Develop Bugs

Android codes

This is a copy paste from another forum, i take no credit/responsibility
Thought it might be of use for somebody
Android codes
FYI These codes have been obtained by decoding various .apk files present in the phone firmware.
*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.
*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.
*#*#7594#*#*
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
Codes to get Firmware version information:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
Codes to launch various Factory Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
NOTE: All above codes have been checked on Google Android phone Samsung Galaxy I7500 only but they should also work in other Google Android phones

The only one I can get to is
*#*#INFO#*#* (*#*#4636#*#*)

Diagnosis code

hello guys, starting this trhead for a list of diagnostic codes. Samsung Omnia for 7 .. come forward and help all.
Enter always in diagnosis mode with: ##634# and hit the call button.
And now Try this code:
1) *#0*# for the LCD test
2) *#2*# for Debug Mode
3) *#3*# for TestBrigthnes
4) *#1234#* for Version
5) *#32489# for Test Mode - CIPHERING CONTROL
6) *#2263# for Test Mode - BAND PREFERENCE
7) *#0782# for RTC Time
8) *#0673# for MP3 Test
9) *#9090# for Test Mode - DIAG CONFIG
10) *#0842# for Vibrator Test
11) *#2580# for INTEGRITY CONTROL
12) *#0011# for Test Mode - WCDMA
13) *#7465625# for Personalize - Lock Status - Network Lock - Subset - SP Lock - Cp Lock
14) *#232337# for BT Mac Address
15) *#0002*28346# for INCREASE VOLUME !!!!!! - Sound Tuning: But i dont know use it - help me please
16) *#7284# for Micro USB Test (Zune Sync, Modem Tethered Call, Modem USB Diag)
17) *#1472365# for Location Service
18) *#05# for Simple Test
19) *#2470# for CameraFWUpdate

You can add :
Micro USB Test *#7284# (Zune Sync, Modem Tethered Call, Modem USB Diag)
Location Service *#1472365#
Simple Test *#05#
CameraFWUpdate *#2470#
PDAphoneAddict.com

Erwan960 said:
You can add :
Micro USB Test *#7284# (Zune Sync, Modem Tethered Call, Modem USB Diag)
Location Service *#1472365#
Simple Test *#05#
CameraFWUpdate *#2470#
PDAphoneAddict.com
Click to expand...
Click to collapse
Ok Many Tanks!!!

thank's but Not for Mozart maybe later ...

How do I input the codes once at the diagosntic screen?

What's with the beeping on the RTC Time screen?
The location service is actually pretty useful! It shows altitude and speed, as well as GPS co-ordinates.

more than 60 diagnosis codes
I've written 2 posts on my blog listing more than 60 diagnosis codes (tested on my Samsung Omnia 7), and how to use them:
post 1 : martani[dot]net/2010/12/windows-7-hacks-all-diagnosis-codes-you.html
post 2 : martani[dot]/2010/12/windows-7-hacks-all-diagnosis-codes-you_26.html (sorry can't post links yet!)
Enjoy

Android hidden secret codes...

DISCLAIMER: This information is intended for experienced users. It is not intended for basic users, hackers, or mobile thieves. Please do not try any of following methods if you are not familiar with mobile phones. We'll not be responsible for the use or misuse of this information, including loss of data or hardware damage. So use it at your own risk.
*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.
*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.
*#*#7594#*#*
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
Codes to get Firmware version information:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
Codes to launch various Factory Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version

Great

I've not tested all, but all those I've tested except the the first one don't work in CM7
Should be precised in first post.

sachin kundu said:
DISCLAIMER: This information is intended for experienced users. It is not intended for basic users, hackers, or mobile thieves. Please do not try any of following methods if you are not familiar with mobile phones. We'll not be responsible for the use or misuse of this information, including loss of data or hardware damage. So use it at your own risk.
Click to expand...
Click to collapse
Excelente, great information.

Take photos from hackers

[Q] Choose baseband (eg WCDMA 850)

I'm coming from the Samsung Captivate, and on those ROMs I could choose which baseband I wanted to use based on performance. I used to access that by entering #*#*2263*#*#
Is there any way to do something similar on the GS3?
Regards
Smith

*#2263# RF Band Selection - is where your answer lies I believe Also here is the list as per and thanks to anil84
SAMSUNG GALAXY S3 CODES SECRETS
*#06# Show IMEI number
*#0*# LCD Test Menu
*#*#4636#*#* user statistics and Phone Info
*#0011# Displays status information for the GSM
*#1234# View SW Version PDA, CSC, MODEM
*#12580*369# SW & HW Info
*#197328640# Service Mode
*#0228# ADC Reading
*#32489# (Ciphering Info)
*#232337# Bluetooth Address
*#232331# Bluetooth Test Mode
*#232338# WLAN MAC Address
*#232339# WLAN Test Mode
*#0842# Vibra Motor Test Mode
*#0782# Real Time Clock Test
*#0673# Audio Test Mode
*#0*# General Test Mode
*#2263# RF Band Selection
*#9090# Diagnostic ConfiguratioN
*#7284# USB I2C Mode Control
*#872564# USB Logging Control
*#4238378# GCF Configuration
*#0283# Audio Loopback Control
*#1575# GPS Control Menu
*#3214789650# LBS Test Mode
*#745# RIL Dump Menu
*#746# Debug Dump Menu
*#9900# System Dump Mode
*#44336# Sofware Version Info
*#7780# Factory Reset
*2767*3855# Full Factory Reset
*#0289# Melody Test Mode
*#2663# TSP / TSK firmware update
*#03# NAND Flash S/N
*#0589# Light Sensor Test Mode
*#0588# Proximity Sensor Test Mode
*#273283*255*3282*# Data Create Menu
*#273283*255*663282*# Data Create SD Card
*#3282*727336*# Data Usage Status
*#7594# Remap Shutdown to End Call TSK
*#34971539# Camera Firmware Update
*#526# WLAN Engineering Mode
*#528# WLAN Engineering Mode
*#7412365# Camera Firmware Menu
*#07# Test History
*#3214789# GCF Mode Status
*#272886# Auto Answer Selection
*#8736364# OTA Update Menu
*#301279# HSDPA/HSUPA Control Menu
*#7353# Quick Test Menu
*2767*4387264636# Sellout SMS / PCODE view
*#7465625# View Phone Lock Status
*7465625*638*# Configure Network Lock MCC/MNC
#7465625*638*# Insert Network Lock Keycode
*7465625*782*# Configure Network Lock NSP
#7465625*782*# Insert Partitial Network Lock Keycode
*7465625*77*# Insert Network Lock Keycode SP
#7465625*77*# Insert Operator Lock Keycode
*7465625*27*# Insert Network Lock Keycode NSP/CP
#7465625*27*# Insert Content Provider Keycode
*#272*IMEI# then we will get buyer code (For samsung galaxy sIII csc code)
*#*#7780#*#* Factory data reset - Clears Google-account data, system and program settings and installed programs. system will not be deleted, and OEM programs, as well as My Documents (pictures, music, videos)

Bah, wrong thread...ignore

Network Lock Menu via Service Menu

Does anyone know how to get to the network control via the service menu on the ATT note 4?
I know *#197328640#. will open the Debug Screen, Im not sure how to get to the Phone Control, then Network
Lock and then the options menu.
Is it not a option at all?
Network Secret codes for Samsung galaxy- SOME WORK FOR THE NOTE 4 SOME DONT
*7465625*638*# This code gives you the ability to customize Network Lock MCC/MNC
#7465625*638*# Use this code to perform Network data locks and (Insert Network Lock)
*7465625*782*# Customize your Network Lock NSP
#7465625*782*# input any semi- Partiality Network Lock Keycode
*7465625*77*# Key code for Network lock SP
#7465625*77*# Secret key to insert network operator
*7465625*27*# Secret code for Network lock and operation for NSP/CP
#7465625*27*# Secret code for Samsung galaxy Content Provider network insertion
*#272*IMEI# Samsung galaxy s3 csc code -gives your the buyer code
*#2263# RF Band -select your network mode type

eyesofice said:
Does anyone know how to get to the network control via the service menu on the ATT note 4?
I know *#197328640#. will open the Debug Screen, Im not sure how to get to the Phone Control, then Network
Lock and then the options menu.
Is it not a option at all?
Click to expand...
Click to collapse
This is what ive seen online:
On the dialpad on your phone, type in *#197328640#.
Then select [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3] Perso SHA256 OFF.
Wait for 30 seconds or so before returning to your main menu by choosing back.
In the main menu, you should see a “Network Lock” message, now choose [4] NW Lock NV Data INITIALLIZ.
none of this is a option:
Then select [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3] Perso SHA256 OFF.
Wait for 30 seconds or so before returning to your main menu by choosing back.
In the main menu, you should see a “Network Lock” message, now choose [4] NW Lock NV Data INITIALLIZ.
Any suggestions?

Ive found: IM TRYING TO UPDATE THIS ASAP, IM CURRENTLY AT WORK AND NOT SUPPOSE TO HAVE MY PHONE OUT SO IM TRYING TO GO MENU BY MENU
A found the way to enable ServiceMneu on Galaxy Note 4
*#0011#
Menu>Back
Menu>Input>Q
Menu>Input>0000 wait some seconds and Hello service menu )
Then you get a screen that says:
1 Protocol State
2 UE SETTING AND INFO
3 ECT
4DEBUG SCREEN(OPEN)
5 HW TEST
WHEN ACCESSING THE DEBUG SCREEN YOU GETS
1 BASIC INFO
2 NAS INFO
3 AS INFO
4 SIM INFO
5 CDMA DEBUG INFO
when you clock on CDMA DEBUG INFO it takes you to a Debug Menu and cant click on it... not sure if there is a letter or a number that needs to be put in there to access that menu further
When you select SIM INFO
You get 2 options
1 GENERAL INFO
2 QMI UIM STATUS
When you select NAS INFO you get 6 options
1 MM INFO
2 GPRS INFO
3 REJECT INFO
4 BACKOFF FPLMN
5 SMC RESULT INFO
6 CALL END CAUSE
When you click on UE Settings:
UE SETTING
UE PROTOCALL MENU
1 AS
2 NAS
3 CDMA
4 GCF
5 SIM
6 GPS
7 IMS
8 TDSCDS
When you select 1 AS you get the following options:
AS CONFIG
1 FREQUENCY LOCK
2 RELEASE VERSION
3 DSDS INACTIVITY TMR
4 DRX CONTROL
5 SECURITY CONTROL
6 AMR CONTROL
7 LTE FGI FILE CONTROL
8 ACQ DB DELETE
9 NULL INTEGRITY MENU
When you select 5 Sim you get:
SELCET SIM
1 SIM CLASS CONTROL
2 UIM RESET CONTROL
3 IMSI REPLACEMENT CONTROL
4 SIM FPLMN CONTROL
5 EF_RAT CONTROL
When you select Protocal State
1 BASIC INFO
2 AS INFO
3 ECT ( PRESS ON THAT AND IT SAYS MENU DOES NOT EXIST- WONDER IF ITS A HIDDEN MENU THAT NEEDS A KEY SEQUENCE TO GET TO THE NETWORK LOCK
4 NAS INFO
5 SIM INFO
6 PROTOCOL SIMULATION

Others that I have found but not tested:
Samsung Galaxy Secret Code
*#06# (Display IMEI number)
*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)
or *#7780#
*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)
or *#272*HHMM#*
*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*782*# (Configure Network Lock NSP)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)

A found the way to enable ServiceMneu on Galaxy Note 4
*#0011# type this code "Q" than 0000 type don't see the service mode network band change
please help me how to do it this note 4 function .........