Hi all,
I have a Galaxy S3 already and have been following this forum for a while, but I have never had problems with it as with this one. It's about my Galaxy S4 mini DUOS (i9192). I've bough the phone from an unofficial seller because i9192 was never supposed to be imported in Croatia (EU). The phone came with I9192XXUAMF7 build and modem. Today I've expereinced that the phone was running fine but I couldn't make any calls and nobody could call me untill I've taken out the battery and SIM. It was runnign on one SIM only. Network was OK and signal was full. I' would like to change the modem to see if that's the problem.
My question is - has anyone experienced anything similar or has changed the XXUAMF7 modem? I'm located in Croatia (Europe) and the closest country modem localisation is Ukraine. Should I change it to Ukraine modem?
|Vyp| said:
Hi all,
I have a Galaxy S3 already and have been following this forum for a while, but I have never had problems with it as with this one. It's about my Galaxy S4 mini DUOS (i9192). I've bough the phone from an unofficial seller because i9192 was never supposed to be imported in Croatia (EU). The phone came with I9192XXUAMF7 build and modem. Today I've expereinced that the phone was running fine but I couldn't make any calls and nobody could call me untill I've taken out the battery and SIM. It was runnign on one SIM only. Network was OK and signal was full. I' would like to change the modem to see if that's the problem.
My question is - has anyone experienced anything similar or has changed the XXUAMF7 modem? I'm located in Croatia (Europe) and the closest country modem localisation is Ukraine. Should I change it to Ukraine modem?
Click to expand...
Click to collapse
I find Ukraine/Russia/Afghanistan/Uzbekistan Modem/Rom combo best in my region ( Romania )
Take care tho latest roms contain Knox bootloader Either flash one that have bootloader removed that i posted on this forum, or u can try the rom i use
SilviuMik said:
I find Ukraine/Russia/Afghanistan/Uzbekistan Modem/Rom combo best in my region ( Romania )
Take care tho latest roms contain Knox bootloader Either flash one that have bootloader removed that i posted on this forum, or u can try the rom i use
Click to expand...
Click to collapse
Thanks for the notice! I have SGS 3 and it has no Knox bootloaders so I'm not familiar with it but from what I've read it's a no no. My original bootloader is stock Samsung. No Knox icons in download mode. I just might try your ROM. Have been reading about it just a few minutes ago.
I've been listing sammobile FWs and it gives me Russian and Ukrainian ROMs. You're suggesting I give one of them "a spin"?
|Vyp| said:
Thanks for the notice! I have SGS 3 and it has no Knox bootloaders so I'm not familiar with it but from what I've read it's a no no. My original bootloader is stock Samsung. No Knox icons in download mode. I just might try your ROM. Have been reading about it just a few minutes ago.
I've been listing sammobile FWs and it gives me Russian and Ukrainian ROMs. You're suggesting I give one of them "a spin"?
Click to expand...
Click to collapse
Yes BUT ! Do not download any firmware that have MK4 MK5 ML1 ML2 ML4 NA2 in name They contain Knox bootloader
Hello, This is my first ever post on this website. Please bear with me if it's too long or confusing.
I have a Galaxy Note II I317. It's basically an AT&T phone but when I insert SIM from another carrier (e.g. H2O) it doesn't ask me for an unlock code. Moreover, I have an unlock code from AT&T as well.
The phone shows full signal strength for the mobile carrier. However, I'm unable to send sms or make a phone call. Whenever I try to place a call, it says "emergency calls only". I tried this in USA and now I'm in Pakistan.
Here, I encountered the same problem. We have five major networks here in Pakistan. Ufone, Zong, Telenor, Mobilink and Warid. I tried with Ufone, Warid and Telenor. The phone works OK with Telenor but experienced the above problem with Warid and Ufone. I have rooted the phone, downgraded to 4.1.1. and then back to 4.4.2. However, nothing seems to work. Mobile repair shops are also of no help. If anyone has any idea, I will really appreciate this.
Model Number: SAMSUNG-SGH-I317
Android Version: 4.4.2
Baseband Version: I317UCUCNE5
Kernel Version: 3.0.31-1728680 [email protected] #1
Build Number: KOT49H.I317UCUCNE5
Serial Number: R21CA5HRQPP
Device Status: CUSTOM
Hi,
You can try this thread, and ask about it here if you wish,
http://forum.xda-developers.com/showthread.php?t=2037017
Good luck!
I have tried this method but I don't get the option "now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ".
I looked around on internet for this problem and found that this methods works with 4.1.1 and below. Moreover, this is for mobiles which ask for an unlock code. My Galaxy Note II doesn't ask for an unlock code.
I will have your thread moved then to your device section, so the experts who own your device can help.
?
I currently have the US s20Ultra unlocked model on ATT (don't foresee changing carriers). Currently I am missing features like VoLTE and VVM. What other features would I be missing if I stay on the unlocked firmware? Can I flash the ATT firmware to get those missing features? Can I flash back to unlock?
Thank you
What's the CSC on your device?
varcor said:
What's the CSC on your device?
Click to expand...
Click to collapse
I am not sure what I am looking for. Its currently on ATT/ATT.
Open your dialer, enter *#1234#, press the Dial Icon. You'll see CSC: G98??, the next 3 letters will be your device's CSC Code. Your Service Provider's CSC is "ATT" which is different than the CSC in your device. Whether or not you can change the CSC depends on your device's CSC. Device firmware is always configured for the specific, original CSC or Multi CSC's.
This post may be the best workaround.
https://forum.xda-developers.com/showpost.php?p=82444733&postcount=8
varcor said:
Open your dialer, enter *#1234#, press the Dial Icon. You'll see CSC: G98??, the next 3 letters will be your device's CSC Code. Your Service Provider's CSC is "ATT" which is different than the CSC in your device. Whether or not you can change the CSC depends on your device's CSC. Device firmware is always configured for the specific, original CSC or Multi CSC's.
This post may be the best workaround.
https://forum.xda-developers.com/showpost.php?p=82444733&postcount=8
Click to expand...
Click to collapse
My CSC: G988U1OYM1ATE4
garyHal said:
My CSC: G988U1OYM1ATE4
Click to expand...
Click to collapse
Your device has Multiple CSC's which are included in OYM so you should be able to change your CSC to ATT, which is the CSC for AT&T.
Go to "Settings" then "About phone". Write down your IMEI Number. Open dialer and enter *#272*IMEInumber# (In the thread replace IMEInumber with your actual IMEI Number). Press the Dial Icon, you should see a screen with the list of available CSC codes for your device. Select ATT and tap the Install option.
Be aware your firmware isn't AT&T, it's unbranded so even if you change the CSC, full call functionality may not be available. You can obtain AT&T's firmware at SamMobile.
https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/SM-G988U1/ATT/
varcor said:
Your device has Multiple CSC's which are included in OYM so you should be able to change your CSC to ATT, which is the CSC for AT&T.
Go to "Settings" then "About phone". Write down your IMEI Number. Open dialer and enter *#272*IMEInumber# (In the thread replace IMEInumber with your actual IMEI Number). Press the Dial Icon, you should see a screen with the list of available CSC codes for your device. Select ATT and tap the Install option.
Be aware your firmware isn't AT&T, it's unbranded so even if you change the CSC, full call functionality may not be available. You can obtain AT&T's firmware at SamMobile.
https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/SM-G988U1/ATT/
Click to expand...
Click to collapse
Varcor, thank you so much for all the directions.
As it stands right now, it is already on ATT. Once I flash over to the ATT firmware, would I be able to flash back to an unbranded one in the future, for whatever reason? Additionally, do I have to stay on the ATT firmware to retain those features? Or could just having my phone communicate with ATT at least once with my "branded" phone and then flash back retain those features?
garyHal said:
Varcor, thank you so much for all the directions.
As it stands right now, it is already on ATT. Once I flash over to the ATT firmware, would I be able to flash back to an unbranded one in the future, for whatever reason? Additionally, do I have to stay on the ATT firmware to retain those features? Or could just having my phone communicate with ATT at least once with my "branded" phone and then flash back retain those features?
Click to expand...
Click to collapse
You're most welcome. Yes, flashing back to unbranded won't be a problem. I don't think you will be able to retain the features if you go back to the unbranded firmware, it's not configured to allow full call feature functionality. Also, after flashing to the AT&T firmware you may need to contact their CSR for external programing. Good luck!
S20+ AT&T
Hi Varcor,
I'm new in this firmware things. I'm from Singapore and has been using S20 Exynos, but due to the extreme heat, bad battery life,etc. I've decided to import S20+ Snapdragon from AT&T, according to the Service provider SW ver information, it's showing as SAOMC_SM-G986U-OYN_ATT_QQ_0023 (I believe this means the set are unlocked).
With that said, I noticed that the software is outdated and the security patch level is on February 1,2020. when I referring to the AT&T website, It's showing as the latest software is QP1A.190711.020.G986USQU1ATE6 (June update) and mine still on QP1A.190711.020..G986USQU1ATAW (February). My CSC is G986UOYN1ATAW.
My question now is, whenever I tried to hit the software update, it's keep telling me that my software is up to date. Is there's a reason why it's wont detect the update? If it's because I'm in Singapore not US, then there's no choice that I need to flash using the firmware from Sammobile. The problem is which one that I need to download as AT&T carrier is not listed there. There's only T-mobile, Sprint, Unknown, USA. Please help.
https://www.sammobile.com/samsung/galaxy-s20-plus/firmware/#SM-G986U
Raigar said:
Hi Varcor,
I'm new in this firmware things. I'm from Singapore and has been using S20 Exynos, but due to the extreme heat, bad battery life,etc. I've decided to import S20+ Snapdragon from AT&T, according to the Service provider SW ver information, it's showing as SAOMC_SM-G986U-OYN_ATT_QQ_0023 (I believe this means the set are unlocked).
With that said, I noticed that the software is outdated and the security patch level is on February 1,2020. when I referring to the AT&T website, It's showing as the latest software is QP1A.190711.020SAOMC_SM-G986U-OYN_ATT_QQ_0023 (June update) and mine still on QP1A.190711.020..G986USQU1ATAW (February). My CSC is G986UOYN1ATAW.
My question now is, whenever I tried to hit the software update, it's keep telling me that my software is up to date. Is there's a reason why it's wont detect the update? If it's because I'm in Singapore not US, then there's no choice that I need to flash using the firmware from Sammobile. The problem is which one that I need to download as AT&T carrier is not listed there. There's only T-mobile, Sprint, Unknown, USA. Please help.
https://www.sammobile.com/samsung/galaxy-s20-plus/firmware/#SM-G986U
Click to expand...
Click to collapse
I would reach out to SamMobile and inquire why they're not listing the AT&T Firmware Update. You state your CSC is G986UOYN1ATAW. That CSC is also associated with T-Mobile. You're not using an AT&T SIM Card, correct? On a Multi-CSC Device when you insert a different SIM, the device should update to the correct Service Provider. If you're using a SIM from a Service Provider other than AT&T you probably won't receive AT&T Software Updates, which are distributed by Samsung, not AT&T via OTA.
varcor said:
I would reach out to SamMobile and inquire why they're not listing the AT&T Firmware Update. You state your CSC is G986UOYN1ATAW. That CSC is also associated with T-Mobile. You're not using an AT&T SIM Card, correct? On a Multi-CSC Device when you insert a different SIM, the device should update to the correct Service Provider. If you're using a SIM from a Service Provider other than AT&T you probably won't receive AT&T Software Updates, which are distributed by Samsung, not AT&T via OTA.
Click to expand...
Click to collapse
I did try to reach them, but for some reason they are giving me some irrelevant answer. Something like "You probably don't get OTA-updates (otherwise you got them already from AT&T)". We are having a conversation breakdown there, I think they are not an english speaker (or my english is just bad). Really? that CSC is associated with T-Mobile? now I'm getting more confused because the box is stated AT&T and it's sealed.
I'm using Singapore SIM card (Singtel), so you were saying this set I'm using right now is a Multi-CSC device? If i were to flash to the other carrier firmware, will it create any problem?
Raigar said:
I did try to reach them, but for some reason they are giving me some irrelevant answer. Something like "You probably don't get OTA-updates (otherwise you got them already from AT&T)". We are having a conversation breakdown there, I think they are not an english speaker (or my english is just bad). Really? that CSC is associated with T-Mobile? now I'm getting more confused because the box is stated AT&T and it's sealed.
I'm using Singapore SIM card (Singtel), so you were saying this set I'm using right now is a Multi-CSC device? If i were to flash to the other carrier firmware, will it create any problem?
Click to expand...
Click to collapse
Flashing Singtel Firmware won't work since it's configured for the Exynos SoC. Multi-SIM Devices have only regional Service Providers available, you don't have Singtel as an option in an AT&T device. Based on your situation I would consider one of two options. The first would be insert an AT&T SIM just for OTA updates. Not sure if you received an AT&T SIM when you purchased the device, if you didn't they're not hard to find. The second and likely best option is sell the device and purchase a Global Variant with a Snapdragon SoC, you'll receive updates regardless of your Service Provider. If it makes you feel any better there's lots of users in the same predicament. They want the Snapdragon device in regions selling mainly Exynos devices. Workarounds are in many situations are challenging,
varcor said:
Your device has Multiple CSC's which are included in OYM so you should be able to change your CSC to ATT, which is the CSC for AT&T.
Go to "Settings" then "About phone". Write down your IMEI Number. Open dialer and enter *#272*IMEInumber# (In the thread replace IMEInumber with your actual IMEI Number). Press the Dial Icon, you should see a screen with the list of available CSC codes for your device. Select ATT and tap the Install option.
Be aware your firmware isn't AT&T, it's unbranded so even if you change the CSC, full call functionality may not be available. You can obtain AT&T's firmware at SamMobile.
https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/SM-G988U1/ATT/
Click to expand...
Click to collapse
Varcor
I have the exact same phone and using the same network as garyHal, unlocked 988U1/OYM/ATT.
I got my bootloader unlocked and decided to apply the ATT firmware (
G988U1UES1BTJ2). My CSC was already ATT so I didn't perform the csc install step.
After setting the phone up as new, it still seems like its running the unlocked mode. I don't see any kind of branding or extra ATT stuff that may have been downloaded. How do I verify that I have the right firmware and CSC set to ATT?
Thank you.
itchyUnder said:
Varcor
I have the exact same phone and using the same network as garyHal, unlocked 988U1/OYM/ATT.
I got my bootloader unlocked and decided to apply the ATT firmware (
G988U1UES1BTJ2). My CSC was already ATT so I didn't perform the csc install step.
After setting the phone up as new, it still seems like its running the unlocked mode. I don't see any kind of branding or extra ATT stuff that may have been downloaded. How do I verify that I have the right firmware and CSC set to ATT?
Thank you.
Click to expand...
Click to collapse
How did you manage to unlock your bootloader since US Snapdragon variants are locked down pretty tight? I don't think the firmware is dedicated to ATT, it's Multi CSC, designed to function with a number of US Carriers. You should be delighted you're not suffering with ATT bloatware! To check the Active CSC go to About Phone, Settings, Software Information, Service Provider SW ver. On the bottom string the first three letters are the Active CSC on your device. You can review this article for additional information on Firmware and CSC's.
CSC and Home_CSC | All You Need to Know About ODIN Samsung Flash
Here is all you need to know about the CSC and Home_CSC.What exactly is a Firmware?A firmware is nothing but a permanent software which is programme
www.getdroidtips.com
varcor said:
How did you manage to unlock your bootloader since US Snapdragon variants are locked down pretty tight? I don't think the firmware is dedicated to ATT, it's Multi CSC, designed to function with a number of US Carriers. You should be delighted you're not suffering with ATT bloatware! To check the Active CSC go to About Phone, Settings, Software Information, Service Provider SW ver. On the bottom string the first three letters are the Active CSC on your device. You can review this article for additional information on Firmware and CSC's.
CSC and Home_CSC | All You Need to Know About ODIN Samsung Flash
Here is all you need to know about the CSC and Home_CSC.What exactly is a Firmware?A firmware is nothing but a permanent software which is programme
www.getdroidtips.com
Click to expand...
Click to collapse
If I am reading it correctly, this is what I am seeing:
ATT/ATT/XAA
I am happy that I don't have the ATT bloatware but I also feel that ATT is locking me out of some of their features because I don't have a "branded" phone, such as wifi call or visual voicemail. Am I misunderstanding your post from above, #6, that flashing ATT firmware would give me the carrier features?
Additionally, does the firmware determine what frequency bands I am using and if I am taking full advantage of ATT's offerings?
itchyUnder said:
If I am reading it correctly, this is what I am seeing:
ATT/ATT/XAA
I am happy that I don't have the ATT bloatware but I also feel that ATT is locking me out of some of their features because I don't have a "branded" phone, such as wifi call or visual voicemail. Am I misunderstanding your post from above, #6, that flashing ATT firmware would give me the carrier features?
Additionally, does the firmware determine what frequency bands I am using and if I am taking full advantage of ATT's offerings?
Click to expand...
Click to collapse
Flashing ATT Dedicated Firmware would give you the best chance for additional call features ASSUMING your Ulocked Device is capable of incorporating those features. It should do the trick since the hardware is identical to an ATT device. I would head to an ATT Store to get a definitive answer. Samsung has made it more and more challenging to mix and match branded and unlocked devices with CSC or Firmware modifications. In many cases you won't know until you try. Users want their smartphones to be smart, to work perfectly in every situation but the major carriers use proprietary tools to hold clients hostage.
varcor said:
Open your dialer, enter *#1234#, press the Dial Icon. You'll see CSC: G98??, the next 3 letters will be your device's CSC Code. Your Service Provider's CSC is "ATT" which is different than the CSC in your device. Whether or not you can change the CSC depends on your device's CSC. Device firmware is always configured for the specific, original CSC or Multi CSC's.
This post may be the best workaround.
https://forum.xda-developers.com/showpost.php?p=82444733&postcount=8
Click to expand...
Click to collapse
Please bro i need a help
My note 20 ultra is ATT unlocked
Because I'm not in united state
But in section about phone
My model is N986U note U1
am searching sammobil to udate my phone to android 13
I found nothing at&t with my model number N986U
Only N986U1
What should I do to update to android 13
This should do the trick.
Download Samsung Galaxy Note 20 Ultra 5G SM-N986U USC USA (US Cellular) firmware
All Samsung firmwares for Galaxy Note 20 Ultra 5G in USA (US Cellular) with model code SM-N986U. We offer free and fast download options. Check them out now.
www.sammobile.com
romano_ezzat said:
Please bro i need a help
My note 20 ultra is ATT unlocked
Because I'm not in united state
But in section about phone
My model is N986U note U1
am searching sammobil to udate my phone to android 13
I found nothing at&t with my model number N986U
Only N986U1
What should I do to update to android 13
Click to expand...
Click to collapse
Download Samsung Galaxy Note 20 Ultra 5G SM-N986U USC USA (US Cellular) firmware
All Samsung firmwares for Galaxy Note 20 Ultra 5G in USA (US Cellular) with model code SM-N986U. We offer free and fast download options. Check them out now.
www.sammobile.com
varcor said:
This should do the trick.
Download Samsung Galaxy Note 20 Ultra 5G SM-N986U USC USA (US Cellular) firmware
All Samsung firmwares for Galaxy Note 20 Ultra 5G in USA (US Cellular) with model code SM-N986U. We offer free and fast download options. Check them out now.
www.sammobile.com
Click to expand...
Click to collapse
I misunderstanding
What a trick bro
It's a link for firmware updates
I need to know which one compatible with my note
And after flash will still unlocked?
Hello,
I am new to the unlocking stuff.
I just bought a used ATT Note10+ 5G in Malaysia, model SM-N976U
However the security patch was stuck in May 2020. It could not be updated over the internet or Smart Switch PC.
It says it is the latest s/w (the latest should be July 2020)
I checked Sammobile and discovered 2 firmware updates : USA(TMK) and USA (T-mobile)(TMB)
(tried to include sammobile link here but was disallowed due to new user status)
Which firmware is suitable for my phone?
Is there a way to unlock ATT and receive the normal monthly security update over the internet automatically?
(i saw Odin in youtube and have basic idea how to flash it)
Appreciate any advice. Thank you
SCitta said:
Hello,
I am new to the unlocking stuff.
I just bought a used ATT Note10+ 5G in Malaysia, model SM-N976U
However the security patch was stuck in May 2020. It could not be updated over the internet or Smart Switch PC.
It says it is the latest s/w (the latest should be July 2020)
I checked Sammobile and discovered 2 firmware updates : USA(TMK) and USA (T-mobile)(TMB)
(tried to include sammobile link here but was disallowed due to new user status)
Which firmware is suitable for my phone?
Is there a way to unlock ATT and receive the normal monthly security update over the internet automatically?
(i saw Odin in youtube and have basic idea how to flash it)
Appreciate any advice. Thank you
Click to expand...
Click to collapse
A thread already exists with the answers to your questions.
https://forum.xda-developers.com/galaxy-note-10+/how-to/att-note-10-5g-n976u-firmware-files-t4059721
No unbranded firmware version exists as of yet.. so you will have to flash a carrier specific firmware.
https://forum.xda-developers.com/showpost.php?p=81981925&postcount=3
Thank for for the link provided.
Based on the link information, i can download the 4 base files from sammobile (either TMK or TMB) and add USERDATA ATT N976USQS3BTF4 to flash it.
Is that correct?
I could find USERDATA ATT N976USQS3BTF4 in easy-firmware website with a purchase fee.
(editied: My phone Active CSC Code is XAA, CSC Country is USA)
SCitta said:
Hello,
I am new to the unlocking stuff.
I just bought a used ATT Note10+ 5G in Malaysia, model SM-N976U
However the security patch was stuck in May 2020. It could not be updated over the internet or Smart Switch PC.
It says it is the latest s/w (the latest should be July 2020)
I checked Sammobile and discovered 2 firmware updates : USA(TMK) and USA (T-mobile)(TMB)
(tried to include sammobile link here but was disallowed due to new user status)
Which firmware is suitable for my phone?
Is there a way to unlock ATT and receive the normal monthly security update over the internet automatically?
(i saw Odin in youtube and have basic idea how to flash it)
Appreciate any advice. Thank you
Click to expand...
Click to collapse
Hi SCitta,
Fellow Malaysian having the same problem as you. But my problem now is that I have Odin and the latest firmware (XAA) but Odin is showing failed to establish connection. How did you do it with yours?
Am using the AT&T version of the Note 10+.
KhairilH said:
Hi SCitta,
Fellow Malaysian having the same problem as you. But my problem now is that I have Odin and the latest firmware (XAA) but Odin is showing failed to establish connection. How did you do it with yours?
Am using the AT&T version of the Note 10+.
Click to expand...
Click to collapse
Never experienced the failed connection before.
Have you installed the SAMSUNG-drivers ? The Samsung Smart Switch PC installation might help to fix the drivers.
Hello everyone I am Malian and I live in Mali I recently bought a n976U locked by at & t since when I was putting a chip from an operator from here I was getting network unlock code So I looked for a way to unlock it for free if possible its like that I stumbled across your forum and read your posts and saw the code * # 272 * Imei # like we could try to change d 'operator with therefore when I put my chip it says "Invalid Sim card inserted" if I try to retype * # 272 * ... # it comes out nothing I'm lost please help me s 'please if possible of course Thank you
#123
Just want to share my experience in this. Bought an ATT N976U from the US and using in Malaysia. Phone came with XAA/XAA/ATT and never received OTA updates.
Downloaded Google phone app and changed CSC to TMB/TMB/ATT using *#*#27262826#*#*
Voila. Received the OTA updates one by one since May2020. Am now on N976USQU5EUC2.
Volte is also working on Celcom.
Did not have to flash firmware. Data not wiped. Everything seemed to be working normal apart from "Tips and Help" in settings crashes every time I click it. Also phone boots with T-Mobile logo now.