Review: 2A wall/car dual chargers from iSmooth - General Accessories

Yep, it's the same iSmooth known for their screen protectors At first I was very skeptical because they are listed for Apple products, both dual port chargers with 2.1A and 1A - typical for iPad and iPhone/iPod devices. While talking to Paul, the guy behind iSmooth, he mentioned about using it to charge his Note 2 without any issues.
I got both of them, and can report they work perfectly with our Note 2. I can use either 2A or 1A ports to charge GN2 while still have other port used by another device, either android or apple. So functionally it definitely works. Another thing I noticed, 2A port charges the phone pretty fast, and when I connected iPod Touch to 1A port, the charge rate seems to be relative the same which suggests they don't share load where with some other chargers both ports are forced to 1A.
The construction of both is very solid, these are not cheap plastic chargers. Wall charger actually has substantial weight which suggest quality electrical components. Both have white/black theme, works with my UAG Navigator lol!!! Wall charger has a blue light indicator while car charger has a glowing blue ring. I tried capturing everything in picture details below. One thing that makes it unique, wall charger has a release latch to remove the electric plug. Once you do that, you have symmetrical 2-pin universal plug you can find on a ton of your devices around the house, like laptop ac-adapter or printer plugs. I actually used one from my laptop ac-adapter (not included with wall charger, obviously), but still a neat idea for extension cord. if your electrical outlet far away. But in general, wall plug is very slim and should fit without obstruct any other device plugged next to it.
The only drawback, wall charger is sold out on Amazon and I have been told it will take a few months before its back in stock. Oh, also forgot to mention - both wall and car charger come with 10 year free replacement guarantee. That is insane confidence of the product quality.
Ok, so here are the pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

Review of Anker 25W (5V x 5A) 5-port wall charger w/lots of pics!!!

This is a review of Anker 25W, 5V x 5A, 5-port usb wall charger. http://www.ianker.com/product/71AN25W-W5A
Sometimes you look at the product and think, how come nobody released something like this already? And when it looks so compact and elegant, it adds to the value of it. We all probably got multiple "smart" devices in our home, phones, tablets, wireless speakers and headphones. Each one comes with a dedicate wall charger. Sure, you can use double port wall chargers, even as compact as Anker 3.6A 2-port charger I reviewed before, but beyond 2 ports you don't have too many choices.
This 25W 5-port charger is really compact. We are talking about 3.6" x 2.6" x 1" durable box with 5 full size usb faceplate connectors. With a weight of under 160g its light for traveling, and the AC input cable has it's own velcro strap. The spec is very simple, you get a total of 5A of current combined from all 5 ports. Every port is labeled with a specific designator for either Android or Galax Tab or iPad or iPhone. Since I don't have any iProducts, I don't have test results for it. But from previous experience, Anker always confirmed that if iPad label is present - it will charge latest iPad at full speed. I tested all 5 ports with my Note 2 and it was charging without a problem. As a a matter of fact, i had Note 2 plugged in and verified to be charging at full 2A speed, and had two Nexus 7 tablets charging along (while those are typically 1A each).
Overall its a great device and for $19.99 a great value! I noticed that Amazon says it will be back in stock on September 12th, so I guess there is already demand for it (no surprise). I was able to clean up my desk from multiple wall chargers and power strip just with this one little guy. Also don't forget, all Anker stuff comes with 18-months warranty and support they really stand behind!
Here are the pics.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[REVIEW] Vinsic USB Wall Charger 12W Dual Port 5V 2.4A

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DEVICE SUMMARY
Made by Vinsic
2.4A USB Charger, built with two specialized ports to charge your devices simultaneously at full speed.
12W, compatible for Smartphones, Cell phones, MP3/MP4Players, Game Devices, GPS Devices, ereaders, and other digital devices.
High quality, safety, built-in circuitry protects your device from over-charging.
Highly durable ABS plastics, relatively good charging performance, whilst reducing heat generation.
Compact size and lightweight, design for using on the go and in home.
IMPRESSIONS
This charger blew the socks off my OEM charger. I got it when I had my HTC One M7 and the charger that came with that phone did an okay job - but it was more like a trickle charge. When using this charger, I was able to get a full charge from an almost drained battery in about 2 hours. And it was roughly the same time to charge both my wife's Samsung S4 and my M7 at the same time. :highfive:
This charger is great. It has two ports and it is has good build quality. I have been using it now for a few months and it is still going strong and charges my Nexus 6 great when I don't want to use the insanely fast turbo charger.
Not quite sure what the "Smart" port is for - the box did not come with a description on that.
RECOMMENDED
I would recommend anyone in search of a USB wall charger to purchase this product. I have used OEM chargers, and cheap replacement ones, and this one beats all the ones I've owned, hands down.
Will this work with a Kindle?
"Smart" USB chargers include solid state logic with serial communications chips. When you plug in a device that wants higher current, it sends a query to the power supply saying something to the effect of "I want 2 amps. Is that OK?" If the power supply is a dump USB port, it doesn't answer at all, so the device either doesn't work, or only draws the default 500 mA (and charges much more slowly.)

Review: LDesigns Wireless Charger

This is a review of a wireless charger from LDesign - http://www.amazon.com/Upgraded-Wireless-Charger-Charging-Motorola/dp/B015S8TXJC/
So I've personally never bothered to use QI wireless chargers for my phone, and the only device I own that support QI is my smartwatch. After the charger for my smartwatch, Motorola Moto 360, did throw in the towel I was on the lookout for a decent one to replace it. I came across many different ones, but one that really caught my eye was the one from LDesign.
The charger itself came in a pretty ordinary packaging that felt a little bit thin, and on the actual box there were a few specifications as well as information about the product. Inside the box is the charger, as well as a plain micro USB and a manual.
So when it comes to the actual charger, it looks pretty nice and feels solid compared to some other alternatives I’ve seen. The charger itself is partially made out of transparent plastic, which does glow up with a blue light when putting an QI capable device on it - this is great as the blue light makes it easier to see if the charger is actually charging the phone. There’s some rubber as well, so you don’t have to worry about your phone or device slipping off the charger when charging.
The charging performance is about as good as the original Moto 360 charger, but I was unable to measure the exact output of the charger. The charger doesn’t get hot while charging, and I’ve had no issues with its range either – for some reason I can even charge my Moto 360 with the strap in-between the device and charger. The only negative aspect is that the entire charger isn’t capable of charging, and just the square in the middle can be used for charging.
Pros:
Good design and it looks great on my desk.
Decent charging performance paired with my Moto 360
Rubber around the charging area so that the device doesn’t slip off.
Cons:
Not the entire charger can be used for charging
Note that the product was sent to me in exchange of this review, based entirely on my own opinion and experience with the product.
Picture of the charger:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nylon USB Cables

Hi,
My Samsung and apple usb chargers are absolute crap so I was looking at these new Nylon braided USB cables which are:
- at least 2x in length;
- much more durable;
- boast that they charge and sync at 2.4A which is significantly higher than the stock samsung and apple chargers.
Pretty sure you can buy reversible and micro USB cables also.
Has anyone had experience with these?
Here's an example product I found which seems great in value and holds the above specs:
http://www.amazon.com/Ace-Teah-Universal-Braided-Charger/dp/B013E2KT4M/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my Samsung and apple usb chargers are absolute crap
I use a samsung 2 Amp charger, which has a usb socket in it – for charging my table and/or mobile phone. What do you mean crap? I haven't had one fail, and works as expected. So is this thread relating to the charger itself? Or relating to usb cables? For my charger, the charger has a usb socket – so you could put whatever kind of cable you want on it.
DO ...NOT ...BUY
I have had several ...
1. The contact is poorly molded. The micro-usb contact will soon pop out of the mold and break off.
2. The sleeve does nothing at all. It just looks cool.. the poor way the cable and contacts is molded it does not make the cable stronger.
3. Even how much the information emphasize that the cable can transfer more amperes this is not the case... All sleeve kind of usb cables I have had stalled at about 450mAh.
The best cables are the one that is not fitted with "bling bling" all around or brag about its quality.
I recommend you to instead buy a classic cable http://www.monoprice.com/product?c_id=103&cp_id=10303&cs_id=1030307&p_id=5458&seq=1&format=2
This has:
Ferrite Core. Most people doesn't know what this round brick around the cable does anyway..
28/24AWG ..you can bend it all you want. It won't break. Also allow for more current to pass.
Gold plated. Does nothing but looks good..it will scratch off after a month from inserting and removing.
Note: The cables from monoprice isn't something special. They are only a retailer. The cables are manufactured in china.
It is a very nice usb cable. I had it for days and still works great.

UGREEN USB-PD 30W Charger + Type-C Braided Cables - Unboxing and Review

After having tested the Quick Charge 3 chargers, it is time to test the USB-PD ones. This model in particular is the 30W variant with 1x Type-C Output.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Starting from the materials, the charger feels pretty solid with no glossy parts.
For best results, i have combined this charger with 2x Type-C to Type-C cables from the same brand, and the quality is excellent with a thick braided cable and metal shielded plugs. Unfortunately this charger doesn't include any Type-C cable.
Its power output looks to be as good as it should be, and my Essential Phone PH-1 was able to charge at lightning fast speeds with no issues. Unfortunately i am not able to show any voltage output for this because my USB Tester doesn't support USB-PD.
I am going to add more details about this test as soon as i get my hands on a new USB Tester.
As regards the Type-C cables instead, i am kinda disappointed. 4.62v for a 3A load is quite low, and this is the shorter variant. Basically, the thickness mentioned before is probably only due to the braiding and not to the internal wires (20AWG declared, i have some doubts about this). This test has been made using the Quick Charge Charger already tested previously. (link: https://forum.xda-developers.com/general/accessories/ugreen-4-ports-desktop-charger-quick-t3830526)
So, apparently this is a placebo, since again i can say that the charger is great thus i can recommend it, but i can't recommend any of those cables due to high resistance of them.
Rating (Charger): 8.5
Product Webpage: https://www.ugreen.com/product/1417-en.html
Rating (Cables): 6
Product Webpage: Apparently not available for this precise model​
Nice review that u have but I think there's only a small users whose gonna buy this kind of charger
Can you help us by telling how much battery was charged in how many minutes and was that result obtained when you were using the phone (light usage like watching media etc) or switched off state or was it when screen was not lit?

Categories

Resources