Related
How to install clockworkmod recovery:
Edit: Fixed install zip from sdcard bug
Method 1: Needs root
The first method is preferable for those who have root access on their Micromax A90. Those who do not have a rooted device should follow Method 2 instead.
1. Download cwmr_v5.5.0.4 (fixed).zip and unzip/extract it. After extracting move both the files to the root directory of your SD card.
2. Install mu7577.apk and run it. After that give the program root permissions if asked and tap Recovery Update.
3. Select recovery.img from SD card then tap the ok button.
4. Now you can reboot to recovery.
Congrats!
Method 2: SP Flash Tool method, root not required
1. Download MTK6575 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download cwmr_v5.5.0.4 (fixed) + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted cwmr_v5.5.0.4 (fixed) + scatter folder and select MT6575_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (without battery inserted) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR!
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.
dear brother are you tested it ! please post some screenshot here with A90.
BHARDIK said:
dear brother are you tested it ! please post some screenshot here with A90.
Click to expand...
Click to collapse
Yes bro I have tested it!
I will post the screenshots soon
please also post here STOCK ROM full firmware , because if we failed then we need to restore i try custom recovery maybe 10 times always failed then need to go service center for restore. if you add stock firmware then we no need to worry about any experiment.
Presently I also don't have the stock rom or stock dump of micromax a90, I am currently running a self modded rom.
Follow this guide http://forum.xda-developers.com/showthread.php?t=1981107 to make a dump/backup of rom
Sent from my A90 using xda app-developers app
i have ROMDUMP back up , take backup using terminal emulator type onandroid and he done , but no boot and recovery image on this back up.
but i dont know how to restore it using sp flash tool ?
BHARDIK said:
i have ROMDUMP back up , take backup using terminal emulator type onandroid and he done , but no boot and recovery image on this back up.
but i dont know how to restore it using sp flash tool ?
Click to expand...
Click to collapse
bro follow my guide to dump the rom, by that guide you will get the complete dump i.e all flash files such as boot.img, recovery.img, system.img, mbr.img, logo.img, etc and there i have also written the complete procedure to restore the dump using sp flash tool
Sent from my A90 using xda app-developers app
THANX
The guide is great....CMW installed in minutes...thanx a lot...waiting for custom rom
airjordanthehacker said:
bro follow my guide to dump the rom, by that guide you will get the complete dump i.e all flash files such as boot.img, recovery.img, system.img, mbr.img, logo.img, etc and there i have also written the complete procedure to restore the dump using sp flash tool
Sent from my A90 using xda app-developers app
Click to expand...
Click to collapse
in your method when i try to add script in GS_Script.apk select file but no any file saw there
and second question is this method is working for Micromax A90s MTK6577 devices also ?
BHARDIK said:
in your method when i try to add script in GS_Script.apk select file but no any file saw there
and second question is this method is working for Micromax A90s MTK6577 devices also ?
Click to expand...
Click to collapse
extract BackupTool_*.zip to the root of your sd card after that only you will be able to see the script in load script option.
and i have not tested this script on mtk6577 but it should work for it.
Sent from my A90 using xda app-developers app
hey guys here is micromax FTP server site here u find all micromax android mobile stock ROM all the version of realesed + original flasher and imei writing tolls for MTK 65166 TO MTK6577 ! is it good for you guys ?
***
user id = mxlive [ in small latter ]
password = [email protected] [ M capital its not (O) its (0) zero ]
best way to use this !
you need Firefox browser for this, in Google chrome its not working !
just copy past this given id and password if you not understand !
and then use Internet Download Manager for downloading anything ! for better downloading speed !
Is there any Jellybean custom ROM for the A90?
No Abhi Still no sign of any ! Custom ROM ! for A90 and A90s both just have CWM !!!!
BHARDIK said:
hey guys here is micromax FTP server site here u find all micromax android mobile stock ROM all the version of realesed + original flasher and imei writing tolls for MTK 65166 TO MTK6577 ! is it good for you guys ?
***
user id = mxlive [ in small latter ]
password = [email protected] [ M capital its not (O) its (0) zero ]
best way to use this !
you need Firefox browser for this, in Google chrome its not working !
just copy past this given id and password if you not understand !
and then use Internet Download Manager for downloading anything ! for better downloading speed !
Click to expand...
Click to collapse
thanks!
BHARDIK said:
No Abhi Still no sign of any ! Custom ROM ! for A90 and A90s both just have CWM !!!!
Click to expand...
Click to collapse
Has anyone tried flashing ROMs of similar devices like Karbonn A18?
Sent from my Galaxy Nexus using Tapatalk 2
provide URL please
Please provide URL Please?
Micromax Stock Rom & Flasher site FTP or otherwise please!
Can anyone post or tell me where I can get Micromax Stock Rom & Flasher from their site or otherwise please? I'd like to reflash to stock state instead of just removing CWM.
airjordanthehacker said:
extract BackupTool_*.zip to the root of your sd card after that only you will be able to see the script in load script option.
and i have not tested this script on mtk6577 but it should work for it.
Sent from my A90 using xda app-developers app
Click to expand...
Click to collapse
Hi, it woks with NGM Legend ? (mtk 6575 phone)
Still no sign of any custom ROM?
Anyway, which device has a similar config as the A90. I'll try flashing it's custom ROM.
Custom Rom ICS 4.0.6
Dear All,
See my thread here for Custom Rom
My mobile is - NXG Phablet.
Its specifications match to A90.
Check - ics 4.0.6 custom rom in my thread and download.
but use your A90 ics 'boot.img'.. means, replace your 'boot.img' in the downloaded file and rezip and flash through CWM recovery.
after boot it will come in Russian language. (because it is for Star N8000 - russian forum). so change language to english in settings. also , default launcher is SPB shell - Russian version. so install another launcher and use.
Rom is very good.
check here in CUSTOM ICS area.
http://forum.xda-developers.com/showthread.php?p=32932373
Happy Testing.
Phone Specs:
Hardware : MT6575
Model : O+_8.7_Android
Build number : Oplus_A100ALPS.GB2.MP.V2
Build date UTC : 20120706-085741
Android v : 2.3.6
Baseband v: MAUI.11AMD.W11.50.SP.V13.P1, 2012/04/27 18:49
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Fri Jul 6 16:56:36 CST 2012
Rooted via unsecured boot.img
and successfully flashed ClockWorkMod Recovery.
We need to modify the stock boot.img of the phone because it is "impossible" to root the device that has "ro.secure=1" setting in the boot.img , that is the reason why we need to modify the stock boot.img to have an "ro.secure=0"
If you are able to flash the modified boot.img to the phone.
ANY ROOTING METHOD will do, like
superoneclick, unlock me, or any exploit that uses ZergRush
take note that O+8.7 is MT6575
just follow instructions here if you want how to modify your own stock boot.img
http://www.mediafire.com/view/?n3m5ei65dn2qckx
Im not responsible for any damage that may be incured. im just sharing. I hope you understand.
The Easy Way:
If you want to use my modified boot.img. follow the succeeding instructions.
...
If you already have other versions of the softwares that are provided. Please Do not use them.
Use only provided software versions given to avoid conflict.
...
1) Download MTKXX_preloader_driver from attachment and install.[IMPORTANT]
2) Download boot.rar extract it and make sure you have boot.img file
3) Download MT6573_Android_scatter.txt
*As you can see, the scatter file is for MT6573, just ignore this, the important thing is the contents inside the file.
4) Using SP_Flash_Tool_v2.1134.00 load first the scatter file provided.
5) From the checkbox below, choose boot and browse for the boot.img provided.
*Make sure you selected the boot.img that is provided or else your phone might end up in a boot loop.
6) make sure to enable debugging mode in your mobile then turn it OFF.
7) Click download and plug in your O+ 8.7 to PC.
8) Then wait for download until you see the green circle.
9) Reboot phone
10) try SuperOneClick v2.3.3 ShortFuse.zip, or any rooting tool you are comfortable with.
CREDIT GOES TO SYMBIANIZER (ARIELANNE)
IF I HELP YOU WITH THIS... JUST A SIMPLE CLICK ON THANKS BUTTON... WILL GLADLY APPRECIATED!
Additional Information
If you have troubled with the USB driver for your device download this and extract it. Put in the place where you can easily find it.
On your computer go to device manager and look for the USB device that have yellow exclamation point.
Right click it and update, choose browse and look for your previously downloaded USB driver and install it.
Link http://www.4shared.com/rar/0MvyztbR/usb_driver_MT65xx_Android_ZTE_.html
Credits of this to numer and symbianizers.
WORKING
TOTALLY WORKS.. took out that preinstalled angry bird and fruit ninja game
OPLUS 7.1 Tab
Has anyone tried rooting their OPlus Tab 7.1? Mine's new so I'm still reluctant to do it. Will definitely ruin the warranty.
Just need to know if someone has successfully done that so I can root mine once the warranty is expired.
Is there a custom rom for this smartphone? If there is,please send me a message.
WORKING
Just rooted my phone yesterday...
What I did is that I just follow those given steps stated above but you really have to be careful because it might not work properly..
it is said in the step #6 that you must enable usb debugging to do this you have to go to:
SETTINGS >> APPLICATION >> DEVELOPMENT >> USB DEBUGGING (enable) and TURN OFF YOUR MOBILE PHONE.
step #7 Click DOWNLOAD FIRST and wait for the message in the bottom right said: PLEASE INSERT USB CABLE you will be given a 14sec time so you really have to insert the cable fast. After this step you will see the yellow bar to download and after that you will see the green box for successful confirmation.
try to reboot your phone and turn it on.
after this you can now root your phone but I suggest you use the SuperOneClick v2.3.3 ShortFuse.zip.
(z4root and universal androot is not applicable. I tried this 2 kind of root apps already.)
Just ENABLE USB DEBUGGING, insert your USB CABLE to the computer.
Download superoneclick from any site make sure to extract the files open it and you will see an ANDROID ICON with superoneclick.exe run the application then a box will appear.
Go to ADVANCE and click SEARCH DRIVERS then the USB DRIVER for O+ 8.7 will automatically download.
After that go to basic then click ROOT SHELL or SHELL ROOT. Then, click the ROOT. Systems from your mobile device will be seen. Wait for the box to be shown saying that your phone is successfully rooted. If you are in doubt you can do it again, repeating the same steps but don't repeat for the usb driver to download.
Reboot your phone. Turn it on and you will see superuser downloaded to your system application. If your still in doubt if your phone is rooted or not download ROOT CHECKER in your phone. Install the apps, run it and click the CHECK NOW. ROOTED will be shown in the status section.
Congratulations! Your phone is rooted!
If your not 100% sure of rooting your phone try to keep this for future use after the warranty of your phone expires.
AGREED
juicyka said:
just rooted my phone yesterday...
what i did is that i just follow those given steps stated above but you really have to be careful because it might not work properly..
It is said in the step #6 that you must enable usb debugging to do this you have to go to:
Settings >> application >> development >> usb debugging (enable) and turn off your mobile phone.
Step #7 click download first and wait for the message in the bottom right said: Please insert usb cable you will be given a 14sec time so you really have to insert the cable fast. After this step you will see the yellow bar to download and after that you will see the green box for successful confirmation.
Try to reboot your phone and turn it on.
After this you can now root your phone but i suggest you use the superoneclick v2.3.3 shortfuse.zip.
(z4root and universal androot is not applicable. I tried this 2 kind of root apps already.)
just enable usb debugging, insert your usb cable to the computer.
Download superoneclick from any site make sure to extract the files open it and you will see an android icon with superoneclick.exe run the application then a box will appear.
Go to advance and click search drivers then the usb driver for o+ 8.7 will automatically download.
After that go to basic then click root shell or shell root. Then, click the root. Systems from your mobile device will be seen. Wait for the box to be shown saying that your phone is successfully rooted. If you are in doubt you can do it again, repeating the same steps but don't repeat for the usb driver to download.
Reboot your phone. Turn it on and you will see superuser downloaded to your system application. If your still in doubt if your phone is rooted or not download root checker in your phone. Install the apps, run it and click the check now. Rooted will be shown in the status section.
Congratulations! Your phone is rooted!
If your not 100% sure of rooting your phone try to keep this for future use after the warranty of your phone expires.
Click to expand...
Click to collapse
very well said.....
QYOBZ said:
very well said.....
Click to expand...
Click to collapse
mga sir any other way or easiest way to root this fone
no signature was present in the subject
JuicyKa said:
Just rooted my phone yesterday...
What I did is that I just follow those given steps stated above but you really have to be careful because it might not work properly..
it is said in the step #6 that you must enable usb debugging to do this you have to go to:
SETTINGS >> APPLICATION >> DEVELOPMENT >> USB DEBUGGING (enable) and TURN OFF YOUR MOBILE PHONE.
step #7 Click DOWNLOAD FIRST and wait for the message in the bottom right said: PLEASE INSERT USB CABLE you will be given a 14sec time so you really have to insert the cable fast. After this step you will see the yellow bar to download and after that you will see the green box for successful confirmation.
try to reboot your phone and turn it on.
after this you can now root your phone but I suggest you use the SuperOneClick v2.3.3 ShortFuse.zip.
(z4root and universal androot is not applicable. I tried this 2 kind of root apps already.)
Just ENABLE USB DEBUGGING, insert your USB CABLE to the computer.
Download superoneclick from any site make sure to extract the files open it and you will see an ANDROID ICON with superoneclick.exe run the application then a box will appear.
Go to ADVANCE and click SEARCH DRIVERS then the USB DRIVER for O+ 8.7 will automatically download.
After that go to basic then click ROOT SHELL or SHELL ROOT. Then, click the ROOT. Systems from your mobile device will be seen. Wait for the box to be shown saying that your phone is successfully rooted. If you are in doubt you can do it again, repeating the same steps but don't repeat for the usb driver to download.
Reboot your phone. Turn it on and you will see superuser downloaded to your system application. If your still in doubt if your phone is rooted or not download ROOT CHECKER in your phone. Install the apps, run it and click the CHECK NOW. ROOTED will be shown in the status section.
Congratulations! Your phone is rooted!
If your not 100% sure of rooting your phone try to keep this for future use after the warranty of your phone expires.
Click to expand...
Click to collapse
Sir, it says that "No signature was present in the subject" what does it mean? please help me im on the verge of rooting my O+ 8.7 Thanks!
Sorry for the late reply
ericordas said:
Sir, it says that "No signature was present in the subject" what does it mean? please help me im on the verge of rooting my O+ 8.7 Thanks!
Click to expand...
Click to collapse
is the unlooking of your phone have been successful? if yes go to ADVANCE then click the search for USB DRIVERS. If you are done with this go to GENERAL and click the ROOT SHELL first then the ROOT.
JuicyKa said:
is the unlooking of your phone have been successful? if yes go to ADVANCE then click the search for USB DRIVERS. If you are done with this go to GENERAL and click the ROOT SHELL first then the ROOT.
Click to expand...
Click to collapse
yes sir i already tried that one kaso nalabas padin ung msg na "no signature was blah blah blah" tapos i try to ignore that para ma continue ung rooting, suddenly mag hang na sya tapos un na...
---------- Post added at 06:34 AM ---------- Previous post was at 06:18 AM ----------
ericordas said:
yes sir i already tried that one kaso nalabas padin ung msg na "no signature was blah blah blah" tapos i try to ignore that para ma continue ung rooting, suddenly mag hang na sya tapos un na...
Click to expand...
Click to collapse
sir the same pa din sya no signature was present in the subject :crying:
Woooo finally!
Finally I was able to root my O+ 8.7 if someone has the same problems as mine, try to download moborobo, thanks for the ones who helped and replied to my post! :victory::victory::victory::highfive::highfive::highfive::victory::victory::victory:
Stock with rooting o plus 8.7
alright.. i tried rooting my phone.. but i got stock here.. please see attach file.. please help.
Stock with rooting o plus 8.7
Alright.. i tried rooting o plus 8.7.. this is whre i got stock.. please help..
JuicyKa said:
is the unlooking of your phone have been successful? if yes go to ADVANCE then click the search for USB DRIVERS. If you are done with this go to GENERAL and click the ROOT SHELL first then the ROOT.
Click to expand...
Click to collapse
it works:laugh:
Steps i did in rooting o plus 8.7
I followed the steps which includes downloading the boot.img. Turning phone off and pressing volume up.. it started uploading but it didn't download.. i didn't see the green box.. instead a window that says an error.. (please see attached file)..
did you follow the instruction carefully
kirakuro2 said:
Alright.. i tried rooting o plus 8.7.. this is whre i got stock.. please help..
Click to expand...
Click to collapse
try again from the beginning when you first read this thread from the start..
============================================================================================
IF I HELP YOU WITH THIS... JUST A SIMPLE CLICK ON THANKS BUTTON... WILL GLADLY APPRECIATED!
ACTIONS SPEAK LOUDER THAN WORDS SO YOU MAY CLICK THANKS BUTTON RATHER THAN THANK ME ON REPLY...
have you insert the boot.img on your flash tool?
============================================================================================
IF I HELP YOU WITH THIS... JUST A SIMPLE CLICK ON THANKS BUTTON... WILL GLADLY APPRECIATED!
ACTIONS SPEAK LOUDER THAN WORDS SO YOU MAY CLICK
<<<<< THANKS BUTTON RATHER THAN THANK ME ON REPLY...
Stock with rooting o plus 8.7
What do you mean insert boot.img on flash tool? what i did is i click on the boot checkbox and inserted the boot.img... or you mean i should copy and paste boot.img on the folder of my flash tool? i tried both.. i get the same response.. I also tried holding the volume up while the red line is loading, also tried releasing the volume up but i still get the same response.. Is there any way? I really appreciate the response.. very...
---------- Post added at 03:57 AM ---------- Previous post was at 03:41 AM ----------
I was thinking I should just factory reset my phone and try the rooting it but that would be my last resort.. as much as possible i don't want to start customizing my phone from the nothing.. I'll wait for possible solutions.. ..
Preloader and DSP_BL needed please for Oplus 8.7 re-flashing...
To QYOBZ,
Can you provide me with proper Preloader and DSP_BL images for Oplus 8.7 android.?
Please, I really need help to those files because my back-up Preloader and DSP_BL images doesn't load up.
What should I do to load those 2 files properly?
I need it so that I can revive my bricked Oplus phone because I accidentally subjected the phone for Memory test when I used the SP Flash Tool. I used the same version of SP Flash Tool you have provided QYOBZ, can you help me with this please..!
Thanks!
First of All, thanks to developers for keeping us trouble free by working and modifications for our mobiles.
2nd ,this is not my work.I had collected from a Vietnamese site.i am just posting to help others if they are facing the problem (like me) in rooting and recovery of latest jelly bean update v30c for lg su640.
THIS IS INTENDED FOR LG OPTIMUS LTE (SU640) ONLY. PLEASE DON'T TRY ON OTHER LG OPTIMUS LTE VARIANTS
PROCEDURE:
1. make sure you have installed latest lg drivers
2. turn on the debugging option in settings/developers options
3.now connect the phone with computer, a pop up window appears on phone, select lg software there.
4.now go to the root v30c folder and run the bat file.and press any key to continue
5.message will appear on running window, now disconnect mobile from computer and turn of debugging mode for 5 seconds.
6.now turn on debugging mode again and connect the phone with computer and press any key to continue.
7.if all goes well, you will see a message that mobile is rooted, enjoy.
if it is rooted than go for cwm recovery installation.
1.run the ''run me.bat'' file placed in folder downloaded.
2. if every thing goes well, you will see some figures (numbers) in and out.if it is so, hurray, you have installed recovery properly.
mobile will reboot and go to recovery.
Quote:
***************************** CREDITS TO ALL THE DEVELOPERS *******************************
LINKS FOR FILES
JB ROOTING
https://docs.google.com/file/d/0BwuJnNfF1xTnb21pR1Z6NDNyeXc/edit
JB RECOVERY
http://www.mediafire.com/download/1j9zcbkahhakrb5/cwm_su_640.rar
rooting guide
213 views , no reply, no remarks, amazing
hahmad78 said:
213 views , no reply, no remarks, amazing
Click to expand...
Click to collapse
because this does not work at all
DevilMind007 said:
because this does not work at all
Click to expand...
Click to collapse
dear it works, because i am using it. i have flashed it many times .
links are not working or software????
DevilMind007 said:
because this does not work at all
Click to expand...
Click to collapse
i have checked again, links are working and so do the softwares.
you have used these yourself , haa haa
hahmad78 said:
dear it works, because i am using it. i have flashed it many times .
links are not working or software????
Click to expand...
Click to collapse
im on v30c via kdz file
but can't root
also had same issue when i was on v10i kdz with this
DevilMind007 said:
im on v30c via kdz file
but can't root
also had same issue when i was on v10i kdz with this
Click to expand...
Click to collapse
This one actually works, enjoy: http://forum.xda-developers.com/showthread.php?t=2291757
2nd post, also check out the 6th post to get the non-secure boot.IMG so system apps can be removed without bricking the phone.
Sent from my LG-P930 using xda app-developers app
Swetnes said:
This one actually works, enjoy: http://forum.xda-developers.com/showthread.php?t=2291757
2nd post, also check out the 6th post to get the non-secure boot.IMG so system apps can be removed without bricking the phone.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
get kdz file
http://csmgdl.lgmobile.com/swdata/WDLSW/LGSU640/ASKTBK/V30c_00/V30C_00.kdz
Repacked boot.img with insecure ramdisk to get rid of security error after removing system apps
https://dl.dropboxusercontent.com/u/12261361/insecure_boot.img
instruction:
rename as boot.img and put into sdcard root directory
type following adb commands
Code:
adb shell
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
reboot
NOTE/HELP:
how to use abd, i mean where is it in Win7 or inside android app?
thanks
DevilMind007 said:
get kdz file
http://csmgdl.lgmobile.com/swdata/WDLSW/LGSU640/ASKTBK/V30c_00/V30C_00.kdz
Repacked boot.img with insecure ramdisk to get rid of security error after removing system apps
https://dl.dropboxusercontent.com/u/12261361/insecure_boot.img
instruction:
rename as boot.img and put into sdcard root directory
type following adb commands
Code:
adb shell
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
reboot
NOTE/HELP:
how to use abd, i mean where is it in Win7 or inside android app?
thanks
Click to expand...
Click to collapse
It installs with the android SDK, Google it or adb.
Sent from my LG-P930 using xda app-developers app
it seems that your device drivers are not installed properly.install the device drivers , than follow the instructions, like turn on the usb de bugging mode in developer options and than connect the phone.and follow he instructions. i just checked these yesterday again.
dear, you problem has been solved or not. if not, than kindly tell me so that i could dig into this.
thanks for this! rooting does not seem to work, or I just don't understand Chinese? I rooted my phone using framaroot. the other file though works fine. it flashed a bootloader and a recovery image. very good indeed! thanks again.
Perfect!
hahmad78 said:
First of All, thanks to developers for keeping us trouble free by working and modifications for our mobiles.
2nd ,this is not my work.I had collected from a Vietnamese site.i am just posting to help others if they are facing the problem (like me) in rooting and recovery of latest jelly bean update v30c for lg su640.
THIS IS INTENDED FOR LG OPTIMUS LTE (SU640) ONLY. PLEASE DON'T TRY ON OTHER LG OPTIMUS LTE VARIANTS
PROCEDURE:
1. make sure you have installed latest lg drivers
2. turn on the debugging option in settings/developers options
3.now connect the phone with computer, a pop up window appears on phone, select lg software there.
4.now go to the root v30c folder and run the bat file.and press any key to continue
5.message will appear on running window, now disconnect mobile from computer and turn of debugging mode for 5 seconds.
6.now turn on debugging mode again and connect the phone with computer and press any key to continue.
7.if all goes well, you will see a message that mobile is rooted, enjoy.
if it is rooted than go for cwm recovery installation.
1.run the ''run me.bat'' file placed in folder downloaded.
2. if every thing goes well, you will see some figures (numbers) in and out.if it is so, hurray, you have installed recovery properly.
mobile will reboot and go to recovery.
Quote:
***************************** CREDITS TO ALL THE DEVELOPERS *******************************
LINKS FOR FILES
JB ROOTING
https://docs.google.com/file/d/0BwuJnNfF1xTnb21pR1Z6NDNyeXc/edit
JB RECOVERY
http://www.mediafire.com/download/1j9zcbkahhakrb5/cwm_su_640.rar
Click to expand...
Click to collapse
It worked perfectly for me
JB RECOVERY
http://www.mediafire.com/download/1j9zcbkahhakrb5/cwm_su_640.rar[/QUOTE]
link not working very well. DL stalls.
New thread opened with updated files plz visit below link
keep in mind using original settings i mean stock not settings given in flashable zip
http://forum.xda-developers.com/crossdevice-dev/sony/mod-xreality-supervivid-lollipop-t3117853
Getting force stopped man when trying to open display in setting
Plz give all the stock files to revert
(Req) I need sme folders from system/app
Iengine
Imageenchancer
Imageprocessorpermission
Intelligentbacklight
Intelligent rotation
Intelligent settings
Interface permissions
When Iam trying to port smartbacklight and smart rotation and smart call Iam getting bootloops so I deleted those files so pls send me above mentioned folders sme of them may not exist I think
pvnsai73 said:
(Req) I need sme folders from system/app
Iengine
Imageenchancer
Imageprocessorpermission
Intelligentbacklight
Intelligent rotation
Intelligent settings
Interface permissions
When Iam trying to port smartbacklight and smart rotation and smart call Iam getting bootloops so I deleted those files so pls send me above mentioned folders sme of them may not exist I think
Click to expand...
Click to collapse
only two of them exist those are related to image
i am sorry but non of above exist
and how come you getting force close i didnt had any issue with attached file for vivid
chauhanjayc said:
only two of them exist those are related to image
i am sorry but non of above exist
and how come you getting force close i didnt had any issue with attached file for vivid
Click to expand...
Click to collapse
Sry nw it works fine but "interface permissions" folder will be there bro in system/app
pvnsai73 said:
Sry nw it works fine but "interface permissions" folder will be there bro in system/app
Click to expand...
Click to collapse
here you go
Only Locked Bootloader or works in Unlocked Bootloader??
Didn't tested on ub
Can you test and update results
In my d5322 not working on unlocked bootloader... :'(
jacitdm said:
In my d5322 not working on unlocked bootloader... :'(
Click to expand...
Click to collapse
test it, works here http://forum.xda-developers.com/crossdevice-dev/sony/mod-xreality-supervivid-lollipop-t3117853
Thank you bro.. Its working super...
Do I need to root?
Do I need to unlock bootloader?.
Its working too for me but can't see any difference, I will try different angle... anyway thank you very much
Edit: Image enhancement working great, I see it now..... thanks again
vnnarendran said:
Do I need to root?
Do I need to unlock bootloader?.
Click to expand...
Click to collapse
yes...
no, not needed
Image enhancer.apk not install show error
Hi.. Could you make it flushable zip please
stuck at boot,followed procedures,what did I do wrong?Do i need to deodex my rom?Please help
video tutorial
if anyone want video tutoriial here it is
then just go to you tube and search for tech rajat and follow up the video in my channal
U are stuck in boot loop...
100% solution...
luckly we have a way to get out of it...
Dont worry. Just follow the following steps and your phone will shine like a new one...
The following procedure is fully trust worthy and not harmful. It is supported by sony itself.
Download the androxyde flashtool first..
From here...
https://userscloud.com/kb6tr3bcuecr?_e_pi_=7,PAGE_ID10,4795418019
Now download the official .ftf file for t2 ultra
The firmware is 5.0.2 lollipop sony official
(dont worry the file is fully official)
from here..
https://drive.google.com/file/d/0B1AAC4lt7nzONno1N09KRDNVSUk/view?usp=sharing
Now follow the following steps carefully...
1. Firstly force shut down your t2 ultra by pressing the soft key near the slot for sim card or by pressing the power and vol up button untill you feel vibr 3 times.
2. Install the flashtool.
Flashtool will automatically create few folders in c drive
3. Paste the downloaded ftf file into 'firmware' folder in c drive>>users>>(your user name)>>.flashtool>>firmware.
4. Open the flashtool and let the process complete.
(open 'flashtool x86')
5. Now minimise the flashtool and again go to the flashtool folder.
You will find a folder for 'flashtool drivers.'
run the containing file.
Now you need to install the drivers required for the process.
Select (check) drivers for 'fastboot,flashmode,xperia t2 ultra drivers'
Say 'install'
return back to flashtool...
5. Now while keeping vol up button of t2 ultra pressed connect the phone to computer using only the original sony usb data cable.
A green led will blink.
6. The flashtool will say 'device connected in flash mode'
7. Now click on 'black lightning thunder icon' on left top corner below 'file' section.
8. Say flashmode.
9. Now the flashtool will automatically detect the ftf file for t2 ultra. If not detected browse to the folder containing ftf file.
10. Now in the 'wipe' section in the right side of flashtool window 'check' all the options like wipe appslog, cache, data.
Now click on flash and stay calm till the process ends.
11. Now when the process ends the flashtool will say ' flash complet ' dont hurry!! Do not turn on your phone..
12. First disconnect your phone from pc. Do not close the flashtool.
And now again connect your phone to pc but this time while connecting your phone to pc keep volume 'down' button pressed. A blue led will glow.
13. Flashtool will say that 'device is connected in fastboot mode'.
14. Now again click on 'black thunder icon' but this time click on 'fastboot mode'
15. Number of options will appear. Select ''reboot to system''. And your phone will automatically turn on. Now unplug the cable and enjoy...
Sent from my D5322 using XDA Free mobile app
My this post may be considered as a sequel to my previous post about the easiest way to root t2 ultra dual {.472} {5.0.2}
Now the way to root our t2 ultra dual {5.1.1} {.182}:
Download the ftf file of latest firmware 19.4.A.0.182 (search on google)
Download latest version or V 0.8 of prf creator (search on google and get xda link)
Download SuperSU.zip (search on google)
Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.
Add ftf file and superSU.zip in prf creator
Mark all the boxes on right side of prf creator window
Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder
Copy this flashable zip and put it in root of SD card of your phone.
Now reboot your phone in recovery
after rebooting into recovery, follow in sequence:
Wipe
Advanced wipe
select:
cache
dalvik
system
data
internal memory
swipe to wipe
go back to recovery home
tap install
select external sd card
select that flashable zip
swipe to flash
wipe dalvik
reboot to system.
To install recovery:
Download latest nut's xzdr installer zip
Put it somewhere in your computer
Extract it, you will get a folder of same name
Connect your phone to pc in USB debugging mode
Open the extracted folder
Double click the windows installer batch file
Grant superuser access on your phone's screen
Follow the instructions on terminal
(press 1 on your pc as you have SuperSU in your phone)
After successful instalation of recovery, your phone will reboot into recovery.
Reboot the phone into system
.
.
Now you have a rooted 5.1.1 D5322 with latest Dual recovery.
This is not even close to simple dude..
This is what i did to root :
1. Copy SuperSU to sdcard
2. Flash DUAL_RECOVERY_D5322-LP.img
3. Install supersu then power off
4. Open flashtool and Flash STOCK KERNEL 5.1.1 ONLY KERNEL
5. REBOOT & VIOLA
there are few additions required for noob like me
To make work this method
Requirement :
Rooted D5322 with 4.x.x or 5.0.1 & working recovery installed.
To install recovery:
make sure that you have :
Enabled USB debugging
Enabled Unknown sources
r2rdcroix said:
This is not even close to simple dude..
This is what i did to root :
1. Copy SuperSU to sdcard
2. Flash DUAL_RECOVERY_D5322-LP.img
3. Install supersu then power off
4. Open flashtool and Flash STOCK KERNEL 5.1.1 ONLY KERNEL
5. REBOOT & VIOLA
Click to expand...
Click to collapse
When you tick all the boxes in prf creator, kernel gets added.
Sent from my D5322 using XDA Forums Pro.
rrd84 said:
there are few additions required for noob like me
To make work this method
Requirement :
Rooted D5322 with 4.x.x or 5.0.1 & working recovery installed.
To install recovery:
make sure that you have :
Enabled USB debugging
Enabled Unknown sources
Click to expand...
Click to collapse
Yeah I already said it's a sequel to my first post. In which you would see how to root D5322 on 5.0.2, and ofcourse recovery is needed. Thanks.
Sent from my D5322 using XDA Forums Pro.
Good work. But we know that this is not really easy. hehe
dropdan said:
Good work. But we know that this is not really easy. hehe
Click to expand...
Click to collapse
yeah!
Does this root 5.1.1 by 100%? Can we install Modded Play Store by this root method?
Need step by Step instructions please
Hello
I am a novice with many of the tools listed & the steps outlined, can somebody please help with step by step instructions,
maybe email me [email protected]
:good:
Thanks. For my XPERIA T2 ULTRA DUAL I had to made a change:
Instead of using the Recovery-Software you (rituraj_singh) offered I had to use the software (TWRP) recommended b abcdjdj in his post from 27th May 2014 ((D5322) Dual Recovery) on the XDA-Forum.
For the not-experienced Users of Androxyde Xperia Flash Tool: You can use the XperiFirm-Software (XI-Button in the Flash-Tool) and install the 5.0.1 (19.3.A.0.472)-Firmware from MELA Latin, but you have to overwrite also the Userdata and the Apps-Log, otherwise there are problems. After flashing use KingRoot to root your device, than replace kinguser using the batch-script of w0lfdroid.com (May 2015) placing the mrw-folder (included in the downloaded zip) on the intern memory (important) and executing it with Terminal Emulator. Than open SuperSu (installed by the script, not by you), and actualize the root-script. Afterwards reboot.
A Tip: After having installed the TWRP-Software on your phone you could have problems rebooting into the system, so prepare all and after having flashed the custom prf-rom on the device all would be function!
A step-by-step-Version (summary)
sachin.sachania said:
Hello
I am a novice with many of the tools listed & the steps outlined, can somebody please help with step by step instructions,
maybe email me [email protected]
:good:
Click to expand...
Click to collapse
Here comes a step-by-step-Version (summary) of all the "Posts"s needed for rooting Lollipop 5.1.1 on your Sony Xperia T2 Ultra (Dual).
The copyright is by the "Post"-authors like rituraj_singh and abcdjdj (I took the links to the posts nearby the description of the step) and by w0lfdroid.com, xperiafirmware.com and the software-producers.
I only wanted to create a step-by-step-summary. There is no garantuee which garantuees success using the summery! No responsability dad it does not destroy your mobilephone. Use it at your own risk! Thank you to the original "owners" of the posts. I hope the summary is ok for them! Otherwise contact me.
Time: maybe 1 hour or 2 hours
Tipp: if you until yet did not install Android 5.1.1 on your Xperia T2 Ultra Dual you do not have to follow the steps which are describing how to download the older Firmware via XperiFirm, but you should have installed the FlashTool just for the drivers (You won't use it directly). You can use the steps describing how to root the older Firmware using KingRoot, than continue with step 7.
1) Install the Androxyde FlashTool on your Computer: http://www.flashtool.net/downloads.php or found on the XDA-Forum, install the ADB-Packages (ADB, ADB-Drivers) on your Computer and make the ADB-Command part of the "path"-Variable of your Computers Terminal (see Google)
2) Install XperiFirm (cause easy for beginners): open the FlashTool and click on the "XF-button" near the "plus-in-a-square"-button and the "flash"-button.
3) After having installed the XperiFirm-Tool open it and click on "Xperia T2 Ultra (tianchi)" and select "D5322/XM50H (dual)"
4) Than click on the "Check-All"-Button over the Line "Latest Release"
5) Click on "MENA Latin" in the "Market"-Line and than on the "19.3.A.0.472 / R3C" and download it (having activated "unpack automatically")
6) Go to "xperiafirmware.com/8-firmware/58-sony-xperia-t2-ultra-dual-d5322" and download it (see chapter "1." on the website ), but do not flash it
7) Download the newest PRF-Creator (ZIP) from the following XDA-Forum-Link and unzip it: http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
8) Download the newest SuperSU-ZIP from chainfire (https://download.chainfire.eu/696/SuperSU). and paste the ZIP in the unzipped PRF-Creator-folder: https://download.chainfire.eu/696/SuperSU
9) Now copy the .ftf-file (Firmware) downloaded from xperiafirmware.com also in the unzipped PRF-Creator-folder and open the PRF-Creator.exe
10) The PRF-Creator asks for the .TFT-File (select the one you downloaded from xperiafirmware.com) and for the SuperSU-ZIP-File (select the one downloaded from chainfire)
11) Select in the "Include"-field: "Kernel"; "FOTA-Kernel"; "Modem" and "LTALable", also "Sign ZIP" and "Legacy Mode"
12) Click create and wait until finished
13) Copy the created "flashable-prerooted.zip" from your unzipped PRF-Creator-Folder to the external SD-Card of your Device
14) BackUp your mobilephone using the "Sony PC Companion" or simular software like Wondershare's "MobileGo"
14a) Control if you have unlocked your Boatloader (normally it's locked) and if it's locked, go to the "Sony Mobile Developers Unlock Bootloader Website" and follow the instructions there Important: You could have to install ADB and Sony's ADB-Drivers (find ADB using google) and the Sony FlashTool "Emma" will not work with the Xperia T2 Ultra Dual
15) Shut down your phone and start it holding the "Volume-down"-Button while plugging in the USB-Cable (it won't show more than a black screen)
16) Close "XperiFirm", wait until it finished and then click on the "Flash"-Button and select in the new window "Flashmode" and "OK" (obviously)
17) Select the Firmware you downloaded before with XperiFirm (19.3.A.0.472) and select in the "Wipe"-Field: "APPS_LOG" and "USERDATA" (!!!important!!! otherwise problems)
18) Click on the "Flash"-Button and wait until it's done (sometimes the flashtool has problems with the files - dont worry: shutdown the FlashTool and retry it once more)
19) Unplug the mobilephone from the USB-Cable, start it and follow the instructions
20) After having prepared the mobilephone go to "kingroot.net/wap/download" and download KingRoot (sometime trouble with the site, try it once more)
21) Afterwards enable the DeveloperMode (settings - About Phone - click "build number" 7 times) and enable the "unknown sources" (settings - Security - unknown sources)
22) Install KingRoot and root your Xperia T2 Ultra Dual
23) Install "Terminal Emulator" from the Google Play-Appstore to your device and open it
24) Go to "http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html" and download the newest "Replace KingUser with SuperSU.zip" and unpack it to your device's intern memory (!!!important!!! otherwise no function)
25) In the Terminal Emulator App enter "su" for gaining "root"-access ("Enter" obviously), than enter "sh /sdcard/mrw/root.sh" and wait until it finish (it will open SuperSU)
26) Actualize the file as requested by SuperSU and, after having had success, reboot your mobilephone
27) Install a Root-Checker-App from Google Play Store and control, if you see a window from "SuperSU", otherwise repeat the last steps
28) Go to "https://goo.gl/lg6I2t" or visit directly the XDA-Forum-Post of abcdjdj (http://forum.xda-developers.com/showthread.php?t=2764408) and download his "TWRP-KK-T2_DUAL-V3.img" or newer
29) Shut down your mobilephone. Afterwards hold the "Volume-Up"-Button while plugging in the USB-Cable (it shows only a black screen) and connect it to the Computer
30) Check if you have installed all fastboot drivers for your device, then open the "Command Line" of your Computer "as Administrator" and enter: "fastboot flash boot (path-to-the-file-downloaded-in-the-last-step)/TWRP-KK-T2_DUAL-V3.img" and click obviously "Enter"
31) Now unplug your mobilephone, than hold the "Volume-down"-Button and the "Power"-Button at the same time: TWRP-Recovery will start
32) Select "Wipe", than "Advanced Wipe", than select "intern. memory", "dalvik", "cache", "data" and "system"
33) Swipe to Wipe
34) Go to TWRP's home (twice times the "back"-Button) and select "Install", than "external SD-Card" and select "flashable-prerooted.zip" and confirm the warning, than SWIPE to INSTALL (flashing)
35) Wipe the Dalvik-Cache
36) Reboot into System and follow your mobilephone's instructions
37) Install a Root Checker App from Google Play Store and control if it's rooted, afterwards install the backup of your mobilephone made at the beginning
38) Install "Titanium Backup" and disinstall (after having done a backup of the app you want to delete) Apps you do not want
39) Install "Link-to-SD" from GooglePlay, prepare your external SD-Card with a partition manager (using your Computer) and copy all possible apps completly to the SD-Card
This works on T2 ULTRA D5306 Single SIM
theokon said:
Here comes a step-by-step-Version (summary) of all the "Posts"s needed for rooting Lollipop 5.1.1 on your Sony Xperia T2 Ultra (Dual).
Click to expand...
Click to collapse
Well my friend, first at all, this is a awsome guide, it really help me to load the 5.1.1 on my SP. I Must said that even if this looks
overwhelming at the begining, it's pretty easy to do it.
Just for the FeedBack, this method works in:
T2 Ultra D5306 Single SIM, TELCEL.
I use the US CUSTOM Stock ROM 5.1.1 ( 19.4.A.0.182 ), if ask for the FTF, look at the FTF MEGAPOST.
Thanks to @rituraj_singh for find this method and @theokon to make the Easy-Mode Guide.
This thread must being Sticky.
PS: You have to add one step: When you reboot after the Flash, it can take a while in start the smartphone, It is to prevent panic if they see it takes a lot time to start, they might think it is bricked and try to restart it. :good:
This works great for rooting the phone (D5322) but for me link2sd doesn't read the 2nd partition and keeps giving me unable to mount errors.
virgilone2 said:
This works great for rooting the phone (D5322) but for me link2sd doesn't read the 2nd partition and keeps giving me unable to mount errors.
Click to expand...
Click to collapse
You got the error when you try to mount on /dev/block/mmcblk1p2 ? it and said that the mount fail?
I had that error as well, maybe you have to try this @virgilone2:
1.- Uninstall the Link2SD.
2.- Install the SD MAID and run it, clean it up.
3.- Reinstall the Link2SD.
4.- Install the Recovery (I use this) [ XZDualRecovery 2.8.21 ] or the same you use in the guide.
5.- Run the Recovery, and go to Wipe > Advance Wipe > Davik Cache, Swipe to Wipe, after it ends go to Reboot > System.
6.- Before your smartphone start as usual, going to pop one little window with a counter, wait to end (Maybe take a while).
7.-Run you Link2SD, it have to Mount the ext2 partition and ask for reboot, if isnt the case, just recreate the mount script.
8.- Enjoy your Link2SD in Lollipop 5.1.1 :good:
This works for me, i hope works for you as well
Windows 10 Driver Problems
When having updated to Windows 10 driver problems could happen.
When entering "fastboot devices" in your computer's terminal and nothinh happens it is like this.
You can solve this easily:
1) Plug in your phone in fastboot mode into the computer (Volume Up + Plug-In of the USB-cable)
2) Go to the"Devices manager" (or called simular, as I don't know how to translate it correctly), where you will find the unknown S1 fastboot driver.
3) Download the official Sony flashing tool "EMMA" and reinstall the "Android Studio" in order to get the correct drivers
4) For security download also the "Universal ADB Drivers Package" from chip.de and install it
5) Back in the Device Manager reinstall the correct driver selecting it from the drivers list (!): Sony SA0110 - ADB Interface driver
rituraj_singh said:
My this post may be considered as a sequel to my previous post about the easiest way to root t2 ultra dual {.472} {5.0.2}
Now the way to root our t2 ultra dual {5.1.1} {.182}:
Download the ftf file of latest firmware 19.4.A.0.182 (search on google)
Download latest version or V 0.8 of prf creator (search on google and get xda link)
Download SuperSU.zip (search on google)
Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.
Add ftf file and superSU.zip in prf creator
Mark all the boxes on right side of prf creator window
Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder
Copy this flashable zip and put it in root of SD card of your phone.
Now reboot your phone in recovery
after rebooting into recovery, follow in sequence:
Wipe
Advanced wipe
select:
cache
dalvik
system
data
internal memory
swipe to wipe
go back to recovery home
tap install
select external sd card
select that flashable zip
swipe to flash
wipe dalvik
reboot to system.
To install recovery:
Download latest nut's xzdr installer zip
Put it somewhere in your computer
Extract it, you will get a folder of same name
Connect your phone to pc in USB debugging mode
Open the extracted folder
Double click the windows installer batch file
Grant superuser access on your phone's screen
Follow the instructions on terminal
(press 1 on your pc as you have SuperSU in your phone)
After successful instalation of recovery, your phone will reboot into recovery.
Reboot the phone into system
.
.
Now you have a rooted 5.1.1 D5322 with latest Dual recovery.
Click to expand...
Click to collapse
worat guide i ever seen in xda !!
no links !!
manojkumar8552 said:
worat guide i ever seen in xda !!
no links !!
Click to expand...
Click to collapse
Well thanks!! Links needed to perform the steps suggested are everywhere in the realm of Internet. Uploading same thing again and again is waste of space,data and everything. Hope you understand.
Ftf can be downloaded through xperi-firm and recovery can be downloaded from nut's Xperia files website. SuperSU is already available in more than 1000 places on Internet. And prf creator is created by a certain developer which is already available on xda. So reposting his item might be considered as kinda theft/plagiarism. And this is already mentioned in this post that it's a sequel of previous post. So please do your own bit of work/home work before posting negative comments.
Sent from my D5322 using XDA Forums Pro.
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
manojkumar8552 said:
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
This post is a sequel of previous post. To perform the steps mentioned you need to be on earlier versions of Android. Like 5.0.2 or earlier. And recovery must be installed in that. If you're on 5.0.2 follow my post about how to root on 5.0.2.
Sent from my D5322 using XDA Forums Pro.
manojkumar8552 said:
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
Well.. You can use KingRoot v 4.5.2*to root 5.1.1 and for SuperSU follow my previous post.
Sent from my D5322 using XDA Forums Pro.