Develop Bugs

quadrant score :(

Bad quadrant score 860

How is that bad, it's as fast as the galaxy s according to the scores.
Sent from my HTC Wildfire S using XDA App

With improvements to CM7, a custom kernel and overclocking to 750 mhz, this device will be even faster.

My score wasn't even that high

try this here http://forum.xda-developers.com/showthread.php?t=1283665

jikantaru said:
try this here http://forum.xda-developers.com/showthread.php?t=1283665
Click to expand...
Click to collapse
doesnt work

Benchmark Challenge? (Bored with nothing better to do)

As of today I'm the fastest.....I don't like quadrant much...post your score and combination (if you want)
sent from the fastest antutu epic in the country

RaydenEris said:
As of today I'm the fastest.....I don't like quadrant much...post your score and combination (if you want)
sent from the fastest antutu epic in the country
Click to expand...
Click to collapse
Try and burn this muahahahahahaha

Uhh wow is that on a sph d700? Cause I don't see that score in the ranking .... I'd be curious as to what YOUR setup is.
What version/benchmark is that on?
sent from the fastest antutu epic in the country

RaydenEris said:
Uhh wow is that on a sph d700? Cause I don't see that score in the ranking .... I'd be curious as to what YOUR setup is.
sent from the fastest antutu epic in the country
Click to expand...
Click to collapse
Its not its a g2 only thing I know that will score so high in cpu and achieve 5200+ without an i/o hack... however I missplaced my screenshot of my phone at 4504
Sent from my SPH-D700 using xda premium

Biggoron said:
Its not its a g2 only thing I know that will score so high in cpu and achieve 5200+ without an i/o hack... however I missplaced my screenshot of my phone at 4504
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I've glitched my phone before haha. i once got 140 MFLOPS in linpack haha.
But yes a G2 would normally hit that range.
RaydenEris said:
Uhh wow is that on a sph d700? Cause I don't see that score in the ranking .... I'd be curious as to what YOUR setup is.
What version/benchmark is that on?
sent from the fastest antutu epic in the country
Click to expand...
Click to collapse
Its Quadrant Advanced and my Setup is:
CM7 Nightly 16
Samurai Seppuku
1.5GHz 400MHz Gpu OC

I'm at 4137 on antutu with no hack just cm7 and Sammy's Ronin7 at 1500
sent from the fastest antutu epic in the country

Here it is!
Too bad I never did antutu when my phone was setup like this.... otherwise it would have put that 4137 to shame
Sent from my SPH-D700 using xda premium

Good for me I can hold the title for a day or two
sent from the fastest antutu epic in the country

What's funny is that once I switched to mtd I can't get my quadrant benchmark past 3000 no matter what I do . I used to get 3500 4000 on lengendary rom with minor tweaks and no real hacks ...being a noob and all ... anyone know the deal?
sent from the fastest antutu epic in the country

RaydenEris said:
What's funny is that once I switched to mtd I can't get my quadrant benchmark past 3000 no matter what I do . I used to get 3500 4000 on lengendary rom with minor tweaks and no real hacks ...being a noob and all ... anyone know the deal?
sent from the fastest antutu epic in the country
Click to expand...
Click to collapse
It deals with the kernel.
Listen Samurai may not show benchmark scores up high but it performs better trust me. a score is a score nothing real.

RaydenEris said:
What's funny is that once I switched to mtd I can't get my quadrant benchmark past 3000 no matter what I do . I used to get 3500 4000 on lengendary rom with minor tweaks and no real hacks ...being a noob and all ... anyone know the deal?
sent from the fastest antutu epic in the country
Click to expand...
Click to collapse
I/o fattening script was taken out of his kernels to get rid of the crap it was doing... that's why its not a hack but was making the i/o get all the scoring now its just pure samurai thus the 3000
Sent from my SPH-D700 using xda premium

Gotcha! .... any cm7 mtd kernels that pop like that?
sent from the fastest antutu epic in the country

Nope they all have left the i/o inflators out...
Sent from my SPH-D700 using Tapatalk

I hit 4.3k with an inflater oc'd to 1.65 and ext4 no journaling
Sent from my SPH-D700 using Tapatalk

ugothakd said:
I hit 4.3k with an inflater oc'd to 1.65 and ext4 no journaling
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Still gotcha beat 4504
Sent from my SPH-D700 using xda premium

I got 5k before
Sent from my SPH-D700 using Tapatalk

@marcusant....I'm a big fan of the v3 keep up the good work!
All in all I'm at 4100+ on antutu I think I still have the title on that benchmark for the epic, that's me at 4137 ;-) pics forthcomming. Still a noob trying to post pics to this forum from my phone.
My quadrant standard is at 2800 (which is mos def not the highest score but its a legit 2800-2900) and my linpack is at 26.5 on average. And its a daily driver I save battery by using an app called 2x battery, it kills the data connection when the screen is off, it helps a little. I. Don't believe in profiles on voltage control or set cpu.
sent from the fastest antutu epic in the country

Undervolting//how low can your phone go :D

just a little information/ competition to see which SGS2 is the best , i want to see how low of a voltage you can go. I am using Stability test to test out the voltage, 3 round of classic test at 1.73ghz at 1125mV, and it stable, a little scare to go down more but here some info on my SGS2
running
beastmod 4.2
kernel 2.3.6
Was running originally at 1175 but i undervolt to 1125 and running stable at a stable temp of 41-42..
what's yours

be careful with such drastic undervolting at those frequencies, could result in corrupt nand.

G1_enthusiast said:
just a little information/ competition to see which SGS2 is the best , i want to see how low of a voltage you can go. I am using Stability test to test out the voltage, 3 round of classic test at 1.73ghz at 1125mhz, and it stable, a little scare to go down more but here some info on my SGS2
running
beastmod 4.2
kernel 2.3.6
Was running originally at 1175 but i undervolt to 1125 and running stable at a stable temp of 41-42..
what's yours
Click to expand...
Click to collapse
This isn't undrevolting..... this is underclocking.
Undervolting is pretty dangerous with trial and error. The lowest I'll go is -75.
And my frequencies at min 384 and mas 1350 ondemand
Sent from my SGH-T989 using xda premium

xxKamikazexx said:
This isn't undrevolting..... this is underclocking.
Undervolting is pretty dangerous with trial and error. The lowest I'll go is -75.
And my frequencies at min 384 and mas 1350 ondemand
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
no underclocking meaning i would use less ghz than the stock, this is minimizing the voltage on the core.
what your doing is underclock, i put mine fixed on 1.73ghz at 1125mV of voltage

icenight89 said:
be careful with such drastic undervolting at those frequencies, could result in corrupt nand.
Click to expand...
Click to collapse
I have never heard of such thing, i'm not doubting you but from over the years, i heard undervolting have positive affect on the CPU by lowering temp and give battery more juice.
where did you get those facts from?

G1_enthusiast said:
no underclocking meaning i would use less ghz than the stock, this is minimizing the voltage on the core.
what your doing is underclock, i put mine fixed on 1.73ghz at 1125mV of voltage
Click to expand...
Click to collapse
Ohhhh my mistake, I didn't catch the mv after the 1125 lol that's why I thought you were only messing with ghz ha ha ha
Sent from my SGH-T989 using xda premium

xxKamikazexx said:
This isn't undrevolting..... this is underclocking.
Undervolting is pretty dangerous with trial and error. The lowest I'll go is -75.
And my frequencies at min 384 and mas 1350 ondemand
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
As far as I know, there are no dangers associated with undervolting. I run at those frequencies too at -112.5 and have never had a problem of any sort.

I run about 1ghz. No under volt with this ics kernel but with my old gb kernel I undervilted with faux -100 at 1ghz...ran cool even with games and video, great battery life. And honestly 1ghz is plenty for snappy fast speed
Sent from my SAMSUNG-SGH-T989 using XDA

i also run 1ghz, runs super smooth across the board

zander21510 said:
I run about 1ghz. No under volt with this ics kernel but with my old gb kernel I undervilted with faux -100 at 1ghz...ran cool even with games and video, great battery life. And honestly 1ghz is plenty for snappy fast speed
Sent from my SAMSUNG-SGH-T989 using XDA
Click to expand...
Click to collapse
How did you undervolt by -100?

yoft1 said:
As far as I know, there are no dangers associated with undervolting. I run at those frequencies too at -112.5 and have never had a problem of any sort.
Click to expand...
Click to collapse
I don't know if you're familiar with overclocking, but the same type of stability issues can occur. When you're undervolting you can think of your stock speed as an "overclock" and you're just trying to minimize the voltage necessary for stability. If you undervolt too much you can experience freezing, corruption, bad lag, etc. It's all the same process for desktop computers, laptops, and anything else you can play with the voltage.
Personally I'm at -62.5, but after seeing how low people are going I might be a bit more adventurous. Don't use the "Set at Boot" option when you're experimenting.

SupaKid said:
How did you undervolt by -100?
Click to expand...
Click to collapse
I did it gradually...and the fact that I was at 1ghz might have also made it possible. Started at -50 since most had said it was safe...then tried 60 then 75 then 90 then maxed at 100...worked beautifully.
I have heard and it is true that phones are made very different. Some exact same models can't oc or UV as high or low as others...I got lucky with a really good model...my old nexus S couldn't oc to 1.4 without freezing while others could.
Sent from my SAMSUNG-SGH-T989 using XDA

Nice!
Could I try your script?

SupaKid said:
Nice!
Could I try your script?
Click to expand...
Click to collapse
My bet is he used romanbb's FauxClock (which maxes out at -100mv).

What's the best app to under volt with?
Sent from my SGH-T989 using XDA

asting said:
I don't know if you're familiar with overclocking, but the same type of stability issues can occur. When you're undervolting you can think of your stock speed as an "overclock" and you're just trying to minimize the voltage necessary for stability. If you undervolt too much you can experience freezing, corruption, bad lag, etc. It's all the same process for desktop computers, laptops, and anything else you can play with the voltage.
Personally I'm at -62.5, but after seeing how low people are going I might be a bit more adventurous. Don't use the "Set at Boot" option when you're experimenting.
Click to expand...
Click to collapse
Right, I meant that there are no risks to undervolting in terms of physical damage to your phone, only stability issues which is fixed with a reboot, assuming you didn't set at boot. Overclocking is a bit different in that the risk overclocking presents in addition to stability issues is the risk of overheating which can permanently damage your phone. Undervolting can compensate for this somewhat by letting the power supplied to the processor and thus reducing the risk of overheat.

hiz99 said:
What's the best app to under volt with?
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
I use system tuner, you can also look for Gideons script that is flashable in cwm to undervolt.

Im undervolted to -75mv for quite some time running a script clocked at 1.518min384
Sent from MY Juggernaut!!!:thumbup:

I have Gideon's OC/UV script. How could I edit it to undervolt by -100?

SupaKid said:
Nice!
Could I try your script?
Click to expand...
Click to collapse
yup that's what I used lol.

GPU overclocking kernel request

Found this in another forum. Wanted to get exposure to the possibility.
http://forum.xda-developers.com/showpost.php?p=30087853&postcount=2
From another poster: He references using "siyah" kernel in his S3, which appears to be an international version with the same processor as we have. He indicates the need for "stweaks". He talks about GPU "steppings" so I'm not sure if Andrielux has changed these in his kernel. I installed the app "stweaks" but it wouldn't load as it said "no kernel support".
Wow!!! What in the world. Is this for real? I wonder how stable it is. From 440 up to 800?! They are using some app called Stweaks (and the kernel of course) to do it. Love to see that on our Note 2.
And since it seems that the GPU wasn't changed much....from the Galaxy s2 series... "700 Mhz - 1100 mv" is only 75mv higher than the stock 440...and accoring to the forums stable. A 70% increase in speed and stable. This is a must have for any newer kernels.

His kernel does have it. Read the n7100 thread for directions
Sent from my SPH-L900 using xda app-developers app

Rudyblah said:
His kernel does have it. Read the n7100 thread for directions
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
"his kernel". Can you be more specific? Do you have a link to this kernel that we can use on the Sprint GSNII that supports GPU OC?

ZenInsight said:
"his kernel". Can you be more specific? Do you have a link to this kernel that we can use on the Sprint GSNII that supports GPU OC?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1927852
It's about 1/3 the way down the OP with a beige arrow and a GPU frequency table. The few paragraphs below explain how to overclock the GPU via adb/terminal.
** Edit: AndreiLux just posted a new update which includes STweaks support.

Perseus kernel supports GPU overclocking now using STweaks. And it FLIES. Wow.

ZenInsight said:
Perseus kernel supports GPU overclocking now using STweaks. And it FLIES. Wow.
Click to expand...
Click to collapse
Stweaks slow overclocking but if you OC it by 100mhz laugh amd giggles numbers. What kind of actual gpu performance are you getting. I see with.stock better real life performance.during.gaming versus his kernel. So if I were to oc just to match stock is pointless to me.
why overheat the gpu when I can get the same performance on stock kernel.
It has to be the way he has it coded. Till it matches stock and further progress dev for it ill step in. I do appreciate his work and time. But for me I need something better than stock. I got this phone for a reason haha.
Sent from my SPH-L900 using xda premium

XxLostSoulxX said:
Stweaks slow overclocking but if you OC it by 100mhz laugh amd giggles numbers. What kind of actual gpu performance are you getting. I see with.stock better real life performance.during.gaming versus his kernel. So if I were to oc just to match stock is pointless to me.
why overheat the gpu when I can get the same performance on stock kernel.
It has to be the way he has it coded. Till it matches stock and further progress dev for it ill step in. I do appreciate his work and time. But for me I need something better than stock. I got this phone for a reason haha.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
What kind of performance? I beat the Nexus 4 as the highest rating 3D for a GPU in the market on Antutu. And it's noticeably different. Fun for extrme gaming I guess. But it affect the entire speed of the phone too.
Did you try it yet? The kernel is EXCELLENT. Going to donate from my next paycheck to dev. Thanks again.

ZenInsight said:
What kind of performance? I beat the Nexus 4 as the highest rating 3D for a GPU in the market on Antutu. And it's noticeably different. Fun for extrme gaming I guess. But it affect the entire speed of the phone too.
Did you try it yet? The kernel is EXCELLENT. Going to donate from my next paycheck to dev. Thanks again.
Click to expand...
Click to collapse
NFSMW, GTA 3, Heavy Gaming. I noticed it was bleh on the kernel. And stock was virtually amazing no fps in fps either even during benchmark. On his kernel the 3d test for quadrant ghe fps dipped below than 58 which was consistent on stock
Sent from my SPH-L900 using xda premium

XxLostSoulxX said:
NFSMW, GTA 3, Heavy Gaming. I noticed it was bleh on the kernel. And stock was virtually amazing no fps in fps either even during benchmark. On his kernel the 3d test for quadrant ghe fps dipped below than 58 which was consistent on stock
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Strange! I'm on Project ROM Ultra lite 1.2. Have you tried N.E.A.K? He said his kernel is set to 700mhz already (no need for STweaks). Can you test that one?

ZenInsight said:
Strange! I'm on Project ROM Ultra lite 1.2. Have you tried N.E.A.K? He said his kernel is set to 700mhz already (no need for STweaks). Can you test that one?
Click to expand...
Click to collapse
Why would I need a kernel to overclock the gpu to match stock gpu clock from stock kernel to get same performance performance. Neak is on the s3 not Note 2 unless he or it in that Rom but still.
I want a custom kernel that can match the GPU performance on the stock kernel without the need of overclocking
Sent from my SPH-L900 using xda premium

XxLostSoulxX said:
Why would I need a kernel to overclock the gpu to match stock gpu clock from stock kernel to get same performance performance. Neak is on the s3 not Note 2 unless he or it in that Rom but still.
I want a custom kernel that can match the GPU performance on the stock kernel without the need of overclocking
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Note 2 N.E.A.K.-
http://forum.xda-developers.com/showthread.php?t=2000328
Should we test it? I asked him if it will work on the Sprint version of the Note 2. I can't imagine why it would not.

FYI, STweaks is working for the Perseus kernel as of build 27. My GPU is currently at 733Mhz and I've undervolted all settings by 25 - no issues.

honki24 said:
FYI, STweaks is working for the Perseus kernel as of build 27. My GPU is currently at 733Mhz and I've undervolted all settings by 25 - no issues.
Click to expand...
Click to collapse
Yep. Seems like a very stable kernel to me. But the guy above is saying that the kernel has low framerates compared to stock. I am hoping he will test the Neak kernel out.

ZenInsight said:
Yep. Seems like a very stable kernel to me. But the guy above is saying that the kernel has low framerates compared to stock. I am hoping he will test the Neak kernel out.
Click to expand...
Click to collapse
Sorry but I will not ill be sticking to stock maybe in the future. That kernel seems weird not sure which to choose. And like I said, I don't see the point of downloading a kernel know that will I will basically need to overclock the gpu just to get the same performance as I would on the stock kernel.
Sent from my SPH-L900 using xda premium

Overclocking One V

A few questions about overclocking
First, is this even working? I'm using the latest PA ROM.
What are the best possible settings that don't damage the phone?
Sent from my One V using xda premium

Yes overclocking is definitely working. U can notice a sharp difference between lower and higher values...don't overclock above 1.7 GHz it may damage ur phone...
Sent from my One V using xda app-developers app

matjazfinzgar said:
A few questions about overclocking
First, is this even working? I'm using the latest PA ROM.
What are the best possible settings that don't damage the phone?
Sent from my One V using xda premium
Click to expand...
Click to collapse
Woha dude don't even think about going above 1.5.....and I am using 1.2 it's super stable right now...once again if u go.above 1.5 u may damage ur phone
Sent from my One V using xda premium

what kind of kernel do you need to overclock? are most custom roms ready for it already?

tellabee said:
what kind of kernel do you need to overclock? are most custom roms ready for it already?
Click to expand...
Click to collapse
All roms can be over clocked...it depends on the kernel
Sent from my One V using xda premium

ohhh i see. so are all kernels that are compatible with the phone compatible with all roms?

cybervibin said:
Woha dude don't even think about going above 1.5.....and I am using 1.2 it's super stable right now...once again if u go.above 1.5 u may damage ur phone
Sent from my One V using xda premium
Click to expand...
Click to collapse
mihirengg19 said:
Yes overclocking is definitely working. U can notice a sharp difference between stock and overclocked kernels...don't overclock above 1.7 GHz it may damage ur phone...
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
You guys.... stop scarying the people already. Overclocking your device will not break it in any case, most likely will shorten YOUR BATTERY LIFE! But that's it! You will not fry your phone, motherboard, display or whatever. I can ramp my phone upto 2ghz and it has nothing... But 1024 mhz or 1200 is enough!

I had OCed hellboy to 2 GHz...it felt stable but the phone crashed every time i opened an app...anyways 1.2 is best works so smoothly...best for everyday use...
Sent from my One V using xda app-developers app

When I overclock to 1.5ghz I don't notice any difference at all ...why ?also if I sometimes try 2.0ghz the phone becomes laggy like hell

donhashem.dh said:
When I overclock to 1.5ghz I don't notice any difference at all ...why ?also if I sometimes try 2.0ghz the phone becomes laggy like hell
Click to expand...
Click to collapse
Difference is there. Just to be sure that your phone works at that range (and its not a rom/kernel problem) - install Perfmon from the market and open the CPU section - It will then show you in real time at what range your CPU works. And if 2.0 gh becomes laggy it is because your cpu can go that high. Some cpu's can and others can't. That's just how they work. My old HTC Hero could go upto 691 from 526 default but other HTC Heroes could go upto 740....

Yo Son, Just OC'ed my V to 1.8GHz, it flys. Kill those animation.
When I oc'ed to 2.0GHz stability test Crashed dawg. Stability test it son!
BTW: When I drop to 1.9Ghz throttling issues Nig. So bench your one V too.
now I'm at 1.8GHz it's stable and no heat issues at all.

soulz said:
Yo Son, Just OC'ed my V to 1.8GHz, it flys. Kill those animation.
When I oc'ed to 2.0GHz stability test Crashed dawg. Stability test it son!
BTW: When I drop to 1.9Ghz throttling issues Nig. So bench your one V too.
now I'm at 1.8GHz it's stable and no heat issues at all.
Click to expand...
Click to collapse
Throttle 1.9ghz vs no throttle 1.8GHz
Sent from my HTC One V using xda app-developers app

Benchmarks are useless..

Why?
1ceb0x said:
Benchmarks are useless..
Click to expand...
Click to collapse
May I ask why? Not about AnTuTu.. but Quadrant Standard is great!! Even helps in choosing a better ROM.. a little..:cyclops:

The only use I have for benchmarking apps is to compare changes in roms and kernels on your own phone. If you use the same app to benchmark, you can see the different performance gains and losses in various rom and kernel combinations. i really don't think they do any good comparing performance between different phones, but for checking on your own mods they do come in handy.

riggerman0421 said:
The only use I have for benchmarking apps is to compare changes in roms and kernels on your own phone. If you use the same app to benchmark, you can see the different performance gains and losses in various rom and kernel combinations. i really don't think they do any good comparing performance between different phones, but for checking on your own mods they do come in handy.
Click to expand...
Click to collapse
Use benchmark to determine throttling

Here are some tips I know which increases the benchmark rating..
Use PERFORMANCE as the Governer after overclocking.. And disable 'Force use of GPU for 2D Drawing' in developer options.
Sent from my One V using xda app-developers app

Paresh Kalinani said:
Here are some tips I know which increases the benchmark rating..
Use PERFORMANCE as the Governer after overclocking.. And disable 'Force use of GPU for 2D Drawing' in developer options.
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
dont diable them, ur games will lag like ****, paresh dont give wong instructions. if u cant give proper instructions,please dont!
if u diable that, only the taransition animations willl be smoother along with some others, if u dont play games go ahead

cybervibin said:
dont diable them, ur games will lag like ****, paresh dont give wong instructions. if u cant give proper instructions,please dont!
if u diable that, only the taransition animations willl be smoother along with some others, if u dont play games go ahead
Click to expand...
Click to collapse
Ya I know that games lag. I just told for the 'Benchmark'.. 'cause I've always noticed my benchmark increasing when I disable it..
Of course I enable after the bemchmark! Wonder why does the benchmark increase...
Sent from my One V using xda app-developers app

dear ,
i am on mysence-v liteRC2.0 rom with helboy kernal , i wanted to increase my phones performance and now i am on 1.2ghrts so please let me know whats the maxmimum and min freequesnce i should set to get good preformance like if i keep max to 1200 and min ?? please i am new to this