Develop Bugs

[solved] htc desire doesn't boot anymore,stay on htc logo... brick?

Hi!
I'm french so I'm sorry for my poor english.
Since one week I've a HTC desire which doesn't boot any more.
It stays on the htc logo with white screen.
I tried to go to the recovery but always this white screen.
So I tried to reinstall the recovery by fastboot using fastboot flash recovery recovery.img .
always the same error even with several different recoveries
>fastboot flash recovery recovery.img
sending 'recovery' (4182 KB)... OKAY [ 0.582s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.584s
Click to expand...
Click to collapse
I tried the PB99IMG_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed on the µSD ...
I tried RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe .... same problem.
Now,in the bootloader:
bravo pvt1 ship s-off
hboot 0.93.0001
touchpanel synw0101
radio 5.11.05.27
Click to expand...
Click to collapse
What do I have to do?
Here's a paste oh the fastboot oem boot
. INFOsetup_tag addr=0xA0000100 cmdline add=0x8E
07D944
INFOTAG:Ramdisk OK
INFOTAG:smi ok, size = 0
INFOTAG:hwid 0x0
INFOTAG:skuid 0x21F04
INFOTAG:hero panel = 0x0
INFOTAG:engineerid = 0x0
INFOMCP dual-die
INFOMCP dual-die
INFOTAG:mono-die = 0x0
INFODevice CID is super CID
INFOCID is super CID
INFOBackup CID is empty
INFOsetting->cid::11111111
INFOserial number: SH07MPL01679
INFOcommandline from head: no_console_suspend=1
INFOcommand line length =419
INFOactive commandline: board_bravo.disable_uart3=0 board_bravo.
INFOusb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
INFOrd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
INFOmmc=false androidboot.baseband=4.06.00.02_2 androidboot.cid
INFO=11111111 androidboot.carrier=ALL androidboot.mid=PB992****
INFOandroidboot.keycaps=qwerty androidboot.mode=normal androidbo
INFOot.serialno=SH07MPL01679 androidboot.bootloader=0.80.0000 no
INFO_console_suspend=1
INFOaARM_Partion[0].name=misc
INFOaARM_Partion[1].name=recovery
INFOaARM_Partion[2].name=boot
INFOaARM_Partion[3].name=system
INFOaARM_Partion[4].name=cache
INFOaARM_Partion[5].name=userdata
INFOpartition number=6
INFOValid partition num=6
INFOjump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
INFOnel_addr(0x20008000)
INFO-------------------hboot boot time:774192 msec
FAILED (status read failed (Too many links))
finished. total time: 6.294s
Click to expand...
Click to collapse
Using the exe RUU it's again s-off.... that's strange,isn't it?

up.
do I have tu erase the recovery with fastboot in order to re flash it?
i've already viewed the Bortak's guide but nothing worked

I never need to erase anything before flash recovery.
You probably not S-OFF, try to boot into bootloader first by turn it on while holding back key, what do you see on that screen ?

so i've tried many things and.... it boots!
i've downgraded the alpharev hboot
then install recovery via fastboot
install hboot cm7
flash radio
and flash cm7 rom and wipe
thx to all the support provided by this forum!

how do you do that?

[Q][SOLVED] Need help with bricked Desire Z - S-ON | Stuck on white HTC logo

Hi, can some one respond to this? perhaps I bricked my Z doing:
I had rooted and S-OFF and I flashed PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09b_26.02.01.15_M2_release_149459_signed.zip"
as I wanted to return to original stock rom. I did it from Goldcard SD card, what I prepared before. By doing this I lost root but remained S-OFF
Than I followed: http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Unrooting_and_Returning_to_Stock go to S-ON and I managed this. Everything was going smooth so later when I was non root and S-ON, an OTA update came and I confirmed. Also next OTA update 2.3.3 T-mobile came with 73MB update and I confirmed too later. But the phone stucked after second update to 2.3.3 on HTC Logo and does not boot system.
- Hboot works
- recovery does not work (red attention mark)
- I have working fastboot and adb from PC
- phone is now S-ON and not rooted
... but not sure how to continue
tried flash new recovery but all fastboot end up like this:
Code:
$ fastboot flash recovery recovery-clockwork-3.0.2.4-vision.img
sending 'recovery' (4466 KB)...
OKAY [ 0.770s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.261s
I can not flash another PC10IMG.zip as it says, no valid ID.
Really sucked here.
Anyone some good ideas or phone is postmortem?

You flashed a g2 rom on your dz?
I'd say grab the lastest rom from http://www.shipped-roms.com/index.php?category=android&model=Vision
and flash it via ruu mode (fastboot oem rebootRUU, fastboot flash zip nameOfZip.zip)
-Nipqer

Yes I did
I tried now as per your advise, but I have signature errors, tried two zips, same result.
Code:
$ fastboot flash zip Vision_TMOUS_1.12.531.0_Radio_12.18.60.05P_26.01.00.17_M2_144460.zip
sending 'zip' (118430 KB)...
OKAY [ 20.029s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 33.034s
Any Ideas?

bump, anyone please?
Flashing any stock rom end up with signature error, the phone is branded to (INFOCID is T-MOB010)
no access to adb
INFOversion: 0.5
INFOversion-bootloader: 0.82.0000
INFOversion-baseband: 26.02.01.15_M2
INFOversion-cpld: None
INFOversion-microp: 0425
INFOversion-main: 1.19.531.1
INFOserialno: SH133RT00363
INFOimei: 352212047598680
INFOproduct: vision
INFOplatform: HBOOT-7230
INFOmodelid: PC1011000
INFOcidnum: T-MOB010
INFObattery-status: good
INFObattery-voltage: 3939mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-fafe9aa3
INFOhbootpreupdate: 11
INFOgencheckpt: 0

Try a different rom from shipped-roms.
the 1.19.531.1 rom or higher
-Nipqer

Nipqer said:
Try a different rom from shipped-roms.
the 1.19.531.1 rom or higher
-Nipqer
Click to expand...
Click to collapse
thanks. all images and I tried about 6 different including RRU I got from exe and gained from temp dir gives:
Code:
Image verification failed
HBOOT drops back to main menu, recovery says this error message.
any more hints?

Could you join the #G2ROOT irc channel on freenode It'll be easier to try help you there.
-Nipqer

Solved by creating GC by different method. Looks we did not have working GC before.

Can you be a bit more specific?
Sent from my HTC Vision using Tapatalk 2

htc desire reboot loop after unlock / s-off

hello, this desire is kicking my ass, 4 days not fixed? of trying and searching, can some one please help
was on orange,uk,htc branded dont know if was orange branded
tried several roms some they give error or just gets to black htc screen (waited) 30 min nothing
reboot loop after s-off ?
can flash this from gold card, shipped-roms.com/download.php?category=android&model=Bravo&file=OTA_Bravo_Froyrange_CH_2.22.71.4-2.22.71.2_releasevrnkzrd85wxshyvx.zip
but then just reboots continously
here is info i have
READING INFO: OK!
10:50:33 > MODEL: BRAVO / bravo
10:50:33 > VERSION: 0.5/None/0.93.0001
10:50:33 > FIRMWARE: 2.29.405.2/5.11.05.27
10:50:33 > HARDWARE: HBOOT-8x50
10:50:33 > HTC DESIRE READ INFO: END!
-----------------------------------------------------------------
C:\Users\POWERTECH 6000\AppData\Local\Android\android-sdk\platform-tools>fastboo
t oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is empty
(bootloader) setting->cid::11111111
(bootloader) serial number: HT03PPL06282
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =417
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.27 androidboot.cid=1
(bootloader) 1111111 androidboot.carrier=ALL androidboot.mid=PB992**** an
(bootloader) droidboot.keycaps=qwerty androidboot.mode=normal androidboot
(bootloader) .serialno=HT03PPL06282 androidboot.bootloader=0.93.0001 no_c
(bootloader) onsole_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:56610 msec
FAILED (status read failed (Too many links))
finished. total time: 6.879s
which ruu can i use just want to factory or get going in anyway i also noticed bottom end of phone gets really warm sometimes ?
thanks

kammy6000 said:
hello, this desire is kicking my ass, 4 days not fixed? of trying and searching, can some one please help
was on orange,uk,htc branded dont know if was orange branded
tried several roms some they give error or just gets to black htc screen (waited) 30 min nothing
reboot loop after s-off ?
can flash this from gold card, shipped-roms.com/download.php?category=android&model=Bravo&file=OTA_Bravo_Froyrange_CH_2.22.71.4-2.22.71.2_releasevrnkzrd85wxshyvx.zip
but then just reboots continously
here is info i have
READING INFO: OK!
10:50:33 > MODEL: BRAVO / bravo
10:50:33 > VERSION: 0.5/None/0.93.0001
10:50:33 > FIRMWARE: 2.29.405.2/5.11.05.27
10:50:33 > HARDWARE: HBOOT-8x50
10:50:33 > HTC DESIRE READ INFO: END!
-----------------------------------------------------------------
C:\Users\POWERTECH 6000\AppData\Local\Android\android-sdk\platform-tools>fastboo
t oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is empty
(bootloader) setting->cid::11111111
(bootloader) serial number: HT03PPL06282
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =417
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.27 androidboot.cid=1
(bootloader) 1111111 androidboot.carrier=ALL androidboot.mid=PB992**** an
(bootloader) droidboot.keycaps=qwerty androidboot.mode=normal androidboot
(bootloader) .serialno=HT03PPL06282 androidboot.bootloader=0.93.0001 no_c
(bootloader) onsole_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:56610 msec
FAILED (status read failed (Too many links))
finished. total time: 6.879s
which ruu can i use just want to factory or get going in anyway i also noticed bottom end of phone gets really warm sometimes ?
thanks
Click to expand...
Click to collapse
2.3 RUU.

desire
nlooooo said:
2.3 RUU.
Click to expand...
Click to collapse
hi thanks for help , i get error 155 ,please use correct update?
i am putting in fastboot to bypass battery low error!
is this incorrect?
i have s-off
hboot 0.93.001
thanks

kammy6000 said:
hi thanks for help , i get error 155 ,please use correct update?
i am putting in fastboot to bypass battery low error!
is this incorrect?
i have s-off
hboot 0.93.001
thanks
Click to expand...
Click to collapse
You cannot ruu while s-off is there. Make it S-ON and try aggain, but before making s-on flash a custom recovery. Just to be safe

desire
race55 said:
You cannot ruu while s-off is there. Make it S-ON and try aggain, but before making s-on flash a custom recovery. Just to be safe
Click to expand...
Click to collapse
thank you for telling me s must be on that why not work!
i tried to put recovery image bravo from clockwork from fastboot but no work cos i dont have eng boot i think,android flasher need eng boot aswell and i am not rooted
can you please tell me how to put s-off again please so i just factory
thanks

I'm not sure what are you talking about, what custom recovery before you do s-on?
The proper way to do that is to flash downgrade hboot from alpharev via fastboot and then run ruu.
Sent from my HTC Desire using Flashes and Thunders

desire
nlooooo said:
I'm not sure what are you talking about, what custom recovery before you do s-on?
The proper way to do that is to flash downgrade hboot from alpharev via fastboot and then run ruu.
Sent from my HTC Desire using Flashes and Thunders
Click to expand...
Click to collapse
ok sorry, phone was unlocked/ s off by, xtc clip
so no recovery installed!
i tried to write the image from alpharev website with fastboot commands i get starting recovery, then remote not allowed
C:\Users\ kammy\AppData\Local\Android\android-sdk\platform-tools>fastboo
t flash recovery bravo.img.img
sending 'recovery' (3256 KB)...
OKAY [ 0.485s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.502s
C:\Users\kammy\AppData\Local\Android\android-sdk\platform-tools>^A
how can i write the new img please, i am not very good with htc
thanks

kammy6000 said:
ok sorry, phone was unlocked/ s off by, xtc clip
so no recovery installed!
i tried to write the image from alpharev website with fastboot commands i get starting recovery, then remote not allowed
C:\Users\ kammy\AppData\Local\Android\android-sdk\platform-tools>fastboo
t flash recovery bravo.img.img
sending 'recovery' (3256 KB)...
OKAY [ 0.485s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.502s
C:\Users\kammy\AppData\Local\Android\android-sdk\platform-tools>^A
how can i write the new img please, i am not very good with htc
thanks
Click to expand...
Click to collapse
nlooooo ment flash Alpharev downgrader.img then run 2.3 ruu
Sent from my HTC Desire

desire
jmcclue said:
nlooooo ment flash Alpharev downgrader.img then run 2.3 ruu
Sent from my HTC Desire
Click to expand...
Click to collapse
can you tell me how to do that i thought it was through the run fastboot commands (i get errors) is there another way from sd card or something
or is there a exe file? sorry for noob q's
ok do i burn the alpharev iso to disk then boot from it then install new img to phone from the program?
thanks

As I understood you got s-off via htc site?
Then you don't have access to radio and hboot partitions only to recovery, system and data so it's not allowed to flash hboot via fastboot.
You can flash recovery from here:
http://www.clockworkmod.com/rommanager/
download proper recovery.img and flash it via fastboot. You have to type the path correctly to the space where you stored it, ie:
fastboot flash recovery c:\recovery.img
Then go here:
http://forum.xda-developers.com/showthread.php?t=809328
find and flash a rom of your choice. These are custom roms and are flashable from recovery (install zip from sd card command).

desire
nlooooo said:
As I understood you got s-off via htc site?
Then you don't have access to radio and hboot partitions only to recovery, system and data so it's not allowed to flash hboot via fastboot.
You can flash recovery from here:
http://www.clockworkmod.com/rommanager/
download proper recovery.img and flash it via fastboot. You have to type the path correctly to the space where you stored it, ie:
fastboot flash recovery c:\recovery.img
Then go here:
http://forum.xda-developers.com/showthread.php?t=809328
find and flash a rom of your choice. These are custom roms and are flashable from recovery (install zip from sd card command).
Click to expand...
Click to collapse
ok thats straight forward, and i followed it but why does it keep saying ,remote not allowed failed!
i have phone in usb displaying fastboot usb is highlighted!
users\kammy\appdata\local\android\android-sdk\platform-tools\fastboot
i dont get it,why the error
thanks very much

I didn't know what's xtc clip, now I found out and I'm sure that something failed in that process cause have s-off on your device but you actually don't have it cause you can't run fastboot commands. Sorry...

desire
nlooooo said:
I didn't know what's xtc clip, now I found out and I'm sure that something failed in that process cause have s-off on your device but you actually don't have it cause you can't run fastboot commands. Sorry...
Click to expand...
Click to collapse
ok thanks everyone for help, but i will be back with results

kammy6000 said:
ok thanks everyone for help, but i will be back with results
Click to expand...
Click to collapse
ok so now i have recovery clockwork installed i think ,i am able to install a custom rom , cyanogen , then it just crashes at the
load screen the screen goes all fuzzy or it looks like its loading but not going through the whole process
is this lcd,amoled issue?
or something else i am really close but what is stopping it loading
thanks

kammy6000 said:
ok so now i have recovery clockwork installed i think ,i am able to install a custom rom , cyanogen , then it just crashes at the
load screen the screen goes all fuzzy or it looks like its loading but not going through the whole process
is this lcd,amoled issue?
or something else i am really close but what is stopping it loading
thanks
Click to expand...
Click to collapse
ok now i have alpharev hboot cm7, but all roms just crash is there specific roms only please help me

kammy6000 said:
ok now i have alpharev hboot cm7, but all roms just crash is there specific roms only please help me
Click to expand...
Click to collapse
Here you go, just search the thread, for every rom it is written if it's cm7 hboot compatible.
http://forum.xda-developers.com/showthread.php?t=809328

[Q] HTC ONE X Hang after Update

ENDEAVORU XE SHIP S-OFF RL
CID-11111111
HBOOT-1.12.0000
CPLD-None
MICROP-None
RADIO-2.1204.135.20
eMMC- bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
June 28 2012, 11:31:28
Hi guys can somebody help me.. please
my phone stuck at HTC ONE logo
how can i fix this isssue...
after updating through internet it keeps on reboot again and again
i dont know how to fix this..
please help me.. tnx

chingkit09 said:
ENDEAVORU XE SHIP S-OFF RL
CID-11111111
HBOOT-1.12.0000
CPLD-None
MICROP-None
RADIO-2.1204.135.20
eMMC- bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
June 28 2012, 11:31:28
Hi guys can somebody help me.. please
my phone stuck at HTC ONE logo
how can i fix this isssue...
after updating through internet it keeps on reboot again and again
i dont know how to fix this..
please help me.. tnx
Click to expand...
Click to collapse
Search in the thread have many answare for ENDEAVORU XE it is different from ENDEAVORU PVT try to flash the higher firmware.zip manually

Hi
how can i fix this.. i dont know where i download..
im so stress in this problem.
please someone guide me how to fix this issue.
please please please

chingkit09 said:
how can i fix this.. i dont know where i download..
im so stress in this problem.
please someone guide me how to fix this issue.
please please please
Click to expand...
Click to collapse
ok download latest OTA 4.18,401,4 forom HERE
after read this
How to flash?
(bootloader needs to be relocked)
Re-lock your bootloader (this will most probably wipe content of your device)
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.

chingkit09 said:
how can i fix this.. i dont know where i download..
im so stress in this problem.
please someone guide me how to fix this issue.
please please please
Click to expand...
Click to collapse
after this..
the correct installing of custom rom is.
to unlock and to flash the recovery CWM 5.8.4.0
den install the rom. One_X_4.18.401.3_odexed
is this correct?
can u guide me.. please..
thank you thant

Thant said:
ok download latest OTA 4.18,401,4 forom HERE
after read this
How to flash?
(bootloader needs to be relocked)
Re-lock your bootloader (this will most probably wipe content of your device)
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
Click to expand...
Click to collapse
after this..
the correct installing of custom rom is.
to unlock and to flash the recovery CWM 5.8.4.0
den install the rom. One_X_4.18.401.3_odexed
is this correct?
can u guide me.. please..
thank you thant
sorry for the wrong quote.

after the command i did
C:\fastboot>fastboot flash zip Firmware.zip
sending 'zip' (12377 KB)... OKAY [ 1.779s]
writing 'zip'... INFOCan not find [android-info.txt] in zipped
image!
FAILED (remote: 24 parsing android-info fail)
finished. total time: 5.417s
C:\fastboot>fastboot flash zip Firmware.zip
sending 'zip' (12377 KB)... FAILED (remote: (00030003))
finished. total time: 0.001s
what will i do?
please help me fix this.. huhuhuhu

chingkit09 said:
after the command i did
C:\fastboot>fastboot flash zip Firmware.zip
sending 'zip' (12377 KB)... OKAY [ 1.779s]
writing 'zip'... INFOCan not find [android-info.txt] in zipped
image!
FAILED (remote: 24 parsing android-info fail)
finished. total time: 5.417s
C:\fastboot>fastboot flash zip Firmware.zip
sending 'zip' (12377 KB)... FAILED (remote: (00030003))
finished. total time: 0.001s
what will i do?
please help me fix this.. huhuhuhu
Click to expand...
Click to collapse
Your bootloader must be locked or relocket from this where I see I think it is not= And what happen when you run Fastboot oem rebootRUU the command must be exactly like I write with smal and Capital letters and you must to see black screen with HTC logo and after second flash you will see green line goes up

Thant said:
Your bootloader must be locked or relocket from this where I see I think it is not= And what happen when you run Fastboot oem rebootRUU the command must be exactly like I write with smal and Capital letters and you must to see black screen with HTC logo and after second flash you will see green line goes up
Click to expand...
Click to collapse
C:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.12.0000
INFOversion-baseband: 2.1204.135.20
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.17.707.3
INFOserialno: SH27GW101562
INFOimei: 353426058935339
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3778mV
INFOdevpower: 33
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.858s
C:\fastboot>fastboot oem lock
... INFOLock successfully...
FAILED (status read failed (Too many links))
finished. total time: 0.178s
C:\fastboot>fastboot oem lock
... INFODevice was already locked!
OKAY [ 0.017s]
finished. total time: 0.018s
C:\fastboot>fastboot oem lock
... INFODevice was already locked!
OKAY [ 0.018s]
finished. total time: 0.019s
C:\fastboot>fastboot oem rebootRUU
... INFOSave data from original MSC...
INFOSave data from SIF...
INFOUpdate partition data to SIF partition
INFOUpdate partition data from original MSC...
INFO[MSG] OKAY
OKAY [ 0.229s]
finished. total time: 0.230s
C:\fastboot>fastboot flash zip firmware.zip
sending 'zip' (12377 KB)... OKAY [ 1.786s]
writing 'zip'... INFOCan not find [android-info.txt] in zipped
image!
FAILED (remote: 24 parsing android-info fail)
finished. total time: 5.426s
look this thant..
it is already relocked
huhuhu help me

chingkit09 said:
C:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.12.0000
INFOversion-baseband: 2.1204.135.20
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.17.707.3
INFOserialno: SH27GW101562
INFOimei: 353426058935339
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3778mV
INFOdevpower: 33
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.858s
C:\fastboot>fastboot oem lock
... INFOLock successfully...
FAILED (status read failed (Too many links))
finished. total time: 0.178s
C:\fastboot>fastboot oem lock
... INFODevice was already locked!
OKAY [ 0.017s]
finished. total time: 0.018s
C:\fastboot>fastboot oem lock
... INFODevice was already locked!
OKAY [ 0.018s]
finished. total time: 0.019s
C:\fastboot>fastboot oem rebootRUU
... INFOSave data from original MSC...
INFOSave data from SIF...
INFOUpdate partition data to SIF partition
INFOUpdate partition data from original MSC...
INFO[MSG] OKAY
OKAY [ 0.229s]
finished. total time: 0.230s
C:\fastboot>fastboot flash zip firmware.zip
sending 'zip' (12377 KB)... OKAY [ 1.786s]
writing 'zip'... INFOCan not find [android-info.txt] in zipped
image!
FAILED (remote: 24 parsing android-info fail)
finished. total time: 5.426s
look this thant..
it is already relocked
huhuhu help me
Click to expand...
Click to collapse
are you take the firmware.zip inside the ota archive? or you trying to flash renamed ota to firmware.zip?
or just download this RUU and run as administrator

Thant said:
Your bootloader must be locked or relocket from this where I see I think it is not= And what happen when you run Fastboot oem rebootRUU the command must be exactly like I write with smal and Capital letters and you must to see black screen with HTC logo and after second flash you will see green line goes up
Click to expand...
Click to collapse
Thant said:
are you take the firmware.zip inside the ota archive? or you trying to flash renamed ota to firmware.zip?
or just download this RUU and run as administrator
Click to expand...
Click to collapse
C:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.12.0000
INFOversion-baseband: 2.1204.135.20
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.17.707.3
INFOserialno: SH27GW101562
INFOimei: 353426058935339
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3742mV
INFOdevpower: 21
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.824s
C:\fastboot>fastboot oem lock
... INFODevice was already locked!
OKAY [ 0.022s]
finished. total time: 0.023s
C:\fastboot>fastboot oem rebootRUU
... INFOSave data from original MSC...
INFOSave data from SIF...
INFOUpdate partition data to SIF partition
INFOUpdate partition data from original MSC...
INFO[MSG] OKAY
OKAY [ 0.227s]
finished. total time: 0.228s
C:\fastboot>fastboot flash zip firmware.zip
sending 'zip' (11685 KB)... OKAY [ 1.688s]
writing 'zip'... INFOshift signature_size for header checking.
.
INFOchecking model ID...
INFOchecking custom ID...
INFOstart image[boot] unzipping & flushing...
INFOFormat partition LNX done
INFO[RUU]WP,boot,100
INFOstart image[recovery] unzipping & flushing...
INFOFormat partition SOS done
INFO[RUU]WP,recovery,100
INFOERASE backup cid
OKAY [ 2.678s]
finished. total time: 4.367s
yehey its all ready done
what is the next step on this?
please help me thant please..
waiting for your reply

thant..
how can i install the custom rom
the phone is still stockon HTC one
thant teach me how to fix this please... huhuhuhu

chingkit09 said:
thant..
how can i install the custom rom
the phone is still stockon HTC one
thant teach me how to fix this please... huhuhuhu
Click to expand...
Click to collapse
Now go to htcdev.com and unlock your bootloader after this flash Philz recovery 15.5.9 and mount sd card copy rom sense or AOSP to sd card and flash the boot.img from rom.zip to the phone go in recovery and install rom.zip. If you want to install CM11 you need latest Philz recovery or Latest CWM from CM11 thread. but ont this two recoverys Mount sd card not working first flash Philz 5.15.9 and then copy the rom to the sd card and then if you want to install CM11 flash Philz latest or CWM latest and flash CM11
THIS is latest Philz for One X
THIS is philz 5.15.9
For philz recovery take recovery.img inside from archive
And one more Question now your HBOOT must be 1.72 RIGHT?

Thant said:
Now go to htcdev.com and unlock your bootloader after this flash Philz recovery 15.5.9 and mount sd card copy rom sense or AOSP to sd card and flash the boot.img from rom.zip to the phone go in recovery and install rom.zip. If you want to install CM11 you need latest Philz recovery or Latest CWM from CM11 thread. but ont this two recoverys Mount sd card not working first flash Philz 5.15.9 and then copy the rom to the sd card and then if you want to install CM11 flash Philz latest or CWM latest and flash CM11
THIS is latest Philz for One X
THIS is philz 5.15.9
For philz recovery take recovery.img inside from archive
And one more Question now your HBOOT must be 1.72 RIGHT?
Click to expand...
Click to collapse
where i can find the rom.. huhuhu
thant can i chat you? for fast communication please... huhuhu
my head is going to blow..

chingkit09 said:
where i can find the rom.. huhuhu
thant can i chat you? for fast communication please... huhuhu
my head is going to blow..
Click to expand...
Click to collapse
ROM HERE or HERE the first link is close to stock on second most AOSP and AICP roms and hard modyfied sense roms
But first unlock bootloader and flash philz recovery go in recovery and charge your phone to full
waithing to charge your phone you will check wich ROM you want and download and install it you will see bugs and other think

thant im dead
i dont know what to do.. huhuhu please
can i chat you in yahoo?
please help me.. i dont know what to do.
im so stress and i didn't eat my breakfast,lunch
please help my please..
im so lose
i dont know what to do..
or can we chat on fb? please.

chingkit09 said:
thant im dead
i dont know what to do.. huhuhu please
can i chat you in yahoo?
please help me.. i dont know what to do.
im so stress and i didn't eat my breakfast,lunch
please help my please..
im so lose
i dont know what to do..
or can we chat on fb? please.
Click to expand...
Click to collapse
OK are you unlocked your bootloader via htcdev.com go to the site and take your Unlock_code.bin choice all other supported model on the button unlock bootloader after this fallow the instruction in the site after unlock your bootloader, download philz recovery 5.15.9 take recovery.img from the archive and use this comand to flash it fastboot flash recovery recovery.img after this run fastboot erase cache go in recovery and charge your phone
And one more think I write you on the private I dont use yahoo or facebook and I think you not reading what I write you I must to say something 5 times and after this you will do it. Like @Mr Hofs say READING IS GIFT
Yes you are still on the 1.12 becouse you didnt flash the firmware.zip twice like I write on the 2-3 post up I see your command but I see you runt fastboot flash zip firmware.zip only ane time.

the HBOOT still 1.12.0000
how will i change this? huhuhuhu
super lose..

Thant said:
OK are you unlocked your bootloader via htcdev.com go to the site and take your Unlock_code.bin choice all other supported model on the button unlock bootloader after this fallow the instruction in the site after unlock your bootloader, download philz recovery 5.15.9 take recovery.img from the archive and use this comand to flash it fastboot flash recovery recovery.img after this run fastboot erase cache go in recovery and charge your phone
And one more think I write you on the private I dont use yahoo or facebook and I think you not reading what I write you I must to say something 5 times and after this you will do it. Like @MrHofs say READING IS GIFT
Click to expand...
Click to collapse
already done thant.
now i am in the philZ Touch 5
and the cord is connected how to charger the phone?

And one more think I write you on the private I dont use yahoo or facebook and I think you not reading what I write you I must to say something 5 times and after this you will do it. Like @MrHofs say READING IS GIFT
sorry thant..
how to Like @MrHofs say READING IS GIFT
sorry i dont know

About to brick my DZ, help! (Solved, backupCID was blank)

So i had custom rom installed by previous owner, but which i did not like, so i wanted to go stock.
After following some guide i managed to flash new rom into my DZ using CWM and all hell broke loose.
My DZ refused to boot, only gives me the white htc screen and vibrates once.
From hboot i tried go back into recovery, which gives me same white screen with htc logo and vibrates once. Same goes for Factory reset option.
After week of browsing xda forums and google, i finally gave up. Thou i managed once to reboot into G2 os after attempted flash trhu PC10IMG method or from recovery as first attempt, not sure. Which i thougt was supposed to be DZ rom, but was not. This rom might have reduced my system partition, i dont know how to confirm this.
Fastboot works, but no adb since i have no OS running atm.
Fastboot getvar all gives me this:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\User>fastboot devices
SH0B5RT09144 fastboot
C:\Documents and Settings\User>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.84.2000
(bootloader) version-baseband: 26.02.01.15_M2
(bootloader) version-cpld: None
(bootloader) version-microp: 0425
(bootloader) version-main: 1.22.531.8
(bootloader) serialno: SH0B5RT09144
(bootloader) imei: 352212045345548
(bootloader) product: vision
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PC1011000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3781mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: ENG
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: adbd7a75
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
C:\Documents and Settings\User>
At this point i dont want to go solo anymore, so im crying out for help on this one... I want to save this awesome Desire Z
Edit: I am able to flash recovery using fastboot flash recovery recovery.img but recovery option is still useless (does the white screen htc logo vibrating once thingy)

Boot to bootloader and write down all on that screen here
Then in bootloader choose image CRC and write down all that (may take 5min to run)
Then we will go from there
Sent from my Nexus 4 using XDA Premium 4 mobile app

demkantor said:
Boot to bootloader and write down all on that screen here
Then in bootloader choose image CRC and write down all that (may take 5min to run)
Then we will go from there
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
VISION PVT ENG S-OFF
HBOOT-0.84.2000 (PC1011000)
MICROP-0425
RADIO-26.02.01.15_M2
eMMC-boot
Sep 8 2010 , 15:56:38
Then i have Fastboot, recovery,factory reset, simlock, system info and image crc in this order.
In image CRC i have:
hboot : 0x2A125CF4
boot : 0xD28A4324
recovery : 0x26A3CD9C
system : 0x0
Then it promts me to press power key to go back

Alright, you are looking good and most likely this isn't a brick, should be easy to recover
Do these steps
Go to fastboot mode and run
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
Now you want the most recent recovery, probably latest 4ext (see this thread for recovery links - http://forum.xda-developers.com/showthread.php?t=2348266
In second post along with lots of other good links
Now take this image and
fastboot flash recovery nameofrecovery.img
fastboot reboot-bootloader
Now choose recovery
If this gets you there flash ROM of choice (and gapps if needed) in this new recovery
Reboot
If anything fails or you can't find links let me know
Best of luck!
Sent from my Nexus 4 using XDA Premium 4 mobile app

C:\Documents and Settings\User>fastboot erase system -w
Erase successful, but not automatically formatting.
Can't determine partition type.
FAILED (remote: unknown command)
Erase successful, but not automatically formatting.
Can't determine partition type.
FAILED (remote: unknown command)
erasing 'system'...
OKAY [ 0.344s]
erasing 'userdata'...
OKAY [ 0.266s]
erasing 'cache'...
OKAY [ 0.109s]
finished. total time: 0.719s
C:\Documents and Settings\User>fastboot erase boot
erasing 'boot'...
OKAY [ 0.125s]
finished. total time: 0.125s
C:\Documents and Settings\User>fastboot erase recovery
erasing 'recovery'...
OKAY [ 0.156s]
finished. total time: 0.156s
C:\Documents and Settings\User>fastboot flash recovery recovery.img
error: cannot load 'recovery.img'
C:\Documents and Settings\User>cd C:\android-sdk_r11-windows\platform-tools
C:\android-sdk_r11-windows\platform-tools>fastboot flash recovery recovery.img
sending 'recovery' (5342 KB)...
OKAY [ 0.891s]
writing 'recovery'...
OKAY [ 0.594s]
finished. total time: 1.484s
C:\android-sdk_r11-windows\platform-tools>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.156s]
finished. total time: 0.156s
C:\android-sdk_r11-windows\platform-tools>
Did all that but still cannot access recovery :/ does the white screen thing.
Now im having hard time booting into hboot / fastboot
Edit: Okay, got in after a while Image crc as follows:
hboot 0x2A125CF4
boot 0x0
recovery 0x4C2506F5
system 0x0

http://forum.xda-developers.com/showthread.php?t=2348266
The second post in this thread you will find a section on adb and fastboot, the how to why to link brings you to a guide on fastboot
Flash the dz hboot from there (be sure to check md5sum)
I'm under the impression you have a corrupt partition right now so
fastboot flash hboot hboot.img
fastboot reboot-bootloader
Now start over with the same fast boot erase and flash commands from prior
Sent from my Nexus 7 using XDA Premium 4 mobile app

Still no luck.
I flashed hboot_7230_0.82.0000_100902.nb0, which i got from the PC10IMG.zip mentioned in thread.
Image CRC from hboot did not change after flash, so i guess i had the exact same hboot.
I repeated all the steps you mentioned and it gave me same error messages.
Still willing to help me?

You should have the .84.2000 according to your bootloader
Maybe try flashing the dz pc10img.zip in post 30 of that thread, many have said it fixed similar problems for them
Sent from my Nexus 4 using XDA Premium 4 mobile app

demkantor said:
You should have the .84.2000 according to your bootloader
Maybe try flashing the dz pc10img.zip in post 30 of that thread, many have said it fixed similar problems for them
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Did that and repeated all again. Did not do anything :/ only recovery crc changed, but flashed recovery did not work so i flashed the 4ext again, still no access to recovery
Any ideas? Maybe im stuck with G2 system size since i flashed G2 rom back then, which i got to boot. Should i try that again? If so, any hints to do it properly?

Unzip that pc10img.zip that was linked in post 30 from the fastboot thread, use the dz one and flash just the bootloader with fastboot
There is an issue somewhere and I'm under the impression that if we can successfully flash this bootloader all will be good
Otherwise try this
Boot to bootloader
fastboot rebootRUU
fastboot flash update dzpc10img.zip
Of course replace with whatever the proper name is (forget off hand)
And then note all input/output from cmd here
Sent from my Nexus 7 using XDA Premium 4 mobile app

demkantor said:
Unzip that pc10img.zip that was linked in post 30 from the fastboot thread, use the dz one and flash just the bootloader with fastboot
There is an issue somewhere and I'm under the impression that if we can successfully flash this bootloader all will be good
Otherwise try this
Boot to bootloader
fastboot rebootRUU
fastboot flash update dzpc10img.zip
Of course replace with whatever the proper name is (forget off hand)
And then note all input/output from cmd here
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Flashing the hboot from zip changes nothing and for some reason fastboot rebootRUU gives me list of commands
C:\android-sdk_r11-windows\platform-tools>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.156s]
finished. total time: 0.156s
C:\android-sdk_r11-windows\platform-tools>fastboot rebootRUU
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot, system, and if found,
recovery, tos
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size.
default: 2048
-S <size>[K|M|G] automatically sparse files greater
than size. 0 to disable
C:\android-sdk_r11-windows\platform-tools>
Should i try to manually format system partition? If so, how and how large?

Sorry, the command is
fastboot oem rebootRUU
Sent from my Nexus 4 using XDA Premium 4 mobile app

Do you mean fastboot update DZPC10IMG.zip since fastboot flash update DZPC10IMG.zip gives unknown partition error.

Sounds right, its been probably at least a year or two since I've worked on this, take a look at my threads and you'll see two comprehensive guides on fastboot which will have all the proper steps
Sent from my Nexus 4 using XDA Premium 4 mobile app

I was able to flash stock rom extracted from RUU.
I used fastboot oem rebootRUU and then fastboot flash zip rom.zip and everything went OK.
However, i still cannot access recovery nor boot my phone.
Atm my hboot is 0.85.0013 SHIP S-OFF
Radio 26.10.04.03_M
Image CRC :
osb1: 0x7EE4ED8C
amss: 0xB7A63815
hboot: 0x887F7ABB
boot : 0x4CB9BC27
recovery 0xCFD60F9D
system 0xC46F8680
Any leads where to go from here?

Um, what RUU did you use? Did you use the one I made from my post? You should have a different bootloader if so
Sent from my Nexus 4 using XDA Premium 4 mobile app

demkantor said:
Um, what RUU did you use? Did you use the one I made from my post? You should have a different bootloader if so
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was able to flash DZPC10IMG.zip from rebootRUU but that did no good either so i tried to flash this rom from this RUU RUU_Vision_Gingerbread_S_HTC_WWE_2.42.405.2_Radio_12.56.60.25_26.10.04.03_M_release_199043_signed.exe
Which i believe is supposed to be latest stock rom from DZ... correct me if im wrong

The problem with flashing a random PC10IMG.zip is that it will change your hboot, recovery, radio, etc
Not all this firmware is 100% compatible and can cause issues depending on your phones current state
Can you link the guide you followed originally by the way? Want to see if I can figure out what happened to your phone
Sent from my Nexus 4 using XDA Premium 4 mobile app

demkantor said:
The problem with flashing a random PC10IMG.zip is that it will change your hboot, recovery, radio, etc
Not all this firmware is 100% compatible and can cause issues depending on your phones current state
Can you link the guide you followed originally by the way? Want to see if I can figure out what happened to your phone
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have no idea where that guide is now, but if my memory serves me well, i flashed PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09b_26.02.01.15_M2_release_149459_signed.zip from cwm recovery. After that i was able to boot into G2 rom for a while, thou my onscreen buttons didnt work (back and home etc) after that, no idea.
Edit: I do have my old DZ with working CWM v3.0.2.4 recovery. Can i use that in my advantage somehow?

Here is some data if its helpfull. My backup cid seems to be blank. Im under impression it should be like y_13 or so.
C:\adt-bundle-windows-x86-20140702\sdk\platform-tools>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8D087B50
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x25209
(bootloader) TAG:hero panel = 0xF
(bootloader) TAG:engineerid = 0x4
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is
(bootloader) setting->cid::
(bootloader) serial number: SH0B5RT09144
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =456
(bootloader) active commandline: board_vision.disable_uart2=0 board_visio
(bootloader) n.usb_h2w_sw=0 board_vision.disable_sdcard=0 diag.enabled=0
(bootloader) board_vision.debug_uart=0 smisize=0 userdata_sel=0 androidbo
(bootloader) ot.emmc=true androidboot.baseband=26.13.04.19_M androidboot
(bootloader) .cid= androidboot.batt_poweron=good_battery androidboot.carr
(bootloader) ier=COMMON androidboot.mid=PC1011000 androidboot.keycaps=qwe
(bootloader) rty androidboot.mode=normal androidboot.serialno=SH0B5RT0914
(bootloader) 4 androidboot.bootloader=0.84.2000 no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) aARM_Partion[6].name=devlog
(bootloader) aARM_Partion[7].name=pdata
(bootloader) partition number=8
(bootloader) Valid partition num=8
(bootloader) jump_to_kernel: machine_id(2245), tags_addr(0x4000100), kern
(bootloader) el_addr(0x4008000)
(bootloader) -------------------hboot boot time:657379 msec
FAILED (status read failed (Unknown error))
finished. total time: 222.922s