Related
Hi,
In general I am very happy with my new TP2, however, I keep forgetting to press the lock button (hold down the call end buttoun until it vibrates) prior to pussing the power button and putting it in the case.
Does anyone know of a way of adding this function to the power button, so that it automatically locks?
richkidd said:
Hi,
In general I am very happy with my new TP2, however, I keep forgetting to press the lock button (hold down the call end buttoun until it vibrates) prior to pussing the power button and putting it in the case.
Does anyone know of a way of adding this function to the power button, so that it automatically locks?
Click to expand...
Click to collapse
If you use S2U2 you get this functionality, I don't know how to do it with normal screen lock.
Dave
Or if you use Throttle Lock you can use a pattern to unlock your device, and you can set it up that when you push the powerbutton it gets locked with the pattern, or that when you push the powerbutton it will wait a x given minutes and then your device get's locked with a pattern.
I don't know how to do it with normal screen lock.
i have this on mine dont know how i got it take it came with some app i have installed
Anyone know how to fix this so that the phone's standard lock autolocks? Tried throttle etc but I still really like the simplicity of the normal phonelock, just need to get it to do it by itself.
Homescreen plusplus (Batterystatus) has this option. You can select lock on standby, it uses normal wm lock app. Used it on my Wizard, not sure if it's compatible with the TP2...
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm
aiaob said:
Anyone know how to fix this so that the phone's standard lock autolocks? Tried throttle etc but I still really like the simplicity of the normal phonelock, just need to get it to do it by itself.
Click to expand...
Click to collapse
Use TouchLockPro as locking utility. Automatically locks at power on and unlocks by light sensor. And you can configure a key unlock sequence. And with a slide to answer solution, you can only lock the hardware keys at incoming call.
if you simply press the power button that switches off the screen and locks all buttons.
uilt-in WM feature.
If you set a password it also automatically locks it
how do you enable ALL BUTTONS UNLOCK ?
in older devices there was an option somewhere in the keys section, now only the power button turns the phone on,. i want all the keys to turn it on, since i use the s2u2...
thanx
otohabibi said:
how do you enable ALL BUTTONS UNLOCK ?
in older devices there was an option somewhere in the keys section, now only the power button turns the phone on,. i want all the keys to turn it on, since i use the s2u2...
thanx
Click to expand...
Click to collapse
When not removed from ROM you will find it as \Windows\keylock.exe
Otherwise try: http://forum.xda-developers.com/showpost.php?p=5875933&postcount=5
I am still looking for auto lock at suspend. I don't want to install a program bringing with it 100.000 functions.
I dont see the point in adding extra features to a lock screen. its there to keep the screen locked and thats it lol
Anyways, try 'lock device GUI'
It just adds the function to lock the device when the power button is pushed (Sleep).
Keeps the old lock screen, only adds function
Yea check out LockDevice. I use it and it works great..
http://forum.xda-developers.com/showthread.php?t=542482
DeviceLock.cab Works As Well...
I had similar issue. So I installed "DeviceLock.cab" and added it as a Quick Link on HCT Sense 2.5 Homescreen. Now I just have to click on the link to lock the device. Once the screen if off the keys don't matter.
Also used "Lock Screen With Bottom Slider" for easy access.
I can't post links, but if you search for quote phrase, you should be able to find a download.
Hope that helps.
Try smartlock. Works perfect! Just install the cab, then it can be found in: Start/Settings/System
http://forum.xda-developers.com/showthread.php?t=505032
Very simple and very very light application.
Does exactly what it says on the TIN.
The reason I compiled this application is purely to avoid using power button as I don’t want it to worn out. To turn the screen on or off we have to use power button which might stop working if we use the button too much. This application will cut the use of the power button by 50% at least
Rather than using the power button to turn the screen on and off, tap on this application to turn the screen off. Very small application V1.0
I might release another one when I get feedback from the users.
If you want just exe file then copy it in to your phonewindows->start menu-> program folder
Or use cab file which will install it on the above location for you
Enjoy !!!!
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
+1
That makes a lot of sense!
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
hiya,
much appreciate for your comments. do you mean turning screen off as well as locking the screen..? so that when you touch the screen it won't come back on...?
I'm working on to prepare better version i.e. it would be on the home screen so that no clicking on start menu and then this app.
cheers
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
I think he means that you program should not only turn off the devise, but also lock it with the standard WM lock at the same time. That would be good for me, at least.
EgorLev said:
I think he means that you program should not only turn off the devise, but also lock it with the standard WM lock at the same time. That would be good for me, at least.
Click to expand...
Click to collapse
+1
screen off + lock at same time only pressing Powerbutton.
It work perfectly for me so as it is. I changed the left soft-key so that it will start "turn off the light.exe" .When the screen is off S2U2 will lock the screen. So I can turn off and lock the screen with only one click.
To change the soft key do this:
with a registry editor go to HKLM/Software/HTC/manila/ . in HomeLSKPath (left softkey) or HomeRSKPath (right softkey) write the address to "turn off the light.exe". HomeLSKText and HomeRSKText are the text for the softkeys.
That´s it!
update for touch diamond
hi everyone,
massive thanks to all those who provided replies. I have tried on my blackstone (Touch HD) and it does seems to turn off the screen plus all keys as well.
I can confirm that it doesnt lock all the keys i.e. doesnt lock the device on touch diamond model. I'll modify the program and upload the newer version with the feature of locking the keys plus turning off the screen.
once agian special thanks to everyone.
Certainly reading the comments above, people seemed to understand what I was getting at. With the screen off, the buttons on a HD will indeed be non-responsive, however if an event (SMS or similar) woke the screen, the device would be in an unlocked state. What I would be interested in is a program that turned off the screen and invoked the standard WM lock program (gwes.exe?).
Hope that makes sense.
i like this application but i think the icon is really ugly..
Hi,
is there a possibility to do a screen unlock application which can be activated by voice commander? the situation is this...
I used voice commander to launch google maps while my hand is busy when the screen is lock. however, i will need a program which can be initiated by the voice commander to unlock the screen so that i can navigate the maps. Right now i will have to unlock the screen the normal way which i find voice commander redundant since i'll have to use my finger during lunching anyway.
Can you help me on this? Many thanks in advance. =)
Major_Sarcasm said:
Certainly reading the comments above, people seemed to understand what I was getting at. With the screen off, the buttons on a HD will indeed be non-responsive, however if an event (SMS or similar) woke the screen, the device would be in an unlocked state. What I would be interested in is a program that turned off the screen and invoked the standard WM lock program (gwes.exe?).
Hope that makes sense.
Click to expand...
Click to collapse
Here is the app that has the feature which you prefer:
LockDevice => http://forum.xda-developers.com/showthread.php?t=542482
Thanks for the link!
Been using this app so i dont have to fumble with the power button to turn the screen off. Seems this app only turns off the screen and doesnt actualy put the phone in sleep. I would like an app like this that acts as the power button does. So when i put the phone to sleep with the icon, i cant accidently slide the keyboard out a touch and have the phone wake up.
The whole deal has to do with tilt 2's keyboard sensor and magnet cases. With this app, the keyboard sensor still activates when sliding into a magnet flap case, while having slie to wake disabled
carhigh said:
Been using this app so i dont have to fumble with the power button to turn the screen off. Seems this app only turns off the screen and doesnt actualy put the phone in sleep. I would like an app like this that acts as the power button does. So when i put the phone to sleep with the icon, i cant accidently slide the keyboard out a touch and have the phone wake up.
The whole deal has to do with tilt 2's keyboard sensor and magnet cases. With this app, the keyboard sensor still activates when sliding into a magnet flap case, while having slie to wake disabled
Click to expand...
Click to collapse
Hiya,
I'm working on the program so that you can have configuration option to simulate power button to put phone in sleep mode or jus to turn the screen off. This utility was just for people who want to save power whilst listening to the music, etc.
Please keep any ideas/suggestion coming. Much appreciated guys.
Watch the space guys....
That is great inítiative. I use the screen off function actually for the purpose to save power when navigation. screen off when there is a long straíght way to drive.
Put device to sleep mode will cause gps signal lost, which is not so nice.
I can image that there will be a lot of person who wnat to have different adds-on on this small application, it might be a solution to provide command argument.
Thank you.
I will try to see whether this one works for my purpose. Actually in my situation, I even don't want any key be locked as these keys are mapped for navigation.
How about screen toggle thus it is possible to map this application to a key?
awesome, i mapped the exe to a hardware key next to standby. now i can easily save power while wardr listening to music. ^_^
it combines very well with s2u2 locking function too.
big thanks!
tom_hungston said:
Very simple and very very light application.
Does exactly what it says on the TIN.
The reason I compiled this application is purely to avoid using power button as I don’t want it to worn out. To turn the screen on or off we have to use power button which might stop working if we use the button too much. This application will cut the use of the power button by 50% at least
Rather than using the power button to turn the screen on and off, tap on this application to turn the screen off. Very small application V1.0
I might release another one when I get feedback from the users.
If you want just exe file then copy it in to your phonewindows->start menu-> program folder
Or use cab file which will install it on the above location for you
Enjoy !!!!
Click to expand...
Click to collapse
Tom, may be it was to late to find your toggle light off switch, but it was very important for me to find it, thank you man, you solved a terrible issue for me, which is that programs stop updating (eg: twitter) when the device is in standby mode.
I heard that you can release another one, so my feedback is:
it takes about 2 seconds to turn off the light, isn't there any faster??? ))
This application is great. Combined with the S2U2 and HD Tweak i don't even have to use the power button at all. Device locked by S2U2 as soon as i turn off the light, waking up device by pulling out the stylus and rebooting with the help of HD Soft reset. Thanks
P.S. You should really add a decent icon, even though people can change it if they want to.
So, I've purchased a replacement LCD top portion for a sprint TP2, and everything works fine after installing it, except the new power button only works when powering the phone on initially (when it's in a completely offline state), but after that it doesn't work to shut the phone off, or wake up from standby (phone on, screen off). You must open the keyboard to get the screen back on, and either remove the battery or use some program (I've installed a CAB for this already) to shut down from the OS...
Does anybody know why this might be occurring? Another weird thing is that when the phone is not even charging, but has a battery in it (and is not powered on), it shows an orange light that would suggest it is actually charging. I've already contacted the seller of the replacement LCD (which is basically the whole top portion that includes the LCD, power button, end call buttons, etc. (the part that "slides up")...they're willing to send a replacement, but I'm wondering if this is something I can actually easily fix myself?
Thanks in advance!
Ok, if there's no way to fix this, does anybody know of how I might be able to remap another button as the power button?
Any help would be appreciated.
gsvnet said:
Ok, if there's no way to fix this, does anybody know of how I might be able to remap another button as the power button?
Any help would be appreciated.
Click to expand...
Click to collapse
If you are using the NRG ROM, there is a command in the Windows directory called PowerOffWarning.exe. It executes the slide to shutdown program. You can map that to a button using the Settings / Buttons icon.
stevedebi said:
If you are using the NRG ROM, there is a command in the Windows directory called PowerOffWarning.exe. It executes the slide to shutdown program. You can map that to a button using the Settings / Buttons icon.
Click to expand...
Click to collapse
The problem is if the device goes to sleep I can't wake it back up unless I slide open the keyboard.
Is there a way to map another button to wake up the screen again also?
gsvnet said:
The problem is if the device goes to sleep I can't wake it back up unless I slide open the keyboard.
Is there a way to map another button to wake up the screen again also?
Click to expand...
Click to collapse
You can change the lock behavior such that it will answer one of the buttons. It is in the Settings / System / Key Lock icon. However that means that while it is in your pocket or case, the phone may (and probably will) come unlocked and perform some function or another.
Under Settings --> System, I don't have a key lock icon. I'm using the default Sprint ROM. Is it possible that this ROM doesn't have that icon?
gsvnet said:
Under Settings --> System, I don't have a key lock icon. I'm using the default Sprint ROM. Is it possible that this ROM doesn't have that icon?
Click to expand...
Click to collapse
Drat, I'm using NRG. However I recall that the setting is also present elsewhere in WM 6, but I'm sorry, I can't remember where. It may be in with the power application in Settings / System.
I do have WinMo 6.5, but no real option for this unfortunately..
gsvnet said:
The problem is if the device goes to sleep I can't wake it back up unless I slide open the keyboard.
Is there a way to map another button to wake up the screen again also?
Click to expand...
Click to collapse
Taking the stylus out might be another option for switching on the screen, although it's probably more convenient to slide the keyboard open given the choice!
Anyway I did a search and found this:
http://forum.xda-developers.com/showpost.php?p=4904214&postcount=12
Hope that helps.
monomer888 said:
Taking the stylus out might be another option for switching on the screen, although it's probably more convenient to slide the keyboard open given the choice!
Anyway I did a search and found this:
http://forum.xda-developers.com/showpost.php?p=4904214&postcount=12
Hope that helps.
Click to expand...
Click to collapse
Ah, I forgot that removing the stylus turns the device on also. Thanks!
It seems that link is for remapping keys on the qwerty slider, but what about keys on the actual device?
gsvnet said:
Ah, I forgot that removing the stylus turns the device on also. Thanks!
It seems that link is for remapping keys on the qwerty slider, but what about keys on the actual device?
Click to expand...
Click to collapse
I believe it works with any key on the device.
So, what is it ? It's a patched keyboard driver with configurator application for keys setup. Any key (yeah, i mean ANY, including Home and Back keys) can be reassigned to perform desired actions.
Click to expand...
Click to collapse
I don't use any lock screen and I always use the home button to wake my phone up.
Since official JB, the home button not only wakes the phone up but it closes the app I'm in. Example : I'm browsing something on chrome, the screen turns off bc of timeout, I wake the phone using the home button and I see chrome back but immediatly it closes down like if I had pressed the home button again (but I didn't). The same behavior does not happen when a lock screen is enabled.
I tried searching for an answer and tried the solution of editing the .kl files in system/usr/keylayout by adding WAKE_DROPPED or replacing WAKE with WAKE_DROPPED for every occurence of the home key (key 172) without luck. I tried fixing the permissions in CWM and I made sure the permissions are rw-r-r.
Running stock rooted with CWM.
Any other ideas? Thx!
I'm also curious about this. My temporary fix was to unfreeze S Voice in Titanium and then enable the double press of the home button to start S Voice.
I'd rather keep S Voice frozen and still keep the same behaviour of the home button in ICS.
pappcam said:
I'm also curious about this. My temporary fix was to unfreeze S Voice in Titanium and then enable the double press of the home button to start S Voice.
I'd rather keep S Voice frozen and still keep the same behaviour of the home button in ICS.
Click to expand...
Click to collapse
Yes that does work indeed. However, it brings back the lag when pressing the home button. I'm also using home2 shortcut for some shortcuts and it completely breaks them!
The same problem arises also when you long press the home button to get to recent apps, if you have an app open in the background at that moment and you press the home button to get out of the recent app screen, it closes the app!
Is there a way to modify the function of the HOME BUTTON so it doesn't wake the phone?
My Arc S keeps on unlocking inside my pocket and takes a lot of snapshots and drains the battery.
And another thing, what variable to use to open RECENT APPS via a hardware key, for example the camera shutter key.
Thanks in advance.
To prevent screen from turning on in pocket, disable the feature, which turns on screen via home button. Will post instructions later.
Sent from LT18i with custom firmware by myself.
Someguyfromhell said:
To prevent screen from turning on in pocket, disable the feature, which turns on screen via home button. Will post instructions later.
Sent from LT18i with custom firmware by myself.
Click to expand...
Click to collapse
Would really much appreciate it, I've been tormented by this accidental unlock in pocket and drains my battery because of the camera.
Thanks in advance.
Oh, and about the other thing, is it possible? What if I substitute the RECENT APPS for the MENU BUTTON, would the 3dot option appear on some apps?
Someguyfromhell said:
Will post instructions later.
Click to expand...
Click to collapse
Take a file explorer, that can access root folders (ES File Explorer for example), make sure to go into settings and allow access and write to system folders.
Then go to /system/usr/keylayout, open the file pm8058_keypad.kl with ES File Explorer's default Note Editor (long press, Open As, Text), find this line
Code:
key 102 HOME WAKE_DROPPED
and change it to
Code:
key 102 HOME
So just remove the WAKE_DROPPED part.
Wrote it from my head, might have mistakes. Hopefully not.
EDIT: About the recent apps, this is coded somewhere in framework, I can't help you with that. However, the on-screen buttons do not show Menu button, it will only appear on the right side, if there is an app, which makes use of the Menu button and no other possibilities are available (depends on how the app is built).
Thanks a lot for the help sir.
It did the trick and the HOME BUTTON doesn't wake the phone from sleep.
Really much appreciated help.
Thanks again.
I have another question sir, How can I assign the WAKE function in some other button, let's say the VOLUME DOWN?
I tried replacing the WAKE with WAKE_DROPPED but it didn't work, I tried adding it without removing the WAKE and failed.
So is there a way for this?
Thanks again in advance sir.
This particular problem is the reason I use a lock pattern, not because of the security of my phone, but because of the many photos my pocket takes. However, it would be nice if we could wake the phone using the volume rockers, just not to abuse the power button. I also tried to place WAKE_DROPPED on such buttons with no success, help pretty please
Actually I was looking for a mod to use the proximity sensor to know when it is in the pocket, and not allowing the menu button to wake the handset, but this is way better, thanks pal :highfive:
-----------------------------------
Edit:
I found out that the volume rockers actually work well waking the screen, but, you have to select in security>Screen Lock>None
In such case the volume rockers will work to wake the phone (no need to add anything to the VOLUME DOWN line, as it already says WAKE)
Now the question is how to change it to do it while having slide, pattern or password as screen lock
Yeah, that's what I'm after. Using the Volume Rocker to function like the HOME Button in waking the phone.
Will someone help us out in customizing this. The POWER BUTTON is pretty far for my fingers, and the VOLUME DOWN sits just right under my thumb when holding the phone.
Would really much appreciate it if someone help us out.
Maybe they can include something like this on custom roms, giving the users the option to pick which would they prefer.
ajaydsantos said:
Yeah, that's what I'm after. Using the Volume Rocker to function like the HOME Button in waking the phone.
Will someone help us out in customizing this. The POWER BUTTON is pretty far for my fingers, and the VOLUME DOWN sits just right under my thumb when holding the phone.
Would really much appreciate it if someone help us out.
Maybe they can include something like this on custom roms, giving the users the option to pick which would they prefer.
Click to expand...
Click to collapse
It is already on some custom ROMs.
CyanogenMod/FXP based and MIUI ROMs, if I am not mistaken.
But I'm using Zelly Cream 2.5 and it doesn't have that. Hope that it can be ported to this rom.
How do i do it if it's possible? I don't have the know how on such programming/language, will someone help me.
Hi, I have my xperia arc s also with the same problem with you... i actually downloaded root explorer and i can navigate the system data/files but i cannot modify the files mentioned the HOME WAKE_DROPPED... because my unit is not a rooted one...
Please help me to disable the home button by not rooting my phone... Can you make an APK file to disable this function? please please help