[Q] Variety of strange screen issues occuring - AT&T Samsung Galaxy Note II

Apologies if this has been addressed before, but I searched and couldn't find something exactly like this...
Randomly one of 3 screen issues seems to be occuring on a daily basis:
1) Auto-Rotate stops working. Cannot get screen to rotate without reset (Yes, I've made sure auto-rotate is on in settings)
2) Screen will not Auto-Off. Even if I change settings to 15 secs, screen will not turn itself off. I have to manually turn it off. And, if I receive a text or any kind of notification it will light up again and stay on indefinitely.
3) Screen will not turn back on when trying to wake up device. Hitting the home button and power button both have no effect. Although the LED is usually blinking, and it seems the phone is still on.
For all 3 of the above issues, manually pulling out the battery and reseting the phone that way seems to always work. But, this is an annoying process to have to go through on a daily basis.
Also, I've noticed that these 3 symptoms don't occur simultaneously. For example, yesterday it wouldn't auto-off, but rotation would still work.
Not running any custom ROMs either

Related

HTC TP2 issue: Whenever backlight comes on - on dim, then off, then on full.

I've had this issue with five different ROMs including the stock HTC ROM. It doesn't do it when the ROM is flashed freshly but starts within an hour or so, regardless of whether I load any other software on.
Here's exactly what happens. It doesn't matter if the unit is in standby or if the proximity sensor is activated. (On a phone call with phone by head - backlight is disabled.)
When the backlight is off and is activated by either pressing the power button or moving the phone away from the head, the backlight comes on dim, then goes off, then turns back on at regular brightness. The delay between activating the backlight and reaching regular brightness is around one second.
What is going on? This is really annoying. If I'm on a call and want to mute the mic, I take the phone away and "flash, flash, mute". Then I want to unmute and the same thing.
I don't have any software on the phone right now that most of the rest of you don't have. I've got:
AT&T keyboard fix
Dusk lockscreen
PHM Regedit
Safe Inbox Extender
Clock flip disable
1% battery driver
Theme pack for 1% battery icons
I've reflashed and installed none of this software and the issue doesn't occur. Without installing any software, the issue recurs within a day. (Usually within an hour)
Any help or insight would be appreciated.

Possible SOD issue...

Hey guys so my Tilt 2 has been having an issue when I put it to sleep. It goes to sleep fine, but when I wake it up the screen remains black. The actual device turns on, but the screen stays black. I can still make calls, receive calls, play music, etc. but I have to soft reset the device if I want to be able to see what I am doing.
From what I can tell my problem is different from the normal Sleep of Death issue where the device simply won't wake up.
I've searched through the forums looking for solutions and have tried pretty much everything from doing a hard reset, using different roms, formatting the internal memory, etc. Even after doing all of this, my device still suffers from this issue.
Any insight into my problem would be greatly appreciated!
I assume you've tried a simple reset using the reset button or pulling the battery out and putting it back in?
Aaron McCarthy said:
I assume you've tried a simple reset using the reset button or pulling the battery out and putting it back in?
Click to expand...
Click to collapse
Yeah every time I the screen goes black I soft reset it in order to get the screen to turn back on. The problem is that the issue persists through soft resets. I currently can't suspend my device because I can't get the screen to turn back on...
hold down the volume down button and then press the reset button (the physical reset button) this should bring you into your bootscreen the multicoloured screen.. if you can get there then you can flash a new rom on your phone... and thats a whole other ball game. It gets a lot of hype as being hard but its really super easy to do if you just follow the directions.
Tilt 2 dark screen solved
With the tilt 2, if the screen does not wakeup, but you can answer the phone, hear music, etc..., it is a malfunctioning light sensor, maybe hardware, or software related (drivers), but it is fixable. Just eliminate all calls for use of the light sensor.
I had this problem and took quite a while to figure it out, as there are several apps that poll the light sensor that cause problems.
First, go to start/settings/system/power/backlight and uncheck the auto adjust backlight option
Second, go to start/settings/personal/buttons/backlight and uncheck the enable keyboard auto backlight sensor.
Last, open advanced config (need to download and install from touchxperience.com, if you do not have it), tab to light sensor and set light sensor polling to disabled.
Now, my phone works normal and will wake up properly from standby like it should. this all seems hardware dependant, as I have in my family 3 of these things and I dropped and broke mine, so bought a new one (4th in the series) and it had the SOD issues, but could restart with softrest. Took me the better part of the day to find a reliable fix, but now all is well again.
Hope this helps other Tilt 2 and similar issues.

BUG: screen lock does not kick in

first i thought it was launcher pro's fault, but after changing launcher and rom release i'm pretty sure it's something else i haven't tracked down yet.
just after a reboot phone works as usual: screen lock runs after 30 seconds or by clicking the power button
after a while (days or even hours sometimes), the screen lock does not kick-in anymore: the screen just turns off and when you press the power button the phone is already unlocked.
i noticed that when the phone is in this "lock-bug" mode the notification led constantly shows a faint red light (you can barely notice it in the dark because it's really faint).
tested with:
launcher pro
go launcher
factory rom 2.21
blurless 2.34
I used to have the faint red light on after flashing a new rom.
It disapeared after I changed display setting to not automatic brightness.
It seems that the faint red light is the light sensor.
But I know nothing about your screen lock problem.
I have run into the same thing. I have not yet noticed the light, but I've had the screen lock stop working on my phone twice (I bought 3 phones 5 days ago for work). Like you, a simple reboot fixed the problem. I also tried toggling screen lock in the settings, and setting up a lock code, to see if the screen lock would start up. Both of my times, the first I noticed the issue was when I received a phone call and didn't have to swipe to answer, but that could have just been coincidence.
It isn't really a big deal for me or the employees, but it is a nuisance.
Happened to me as well, twice. First time it was just annoying that I had to reboot, second time it drained the s**t out of my battery in three hours.
So it's a bug allright.
Sent from my MB525 using Tapatalk
same here.. it just stops working.. any fixes yet?

Backlight issues with CM 7.1 Stable

Anybody know any workarounds to the backlight issue with CM 7.1 stable?
It's getting pretty frustrating that I have to plug in my phone to a charger or USB slot in order to get the screen working again. I have tried previous members post about unlocking the screen when there is a black screen (performing the gesture without seeing what your doing), however this doesn't always work.
Has anyone else had any luck? It seemed as if this issue started to occur when I applied a GPS fix, but not 100% certain that is the root culprit.
This is not a permanent solution, but does help reduce the occurrences of the issue.
-Disable auto rotation
-Disable auto brightness
-Try a different lock screen. Some seem to be more pron-able than others...
I'm still having this issue too. Getting really annoying! The backlight will turn on MAYBE 50-60% of the time the first time I turn it on. The rest of the time, I have to turn the screen off and on again until the backlight comes on.

[Q] Screen randomly turns on

I seem to be having an issue with the screen turning on at random. I have Always-on screen set to ON and tilt-to-wake set to OFF, but the screen will turn on sometimes seemingly at random and multiple times in a row. I have done Factory Reset a couple of times and it does not help.
Is there anyone else with this occurance and is there a fix for it?
Sent from my VS980 4G using Tapatalk
I have this issue too. I've tried several configurations and it keeps doing it.
Sent from my SM-N910V using Tapatalk
Any apps that send a lot of notifications or any notifications that are automatically dismissed/very briefly show up? Can't think of anything else that would wake your watch.
No, not on mine.
Sent from my SM-N910V using Tapatalk
I have the exact same issue. At first I thought it was tilt-to-wake having poor gesture recognition so I turned it off. However I noticed without touching the screen it would turn on and then turn off after the stand-by time. To verify that was the case I left it sitting on my desk all day and observed that it would in fact randomly turn on and off. I also noticed that when the issue occurs the battery life decreases rapidly.
Also this issue will continue to occur even in theater mode.
Have you find a solution yet? My smartwatch 3 does the screen turn on randomly and then also touch screen issue occurs, and it makes random touches, swipes going into settings and so on, without touching the screen. I'am on the latest wear version mwd49b.
For more info search on youtube for my video about this problem: Sony SmartWatch 3 screen problem.
I recently began having the same problem. The screen does not turn off after it randomly turns on - I have to manually press the button to turn it off. Needless to say, this tend to run down the battery. I did a factory reset this morning, but the problem persists.
EDITING POST JULY 20:
After factory reset, I actually had the watch doubly connected to the phone, so I have corrected that now. However the problem with the random turn-ons began occurring well before the factory reset. I'm not sure what triggers it, or what stops it, but when it begins to happen, it drains the battery very quickly. The problem only began recently (within the past few weeks), so I'm not sure what changed to bring this on.
A bug in Android Alarm Clock keep the watch active after alarm ring. Just corrected yesterday by an update on Google Alarm/Clock app.
On the phone > android wear app > settings icon on top right > device settings (smartwatch 3) >tilt to wake set to off

Categories

Resources