Unrooted, Stock HTC One X dead - HTC One X

hi, my htc one x is dead, i cannot on it. heres what happened.
i was facebooking
then the app keep crashing
then after that everything started crashing, like got this google processor thing
and aft that my whole phone just shut down
then when i hold the power button, got this weird thing come out
like some weird numbers
then got option HBOOT, REBOOT, REBOOT something loader, and POWER DOWN
after that i managed to got into recovery and hard resetted it but it got stuck at the htc one logo. help!

If you never unlocked the bootloader ....send it in for warranty. Nothing we can do about that !

D:\Tel\one x\soft\Fastboot\Fastboot>fastboot oem readcid
... INFODEBUG: cid: VODAP001
OKAY [ 0.035s]
finished. total time: 0.035s
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot getvar version-m
version-main: 3.14.161.27
finished. total time: 0.035s
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot oem RebootRUU
... INFO[ERR] Command error !!!
OKAY [ 0.020s]
finished. total time: 0.021s
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot oem lock
... INFOLock successfully...
FAILED (status read failed (Too many links))
finished. total time: 0.152s
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot oem RebootRUU
... INFO[ERR] Command error !!!
OKAY [ 0.128s]
finished. total time: 0.129s
D:\Tel\one x\soft\Fastboot\Fastboot>
i can't run rebootRRU i want return to stock rom .i not have backup from 3.14.161.27 what can i do ? thx

Type fastboot oem rebootRUU (Not RebootRUU)

thank you very mutch you right can you help me more ?
firmware111.zip is OTA_ENDEAVOR_U_JB_45_S_Vodafone_UK_3.14.161.27-2.17.161.4_release_299172atv1b11ychs0d2fs
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot oem readcid
... INFODEBUG: cid: VODAP001
OKAY [ 0.012s]
finished. total time: 0.012s
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot oem lock
... INFOLock successfully...
FAILED (status read failed (Too many links))
finished. total time: 0.141s
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot oem rebootRUU
... INFOSave data from original MSC...
INFOSave data from SIF...
INFOUpdate partition data to SIF partition
INFOUpdate partition data from original MSC...
INFO[MSG] OKAY
OKAY [ 0.206s]
finished. total time: 0.207s
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot flash zip firmware.zip
sending 'zip' (12876 KB)... OKAY [ 1.676s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
INFOchecking model ID...
INFOchecking custom ID...
INFOchecking main version...
INFOchecking hboot version...
INFOstart image[hboot] unzipping for pre-update check...
INFOstart image[boot] unzipping & flushing...
INFOFormat partition LNX done
INFO[RUU]WP,boot,100
INFOstart image[hboot] unzipping & flushing...
INFO[RUU]WP,hboot,50
INFOsignature checking...
INFOstart image[recovery] unzipping & flushing...
INFOFormat partition SOS done
INFO[RUU]WP,recovery,100
INFOERASE backup cid
OKAY [ 4.825s]
finished. total time: 6.503s
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot flash zip firmware111.zip
sending 'zip' (374962 KB)... OKAY [ 48.630s]
writing 'zip'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 65.465s
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot erase cache
erasing 'cache'... OKAY [ 0.186s]
finished. total time: 0.186s
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot oem rebootRUU
... INFOSave data from original MSC...
INFOSave data from SIF...
INFOUpdate partition data to SIF partition
INFOUpdate partition data from original MSC...
INFO[MSG] OKAY
OKAY [ 0.193s]
finished. total time: 0.194s
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot flash zip firmware111.zip
sending 'zip' (374962 KB)... OKAY [ 48.869s]
writing 'zip'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 65.693s
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot getvar version-main
version-main: 3.14.161.27
finished. total time: 0.006s

Well you flashed your firmware. What else do you need? What are you even trying to do?

I guess a custom recovery and a brand new JB Rom

Mr Hofs said:
I guess a custom recovery and a brand new JB Rom
Click to expand...
Click to collapse
I installed custom ROM, based on the 3.14 stock, I had the working device but without cellular network (no signal / no service) and with WiFi whish is working incorrectly (it couldn't detect my home wireless network, for example)
but i prefer to install the stock rom (vodafone UK) . i don't no what i did wrong

Did you flash the correct boot.img file ?

TToivanen said:
Well you flashed your firmware. What else do you need? What are you even trying to do?
Click to expand...
Click to collapse
my firmware not was completed when i flash
D:\Tel\one x\soft\Fastboot\Fastboot>fastboot flash zip firmware111.zip
sending 'zip' (374962 KB)... OKAY [ 48.869s]
writing 'zip'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 65.693s
---------- Post added at 12:07 AM ---------- Previous post was at 12:02 AM ----------
Mr Hofs said:
Did you flash the correct boot.img file ?
Click to expand...
Click to collapse
yes the boot from custom rom , afther erase cache , install rom , i switch on the phone same problem everithing ok but network signal and wifi doesn't work , after this ncx_317_v14-RENOVATE , boot.img and update zip ...

your main version number tells me you have an updated JB hboot ! did you do a FULL wipe in the recovery before installng the new rom ?

yes i did every time , i think all i need is a compatible karnel with mods , i try a lot but i didn't find.
can you help me with OTA_ENDEAVOR_U_JB_45_S_Vodafone_UK_3.14.161.27-2.17.161.4_release_299172atv1b11ychs0d2fs.exe ??

What do you mean.....the kernel delivered with the rom is in 99% the right boot.img. except for some aosp roms.
Flash the delivered boot.img from the desired rom, perform a full wipe and install the rom ....must work !
Dont know what you tried ?
I bet your ruu has not been released
Btw you need to full wipe that means, cache, dalvik cache, data, system before you install the new rom......dalvik cache is forgotten a lot

Hey this thread is going in the wrong direction. Lol! This isnt even about my question..

PokMahPok said:
Hey this thread is going in the wrong direction. Lol! This isnt even about my question..
Click to expand...
Click to collapse
You've been highjacked mate.... so what about your problem ?
Edit : and i never got a answer from you regarding your question !

Related

[Q] (semi)bricked nand | hboot (s-off) + clockworkmod (without usb) alive

info: htc desire bravo | hboot 0.93 S-OFF | clockworkmod 2.5.0.7
well, beeing brain-afk while following a guide for cyanogenmod6 with a2sd, i used a mtd-repartition tool for the g1.
after repartitioning and rebooting, clockworkmod cant mount sdcard anymore - probably because device nodes got changed. "E: Can't mount /dev/block/mmcblk0
i reflashed clockworkmod via fastboot hoping it could fix something, but no, didnt help. i cant install any zip because i have no sd-card. i cant boot to the android system, because i dont have an android system.
my idea would be: erase recovery, flash a tool which restores partition table, start "recovery" so that this tool does its job, flash clockwork mod again and install the operating system.
any better ideas or hints for what that "magical tool" can be would be appreciated.
after more reading and more testing, i understand, i destroyed the SPL
this would explain:
why sdcard isnt mountable
why i cant access the device via adb
why linux doesn't detecht a propper device - only a high-speed usb device
next on investigate list: how to flash an spl - isnt that what hboot s-off includes?
mad-murdock said:
after more reading and more testing, i understand, i destroyed the SPL
this would explain:
why sdcard isnt mountable
why i cant access the device via adb
why linux doesn't detecht a propper device - only a high-speed usb device
next on investigate list: how to flash an spl - isnt that what hboot s-off includes?
Click to expand...
Click to collapse
yes alpharev is a modfied spl, but i dont know if your going to flash it if nothing will detect your device as a desire
well, even more testing...
my alpharev hboot does support flashing all partitions! great!
i did like its said on the alpharev homepage:
Code:
fastboot flash hboot bravo_alphaspl.img
it said, it worked.
i had an old leedroid backup and found this:
Code:
V:\nandroid\LeeDrOiD 2.2a - 2010-10-14.19.57.06>fastboot flash boot boot.img
sending 'boot' (2944 KB)... OKAY [ 0.564s]
writing 'boot'... OKAY [ 0.816s]
finished. total time: 1.381s
V:\nandroid\LeeDrOiD 2.2a - 2010-10-14.19.57.06>fastboot flash recovery recovery
.img
sending 'recovery' (4608 KB)... OKAY [ 0.636s]
writing 'recovery'... OKAY [ 1.318s]
finished. total time: 1.955s
V:\nandroid\LeeDrOiD 2.2a - 2010-10-14.19.57.06>fastboot flash cache cache.img
sending 'cache' (14 KB)... OKAY [ 0.017s]
writing 'cache'... OKAY [ 0.289s]
finished. total time: 0.306s
V:\nandroid\LeeDrOiD 2.2a - 2010-10-14.19.57.06>fastboot flash data data.img
sending 'data' (113672 KB)... OKAY [ 15.289s]
writing 'data'... FAILED (remote: partition does not exist!)
finished. total time: 15.293s
V:\nandroid\LeeDrOiD 2.2a - 2010-10-14.19.57.06>fastboot flash system system.img
sending 'system' (247291 KB)... FAILED (remote: data length is too large)
finished. total time: 0.005s
so, no system and data partition around - hboot, recovery and boot already reflashed. i also tried the spl with less system and more data bravo_alphaspl-n1table.img - but it doesnt seam to create the partitions if they are missing.
edit: why is fastboot missing in the linux android sdk btw? have to use windows for this...
its late, and i cant find a way to get further. no idea how to re-setup my mtd partitions atm or why i dont have adb in clockworkmod even i reflashed the spl.
tomorrow is a new day, and i am hoping for you guys...
mad-murdock said:
well, even more testing...
my alpharev hboot does support flashing all partitions! great!
i did like its said on the alpharev homepage:
Code:
fastboot flash hboot bravo_alphaspl.img
it said, it worked.
i had an old leedroid backup and found this:
Code:
V:\nandroid\LeeDrOiD 2.2a - 2010-10-14.19.57.06>fastboot flash boot boot.img
sending 'boot' (2944 KB)... OKAY [ 0.564s]
writing 'boot'... OKAY [ 0.816s]
finished. total time: 1.381s
V:\nandroid\LeeDrOiD 2.2a - 2010-10-14.19.57.06>fastboot flash recovery recovery
.img
sending 'recovery' (4608 KB)... OKAY [ 0.636s]
writing 'recovery'... OKAY [ 1.318s]
finished. total time: 1.955s
V:\nandroid\LeeDrOiD 2.2a - 2010-10-14.19.57.06>fastboot flash cache cache.img
sending 'cache' (14 KB)... OKAY [ 0.017s]
writing 'cache'... OKAY [ 0.289s]
finished. total time: 0.306s
V:\nandroid\LeeDrOiD 2.2a - 2010-10-14.19.57.06>fastboot flash data data.img
sending 'data' (113672 KB)... OKAY [ 15.289s]
writing 'data'... FAILED (remote: partition does not exist!)
finished. total time: 15.293s
V:\nandroid\LeeDrOiD 2.2a - 2010-10-14.19.57.06>fastboot flash system system.img
sending 'system' (247291 KB)... FAILED (remote: data length is too large)
finished. total time: 0.005s
so, no system and data partition around - hboot, recovery and boot already reflashed. i also tried the spl with less system and more data bravo_alphaspl-n1table.img - but it doesnt seam to create the partitions if they are missing.
edit: why is fastboot missing in the linux android sdk btw? have to use windows for this...
Click to expand...
Click to collapse
The /data partition is called 'userdata'.
So use 'fastboot flash userdata <img>'.
In regards to the system partition, fastboot has a 220M (about that size) limit.
To overcome this limit (and do all of the above at once):
Zip the images you have:
-boot.img
-recovery.img
-cache.img
-userdata.img
-system.img
Add to this a file called android-info.txt:
Code:
modelid: PB9920000
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__N34
cidnum: HTC__203
cidnum: HTC__102
cidnum: HTC__K18
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__A07
cidnum: HTC__304
cidnum: HTC__016
cidnum: HTC__032
hbootpreupdate:3
mainver: 2.10.405.2
DelCache: 1
Flash the zip using fastboot:
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip <whatever-you-called-it.zip>
Done!
thanks for your reply ieftm. i really was full of hope, that this would work / fix my phone. unfortuatly, it throws an error:
Code:
d:\android-sdk-windows\tools>fastboot flash zip hope.zip
sending 'zip' (220155 KB)... OKAY [ 29.738s]
writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 35.256s
will search the forum now for infos about android-info.txt - do you think, this also would fix the part why clockworkmod cant access the sdcard anymore?
edit: i tried both unix and dos format for the .txt file (crlf vs lf) - both produces the same result
i downloaded RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.exe
i extracted the rom.zip and extracted the android-info.txt - still the same error.
to be honest, i am thrilled to install the RUU and start all over again. but if that fails, i got nothing left - no modified hboot, no clockworkmod
mad-murdock said:
edit: why is fastboot missing in the linux android sdk btw? have to use windows for this...
Click to expand...
Click to collapse
You can get the linux fastboot from here:
developer.htc.com/adp.html#s2
(I'm not allowed to post external links, so I had to remove http)
Solved! Device working again.
|Jason8| -my personal hero for october 2010- told me on irc to check this guide - turns out, things on desire are slightly different.
my problem -for anyone running in similar stuff later- is called usb brick - and the solution for desire is found here
thank you so much |Jason8| - i finally can use my phone again ...18 hours of confusion at an end
This is what i did, use a Micro SD card reader and format your SD card. Here is a link to a formatter, http://www.sdcard.org/consumers/formatter/ then when you double click the sd card on My Computer, it will say you need to format again. Do it and then repartition your SD card. YES, what i did WORKED. because i had the exact same problem.
hope this helps
that wasnt my problem - the sdcard was fine - problem was, i messed up the misc mtd-partition on nand. its solved now - see first page, last post
thanks for your reply anyways ^^

[Q] Can't flash firmware

I'm trying to flash firmware from this thread
http://forum.xda-developers.com/show....php?t=1957376
CID HTC__001
and I'm constantly getting error remote: not allowed
I've followed instructions to the letter
http://www.flow-wolf.net/2012/10/htc-one-x-perfect-guide-for-beginners.html#more
but I'm getting this error every time. Any help appreciated.
Dr. MadMan said:
I'm trying to flash firmware from this thread
http://forum.xda-developers.com/show....php?t=1957376
CID HTC__001
and I'm constantly getting error remote: not allowed
I've followed instructions to the letter
http://www.flow-wolf.net/2012/10/htc-one-x-perfect-guide-for-beginners.html#more
but I'm getting this error every time. Any help appreciated.
Click to expand...
Click to collapse
If you boot your device into bootloader, does it say UNLOCKED at the top? Chances are that it is still locked.
You need to be locked to update firmware.
I don't know if it's necessary but i relocked the bootloader to flash the firmware.
Here are the steps i performed
fastboot oem lock ( to relock the bootloader)
fastboot oem rebootRUU (note the capitals on RUU)
fastboot flash zip nameoffirmware.zip
I then reunlocked and flashed arhd custom rom
Sent from my HTC One X using xda app-developers app
I have S-OFF and for firmware flash you have to bel locked so on top I have ****RELOCKED**** and Hboot is on version 1.12
Got firmware flashed! Now I flashed recovery and when I booted to recovery I only get blank screen. So recovery is up but no graphics.
Please give more info. Does it just sit on a black screen
Is there anything at all on the screen
Does it just flash black and then carry on booting as normal
Sent from my HTC One X using xda app-developers app
When I want to boot recovery it looks like it's booting and then it switches to completely black screen. When I press power button long enough i get three flashes on hard buttons on bottom and then phone powers down.
Below is my whole flashing procedure.
I have firmware for cid HTC__001 got it from here http://forum.xda-developers.com/showthread.php?t=1957376
I took boot image from ARHD 17.1 link and recovery from official link. Did I missed something? or am I doing it in wrong way?
Code:
C:\onex>fastboot oem lock
...
(bootloader) Lock successfully...
FAILED (status read failed (Too many links))
finished. total time: 0.181s
C:\onex>fastboot oem rebootRUU
...
(bootloader) Save data from original MSC...
(bootloader) Save data from SIF...
(bootloader) Update partition data to SIF partition
(bootloader) Update partition data from original MSC...
(bootloader) [MSG] OKAY
OKAY [ 0.346s]
finished. total time: 0.346s
C:\onex>fastboot flash zip firmware.zip
sending 'zip' (12875 KB)...
OKAY [ 1.713s]
writing 'zip'...
(bootloader) shift signature_size for header checking...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 17.005s
C:\onex>fastboot flash zip firmware.zip
sending 'zip' (12875 KB)...
OKAY [ 1.654s]
writing 'zip'...
(bootloader) shift signature_size for header checking...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[boot] unzipping & flushing...
(bootloader) Format partition LNX done
(bootloader) [RUU]WP,boot,100
(bootloader) start image[recovery] unzipping & flushing...
(bootloader) Format partition SOS done
(bootloader) [RUU]WP,recovery,100
(bootloader) ERASE backup cid
OKAY [ 2.712s]
finished. total time: 4.366s
C:\onex>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.153s]
finished. total time: 0.153s
C:\onex>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.029s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
FAILED (status read failed (Too many links))
finished. total time: 5.878s
C:\onex>fastboot flash recovery recovery-clockwork-touch-5.8.4.0-endeavoru.img
sending 'recovery' (5742 KB)...
OKAY [ 0.830s]
writing 'recovery'...
(bootloader) Format partition SOS done
OKAY [ 0.571s]
finished. total time: 1.401s
C:\onex>fastboot flash boot boot.img
sending 'boot' (5192 KB)...
OKAY [ 0.672s]
writing 'boot'...
(bootloader) Format partition LNX done
OKAY [ 0.572s]
finished. total time: 1.244s
C:\onex>fastboot erase cache
erasing 'cache'...
OKAY [ 0.210s]
finished. total time: 0.210s
mhm...
looks fine.
maybe the download of the recovery is defect or corrupt. did you try to download the recovery again and install it?
If I flash same recovery file when I have stock RUU 2.17 on phone it boots normally. So the file is OK.

[Q] Restart when system start run

I have I bought Droid Incredible ( Refurbished ) from ebay.com
when system start run Its turn off , sometime turn off befor system start
I have change many root but still problem
I have two phones same problem
How can fix it ? Plz help me
Check through the recent boot loop/hboot threads about how to run an ruu using a PB31IMG.zip.
Sent from my Galaxy Nexus using Tapatalk 2
I did with this one ( mediafire.com/?uvha2u2pv3xp8d5[/url] )
But same problem
Can give me link for another to try plz
Pvillecomp.com. it should have all but the newer files. Try the froyo or gingerbread ruu there and read the help on the site. If you're still confused you can come back and ask questions. Also please report on your progress if you hit any issues or are successful.
Sent from my Galaxy Nexus using Tapatalk 2
I did with froyo and gingerbread , but problem still :crying:
copy of screen in attach
apas100 said:
I did with froyo and gingerbread , but problem still :crying:
copy of screen in attach
Click to expand...
Click to collapse
Try this ruu http://dinc.does-it.net/Stock_Images/4.08.605.15/PB31IMG.zip.
I did but same problem
I think is some wrong with me ,S still on , need I make it off ?
After i do it i got this message "No image or wrong image!"
Plz check photos in attachments
apas100 said:
I did but same problem
I think is some wrong with me ,S still on , need I make it off ?
After i do it i got this message "No image or wrong image!"
Plz check photos in attachments
Click to expand...
Click to collapse
Try reformating your sdcard fat32 with a pc. Then place only the ruu on the sdcard and try again. Sometimes that gets it to work.
My sdcard is FAT32 , I'm tired with it
When I try do it with android-sdk I get "FAILED (remote: not allowed)"
apas100 said:
My sdcard is FAT32 , I'm tired with it
When I try do it with android-sdk I get "FAILED (remote: not allowed)"
Click to expand...
Click to collapse
Even though its already fat32, sometimes reformating it gets it to work.
If your getting the remote not allowed message, it means the bootloader is still locked.
cmlusco said:
Even though its already fat32, sometimes reformating it gets it to work.
If your getting the remote not allowed message, it means the bootloader is still locked.
Click to expand...
Click to collapse
I have unlock bootloader by htcdev.com , It's unlock now , u can see photos in attachments
Is there other reason !
apas100 said:
I have unlock bootloader by htcdev.com , It's unlock now , u can see photos in attachments
Is there other reason !
Click to expand...
Click to collapse
Thats strange, with the bootloader unlocked you should have no issues fastboot flashing cwm recovery. Download this file http://dinc.does-it.net/Guide_Root_New_Hboot/recovery.img, and place it on your pc in the same folder as fastboot.exe. Open a cmd prompt with the phone connected. The phone should be in hboot and say fastboot usb plug in red at the top. Type " fastboot flash recovery recovery.img ".
It's working fine with recovery
----------------------------------------
sending 'recovery' (3064 KB)...
OKAY [ 0.519s]
writing 'recovery'...
OKAY [ 0.994s]
finished. total time: 1.534s
-----------------------------------------
But with ruu isn't work
----------------------------------------
sending 'zip' (126494 KB)...
OKAY [ 19.493s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 19.517s
-----------------------------------------
apas100 said:
It's working fine with recovery
----------------------------------------
sending 'recovery' (3064 KB)...
OKAY [ 0.519s]
writing 'recovery'...
OKAY [ 0.994s]
finished. total time: 1.534s
-----------------------------------------
But with ruu isn't work
----------------------------------------
sending 'zip' (126494 KB)...
OKAY [ 19.493s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 19.517s
-----------------------------------------
Click to expand...
Click to collapse
Try this one line at a time:
fastboot erase cache
fastboot oem rebootRUU
Wait for hboot to load.
fastboot flash zip PB31IMG.zip
hisnededsp
This what i got
sending 'zip' (185063 KB)...
OKAY [ 27.941s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 31.433s
apas100 said:
This what i got
sending 'zip' (185063 KB)...
OKAY [ 27.941s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 31.433s
Click to expand...
Click to collapse
That sounds like a bad download/corruption of the PB file, or the version of ruu you are trying to flash is older than the version on the phone. Try this one http://dinc.does-it.net/Stock_Images/4.08.605.15/PB31IMG.zip
---------- Post added at 04:36 PM ---------- Previous post was at 04:34 PM ----------
Wait i forgot what are we trying to acomplish here lol. Are you just trying to go back to stock, downgrade, flash a rom ...?
This what I got
sending 'zip' (185063 KB)...
OKAY [ 27.777s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 31.250s
up

[Q] m8 possibly corrupt hboot

Hi
I am not really sure what i have done wrong here, but i have got myself to a stage where i can get to fastboot, but i cannot get to the recovery, if i select hboot then i get the following:
TWRP: teamwin screen flashes a couple of times then the device reboots
CWM: black screen the the device reboots
Stock recovery: android driod with a red exclamation mark then the device reboots
I have tried multiple recovery's as you can see.
I know that i am currently in a state where i have NO os on the phone.
**TAMPERED***
***UNLOCKED***
M8_UL PVT SHIP S-ON
HBOOT-3.16.0.0000
RADIO-1.14.2133156.UA24G
OpenDSP-v26.2.2-00538-M8974.0106
OS-
eMC-boot 2048MB
Feb 26 2014,21:38:56.14307
This all started when i somehow got in a reboot loop when SuperSU tried to push the su binary to TWM.
Any help or directions to get me back ontrack would be appreciated.
Thanks
Darren
--
addition, just following some instructions about restoring to stock boot, recovery and rom from android reolution, output below:
C:\Users\darrend\Desktop\s-off\platform-tools>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.015s]
finished. total time: 0.015s
C:\Users\darrend\Desktop\s-off\platform-tools>fastboot flash boot boot.img
target reported max download size of 1830711296 bytes
sending 'boot' (8262 KB)...
OKAY [ 0.971s]
writing 'boot'...
OKAY [ 0.666s]
finished. total time: 1.638s
C:\Users\darrend\Desktop\s-off\platform-tools>fastboot flash recovery recovery
mg
target reported max download size of 1830711296 bytes
sending 'recovery' (15236 KB)...
OKAY [ 1.605s]
writing 'recovery'...
OKAY [ 0.992s]
finished. total time: 2.599s
C:\Users\darrend\Desktop\s-off\platform-tools>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.016s]
finished. total time: 0.017s
C:\Users\darrend\Desktop\s-off\platform-tools>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.015s]
finished. total time: 0.016s
C:\Users\darrend\Desktop\s-off\platform-tools>fastboot -w
erasing 'userdata'...
FAILED (remote: not allowed)
finished. total time: 0.020s
C:\Users\darrend\Desktop\s-off\platform-tools>fastboot flash update update.zip
target reported max download size of 1830711296 bytes
sending 'update' (1387053 KB)...
OKAY [ 59.626s]
writing 'update'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 137.319s
Try fastboot erase cache

WLAN does not work after 4.4 Update

Hey Guys,
i wanted to upgrade my HTC One M8 to the newest T-Mobile Germany Firmware. My HTC One was rooted and I had the TWRP Recovery with ViperRom.
I installed a Nandroid Backup with the 1.12.111.18 (4.3) Firmware. After that i installed the 1.57.111.2 Stock Recovery, than I relocked the Bootloader and after the Root was gone, I updated my Phone to the 1.57.111.2 (4.4.2), and now my WiFi is not working. I even upgraded to a newer Version of the Stock Recovery, but it still not working.
Here are some Information about my Phone.
HBOOT-3.18.0.0000
RADIO-1.19.21331147A1.09G
OS-
CIDNUM: T-MOB101
If you guys, need some other Information. Just let me know.
lepush said:
Hey Guys,
i wanted to upgrade my HTC One M8 to the newest T-Mobile Germany Firmware. My HTC One was rooted and I had the TWRP Recovery with ViperRom.
I installed a Nandroid Backup with the 1.12.111.18 (4.3) Firmware. After that i installed the 1.57.111.2 Stock Recovery, than I relocked the Bootloader and after the Root was gone, I updated my Phone to the 1.57.111.2 (4.4.2), and now my WiFi is not working. I even upgraded to a newer Version of the Stock Recovery, but it still not working.
Here are some Information about my Phone.
HBOOT-3.18.0.0000
RADIO-1.19.21331147A1.09G
OS-
CIDNUM: T-MOB101
If you guys, need some other Information. Just let me know.
Click to expand...
Click to collapse
Are you S-Off? You can't revert to older firmware while you are S-On.
xunholyx said:
Are you S-Off? You can't revert to older firmware while you are S-On.
Click to expand...
Click to collapse
I'm on S-On, but I want to install a newer Firmware not downgrade to an older one.
This is what I get when I try to install the OTA Update
Code:
xxx-imac:~ x$ cd Desktop
xxx-imac:Desktop xxx$ cd adb
xxx-imac:adb xxx$ ./fastboot devices
HT459WM15609 fastboot
xxx-imac:adb xxx$ ./fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.010s]
finished. total time: 0.010s
xxx-imac:adb xxx$ ./fastboot flash zip OTA_M8_UL_K44_SENSE60_SECURITY_TMO_DE_1.70.111.1-1.57.111.2_release_383280.zip
target reported max download size of 1830612992 bytes
sending 'zip' (253074 KB)...
OKAY [ 9.223s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 9.713s
And when I try to get to the Stock Recovery, I get the HTC One Icon with the red triangle
This is what I get, when my Bootloader is relocked
Code:
xxx-imac:adb xxx$ ./fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.010s]
finished. total time: 0.010s
xxx-imac:adb xxx$ ./fastboot flash zip OTA_M8_UL_K44_SENSE60_SECURITY_TMO_DE_1.70.111.1-1.57.111.2_release_383280.zip
target reported max download size of 1830612992 bytes
sending 'zip' (253074 KB)...
OKAY [ 9.539s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 19.701s
xxx-imac:adb xxx$

Categories

Resources