Hi Guys,
I am really new to the rooting customary process. Pardon me if there are information that I am not aware of. Okay, I always wanted to root to install apps that were restrictive to what I want and how to manage the phone properly. But I bought my Note 2 in Singapore, which is why I was hesitating as most of the guides were for AT&T and other American phone companies.
I was hesitating but a friend of me referred me to a very simple clip to root with using Odin
Needless to say, I rooted the phone and was able to install the couple of applications I wanted though there were a few I still couldn't find replacements for (Market Unlocker, AdAway).
However, I find myself not being to use ROM Manager to backup and change ROMS and being different with how normal people rooted. I think it has got to do with the how I had my phone rooted.
Please advice how I can place myself in what the general public is using as it would be easier for me to configure the phone if I were to try looking for assistance in the future.
Should I unroot and root using the XDA developer suggested way (I found the clip on YouTube but it wasn't for the firmware 4.1.2, thus I hesitated) ? After rooting my phone says its firmware is 4.1.1
Actually, if someone could also answer me whether
1) I can update my phone after rooting or do I need to unroot and update and root it again ?
2) Is the furthest update for Note 2 is 4.1.2 and in order to go for further updates I need to root ?
Again, pardon my knowledge on rooting. Thanks
McBrand said:
Hi Guys,
I am really new to the rooting customary process. Pardon me if there are information that I am not aware of. Okay, I always wanted to root to install apps that were restrictive to what I want and how to manage the phone properly. But I bought my Note 2 in Singapore, which is why I was hesitating as most of the guides were for AT&T and other American phone companies.
I was hesitating but a friend of me referred me to a very simple clip to root with using Odin
Needless to say, I rooted the phone and was able to install the couple of applications I wanted though there were a few I still couldn't find replacements for (Market Unlocker, AdAway).
However, I find myself not being to use ROM Manager to backup and change ROMS and being different with how normal people rooted. I think it has got to do with the how I had my phone rooted.
Please advice how I can place myself in what the general public is using as it would be easier for me to configure the phone if I were to try looking for assistance in the future.
Should I unroot and root using the XDA developer suggested way (I found the clip on YouTube but it wasn't for the firmware 4.1.2, thus I hesitated) ? After rooting my phone says its firmware is 4.1.1
Actually, if someone could also answer me whether
1) I can update my phone after rooting or do I need to unroot and update and root it again ?
2) Is the furthest update for Note 2 is 4.1.2 and in order to go for further updates I need to root ?
Again, pardon my knowledge on rooting. Thanks
Click to expand...
Click to collapse
Please do more research before doing anything but I would question if you have a custom recovery installed? You could use GooManager on the market to install a custom recovery (Open GooManager -> menu -> "Install OpenRecoveryScript") but check your phone model number first and make sure it matches the file you are about to flash. This would enable you to work with flashing and such. Also check your model number I believe the Verizon phones have locked bootloaders and don't know if your will or not (I believe this adds steps to flashing a custom recovery.) Wish I could be of more help.
I am creating this thread because I have not found another ZACT rooting/flashing thread yet and I am hopping that a dev will pop in and start working on this, or help walk me through what I can do to get the ball rolling. Check out my first thread, The future of phones is coming
I received 2 phones a few weeks ago now. I wasn't thinking and just jumped the gun and updated to 4.3 on one of them (the other is my fiances and have instructed her NOT to do the update). I am unable to cf-auto-root with the sprint s3 method, so no root. I read if I get the recovery.img from the phone I can post in on Chainfire's cf-auto-root page and he can make a cf-auto-root for the zact s3. I can not get a recovery.img to send in because it is my understanding that to adb pull the recovery I need root. cant get root because I dont have a recovery.img?
I spoke with zact team members a few times. I told them I was having issues with 4.3 and wanted to go back to 4.2.2. A few people were helpful at first. Unfortunately, they are so small, I seem to keep running into the same people, and then they stop trying to help. What I have learned is, they "have confirmed with there Team, that if you process the software downgrade, the Zact software will not work on your phone. This is based upon how our software interfaces with the firmware." SO, that being said we would need to find out what software they have installed and have it integrated into any roms made. Does that sound right?
They also WILL NOT share the MSL. Which is another reason I want root. I still plan on cloning the phone as a backup if I have issues with flashing. but without the msl, i cant change the qualcomm settings to connect to dfs/cdma to back clone it.
I am not a developer, I could use some direction. I feel ZACT will start growing once people realize how much you can save compared to a sprint plan. I have noticed that I get better service then a lot of the people I work with. I am on prl version 24017, which I have not seen before either.
devildogwillbur said:
I am creating this thread because I have not found another ZACT rooting/flashing thread yet and I am hopping that a dev will pop in and start working on this, or help walk me through what I can do to get the ball rolling. Check out my first thread, The future of phones is coming
I received 2 phones a few weeks ago now. I wasn't thinking and just jumped the gun and updated to 4.3 on one of them (the other is my fiances and have instructed her NOT to do the update). I am unable to cf-auto-root with the sprint s3 method, so no root. I read if I get the recovery.img from the phone I can post in on Chainfire's cf-auto-root page and he can make a cf-auto-root for the zact s3. I can not get a recovery.img to send in because it is my understanding that to adb pull the recovery I need root. cant get root because I dont have a recovery.img?
I spoke with zact team members a few times. I told them I was having issues with 4.3 and wanted to go back to 4.2.2. A few people were helpful at first. Unfortunately, they are so small, I seem to keep running into the same people, and then they stop trying to help. What I have learned is, they "have confirmed with there Team, that if you process the software downgrade, the Zact software will not work on your phone. This is based upon how our software interfaces with the firmware." SO, that being said we would need to find out what software they have installed and have it integrated into any roms made. Does that sound right?
They also WILL NOT share the MSL. Which is another reason I want root. I still plan on cloning the phone as a backup if I have issues with flashing. but without the msl, i cant change the qualcomm settings to connect to dfs/cdma to back clone it.
I am not a developer, I could use some direction. I feel ZACT will start growing once people realize how much you can save compared to a sprint plan. I have noticed that I get better service then a lot of the people I work with. I am on prl version 24017, which I have not seen before either.
Click to expand...
Click to collapse
WARNING!! If you process that downgrade, you will trip KNOX security, then your phone will be bricked. Also, ESN cloning is illegal to talk about on XDA.
sent from my GS3
I will trip knox security? What exactly does Knox do, and what do you mean by that? I though Knox just makes it read 0x1 on the odin screen if you flash now? If thats what you mean, I already did that by flashing cf-auto-root. Its my understanding that the boot loader is the issue when downgrading. but on this site, they say that only at&t users should not try it, and technically this is a sprint phone I believe. Just with added software.
If I am wrong please let me know.
Also, I think you mean that it is not acceptable, not illegal. Illegal would imply I could get arrested for commenting about phone cloning on this site. And although cloning your personal phone for your own uses is not illegal, I will not mention it again on these forums. Thanks for the warnings.
sent from my GS3
Also, I guess I am not necessarily trying to downgrade, just trying to find out what needs to be done so that I can flash or ANYTHING to get away for 4.3 issues. Since the upgrade, my fiance sent me an mms and it has popped up in my messages 5 times, so it looks like she keeps sending it, but I am unable to open it because it wont download.
The more important issue is root. I want to be able to use my root apps to backup, re install my old backups from my last s3, and attempt to get my msl to try and fix the mms issue.
sent from my GS3
Today has been a productive day so far... using Skunk Ape1's root method "[Tutorial] Rooting the Sprint GalaxyS3 the Easy Way" I was able to get twrp recovery installed. (I wasn't able to do this before because prior the only method i knew was to go to goo.manager and that didn't recognize my device) SO, with twrp installed, i flashed the zip file from Skunk Ape1's root method. Following the instructions to the T everything seemed to work fine. After reboot, I had a knox message popped up, saying "SECURITY NOTICE: Unauthorized access to a secured area has..." I relive that root has been installed but knox is keeping locked up still. I am going to look for this mysterious "Knox remover script" that you will see in the first post on that page, then I will attempt root again.
I have officially given up on root currently. I have tried every root method I can find, my flash counter is somewhere around 13. I was able to use the knox removal script from here If anyone has suggestions for root, I am open to ideas. Thanks.
Finally did it
So, today i was just realizing the lack of space i had on my phone from downloading stuff and photos so i wanted to clean it up. I moved all the important stuff off, and though it would be a good time to factory reset and just have a clean new phone to start over again. ( I missed flashing and this was the closest thing I had) So, during the process of factory resting i wanted to clean everything so i click data, cach, internal external.. system.. yeah well bad idea. my phone rebooted and go stuck on the boot. So i restarted in recovery and reset again and this time is warned me that there was no OS installed... F*ck... Zact customer service wont give me the "custom software" that they installed so im screwed.
After hours of thinking and trying to do stupid odd ball things that i knew wouldnt work. I downloaded a sprint stock 4.3 tar file and odined to my phone. started up fine. works great. so... what zact said about flashing roms bricking this phone was BS.. the only custom thing i have seen was in the zact mobile app that came installed had some extra features used to send usage info and reboot stuff for zact troubleshooting. so with stock sprint rom, and zact mobile app im back to my phone working. AND with that, im going to move on to the rooting, and flashing of this piece of crap. Ill be back with more details later.
I have installed CyanogenMod with full root!!!
well first off, i had the CMinstaller set up but it did not recognize my device so after a while i decided to attempt to cf_auto_root, which seemed to work but failed root checker. I wanted to try another method. I had CMinstaller still up* I was attempting THIS method to root. I was using philz_touch_6.15.4-d2spr.tar.md5 that I flashed using Odin 3.07 (that I have had for a long time on my pc. so google that one)https://www.google.com/search?q=odin+3.07&oq=odin+3.07&aqs=chrome..69i57.3464j0j1&sourceid=chrome&ie=UTF-8 After i installed Philz touch, i noticed CMinstaller noticed my phone and started downloading system files. I continued what i was doing with the root method and installed DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0 and UPDATE-SuperSU-v1.93 just as CMinstaller finished its download, so i said what the hey, and clicked install. next thing i knew i was running cyanogenmod with full root!!! please someone else verify this and let me know if you get it going too.
Deleted
Stock 4.3 with root
so yeah, just for to check i flashed back to stock 4.3 (not sure who uploaded it but it works) It does have knox so be warned. I then followed the root method in my previous post and it worked fine. i have stock with root. If someone can try it without using that tar file, let me know. Cant really go back once you do it so i cant try the root method with the zact "custom software" myself. Let me know what you find out. Hope this helps someone.
Thanks
Thanks for posting your struggles and successes. With Zact shutting down I was curious about what I could do with my kids' S3s if I don't like the Sprint plan that they are rolling us into. I may be trying this in a couple weeks...
Zact to Ting
Barnsie said:
Thanks for posting your struggles and successes. With Zact shutting down I was curious about what I could do with my kids' S3s if I don't like the Sprint plan that they are rolling us into. I may be trying this in a couple weeks...
Click to expand...
Click to collapse
What I would do and have done for my fiance and myself, get on Zact.com live chat ask them to Deactivate your phones. and give them the DEC on the back of the phones. It takes about one min for it to complete per phone. Then go on over to Ting.com and start up a new account with them using your old zact phone. Ting also lists the MSL that i struggled so much trying to get. I would recommend flashing a stock rooted rom debloated, to get all that ZACT crap off your phones. and start out fresh.
I am looking to just get ROOT without any changes in the stock kernel.
I don't want the weird name sounding ROM's or any of that.
Just some way to get root so I can load Titanium Backup and FREEZE the AT&T bloatware
I just go the OTA today (11/14/14) when I turned my phone on. It's the AT&T SGH-I317
and now say
Android 4.4.2
Build Number
KOT49H.I317UCUCNJ1
Device Status
Official
So is there a quick and easy way to do this?
I use a iMac BUT I can boot into Windows 7 Ultimate also (which from rooting phones before I usually always go that route).
Any help/directions would be appreciated.
Also this, who comes up with those weird names for different ROM's that NEVER really explain, in plain old English, what they do?
I can't (or don't want to) learn the syntax lingo used to find a working ROM that does just a simple thing, give you ROOT, even after reboots/yank battery/etc.
Maybe a one-click solution?
thanks :fingers-crossed:
philmiami
You should try CF Autoroot
any confirmation that CF root works on 4.4.2 with NJ1 OTA update/
as soon as someone gets a root to stick
and I mean just standard, stock adding su to the mix
post the steps as to how you did it
a one click root would of course be the best......
but at least tell us how you did it, and screen shots to show would help too.
thanks
philmiami
I haven't gotten root with Odin yet. No brick in and everything shows custom but US throws an error
Hey all -- I just got a Note 4 from FreedomPop (Tanga deal). I used the following service and it is successfully unlocked. It's running a bloated 6.0.1 currently. In the unlock process, the phone was rooted. He mentioned I would need to throw on a stock ROM, but didn't give me much more detail. Just said we were done unlocking and didn't have much to say after that. Now, the phone IS working in 6.0.1 which I'm fine with. But if I wanted to clean it up, what would be my path? TWRP, backup, restore a stock TMobile ROM then do OTA updates? Or just run a debloater (Titanium) and get rid of stuff I don't want (right now feeling that's where I'll go)?
Any help appreciated. I've done plenty of rooting and messing around, but typically not without following a detailed guide on forums like XDA Thanks.
Unlock service?
Can i ask which service you use?
Alright so... Apparently I rooted my phone at some point and over the years my phone has gotten really slow. After Googling a bit I found my phone is still on 7.0 when it should be on 8.0 and that confused me a bit until I realized I rooted my phone at some point when I dug up some Android files on my computer. I found this website and discovered I had an account here, so I looked up my posts and found I had used a guide to root my phone located here: https://forum.xda-developers.com/moto-z-play/how-to/howto-moto-z-play-unlock-root-t3508547
After reading around for quite some time I learned that apparently I had to unlock the bootloader to root this phone when on most devices you don't have to apparently, making rooting this device not as simple as just installing an app and pressing a few buttons like on some phones. The guide talks a lot about fastboot and flashing and I have no idea how to follow these steps as it feels like there are steps between steps that are missing since everyone else here already seems to know what to do without including how to do certain steps.
After hours of reading through threads I decided that I wanted to just flash my phone back to a fresh unrooted version of Android and then install the updates OTA. I just spent hours backing up all my apps with Helium until I realized it couldn't backup some apps, so I then Googled and discovered Titanium Backup and backed up everything again through it. Well... why the apps were backing up I stumbled upon a thread here that said I would brick my phone if I flashed back to the original version of Android on this phone then tried to update to the newest version OTA.
Well now I'm a bit paranoid and am hoping someone here can walk me through how to upgrade my rooted Moto Z Play running Android 7.0 to Android 8.0 without bricking it, or throw a guide my way that explains how to do this for simpletons like me.
TL: DR - I suffer from amnesia and don't remember how I ended up rooting my phone, and need to find someone that can explain to someone who is not knowledgeable like me how to upgrade my rooted Moto Z Play to Android 8.0 since my phone is running like hot garbage after all these years.
Thank you in advance to anyone who spent any time reading this wall of text
After messing around for over 12 hours I surprisingly got my phone in a working rooted state on Android Oreo 8.0 without bricking it... But there's one snag. Each time I boot my phone, I first get the "Your device has been unlocked and can't be trusted" (Bootloader unlocked warning) and then it takes me straight into TWRP. Even if I hit Reboot and select "System" it just loops back into TWRP. The only way I can get into my phone it seems is to boot into the bootloader then select start. Not really a big deal, but it's still annoying.
I'm hoping this is something that requires an easy fix and that someone is willing to guide me through it.