it shows on the status bar but it dont conect when i give the comand, it keeps that little circle there,
i also check if the fast charge was on but it is not, reboot nothing, and when i TRY to conect it dont recognize the internal or external sd, so i have to reboot to acess my data, games foto music etc...
plz, plz plz
i need help tomorrow i have to fly to lissabon and i will be long time with no chance to stop for hours in front the computer to pristine...
edit:
sorry my bad, i am using hakin rom 3.0 with chronos kernel no tweaks in the moment, start when i conected the usb with the fast_charge on, i firget to turn it off, i open the terminal and turn it off with the usb cable in...
he still dont recognize, take out the cable put it again and the phone recognize the computer but when i togle on he keep runing and never plug, after he dont read the memorys anymore, no loading data from games or anything...
i tried to work it out and i have no time to re-run pristine again, i travel this nigth 4am...
plz lovely developers plz...
everyone will confused with your statement.
you should describe more details. what rom you'r using. what tweaks you have added. what beginning when those problem happen.
sorry my bad, i am using hakin rom 3.0 with chronos kernel no tweaks in the moment, start when i conected the usb with the fast_charge on, i firget to turn it off, i open the terminal and turn it off with the usb cable in...
he still dont recognize, take out the cable put it again and the phone recognize the computer but when i togle on he keep runing and never plug, after he dont read the memorys anymore, no loading data from games or anything...
i tried to work it out and i have no time to re-run pristine again, i travel this nigth 4am...
plz lovely developers plz...
disable ADB and see if it will work for you
in my device ,, no need to disable adb,,
just goto settings> storage> Press the left soft touch key> USB computer connection> connect as Mass stoage..be sure its checked
when i conect the cable the phone recognize and i can go to usb mass storage, when i togle the buton he dont conect with the computer
both didnt work... :-/
Related
My Pda 2k device i tryed to upgrade it from 2003 SE to 2k5 after pressing update the device restarted gived me a gray screen and typed on it seril and at the buttom v2.02 now i cant open the device each time i reset or heard rest this is the only screen appears to me i cant even connect to activsync please i need your help what to do to get my device back, this error message i recived (usb device not recognized aslo active sync didnt recognize it)
i need to add a point the device is not working on the USP connection as it have a problem only serial port to connect with the pc
i'm so new here please help me
not to worry.. you can perform a hard reset of your 2k3 version "power+reset" to get you back to at least a working device.. I have been through this and have had this happen to me as well.. try entering bootloader again "power+record+reset" and dock it fairly quickly and it should change to USB on the screen and PC recognize it... also for anyone reading this.. I would highly recommend plugging your cradle into a 5v power supply as I can only imagine most of the bricked BAs are probably due to a computer freezing and/or the PC shutting down power to the USB port only for a fraction of a second and hosing the flash up.
THx Man i will try i hop this will work :lol:
I was trying to put the hum/hiss sound fix on my sd card and I cannot get my pc to connect via USB...
My wife has a TP2 and it connects fine...
I have tried with/without the sd card in, rebooted the pc and phone, rebooted the phone while connected to the pc.... nothing...
wtf...
anyone else with this problem?
PS... NRGZ28 had posted a very basic rom for booting to android back in Feb and it is now gone from hotfile. Anyone know of a quick boot into android?
- Try a different computer
- Try a hard reset
That are the first thing you should do.
Tried hard reset...
Dif PC is not an option at the moment... I have rebooted...
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
FarBeyond said:
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
Click to expand...
Click to collapse
Reboot your PC? lol bet your tried that already...
Try this:
settings > connections > usb to pc > and disable Faster Data Sync then try. This way uses the generic usb drivers and maybe it will connect.
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
FarBeyond said:
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
Click to expand...
Click to collapse
dont think thats working yet
Ya I don't think that works yet, it's tied to Android software drivers and the use of the USB port, since there is no drivers to control the port only to charge battery. Windows thinks there is something there, but the phones USB can't communicate back....I think this is the issue or at lease after playing around with it on my phone anyway
Not that it's a huge amount of help but might troubleshoot down to the hardware level...if you go into bootloader mode on the phone and connect to USB does it connect?
I don't think you should go that deep and dirty. My touch pro 2 works only with only 1 (non-HTC) cable of the 10 i have at home, all are the "standard" mini-USB but only one works flawlessly for communicating/flashing/syncing, the other cables either do the same error - device not recognized - or windows says that the device could communicate faster - and only copies files slowly.
All in all: you should simply check with another USB cable or if you have the factory HTC cable try it with that. I noticed that the cable i am using other than the HTC one is a very good quality thick (low-resistance and double-shielded) USB cable and it never failed on me.
One other thing you should definitely watch for: plug the USB cable into the motherboard USB port directly (on the back of the PC where you plug the keyboard, mouse etc.), sometimes PC cases with front panel USB outputs simply die, or are wrongly attached to the motherboard USB header and it can cause the aforementioned problems too, not to mention if it is wrongly attached it could harm your phone too.
Hi,
Apparently I can not post on the appropriate thread, so I'll have to create a new thread here.
I'm using the latest CM v7.0.3 rom and the "connect to pc" menu is missing. No "mount as harddisk", no "charge only". I can not access my SD card from the pc at all. Am I missing something? Reboot and/or connecting and disconnecting my device multiple times to different PCs didn't help either.
Thanks for any help,
- McManiaC
Umm, when you connect your phone via usb to the pc, the usb icon and usb connected msg should popup, slide down the status bar, tap the usb connected notification and then pick turn on usb storage , the phone is already charging when connected to usb so you don't get that charge only option
Well yes, that's what it should be like - but exactly that notification is missing. It's been there in previous versions of CM/HTC Sense, but I don't get that pop-up in the latest CM703...
usb / connect to pc menu missing
i have the same problem on my legend with CM710 stable...
i remember this option was there (and a menu popped up when you plugged it in) but now it is not there anymore and nothing happens when i plug it in (windows: usb dev not recognized, ubuntu doesnt even recognize any usb device)... although the phone continues to charge...
i suspect that i might have done a factory reset or something after which this problem started... (or i may have disassembled the phone to replace the touchscreen/lcd... but has been carefully reassembled and everything else works fine..)
even tried to recover to old backups, flashing the rom again but nothing happens, still no connect to pc menu in settings nor does pluggin it in works...
gonna try to flash a stock froyo rom and see what happens..
if i am missing anything then please let me know...
Hey
I updated my phone yesterday and now it won't charge anymore.
BUT when it is connected to a power source I can use it .. till I unplug it.
I tried to update it again (15mb update) but it just says the accu is too low and I need a power source.
I've no idea what to do anymore.
Can someone help me? :<
Greetings
/e I cant even save my files because even though I can use it while the phone is plugged in to my PC I can not access the internal SD..
My symptoms are here :
1) wont charge on AC or USB when power on ( no charging animation) !!!! ***But it charges when power completely off*** (got icon charging at centre of the screen)
2) wont being recognised by PC at all (cant access) shows unrecognized device at all time
**weird thing is when i plug to my laptop USB2.0 port it shows nothing (like nothing connected) , only shows device not recognized when i put it in USB3.0 port **
I ve done many researched and did following steps with unsuccessful result :
1) Factory reset for multiple times .
2) Already did force driver install but wont install at all **Naked driver, google driver, samsung driver, PDAnet driver.... (already disable force driver signature in windows 8)
I have no idea at all now someone plz help me ??? appreciate it , thanks in advance ...
Note :
This nexus running stock 4.3 (never rooted) .
It was fully working with connect to PC (MTP) and can show USB connected and Debugging on when pull down the notification bar , few minutes ago TT
EDIT:
Its not charging even though when power off , its just showing charging icon but not charge .
(i power off when 80% , after an hour i power on back , its still 80%)
sumyt said:
My symptoms are here :
1) wont charge on AC or USB when power on ( no charging animation) !!!! ***But it charges when power completely off*** (got icon charging at centre of the screen)
2) wont being recognised by PC at all (cant access) shows unrecognized device at all time
**weird thing is when i plug to my laptop USB2.0 port it shows nothing (like nothing connected) , only shows device not recognized when i put it in USB3.0 port **
I ve done many researched and did following steps with unsuccessful result :
1) Factory reset for multiple times .
2) Already did force driver install but wont install at all **Naked driver, google driver, samsung driver, PDAnet driver.... (already disable force driver signature in windows 8)
I have no idea at all now someone plz help me ??? appreciate it , thanks in advance ...
Note :
This nexus running stock 4.3 (never rooted) .
It was fully working with connect to PC (MTP) and can show USB connected and Debugging on when pull down the notification bar , few minutes ago TT
EDIT:
Its not charging even though when power off , its just showing charging icon but not charge .
(i power off when 80% , after an hour i power on back , its still 80%)
Click to expand...
Click to collapse
It definitely sounds like a driver issue. Have you tried connecting it to another PC?
If it works on another PC then you should be able to determine that your laptop is the issue.
Have you tried uninstalling whatever driver it's using from device manager?
edit: Didn't see your edit. Could also be the cable.