Related
I was on 4.2.2 XenonHD with LeanKernel. I directly flashed Cataclysm ROM with cache, dalvik cache wipe and factory reset on GooManager. It booted flawlessly the first time. Then after completing the startup I rebooted. But then I became stuck on the google logo (surprise surprise...)
I don't get it. Why did it boot perfectly the first time but not after a reboot?
Anyway, I tried to restore my nandroid backup of the 4.2.2 XenonHD ROM. But then I got stuk at the google logo again. Why?
I haven't backed up my mediafiles (music, photo's etc) yet, in case a factory image installation is needed. I assumed I didn't need to backup those mediafiles, becuase I already have a nandroid backup, meaning I can always go back to the last ROM.
Does anybody have a solution for this? I don't care if I end up booting in 4.2.2 or 4.3, as long as I can preserve my media files.
Or do I have no other options than installing factory boot image of 4.3, meaning my files will be gone?
Thanks in advance.
No as long as you don't flash userdata.img nothing will be wiped (I think maybe to be sure you have to check twice). You can use adb pull to pull the mediafiles if you want.
Sent from my Galaxy Nexus using XDA Premium HD app
Try factory reset and then try to restore from the backup..
lastforone said:
Try factory reset and then try to restore from the backup..
Click to expand...
Click to collapse
It didn't work. I can still see my files and everything in TWRP recovery.
Rapydax said:
It didn't work. I can still see my files and everything in TWRP recovery.
Click to expand...
Click to collapse
I had Purity ROM with A.S.K.P kernel when 4.3 came out, i grabbed the zip from one of the topic in development and flashed it VIA CWMRecovery, was pretty smooth but i wanted all my setting which wasn't possible so i reverted back to Purity, this is how i did it.
Factory Reset.
Format /system
Flashed 4.3
--
Factory Reset.
Format /system, /cache, cleared Dalvik Cache as well
Flashed PurityRom 4.2
Flashed A.S.K.P Kernel
Flashed CrossBreeder Mod
Booted into OS successfully.
Restored My Apps
Click to expand...
Click to collapse
had no problem, well yeh first boot took its time to load but it did, i knew that A.S.K.P will take its time to boot for the first time so i let it be for like 4-8 mins.
Hi,
I was frustrated with the delay in T-Mobile's release of KitKat for the GSIII, so I decided to root my phone last night in order to try flashing CM11 on it. Rooted my phone with Towelroot, installed ROM Manager and CWM, and created backups on Kies and through CWM. Then I proceeded to do data wipe/factory reset, cache wipe, and /system format. Tried to flash CM11, but got a status 7 error.
I freaked out, so I decided to restore everything from the backup I'd created. Restoration seemed like a success, but now I get the error "Unfortunately, the process com.google.process.gapps has stopped" in an endless loop, and it prevents me and any apps from doing anything. I tried clearing dalvik cache in recovery, but the problem still persists. Read on a few threads that I should flash to stock firmware via Odin, but I'm currently on a macbook, so I can't install it.
tl;dr - Prepped to flash CM11, reached status 7 error, got freaked out, and did restore via CWM, only to get infinite loop of gapp crashes. No access to Odin or PC. Not hard bricked or soft bricked, but essentially useless phone. Help? );
if you can still get to recovery, download latest gapps and flash that
Did you factory reset before or after you restored your back up?
Yeah, I've tried flashing gapps--no avail.
And yeah, I did factory reset/data wipe, cache wipe, /system format 3x each before attempting to restore. Was that wrong? /:
Try to factory reset again
vvnn said:
Yeah, I've tried flashing gapps--no avail.
And yeah, I did factory reset/data wipe, cache wipe, /system format 3x each before attempting to restore. Was that wrong? /:
Click to expand...
Click to collapse
If I'm not mistaken, there is some device ID that will change each time you flash a new rom. It may be something to do with this ID not matching the one in the restored data. Purely a guess but seems logical to me.
Anyway, factory resetting will most likely solve this for you, but I wanted to add that except in certain circumstances, you shouldn't ever manually format /system. (and one format on any partition is sufficient. There shouldn't be any need to format multiple times). If you format /system, you are wiping the O/S off of your device. Then what happens if you have problems flashing a rom, or firmware? I've seen it happen many times and I often end up spending a couple of days working with them just to get the thing to boot up again!
When you flash a rom, the first thing it does is format /system. So there is just no need to do this manually. At least if the rom fails to flash (such as failing the assert checks), youll still have something to boot into. Hope this helps in the future!
I have had the exact same issue. I have a Samsung note 2 N7105. I rooted made a backup in CWM and flashed ditto n3/s5 rom made another backup in CWM. No issues. Got a bit cocky seen as it was my first time doing anything like that. My next adventure was to try a custom kernel (agni). This didn't go so well, so I tried to do a restorw to my working backup of ditto n3/s5 rom through CMW. restore went smoothly and the phone booted. once I opened the lock screen I got the gapps error as described. I had to do a factory reset to get the phone working and then re-flashed ditto n3/s3. I've since flashed other roms and when ever I try to do a restore, I get the issue described. Note I am using the latest CWM. I putting off flashing and trying any other ROMs because of this issue. I do love dn3/s5 but id love to try others. Anyone can help it would be appreciate.
I'm using an AT&T M8, BL unclocked through HTCdev, Sunshine S-OFF, SuperCID.
Yesterday, I flashed PA. Today, I decided to restore my nandroid for Viper.
I rebooted to recovery (TWRP), wiped my data, and then told it to restore my backup of Viper. Almost immediately after doing so, my phone rebooted without completing the restore. I tried then rebooting to recovery, and wiping /system before doing the restore, in the belief that it was a Sense/AOSP conflict. However, TWRP decided to reboot before I could even start the restore.
Now, I don't have an OS to boot to, and TWRP continually reboots 10-15 seconds after it boots.
I've tried updating my recovery, which was successful, but this did not seem to have an effect.
I've also tried clearing cache with fastboot, and while this was also successful, it also has not had an effect.
Has anyone seen this happen before?
Edit:
I've installed PhilZ recovery, and it no longer reboots immediately after booting to recovery. However, each time it starts, it gives a series of "E: Can't Mount /cache/recovery"...etc.
When I try to wipe data in PhilZ, it reboots again. I've tried reflashing PA, but it gave me a "E: failed to set up expected mounts for install; aborting".
OMGMatrix said:
I'm using an AT&T M8, BL unclocked through HTCdev, Sunshine S-OFF, SuperCID.
Yesterday, I flashed PA. Today, I decided to restore my nandroid for Viper.
I rebooted to recovery (TWRP), wiped my data, and then told it to restore my backup of Viper. Almost immediately after doing so, my phone rebooted without completing the restore. I tried then rebooting to recovery, and wiping /system before doing the restore, in the belief that it was a Sense/AOSP conflict. However, TWRP decided to reboot before I could even start the restore.
Now, I don't have an OS to boot to, and TWRP continually reboots 10-15 seconds after it boots.
I've tried updating my recovery, which was successful, but this did not seem to have an effect.
I've also tried clearing cache with fastboot, and while this was also successful, it also has not had an effect.
Has anyone seen this happen before?
Edit:
I've installed PhilZ recovery, and it no longer reboots immediately after booting to recovery. However, each time it starts, it gives a series of "E: Can't Mount /cache/recovery"...etc.
When I try to wipe data in PhilZ, it reboots again.
Click to expand...
Click to collapse
I don't think the recovery was "restored" / flashed to the boot partition but maybe try just in case. Flash the boot.img for Viper ROM and see if it stops the bootloop. After that you can make a clean wipe and install the ROM again, not restore but INSTALL. You surely have the ROM's .zip still?
Reason I suggested boot.img: i cannot get anything to restore with the h3g__001 backups keep getting recovery.emmc.win' is larger than target device '/dev/block/mmcblk0p42 error
mmcblk0p42 is the boot partition, so I don't know why TWRP tried to restore/flash a recovery to boot partition. He solved it by manually flashing boot.img after renaming.
if anyone gets this error heres how i solved it.change the boot.emmc.win to boot.img and it let me restore
Just a suggestion...
So this has been thoroughly confusing.
It seems that I had to clear the cache several times in PhilZ in order to resolve the first error. I tried to flash the original rom zip for Viper, but it still failed even though the "E: can't mount" messages weren't showing any more. However, I was able to re-flash the rom zip for PA, and upon booting, I found that Many of my apps were still there dispite the fact that they should have not been.
I then was able to reboot to recovery and flash the zip for Viper.
No clue what happened, but at least if anyone else has this problem, they'll be able to see how I fixed it
OMGMatrix said:
So this has been thoroughly confusing.
It seems that I had to clear the cache several times in PhilZ in order to resolve the first error. I tried to flash the original rom zip for Viper, but it still failed even though the "E: can't mount" messages weren't showing any more. However, I was able to re-flash the rom zip for PA, and upon booting, I found that Many of my apps were still there dispite the fact that they should have not been.
I then was able to reboot to recovery and flash the zip for Viper.
No clue what happened, but at least if anyone else has this problem, they'll be able to see how I fixed it
Click to expand...
Click to collapse
The apps will be there if you restored without making changes to the data partition which contains the your userdata. I've converted and changed over from International to Developer edition quite a few times now and not once in all those times did I lose my data, I just never restored the data partition.
Not sure if you have to actively choose whether to flash over data or not, I'm not that big into custom ROMs, only tried Viper ROM and even then I kept my original data.
OMGMatrix said:
I'm using an AT&T M8, BL unclocked through HTCdev, Sunshine S-OFF, SuperCID.
Yesterday, I flashed PA. Today, I decided to restore my nandroid for Viper.
I rebooted to recovery (TWRP), wiped my data, and then told it to restore my backup of Viper. Almost immediately after doing so, my phone rebooted without completing the restore. I tried then rebooting to recovery, and wiping /system before doing the restore, in the belief that it was a Sense/AOSP conflict. However, TWRP decided to reboot before I could even start the restore.
Now, I don't have an OS to boot to, and TWRP continually reboots 10-15 seconds after it boots.
I've tried updating my recovery, which was successful, but this did not seem to have an effect.
I've also tried clearing cache with fastboot, and while this was also successful, it also has not had an effect.
Has anyone seen this happen before?
Edit:
I've installed PhilZ recovery, and it no longer reboots immediately after booting to recovery. However, each time it starts, it gives a series of "E: Can't Mount /cache/recovery"...etc.
When I try to wipe data in PhilZ, it reboots again. I've tried reflashing PA, but it gave me a "E: failed to set up expected mounts for install; aborting".
Click to expand...
Click to collapse
Had that exact same issue as you. What version of twrp were you running when the issue started? Also, did you make any firmware upgrades or downgrades recently?
I ended up just running an RUU and starting over. I was able to adb pull all my files from internal sd card before i ran it.
mattprice86 said:
Had that exact same issue as you. What version of twrp were you running when the issue started? Also, did you make any firmware upgrades or downgrades recently?
Click to expand...
Click to collapse
I was using a version of TWRP that had been bundled with a previous version of Viper that was supposed to have been newer, but was actually 2.7.0.1. I updated to the newest (2.8.0.3) from the TWRP site through fastboot, but that didn't change anything. I had somewhat recently updated to the 3.xxx.xxx.7 firmware, but had flashed other roms since that without issue.
BerndM14 said:
The apps will be there if you restored without making changes to the data partition which contains the your userdata. I've converted and changed over from International to Developer edition quite a few times now and not once in all those times did I lose my data, I just never restored the data partition.
Click to expand...
Click to collapse
I did a factory reset (cache, Dalvik, data) before attempting the nandroid restore.
It looks like TWRP failed to actually do the reset in the first place, which caused it to get hung up thinking that the storage was actually being used.
OMGMatrix said:
I did a factory reset (cache, Dalvik, data) before attempting the nandroid restore.
It looks like TWRP failed to actually do the reset in the first place, which caused it to get hung up thinking that the storage was actually being used.
Click to expand...
Click to collapse
Doesn't matter mate, if you restore the data partition the backup that you made of data gets restored, period. It'll be another issue worth interest if you deselected "data" while doing the restore. As you clearly stated yourself, you did a factory reset(wipe all) BEFORE you did the nandroid restore(In which case you might have restored "Data" as well), in that case the factory reset doesn't matter at all. If you did it after you restored then, again, it's something different.
BerndM14 said:
Doesn't matter mate, if you restore the data partition the backup that you made of data gets restored, period. It'll be another issue worth interest if you deselected "data" while doing the restore. As you clearly stated yourself, you did a factory reset(wipe all) BEFORE you did the nandroid restore(In which case you might have restored "Data" as well), in that case the factory reset doesn't matter at all. If you did it after you restored then, again, it's something different.
Click to expand...
Click to collapse
I don't think you understand.
The restore never happened. It rebooted before anything happened when I told it to restore. Nothing got restored.
Hey guys,
So last night I accidentally wiped internal storage in TWRP. I guess that messed up my partitions or something, I don't know. Anyway, I can still access recovery, and I've tried to do a restore (one that I made back when I was on stock 4.4.2 I think) but after that it tries to boot, gets to "Android is upgrading... Optimizing app Y of X." and once that operation completes it shows the lockscreen for about a tenth of a second, and the phone reboots.
I'm stumped. Anyone know what can I do?
Sorry if this has been asked a hundred times. For some reason the search function in the forums isn't working for me. And I've been looking for a solution all morning.
EDIT: FYI when I tried the restore I did only System and Data and not Boot, because I was afraid that'd cause more problems.
Did you try restoring and performing a factory wipe before booting the newly-restored ROM?
It seems that Marshmallow based roms aren't working, but Lollipop ones will boot. Not sure why as I didn't have any problem with the same MM roms in the past.
More info:
MM roms wont flash in TWRP; after the failed attempt, TWRP says system cannot be mounted until I either wipe or install a 12.1 rom.
Tried to install a stock rom (4.4.2) and it failed in TWRP. Just says "Error Flashing"
Are you performing a full wipe (system, Dalvik, cache, data) before installing or restoring a ROM? Is the phone running the latest version of TWRP?
audit13 said:
Are you performing a full wipe (system, Dalvik, cache, data) before installing or restoring a ROM? Is the phone running the latest version of TWRP?
Click to expand...
Click to collapse
Yes to full wipe. TWRP is 2.8.7.0, so yeah I think it's the newest? Not 100% sure.
Wiping internal storage should not affect the partitions. I'm not sure that TWRP even has the ability to change partitions.
Yes, 2.8.7.0 is the latester version of TWRP.
If you are on the nj2 bootloader, try flashing this in TWRP: http://forum.xda-developers.com/galaxy-s3-att/general/rooted-ucufnj1-stock-rom-t2985006
Welp, seems to be all good now. Not sure if I really did anything to fix it or not. I tried to install a stock ROM but it wouldn't boot (stuck on Samsung logo) but after that my CM13 ROM installed properly again. The one CM13 ROM I have still wont install at all - maybe that file became corrupt or something? Not sure if that's even possible.
Either way I'm all fixed up. Thanks for all your help.
Cheers
Glad you got it sorted out. If you do figure out what you did to get it working, post your answer as it may help others that are in a similar situation.
Background:
1. Was on the latest Resurrection Remix. Made a Backup with TWRP.
2. Went back to stock [MTC20F] using this.
3. Updated to 7.0 using this threads 7.0 OTA.
4. Made a Backup in TWRP.
I restored the backup from point 1, but now my phone won't boot anymore.
It shows the boot animation for about 1 second. Goes black and reboots.
I tried restoring to 6.0.1 using the method in point 2 -> same problem.
Tried restoring to 7.0.0 using the same method -> same problem.
After that, I tried restoring from both of my TWRP backups. Neither of them get any further.
So, no matter what I do I cant get past the first second of the boot animation.
I'm out of ideas, any help is greatly appreciated!
TWRP version 3.0.2.1
MiePx3 said:
Background:
1. Was on the latest Resurrection Remix. Made a Backup with TWRP.
2. Went back to stock [MTC20F] using this.
3. Updated to 7.0 using this threads 7.0 OTA.
4. Made a Backup in TWRP.
I restored the backup from point 1, but now my phone won't boot anymore.
It shows the boot animation for about 1 second. Goes black and reboots.
I tried restoring to 6.0.1 using the method in point 2 -> same problem.
Tried restoring to 7.0.0 using the same method -> same problem.
After that, I tried restoring from both of my TWRP backups. Neither of them get any further.
So, no matter what I do I cant get past the first second of the boot animation.
I'm out of ideas, any help is greatly appreciated!
TWRP version 3.0.2.1
Click to expand...
Click to collapse
Did you boot into recovery and do a factory reset in there. Sometimes that works.
jsgraphicart said:
Did you boot into recovery and do a factory reset in there. Sometimes that works.
Click to expand...
Click to collapse
Yep, every time I try to restore something I wipe everything. Also tried to lock and unlock the bootloader. No Luck.
Also tried wipe and erasing every partition possible, flashing an older 6.0.1 build.
Am I SOL? I tried anything google would give me....
Hey, I'm currently in the very same situation. Was on 6.0.1 stock rooted, applied 7.0 OTA using the beta program. Then for various reasons wanted to roll back to where I was with 6.0.1, but now the device just constantly reboots. I have wiped everything I can, tried to flash the factory images multiple times, but nothing seems to do the trick.
same problem here
i was on rooted android n preview 5 with twrp recovery and root, i applied 7.0 ota and then it bricked
now it starts up till bootscreen with the 4 coloured dots it freezes and goes in a bootloop but fastboot and recovery working fine
flashed a factory image wiped everything tried diffrent things restored a twrp backup but nothing
now im going to try to flash 7.0 ota again
Also in the same situation :crying:. Gets to the boot animation for 1 second then freezes and restarts.
Updated to 7.0 and got stuck in a bootloop.
Then tried restoring my TWRP backup to no avail.
Then tried flashing 6.0.1 factory image and still no luck.
Done factory resets, wiped system, data partitions etc, and still same problem.
If anyone has any other ideas that would be greatly appreciated!
this is what i tried so far
-wiped and restored 3 diffrent backups
-full wipe and flashed diffrent roms
-flashed factory image 6.0 and 6.0.1
-flashed 7.0 ota zip in twrp (extracted and flashed system.img and vendor.img )
-flashed factory image and used stock recovery to flash 7.0 ota.zip trough ADB sideload
i think im going to relock the bootloader and just send it back to google for a repair
I'm on the same situation
32 hours after updating to final 7.0 from stock dp5 the device turned off and stuck on boot animation
it seems like google did something wrong...
Looks like some people with the 6P are having the same issue as well. Still no fix either.
http://forum.xda-developers.com/nexus-6p/help/botched-nougat-install-phone-boot-loop-t3445709
I've had the same problem. I was coming from from a Pure Nexus install and thought i'd have a look at 7 so I made a full backup in TWRP then installed the lastest TWRP (twrp-3.0.2-1-bullhead). Then did a full wipe all bar internal storage and flashed radio/bootloader zip and Stock+ rom from the tupac4u thread which worked fine. Upon deciding there were a few dealbreakers for me I decided to go back to PN. So I booted back into TWRP, wiped again and restored the previously made backup. that's when I was getting the boot to 4 dots and reboot bootloop. I tried everything flashing various MM roms, and flashing 7 again, different roms / vendor images / full wipes including int storage, all via TWRP and ADB to no avail.
Though this evening I decided to go to an even earlier version of TWRP (twrp-3.0.0-1-bullhead) and try everything again. I flashed that and tried the repair filesystem on all the partitons I could, one of them gave an error I can't remember what it was. After doing that I did a full wipe and restored my PN backup, everything ticked. I then rebooted with everything crossed and it worked, it booted without any problems! (apart from the fact i'd forgot to remove the pin security before backing up so had to reflash anyway! which also worked). I can't be sure which part of that fixed it but if it helps anyone else that's great!
People with this problem - Does flashing new Factory Image 7.0.0 (NRD90M) fix something?
Just curious.
zeesyl said:
People with this problem - Does flashing new factory image 7.0.0 (NRD90M) fix something?
Just curious.
Click to expand...
Click to collapse
Nope, changed nothing in my case at least. At this point I'm just going to use the warranty card to get out of this mess, as nothing seems to revive the device.
MiePx3 said:
Background:
1. Was on the latest Resurrection Remix. Made a Backup with TWRP.
2. Went back to stock [MTC20F] using this.
3. Updated to 7.0 using this threads 7.0 OTA.
4. Made a Backup in TWRP.
I restored the backup from point 1, but now my phone won't boot anymore.
It shows the boot animation for about 1 second. Goes black and reboots.
I tried restoring to 6.0.1 using the method in point 2 -> same problem.
Tried restoring to 7.0.0 using the same method -> same problem.
After that, I tried restoring from both of my TWRP backups. Neither of them get any further.
So, no matter what I do I cant get past the first second of the boot animation.
I'm out of ideas, any help is greatly appreciated!
TWRP version 3.0.2.1
Click to expand...
Click to collapse
Type fastboot -w flash falsh vendor vendor.img then restore from your twrp backups
neaznc021 said:
OMG I finally got mine to work
I'll note down the exact steps , most of which may or may not be relevant
1) Flashed MTC20F using TWRP 3.0.2-1
2) Booted into recovery and wiped everything and the partitions
- Add - Booted back into twrp 3.0.2-1 and then swiped to allow modifications
3) Then fastboot flashed TWRP 3.0.2-0
4) Restored my backup ( except recovery)
5) Still got stuck in the google screen.
Now the next parts are a bit weird
6) Booted into TWRP, flashed vendor.img from pure nexus rom
7) wiped everything except internal storage
8) Flashed vendor.img, pure nexus rom and gapps and then flashed vendor.img again
9) Rebooted and it worked
Let me know if it worked for you guys or if you need any more help
Click to expand...
Click to collapse
this worked for me
neree said:
Nope, changed nothing in my case at least. At this point I'm just going to use the warranty card to get out of this mess, as nothing seems to revive the device.
Click to expand...
Click to collapse
Did that yesterday (With my N6P), will see what will come out of it. (Service guys said, that ''Oh, it's nothing serious, tomorrow (today) you will get your phone back (hopefully in working condition)''. I'm not so sure about that
(EDIT: Before I took my phone to warranty service, I flashed latest MM factory image and locked bootloader, maybe it was unnecessary, but I wanted to be sure, that phone looks fresh, maybe it was a big mistake.)
I had the same Bootloop issue, and it's all because of TWRP 3.0.2-1 !!! I have just reverted back to TWRP 3.0.2-0, and my backup restored just fine. There's no point for all that flashing. Just revert the TWRP.
Oh my... Guess what? My backup is corrupted...
Edit: maybe this can help, before bricking with full factory image, I flashed bootloader, radio, boot, vendor, system, Elementalx and supersu, wiped data and booted and work.
But I had problems with suspersu installed as systemless (it didn't work), so I flashed factory image. And bootlooped.
So, I'd say that what's causing issue is userdata, recovery or cache.