Hi
I got some problem from flashing RUU
First,now the phone is RELOCKED(also say security warning),haven't flash a stock recovery
I had downloaded a RUU and flash to the phone
But i got a error 132
What should i do to continue flash the RUU
Sorry for my poor english
More information:
RUU:
RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Radio_5.1204.162.29_release_299865_signed.exe
(I think this RUU is not same to the file name.Anyone can upload a new one to me?)
Phone:
Version-bootloader:1.36
Version-baseband:5.1204.162.29
Version-main:3.14.708.28
cidnum:HTC_622
It needs to match the outcome of :
Fastboot getvar version-main
Then check if its the right one. Relocked bootloader with security warning is oke.
Execute the ruu WITH administrator rights
Mr Hofs said:
It needs to match the outcome of :
Fastboot getvar version-main
Then check if its the right one. Relocked bootloader with security warning is oke.
Execute the ruu WITH administrator rights
Click to expand...
Click to collapse
I had check this before few minutes
C:\fastboot>Fastboot getvar version-main
version-main: 3.14.708.28
finished. total time: 0.084s
It is as same as the file name
I think the file should be corrput:crying:
Oke then redownload the ruu. And execute the ruu WITH the phone in the bootloader, and make sure you right click the ruu and select
Runs as administrator
Mr Hofs said:
Oke then redownload the ruu. And execute the ruu WITH the phone in the bootloader, and make sure you right click the ruu and select
Runs as administrator
Click to expand...
Click to collapse
still have error 132
do you have another version of RUU?
I only see the 707 and the 709 ruu's, no 708 !
Where did you get it from ?
Will a nandroid backup do you any good ?
There is a 3.14.708 backup here
http://forum.xda-developers.com/showthread.php?t=1975140
Mr Hofs said:
I only see the 707 and the 709 ruu's, no 708 !
Where did you get it from ?
Will a nandroid backup do you any good ?
There is a 3.14.708 backup here
http://forum.xda-developers.com/showthread.php?t=1975140
Click to expand...
Click to collapse
Got from another forum
maybe someone change the name and upload to internet-_-
the nandroid backup means someone backup the rom which is come from HTC stock rom?
If yes, how to install a stock recovery
I need to repair the phone so that i need to return to the origin
The ruu must start with the text ENDEVOURU !
The nandroid backup must be copied unpacked to the phone sdcard in the right folder, its described in the OP of the thread.
Copy the boot.img from the nandroid backup and flash it, full wipe in recovery and restore the backup.
Then flash back the stock 3.14 recovery. Also in the OP of the thread and relock the bootloader
Mr Hofs said:
The ruu must start with the text ENDEVOURU !
The nandroid backup must be copied unpacked to the phone sdcard in the right folder, its described in the OP of the thread.
Copy the boot.img from the nandroid backup and flash it, full wipe in recovery and restore the backup.
Then flash back the stock 3.14 recovery. Also in the OP of the thread and relock the bootloader
Click to expand...
Click to collapse
Oh
that is reverse the step from install a custom rom:good:
Still have some question
When i restore the nandroid backup
It can run but it haven't kernel,imei
i can check the imei in cmd by command
what should i do?
flash a stock rom and the imei will appear?
No imei ? Was it there before ? You can try a different rom ofcourse to check.
041987 said:
Oh
that is reverse the step from install a custom rom:good:
Still have some question
When i restore the nandroid backup
It can run but it haven't kernel,imei
i can check the imei in cmd by command
what should i do?
flash a stock rom and the imei will appear?
Click to expand...
Click to collapse
Oh
I haven't flash the boot.img brefore-_-
because i was tyed wrong word-_-
anyway thanks for your help:highfive::good:
So its working now ?
Mr Hofs said:
So its working now ?
Click to expand...
Click to collapse
Ya:fingers-crossed:
Thanks for your help
Good ! :thumbup:
CASE CLOSED !
Related
HTC ONE X
H-BOOT - 0.94.0000
RADIO-1.204.90.13
System Image Ver - 1.28.163.9
Im stuck in a bootloop....i really need to find the correct ruu for my phone ...except i cant find it...is there any other way i could get my phone to boot properly??
I could only find 1.26.163.2 .....Any idea when the 1.28 ver would surface??
Please help need to fix phone urgent!!!
Is the bootloader unlocked, are u running a custom rom ?
What are the results If you do these 2 fastboot commands
Fastboot getvar version-main
and
Fastboot oem readcid
Mr Hofs said:
Is the bootloader unlocked, are u running a custom rom ?
What are the results If you do these 2 fastboot commands
Fastboot getvar version-main
and
Fastboot oem readcid
Click to expand...
Click to collapse
My Bootloader is Unlocked ..Im running ARHD 9.2.7
Fastboot getvar version-main i get 1.28.163.9
CID : VODAP203
Hmm i think you are stuck to a custom rom for a while until there is a matching nandroid or ruu available, i don't see them......but you say the phone is bootlooping ?
What has been changed ?
You can get into the bootloader ? If yes , you can flash the boot.img file from the rom again and you can flash the rom itself again .....
Mr Hofs said:
Hmm i think you are stuck to a custom rom for a while until there is a matching nandroid or ruu available, i don't see them......but you say the phone is bootlooping ?
What has been changed ?
You can get into the bootloader ? If yes , you can flash the boot.img file from the rom again and you can flash the rom itself again .....
Click to expand...
Click to collapse
Thnx ...I was able to flash the custom rom again...and it booted properly...but still how can i go back to stock?
Well basically you need to find a ruu that matches the main version number, you need one exactly like that one starting with 1.28 or 1.29 or 3.14 then you can return to stock.....
Or you need a nandroid backup matching the cid and main version
I checked htcruu.com but there is no ruu for you, only one with a lower version number (but you can't use that one because downgrading is not possible)
Maybe there is one available on the file factory but i don't have an account there
Mr Hofs said:
Well basically you need to find a ruu that matches the main version number, you need one exactly like that one starting with 1.28 or 1.29 or 3.14 then you can return to stock.....
Or you need a nandroid backup matching the cid and main version
I checked htcruu.com but there is no ruu for you, only one with a lower version number (but you can't use that one because downgrading is not possible)
Maybe there is one available on the file factory but i don't have an account there
Click to expand...
Click to collapse
So is there any way to get a nanodroid backup??
sridheepan said:
So is there any way to get a nanodroid backup??
Click to expand...
Click to collapse
Well you should have made one right after you installed the custom recovery, what you can do is make a request in the nandroid backup thread by matt95 in the general section and hope for the best
Mr Hofs said:
Well you should have made one right after you installed the custom recovery, what you can do is make a request in the nandroid backup thread by matt95 in the general section and hope for the best
Click to expand...
Click to collapse
OH..okie..my bad i gues..Thank You Very Much Mr Hofs ...btw is dere any other way i can install jellybean?
Actually yes there is a way, check this thread and read the OP and see if your CID is supported for the firmware update
http://forum.xda-developers.com/showthread.php?t=1957376
Mr Hofs said:
Actually yes there is a way, check this thread and read the OP and see if your CID is supported for the firmware update
http://forum.xda-developers.com/showthread.php?t=1957376
Click to expand...
Click to collapse
Yes its supported...so what do i do???just flash the firmware?
You have to read the instructions how to, i have never done this method so i know as much as you do about it
But yes you have to do some reboot locking and flashing procedures, that's all i know about it
But backup the sdcard before you start doing the updating because locking and Re-unlocking wipes everything !!!
Mr Hofs said:
You have to read the instructions how to, i have never done this method so i know as much as you do about it
But yes you have to do some reboot locking and flashing procedures, that's all i know about it
But backup the sdcard before you start doing the updating because locking and Re-unlocking wipes everything !!!
Click to expand...
Click to collapse
Oh Okie...thnx ...btw can i use this method : http://www.forum-generationmobiles.net/t63139-rom-zip-stock-operateur ?
Lol i don't understand any French
Maybe this tool comes in handy
http://forum.xda-developers.com/showthread.php?t=1924003
:thumbup:
Mr Hofs said:
Lol i don't understand any French
Maybe this tool comes in handy
http://forum.xda-developers.com/showthread.php?t=1924003
:thumbup:
Click to expand...
Click to collapse
Oh...lolzz...okie..Thank You
Good luck mate
I found the files on that french website...was able to revert back to stock for JB update!!!....had to flsh the files maunally though but worked like a charm!! Cheers
That's good news mate :thumbup:
Enjoy !!!
CASE CLOSED
so the title says it all..ive done this before but i forget the command
anybody?
When i soft bricked my phone i run the RUU in fastboot and it worked fine.
you will need to relock your bootloader and have more than 30% battery.
Yes phone in bootloader / fastboot usb menu
Lock the bootloader
Fastboot oem lock
Keep the phone in fastboot usb mode and run the RUU WITH admin rights (right click the ruu to choose it)
so no stock recovery needed
luuranko3 said:
so no stock recovery needed
Click to expand...
Click to collapse
Nope
luuranko3 said:
so no stock recovery needed
Click to expand...
Click to collapse
The rru. Flashes stock boot,recovery and system imgs all that's required is 30% or higher battery and a locked/relocked bootloader.
play tekkit? come join my server for some fun. 193.35.58.2:25575
Sent from venom injected one x
treebill said:
The rru. Flashes stock boot,recovery and system imgs all that's required is 30% or higher battery and a locked/relocked bootloader.
play tekkit? come join my server for some fun. 193.35.58.2:25575
Sent from venom injected one x
Click to expand...
Click to collapse
if you didint know that doesent work on jelly bean..still stuck on viper 3.2.1 the ruu thing doesent move help me please:crying:
Get yourself a ICS nandroid matching your MAIN VERSION number, restore it completely and flash back the matching stock recovery, then update manually to stock JB....again.
Ow and a ruu actually does flash everything back !
Give the main version and cid
Fastboot getvar version-main
Fastboot oem readcid
Mr Hofs said:
Get yourself a ICS nandroid matching your MAIN VERSION number, restore it completely and flash back the matching stock recovery, then update manually to stock JB....again.
Ow and a ruu actually does flash everything back !
Give the main version and cid
Fastboot getvar version-main
Fastboot oem readcid
Click to expand...
Click to collapse
thank you very much now im rocking with stock jellybean:highfive:
Cool !
CASE CLOSED !
i may need to return mine to stock due to wifi issues since moving to JB
my main version is 3.14.401.31
Am I ok to install OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27-2.17.401.2
And then OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R-3.14.401.27_release_302022
thanks in advance
walkerx said:
i may need to return mine to stock due to wifi issues since moving to JB
my main version is 3.14.401.31
Am I ok to install OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27-2.17.401.2
And then OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R-3.14.401.27_release_302022
thanks in advance
Click to expand...
Click to collapse
No you need the full 3.14.401.31ruu instead of the ota. The 3.14.401.27 will not work because that one contains the 1.36 hboot and you are on the 1.39 hboot, downgrade is impossible
Are u on a unlocked bootloader and a custom recovery , then get your cid
Fastboot oem readcid
and download your matching nandroid here
http://forum.xda-developers.com/showthread.php?t=1975140
Do a full wipe, flash the boot.img from the nandroid and restore the nandroid .... Then flash back the stock 3.14 recovery .... and then relock the bootloader
Fastboot oem lock
That's the closest to stock you can get !
Hi,
Yes I am on unlocked bootloader with custom recovery
I've downloaded the file stock-nandroid-3.14.401.31.tar.bz2
I've managed to display the file contents
boot.emmc.win
boot.emmc.win.md5
data.ext3.win
data.ext3.win.md5
system.ext4.win
system.ext4.win.md5
would i be correct in saying i extract the boot.emmc.win from the file and then flash it
restore the nandroid from within twrp
flash boot-3.14.401.img
relock bootloader
would this then be suitable to send off to htc for repair?
Flash the boot file as it is, you don't need to rename it
And yes that's all you can do :thumbup:
Don't forget to flash back the stock 3,14 recovery
Mr Hofs said:
Flash the boot file as it is, you don't need to rename it
And yes that's all you can do :thumbup:
Don't forget to flash back the stock 3,14 recovery
Click to expand...
Click to collapse
flashed boot.emmc.win
extracted the files to clockworkmod\backup but when choose restore on twrp it says updating partitions and doesn't do anything
should the files be copied to twrp folder?
Yes if the backup was done with twrp you can't restore it in the cwm folder. Don't know the exact paths of the twrp backup
Mr Hofs said:
Yes if the backup was done with twrp you can't restore it in the cwm folder. Don't know the exact paths of the twrp backup
Click to expand...
Click to collapse
thanks - i've installed CWM via fastboot and when attempt to restore get a md5 error
trying to get adb working on my machine so perform the md5sum check but always reports no devices - fastboot is fine
What i meant was that you can't restore a twrp backup with cwm at all, maybe there is a workaround but i don't know it, flash the twrp back and check in the backup collection thread if there is info about the twrp folders
Twrp backups are at /sdcard/TWRP/BACKUPS/[device serial]/[backup name]/
Sent from my One X
Good Day,
I am currently trying to go back on Stock and stumpled over this thread.
Unfortunatly I did no backup when I rooted and installed another Rom, but the Author states that I may use another one's Backup.
My CID is O2___102 and some kind User named treebill uploaded his O2___102 backup. So far so clear.
But
Code:
fastboot getvar version-main
tells me my HOX is currently using 2.17.207.2 while the backup of treebill is 2.17.206.2.
In fear of bricking my device, I am not sure if I can use this backup with a lower Versionnumber. I did a quick search but couldn't find an answer. My HBOOT is 1.12.000 if that is somehow an information of interest.
And on another Point: If I may use this backup and successfully restore stock, will my bootloader be locked again?
Great Thanks in Advance to the noble Responders
Are you sure you got yourself the right versions ?
Also do
Fastboot oem readcid
Sure you wrote down the right version number here ?
Mr Hofs said:
Fastboot oem readcid
Click to expand...
Click to collapse
This command delivers me <bootloader> DEBUG: cid: 02___102 which concurs with the cid of treebill.
Code:
fastboot getvar version-main
tells me version-main: 2.17.207.2
And this h ttp://i.imagebanana.com/img/ww1dkc2n/cid.PNG is the backup I want to use (remove space in h ttp). It seems to be of an earlier version, so I don't know if I may use it.
That's kinda strange, I have seen the 207 software but it had CID 02__001
Ow and you can try the backup that is no problem, you will not brick your device ! The only thing is that the phone might not update !
And in this process you do not need to relock the bootloader !
You have 3 options.
1: try the 206 nandroid backup, flash back the stock 2.17 recovery and try to update. If it doesn't update ....no problem , go back to the latest backup
2: try to scoop up a 207 nandroid backup or RUU. But i didn't see no ruu with a 2.17.207 number
3: do a standalone firmware flash to lift your hboot to a JB one and flash a new JB rom of your choice
First of all: Thank you for your answer. I was busy studying so forgive me for posting this late.
Mr Hofs said:
1: try the 206 nandroid backup, flash back the stock 2.17 recovery and try to update. If it doesn't update ....no problem , go back to the latest backup
Click to expand...
Click to collapse
I tried this, unfortunatly it didn't work out.
Mr Hofs said:
2: try to scoop up a 207 nandroid backup or RUU. But i didn't see no ruu with a 2.17.207 number
3: do a standalone firmware flash to lift your hboot to a JB one and flash a new JB rom of your choice
Click to expand...
Click to collapse
If I understood right, I need the correct Ruu in both cases. I found this OTA_ENDEAVOR_U_JB_45_S_O2_DE_3.14.207.27-2.17.207.2_release_2996435hle0dx8i1s01kza.zip File size: 350.92 Mb through google on roomyshare. The 02 DE looks to be the 02___102 cid, even through it is not really stated there.
I am a little unsure if this is the right thing. The 3.14.207.27 irritates me.
Its a ota file. Its of no use because its the official ota but it can't be flashed like a full ruu
Mr Hofs said:
Its a ota file. Its of no use because its the official ota but it can't be flashed like a full ruu
Click to expand...
Click to collapse
And for a very brief moment, i was happy. Nah, nevertheless thanks.
Hey all
I'm a beginner my question is my cid is 02___001 I'm running android 4.0.3 what custom Rom can I install to have the latest jelly bean 4.1
Yes I believe you can You have an O2_UK version on the HOX
Check this thread: http://forum.xda-developers.com/showthread.php?t=2031359
Cheers!
Thanks a lot
Sent from my HTC One X using xda premium
You can't run JB roms now ! First you need to update the bootloader. Are you on full stock then first ota all the way up to jellybean ! Otherwise return to stock first and update
Mr Hofs.....always in for a party !
Mr Hofs said:
You can't run JB roms now ! First you need to update the bootloader. Are you on full stock then first ota all the way up to jellybean ! Otherwise return to stock first and update
Mr Hofs.....always in for a party !
Click to expand...
Click to collapse
im running revolution hd rom not the stock rom
koubeissy.ibrahim said:
im running revolution hd rom not the stock rom
Click to expand...
Click to collapse
Then you have to go back to full stock rom, or run a ruu
Mr Hofs said:
Then you have to go back to full stock rom, or run a ruu
Click to expand...
Click to collapse
Im wanna get back to full stock rom using a nandroid backup i found:
Nandroid Backup 3.14.206.27 CID O2__001
Nandroid Backup 1.29.206.11 CID O2__001
which one do i have to use im currently running HBOOT 0.43
thanks a lot
At least the 1.29. The 3.14 is not going to work because of your low hboot. If you want to be certain you need to do a fastboot command
Fastboot getvar version-main
When the number matches your are good to go
Mr Hofs said:
At least the 1.29. The 3.14 is not going to work because of your low hboot. If you want to be certain you need to do a fastboot command
Fastboot getvar version-main
When the number matches your are good to go
Click to expand...
Click to collapse
i installed the 1.29 but now the phone is stuck in a bootloop what can i do please
Did you flash the boot.img from the nandroid backup ?
Made a full wipe before restoring the nandroid ?
Mr Hofs said:
Did you flash the boot.img from the nandroid backup ?
Made a full wipe before restoring the nandroid ?
Click to expand...
Click to collapse
First i cant access clockworkmod from the recovery menu, when i try to it stops loading the clockworkmod and reboots the phone.
i tried to flash the boot.img from the nandroid backup with no luck
is there anyway to restore the full nandroid backup from a zip file
thanks
Did you do this fastboot command ?
Fastboot getvar version-main
Post the outcome !
Mr Hofs said:
Did you do this fastboot command ?
Fastboot getvar version-main
Post the outcome !
Click to expand...
Click to collapse
here's the outcome
n-main
version-main: 1.26.206.2
finished. total time: 0.012s
Ah that's why a 1.29 does not work
I get you a ruu ....hold on will update this post shortly
Download this file
http://bugsylawson.com/index.php/fi...062-radio-112049013-release-251230-signedexe/
Put the phone in the bootloader and relock it
Fastboot oem lock
Then keep the phone in the bootloader and execute the ruu on the pc with a right click and select run as administrator
Should bring it back to full stock and start updating after that. If the phone does not detect any OTA update ..... Install this ruu then
http://bugsylawson.com/index.php/fi...62-radio-2120413520-release-275038-signedexe/
The same way as you did except locking the bootloader because it is already locked !
Mr Hofs said:
Ah that's why a 1.29 does not work
I get you a ruu ....hold on will update this post shortly
Download this file
http://bugsylawson.com/index.php/fi...062-radio-112049013-release-251230-signedexe/
Put the phone in the bootloader and relock it
Fastboot oem lock
Then keep the phone in the bootloader and execute the ruu on the pc with a right click and select run as administrator
Should bring it back to full stock and start updating after that
Click to expand...
Click to collapse
sorry for being such a pain in the as :silly: but just for making sure this is the right RUU to use i dont wanna break my phone
my hboot is 0.43.0000
S-On
CID: O2__001
do you need any more information to advise me
really thanks a lottttt
:good::good::good::good::good:
Nope this will all end very well....and your not a pain in the A ! You are just learning now
Hello,
I am currently trying to reset my HTC One X from Cyanogenmod 10.1 to the Stock ROM. I have HBOOT 1.39.0000, the Bootloader is relocked and its unbranded with a cid 102.
I am using Windows 8.
I already tried the following RUU versions:
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
and
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed
But i always get the Error 140, which tells me that something is wrong with my bootloader version.
What am i doing wrong?
Thank you.
Whats the outcome of
Fastboot getvar verion-main
Does it match the ruu number ? And did you relock the bootloader before running the ruu with admin rights ?
it says: version main: 3.18.401.1
And yes i relocked the bootloader before starting the RUU
I have the same issue:
cid: HTC__032
version-main : 3.20.401.3
cannot go back to stock due to version beeing to high. Is there any other way?
sunilson said:
it says: version main: 3.18.401.1
And yes i relocked the bootloader before starting the RUU
Click to expand...
Click to collapse
Go here : http://forum.xda-developers.com/showthread.php?t=1975140
Download the nandroid backup which matches your version-main and cid! and then restore it
---------- Post added at 06:39 PM ---------- Previous post was at 06:37 PM ----------
craoul said:
I have the same issue:
cid: HTC__032
version-main : 3.20.401.3
cannot go back to stock due to version beeing to high. Is there any other way?
Click to expand...
Click to collapse
Try restoring the 3.20.401.1 backup for you CID?! Don't know if it will work or not!
vin4yak said:
Try restoring the 3.20.401.1 backup for you CID?! Don't know if it will work or not!
Click to expand...
Click to collapse
Yeah that works flash back the 3.14 stock recovery and you are also able to update again to 401.3
Mr Hofs said:
Yeah that works flash back the 3.14 stock recovery and you are also able to update again to 401.3
Click to expand...
Click to collapse
I restored 3.20.401.3 but I do not know what is the stock recovery for this firmware
craoul said:
I restored 3.20.401.3 but I do not know what is the stock recovery for this firmware
Click to expand...
Click to collapse
Here you go!
https://www.dropbox.com/s/ms7vd18vb9watr8/stock recovery 3.14.img
vin4yak said:
Here you go!
https://www.dropbox.com/s/ms7vd18vb9watr8/stock recovery 3.14.img
Click to expand...
Click to collapse
Nothing Here
The file you're looking for has been deleted or moved.
http://db.tt/pO3jumMa
Probably my old links. I had to re-organize my dropbox folders and names
Mr Hofs said:
http://db.tt/pO3jumMa
Probably my old links. I had to re-organize my dropbox folders and names
Click to expand...
Click to collapse
Yeah!! I had bookmarked it :good:
vin4yak said:
Here you go!
https://www.dropbox.com/s/ms7vd18vb9watr8/stock recovery 3.14.img
Click to expand...
Click to collapse
OK, flashed recovery, but from fastboot if I chose recovery the phone just goes back to fast boot. How do I know that the recovery is flashed correctly ?
When the command window says OKEY
Ok so I now restored the Stock ROM with the Nandroid Backup and everything seems to work, except the touchscreen XD
The phone doesnt respond to my finger.
Did i do something wrong?
sunilson said:
Ok so I now restored the Stock ROM with the Nandroid Backup and everything seems to work, except the touchscreen XD
The phone doesnt respond to my finger.
Did i do something wrong?
Click to expand...
Click to collapse
did you flash also boot.img and recovery.img?
steps are:
restore with nandroid
flash boot.img
flash recovery.img
lock or do not lock bootloader (this one is your choice)
sunilson said:
Ok so I now restored the Stock ROM with the Nandroid Backup and everything seems to work, except the touchscreen XD
The phone doesnt respond to my finger.
Did i do something wrong?
Click to expand...
Click to collapse
Did you wipe everything?
1. fastboot flash boot boot.img (The one from nandroid backup)
2. fastboot erase cache
3. Go to recovery and flash this : http://d-h.st/kG0
4. Now restore nandroid backup
5. Wipe cache/dalvc (Just in case)
6. Reboot.
for updates you need also the stock recovery
Is it possible to revert to 3.20.401.1 from 4.18.401.2 by using 3.20.401 nandroid backup?
If yes, what else to do with boot.img?
ntquartex said:
Is it possible to revert to 3.20.401.1 from 4.18.401.2 by using 3.20.401 nandroid backup?
If yes, what else to do with boot.img?
Click to expand...
Click to collapse
You have to flash boot.img from your nandroid backup after or before , restore the nandroid backup file.