I install to much custom roms but my baseband version stays the same GT-S5660XXKTA how can i fix it
Sent from my GT-S5660 using xda app-developers app
Andrea19 said:
I install to much custom roms but my baseband version stays the same GT-S5660XXKTA how can i fix it
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
I don't think you want your baseband version to change. Your baseband in a way is what allows connections to regional mobile operators to get proper signals. If you flash a different baseband, you may not always receive mobile service - the service operator will see that your phone is on a different baseband and may not allow you to connect. I haven't done it myself, but sometimes there may be a baseband update for a specific baseband version.
use Odin to Flash another baseband
Chinese are improving themselves!
Related
Is it possible to only flash a baseband update? Is there any benefit from the newest at&t baseband? How can you tell if it is the most up to date version?
Thanks again guys
Sent from my SAMSUNG-SGH-I747 using xda premium
mastarifla said:
Is it possible to only flash a baseband update? Is there any benefit from the newest at&t baseband? How can you tell if it is the most up to date version?
Thanks again guys
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
You can just flash only modem (It has to be rooted) .
Many people says it's better ( I didn't see much different on my location).
The latest is I747UCLG1 . The previous one is I747UCALEM. Assuming you got AT&T Galaxy S3 :good:
Hi, I have a Galaxy Gio GT-S5660V from Optus Australia. currently running the S5660MUGKG3 baseband. I occasionally have issues with bluetooth refusing to turn on, wifi not turning on and then rebooting my phone, etc. I've downloaded the latest firmware from sammobile "S5660VXXKQK_S5660VOPPKQ2_OPP". Should I flash this baseband to my Gio? I'm running GalaxyICS CM9 RC1 from Maclaw. Any other Aussie Gio users? Which baseband do you recommend? Thanks in advance.
Im not sure what baseband does but i know its according to region and the one you have right now is the one that came preinstalled on my gio, the Canadian one, so it might cause trouble for Australia idk
Sent from my GT-S5660 using xda premium
Yes, I installed the Canadian Bell ROM and baseband in order to unlock my phone. Baseband sits under the ROM and controls the hardware interface. There are a few basebands out there for S5660, S5660M and S5660V, but I can't find any information on which is the latest, changes, or which is better for stock/CM ROMs, etc.
Use the latest wich is specific for your V model, otherwise you will get problems..
Sent from my GT-S5660 using xda premium
I have the Baseband T999UVLG1. My phone is rooted, but i was wondering if i would be able to flash any ROM with a different baseband number? I don't want to have a sexy brick loll.
You should be fine. The baseband is the modem/radio version and any of our radios should work with any of our roms.
So you can flash your rom without fear and likewise you can do the same with any of the radios.
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
You should be fine. The baseband is the modem/radio version and any of our radios should work with any of our roms.
So you can flash your rom without fear and likewise you can do the same with any of the radios.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Alright man, thanks for the help, greatly appreciated
Baseband version is :I9082XXAMC4
Build Number : BALLIBOXER.I9082XXAMD6
Q: will this be a conflict? I have installed Custom Rom "gennxt I9082XXAMD6" thought it will also upgrade my firmware to amd6.
(but it runs smoothly thanks to balli)
Q: can i upgrade my baseband to AMD6 without reverting into stock rom again?
And please teach me how to do it.
thanks in advance
Baseband is not the firmware that is the modem. AMD6 is the firmware version and latest for Southeast Asia for which the baseband is AMC4. Do *#1234# on the dialler and after the supersu you will see fw version.
Sent from my GT-I9082 using xda app-developers app
bongski55 said:
Baseband is not the firmware that is the modem. AMD6 is the firmware version and latest for Southeast Asia for which the baseband is AMC4. Do *#1234# on the dialler and after the supersu you will see fw version.
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
Thank you very much bongski55...
bongski55 said:
Baseband is not the firmware that is the modem. AMD6 is the firmware version and latest for Southeast Asia for which the baseband is AMC4. Do *#1234# on the dialler and after the supersu you will see fw version.
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
That depends upon country. in India baseband version is amd1 for amd6 firmware
Sent from Gt-I9082 on Cm 10.1 ROM
rejocie001 said:
That depends upon country. in India baseband version is amd1 for amd6 firmware
Sent from Gt-I9082 on Cm 10.1 ROM
Click to expand...
Click to collapse
Agreed. That's why I stated clearly Southeast Asia. But since the poster has balliboxer ROM I think he should have AMC4 as baseband. In connection with this, one can always flash thru odin the modem file he wants.
bongski55 said:
Agreed. That's why I stated clearly Southeast Asia. But since the poster has balliboxer ROM I think he should have AMC4 as baseband. In connection with this, one can always flash thru odin the modem file he wants.
Click to expand...
Click to collapse
Amd6 is launched on three different countries... That y baseband is different.. may be me and balli downloaded amd6 of different countries.. from the numbers I can conclude latest baseband is amd1 .. also one more doubt latest installed baseband can degraded to amc4.. because Indian firmware version base band also amd1..
Sent from Gt-I9082 on Cm 10.1 ROM
rejocie001 said:
Amd6 is launched on three different countries... That y baseband is different.. may be me and balli downloaded amd6 of different countries.. from the numbers I can conclude latest baseband is amd1 .. also one more doubt latest installed baseband can degraded to amc4.. because Indian firmware version base band also amd1..
Sent from Gt-I9082 on Cm 10.1 ROM
Click to expand...
Click to collapse
No I don't think it will degrade. Indian baseband or modem happens to be latest number/letter but it is tailored for local providers. To use this baseband in Southeast Asia "might" cause problems there although I think it should not. I myself is using baseband AMC4 but I am in the Middle East without any problem--such as 3G,Wifi,etc associated with the modem .
Hello,
I am trying to flash the official kitkat firmware but I saw on this website:
http://m.ibtimes.co.uk/n7100xxufnd3...ficial-update-available-galaxy-note-2-1446096
Sent from my GT-N7100 using XDA Free mobile app
the update is for baseband N7100XXUFND3. But I have the baseband N7100XXUFND3. Is it a problem if I flash this update and is it possible I get some problems with signal after flashing? Thanks in advance,