commonly happens with ROG 2 Phones from the commands:
DO NOT RUN THESE COMMANDS UNLESS YOU KNOW WHAT YOU ARE DOING!
(spaced command to ensure no one runs this!)
On most phones, on a reboot, these partitions would be restored on reboot, but not on most ROG's.
Prerequisites
Rooted Phone
QPST
Qualcomm USB drivers
IMEI Converter
Platform Tools
The Fix
Follow the above root linked video, or find the root thread for your phone here on XDA, and root your phone. This will not work unless you are rooted, although I do not know how you would get into this mess without having your phone rooted already.
Install QPST tools
Install Qualcomm USB drivers
Download the attached zip "good_qcn.zip" and extract the .QCN file anywhere on your machine
Open the .QCN file with any Hex Editor (I used HxD) and search for the Hex-Values: 08 3A 85 99 99 99 99 99 99
NOTE: There will be TWO locations with this value. This is where your IMEI_1 and IMEI_2 will go. Your IMEI_2 goes into the FIRST occurrence, while your IMEI_1 goes in the second.
Download the IMEI Converter app and type in your IMEI_1 and click "Convert", place the converted hex output into a notepad or similar
Do the same for your IMEI_2 and place it in the same location
Now that you have the HEX version of both your IMEI's, paste your IMEI_2 in the FIRST occurrence of the fake IMEI in the QCN file
Paste your IMEI_1 in the last occurrence of the fake IMEI and now save your new .QCN file.
Ensure your device is in USB Debugging Mode.
Download and extract the Platform Tools if you do not have them already.
Plug your phone into your computer using either port
Navigate to your extracted Platform Tools and in a Command Line type "adb devices" to ensure your device is visible.
Run a shell with "adb shell" and elevate your permission with "su"
Now it is time to enable Diag mode by running "setprop sys.usb.config rndis,diag,adb"
At this time, if you installed the Qualcomm Drivers, your device manager should have a port similar to "Qualcomm HS-USB Diag". If not keeping trying to re-enter diag mode and ensure the drivers are correct.
Open up "QPST Configuration" which was installed earlier. You should see your phone listed under "Active Phones". Click "Start Clients" -> "Software Download"
The Port field of the QPST Software Download should list your phone, if not something is wrong.
Click "Restore", and in the xQCN field, click "Browse", change the file type from XQCN to QCN, and select your newly made QCN file
Click "Start", and once the process is done, restart your phone
Conclusion
If all went well, your phone should now have all its bells and whistles again. Sometimes it may require a Factory Reset, and this should always be the practice anyways. If you have mobile data, but only H+ or EDGE, dial *#*#4636#*#* on your phone and ensure LTE is provisioned.
Good luck guys!
Special thanks to: Greatuser123 for helping when no one else would, and HomerSp for his many useful guides that some tools and knowledge was borrowed from.
Click to expand...
Click to collapse
I tried it till finish, but when I check, I lost my wifi mac address (status unavailable) and my imei still unknown. And now I wanna retry, I stuck at QPST Configuration application at step 17, it sometimes detected the phone, sometimes don't, it make me can't continue to click "star clients", (check in device manager, nothing wrong). can you help me?
sure which device rog 2 or 3?
gjkhan said:
sure which device rog 2 or 3?
Click to expand...
Click to collapse
uhhg that's a issue just download visual c++ redistributable 2010 sp1 x86 and it should be fine
gjkhan said:
sure which device rog 2 or 3?
Click to expand...
Click to collapse
Rog2. The port keep blinking when in QPST Tools, sometimes it detected, sometimes don't, so I can't copy the qcn to the phone. And also I don't know what's wrong with the qcn, I had follow the instruction, but it not works
hmmm use another pc or cable.
gjkhan said:
hmmm use another pc or cable.
Click to expand...
Click to collapse
Try itt but problem still persist

Categories

Resources