I unlocked via test point so I don't have fastboot . Aka I need to flash via flashmode . So I will need .ftf .sin does anyone know how I could unpack the boot.im g and repack to ftf and sin? I believe I need zimage and ramdisk.cpio.gz to do this from the image I used rom kitchen and it gave me split image and a ram disk file tried it with a packer but it didn't work. Any help would rock I thought of putting this in q and a but I thought this would be more appropriate since it is a development oriented question.
Sent from my R800i using xda app-developers app
psxpetey said:
I unlocked via test point so I don't have fastboot . Aka I need to flash via flashmode . So I will need .ftf .sin does anyone know how I could unpack the boot.im g and repack to ftf and sin? I believe I need zimage and ramdisk.cpio.gz to do this from the image I used rom kitchen and it gave me split image and a ram disk file tried it with a packer but it didn't work. Any help would rock I thought of putting this in q and a but I thought this would be more appropriate since it is a development oriented question.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
take a look on here
http://mytechencounters.wordpress.com/2012/06/12/how-to-create-an-ftf-file-of-your-xperia-ics-firmware/
Wrong sect. Meh...
Regards,
Sdojoin
sdojoin said:
Wrong sect. Meh...
Regards,
Sdojoin
Click to expand...
Click to collapse
My bad lols
Sent from my LT28i using xda app-developers app
myktlanxl said:
take a look on here
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Click to expand...
Click to collapse
Thanks I wasnt aware decrypt worked with boot.img I appreciate your answer
Sent from my LT28i using xda app-developers app
myktlanxl said:
take a look on here
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Click to expand...
Click to collapse
Doesn't work
Sent from my R800i using xda app-developers app
Related
my son got hold of my phone and basically bricked it. whats the chance of a link to this fw 4.0.2.a.0.42 so i can try and fix it thanks
You can try using Wotanserver, because the link on XDA that I found seems to be down
thanks ill try
just thought i wud add that i have used wotanserver before to flash stock roms. works well.
pastysmasher2 said:
my son got hold of my phone and basically bricked it. whats the chance of a link to this fw 4.0.2.a.0.42 so i can try and fix it thanks
Click to expand...
Click to collapse
The link to the firmware is already available on the development forums. Download it and flash with flashtool if you're bootloader unlocked.
Sent from my R800i using XDA App
its only had super user app installed i did it to free up some space will it still flash back to stock mate
I have it on my desktop if you need it I will upload it.
Sent from my R800i using Tapatalk
fma965 said:
I have it on my desktop if you need it I will upload it.
Sent from my R800i using Tapatalk
Click to expand...
Click to collapse
any chance you could upload it 4 me? Link in development is indeed down
nevermind, found it. thanks anyways
where did you find it?
esedust said:
where did you find it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1589399&highlight=stock
You're welcome
Technologic797 said:
The link to the firmware is already available on the development forums. Download it and flash with flashtool if you're bootloader unlocked.
Sent from my R800i using XDA App
Click to expand...
Click to collapse
You don't have to have your bootloader unlocked to use flashtool it works for all
Sent from my R800a using XDA App
Here is the change log (sry you need to download first)
https://www.box.com/shared/3jstr3qap75bkhrqk93z
Can help me?Got so so much problem :crying:
Sent from my LT28h using xda premium
UchihaDareNial said:
Here is the change log (sry you need to download first)
https://www.box.com/shared/3jstr3qap75bkhrqk93z
Can help me?Got so so much problem :crying:
Sent from my LT28h using xda premium
Click to expand...
Click to collapse
Update to last Flash TOOL !!!!
UchihaDareNial said:
Here is the change log (sry you need to download first)
https://www.box.com/shared/3jstr3qap75bkhrqk93z
Can help me?Got so so much problem :crying:
Sent from my LT28h using xda premium
Click to expand...
Click to collapse
better you can update to latest flashtool Version 0.9.10.1 or check exclude TA. then lets see how it goes.
redjge said:
better you can update to latest flashtool Version 0.9.10.1 or check exclude TA. then lets see how it goes.
Click to expand...
Click to collapse
anyhow ... is jumping TA... so that is not the problem
Sent from my Vodafone Smart II using xda app-developers app
I was messing around with my phone n I accidently deleted all my files inside: "/system/media/audio/ui/" if you can direct me to a link where I can download all the jb 4.1.1 files within "audio/" would be much appreciated.
Just download one if the cwm flashable tw based ROMS and use 7zip to pull them out if it
Like he said just extract the folder from this ROM .
http://forum.xda-developers.com/showthread.php?t=2161667
Sent from my SGH-T999 using xda premium
Makoers said:
Like he said just extract the folder from this ROM .
http://forum.xda-developers.com/showthread.php?t=2161667
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
mrhaley30705 said:
Just download one if the cwm flashable tw based ROMS and use 7zip to pull them out if it
Click to expand...
Click to collapse
Yea, that was my last resort. Thnx for the help anyways :thumbup:
Sent from my SAMSUNG-SGH-I747 using xda premium
How do I go back to stock..I accidently deleted my back up lol I know stupid me haha but it'd be much appriciated !!!
Sent from my LG-E980 using xda app-developers app
And I have the at&t version
Sent from my LG-E980 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=2272177
Sent from my LG-E980 using XDA Premium 4 mobile app
Thank you. Much appreciated
Sent from my LG-E980 using xda app-developers app
androidbeast503 said:
Thank you. Much appreciated
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
ok that's to complicated for me, can someone just upload there stock rom or make a flashable zip so I can just flash it thru TWRP
androidbeast503 said:
ok that's to complicated for me, can someone just upload there stock rom or make a flashable zip so I can just flash it thru TWRP
Click to expand...
Click to collapse
Not that simple... Just follow the guide takes 15min...
No flashable zips of stock. You need to use the lgflashtool. It is not that hard if you follow instructions.
There is a flashable zip but you need to be on stock for it to work. Do some searching and reading.
Sent from my LG-E980 using XDA Premium 4 mobile app
So I'm at the part where I have to right click on the LGE980_20130314_LGFLASHv151.rar file and install/register it..when I click on register it says the module "c:\LG electronics\LGNP…\LGE980_20130314_LGFLASHv151.rar" may not be compatible with the version of windows that you're running. Check if the module is compatible with an x86(32-bit) or x64(64-bit) version of regsvr32.exe. So now I'm really confused lol
Sent from my LG-E980 using xda app-developers app
androidbeast503 said:
ok that's to complicated for me, can someone just upload there stock rom or make a flashable zip so I can just flash it thru TWRP
Click to expand...
Click to collapse
androidbeast503 said:
So I'm at the part where I have to right click on the LGE980_20130314_LGFLASHv151.rar file and install/register it..when I click on register it says the module "c:\LG electronics\LGNP…\LGE980_20130314_LGFLASHv151.rar" may not be compatible with the version of windows that you're running. Check if the module is compatible with an x86(32-bit) or x64(64-bit) version of regsvr32.exe. So now I'm really confused lol
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
Cause your not following the guide. You DONT register the DLL file. You use the DLL file within the Flashtool
hyelton said:
Cause your not following the guide. You DONT register the DLL file. You use the DLL file within the Flashtool[/
then why does it say to register it in the guide? lol
Click to expand...
Click to collapse
androidbeast503 said:
hyelton said:
Cause your not following the guide. You DONT register the DLL file. You use the DLL file within the Flashtool[/
then why does it say to register it in the guide? lol
Click to expand...
Click to collapse
It doesn't.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
OK your right I was reading the wrong guide till I found yours.
Sent from my Optimus G Pro using xda app-developers app
Can anybody please explain me how to get boot.img?
Sent from my C1904 using XDA Premium 4 mobile app
giridhargp said:
Can anybody please explain me how to get boot.img?
Sent from my C1904 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What do you want to do with it?
If you're serious with it, you should visit the Android general and dev sections and read at least 10 post about it before asking in a device-specific section.
Sent from my Sony Xperia M (C1905)
alvinhochun said:
What do you want to do with it?
If you're serious with it, you should visit the Android general and dev sections and read at least 10 post about it before asking in a device-specific section.
Sent from my Sony Xperia M (C1905)
Click to expand...
Click to collapse
I need it for android kitchen
And I did a lot of research on this,but I didnt get for my device,thats why am asking
Sent from my C1904 using XDA Premium 4 mobile app
giridhargp said:
I need it for android kitchen
And I did a lot of research on this,but I didnt get for my device,thats why am asking
Sent from my C1904 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you are making a custom STOCK based rom for xperia devices you dont need boot.img
Do this
1.put baserom.zip in original_update folder
2.start the kitchen and select make working folder it will ask to create a fake boot.img say yes and at the last the boot.img will deleted
I hope i have helped
dipesh1502 said:
If you are making a custom STOCK based rom for xperia devices you dont need boot.img
Do this
1.put baserom.zip in original_update folder
2.start the kitchen and select make working folder it will ask to create a fake boot.img say yes and at the last the boot.img will deleted
I hope i have helped
Click to expand...
Click to collapse
Thank u,but How to get baserom.zip.i hav ftf file,from which I have extracted sytem and meta folders,where is baserom.zip
Sent from my C1904 using XDA Premium 4 mobile app
giridhargp said:
Thank u,but How to get baserom.zip.i hav ftf file,from which I have extracted sytem and meta folders,where is baserom.zip
Sent from my C1904 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey mate
Try this
http://forum.xda-developers.com/showthread.php?t=2183077
This wil help u to make a flashable zip of ftf
Once u have made the zip place it in original_update and make working folder using kitchen
Rest all things the kitchen will do
dipesh1502 said:
Hey mate
Try this
http://forum.xda-developers.com/showthread.php?t=2183077
This wil help u to make a flashable zip of ftf
Once u have made the zip place it in original_update and make working folder using kitchen
Rest all things the kitchen will do
Click to expand...
Click to collapse
Thanks a lot
Sent from my C1904 using XDA Premium 4 mobile app
giridhargp said:
Thanks a lot
Sent from my C1904 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Happy to help