Develop Bugs

[Guide]To UnBrick (a Soft Brick) SGS GT-I9000

Hey Users
I wanted to create this guide as I'm seeing allot of SGS users bricking there phone..This guide works for SGS GT-I9000 only..
ALSO USE THIS GUIDE IF AND ONLY IF U SEE THE FOLLOWING IMAGE WHNE BOOTING YOUR PHONE(attached image:1)
Downloads:
1. Odin3_v1.00 download here
2.The PIT file here
3.USB Drivers form here(This Is Optional if it is already installed by your phone, else you need to download it and install it)
Steps:
1.Run Odin3
2.Select "pit" and add the pit file u downloaded
3.Put ur SGS to download mode
--Do so by Pressing the 3 button combo Volume Down+Home(Center) Button+Power button
--Hold it till you see the Download screen(attached image:3)
Then go back to odin and see if your phone is connected (attached image:2)
Make sure re-partition is un-checked
Hit the Start button and wait..it'll unbrick your phone and load the previous Fimrware/Rom...
Enjoy
- - - - - - - - - - - -
Hit the Thanks Button if my thread helped...

yes,that's a soft brick.

Haha I was being stupid and repartitioned my phone and flashed the new stock rom every time that happened. Thanks man!
Sent from my GT-I9000

senotrius said:
yes,that's a soft brick.
Click to expand...
Click to collapse
+1
This will not solve anything if u cant get into download mode, and usually if your phone is bricked then u cant access download mode, so your thread should be called how to fix your phone when its soft bricked

you sir, are a gentleman and a scholar!!!! Got my dad's phone back from the black-screen-of-death.
That pit file saved my life, otherwise i would of had one angry Dad, lol.
Thank you!!

Way better than flashing Darky 10.2 RE every single time like I did. Thanks I'll try it as i get a softbrick frequently.

I hate to be that guy, but this "guide" is somewhat incomplete and misleading:
first of all the very first and important step is making sure one has installed the appropriate drivers and that the OS recognizes the phone through DL mode, otherwise Odin will suck on "setting up connection" (this is the most common cause for soft brick during flashing)!
second: if there's no re-partition, there's no need for pit neither, because that's exactly it's used for: it contains the partition table structure layout for the official firmwares.

What if i cant enter download mode even with a usb jig??
Sent from my GT-I9000 using xda app-developers app

gevamran said:
What if i cant enter download mode even with a usb jig??
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
garbage.
Sent from my GT-I9000 using xda app-developers app

gevamran said:
What if i cant enter download mode even with a usb jig??
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Then it's JTAG time! maybe it's still salvageable!
Tapatalked from TsunamICS

gevamran said:
What if i cant enter download mode even with a usb jig??
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showthread.php?t=1153310
@tchindalia: your odin is really old https://dl.dropbox.com/u/16395058/Odin3 V1.85.zip

( V ) said:
Then it's JTAG time! maybe it's still salvageable!
Tapatalked from TsunamICS
Click to expand...
Click to collapse
I solved it by a strange way! I put the usb jig and just the screen showed the phone and computer with that sign then i attached phone to computer and i opened Odin and it showed "added!" I was shocked!! I installed the software while it was on that screen! And it works so great! Wish it can help anybody
Sent from my GT-I9000 using xda app-developers app

plz help
my samsung galaxy s gt i9000 had the korean software i tried to root it fro CF root. after that it wont turning on....it showd a weaired screen with various colors.. finally i managed to go to odin and upgraded to gingerbread i worked fine....
but....
phone unknown no imie ,base band unknown, wont detect sim card , no sounds and home button doset work plz any one can help me to fix this.....plz frens......(some of them say its a type of soft brick,so plz ,how can i fix it)

tchindalia said:
Hit the Start button and wait..it'll unbrick your phone and load the previous Fimrware/Rom...
Click to expand...
Click to collapse
Definitely NOT true!

[Recovery] [Unofficial] CWM RECOVERY 5.0.2.8 for KARBONN A7+

Finally I have compiled a FULLY WORKING CWM RECOVERY 5.0.2.8 for KARBONN A7+
Its easy to flash too .
Make sure you have installed all drivers for your phone and USB DEBUGGING is enabled
Steps to flash the CWM Recovery :-
1. Download the zip from here or here
2. Extract the zip in a folder.
3. Run CWM Recovery.bat and follow the simple steps :good:
4. Use the key combination to enter recovery
Known Bugs :
ALL SOLVED BY ME
Thanks to : 1. I, me and Myself for taking the initiative and trying
2. sinnerz2000 for the files and be the 1st one for testing
3. Cyanogen-mod for the sources

Eklovya said:
Finally I have compiled a CWM RECOVERY 5.0.2.8 for KARBONN A7+
Its easy to flash too .
Make sure you have installed all drivers for your phone and USB DEBUGGING is enabled
Steps to flash the CWM Recovery :-
1. Download the zip from here
2. Extract the zip in a folder.
3. Run CWM Recovery.bat and follow the simple steps :good:
4. Use the key combination to enter recovery
Known Bugs :
You tell me as I don't have KARBONN A7+
What's working?
You tell me as I don't have KARBONN A7+:good:
Thanks to : 1. I, me and Myself for taking the initiative and trying
2. sinnerz2000 for the files
3. Cyanogemod for the sources
Click to expand...
Click to collapse
I will try it
Sent from my A7+ using xda app-developers app

Eklovya said:
Finally I have compiled a CWM RECOVERY 5.0.2.8 for KARBONN A7+
Its easy to flash too .
Make sure you have installed all drivers for your phone and USB DEBUGGING is enabled
Steps to flash the CWM Recovery :-
1. Download the zip from here
2. Extract the zip in a folder.
3. Run CWM Recovery.bat and follow the simple steps :good:
4. Use the key combination to enter recovery
Known Bugs :
You tell me as I don't have KARBONN A7+
What's working?
You tell me as I don't have KARBONN A7+:good:
Thanks to : 1. I, me and Myself for taking the initiative and trying
2. sinnerz2000 for the files
3. Cyanogemod for the sources
Click to expand...
Click to collapse
Its not working bro, the cmw screen is opening up but if we select anything the options are disappearing and only the background image is visible. But good thing at least its working so far
Sent from my A7+ using xda app-developers app

sinnerz2000 said:
Its not working bro, the cmw screen is opening up but if we select anything the options are disappearing and only the background image is visible. But good thing at least its working so far
Sent from my A7+ using xda app-developers app
Click to expand...
Click to collapse
I have compiled one for my phone
Same problem in that also.
Will provide you new in some time
Sent from my LG-P725 using xda premium

Alright, msg me on gtalk wen u post it
Sent from my A7+ using xda app-developers app

sinnerz2000 said:
Alright, msg me on gtalk wen u post it
Sent from my A7+ using xda app-developers app
Click to expand...
Click to collapse
Hi sinnerz2000, I think it has been posted (as the OP says all bugs solved). Can you please check if it works? I want to make a story on this on my website.
P.S. I shall give credits to you for testing this out

droidiser said:
Hi sinnerz2000, I think it has been posted (as the OP says all bugs solved). Can you please check if it works? I want to make a story on this on my website.
P.S. I shall give credits to you for testing this out
Click to expand...
Click to collapse
Its all solved.
We worked on that after his post.
And all solved.
And i am the hero of the story.
He he.
Sent from my LG-P725 using xda premium

droidiser said:
Hi sinnerz2000, I think it has been posted (as the OP says all bugs solved). Can you please check if it works? I want to make a story on this on my website.
P.S. I shall give credits to you for testing this out
Click to expand...
Click to collapse
Yea its working fine nd yea you can put it up on your site ill update the karbonn a7+ development thread page with the recovery link too so you can put up that page link cos all development progress will be updated on that page.
Sent from my A7+

Thanks guyz
Thanks to Eklovya n Sinnerz :good:

Thanks

plz help
i am doing every step u told but still i am not able to install it,it says waiting for device.....
i have installed updates of a7 on my a7+ and now it says mobistar so is it problem please give me solution
the problem is with adb drivers when i connect the phone in fast boot mode it does not install drivers,but in recovery or normal mode it does get installed properly,so what can be a problem????plz help

akshayh said:
i am doing every step u told but still i am not able to install it,it says waiting for device.....
i have installed updates of a7 on my a7+ and now it says mobistar so is it problem please give me solution
the problem is with adb drivers when i connect the phone in fast boot mode it does not install drivers,but in recovery or normal mode it does get installed properly,so what can be a problem????plz help
Click to expand...
Click to collapse
Install pdaNet. That's how I got the drivers.

akshayh said:
i am doing every step u told but still i am not able to install it,it says waiting for device.....
i have installed updates of a7 on my a7+ and now it says mobistar so is it problem please give me solution
the problem is with adb drivers when i connect the phone in fast boot mode it does not install drivers,but in recovery or normal mode it does get installed properly,so what can be a problem????plz help
Click to expand...
Click to collapse
Dwnld a7's drivers or dwnld moborobo it will automatically install drivers
Thanks
Sent from my A7+ using xda premium

vinayakmt said:
Install pdaNet. That's how I got the drivers.
Click to expand...
Click to collapse
dude thanz a lot it worked fine.....

How to remove cwm in case of warranty?

tariq2kn said:
How to remove cwm in case of warranty?
Click to expand...
Click to collapse
Don't post ur question in all topics, have paitience
Sent from my Mobiistar S01 using xda app-developers app

tariq2kn said:
How to remove cwm in case of warranty?
Click to expand...
Click to collapse
Dwnld stock recovery given by me
http://www.mediafire.com/?3d7g6w7buu8fpg1

tariq2kn said:
How to remove cwm in case of warranty?
Click to expand...
Click to collapse
Flash stock recovery via adb
its simple
look for some videos on "how to flash recovery" on youtube.
If and only if you have the stock recovery.img file

aesvlib words
ankit99 said:
Dwnld a7's drivers or dwnld moborobo it will automatically install drivers
Thanks
Sent from my A7+ using xda premium
Click to expand...
Click to collapse
installed moborobo but still show waiting for device
any help plz

Try pdanet
Sent from my A7+ using xda app-developers app

How to unbircking your Galaxy W GT-i8150 (100%working)

What U Need :
1.ClockWorkMod 6.0.1.0++
2.rooted device
Steps :
1.If your device brick , Go to "ClockWorkMod" (Press Power , Volume up and Home button)
2.Go to Mount And Storage , and choose the "USB Storage "
3. Now Connected Your Galaxy W to the computer , and The computer will detect the Galaxy W sdcard
4. Go this links and download a rom for your galaxy w (Search it on Google and type Galaxy W rom !!!)
5. After download , copy your downloaded file into Sd card( Into "My Computer " there ) and Flash it !!!!
6. Now your phone should be boot now
7. And don't forget to click "Thx Meter "
So I am a new from here , if anyone got any question about unbricking your device . Answer below

nomorehomework said:
What U Need :
1.ClockWorkMod 6.0.1.0++
2.rooted device
Steps :
1.If your device brick , Go to "ClockWorkMod" (Press Power , Volume up and Home button)
2.Go to Mount And Storage , and choose the "USB Storage "
3. Now Connected Your Galaxy W to the computer , and The computer will detect the Galaxy W sdcard
4. Go this links and download a rom for your galaxy w (Search it on Google and type Galaxy W rom !!!)
5. After download , copy your downloaded file into Sd card( Into "My Computer " there ) and Flash it !!!!
6. Now your phone should be boot now
7. And don't forget to click "Thx Meter "
So I am a new from here , if anyone got any question about unbricking your device . Answer below
Click to expand...
Click to collapse
Please edit that its for softbrick
Sent from my GT-I8150 using xda app-developers app

em..if im not mistaken this already being posted b4?

This is just soft-unbricking, its been posted how.
And most of the time this doesn't even solve any issue.

Can u give me the links who already post the this title again.. but soon I will suggest u all the mod for galaxy w
Sent from my GT-I8150 using xda app-developers app

Your title suggests to how to unbrick a hardbricked SGW, but what you are describing is a simple flashing after your ROM rendered to be not booting. This happened already to many of us who tested many ROMs forth and back and has been discussed in many threats, so it´s not new.
This can be done with CWM or even with Odin if you can´t access CWM recovery but only the download mode.
But what we would need is a solution for a hardbricked SGW.

nomorehomework said:
Can u give me the links who already post the this title again.. but soon I will suggest u all the mod for galaxy w
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
mayb u can search the thread..it didnt hv the same title but the content is the same.same goes for the mod u r about to post.im not sure if there's a post compiling all the mods in one thread.if there isn't,all of us would be thankful if u make one.

THIS is working to me. That time I mistaken delete some system file, after reboot my device I am stuck on SGW logo there. After I using this steps, my phone works again: D
Sent from my GT-I8150 using xda app-developers app

is this for hardbrick or softbrick?
if this is softbrick, just get into cwm and install a rom..if this is a hardbrick or your phone cant turn on how can you manage to go to cwm with a dead phone??hfftt..
some advice : use jig(if you have one) or go to ssc..
Sent from my GT-I8150 using xda app

Ya but if u delete the file (like cm9.zip) before u brick your device. How can u get back to the normal phone?!?!?
Sent from my GT-I8150 using xda app-developers app

nomorehomework said:
Ya but if u delete the file (like cm9.zip) before u brick your device. How can u get back to the normal phone?!?!?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
so this is softbrick..
its simple..just copy the .zip file again into your microsd card..go to cwm and install the .zip file..just like that..
edit : just go to ssc if your phone cannot power on.
Sent from my GT-I8150 using xda premium

This isn't for hardbrick nor soft its just reinstalling a broken mod, use the search button b4 you post mate.

Mr.TwEaK said:
This isn't for hardbrick nor soft its just reinstalling a broken mod, use the search button b4 you post mate.
Click to expand...
Click to collapse
better change the topic subject then..
Sent from my GT-I8150 using xda premium

Mr.TwEaK said:
This isn't for hardbrick nor soft its just reinstalling a broken mod, use the search button b4 you post mate.
Click to expand...
Click to collapse
Exactly. I would say a softbrick is when nothing works (even not CWM recovery) exept the download mode. Then you still can unbrick it by flashing the rom via Odin.
This happened to me once. Not a big deal, but a bit risky if something goes wrong while Odin is flashing the rom.
A hardbrick is when even the display doesn´t work and you are even not able to access the download mode. In some cases it´s still possible to unbrick it via Odin by entering the Download Mode with a trick or by doing it "blind".
There is for example a resistor+usb plug solution to enter the download mode in such a cese. Not sure it works with our SGW too, but it works with most Samsung devices.
stpdkid said:
better change the topic subject then..
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
That was also my intent in my earlier post, because the described procedure has nothing to do with unbricking the phone. It only describes a way how to reflash a rom.

nomorehomework said:
Ya but if u delete the file (like cm9.zip) before u brick your device. How can u get back to the normal phone?!?!?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
That's why you have to make a nandroid backup
Sent from my GT-I8150 using xda app-developers app

There is for example a resistor+usb plug solution to enter the download mode in such a cese. Not sure it works with our SGW too, but it works with most Samsung devices.
Click to expand...
Click to collapse
Yes it does I got one from Ebay (cheap) and it works it looks like magic to me.

Its just softbrick not hardbrick
Sent from my GT-P5100 using xda premium

leelogi seven
please change the title to softbrick galaxy w :good:

We call hardbrick if there is no Download mode and Recovery Mode (Clockworkmod).

Title wrong spelling. And please change it to soft brick, everyone knows about this procedure. What we need is hard brick solution.

[Q] Need help...

So i downloaded this xperia theme everything is changed but it really ****ed everything up.. Now i want my normal theme back like back in the day i baugth it.. Can u guys tell me how please T__T?? My mom is gonna kill me is she sees this.. The reason why i want the old theme back is i cant use this code on the theme that i have now. The code is : *#7284# when i dial the code it does nothing so i really want the old theme back so i can use the code again please guys helppp.!!!!

Unknownx09 said:
So i downloaded this xperia theme everything is changed but it really ****ed everything up.. Now i want my normal theme back like back in the day i baugth it.. Can u guys tell me how please T__T?? My mom is gonna kill me is she sees this.. The reason why i want the old theme back is i cant use this code on the theme that i have now. The code is : *#7284# when i dial the code it does nothing so i really want the old theme back so i can use the code again please guys helppp.!!!!
Click to expand...
Click to collapse
1. Do you have CWM?
2. If so, do you have a backup?
3. Do you have root?
4. Where did you download the Xperia theme your talking about?
5. What does the *#7284# do?
6. Have you ever used ODIN?
7. Do you have stock ROM or a custom one (like Enhanced236)?
Regards,
X-Zone

if you have backup restore it ....but if not you need flashtool and stockrom to get everything back to normal .....and if it is just theme try to factory reset your phone!!!:fingers-crossed:
-------------------------------------
don't know much about here but know how to help people :highfive:

X-zone said:
1. Do you have CWM?
2. If so, do you have a backup?
3. Do you have root?
4. Where did you download the Xperia theme your talking about?
5. What does the *#7284# do?
6. Have you ever used ODIN?
7. Do you have stock ROM or a custom one (like Enhanced236)?
Regards,
X-Zone
Click to expand...
Click to collapse
I never did any of those... And the code is something to unlock my phone with here are the instructions : and it was like almost a year ago i got this theme i dont know anymore where i got it..
1. Please ensure that battery of phone is fully charged.
2. Turn your phone on without simcard.
3. On keypad of your phone type *#7284# and Select MODEM option at the USB section.
4a. For 2.x.x Android : In "Setting - > Applications -> Development" select "USB Debugging".
4b. For 4.0.x Android : In "Settings - > { } Developer options" select "USB Debugging".
4c. For 4.1.x Android : In "Settings - > { } Developer options" enable it and than select "USB Debugging".
5. Plug your phone to the computer via USB and wait until all drivers are installed.
6. Unplug the USB cable, wait 10 seconds and plug it back to your phone.
7. Click "Next" button.

sauravrockable said:
if you have backup restore it ....but if not you need flashtool and stockrom to get everything back to normal .....and if it is just theme try to factory reset your phone!!!:fingers-crossed:
-------------------------------------
don't know much about here but know how to help people :highfive:
Click to expand...
Click to collapse
Does not work.. with theme i mean EVERYTHING is changed like having a new mobile... please tell me how to use flashtool and stockrom i really want everything back to normal.. Please help me guys T__T..

Unknownx09 said:
I never did any of those... And the code is something to unlock my phone with here are the instructions :
1. Please ensure that battery of phone is fully charged.
2. Turn your phone on without simcard.
3. On keypad of your phone type *#7284# and Select MODEM option at the USB section.
4a. For 2.x.x Android : In "Setting - > Applications -> Development" select "USB Debugging".
4b. For 4.0.x Android : In "Settings - > { } Developer options" select "USB Debugging".
4c. For 4.1.x Android : In "Settings - > { } Developer options" enable it and than select "USB Debugging".
5. Plug your phone to the computer via USB and wait until all drivers are installed.
6. Unplug the USB cable, wait 10 seconds and plug it back to your phone.
7. Click "Next" button.
Click to expand...
Click to collapse
As sauravrockable said, try factoryreset your phone. And again, 4. Where did you download the Xperia theme you were talking about?
Note. Playing around with roms, mods and themes can be "dangerous", at least when you are a noob. Please be more careful next time.
EDIT: Do you know how you factory reset your phone?

X-zone said:
As sauravrockable said, try factoryreset your phone. And again, 4. Where did you download the Xperia theme you were talking about?
Note. Playing around with roms, mods and themes can be "dangerous", at least when you are a noob. Please be more careful next time.
EDIT: Do you know how you factory reset your phone?
Click to expand...
Click to collapse
Allready tried it and yes im a stupid noob who doesn't even know what he is doing. And factory reset did not work. Its a xperia theme here is all the information i know :
1. Baseband version : S5660XXKPA
2. Kernel version : 2.6.37.6_DelanoKernel, [email protected]_dev-laptop#1
3. Build number : XperiaTized
I think this one is it not sure it was a long time ago.. : http://forum.xda-developers.com/showthread.php?t=1491787

Here you go http://m.youtube.com/watch?v=hPPWRXcsz7g&desktop_uri=/watch?v=hPPWRXcsz7g
And follow instructions carefully also make backup for all the contacts, music etc. you can make it with mobile go
Requirements: time, net speed, and most important.... brain
But also I am pretty sure that will be some other way to make your phone back to normal but I only know this way...
You could ask a senior member.
Don't forget to press thanks
Sent from my ST25i using xda app-developers app

sauravrockable said:
Here you go http://m.youtube.com/watch?v=hPPWRXcsz7g&desktop_uri=/watch?v=hPPWRXcsz7g
And follow instructions carefully also make backup for all the contacts, music etc. you can make it with mobile go
Requirements: time, net speed, and most important.... brain
But also I am pretty sure that will be some other way to make your phone back to normal but I only know this way...
You could ask a senior member.
Don't forget to press thanks
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
What version i need?? ST25, MT27 and all that?? wtf this really looks hard..

Which phone you are using?
Sent from my ST25i using xda app-developers app

sauravrockable said:
Which phone you are using?
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Samsung Galaxy Gio GT-S5660. Its posted in the Galaxy Gio GT-S5660 Q&A forum so..

Unknownx09wnx09 said:
What version i need?? ST25, MT27 and all that?? wtf this really looks hard..
Click to expand...
Click to collapse
sauravrockable said:
Which phone you are using?
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
That's for the wrong phone. This is a Samsung galaxy gio forum!
You need to flash your phone with the stock rom with Odin.
Sent from my GT-S5660

X-zone said:
That's for the wrong phone. This is a Samsung galaxy gio forum!
You need to flash your phone with the stock rom with Odin.
Sent from my GT-S5660
Click to expand...
Click to collapse
Any tutorial any step to step guide please man..

Unknownx09 said:
Any tutorial any step to step guide please man..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=20397915
Sent from my GT-S5660

X-zone said:
http://forum.xda-developers.com/showthread.php?p=20397915
Sent from my GT-S5660
Click to expand...
Click to collapse
I dont see stock room with odin???
I need to do this one?
For Single package .tar file follow this
Download ODIN 4.42
NOTE: Always do a fectory reset before and after flashing to avoid glitches.
1. Extract and Run Samsung S5660 Galaxy Gio ODIN 4.42 Downloader on your Desktop
2. Open ODIN and Click OPS button and select and load: Gio_v1.0.ops
3. click on Single package On ODIN
4. Now click on last option single package and locate the single .tar file
5. Turn the Samsung Galaxy Gio into Download mode by pressing ( Volume Down + OK + Power ) together.
6. Connect Cable phone to pc Make sure that the program detect the phone.
7. Click Start button if all set and ready,and wait until the program will finished downloading files. A word PASS! will appear if the flashing successfully completes.
The phone will then reboot,you can check and confirm the newly downloaded firmware version by typing *#1234# and then do a full reset by typing this Code *2767*3855#
-------------------------------------------------------------------------------------------------------------------------

Unknownx09 said:
I dont see stock room with odin???
Click to expand...
Click to collapse
forum.xda-developers.com/showpost.php?p=16979769&postcount=547
Don't forget to click on the thanks button!
Sent from my GT-S5660

X-zone said:
forum.xda-developers.com/showpost.php?p=16979769&postcount=547
Don't forget to click on the thanks button!
Sent from my GT-S5660
Click to expand...
Click to collapse
I click the thanks button a thousand time IF it works.. So i need to put this in my mobile and install it in recovery mode???

Unknownx09 said:
I click the thanks button a thousand time IF it works.. So i need to put this in my mobile and install it in recovery mode???
Click to expand...
Click to collapse
No, follow the instructions. You need a pc.
Sent from my GT-S5660

X-zone said:
No, follow the instructions. You need a pc.
Sent from my GT-S5660
Click to expand...
Click to collapse
I have android 2.3.6 and most of the link were removed anyway. Anymore guides man D:???

Unknownx09 said:
I have android 2.3.6 and most of the link were removed anyway. Anymore guides man D:???
Click to expand...
Click to collapse
http://bit.ly/18WpoNo

[RECOVERY] CWMR for Micromax A91

Full tutorials for Installing CWMR 6.0.2.8 in your Micromax A91
Click to expand...
Click to collapse
SP Flash Tool method, root not required
Click to expand...
Click to collapse
1. Download MTK6577 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download CWMR 6.0.2.8 + scatter.zip and SP_Flash_Tool unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted CWMR 6.0.2.8 + scatter folder and select MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Click to expand...
Click to collapse
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
To revert back to stock recovery.... download Stock Recovery.zip and repeat the same steps again.
Click to expand...
Click to collapse
STOCK FIRMWARE FOR GETTING THE WARRANTY BACK ON MICROMAX A91​
Click to expand...
Click to collapse
CREDITS​
DR_MOOSAVI for SPFlashTool (ofcoarse!!!)
Forever Alone for Stock Firmware​
Click to expand...
Click to collapse

may i ask a question???
Is the stock rom is working???

Yes....
Alex Thunder said:
Is the stock rom is working???
Click to expand...
Click to collapse
yes stock rom is working. flash it via spflashtool... use this:good:

sorry screen shots please!!!
droid man said:
yes stock rom is working. flash it via spflashtool... use this:good:
Click to expand...
Click to collapse
first of all,thank you so much sir for your quick response.it works and now my phone is working properly its all because of u.sir if possible please upload ur 4.2.2 rom also.
thank u once again

My own ROM is undr testing as it contains many bugs (ofcourse) as soon as bugs are fixed i will upload it nd dont say thanx tap thanx
sent using my micromax A91 android 4.2 custom my own rom +many more tweaks using XDA Premium

droid man said:
My own ROM is undr testing as it contains many bugs (ofcourse) as soon as bugs are fixed i will upload it nd dont say thanx tap thanx
sent using my micromax A91 android 4.2 custom my own rom +many more tweaks using XDA Premium
Click to expand...
Click to collapse
once again a very quick resspons,thanks and i'm also tapping thanks.
i'll wait for that rom...

A new GUIDE
Alex Thunder said:
A new Guide jst For u
Click to expand...
Click to collapse
You can Increase the Internal Memory Using THIS guide.

droid man said:
You can Increase the Internal Memory Using THIS guide.
Click to expand...
Click to collapse
is this safe??

Alex Thunder said:
is this safe??
Click to expand...
Click to collapse
Yes u can use this it is 100% safe.... sry for late rply

I downloaded CWMR for micromax ninja A91 but when i try to flash it via sp flash tool it shows recovery is checked but without path plz help
Sent from my Micromax A91 using xda app-developers app

Kevin Koli said:
I downloaded CWMR for micromax ninja A91 but when i try to flash it via sp flash tool it shows recovery is checked but without path plz help
Sent from my Micromax A91 using xda app-developers app
Click to expand...
Click to collapse
Check that the path provided for recovery.img file is correct...also u can try by putting scatter loading gile in the same folder as it is for recovery...
sent using my micromax A91 android 4.2 custom my own rom +many more tweaks using XDA Premium

When i load the scattering file of CWM it shows recovery is checked but no path is checked. And can you give recovery.img of CWM so that i can flash it Via Mobile uncle tools
Sent from my Micromax A91 using xda app-developers app