Help
after flashing SSpeed kernal my phone not booting.No led flashing no bootloops nothing,it is just black..I flashed the kernal using fastboot mode in SDK and it shown success.after that I tried to switch on It just vibrated once and gone dead..mine is a Xperia SL stock .45 firmware and I just unlocked the Bootloader before this process..
will following this method will work for me..?I had hard reseted my phone now and I had it connected to my wall charger.no reaction till now ( half an hour). Is this process correct or i have to try anything before that..
Please help meee..:crying::crying::crying:
Update: I have been getting red led constantly for the past 15 hours..When i connect to the laptop it continues to flash red led..I could not enter either fastboot or flash mode..Only red ligt flashing constantly no bootloops no sony logo. do i still need more time to charge or any other techneique..anybody had the same problem? please help me guys I'm Very depressed..:crying::crying::crying:
Flash another kernel (preferably stock) and it should boot. Had the same problem with my S when I first tried to switch kernels, hope you aren't as panicked as I was
Sent from my LT30p using xda app-developers app
AliAlsuhail said:
Flash another kernel (preferably stock) and it should boot. Had the same problem with my S when I first tried to switch kernels, hope you aren't as panicked as I was
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
The problem is my phone not even detected in flash mode or fastboot mode..I have put it on the charge for almost 4 hrs now no led comes up..I dont know i'm in the right process.this is what i did after dead..
First hatd reset i.e. Holding pwr and Vol up for 3 vibrations then I put it in the charge..Is this the way to do or any other way is there please help me out to get my phone back
Hmmmm weirded, mine wasn't charging as well but it was detected in fastboot. Anyway wish you luck
Sent from my LT30p using xda app-developers app
AliAlsuhail said:
Hmmmm weirded, mine wasn't charging as well but it was detected in fastboot. Anyway wish you luck
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
Bro now I'm getting red light while charging..What should I do now..how much time I have to wait and do i need to flash the stock kernal or the entire stock firmware..if so where can i find the stock kernel..
Only kernel is needed, try this : http://forum.xda-developers.com/showthread.php?t=2024182 (maybe v1 because it's nearest to stock)
Sent from my LT30p using xda app-developers app
AliAlsuhail said:
Only kernel is needed, try this : http://forum.xda-developers.com/showthread.php?t=2024182 (maybe v1 because it's nearest to stock)
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
Mine was .45 firmware before it was gone..Will .55 work on it..?And another bad news red light gone now if i disconnect and reconnect after some time it again comes and goes after some mins but it never gets into fastboot or flash modes...
Thanks for your kind Replies...
Sorry dude that's the limit of my knowledge on this... Hope you figure it out.
Sent from my LT30p using xda app-developers app
Now after 12 hours of continuous charging it has the red light on continuously..I don know what to do next if anybody can help it will be appreciated..
imranfarookj said:
Now after 12 hours of continuous charging it has the red light on continuously..I don know what to do next if anybody can help it will be appreciated..
Click to expand...
Click to collapse
Even my phone got bricked after flashing SSpeed kernel by krabappel. You can try charging it for more time until you get the SONY logo and your phone starts bootlooping or you get a green led. You can try doing, but I don't think that you will get anything except a red led. Also, try going into either download or fastboot mode once your phone is charged and try flashing the stock kernel. If you get into download mode(green led) then in flashtool tick all boxes which say exclude system, exclude baseband ... but leave exclude kernel ticked. If you get into fastboot, flash the attached stock kernel of XSL in fastboot. Use this command - fastboot -i 0x0fce flash boot kernel.sin
It is the 100% stock kernel taken from Xperia SL LT26ii's stock .55 FTF. Good luck
Also, you have to extract kernel.zip to get the kernel.sin file as we can't upload .sin files directly on XDA.
abcdjdj said:
Even my phone got bricked after flashing SSpeed kernel by krabappel. You can try charging it for more time until you get the SONY logo and your phone starts bootlooping or you get a green led. You can try doing, but I don't think that you will get anything except a red led. Also, try going into either download or fastboot mode once your phone is charged and try flashing the stock kernel. If you get into download mode(green led) then in flashtool tick all boxes which say exclude system, exclude baseband ... but leave exclude kernel ticked. If you get into fastboot, flash the attached stock kernel of XSL in fastboot. Use this command - fastboot -i 0x0fce flash boot kernel.sin
It is the 100% stock kernel taken from Xperia SL LT26ii's stock .55 FTF. Good luck
Also, you have to extract kernel.zip to get the kernel.sin file as we can't upload .sin files directly on XDA.
Click to expand...
Click to collapse
Thanks for the reply..but before my phone was dead it was running .45 firmware..is it safe to flash the .55 kernal over it..?
imranfarookj said:
Thanks for the reply..but before my phone was dead it was running .45 firmware..is it safe to flash the .55 kernal over it..?
Click to expand...
Click to collapse
It should be. Btw, SSpeed is also for .55fw just in case you didn't know so I don't think that it should be a problem. Once you flash the kernel, let the phone charge for some time then go ahead and flash the entire .55 fw with flashtool.
abcdjdj said:
It should be. Btw, SSpeed is also for .55fw just in case you didn't know so I don't think that it should be a problem. Once you flash the kernel, let the phone charge for some time then go ahead and flash the entire .55 fw with flashtool.
Click to expand...
Click to collapse
Thanks Dude I'll try it and inform here if it works.
after 4 hrs of constant Red led I removed the wall charger and plugged my phone in my laptop it was still flashing constant red led for 15 mins and now it turned off..I did not get any boot loops till now..How much time it will take to get the bootloops and what should I do next..:crying:
imranfarookj said:
after 4 hrs of constant Red led I removed the wall charger and plugged my phone in my laptop it was still flashing constant red led for 15 mins and now it turned off..I did not get any boot loops till now..How much time it will take to get the bootloops and what should I do next..:crying:
Click to expand...
Click to collapse
Even I had the same problem bro. If you are willing to open your phone and disconnect the battery maybe your phone will come back to life.
Sent from my GT-P3100 using xda app-developers app
abcdjdj said:
Even I had the same problem bro. If you are willing to open your phone and disconnect the battery maybe your phone will come back to life.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I tried all Possibilities on so many threads..Connect to charger till it gets constant red Led and tried to connect it to the laptop to get it into bootloops but it did not worked..Red led is flashing constantly and it turns off after some time then again it turns on and it stays until i unplug it..
I am willing to open my phone bro..
What should I do Bro please help me out..I dont have any warranty to it..Please tell the steps I have to follow..
I am facing this problem just because i flashed a kernel SSpeedmod that too said my device is supported..:crying::crying:
imranfarookj said:
I tried all Possibilities on so many threads..Connect to charger till it gets constant red Led and tried to connect it to the laptop to get it into bootloops but it did not worked..Red led is flashing constantly and it turns off after some time then again it turns on and it stays until i unplug it..
I am willing to open my phone bro..
What should I do Bro please help me out..I dont have any warranty to it..Please tell the steps I have to follow..
I am facing this problem just because i flashed a kernel SSpeedmod that too said my device is supported..:crying::crying:
Click to expand...
Click to collapse
Here see this video for opening it - http://m.youtube.com/watch?feature=related&v=2OqQdwTtB_E
Sent from my GT-P3100 using xda app-developers app
abcdjdj said:
Here see this video for opening it - http://m.youtube.com/watch?feature=related&v=2OqQdwTtB_E
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
What should I do after removing the back part..Do i need to remove the battery as shown in the video..?
imranfarookj said:
What should I do after removing the back part..Do i need to remove the battery as shown in the video..?
Click to expand...
Click to collapse
Just check if there is some kind of a ribbon attachment or something. If not then just remove the battery and put it back in. Or else disconnect and reconnect the ribbon cable.
abcdjdj said:
Just check if there is some kind of a ribbon attachment or something. If not then just remove the battery and put it back in. Or else disconnect and reconnect the ribbon cable.
Click to expand...
Click to collapse
After that process how much time I have to wait..Should i assemble and try to charge again..At what point Should I remove the charger and connect to the Pc..
Thanks for your whole hearted replies..:angel:
Related
Hi, i need help.....my arc is dead.
In my arc i had installed Xperia ultimate 3.0.2 with kernel vengeance 1.3.2.
Now my arc no signs of life and flashtool does not recognize it ..... I do not know what to do.
help me: Pianto:
mapazzutu said:
Hi, i need help.....my arc is dead.
In my arc i had installed Xperia ultimate 3.0.2 with kernel vengeance 1.3.2.
Now my arc no signs of life and flashtool does not recognize it ..... I do not know what to do.
help me: Pianto:
Click to expand...
Click to collapse
What do you mind is bootloop???
Well, tell us, what did you do exactly. And be more precise over your phone - what happens if you turn it on, what does it do? Any lights, anything on screen, vibrations?
Sent from LT18i with custom firmware by myself.
Someguyfromhell said:
Well, tell us, what did you do exactly. And be more precise over your phone - what happens if you turn it on, what does it do? Any lights, anything on screen, vibrations?
Sent from LT18i with custom firmware by myself.
Click to expand...
Click to collapse
Ok, (bootloader is unlock) one day my arc turn off, now nothing vibrations, nothing lights, don't charge, nothing all is dead, flashtool dont see the phone.
mapazzutu said:
Ok, (bootloader is unlock) one day my arc turn off, now nothing vibrations, nothing lights, don't charge, nothing all is dead, flashtool dont see the phone.
Click to expand...
Click to collapse
do you try flashing on flashtool. in my case if myphone dead i try flashing ftf from falshtool and work.
trying this.
1. select ftf stock rom
2. try flashing ur phone
hope your phone back on live :good: or give more detail like screenshoot and cronologies for some more help in this forum...
I can't flash my phone because flashtool don't see my arc
mapazzutu said:
Hi, i need help.....my arc is dead.
In my arc i had installed Xperia ultimate 3.0.2 with kernel vengeance 1.3.2.
Now my arc no signs of life and flashtool does not recognize it ..... I do not know what to do.
help me: Pianto:
Click to expand...
Click to collapse
wow, how could it be
never have that kind of problem so far after flashing roms and kernels
maybe you could try this
http://forum.xda-developers.com/showthread.php?t=1322827
although I dont have any idea how it works
thks i read your post but for me is very difficulty.....i'm italian and my english is very bad
mapazzutu said:
thks i read your post but for me is very difficulty.....i'm italian and my english is very bad
Click to expand...
Click to collapse
find a friend who can understand english .than try this link, if i was on your place i use google translate or what ever it takes to fix my phone. so here you go use google translate to understand this post and try fixing your problem.
i know its hard but try
http://forum.xda-developers.com/showthread.php?t=1322827
mapazzutu said:
Ok, (bootloader is unlock) one day my arc turn off, now nothing vibrations, nothing lights, don't charge, nothing all is dead, flashtool dont see the phone.
Click to expand...
Click to collapse
Were you using your phone when this occurred?
I've got a similar problem yesterday
the solution was to boot the phone in 'fastboot' mode (keep pressing menu button then insert the usb cable), the indication light should glow in blue
then using fastboot.exe you can flash a new kernel (i used lupos kernel)
Sent from my GT-P3110 using xda app-developers app
no i didn't using my arc
makhkobek said:
I've got a similar problem yesterday
the solution was to boot the phone in 'fastboot' mode (keep pressing menu button then insert the usb cable), the indication light should glow in blue
then using fastboot.exe you can flash a new kernel (i used lupos kernel)
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
i'm sorry but flashtool don't see my arc, so i can't flash a new kernel
mapazzutu said:
i'm sorry but flashtool don't see my arc, so i can't flash a new kernel
Click to expand...
Click to collapse
Also not in fastboot mode?
I know this will sound kind of stupid but have you tried charging your phone in case the battery is flat.
Sent from my LT18i using xda premium
I had just successfully rooted my xperia play r800i and was installing CWM. After the installation was successful, I unplugged the phone as Flashtools said but it won't start. Now it's not even being detected by Flashtools. It is being detected by my laptop only with the beep sound and nothing else.
Also my battery was around 20% while I was flashing so maybe that had something to do with it.
Waiting for help by a generous XDA member, again.
Thanks in advance!
AkifMehmood said:
I had just successfully rooted my xperia play r800i and was installing CWM. After the installation was successful, I unplugged the phone as Flashtools said but it won't start. Now it's not even being detected by Flashtools. It is being detected by my laptop only with the beep sound and nothing else.
Also my battery was around 20% while I was flashing so maybe that had something to do with it.
Waiting for help by a generous XDA member, again.
Thanks in advance!
Click to expand...
Click to collapse
Flash stock rom again
If ur phone doesn't have charge , charge it for one hour then flash stock rom
Sent from my R800i using xda premium
raminta said:
Flash stock rom again
If ur phone doesn't have charge , charge it for one hour then flash stock rom
Sent from my R800i using xda premium
Click to expand...
Click to collapse
I charged it for about 2 hours not flashtools wont detect it when I try to hold the back button while inserting the USB cable
AkifMehmood said:
I charged it for about 2 hours not flashtools wont detect it when I try to hold the back button while inserting the USB cable
Click to expand...
Click to collapse
if u have unlocked bootloader try to change ur kernel
and reinstall drives of ur phone maybe it can solve the problem that flashtools doesnt detect ur phone
raminta said:
if u have unlocked bootloader try to change ur kernel
and reinstall drives of ur phone maybe it can solve the problem that flashtools doesnt detect ur phone
Click to expand...
Click to collapse
But the screen is not even turning on. It's not responding to holding the back and power button
AkifMehmood said:
But the screen is not even turning on. It's not responding to holding the back and power button
Click to expand...
Click to collapse
Do you have working fastboot pull battery insert and then hold search key while plugin usb cable to computer if the led turns blue then you can flash another kernel !!
nakuk21 said:
Do you have working fastboot pull battery insert and then hold search key while plugin usb cable to computer if the led turns blue then you can flash another kernel !!
Click to expand...
Click to collapse
I tried but its not giving the blue led
my xperia s(lt26i) is dead, no led notification, i had installed cm 10 unofficial, i was not getting service, so i installed v20 baseband from recovery, after tat it dint boot, i tried all the combinations to enter into fastboot mode to flash, but dint work, plzzzzz some one help me, phone does not respond to anything, even if kept for charge,,
Try the debrick package within this forum. Don't have much else to offer I'm afraid.
Sent from my LT26i using xda premium
aftab712 said:
my xperia s(lt26i) is dead, no led notification, i had installed cm 10 unofficial, i was not getting service, so i installed v20 baseband from recovery, after tat it dint boot, i tried all the combinations to enter into fastboot mode to flash, but dint work, plzzzzz some one help me, phone does not respond to anything, even if kept for charge,,
Click to expand...
Click to collapse
Plug the phone in the wall charger. The phone battery will die then start to charge again. mine took about 2 full days before it showed red led. It all depends on how full ur battery was when it soft bricked tho..
Xperia LT28at running BlackZax'7 JB. 211
IceyYou2 said:
Try the debrick package within this forum. Don't have much else to offer I'm afraid.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
i TRIED TO UNBRICK, NO USE
derrickdroid said:
plug the phone in the wall charger. The phone battery will die then start to charge again. Mine took about 2 full days before it showed red led. It all depends on how full ur battery was when it soft bricked tho..
Xperia lt28at running blackzax'7 jb. 211
Click to expand...
Click to collapse
i have connected to wall charger, lets see what happens, but had removed the battery once, n inserted again, still same, if i connect charger without battery, red blinking light appears
derrickdroid said:
plug the phone in the wall charger. The phone battery will die then start to charge again. Mine took about 2 full days before it showed red led. It all depends on how full ur battery was when it soft bricked tho..
Xperia lt28at running blackzax'7 jb. 211
Click to expand...
Click to collapse
its charging now, red light, what i have to do now to flash
aftab712 said:
its charging now, red light, what i have to do now to flash
Click to expand...
Click to collapse
I'd flash stock firmware now... You don't have to do something special. After that your phone should be working again.
Pryx said:
I'd flash stock firmware now... You don't have to do something special. After that your phone should be working again.
Click to expand...
Click to collapse
phone does not go to fastboot mode, in flastool it shows
04/018/2013 23:18:24 - INFO - Device connected with USB debugging off
04/018/2013 23:18:24 - INFO - For 2011 devices line, be sure you are not in MTP mode
aftab712 said:
phone does not go to fastboot mode, in flastool it shows
04/018/2013 23:18:24 - INFO - Device connected with USB debugging off
04/018/2013 23:18:24 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
Try to repair your phone with SUS
Sent from my LT28h using xda premium
avik6123 said:
Try to repair your phone with SUS
Sent from my LT28h using xda premium
Click to expand...
Click to collapse
it does not detect my phone, (SUS),,, and also i have unlocked my bootloader
aftab712 said:
phone does not go to fastboot mode, in flastool it shows
04/018/2013 23:18:24 - INFO - Device connected with USB debugging off
04/018/2013 23:18:24 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
You should go to flashmode, not to fastboot. It's volume down i think. BTW did blue led appear when you tried fastboot?
aftab712 said:
its charging now, red light, what i have to do now to flash
Click to expand...
Click to collapse
Plug it into computer while holding volume up. A green light should appear. You are then ready to flash the ftf file.
Xperia LT28at running BlackZax'7 JB. 211
derrickdroid said:
Plug it into computer while holding volume up. A green light should appear. You are then ready to flash the ftf file.
Xperia LT28at running BlackZax'7 JB. 211
Click to expand...
Click to collapse
Ghosh ull confuse him.Volume down button z for flashmode with green led.Try flashing stock ftf in flashmode.If flashtool z showing device connected then there's definitely hope
Sent from my LT26ii using xda premium
we have same problem please help. i already removed the battery and charge to xternal charger but still cnt detect from sus pc companion and flashtool.
RISHI RAJ said:
Ghosh ull confuse him.Volume down button z for flashmode with green led.Try flashing stock ftf in flashmode.If flashtool z showing device connected then there's definitely hope
Sent from my LT26ii using xda premium
Click to expand...
Click to collapse
Sorry im an ion user here. Its volume up for us.
Xperia LT28at running BlackZax'7 JB. 211
derrickdroid said:
Sorry im an ion user here. Its volume up for us.
Xperia LT28at running BlackZax'7 JB. 211
Click to expand...
Click to collapse
vollume down or up, both are not working ,led is red or no light,i m really tensed abt phone, its my friends phone, i have bricked it...i have no money to buy him now,
derrickdroid said:
Sorry im an ion user here. Its volume up for us.
Xperia LT28at running BlackZax'7 JB. 211
Click to expand...
Click to collapse
Volume up is for fastboot (blue led), volume down for flashmode (green led) I'm ion user too...
aftab712 said:
vollume down or up, both are not working ,led is red or no light,i m really tensed abt phone, its my friends phone, i have bricked it...i have no money to buy him now,
Click to expand...
Click to collapse
Are you pressing it BEFORE you connect it ? You've got to press it before you connect it and keep pressing it until you connect it and green led appear. Because if you press it after you connected it, nothing will happen, phone will be just charging
vollume down or up, both are not working ,led is red or no light,i m really tensed abt phone, its my friends phone, i have bricked it...i have no money to buy him now,
Aftab bhai click on ''flashmode'' donot connect the phone via cable.... Press up button.. Keep pressing it and then connect the data cable to ur pc and see if it's showing some light or not. If volume up doesn't work then try volume down .I hope it surely will work
Sent from my MT27i using xda premium
abhinav.mhjn said:
Aftab bhai click on ''flashmode'' donot connect the phone via cable.... Press up button.. Keep pressing it and then connect the data cable to ur pc and see if it's showing some light or not. If volume up doesn't work then try volume down .I hope it surely will work
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
dint work bro
hello dudes.. i read most of the threads here i just wanna make sure i'm doin things right.
i was trying to flash the .211 firmware's kernel so i can root the new one, flashtool kept saying that i don't have the drivers and couldnt start in fastboot mode.. i tried several times, and i did a hard reset a couple of times.
now the phone won't start up at all in any mode.. no led no nothing.
the battery was about 90% before this happened..
I read about the rubber band thingy and it's been connected to pc for a couple of hours now and still nothing, what should i do?
plz help me..
is your bootloader unlocked?
also if you're flashing a stock kernel from a stock ftf using flashtool its flash mode, not fastboot
Sent from my AOSP 4.3 Xperia S via Tapatalk
Ben36 said:
is your bootloader unlocked?
also if you're flashing a stock kernel from a stock ftf using flashtool its flash mode, not fastboot
Sent from my AOSP 4.3 Xperia S via Tapatalk
Click to expand...
Click to collapse
I have a relocked bootloader.. yea sorry i meant flash mode..
i've been trying the rubber band trick for eight hours now and still nothing.. should i just open it up and reset the battery?
heart_of_life said:
I have a relocked bootloader.. yea sorry i meant flash mode..
i've been trying the rubber band trick for eight hours now and still nothing.. should i just open it up and reset the battery?
Click to expand...
Click to collapse
does your phone viabrate when "power+volume up" is held
if yes then unplug your XS then hold "power+volume up" till your phone buzzes 3 times, then try to flash a FW with flashtool
(take note this may take up to 60 secconds before it viabrates)
if no then please visit the link below
http://forum.xda-developers.com/showthread.php?t=1849170
It didn't do anything at all, but after 30 hours of applying the rubber band with no response, I hooked it to the wall charger and it gave me the red led, I waited for 30 minutes then flashed the kernel in flashtool and charged it again, then turned it on and it's back to life.
Thanks alot
Sent from my LT26i using xda premium
lucky! what a pain they can be!
Sent from my AOSP 4.3 Xperia S via Tapatalk
Hey guys its been a week..I am carrying my bricked device which show red led and continuous bootloop after I charged my battey for half and hour..so i wanna flash stock kernel.sin as my device was relocked bootloader..if anyone have it ...plz kindly provide me..thanks in advance...
I don't have it bro. But of you consider hard resetting it and charge it until it shows up red led and flashing original firmware by flashtool might help you.
fernoct said:
I don't have it bro. But of you consider hard resetting it and charge it until it shows up red led and flashing original firmware by flashtool might help you.
Click to expand...
Click to collapse
i did each and every possible way..but no luck..i too disassamble my mobile and remove the battery chip but no luck...but loop is still persisting..
1.Firstly you should charge your phone for 36-48 hrs
2.don't turn it on
3.On ur pc, open flashtool n tap on flash button
4.when it asks for phone, plug your phone with pressing volume down button
5.wait for flashtool to recognize ur phone
6.then flashing will be done
Hope this will work in your case..as i had same problem before
Sent from my LT28h using XDA Premium 4 mobile app
i had this problem the other day...when the it boot loops hard reset it then leave it to charge till red led appears and then disappears...when the red led disappears apply the rubberband trick and connect your phone to your pc with the flashtool waitin to flash your phone eventually it wud go into flash mode...dont attempt to flash the system on the first try...flash the kernel then leave it to charge on a wall charger until you get a greed led and then flash the TFT fully
@fernoct @XrosMaster @prat.cena @pharix @Zorbeyd
Thanks guys for your coperation...your ideas help me a lotz... Finally had to diassamble my phone and charge via external voltage kit through powerchip..and my battery level was upgraded and I was able to rwcover my mobile back...
Once again thanks for your coperation...
Sent from my LT28h using Tapatalk