Related
Hello there,
I have a rooted t999, unlocked. After going through multiple posts on this forum, I have realized that to enable the call recording feature on your samsung galaxy s3 t999, you got to install a custom ROM.
But, is there any way to update a .apk (or any other method) , compatible with the stock ROM on t999 which might enable the call recording feature back?
Cheers!
Samsung Galaxy S3 T999
SGH-T999
4.0.4
Baseband version: T999UVLEM
(The rooting of the phone would not have not been possible but for the magnificent work of the experts on this forum. Thank you!)
roxio181 said:
Hello there,
I have a rooted t999, unlocked. After going through multiple posts on this forum, I have realized that to enable the call recording feature on your samsung galaxy s3 t999, you got to install a custom ROM.
But, is there any way to update a .apk (or any other method) , compatible with the stock ROM on t999 which might enable the call recording feature back?
Cheers!
Samsung Galaxy S3 T999
SGH-T999
4.0.4
Baseband version: T999UVLEM
(The rooting of the phone would not have not been possible but for the magnificent work of the experts on this forum. Thank you!)
Click to expand...
Click to collapse
Huh? While your in call u dont see the button for it? I have it. Total stock rom. U have to be in call then look at phone u will see it
sarni84 said:
Huh? While your in call u dont see the button for it? I have it. Total stock rom. U have to be in call then look at phone u will see it
Click to expand...
Click to collapse
I highly doubt that. As a matter of fact, I will bet you $100
ingenious247 said:
I highly doubt that. As a matter of fact, I will bet you $100
Click to expand...
Click to collapse
+1
-Sent from my T999 / T-Mobile Galaxy SIII
When I first got my phone I was able to record,so that's stock. I can also record on freesg3 and intrigue. Although I haunt trusted it, the option is available.
Sent from my SG3 using One of many Stock Based ROM's + Zaventh R3
http://supercentral.net
I'm pretty sure that's a mod incorporated by the devs of those roms. As far as you being able to out of the box stock? I don't remember it being there.
Sent from my SGH-T999 using xda app-developers app
thechocowarrior said:
It works for freegs3 which is stock based.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Stock based, but modified to enable/include call recording.
Sent from my SGH-T999 using xda app-developers app
+1 I'm using Wicked's ROM, and I don't have call recording either. Anyone know of a way to get it?
The newer verison has call recording under updates. Im on v1 wicked and i done have recording aswell
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Stock based, but modified to enable/include call recording.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Thank you guys! But all in all, it seems you have custom ROMs on your phones. I had searched the forums and had come across a phone.apk that seemed to be the answer. Now, I am not able to trace it.
Does anyone know about the phone.apk on the stock rom with the recording option?
Cheers!
Samsung Galaxy S3 T999
SGH-T999
4.0.4
Baseband version: T999UVLEM
Build: IMM76D.T999UVALEM
roxio181 said:
Thank you guys! But all in all, it seems you have custom ROMs on your phones. I had searched the forums and had come across a phone.apk that seemed to be the answer. Now, I am not able to trace it.
Does anyone know about the phone.apk on the stock rom with the recording option?
Cheers!
Samsung Galaxy S3 T999
SGH-T999
4.0.4
Baseband version: T999UVLEM
Build: IMM76D.T999UVALEM
Click to expand...
Click to collapse
Here is the one from FreeGS3 r6.
This is NOT my work!
This the stock UVALG1 Dialer app modded by uoY_redruM, dev for the FreeGS3 rom. All thanks and credit goes to him!
(Try out his rom, btw. It is awesome!)
This should work on any stock based rom though.
I'm pretty sure this is where the mod is included. Not sure right now if its dependant on another modded apk as well. Heading to work so will check later if this doesn't work by itself.
DocHoliday77 said:
Here is the one from FreeGS3 r6. If you want a different version just download the zip and extract it from a rom of your choosing.
This should work on any stock based rom though.
I'm pretty sure this is where the mod is included. Not sure right now if uts dependant on another modded apk as well. Heading to work so will check later if this doesn't work by itself.
Click to expand...
Click to collapse
So will this not work on custom ROMs?
Its the samsung dialer so itll only work on stock based roms.
It'll likely be dependant on other parts of the touchwiz framework and is integrated along with contacts and such.
You can try it but I would be extremely surprised if it worked on anything like CM or ASOP.
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Its the samsung dialer so itll only work on stock based roms.
It'll likely be dependant on other parts of the touchwiz framework and is integrated along with contacts and such.
You can try it but I would be extremely surprised if it worked on anything like CM or ASOP.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Does it record on wifi calling?
That, I do not know. I don't use wifi calling so can't test for you either. I think that it would work, but you may just have to give it a test run to find out. If you do, report back as im curious about it myself now that you brought it up!
Sent from my SGH-T999 using xda app-developers app
It's asking me to replace the stock phone apk. I think I have the stock one backed up in tb. Anyone have the new ota phone apk just in case.
Sent from my SGH-T999 using xda app-developers app
Wait, sorry I shoulda been specific I guess! I don't think you can install like a normal app.
Use root explorer and copy the original from /system/app for your backup.
Pay attention to the permissions it has and copy the modded one over the old. Change permissions to what they were before. Reboot into recovery and clear cache and dalvik, then reboot system.
Test.
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Wait, sorry I shoulda been specific I guess! I don't think you can install like a normal app.
Use root explorer and copy the original from /system/app for your backup.
Pay attention to the permissions it has and copy the modded one over the old. Change permissions to what they were before. Reboot into recovery and clear cache and dalvik, then reboot system.
Test.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Thanks a lot Doc!
This is quite interesting! Although I have root explorer, I am terrible with the android stuff and so I am worried about replacing this apk with the existing phone.apk. (its the lack of "recovery" knowledge that scares me to go ahead)
Has anyone of you experts made the dialer work so far through this integration of FreeGS3 phone.apk on the stock ROM?
Cheers!
Another thing that I just figured - In my stock ROM, I do not have a phone.apk (attaching screenshot)
Which app should be backed up? I am guessing that the GS3 apk should be renamed as the stock ROM apk. correct?
http://db.tt/t7Ig4rsG
Edit 2:
guys, just figured out that there is actually an .apk called SecPhone_TMO.apk (kept searching for phone.apk )
so, please ignore the screenshot above!
although, will wait for someone to try replacing the stock ROM .apk with the GS3.
Worked perfect on Wicked's ROM. Have to move the stock phone APK out of the system\app directory and replace it with Doc's. Make sure to put the phone in airplane mode first.
Question - where are the recordings stored?
Thanks for the awesome mod!
They are stored at /sdcard/sounds/
Thank uoy_redrum at the freegs3 thread. Its his work not mine.
.....hope he didn't mind me sharing it like this. Shoulda asked first.
Ill check with him to be sure though.
You guys should try his rom. He's an outstanding dev and very helpful!
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 03:29 PM ---------- Previous post was at 02:32 PM ----------
roxio181 said:
Thanks a lot Doc!
This is quite interesting! Although I have root explorer, I am terrible with the android stuff and so I am worried about replacing this apk with the existing phone.apk. (its the lack of "recovery" knowledge that scares me to go ahead)
Has anyone of you experts made the dialer work so far through this integration of FreeGS3 phone.apk on the stock ROM?
Cheers!
Another thing that I just figured - In my stock ROM, I do not have a phone.apk (attaching screenshot)
Which app should be backed up? I am guessing that the GS3 apk should be renamed as the stock ROM apk. correct?
http://db.tt/t7Ig4rsG
Edit 2:
guys, just figured out that there is actually an .apk called SecPhone_TMO.apk (kept searching for phone.apk )
so, please ignore the screenshot above!
although, will wait for someone to try replacing the stock ROM .apk with the GS3.
Click to expand...
Click to collapse
I wouldn't worry much about it. Especially if you make a copy of the original file as a backup on extSDcard.
Titanium backup works really well too.
Biggest thing to remember is the permissions.
If you can boot into recovery, wiping cache is no big deal at all. Wiping dalvik isn't bad either. When you reboot it'll rebuild dalvik but will use the new app you copied into system.
ALWAYS MAKE A NANDROID BEFORE ANYTHING!!!
That's the most important yhing you can do when messing with anything. It basically creates an exact image/snapshot of your current setup so you can go back to it at anytime.
Nandroid = Peace of Mind!
Sent from my SGH-T999 using xda app-developers app
Until the bootloader is unlocked. Attached is some mods to improve upon Jellybean.
Also, I urge people to bring any modifications(or test yourself) some of the mods in the Nexus 4 section that I can hopefully start transposing onto the LG Optimus Jellybean. I suggest if you're unsure if a mod will work. Ask me first, it's better to ask than brick your phone.
I'll make flashable zips and incorporate into lifeless eventually.
thermald-8064.conf
- Download file (this is NOT flashable)
- Extract the file
- Replace the extracted file with the same file in System/etc (Using Root Explorer or similiar)
- This improves the overheating issue based on the modified stock thermaconfig from ICS
Camera-Mod by _EPIC
- Same exact directions as above
- Excep replace the media_profiles with the media_profiles file attached.
More to come
Seems to be working thanks!
Sent from LG Optimus Prime G
Both work great, as always! :good:
Wifi Teather Root
Hello,
Hope this is the right forum, just recently updated to jelly bean LS970ZVB from this forum. Was able to retain root access; however lost my ability to use Wifi Tether for Root Users. Evidently FreeGee hasn't came up with a way to unlock the bootloader just yet after the update. Is there a way with this update to utilize free WIFI wireless tethering. I've looked around everywhere, and nothing has seemed to work. I have all green check marks on the log within the application. Please help!!!!:confused.
Maybe Sqlite will work with forcing entitlement changes; however , cant find this either.
tomclarke24 said:
Hello,
Hope this is the right forum, just recently updated to jelly bean LS970ZVB from this forum. Was able to retain root access; however lost my ability to use Wifi Tether for Root Users. Evidently FreeGee hasn't came up with a way to unlock the bootloader just yet after the update. Is there a way with this update to utilize free WIFI wireless tethering. I've looked around everywhere, and nothing has seemed to work. I have all green check marks on the log within the application. Please help!!!!:confused.
Maybe Sqlite will work with forcing entitlement changes; however , cant find this either.
Click to expand...
Click to collapse
See the thread that says [READ]?
Sent from my LG-LS970 using xda premium
Re: [READ] thread
_Epic said:
See the thread that says [READ]?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Thanks,for the direction I have placed the same question in the [discussion] thread from your direction. Please clarify if this question can be evaluated there, if not is there a link to where this has been brought up.
Thanks Again,
_Epic said:
See the thread that says [READ]?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
LMAO LOVE IT!!!!! So, about these mods, what exactly do they do? What should I be looking for??
Edit: The better question is HOW do they work? How do they do what they do? Im trying to learn...
Enzopreme said:
LMAO LOVE IT!!!!! So, about these mods, what exactly do they do? What should I be looking for??
Edit: The better question is HOW do they work? How do they do what they do? Im trying to learn...
Click to expand...
Click to collapse
The JB mods thread?
I didn't realize I was in this thread. The camera mod is one I made. It greatly improves camera and video. The thermal one helps with overheating.
Sent from my LG-LS970 using xda premium
tomclarke24 said:
Hello,
Hope this is the right forum, just recently updated to jelly bean LS970ZVB from this forum. Was able to retain root access; however lost my ability to use Wifi Tether for Root Users. Evidently FreeGee hasn't came up with a way to unlock the bootloader just yet after the update. Is there a way with this update to utilize free WIFI wireless tethering. I've looked around everywhere, and nothing has seemed to work. I have all green check marks on the log within the application. Please help!!!!:confused.
Maybe Sqlite will work with forcing entitlement changes; however , cant find this either.
Click to expand...
Click to collapse
Um, wifi tether works fine for me. Not sure why you need an unlocked bootloader to run wifi tether.
_Epic said:
The JB mods thread?
I didn't realize I was in this thread. The camera mod is one I made. It greatly improves camera and video. The thermal one helps with overheating.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
I really liked your camera mod for ics so I wanna give this a shot. I don't know where to put the XML file though. I don't see anything names camera_profiles. Does this replace something or just get dropped in somewhere. Thanks for your work. Sorry for my lack of smarts
bowhunt2005 said:
I really liked your camera mod for ics so I wanna give this a shot. I don't know where to put the XML file though. I don't see anything names camera_profiles. Does this replace something or just get dropped in somewhere. Thanks for your work. Sorry for my lack of smarts
Click to expand...
Click to collapse
Its media_profiles and you replace that file.
Sent from my LG-LS970 using xda premium
AdriVelazquez said:
Its media_profiles and you replace that file.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Drop in system/etc folder then overwrite
Sent from my LG-LS970 using xda premium
Didn't see that in the etc folder the first time. Anyway, I replaced it now. Thanks
I can't seem to DL the thermal zip correctly. It says it dl's but when I open it there is nothing in there. The cam mod zip worked fine.
Sent from my LG-LS970 using xda premium
Adri, the bootloader is unlocked, but the boot image that freegee has is for ics and therefore won't boot. If you just flash the recovery and aboot, you are unlocked, but can't debloat since the security error is fixed with the custom boot image. We haven't figured out how to fix it on jb hence the delay.
Sent from my LG-LS970 using xda app-developers app
This one sounded interesting. Wonder if there's a similar mod that would work for us:
http://forum.xda-developers.com/showthread.php?t=2028289
It changes the synaptic driver out to increase touch screen responsiveness.
Nothing else really comes to mind though.
There's a virtual CD ROM mod I saw floating around, but I would have to find it again.
Sent from my LG-LS970 using xda app-developers app
Shelnutt has updated freegee to properly work and boot for us (the jb boot image and stuff has been taken care of). Now that is out of the way and we are unlocked/rooted zvb, could you make flashable zips for the 2 mods? would love to try them out
thanks
Always look forward to you and Epics stuff.
thanks op!
AC!D Audio Engine V7.0 NOT working on ZVB
(Update) after installing just 2805, it's working.
I have installed AC!D Audio Engine V7.0 and can confirm it is working for me.
install at your own risk.
pre-requisites:
Rooted, unlocked, custom recovery
procedure:
Read the main AC!D Audio Engine V7.0 thread here
Go to the download and installation thread here
Download the 2805 build
Place it on your /sdcard
reboot into recovery
!!!!!!!DO A NANDROID BACKUP!!!!!!!
!!!!!!!DO A NANDROID BACKUP!!!!!!!
!!!!!!!DO A NANDROID BACKUP!!!!!!!
install 2805 build
!!!!!!!CLEAR DALVIK & CACHE!!!!!!!
reboot
test with music
Awesome!
Thanks for the mods, especially the thermal mod. Appreciate the work you did on lifeless especially working with the i-crap sandwich code you and the other devs had to deal with. Looking forward to your jb roms. Keep up the good work and thanks again to you and the rest of the devs! :good:
Has anyone managed to get a hotspot workaround running for 4.3 yet?
I'm liking the ROM on now, but I really need hotspot and it doesn't seem to work on any of the posted stock 4.3 ROMs out of the box.
Sent from my SGH-M919 using Tapatalk
asimons81 said:
Has anyone managed to get a hotspot workaround running for 4.3 yet?
I'm liking the ROM on now, but I really need hotspot and it doesn't seem to work on any of the posted stock 4.3 ROMs out of the box.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I flashed the hotspot mod for 4.2.2 and it works for me.
NiN39Z said:
I flashed the hotspot mod for 4.2.2 and it works for me.
Click to expand...
Click to collapse
Thank you! I'll check around for that then. Much appreciated!
On Jovys rom I posted a link with modified framework and files that will allow tethering if you are using the MK2 modems.
Tether/hotspot only seems to work on 4.2 roms tried 4.3 and 4.4 none works or seems to have no support at least nobody answer to this kind of issue
Sent from my SGH-M919 using XDA Premium 4 mobile app
TheArtiszan said:
On Jovys rom I posted a link with modified framework and files that will allow tethering if you are using the MK2 modems.
Click to expand...
Click to collapse
That is good to know. I will migrate my way over there and look for that. Now all I have to do is get smart on how to modify framework.
TheArtiszan said:
On Jovys rom I posted a link with modified framework and files that will allow tethering if you are using the MK2 modems.
Click to expand...
Click to collapse
The 2 xml files , where they go? I know framework where it is, but the other 2 file dont, can you point me in the right direction thank u
Sent from my SGH-M919 using xda app-developers app
asimons81 said:
Has anyone managed to get a hotspot workaround running for 4.3 yet?
I'm liking the ROM on now, but I really need hotspot and it doesn't seem to work on any of the posted stock 4.3 ROMs out of the box.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I'm using infamous v9 (4.3) and tethering works fine for me.. I'm still on the MDL baseband tho
Sent from my SGH-M919 using XDA Premium 4 mobile app
Nivle said:
The 2 xml files , where they go? I know framework where it is, but the other 2 file dont, can you point me in the right direction thank u
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
They go under /system/csc folder
You should be able to just overwrite the two that are there.
I typically delete thme out and then write the new ones and change permissions.
Reboot and it will read the new files.
Thank u, using without a problem in Jovys23 4.3 stock rom
Sent from my SGH-M919 using xda app-developers app
That's great news.
Feel free to hit the thanks button if it worked for you too.
asimons81 said:
Has anyone managed to get a hotspot workaround running for 4.3 yet?
I'm liking the ROM on now, but I really need hotspot and it doesn't seem to work on any of the posted stock 4.3 ROMs out of the box.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
KitKat carbon got it must use David instead of ART
Sent from my SGH-M919 using XDA Premium 4 mobile app
melqui2004 said:
KitKat carbon got it must use David instead of ART
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not David sorry is Dalvik
Sent from my SGH-M919 using XDA Premium 4 mobile app
where's the link to those files?
does anyone have a link to those framework files for hotspot tethering with the mk2 baseband?
Framework Files
Hello Agelistus,
the files you can find them on this thread http://forum.xda-developers.com/showthread.php?p=47983804&highlight=tether#post47983804
It will be Post #225
I didn't copy the direct URL as I don't own the link of files. Would be glad to post them here if TheArtiszan is ok with that or re-upload them to make them available in more than one spot.
agelistus said:
does anyone have a link to those framework files for hotspot tethering with the mk2 baseband?
Click to expand...
Click to collapse
Much obliged!!
Hey southsidexz, thanks a million!! xda is an entire universe of information and I would have truly burned the midnight oil looking for this to no avail. Gonna try it out now. So far that's my only issue with infamous 9, it seemed that wifi tethering worked natively on 8.0. Again, many many thanks!
Your welcome
Your welcome. Always glad to help people around.
On another note I was dumb enough to rename the framework to old before I replaced it so my Phone got killed..... However thanks to cabloomi and his Recovery Image to .tar.md5 odin flash, I was able to flash CWM latest recovery so it could read my MicroSD card and then flash the zip I created that flashed the framework file. (Thanks to ScatteredHell)
If in case someone else does it... and doesn't want to re-flash the rom or restore old backup.
You can flash Framework via recovery, following this thread instrucitons to get the framework apk into a flashable format for recovery:
http://forum.xda-developers.com/showthread.php?t=1840098
If in case you have a recovery that won't read your external SD card (like I did) you can use this link to flash any recovery via ODIN.
http://forum.xda-developers.com/showthread.php?t=2281287
(Side Note: if you get errors, please see post #23 on the link above, it provides the solution if you get errors)
Note:I am not responsible for damaging or further damaging your phone, I am just providing help/alternate solutions. Your phone is your responsibility
I follow the steps above and got back up running.
agelistus said:
Hey southsidexz, thanks a million!! xda is an entire universe of information and I would have truly burned the midnight oil looking for this to no avail. Gonna try it out now. So far that's my only issue with infamous 9, it seemed that wifi tethering worked natively on 8.0. Again, many many thanks!
Click to expand...
Click to collapse
Just to make this easy I had the same problem on replacing framework, too. Then I searched on some other forums here and found out you can copy or move the framework apk into system folder and fix permissions then move that framework I to the framework folder to replace over the existing apk and just reboot. Just make sure to make a nandroid before doing anything just incase something goes wrong.
Thanks
Thanks Carlos2200,
I would've taken that route but sadly I couldn't get into the system folder. I wasn't able to do a nandroid restore as my SD card got messed up and the backup was gone.
Definitely for anyone, make sure you have a good Nandroid before anything.
I will update that the method I mention above does remove all your accounts only. So you will have to re-add them.
Carlos2200 said:
Just to make this easy I had the same problem on replacing framework, too. Then I searched on some other forums here and found out you can copy or move the framework apk into system folder and fix permissions then move that framework I to the framework folder to replace over the existing apk and just reboot. Just make sure to make a nandroid before doing anything just incase something goes wrong.
Click to expand...
Click to collapse
An alternative....
For those who don't care to bother with the framework files in the event that 3minit is updated to work with 4.3, I came across an app on the play store called "wi-fi tether router" that seems to work, though I haven't a clue why it does. Changing the user agent on the browser renders it successful it seems. Good luck to all!
This nfc fix is designed for 4.3 TW roms.
For older versions, see here: http://forum.xda-developers.com/showthread.php?t=1769083
Install Instructions:
Navigate to /system/csc
Open features.xml
Look for <!-- NFC -->, and replace that section with the following:
Code:
<!-- NFC -->
<CscFeature_NFC_SetSecureEventType>GOOGLE</CscFeature_NFC_SetSecureEventType>
<CscFeature_SmartcardSvc_SetAccessControlType>NONE</CscFeature_SmartcardSvc_SetAccessControlType>
<CscFeature_NFC_DefaultCardModeConfig>ESE</CscFeature_NFC_DefaultCardModeConfig>
<CscFeature_NFC_CardModeRoutingTypeForEse>ROUTE_ON_WHEN_SCREEN_ON</CscFeature_NFC_CardModeRoutingTypeForEse>
[COLOR="Red"]<!-- If you want the NFC icon in the statusbar add this line, otherwise remove it -->[/COLOR]
<CscFeature_NFC_StatusBarIconType>Att</CscFeature_NFC_StatusBarIconType>
Download file below
Flash file in recovery
Install wallet by following the instructions here: http://forum.xda-developers.com/showthread.php?t=2457569
Notes:
If you installed any other nfc fix, you'll need to revert back to your rom's "stock" system. Just flash your rom again.
This will work on either odexed or deodexed roms, as it will remove any associated .odex files.
Devs:
This is a modified Nfc.apk taken from a Sprint build.
Here's a rundown of what's happening:
NfcService looks at /system/etc/nfcee_access.xml and checks for the Google wallet signature.
It also looks at /system/etc/security_nfc_profile.dat for certain files and their sha-1. If it can't match the file with it's sha-1 it marks the system as tampered and will not allow access to the secure element.
This modified Nfc.apk will always return true when it looks at security_nfc_profile.dat.
To-do:
Create a script that will modify features.xml during install.
Download:
SGS3_4.3_TW_nfc_fix.zip
Report: I just installed wallet according to the new post of yours and it all went well. I'm on MBJ bootloader and also on yours att deodexed 4.3 Rom. Here's the screenshot:
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Thanks works great and no pop ups.
Sent from my SGH-T999 using Tapatalk
Stupid noob question, will this work on ota 4.3 that is rooted and has custom recovery? Been wanting wallet tap to pay to work for a while now, Thanks a lot, I searched but could not come up with anything
cybok0 said:
Thanks works great and no pop ups.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
jeremyds45 said:
Stupid noob question, will this work on ota 4.3 that is rooted and has custom recovery? Been wanting wallet tap to pay to work for a while now, Thanks a lot, I searched but could not come up with anything
Click to expand...
Click to collapse
I dont think you would have any problems.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jeremyds45 said:
Stupid noob question, will this work on ota 4.3 that is rooted and has custom recovery? Been wanting wallet tap to pay to work for a while now, Thanks a lot, I searched but could not come up with anything
Click to expand...
Click to collapse
Yes, it will work fine
Sent from my SAMSUNG-SGH-I747
Thanks a lot for this, got it working good. Had to mess with it some, had some previous wallet files that needed to be removed and the like, thanks, I've always wanted to use tap to pay but never wanted to screw with the secure element
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Works great! Been trying everything in the Wallet thread for weeks and never got it working until now!
Sent from my SGH-T999 using XDA Premium 4 mobile app
Also, after I made the changes to the feature.XML file, I made a copy to my sdcard so I can just paste it should I have to reflash my ROM. Might not work if I upgrade or change my ROM, but if I bork and have to reflash it.
Sent from my SGH-T999 using XDA Premium 4 mobile app
does this fix work on att note 2?= running international touchwiz 4.3?
DeathEvil said:
does this fix work on att note 2?= running international touchwiz 4.3?
Click to expand...
Click to collapse
This is the s3 forums, I have a working zip for the note2, but androidfilehost is down right now. So here it is. I'll probably be making some threads soon.
I can finally upgrade to 4.3, just needed a working Wallet. Thanks so much for figuring this out!:laugh:
EDIT: Finally flashed to 4.3. This is what I did. I forgot to disable Wallet, so I did so through the website, wallet.com. After flashing I edited the xml file, then I booted into recovery and flashed the nfc fix. Then I downloaded and pushed the new .apk. When I booted up, the wallet icon did not appear in the notification bar. And after setting up, I have tap and pay not available. What went wrong?
T-Mobile SGS3, Stock rooted T-Mob 4.3, nfc fix from your thread and modded 2.0-R141-V14 .apk
EDIT: I just noticed that auto-upate is on by default in the playstore. I didn't notice any update, but I wonder if that's what did it. Never mind, somehow I got the wrong .apk.
EDIT: Turns out it was the old MD5 modem. I was on wifi the whole time after flashing and didn't notice I did not have a cell signal. Wallet tap and pay is setting up! Thanks!!!
Thank you very much for the work that went into this NFC fix and for the work that has gone into the modified Wallet.apk. I had forgotten to reboot after pushing the app to system/app and the tap to pay feature kept failing. As soon as I rebooted and tried again, it worked. The real test will come when I can actually make it to a store to test. Thanks again.
After I pushed the right .apk and flashed the right modem to get a cell signal, everything set up fine. Used it tonight and had to explain to someone who was so impressed he wants to buy a Nexus or a Sprint GS3.
loserskater said:
This is the s3 forums, I have a working zip for the note2, but androidfilehost is down right now. So here it is. I'll probably be making some threads soon.
Click to expand...
Click to collapse
This worked for my TW 4.3 Note 2
Thanks so much for this thread. I'm happy it give the technical nitty gritty details as well as instructions. Tap to pay is now working on my T999 running rooted stock 4.3.
will this work for a vzw sgs3 with isis as well? i have isis and wallet on my vzw s3 and both are working right now. but not when i upgrade to 4.3 so i've temporarily reverted back to 4.1.2
Does this has to be done on s4 running 4.3 rom?
Sent from my SCH-I545 using Tapatalk
Does this work on 1747m (bell) ? I'd love to be able to use wallet.
cnlson said:
will this work for a vzw sgs3 with isis as well? i have isis and wallet on my vzw s3 and both are working right now. but not when i upgrade to 4.3 so i've temporarily reverted back to 4.1.2
Click to expand...
Click to collapse
It should work, although I haven't tested or heard of anybody that has. If it works for you please let me know.
dseda86 said:
Does this has to be done on s4 running 4.3 rom?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
No, this is in the S3 forums for a reason.
longjohnsteve said:
Does this work on 1747m (bell) ? I'd love to be able to use wallet.
Click to expand...
Click to collapse
Yes, it should work fine.
Sent from my SAMSUNG-SGH-I747
May I present to you....
Stocktimus Series
Why?!
Even if we, by some MIRACLE, (Yeah right LG/Sprint By summer 2014. HA!!) get updated to Kitkat, there seems to be enough interest in another stock based ROM.
This is just a good base to make a Stock ROM the way you want. Just add the zips in Post #2, if you prefer. (WIP)
What this is...
This is just a stock Rom with some Tweaks built into it. If I didn't see an improvement, it wasn't added. It also has apps moved to /data to make it easier to remove what you don't want.
4-20-14 Stocktimus CE -"Custom Edition" added - This one is customized. See Below
You install this at your own risk!!! But really there shouldn't be any problems.
Install
Choose your flavor: Odexed or Deodexed, or CE
In either TWRP/CWM recovery wipe, /system, /data, /cache, and /dalvic. Just DON"T wipe "internal data". That's your SD
Bootup, depending on which ROM, may take up to 4 minutes. The apps from /data are installing.
It never hurts to go to Settings>System Updates, and update profile/prl
Special instuctions for both versions are in their sections.
Change logs:
Code:
v1
[SIZE="3"][COLOR="Blue"]Changes v1 - both O_v1 and D_v1[/COLOR][/SIZE]
[SIZE="3"]Stock Kernel[/SIZE] has init.d support - you can add your own scripts if you want
Boot animation by Partimus Prime
Removed power on/off sounds
Updated SuperSU to ver 1.93
Updated busybox to ver 1.21.1
Thermald modified - this should handle temps better - thanks Adrivalequez
Removed LG Install.apk - This is a snoop service found by LokifishMarz
Added Crwolv camera mod - thanks Lrod0175 and Crwolv
Zipaligned - and Zipaligns on reboot. So no worries about the changes you make
Cleaned up LG's messed up build.prop along with some tweaks
Added:
Viper sound app - Give it a second and select "Cortex A8 for neon" driver [url=http://forum.xda-developers.com/showthread.php?t=2191223]Thread is here[/url]
Xposed installer with Gravitybox module - [url=http://forum.xda-developers.com/showthread.php?t=1574401]Thread is here[/url]
UPDATED Apps moved or in /data:
Gravitybox,Sprint Voice Mail,Flashlight, Estrong File Explorer,Maps,Gmail,Google keyboard,Google Search,Text to speech,Youtube,Wifi tether,Quickboot,Viper Sound,Xposed,Android terminal,Polaris Office,
LG's apps:FileManager,FileShare,LGWorldClock,Marionette,Both Wallpaper apps,Noisefield,TomsDinner
Removed:Connections Optimizer,Sprint Bloat
There's probably other little things I changed. Just can't remember.....
[B]v1.5[/B]
[COLOR="Red"][B]Thermald is updated. This CAN make your phone run hotter if you push it!![/B][/COLOR]
Just flash this. It'll wipe cache and dalvik by itself.
Updated:
build.prop
init.d scripts - mostly readaheads
end of series and this is why? [url]http://forum.xda-developers.com/showpost.php?p=52056778&postcount=80[/url]
[B]CE v1[/B]
Features:
Using Viper Kernel - thanks gearslam
deodexed
De-bloated
5X4 Home Screen - thanks Lrod0175
init.d scripts
build.prop tweaks
apps moved to /data
other stuff I can't remember, but all the goodies from other's in the series
[B]CE v1.5[/B]
LG Browser modified with 25 tabs now
CPU, Memory, readahead scripts in init.d
thermal
build.prop
The Stock versions to make your way are Stocktimus "O" and "D" - versions 1 and 1.5
_____________________________________________________________________________________________________________
Stocktimus Odexed - just like factory-ish and no special instructions
Stocktimus_O_v1 Download________________________________________________________________________________________________________________
Stocktimus Deodexed - Used for Theming or....
Special instructions:
First boot can take up to 4min. Be patient
On first boot, to stop LG Keyboard from FC'ing, you'll need to go into Settings>Language & Input, and enable Google Keyboard
If you want LG Keyboard to work, you'll need to run Xposed framework. Info and thread HERE
When it boots up, turn off Wifi. For some reason it always turns itself on when first booted up.
Then go to Settings>System Updates and update Profile, PRL.
Stocktimus_D_v1 Download_________________________________________________________________________________________________
Stocktimus_v1.5 - this will update BOTH Odexed and Deodexed - Only an update, not a ROM
Stocktimus_v1.5 Download
________________________________________________________________________________
Stocktimus CE - Custom Edition
Instructions:
On first boot go to Settings>Language and input> and enable the keyboard. Otherwise, you'll just have voice KB. Also, enable Xposed, and Viper Sound mod.
Stocktimus_CE Download
___________________________________________________________________________________
Stocktimus CE - 1.5
Just a flashable update. This will wipe /cache, /dalvic and init.d scripts. So if you've added any extra scripts to your init.d, you'll need to add them back.
Before flashing, turn off "Eco-mode"/"Quad core control". This update now has scripts to control the CPU/GPU for better battery and the same performance. I've tamed Viper kernel.
I would recommend NOT using any app that will modify CPU. ie Trickster Mod. I made this because Trickster's settings wouldn't stick
See Change log above
Stocktimus_CE_v1.5 Download
_____________________________________________________________________________________
Thanks in no particular order
PartimusPrime
Shabbypenguin
xboxfanj
Adrivalequez
Lrod0175
Crwolv
LokifishMarz
gearslam
Add-ons - updated 4-22-14
Extras and add-ons - Will update these when I get time - (WIP)
Wifi tether settings:
Device Profile>Generic ICS/JB (wlan0)
Enable Wifi Encryption
That's what I use and it's always worked
And remember, EITHER wifi or Tether per reboot. So if you run one of them, then you need to reboot to use the other.
____________________________________________________________________________
If you want your phone go faster. (Not quite sure how to put that :silly
Go to Settings>Developer Options, about half way down there are 3 settings to adjust timing. Windows,Transition,and Animation. Try those on .5. I just set the Transition one to .5 and I works great for me.
_____________________________________________________________________
Before you do any of the following, make a nandroid backup in recovery!
Kernels:
Stock ZVC - Built in with init.d support. Here
Evolutionmods CodeCraft - this is what Viper kernel is based on - Here
Viper Kernel o/c&u/v - Get it and read it Here
Trickster mod was what I've used with the kernels. But no matter what I tried the settings will eventually change. Using Viper 1.0 or 1.1
_______________________________________________________________________
4X5 Home Sceen- gets rid of the google search bar and gives you more room on the screen - Thanks to Lrod0175 - 4X5 Launcher Works with Deodex.
To work with Odexed. In rooted explorer, go to /system/apps and delete LGHOME3.ODEX. Reboot to recovery and install 5x4 launcher. Done
View attachment 2655429___________________________________________________________________
Flashable Sprint boot animation - no sound. Here
____________________________________________________________________
Flashable Sprint boot and shutdown animation - With sounds. Here
___________________________________________________________________
If you want to change your boot animation, and it's not flashable, you can DL the Sprint with no sound above, open the zip with 7zip and replace the bootani with the one you want. Just make sure you name it bootanimation.zip. You shouldn't have to worry about permissions.
Heres a few if you want. Theres more in our Theme section
PartimusPrime thread. Built into Stocktimus, but in case you want it back. Here
HPTesla threads. Here and Here
octhrope's thread. Here
_Epic's thread. Here
This may not work for the shutdown animation
____________________________________________________________________________________
Stock thermald - http://d-h.st/Faz
____________________________________________________________________________________
Modded LGBrowser - now with 25 tabs. And BTW, #17-25 do not have the little numbers for the tabs. This will work for all Deodexed Stockish ROM's. It SHOULD work for Odexed if you delete LGBrowser.odex
http://d-h.st/mGz
Thanks engine95, I was getting a little worried there that the Optimus G area was getting a bit like a ghost town. I love the ROMs more when it is stock, not completely stock.
Wait, I forgot to say - FIRST!!
Yeah baby!!
You the man @engine95! Thanks for this!
Sent from my Optimus G using xda app-developers app
Thank you sir! Much appreciated man.
USB Debugging is grayed out and can't be turned on in Settings. This is not good. lol Bad flash? (Running DeOdex Version)
Edit: It magically showed up. All is good.
Hate random kernel crashes on Cyanogenmod 11. Hope this doesn't have any.
Could we use Qslide on this ROM if so where can I find it
Jamesredmond82 said:
Could we use Qslide on this ROM if so where can I find it
Click to expand...
Click to collapse
You can try it. It's in the OpTimus thead here. http://forum.xda-developers.com/showthread.php?p=46154045. If it doesn't work you should be able to restore, either your nandroid backup... or the flashable LgSystemUI.apk that's there to. I haven't tried that mod on this ROM yet so let us know.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Thank you kind sir. Would it be possible for you to locate a stock boot up animation? I want this ROM for my mother in law........long story
Jamesredmond82 said:
Thank you kind sir. Would it be possible for you to locate a stock boot up animation? I want this ROM for my mother in law........long story
Click to expand...
Click to collapse
You bet. I'll try to do it tonight or tomorrow. I'm out of town right now.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
You bet. I'll try to do it tonight or tomorrow. I'm out of town right now.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The Qslide worked but it did that the icons to custom icons in the status bar. So I went back to stock.
Jamesredmond82 said:
The Qslide worked but it did that the icons to custom icons in the status bar. So I went back to stock.
Click to expand...
Click to collapse
I forgot about that, and thanks for trying it.
I remember now that it had to be ported for us. I think international got it and we didn't. Most who tried it didn't feel it was worth the trouble to pursue. I'll talk to Leo and see if it's something I can modify to stock icons.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Jamesredmond82 said:
Thank you kind sir. Would it be possible for you to locate a stock boot up animation? I want this ROM for my mother in law........long story
Click to expand...
Click to collapse
I'm running actual stock right now. If you want I can pm you a dropbox of the stock boot ani.zip I know you have to set permissions for it to work correctly. And sorry op I didn't mean to hijack the thread with my longass response.
Edit: there seems to be 3 bootups and 2 shutdowns for stock. https://www.dropbox.com/sh/k8foh8dyh6oazwz/0xpLsBRl9M
That's a link to all 5 of them. As far as permissions go, I'll post a screenshot from my file manager showing them. You need to paste them in the folder I show, make sure you delete the old bootanimation.zip or it won't work.
Sent from my LG-LS970 using xda app-developers app
Sent from my LG-LS970 using xda app-developers app
mkuehl06 said:
I'm running actual stock right now. If you want I can pm you a dropbox of the stock boot ani.zip I know you have to set permissions for it to work correctly. And sorry op I didn't mean to hijack the thread with my longass response.
Edit: there seems to be 3 bootups and 2 shutdowns for stock. https://www.dropbox.com/sh/k8foh8dyh6oazwz/0xpLsBRl9M
That's a link to all 5 of them. As far as permissions go, I'll post a screenshot from my file manager showing them. You need to paste them in the folder I show, make sure you delete the old bootanimation.zip or it won't work.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
It's all good. I made a flashable zip. I just can't upload til later tonight.
The permissions are rw-r-r.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Jamesredmond82 said:
Thank you kind sir. Would it be possible for you to locate a stock boot up animation? I want this ROM for my mother in law........long story
Click to expand...
Click to collapse
Flashable Sprint boot animation with no sound added to OP, Post #2. If you want the sounds, let me know.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
Flashable Sprint boot animation with no sound added to OP, Post #2. If you want the sounds, let me know.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ahh thanks man you've done enough. If you want to just add sound that'll be great if not that's fine too. Much appreciated.
Jamesredmond82 said:
Ahh thanks man you've done enough. If you want to just add sound that'll be great if not that's fine too. Much appreciated.
Click to expand...
Click to collapse
This time I got it right. :victory: Flashable zip with both Sprint boot and shutdown animations. With sound.
The other one I forgot the shutdown animations. Enjoy.
engine95 said:
This time I got it right. :victory: Flashable zip with both Sprint boot and shutdown animations. With sound.
The other one I forgot the shutdown animations. Enjoy.
Click to expand...
Click to collapse
Do you have the stock sounds or do I need to pull them?
Sent from my LG-LS970 using xda app-developers app