{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
General Info:
CyanogenMod is a free and open source Android distribution that currently supports the Nexus 10.
Detailed information can be found at our wiki
This thread is intended for development and issue discussion. Please use this existing thread courtesy of shimp208 in the general section for general discussions.
Nexus 10 Specific Info:
Nexus 10 specific install instructions, links to source, and other information can be found on the Nexus 10 CyanogenMod wiki page here.
Who to follow:
To keep up with the latest in development checkout:
CyanogenMod Google+ Community
CyanogenMod Google+
You can follow me on twitter @Dalingrin
What to Install:
CyanogenMod has several release types: Stable, M series, and Nightlies.
End users are encouraged to installed either the Stable releases or the M series.
Stable releases are not regularly released and are on a "when it is done" basis. The M series are released roughly monthly and are generally stable enough for a daily driver, particularly for Nexus devices.
Nightly builds are part of our automated build system intended to help developers test their code. At any given time there *will* be bugs in the nightly builds. New code is first submitted for peer review at the CyanogenMod gerrit. Because CyanogenMod supports a wide variety of devices, only so many issues can be efficiently caught in the review stage. Once the code is accepted it is then tested on a wider scale in the nightly builds. Since the nightly builds contain such new code, they are not intended for end users.
The official builds for all release types can be found at http://get.cm with the Nexus 10 specific builds found here. Note the type disignations on get.cm are "Snapshot" for M series and "Nightly" for...well, nightlies.
Reporting Bugs:
Bugs for M series releases should be reported using the CyanogenMod Jira Tracker
Bugs only found in the nightly builds should not be reported in Jira and can be discussed here. In particular, it would be best to keep mostly bug discussion specific to the Nexus 10 in this thread.
Yesss! Thanks for opening up this dev thread
I logged this in jira a few days ago now, but not heard anything, just wondering if i seem to be the only one with the issue?
https://jira.cyanogenmod.org/browse/CYAN-502
Sent from my Nexus 10 using Tapatalk HD
How does this run compared to other ROMs? Is anyone running this as a daily driver?
Sent from my Nexus 10 using xda app-developers app
Neonfire said:
How does this run compared to other ROMs? Is anyone running this as a daily driver?
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
ROM runs superb, no major issues whatsoever even on the nightlies! Has been like that from basically the start
However this thread is primarily for dev talk and bugfixes, discussion can take place in the discussion thread on general
Sent from my Nexus 4 using xda premium
Hereisphilly said:
Yesss! Thanks for opening up this dev thread
I logged this in jira a few days ago now, but not heard anything, just wondering if i seem to be the only one with the issue?
https://jira.cyanogenmod.org/browse/CYAN-502
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
It's supposed to be like that.
mmhama2 said:
It's supposed to be like that.
Click to expand...
Click to collapse
I don't think that's correct, when the very first nightly came out, and for a while after, just before M1 came out, the spacing was exactly as per stock (evenly spaced out).
Since then it had been compressed and I remember it being mentioned as a bug briefly in the discussion thread
Sent from my Nexus 10 using Tapatalk HD
On the last few nightlies Bluetooth doesn't turn on
Sent from my Nexus 10 using XDA Premium HD app
Hereisphilly said:
I don't think that's correct, when the very first nightly came out, and for a while after, just before M1 came out, the spacing was exactly as per stock (evenly spaced out).
Since then it had been compressed and I remember it being mentioned as a bug briefly in the discussion thread
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
You're right, the padding is not correct in the dock/hotseat for the Nexus 10. Thanks for the bug report. Its exactly what's needed.
I can't take a look at this for at least another week because I'm going to be out of the country. Hopefully with your bug report the issue will get more visibility and nebkat, the primary Trebuchet developer, will take a look at it.
I had posted about the dock issue in the CM10.1 thread around the time M2 came out, but got no replies. So, I assumed it meant to be that way.. Glad it was brought here and hopefully it leads to a fix.
Sent from my Nexus 10 using Tapatalk HD
Hey guys,
my cursor/text selection does strange things while typing, at least on stock browser. I'm using the stock keyboard. Steps to reproduce (stock browser):
- type into a multirow text field (around 2 rows, 6 words)
- select a word with longpress somewhere in the text
- type in a letter or press backspace
Result: Random text gets overwritten/deleted.
It's realy annoying, cuz its unpossible to edit text anymore with selecting. U guys can reproduce it too?
j0hnnie said:
Hey guys,
my cursor/text selection does strange things while typing, at least on stock browser. I'm using the stock keyboard. Steps to reproduce (stock browser):
- type into a multirow text field (around 2 rows, 6 words)
- select a word with longpress somewhere in the text
- type in a letter or press backspace
Result: Random text gets overwritten/deleted.
It's realy annoying, cuz its unpossible to edit text anymore with selecting. U guys can reproduce it too?
Click to expand...
Click to collapse
I've seen this issue on all roms running chrome on the Google search bar. If you hit back it will randomly delete stuff and just all sorts of jacked up. I think its more of a Google issue. Have you tried switching on or off the volume button for moving the cursor, it may have an impact either way
Sent from my Nexus 10 using Tapatalk HD
altimax98 said:
I've seen this issue on all roms running chrome on the Google search bar. If you hit back it will randomly delete stuff and just all sorts of jacked up. I think its more of a Google issue. Have you tried switching on or off the volume button for moving the cursor, it may have an impact either way
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Hi. Yeah i switched it off but still the same issue.But thanks anyway. And for u is it chrome only, or can u also reproduce the error on stock browser like described above.
Hi, im not sure if this is the place to ask this, so if it isnt im sorry and would be grateful for someone to point me to the right place, but im having a big issue with flashing cm 10.1 to my n10 (and n7). I flash the latest update and the latest gapps, but when i log into my google account all i get is errors from the play store from it trying to reinstall all of my apps. It gives me the 920 error and i cant even go into each one and install them manually. ive flashed it and gapps multiple times and im going crazy because it just keeps happening. Thanks for any help.
blipp said:
Hi, im not sure if this is the place to ask this, so if it isnt im sorry and would be grateful for someone to point me to the right place, but im having a big issue with flashing cm 10.1 to my n10 (and n7). I flash the latest update and the latest gapps, but when i log into my google account all i get is errors from the play store from it trying to reinstall all of my apps. It gives me the 920 error and i cant even go into each one and install them manually. ive flashed it and gapps multiple times and im going crazy because it just keeps happening. Thanks for any help.
Click to expand...
Click to collapse
Hi. The right order is:
(- wipe/format system)
- flash CM zip
- flash gapps (u should use 20130301)
(- flash custom kernel)
- wipe data (factory reset), wipe cache and dalvik cache
j0hnnie said:
Hi. The right order is:
(- wipe/format system)
- flash CM zip
- flash gapps (u should use 20130301)
(- flash custom kernel)
- wipe data (factory reset), wipe cache and dalvik cache
Click to expand...
Click to collapse
Thanks. I tried it one more time and decided to skip the auto restore option and install everything manually. Everything's installing fine now, but its really tedious. But tedious is better than not working at all.
Sent from my Nexus 10 using Tapatalk HD
j0hnnie said:
Hi. The right order is:
(- wipe/format system)
- flash CM zip
- flash gapps (u should use 20130301)
(- flash custom kernel)
- wipe data (factory reset), wipe cache and dalvik cache
Click to expand...
Click to collapse
Isn't that redundant? All you need to do is:
Wipe System
Wipe Data
Wipe Dalvik
Wipe Cache
Flash ROM
Flash Gapps
Flash Kernel
-Reboot
brees75 said:
Isn't that redundant? All you need to do is:
Wipe System
Wipe Data
Wipe Dalvik
Wipe Cache
Flash ROM
Flash Gapps
Flash Kernel
-Reboot
Click to expand...
Click to collapse
FYI - It's not necessary to do individual wipes. Factory reset includes a data and cache wipe (incl dalvik). Flashing a ROM implicitly wipes system.
Sent from my Nexus 7 using Tapatalk 2
sam3000 said:
FYI - It's not necessary to do individual wipes. Factory reset includes a data and cache wipe (incl dalvik). Flashing a ROM implicitly wipes system.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Correct, but sometimes its good to wipe a little extra and ensure no clingon's
Sent from my Nexus 10 using Tapatalk HD
this may be a dumb question - but I'm unable to get my instant upload photos to show up in my gallery. This is useful to me because I use it to sync photos across multiple devices. I read something about this being a result of the CM camera enhancements not working w/ sync. Any clarification on this?
Sent from my Nexus 10 using xda app-developers app
I'm on the march 31st nightly and I've been trying to flash to the April 1st one but it's not working. I tried it with the built in updater and cyandelta and it doesn't update. In recovery it says that the file update was successful but then when it boots it's still on the original one. I'm waiting for the next one to see if still happens but has anyone else had this problem? It worked on my n7.
Sent from my Nexus 10 using Tapatalk HD
Related
Sorry for the long delay. I inally have everything sorted out and the temperatures finally cooled down enough that the random brownouts have stopped. Lots of new things in this release. I suck with changelogs and the way I built this rom makes it hard to know everything that's changed. I rescripted Maniac103's Defy repo for the Bravo and am now using that as my base. Before I was updating a cloned Quarx CM7 repo with cherrypicks from Maniac's and FuZZ's Defy repos..
Some new features include
Bootmenu Pin Protection
Wifi Calling (untested)
SmartassV2 replaces Smartass, conigure it with smartass's settings in the bootmenu
Voice Commands
More Tablet Mode Features, you'll see them
New FM Radio
Nuance Bluetooth Voice Dialer
My Github
https://github.com/skeevy420
Install Instructions When Coming From Other Roms
-Root, Enable Non Market Apps, Install Defy 2nd-init (Search Forum For More Help)
-Reboot into Recovery
-Select Wipe Data\Factory Reset
-Select Install Zip from SDCard
-Find and Select the Rom you just downloaded
-Flash It
-Select Install Zip from SDCard
-Find and Select Gingerbread Gapps
-Flash It
-Reboot:victory:
Updating From A Previous Kang Instructions
-Reboot into Recovery
-Select Install Zip from SDCard
-Find and Select the Rom you just downloaded
-Flash It
-Reboot:victory:
Wiping Cache and Wiping Dalvic Cache isn't necessary since I added those commands to the installer script. Adding those commands makes updating simpler, less prone to errors, and less presses of the volume and power buttons.
I need to look in touch recovery and touch bootmenu.
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: The Launcher in the screenshot is Holo Launcher Plus. There is a free version available in the market that works well. The Live Wallpaper is Hydra Galaxy (modified to save battery) from Galaxy Pack. Try Ice Galaxy for a free alternative from the same dev.
Download CM7 Here
NOTES & BUGS:
I've sometimes had an issue where my pc won't connect to adb since the phone won't give permission. It usually only occurs after the first 2 or 3 boots then magically fixes itself. I've also had usb data tethering fix the adb problem. If you don't use adb on your pc, then this isn't even an issue for you.
Get Previous Versions Here
The attachment is for josuearisty -- no one else needs to download it or use it -- this was just a quick place to upload it for him
CM7 Mods
Just a couple of mods I use with CM7.
Bravia Engine - Sony Image PP engine for sharper images.
Beats Audio - Sony Audio engine with improved bass and treble -- can harm inferior and crappy headphones and speakers (Trust Me).
All the zips are flashable in recovery.
Credits for the zips go to their original makers, which I can't remember since I downloaded them a few months ago and can't find the threads I found them in (somewhere here at xda).
Skeevy your rom is lightning fast! Thanks so much! Thanks for beats audio and bravia zips too!
Sent from my MB520 using xda
Hey skeevy420 can you give me a link to the older build for some reason no matter which baseband I try on the July 13th build I can't get 3G/H on my network
from my MB520 using xda app-developers app
EDIT: ah nvm ill just be using the jelly bean rom in the mean while
skeevy420 said:
Also, does anybody here use the stock filemanager? I know I don't; I can remove it and replace it with Apoonet's Miui File Explorer so we'd have a free, root, and feature filled file explorer by default.
Click to expand...
Click to collapse
I use ES file explorer, but basically I use any file manager with root access.
I've been using this one for a few days and haven't found any bugs. Pretty sure this is the most stable rom I've had on my phone.
Another thinh I've noticed is I can't tell if the bravia engine is working. I know it is supposed to produce clearer images, but I don't notice a difference. Oh well, this phone doesn't have a fantastical camera anyway.
Sent from my MB520 using xda app-developers app
ccdsatt said:
Hey skeevy420 can you give me a link to the older build for some reason no matter which baseband I try on the July 13th build I can't get 3G/H on my network
from my MB520 using xda app-developers app
EDIT: ah nvm ill just be using the jelly bean rom in the mean while
Click to expand...
Click to collapse
http://www.mediafire.com/?mand0d3vvpnozfb
Dr. Orange said:
I use ES file explorer, but basically I use any file manager with root access.
I've been using this one for a few days and haven't found any bugs. Pretty sure this is the most stable rom I've had on my phone.
Another thinh I've noticed is I can't tell if the bravia engine is working. I know it is supposed to produce clearer images, but I don't notice a difference. Oh well, this phone doesn't have a fantastical camera anyway.
Sent from my MB520 using xda app-developers app
Click to expand...
Click to collapse
I was just thinking of swapping it out with Apoonet's Miui File Explorer -- Free, Root, Advanced Features, Auto-Updates itself, No Crappy Permissions.
Glad to here it works great for more than myself.
The only way I could tell if Bravia was working was I took picture of my dog with the Bravo's camera and dl'd a HD image, started at each of them for minutes on end each, flashed bravia, stared again. They did improve, but not by much and I doubt anyone would notice the difference unless you did the stare test like I did.
thanks skeevy
skeevy420 said:
http://www.mediafire.com/?mand0d3vvpnozfb
I was just thinking of swapping it out with Apoonet's Miui File Explorer -- Free, Root, Advanced Features, Auto-Updates itself, No Crappy Permissions.
Glad to here it works great for more than myself.
The only way I could tell if Bravia was working was I took picture of my dog with the Bravo's camera and dl'd a HD image, started at each of them for minutes on end each, flashed bravia, stared again. They did improve, but not by much and I doubt anyone would notice the difference unless you did the stare test like I did.
Click to expand...
Click to collapse
I have no preference in explorer so whatever you put that is not stock I'll gladly use. Although I can't speak for everyone else.
I flashed the latest cm10 just to try it out, but it's still early and I noticed quite a few bugs. I'll probably be sticking with your kang(s) for a while.
Sent from my MB520 using xda app-developers app
Help please
Hi. Im a newbie at all this installing rom stuff. I am trying to install this rom, but omited to download and place the gingerbread gaaps on my sd card before the process...
so now I am stuck in this step
-Find and Select Gingerbread Gapps
-Flash It
-Reboot
Should I turn it off and put the gaaps in there, and then restart it? Please help!
Just as a fallow up the way I solved this issue thanks to other forum members help was: turn off my phone, and install the gaaps to the sd card, to unzip them later.
PC Crashed
Not gonna be a CM7 this week, or anything else for that matter. My pc went down Thursday and I finally had the time today to get it back up and running. Still have to finish configuring everything how I like it, install all the build requirements, sync all my repos again (takes a while), and much more. My biggest problem is I might lose a lot of my Android stuff on my old encrypted home folder. Need to look into accessing an encrypted home folder when you don't have the password anymore. Like a dumbass, I stored it in my Documents folder....instead of anywhere on one of my other 3 hard drives.
I'll look into the baseband issue. I think I just need to add in the missing folders and files under /etc/motorola that the new baseband switcher uses.
Maniac had quite a few CM7 updates last week, and that's always good.
Hopefully I'll be back in business by Monday.
//If you're wanting to try out Linux, I gotta recommend Mint 13 Xfce to ya. The install is painless and the system's ran good and stable so far. One of my best Linux experiences.
skeevy420 said:
Not gonna be a CM7 this week, or anything else for that matter. My pc went down Thursday and I finally had the time today to get it back up and running. Still have to finish configuring everything how I like it, install all the build requirements, sync all my repos again (takes a while), and much more. My biggest problem is I might lose a lot of my Android stuff on my old encrypted home folder. Need to look into accessing an encrypted home folder when you don't have the password anymore. Like a dumbass, I stored it in my Documents folder....instead of anywhere on one of my other 3 hard drives.
I'll look into the baseband issue. I think I just need to add in the missing folders and files under /etc/motorola that the new baseband switcher uses.
Maniac had quite a few CM7 updates last week, and that's always good.
Hopefully I'll be back in business by Monday.
//If you're wanting to try out Linux, I gotta recommend Mint 13 Xfce to ya. The install is painless and the system's ran good and stable so far. One of my best Linux experiences.
Click to expand...
Click to collapse
Hope you get back soon, these cm7 builds are great!
When will you build jelly bean roms?
josuearisty said:
Hope you get back soon, these cm7 builds are great!
When will you build jelly bean roms?
Click to expand...
Click to collapse
Just accessed my old encrypted home, copying all my files to another drive. Then I'm gonna format it and make it my android partition. Should be back in the game soon.
I'll make jellybean roms as soon as I can get it to start compiling....especially since Salad Bar, Paranoid Android, and other cool mods are switching to jb. CM7's gonna come first, but I'll get to jb during the next week.
skeevy420 said:
Just accessed my old encrypted home, copying all my files to another drive. Then I'm gonna format it and make it my android partition. Should be back in the game soon.
I'll make jellybean roms as soon as I can get it to start compiling....especially since Salad Bar, Paranoid Android, and other cool mods are switching to jb. CM7's gonna come first, but I'll get to jb during the next week.
Click to expand...
Click to collapse
Don't work too hard! We can't thank you enough for what you do!
Dr. Orange said:
Don't work too hard! We can't thank you enough for what you do!
Click to expand...
Click to collapse
Woop, recovered all my Android files. I'm so glad I didn't lose all of it. I'd of had suicide level depression if I didn't. Especially since I had to look long and hard for the right tools to do the job (that's what she said). Time to format my old system partiton with a 20 gb recovery partition with tons of recovery tools and another partition for android development.
Then its time to set up my build environment. That'll take a while. The sdk alone is about a 1 hr ordeal, the CM7 sync is anther 1.5-2 hrs, CM9 is about a 45 min sync, the app install for everything is another 30 mins. And all those times are in a perfect world with maxed out dl speeds.
About done with all my sysyem themeing. I prefer a black desktop since its much easier staring at a dark 42" screen over a bright one for hours on end, and its eaisre to read. See the screenshot to see what I'm talking about
Also gonna look into adding aroma to the CM7 Kangs. I thought about making a lightweight rom with update zips for full CM, but Aroma will let us choose what system apps you don't want, allow easy modding and tweaks. If done right, it'll give the Kangs full White Rabbit customization without me having to port WR.
skeevy420 said:
Woop, recovered all my Android files. I'm so glad I didn't lose all of it. I'd of had suicide level depression if I didn't. Especially since I had to look long and hard for the right tools to do the job (that's what she said). Time to format my old system partiton with a 20 gb recovery partition with tons of recovery tools and another partition for android development.
Then its time to set up my build environment. That'll take a while. The sdk alone is about a 1 hr ordeal, the CM7 sync is anther 1.5-2 hrs, CM9 is about a 45 min sync, the app install for everything is another 30 mins. And all those times are in a perfect world with maxed out dl speeds.
About done with all my sysyem themeing. I prefer a black desktop since its much easier staring at a dark 42" screen over a bright one for hours on end, and its eaisre to read. See the screenshot to see what I'm talking about
Also gonna look into adding aroma to the CM7 Kangs. I thought about making a lightweight rom with update zips for full CM, but Aroma will let us choose what system apps you don't want, allow easy modding and tweaks. If done right, it'll give the Kangs full White Rabbit customization without me having to port WR.
Click to expand...
Click to collapse
Excellent, hope you get on the road very very soon
Problems logging in to google account
Hi. I instaled this on one of my phones and everything is perfect, however, with my other Bravo, Im gaving problems because I get: cant establish a reliable data connection to the server... and I can never log in to google... any ideas? I have already tried clearing cache, and resintalling everyting from scratch, to no avail. and I know google is not down because I can creat and log into another account with my other bravo.
marcelarr said:
Hi. I instaled this on one of my phones and everything is perfect, however, with my other Bravo, Im gaving problems because I get: cant establish a reliable data connection to the server... and I can never log in to google... any ideas? I have already tried clearing cache, and resintalling everyting from scratch, to no avail. and I know google is not down because I can creat and log into another account with my other bravo.
Click to expand...
Click to collapse
Try using static IP.
In wifi settings press menu>advanced>use static ip.
Trata de usar una estatica!
josuearisty said:
Try using static IP.
In wifi settings press menu>advanced>use static ip.
Trata de usar una estatica!
Click to expand...
Click to collapse
Tried it... it does not work! Ive been looking for threads on this all morning...
did the airplane mode and wifi on ... didnt work
tried signing in with youtube
tired reinstalling and wiping cache and didnt work either...
Is there any way I can go back to the stock motorola rom...
marcelarr said:
Tried it... it does not work! Ive been looking for threads on this all morning...
did the airplane mode and wifi on ... didnt work
tried signing in with youtube
tired reinstalling and wiping cache and didnt work either...
Is there any way I can go back to the stock motorola rom...
Click to expand...
Click to collapse
Goto to this thread:
http://forum.xda-developers.com/showthread.php?t=1559109
Download files and follow instructions.
josuearisty said:
Goto to this thread:
http://forum.xda-developers.com/showthread.php?t=1559109
Download files and follow instructions.
Click to expand...
Click to collapse
THanks... will do... just to let you know this second phone has always given me some sort of problem.... I had trouble when I rooted it because, the enable non market app would never stay that way. When I first enabled non market apps with superoneclick I could install no market apps. But after some time when by when I tried to install a non market app it kept telling me that I couldn't so I had to enable non market apps again. I thought that was weird, because device number 1 never gave me those issues. Anyway, on device number 1 everything from kangs cm7 worked...
As a followup to this problem, I tried connecting to Google on another wifi hotspot and it worked... I guess the settings of my IP are somehow incorrect at home, does anyone have any idea on what the correct settings should be... I can connect to Google at home once Im signed in from another IP.
Just wondering if this could be due to a CM7 issue because It never happened when my phone was in stock rom.
Also... I cannot purchase apps when connected to the wifi at home... I have to go somewhere else...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introducing SlimBean for the P93x and SU640. This is Android version 4.2.2. This build is unofficial, and as such, is not supported by the Slimroms dev team.
About ROM
1. To read more about SlimBean, check out their website: www.slimroms.net
2. Built from SlimBean source using the CM device tree.
3. Stock CM kernel on build 8+
4. For a full list of features, see here.
5. SlimBean changelog can be found here
6. This ROM requires a modified DPI play store. Please read the instructions below.
Installation Instructions
1. Place ROM on SD card.
2. Boot to recovery
3. If coming from other ROMs or from SlimBean v3.x, wipe data, cache, dalvik, and system before flashing. If upgrading from a previous version of SlimBean 4.2+, simply wipe cache and dalvik before flashing the zip.
4. Flash ROM
5. Flash gapps
**Important note: Gapps are not included with this ROM. Although there is a slim-gapps and other extras listed on the Slimroms website, I have had no luck getting them to function correctly. It wouldn't hurt to try them; the worst thing that could happen is you would have to re-flash the ROM. If it works for you, let me know. Otherwise, to get around this, I flash the standard gapps package first, then the modded multi-DPI play store found in I hope it really goes without saying, but be sure you are using the correct version of gapps and the multi-DPI play store; which is 4.2+.
Credits
Thanks to the SlimRoms team for the permission to use their source and release to the community; HO!NO! for allowing me to use his kernel source for v3.1.0 and 3.1.2; thomas.raines and Team FahQ for the use of the LZ kernel; tdmcode for offering his knowledge and expertise; and x0dus for helping me get it ready-enough for initial release. If I have left anyone out, it's most certainly not intentional; just let me know and I'll add you to the list!
Source
Slimroms source
My github
Bugs
Because this is a learning experience for me, please don't expect me to be able to instantly fix the bugs. Simply post any bugs found and I will do my absolute best to fix them. Any insights into problems are more than welcome.
Download
DOWNLOAD LINK.
For P93x devices, select the "Slim-p930" zip
For SU640 devices, select "Slim-su640" zip.
reserved.
Downloaded, but couldn't get openpdroid to patch correctly so waiting to try it out. Will give feedback once that's all fixed.
Re: [ROM] [P93x] [Unofficial] SlimBean
Running since yesterday. So far, real good. Knock on wood. No bsod, no random reboots, bluetooth, wifi, network all work fine, no glitches so far. Started with a clean install. Gets a slight bit warmer than Ho!No!'s FT9, but nothing crazy. Battery is not throwing any red flags with crazy drainage yet.
Sent from my LG-P930 using xda premium
DroiDIY said:
Running since yesterday. So far, real good. Knock on wood. No bsod, no random reboots, bluetooth, wifi, network all work fine, no glitches so far. Started with a clean install. Gets a slight bit warmer than Ho!No!'s FT9, but nothing crazy. Battery is not throwing any red flags with crazy drainage yet.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
There will be some BSOD's and random reboots. I woke up this morning to a dead battery, even though it was on charge all night; it had BSOD'd while I was asleep and drained completely. I am working to resolve them, but no real ETA.
Sandpapers said:
Downloaded, but couldn't get openpdroid to patch correctly so waiting to try it out. Will give feedback once that's all fixed.
Click to expand...
Click to collapse
Are you saying that's a problem on my end or with OpenPdroid?
Re: [ROM] [P93x] [Unofficial] SlimBean
I'll keep an eye on the thread. Thanks for the heads up. I'll report back with any issues that might arise.
Sent from my LG-P930 using xda premium
lordcheeto03 said:
Are you saying that's a problem on my end or with OpenPdroid?
Click to expand...
Click to collapse
My apologies. It is nothing on your end. It is with the patcher provided by pdroid / openpdroid. I just don't use a ROM until I can get it working. I love denying permissions with it.
Weird, it reported GMail as not compatible with this rom..
notzippy said:
Weird, it reported GMail as not compatible with this rom..
Click to expand...
Click to collapse
What gapps did you use? I haven't had any luck using slim-gapps. I'm personally using 20121011 gapps with the modded DPI play store that I linked to in the OP. Again, I've had no luck using the modded play store that slim provides. No specific reason I'm using that particular version of gapps, just that I haven't downloaded a newer version since it came out. Flash gapps, then the modded play store and everything should work as it's supposed to.
I know the problem is with the LCD density that is set in build.prop; the Nitro's original density is 320, but build.prop sets it to 241. The original play store doesn't like that; hence the reason a modded DPI store is required. You can change it and there wont' be a need to use a modded play store. I mean it doesn't have any adverse effects to set it back, but the ROM will look completely different.
Got another BSOD last night while sleeping. Got a last_kmsg, now to learn how to read and understand what they tell me.
Downloading, will try it out later today, i ll report later, should be awesome, love HO!NO!'s Hyper Sonic Kernel
Love the rom, but big problem for me is that, most of my apps arent compatible with this rom ... cant load them from play store ... any idea ?
Android Keyboard is broken on my phone. I've tried Fixing Permissions and that didn't seem to help any, I'm going to do some research on this and see if it isn't something I can fix myself but if anyone has an idea on how to fix this I'd love to hear them.
edit- After installing Hackers Keyboard, I was able to bypass the message completely. If anyone else has this issue they can download the keyboard here.
Re: [ROM] [P93x] [Unofficial] SlimBean
just1nsama said:
Love the rom, but big problem for me is that, most of my apps arent compatible with this rom ... cant load them from play store ... any idea ?
Click to expand...
Click to collapse
Did you use the modded play store i linked to? A lot of your apps will report as incompatible unless you use that play store.
Sent from my LG-P930 using xda premium
Re: [ROM] [P93x] [Unofficial] SlimBean
joshgee said:
Android Keyboard is broken on my phone. I've tried Fixing Permissions and that didn't seem to help any, I'm going to do some research on this and see if it isn't something I can fix myself but if anyone has an idea on how to fix this I'd love to hear them.
edit- After installing Hackers Keyboard, I was able to bypass the message completely. If anyone else has this issue they can download the keyboard here.
Click to expand...
Click to collapse
I don't recall having any problems with the aosp keyboard, but I also flashed my TiBu update.zip after the initial boot as well; which included my previously set-up SwiftKey Flow. But i will try it on a clean flash to try and reproduce the problem.
EDIT: I tried reproducing the problem with the Android Keyboard and I didn't have any problems. I'm not saying you didn't, I was just unable to recreate the problem. What was the message it was giving you?
Sent from my LG-P930 using xda premium
lordcheeto03 said:
Did you use the modded play store i linked to? A lot of your apps will report as incompatible unless you use that play store.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Yea man thanks, my bad, didnt pay enought attention to the original post, it works now ! No big problems with the rom yet, loving it so far, very custumizable and love HO!NO!'s Hyper Sonic Kernel, will report if running into bugs.
Keep up the good work :good:
just1nsama said:
Yea man thanks, my bad, didnt pay enought attention to the original post, it works now ! No big problems with the rom yet, loving it so far, very custumizable and love HO!NO!'s Hyper Sonic Kernel, will report if running into bugs.
Keep up the good work :good:
Click to expand...
Click to collapse
No biggie. I understand it's a little different than other ROMs in that sense. I should probably make that section a little more visible; I actually fought with that same exact problem for about 3 days before I realized why Gmail and various other apps were saying I had an incompatible device.
Also, if anyone can point me where to get the correct vendor proprietary files for the su640 - if they're different from the p930 files that is - I will try to get a build posted later tonight.
Re: [ROM] [P93x] [Unofficial] SlimBean
Has anyone tried Google talk on this? I Have been having audio issues on other cm10 ROMs.
Sent from my aokp_tenderloin using xda app-developers app
khanfed said:
Has anyone tried Google talk on this? I Have been having audio issues on other cm10 ROMs.
Sent from my aokp_tenderloin using xda app-developers app
Click to expand...
Click to collapse
I use Google talk, but I don't use the audio portion; what problems are you having?
Re: [ROM] [P93x] [Unofficial] SlimBean
lordcheeto03 said:
I use Google talk, but I don't use the audio portion; what problems are you having?
Click to expand...
Click to collapse
During video chat I can hear the other person fine, but they can't hear me.
Last time it worked for me was when I was using full throttle ROM.
Sent from my LG-P930 using xda app-developers app
This is the discussion and bug report thread about Arsradu´s [ROM][JB][4.3.1][JLS36I] CyanogenMod 10.2 Alpha (Build 9)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Current build:
CyanogenMod 10.2 - Alpha 9 - 20140916 by arsradu
Download:
CM-10.2 Alpha 9: Link. md5sum: fde73d938ac4ccff8f76541331217ebf
Mirror1: here.
Gaaps: GAAPS 20130813 md5sum: 1f51b5cc6370c1f45dc951109b6ce6ed
Gaaps: Gapps 20140726 (unofficial) - (new) md5sum: a4764538bc4b3737fa7cc78788fd69e9
YOU need to use CWM v6.0.4.4 ( v6.0.3.8 and up) to get it working correctly![RECOVERY] ClockworkMod v6.0.4.4
With older CWM Recovery versions you will get a bootloop, so update your Recovery too!
To swap memories (internal with external SD Cards) you need to go to /system/build.prop using any File Explorer with root privileges (recommended X-Plore) and change from 0 to 1 in the code below:
Before
Code:
# Change to 1 for swapping SD cards
persist.sys.vold.switchexternal=0
After
Code:
# Change to 1 for swapping SD cards
persist.sys.vold.switchexternal=1
Bugs reported (Build ALPHA 9): -
-
For installation, first, make sure you got CM10.2 ROM and the correct Gapps on your External SD Card. Both can be found in the links above.
After that, enter CWM and:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 (external_sd) by mistake)
install CM10.2 (from the external sd)
install Gapps for JB+ (from the external sd)
reboot your phone
Please, note that every step of this tutorial is mandatory!
This is still not a pristine Installation! A pristine installation requires to whipe both SDCards and only copy the installation files to the external SDCard, so there is nothing else than the ROM and Gaaps.
Therefore also delete the Android folder on your SDCard left by the previous ROM as well as the Thumbnail folder in the DCIM folder! You can do this after flashing the ROM. Just delete them and reboot. Don´t worry, both will be rebuild by the new ROM.
Do NOT restore backup data of system apps!
In general this ROM will restore your apps automatically from the PlayStore and only download the ones that are compatible with this ROM, so restoring a backup isn´t needed and also not recommended.
If there is still a need to restore applications, make sure you only restore 3rd party apps and preferably apks only. No app data. SMS, contacts, calendar entries, pictures, videos should be safe to restore.
If you're installing this ROM after stock ROM (Android 2.3.6), CM9 (Android 4.0.4) or CM10 (Android 4.1.2), we highly recommend redownloading the apps rather than restoring them from a backup. They might not be fully compatible and might cause troubles. As a general suggestion, try to keep your ROM as clean as possible.
Click to expand...
Click to collapse
How to post a bug:
Please copy the following code in your post and fill in the information:
ATTENTION! Posts about bugs caused by custom Kernels or MODs will be ignored! Post them in the specific Kernel / MOD Thread but not here.
HTML:
[B]Version:[/B] CM10.2 - WRITE HERE THE RELEASE. (For example ALPHA 9)
[B]App/Game/Subject:[/B] WRITE HERE SUBJECT
[B]Bug title:[/B] WRITE HERE BUG TITLE
[B]Probability of occurrence:[/B] WRITE HERE "LOW/MEDIUM/HIGH" (depending on how often the bug occurs)
[B]Description:[/B] WRITE HERE DESCRIPTION
[B]Log:[/B] ADD A LOGCAT IF YOU CAN
[B]Screenshoot:[/B] MAKE A SCREENSHOOT
Thanks...
Just took a look before creating... And here it is! :lol:
Sent from my GT-I8150 using Tapatalk 4
honeyx said:
Ok, since noone started this till now, I will create this thread to keep the dev thereads clean. Discuss your bugs and issues here if you like.
Just I´m not going to maintain the whole thread. If anyone is willing to take over this thread and maintain it, I have no problem with that
Click to expand...
Click to collapse
Thanks, man! I would have done it earlier but since the thread in Development section refers to two ROMs (CM10.2 and Carbon) and since CM10.2 is actually still in preview stage (though really well done preview, I must admit) I thought it would be better to see where this is going first, and only after that, open a thread into General section. But if you did it, that's fine too.
About not maintaining this thread...I'm not sure that's a good thing. And once you opened it, there is no way someone else could take over it since..well, you opened it and no changes can be made on the OP (unless you're willing to share your password, which I suppose you're not).
arsradu said:
And once you opened it, there is no way someone else could take over it since..well, you opened it and no changes can be made on the OP (unless you're willing to share your password, which I suppose you're not).
Click to expand...
Click to collapse
Exactly what I was thinking about...
Sent from my GT-I8150 using Tapatalk 4
arsradu said:
Thanks, man! I would have done it earlier but since the thread in Development section refers to two ROMs (CM10.2 and Carbon) and since CM10.2 is actually still in preview stage (though really well done preview, I must admit) I thought it would be better to see where this is going first, and only after that, open a thread into General section. But if you did it, that's fine too.
About not maintaining this thread...I'm not sure that's a good thing. And once you opened it, there is no way someone else could take over it since..well, you opened it and no changes can be made on the OP (unless you're willing to share your password, which I suppose you're not).
Click to expand...
Click to collapse
Yes I know but the topic header can be changed any time so it fits the rom you will be diuscussing about. About taking over a thread I think this is no problem for the Moderators to change the owner. Have seen already some threads to be taken over by new Moderators. But if this shouldn´t be possible for some reason, there is another solution. I can keep my first post clean, so it can be maintained in the secound or third post
Last but not least I can ask to delete it, so a new one can be created.
Should we focus on 4.2 or 4.3? i hope one of the half best tester on 4.2 should try 4.3
Dhada said:
Should we focus on 4.2 or 4.3? i hope one of the half best tester on 4.2 should try 4.3
Click to expand...
Click to collapse
I will test CM10.2 myself as I´m also interested how well it´s working. But about the difference between CM 10.2 and Carbon 4.3, isn´t the Carbon a themed CM10.2?
I also think it should be no problem to create our own working Gaaps we can use for this ROM.
Just got back from vacation as I told in the dev-section, and I only got one question: did you guys modify GApps in some way to make it work, or something in the ROM? I can just use the official GApps from goo.im which I already downloaded to use with my grouper, can't I?
Otherwise my PC will be an insane mess with all different kinds of GApps floating around
SGWUser said:
Just got back from vacation as I told in the dev-section, and I only got one question: did you guys modify GApps in some way to make it work, or something in the ROM? I can just use the official GApps from goo.im which I already downloaded to use with my grouper, can't I?
Otherwise my PC will be an insane mess with all different kinds of GApps floating around
Click to expand...
Click to collapse
Yes, you should be able to use the official Gapps now, if you want to. The problem was not in the Gapps, was in the ROM.
And...welcome back! Got new ROM for you.
Ok, as for annoyances found so far:
1) Green color while taking a picture and switching between cameras. Focal camera has green artifacts everytime and freezes at first shot taken as already known issue with majority of 3rd party apps.
2) Small artifacts taking panorama shot.
3) Apollo FC at first run after pristine install. Already known for CM10.1.
4) Sometimes widgets (like contact 4x1) and shortcuts of Google apps disappear from the desktop. I just encountered that few times without going into depth. Will try to give repro rate.
5) Electron Beam animation while locking the device is buggy. I turn it off in display setting and feel much better.
That's all I remember by now. And why I say annoyances? Because all those things aren't so nagging as Gapps problem fixed yesterday.
Taking into account that it's only 1st release... Hell it's smooth and usable.
And one thing that I liked so much...
A new feature in camera in video recording.
Time Lapse
Sent from my GT-I8150 using Tapatalk 4
LeroViten said:
Ok, as for annoyances found so far:
1) Green color while taking a picture and switching between cameras. Focal camera has green artifacts everytime and freezes at first shot taken as already known issue with majority of 3rd party apps.
2) Small artifacts taking panorama shot.
3) Apollo FC at first run after pristine install. Already known for CM10.1.
4) Sometimes widgets (like contact 4x1) and shortcuts of Google apps disappear from the desktop. I just encountered that few times without going into depth. Will try to give repro rate.
5) Electron Beam animation while locking the device is buggy. I turn it off in display setting and feel much better.
That's all I remember by now. And why I say annoyances? Because all those things aren't so nagging as Gapps problem fixed yesterday.
Taking into account that it's only 1st release... Hell it's smooth and usable.
And one thing that I liked so much...
A new feature in camera in video recording.
Time Lapse
Sent from my GT-I8150 using Tapatalk 4
Click to expand...
Click to collapse
Great list btw, i saw what you did there=P.. Sory just had to say it
Sent from my GT-I8150 using xda app-developers app
K&Q said:
Great list btw, i saw what you did there=P.. Sory just had to say it
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
You're exaggerating, dude!
But, yeah... You made me laugh... :lol:
Sent from my GT-I8150 using Tapatalk 4
Is there a way to save photo taken to external sd instead of internal? BTW, I think I found a bug : apps that put in a folder on desktop (by dragging an app to another) will randomly disappear after reboot.
I am using this rom + Seeder 7 Script and it's working really perfect! Many thanks @ all devs involved in this rom!
kai92 said:
Is there a way to save photo taken to external sd instead of internal? BTW, I think I found a bug : apps that put in a folder on desktop (by dragging an app to another) will randomly disappear after reboot.
Click to expand...
Click to collapse
I don't think so. And yes, this is a bug.
Sent from my GT-I8150 using Tapatalk 4 Beta
Forgot to add that I am using carbon
did anyone facing this problem too? system UI FC after change languange in setting languange and input?
jiunks said:
did anyone facing this problem too? system UI FC after change languange in setting languange and input?
Click to expand...
Click to collapse
No...
Sent from my GT-I8150 using Tapatalk 4 Beta
idk
well ..... hey guys ... thanks 2 all xda dev. looking after our wonder then
i dont know it is from JB 4.3 BUT if have recently flashed it and it worked great but i have noticed that when i play some music and go to whats app or facebook (multitasking) the music stops although the app is showing playing within the notification this happend to me only after flashing cm10.2 and the i pro. Growl and i have tried to flash a diff. android like 4.1.2 this happend again so whats the problem and how to fix this s**t
thanks to all our devolopers
and sorry for my bad english .
meroonly1 said:
well ..... hey guys ... thanks 2 all xda dev. looking after our wonder then
i dont know it is from JB 4.3 BUT if have recently flashed it and it worked great but i have noticed that when i play some music and go to whats app or facebook (multitasking) the music stops although the app is showing playing within the notification this happend to me only after flashing cm10.2 and the i pro. Growl and i have tried to flash a diff. android like 4.1.2 this happend again so whats the problem and how to fix this s**t
thanks to all our devolopers
and sorry for my bad english .
Click to expand...
Click to collapse
Unfortunately I faced that problem once or twice too... This happens because we have too low RAM.
Precisely, LMK kills background applications when the device is running out of RAM (multitasking). The only solution by now is having a custom kernel like Hurtsky and add DSPM and Apollo to the list of unkillable processes.
Sent from my GT-I8150 using Tapatalk 4
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
INSTRUCTIONS
First time installing CyanogenMod 10.2 to your Galaxy Note 10.1 LTE I925, or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM10.2 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Reboot
DOWNLOADS
CM10.2 official nightly builds:
http://www.get.cm/?device=i925
Google Apps:
http://goo.im/gapps
CHANGELOG
http://changelog.bbqdroid.org/#i925/cm10.2/next
BUG LIST
-GPS may or may not work
-BT Voice Search
-5ghz wifi - seems to only work with low channels
-Minor graphical issues (occasional black screen)
TEAMHACKSUNG SUPPORT CHAT
Webchat: http://webchat.freenode.net/?channel...cksung-support
Server: chat.freenode.net
Channel: #teamhacksung-support
Don't expect any support if you:
- are not running stock cm-kernel
- have installed any mods
- have modified system files
DEAR KANGERS
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
Deleted
Sent from my SPH-L710 using Tapatalk 2
So I installed the jailbreak a few months back and have been waiting eagerly for a ROM and searching around... but from what I have read, the sch-i925 version note 10.1 doesn't have the same partitions as other 10.1's, so I haven't found a ROM for it.
What confuses me is that people seem to be returning back to stock... and in the first line of the instructions of this ROM I find:
First time installing CyanogenMod 10.2 to your Galaxy Note 10.1 LTE I925, or coming from another ROM:
Click to expand...
Click to collapse
So... what other ROM?? How did I miss that?
I'm super happy that I finally find a ROM for this tablet, but why now a few day's after the first post of this great news... why I'm the first posting here?? Nobody else jumping out of their seats in joy??
Also, I'm curious... does the CM include phone capabilities? I'm in Iceland and the Icelandic version of this tablet is basically just a very large phone, I'm hoping this ROM will get me there since now I cant even use the mobile networks at all because I have no Verizon SIM and even if I did - it would be ridiculously expensive
I'm looking forward to testing this out, will post my results
Snarlster said:
So I installed the jailbreak a few months back and have been waiting eagerly for a ROM and searching around... but from what I have read, the sch-i925 version note 10.1 doesn't have the same partitions as other 10.1's, so I haven't found a ROM for it.
What confuses me is that people seem to be returning back to stock... and in the first line of the instructions of this ROM I find:
So... what other ROM?? How did I miss that?
I'm super happy that I finally find a ROM for this tablet, but why now a few day's after the first post of this great news... why I'm the first posting here?? Nobody else jumping out of their seats in joy??
Also, I'm curious... does the CM include phone capabilities? I'm in Iceland and the Icelandic version of this tablet is basically just a very large phone, I'm hoping this ROM will get me there since now I cant even use the mobile networks at all because I have no Verizon SIM and even if I did - it would be ridiculously expensive
I'm looking forward to testing this out, will post my results
Click to expand...
Click to collapse
there aren't many users of the i925 which is why there haven't been lots of responses. And yes it is setup as a large phone but for verizon.
Sent from my SCH-I605 using xda app-developers app
there aren't many users of the i925 which is why there haven't been lots of responses. And yes it is setup as a large phone but for verizon.
Click to expand...
Click to collapse
Do you mean it includes the phone app, but somehow is still limited to Verizon?? If its a new ROM, why is it still locked to a certain carrier??
So I was about to install CWM when I got into trouble connecting detecting the tablet with both heimdall and odin. Adb detects the device... perhaps a driver issue because of ADB... perhaps it doesnt matter
I booted into recovery only to find the TWRP that I haven't used yet, it came when I installed adams jailbreak. Im not familiar with TWRP but it looks pretty good. Do I need to install CWM or is TWRP good enough??
*edit: No problem connecting to ODIN on a different computer, so now I can install CWM if needed.
Could you let me know if I can use the TWRP recovery instead of the CWM?
Also, did you mean that this ROM is locked to Verizon mobile network?
Snarlster said:
Could you let me know if I can use the TWRP recovery instead of the CWM?
Also, did you mean that this ROM is locked to Verizon mobile network?
Click to expand...
Click to collapse
I believe this rom is specifically for the verizon version of the n8020. There is a port for the international version.
smegg said:
I believe this rom is specifically for the verizon version of the n8020. There is a port for the international version.
Click to expand...
Click to collapse
I also believe that this rom is specifically for the verizon version of the n8020 (the sch-i925). I have the Verizon SCH-i925 Samsung Galaxy Note 10.1 which is a LTE version. So this rom should fit pretty well I dont believe I can use the n8020 ROM's because of some different partitions from what I have read.
Can I install this rom with TWRP recovery or is CWM a prerequisite?
I didn't quite understand your reply, even if the Rom is designed specifically for this tablet, that does not mean it is still locked to the network provider. Is it still locked?
Thanks again, cant wait to try it
Snarlster said:
I also believe that this rom is specifically for the verizon version of the n8020 (the sch-i925). I have the Verizon SCH-i925 Samsung Galaxy Note 10.1 which is a LTE version. So this rom should fit pretty well I dont believe I can use the n8020 ROM's because of some different partitions from what I have read.
Can I install this rom with TWRP recovery or is CWM a prerequisite?
I didn't quite understand your reply, even if the Rom is designed specifically for this tablet, that does not mean it is still locked to the network provider. Is it still locked?
Thanks again, cant wait to try it
Click to expand...
Click to collapse
cwm is just recommended for official cm builds but twrp should work. and no its not locked onto verizon it is just designed for it. moving it to another carrier would require slight modification
Sent from my SCH-I605 using xda app-developers app
So the install went great - No problems with TWRP, ROM or Gapps... smooth sailing!
The only changes to the tablet prior to this install was following Adams guide on how to unlock the bootloader. I also had not installed any updates from Verizon.
The ROM I installed was the cm-10.2-20130904-NIGHTLY-i925.
I also didn't install CWM, the TWRP that i got from unlocking the bootloader worked just fine.
Here is the bug list:
The Bug List:
1. GPS is working just fine.
2. I haven't tried the BT voice search.
3. 5ghz WIFI not working - I also needed to reboot to get 2.4ghz working again
4. No graphical issues yet, I test played raging thunder racing game and no problems there at least.
Other Bugs:
Camera:
No camera app found. I installed Nexus camera from market but it gave an error: "Can't connect to the camera". Also, my flashlight app can not use the camera flash.
I noticed that in folder /root/sys/class/camera/ there is only two documents "front" and "rear" which are both empty 0.00B files. Was looking for the cause, perhaps this helps?
Mobile network *Edit: Not a problem anymore:
In order to search for networks, the APN needs to be configured first! I am using my normal phone Icelandic SIM now and can use 3G in here in Iceland, send texts and after downloading a dialer I can now make phone calls also
Besides that, the OS is working great... 4.3 is pretty cool Its a real bust that the camera isn't working, I hope that gets fixed since its the only downside of this upgrade.
I'll keep a watch on this forum, so let me know if I can send you any info about my install. I'll also keep an eye on the upgrades and report if my problems get solved
Thanks for this ROM
Snarlster said:
So the install went great - No problems with TWRP, ROM or Gapps... smooth sailing!
The only changes to the tablet prior to this install was following Adams guide on how to unlock the bootloader. I also had not installed any updates from Verizon.
The ROM I installed was the cm-10.2-20130904-NIGHTLY-i925.
I also didn't install CWM, the TWRP that i got from unlocking the bootloader worked just fine.
Here is the bug list:
The Bug List:
1. GPS is working just fine.
2. I haven't tried the BT voice search.
3. 5ghz WIFI not working - I also needed to reboot to get 2.4ghz working again
4. No graphical issues yet, I test played raging thunder racing game and no problems there at least.
Other Bugs:
Camera:
No camera app found. I installed Nexus camera from market but it gave an error: "Can't connect to the camera". Also, my flashlight app can not use the camera flash.
I noticed that in folder /root/sys/class/camera/ there is only two documents "front" and "rear" which are both empty 0.00B files. Was looking for the cause, perhaps this helps?
Mobile network *Edit: Not a problem anymore:
In order to search for networks, the APN needs to be configured first! I am using my normal phone Icelandic SIM now and can use 3G in here in Iceland, send texts and after downloading a dialer I can now make phone calls also
Besides that, the OS is working great... 4.3 is pretty cool Its a real bust that the camera isn't working, I hope that gets fixed since its the only downside of this upgrade.
I'll keep a watch on this forum, so let me know if I can send you any info about my install. I'll also keep an eye on the upgrades and report if my problems get solved
Thanks for this ROM
Click to expand...
Click to collapse
camera had worked up until a few days ago an opensource camera hal replaced the camera wrapper. I haven't made the change to build the oss camera yet as only the front cam works with it. I'm working on getting them both functional.
Sent from my SCH-I605 using xda app-developers app
sbrissen said:
camera had worked up until a few days ago an opensource camera hal replaced the camera wrapper. I haven't made the change to build the oss camera yet as only the front cam works with it. I'm working on getting them both functional.
Click to expand...
Click to collapse
Great, cant wait to see whats to come!
Would I then perhaps be better set with a camera by taking an older rom, 1st of September for example?
Snarlster said:
Great, cant wait to see whats to come!
Would I then perhaps be better set with a camera by taking an older rom, 1st of September for example?
Click to expand...
Click to collapse
Yes
Sent from my GT-N5110 using xda app-developers app
sbrissen said:
Yes
Sent from my GT-N5110 using xda app-developers app
Click to expand...
Click to collapse
Installed the september 1st ROM and now I have camera
Snarlster said:
Installed the september 1st ROM and now I have camera
Click to expand...
Click to collapse
How would I find the Sept 1 nightly? http://www.get.cm/?device=i925&type= no longer has the link.
jraskal said:
How would I find the Sept 1 nightly? http://www.get.cm/?device=i925&type= no longer has the link.
Click to expand...
Click to collapse
Good question, I'm glad I downloaded all of them, I suspected they might only have space for 5 there! Just wait a second, I'll google this for you.
Sorry for the wait, it was only a minute though... but I found this for you:
http://goo.im/devs/cm/i925/nightly
I guess I didn't need to download all of them after all. By the way, September 2 worked better than September 1 so Im using that now.
Im going to check the 8th of sept ROM tonight... perhaps its all fixed there, will report
I've got the latest 9/9 nightly flashed on my i925 and don't see an option to add APN's nor make calls.
Can I just download any Dialer from the market and calling will work?
My intention is to test it with the AT&T $35 month prepaid plan, but I hear already that supposedly Medianet Internet doesn't work.
If that doesn't pan out, I'm going to be trying a Staight Talk AT&T sim.
*EDIT* I downloaded Dialer One and that seems to work
@Snarlster, how did you edit the APN for data?
TBH I think so far the features of stock are more rich
jraskal said:
I've got the latest 9/9 nightly flashed on my i925 and don't see an option to add APN's nor make calls.
Click to expand...
Click to collapse
It should be found in Settings--> More--> Mobile networks--> Access Point Names
how did you edit the APN for data?
Click to expand...
Click to collapse
You need to create an APN in "Access Point Names". (press + sign at top right)
You should only needed to set the Name (You create name) + APN (supplied by provider), here in Iceland they provide this information on their webpage.. can be fine to add more settings but this is the minimum (at least here).
*remember to save, I missed it at least the first time but you got to press the 3 dots in top right and press save.
After that, search for networks, if error then restart and search for networks again.
Can I just download any Dialer from the market and calling will work?
*EDIT* I downloaded Dialer One and that seems to work
Click to expand...
Click to collapse
Yes Im pretty sure any dialer works, there's lots to choose from.
My intention is to test it with the AT&T $35 month prepaid plan, but I hear already that supposedly Medianet Internet doesn't work.
If that doesn't pan out, I'm going to be trying a Staight Talk AT&T sim.
Click to expand...
Click to collapse
Good luck with that, I just threw my work phone's SIM card in the tablet, dont use the phone that much so it was perfect, now I have a work tablet instead of a work phone... but I can receive and make phonecalls and texts, I'll just have to find that blootooth earpiece I have somewhere and that should be perfect
TBH I think so far the features of stock are more rich
Click to expand...
Click to collapse
I prefer this look, the main thing is to get all that Verizon crap out and to finally have control over this thing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't seem to have the option to add APN's. I could do it on stock
Sent from my SCH-I925 using Tapatalk 4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CM12.0 is here for the LS980, aka the Sprint LG G2.
This is a source build rom, which includes all the latest changes from cm.
Instructions
This will boot on zv7/zv8 firmware. ZVA modem support is coming soon, as sprint is continuing to roll out 2.5, triband support is becoming useful.
Download cm-12.0, and gapps. Put them on your sdcard, reboot to recovery. Flash, and enjoy!
The latest will be available at:
http://get.cm/?device=ls980
Gapps:
Official CM ones (soon):
http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
Known Issue
GPS on LTE (Testing a fix now)
Click to expand...
Click to collapse
Change Log
Click to expand...
Click to collapse
Special Thanks To!
None of this would be possible without the following people:
acree
Click to expand...
Click to collapse
Source
http://github.com/CyanogenMod
Click to expand...
Click to collapse
Awesome Thank you !
Oh wait one question the list start with cm-11 and all the way down is cm-11 am i missing something here lol. I have the cm-12-20141226-EXPERIMENTAL-SU6-ls980.zip install at the moment i would love to installed the stable but as i said the list only saids cm-11
thanks
I have the same question as above ^
Sent from my iPhone using Tapatalk
powerwagon said:
I have the same question as above ^
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
yeah i even reviewed all devices and it does not show cm 12 stable at all im searching all over now, i mean the download list for ls980 doesnt even show cm-12 for anything at all
---------- Post added at 06:20 AM ---------- Previous post was at 05:59 AM ----------
only thing i found closest to todays date for a release of cm for ls980 was a cm-resurrection rom its lollipop 5.0.2
here the download page link https://www.androidfilehost.com/?w=files&flid=22680
and hers the original thread http://forum.xda-developers.com/lg-g2/development/rom-resurrectionremix-lpalpha-t2969200
That's because cm12 for our device was just released today, our first nightly is available for download. Check it out let us know how it runs
Sent from my LG-LS980 using XDA Free mobile app
I get a boot loop when i try to flash this rom, any reason why?
be_CZAR said:
I get a boot loop when i try to flash this rom, any reason why?
Click to expand...
Click to collapse
Try wiping cache and dalvik cache.
Sent from my LG-ls990 using XDA Free mobile app
can we go from the experimental to this one or should we start from scratch?
i get the bootloop too? could it be from using the apps package from the experimental build?
be_CZAR said:
I get a boot loop when i try to flash this rom, any reason why?
Click to expand...
Click to collapse
When this happened to me it was because I didn't know to downgrade the radio to ZV8. Once I did that the ROM booted OK.
CAUTION backup your modem and EFS before you downgrade so you can restore them if you want to go back to a newer stock ROM- EFS might not change but modem for sure. I spent a whole day with "no service" trying to get back to ZVE which has been all round best for me.
Ok after some extensive research I finally got it working with the latest nightly jan 20th. I wiped everything except internal.. Flashed the cm12 then zv8 radio.. Wiped cache and dalvic and it booted fine.. I then proceeded to install the appropriate gapps..
kemroy said:
Ok after some extensive research I finally got it working with the latest nightly jan 20th. I wiped everything except internal.. Flashed the cm12 then zv8 radio.. Wiped cache and dalvic and it booted fine.. I then proceeded to install the appropriate gapps..
Click to expand...
Click to collapse
Sooo- I'm no developer but I can tell you what worked for me. We're starting from different working roms and, except maybe for the recovery, can't imagine this matters. I am on stock ZVE, Dorimanx bumped kernel V9.55KK and bumped TWRP 2.8.3.1
1. nandroid backup and modem backup
2. wipe standard wipe and system
3. flash ZV8 radio from here- http://downloads.codefi.re/autoprime/LG/LG_G2/G2_modems
4. wipe dalvik
5. flash CM nightly (works with 20150120 didn't try older ones)
6. wipe dalvik and reboot
Probably a couple of extra wipes in there but can't hurt. Hope this works for you.
I expect good things from this rom- Shelnutt2 always did a nice things for the Optimus G my last phone.
Thank you
Just wanted to start of saying thanks to @Shelnutt2 for posting up the thread. I'm not sure if you are just going keep the thread up as a place for discussion around the official build for our device OR the CM maintainer that pulled the lucky LS980 number, but either way, thanks!
I came from the December 26th dated alpha build that @Rashed97 did for all the G2 variants and it ran good, few things here and there, but it had been my daily driver since Dec 28th and I've been happy since then. Was apprehensive about flashing the nightly builds because it's usually a regression at first BUT I have to say, so far, so good. My good friend and teammate @thoughtlesskyle and his themes pushed me over the edge, I just had to get the Theme Engine so I could try them on my own device so here I am, on CM12 Official nightly 20150128 and love using the THEMES! :good::good:
All, CM's built in SU control doesn't play nice with Titanium Backup AT ALL (ie, your apps will not restore) so you'll need to either just install SuperSU from the Play Store and update binaries as OR flash it when you flash rom.
Things that did not work in the Unofficial CM12 build that I noticed myself were:
1. No SIM Card warning on lock screen
2. CM Messenger app *send button did not work so app was useless
2a. MMS were not able to be received (not even through Google Messenger app)
3. GPS (well, not like that really worked on stock anyway.....
4. Sometimes system volume would just go to zero requiring reboot to restore
5. VERY hard to get the device to connect to Spark B41 networks (but had SOLID B25/B26 performance)
5a. Mobile networks setting would change on it's on
6. Theme Engine missing
7. Speaker phone didn't work, would turn sound from caller/video chat into very garbled unrecognizable output
8. NFC was SOOOO broken that it required manually deleting the NFC folder from system to keep from 100% wakelock
9. I'm sure other odds and ends but all in all, no show stoppers and I've been quite impressed with the CM12 start for our device
Now, I'm about 1hr fresh on the official build and can confirm that of my list 9 items from unofficial, 2a and 6 are fixed. I'll update as I spend more time with the rom but I'm looking forward to more good things here.
Finding Lollipop for my phone thoroughly made my day. Truly. Thousands of thanks to shel and whomever else got this here.
Flashed 1/28 clean with ZV8 radios via TWRP 2.7.0.0. Way quicker and better-looking and -feeling than stock.
GPS , MMS (with Google Messenger) and speaker work for me.
I've had no trouble with the built-in SU (I dig it), but I restore with ROM Toolbox Pro, not Titanium.
Send button on stock Messaging doesn't work for me either.
It does read "No SIM card - Sprint" on lock screen (as well as during the CM setup process).
Bluetooth works, but texts cannot be read by my car (as they could with stock and most, if not all ROMS on my N5).
Haven't touched NFC. Cheers and thanks again.
If you want the remote from lg, here is the thread for the remote to work on AOSP.
http://forum.xda-developers.com/showthread.php?t=2929146
I've been using it in resurrection ROM for a while now. Since it is from the g3, it has a newer look.
I may come back to cm12, but haven't taken the dive yet.
May wait to see what else Mr Rogers finds. I know cm messenger has been unable to send since the beginning of alphas. Would think they could get that fixed. Also, for a limited data guy, not being able to shut off sprint data has been a issue for me.
Especially since I've heard d802, can shut their off with the toggle.
Looks like using any system profile mutes notifications. Can't get 'em to come back without a reboot.
I'm on the 26th version and just about everything seems to work fine. Sending messages works, sim shows up fine (using consumer cellular [att]), etc. Only thing that I'm curious about is UMS (usb mass storage). My car will not read an mtp device but did read usb mass storage when I was using my motorola atrix (using its internal sdcard, no external card required). Anybody know how to make it work in this rom or should I give that tmobile kk rom a shot (not sure how well it'd work on att)?
ihitcows said:
GPS ... work for me.
Click to expand...
Click to collapse
Scratch that. GPS isn't working. It can locate me when I'm connected to Wi-Fi, but not otherwise.
Screen is stuck in portrait orientation.
I can't get back to my stock backup. Same thing happened on my LG Optimus G: can't get back to AOSP without a total format.
i apologize for posting here, but i came across this thread looking for cyanogenmod 12 for d803. I saw on github you are a contributor. So, i was wondering that if it was even remotely possible for you to build d803? i know it could be a hassle for you thank you for your hard work in building for the beloved g2.
zr239 said:
i apologize for posting here, but i came across this thread looking for cyanogenmod 12 for d803. I saw on github you are a contributor. So, i was wondering that if it was even remotely possible for you to build d803? i know it could be a hassle for you thank you for your hard work in building for the beloved g2.
Click to expand...
Click to collapse
Maybe delete this message and send a PM?
ihitcows said:
Screen is stuck in portrait orientation.
Click to expand...
Click to collapse
Got it. Had to clean-flash 2/1 to get screen rotation working, though.
Tried wiping caches and flashing 1/28, then wiping caches and system. Neither worked.
Still, I'm the happiest camper I've been since I've had the G2.