[Discussion] "Ubuntu for Phones" - Defy General

As you all know "Ubuntu for phones" has been released for the Galaxy Nexus, Nexus 4, Nexus 7 and Nexus 10. Lets discuss about this being a possiblity to port on our device.
A porting guide will be posted on Ubuntu website on 22nd (which is today in India).
https://wiki.ubuntu.com/Touch/Porting#Stay_tuned.21

Great my fingers-crossed hope we can take advantage of Ubuntu in our phone
Sent from my MB526 using xda premium

Dual Boot
Just curious, the porting guide says that Ubuntu runs over the stock kernel, if it's right, would it be possible to run it in dual boot?

Samsung Galaxy S (I9000) is having official support and currently the port is work in progress. Apart from the system partition size issue, if samsung galaxy s can run it, so can defy. This is very early stage and we can only presume such thing.
https://wiki.ubuntu.com/Touch/Devices

Floydroider said:
Just curious, the porting guide says that Ubuntu runs over the stock kernel, if it's right, would it be possible to run it in dual boot?
Click to expand...
Click to collapse
So no problem with locked bootloader ?
Sent from my MB526 using xda app-developers app

Marmotte51 said:
So no problem with locked bootloader ?
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Should not be, most of the phones which can run cm 10.1 can easily handle this. Building it too doesn't look much difficult. "Ubuntu for phones" is surprisingly based on CM sources.
I've not enough speed for syncing sources, maybe Kayant or m11kkaa can build it for us.

brajesh.sharma87 said:
Should not be, most of the phones which can run cm 10.1 can easily handle this. Building it too doesn't look much difficult. "Ubuntu for phones" is surprisingly based on CM sources.
I've not enough speed for syncing sources, maybe Kayant or m11kkaa can build it for us.
Click to expand...
Click to collapse
Till it gets stable enough to worth porting, we will probably have CM 10.1 and kernel 3.0 working perfectly

A little update
I have successfully compiled the the ubuntu zip for our defy however, am facing a major issue at the moment which is the prebulit image that is needed to flash before installing the defy zip is not being installed for some reason Am currently trying to find why this is but no luck so far...... I think I may be something to do with our data partition..... maybe the preimage is too big for it??? that am not sure but I have just reduced it by deleting some images and videos included in the demo..... Hopefully it will decide to work this time
Edit - that did the trick it's working now ^_^
Link to thread ----> http://forum.xda-developers.com/showthread.php?t=2174544

Kayant said:
I have successfully compiled the the ubuntu zip for our defy however, am facing a major issue at the moment which is the prebulit image that is needed to flash before installing the defy zip is not being installed for some reason Am currently trying to find why this is but no luck so far...... I think I may be something to do with our data partition..... maybe the preimage is too big for it??? that am not sure but I have just reduced it by deleting some images and videos included in the demo..... Hopefully it will decide to work this time
Edit - that did the trick it's working now ^_^
Link to thread ----> http://forum.xda-developers.com/showthread.php?t=2174544
Click to expand...
Click to collapse
what is the version of kernel?
sorry for my bad english

Hello!
I am an ubuntu user since 2006 or so and was quiet happy to see the news about it on phones but the hardware requirements are a bit stronger than what our device has. I remember something about minimum dualcore processors and 1 Gb ram. But if someone manages that'd be fun

Keboid said:
Hello!
I am an ubuntu user since 2006 or so and was quiet happy to see the news about it on phones but the hardware requirements are a bit stronger than what our device has. I remember something about minimum dualcore processors and 1 Gb ram. But if someone manages that'd be fun
Click to expand...
Click to collapse
That's for the high end.... low spec our defy matches most of the requirements.....
Let's Go ^_^

I've tried it and the screen does not work

rol525 said:
I've tried it and the screen does not work
Click to expand...
Click to collapse
What exactly do you mean Is the phone not booting pass the black screen after the moto logo.... if so you need to make sure you have wipe data if not the quantal-preinstalled-phablet-armhf.zip won't be installed and flashed the quantal-preinstalled-phablet-armhf.zip first or it will never boot.

Kayant said:
What exactly do you mean Is the phone not booting pass the black screen after the moto logo.... if so you need to make sure you have wipe data if not the quantal-preinstalled-phablet-armhf.zip won't be installed and flashed the quantal-preinstalled-phablet-armhf.zip first or it will never boot.
Click to expand...
Click to collapse
passes the logo and came to the screen of 14 tweets
sorry for my bad english
pd: i restore cm9

rol525 said:
passes the logo and came to the screen of 14 tweets
sorry for my bad english
pd: i restore cm9
Click to expand...
Click to collapse
Then it works .... I think I see what you mean now..... yh it q Ubuntu bug u have to switch off the phone by removing the battery....
Let's Go ^_^

i have a mb525 green lens

Well, i had time to watch the videos and what to say as an old ubuntu user... its just awesome!!

Related

[Q] Can we do dual boot?

It is just fascinating to try out arco's new CM9 rom.
However, as the camera is still non-functional, I am aching whether to choose between blacknote or CM9...
But can I take both? Like what they do with boot manager...
Interesting.. it can be done but I wonder if there is a Modding for this...
Sent From My Ancora ICS CM9
I found this mod for Defy
http://forum.xda-developers.com/showthread.php?t=1522329
Well...
It is said on the page of Boot Manager Pro that
"BootManager will not work with Samsung devices that are not listed because of the way Samsung handles the boot partition."
Kinda crap -.-
Well, but the interesting thing is...
http://forum.xda-developers.com/showthread.php?t=1375550
found this when googling samsung dual boot
Can we just do the same thingy here?
that would be somethin if we manage to get our SGW to dual boot
like my acer aspire 1 netbook
I would be glad if I can test camera in CM9 while using ordinary camera in Gingerbread for daily operation.
Possible?
Any updates on this?
Dual Boot
anyone have try dual boot on galaxy w ?
Thanks
Any update on this?
sorry, i am new, what is dual boot?
Brian_SGW_CM9 said:
sorry, i am new, what is dual boot?
Click to expand...
Click to collapse
Like having a PC with Windows Vista n Windows 7
Sent from my GT-I8150 using xda premium
I think this is a good suggestion
I think its related to the kernel, like siyah kernel on sgs2 or sgs3 it can perform dualbooting
hotheabilly said:
I think its related to the kernel, like siyah kernel on sgs2 or sgs3 it can perform dualbooting
Click to expand...
Click to collapse
So you mean our SGW's kernal not supporting dual boot feature.?!
nereuseng said:
So you mean our SGW's kernal not supporting dual boot feature.?!
Click to expand...
Click to collapse
For this time, nope. Maybe in future someone good at linux or kernel imaging deciding to using our phone and build a kernel hehe.
As far I can see now, there is not much kernel for us. In gb is cowithgun kernel based on arco work, and stock kernel. In cm7, oisis try to gave a hand. But in ics therevis only one kernel brought by arco
Sent from my GT-I8150 using Tapatalk 2

[Q][Devs] Ubuntu Phone Os

Hello all.
Do you think it's possible to work on an Ubuntu port from nexus 4 for our devices?
Maybe someone is already working on it. If yes could you tell us please.
Thanks you devs for your hard work!
Maybe image from n7 would be easier to port since it is tegra 3...
all i can say would love to se this tested out due to the Nexus 7 sharing the tegra 3 but there is alot of other issues at hand that may be different but the dev have made wonders of previous things.
Yes I agree with you. Deva are really goods here. I'm a noob in Linux dev. So n7 image is ready to download it's why I asked this question... I would like to try but I don't want to brick my phone... But I'm really interested to try Ubuntu...
An official porting guide will be availllable at 15pm... https://wiki.ubuntu.com/Touch/Porting
We want to see ports for our HTC One X Some developers already ported it to SGS3.
I think is better wait for a port when radio and other works.
Because, the first image, have the radio off, kernel is unstable and a lot of pics are fake
To anybody else trying: can you get the "phablet-dev-bootstrap" command to work? 'Cause I can't.
I'll try at home... Work in progress for one x+... Maybe it's will be easier to port it...
Sorry for question but i'm interesting: why port a pre-alpha release when don't work anything?
I think in 2 months there are new release with a stable kernel and with radio on
TToivanen said:
To anybody else trying: can you get the "phablet-dev-bootstrap" command to work? 'Cause I can't.
Click to expand...
Click to collapse
Yes I can
add the repo, download it and it worked just fine
Guich said:
Sorry for question but i'm interesting: why port a pre-alpha release when don't work anything?
I think in 2 months there are new release with a stable kernel and with radio on
Click to expand...
Click to collapse
Because of.... I need it! I want to give it a try and most probably, whenever it becomes a bit more usable, we won't have to start everything from scratches.
I'm trying to do something with the port, can't assure anything... no enthusiastic comments please!
R: [Q][Devs] Ubuntu Phone Os
It was an info question
I think is better take a port when it will be more usable but we are free and my it was a question!
Don't worry mate
Sent from HOX
no problem! I think that it will be a maintainment and not a new start!
p.s. ciao collega
We just want to see how it look & work... I don't care about radio
R: [Q][Devs] Ubuntu Phone Os
virtualflyer said:
no problem! I think that it will be a maintainment and not a new start!
p.s. ciao collega
Click to expand...
Click to collapse
Ok
P.s. good ciao
utopykzebulon said:
We just want to see how it look & work... I don't care about radio
Click to expand...
Click to collapse
Well, i have a friend with gnexus, he tried ubuntu and: the kernel is unstable and is laggy
So, i think radio is important, because you can use wifi and signal network...
Sent from HOX
TToivanen said:
To anybody else trying: can you get the "phablet-dev-bootstrap" command to work? 'Cause I can't.
Click to expand...
Click to collapse
yes you have to install phablet-tools package.
Ok I got it syncing, made a noobish mistake.

Defy Pro Rom

So, I've got the ugly duckling of the Defy line(but I love it), the Defy Pro XT560. I was able to root using some adapted steps from a Motorola Motoluxe procedure(http://bruno.tuy.com.br/blog/?p=173, not in english). I'm wondering if anyone knows if this would mean there's a chance the phones are similar enough to possibly, maybe, someday get an updated ROM on the thing?
Similar? Not. Screens are not similar, hardware keyboard. I dont think its possible cuz of the screen resolution. It will be a pain in the "face".
I don't know enough about it. Apps seem to work fine with the resolution...is there a good guide for rom cooking somewhere? Maybe I'll play around myself since I doubt I can find anything that'll work with the phone.
Most of the apps are able to run on many devices cuz they support different resolution. It has nothing to do with the ROM.
Mavasilisk said:
Most of the apps are able to run on many devices cuz they support different resolution. It has nothing to do with the ROM.
Click to expand...
Click to collapse
What is the fundamental issue with a different resolution?
Check some ROM porting guide. Its written there that you have to choose ROMs with the same resolution cuz it will be easier to port. It means that u cant use the same ROM on 2 different phones with different resolution.
Mavasilisk said:
Check some ROM porting guide. Its written there that you have to choose ROMs with the same resolution cuz it will be easier to port. It means that u cant use the same ROM on 2 different phones with different resolution.
Click to expand...
Click to collapse
Well, there must be a guide somewhere on how to cook a rom....I'd like to at least try, given that once the next version comes out, GB will be 4 versions behind...
I have a 2ndinit CM 7.2 port just about complete. Everything except the camera works and I'm pretty close on that. This is using stock kernel, I have not looked into 2ndboot yet. I'm also waiting on the kernel source from motorola. If there's intrerest still, one I get the cam working ill post it.
superdave said:
I have a 2ndinit CM 7.2 port just about complete. Everything except the camera works and I'm pretty close on that. This is using stock kernel, I have not looked into 2ndboot yet. I'm also waiting on the kernel source from motorola. If there's intrerest still, one I get the cam working ill post it.
Click to expand...
Click to collapse
Yes, we are very interesting with CM7 ROM - I had used it on my ChaCha and it was very nice. But, I believe that if I want to install custom ROM, I must have CWM Recovery (custom recovery) already installed, isn't it?
Sorry for my bad English .
CWM is installed using the Bootmenu installer. Right now I am running CM 7.2 off my SD card so I can dual boot. To access bootmenu cleanly I am currently using battery_charger mode,but, I have been able to get into CM7.2 using the first run service vpnmanagerpm. also. I still need to get the camera working, but, hope to have something up soon.
superdave said:
I still need to get the camera working, but, hope to have something up soon.
Click to expand...
Click to collapse
Thanks for the reply.
OK, if you already have running CM7.2 on Moto Defy Pro it's very good news, so one problem is camera, isn't it?
superdave said:
I have a 2ndinit CM 7.2 port just about complete. Everything except the camera works and I'm pretty close on that. This is using stock kernel, I have not looked into 2ndboot yet. I'm also waiting on the kernel source from motorola. If there's intrerest still, one I get the cam working ill post it.
Click to expand...
Click to collapse
Do you have a cwm recovery for xt560?
superdave said:
I have a 2ndinit CM 7.2 port just about complete. Everything except the camera works and I'm pretty close on that. This is using stock kernel, I have not looked into 2ndboot yet. I'm also waiting on the kernel source from motorola. If there's intrerest still, one I get the cam working ill post it.
Click to expand...
Click to collapse
Excited to see this. Definitely still at least some interest.
Yeah, cwm works using 2ndinit. The rom is pretty stable, but, I still have not got the camera going. I'm closer though Everything else works and runs really fast off the sdcard. If I'm stuck too much longer, ill take a break and get a version without the cam posted.
Sent from my XT560 using xda app-developers app
the same old faces everywhere
will watch closely for this topic
Created a new thread with the rom here http://forum.xda-developers.com/showthread.php?p=49394355
superdave said:
Created a new thread with the rom here http://forum.xda-developers.com/showthread.php?p=49394355
Click to expand...
Click to collapse
not all of us can post there
maybe you should look into particulars(and post them) about instructions in number 2 and installing 2ndinit
Ok, sorry about that. The bootmenu installer takes care of installing the initial 2ndinit for you. The rom has 2ndinit built in for future boots. You just need to connect your rooted phone and run the batch file.
Sent from my XT560 using xda app-developers app
superdave said:
Ok, sorry about that. The bootmenu installer takes care of installing the initial 2ndinit for you. The rom has 2ndinit built in for future boots. You just need to connect your rooted phone and run the batch file.
Sent from my XT560 using xda app-developers app
Click to expand...
Click to collapse
maybe others can say something
tryied with and without adb, with and wihout drivers, with two different phones and with 2 xp pc.
maybe something is't right with installer, or it is necessary use other os or to install something for it to work?
The installer needs to access adb. So either set your path to include the adb location or copy adb to the same directory as the installer script.

[ROM][April13][KitKat][4.4.2] Beanstalk | Release 5 | bravo System wizard stop work

@Chromium I flashed the release 5. And i made how you say:
-flash the room
-boot
-flash gapp
-boot
After that Sistem wizard is stop working. What can i do please help @Chromium
Are you sure? I tested a few times and it worked fine. If you do a full wipe, flash the rom and boot it up is everything ok? (no gapps yet)
Chromium said:
Are you sure? I tested a few times and it worked fine. If you do a full wipe, flash the rom and boot it up is everything ok? (no gapps yet)
Click to expand...
Click to collapse
I tried again, same thing.
First 2 times i was flashing the rom without, boot and aftre that to flash the gapp.
After that i saw that you sad to flash,boot,flash gapp, boot. Same result.
Anyone have the same problem?
TheValnar said:
I tried again, same thing.
First 2 times i was flashing the rom without, boot and aftre that to flash the gapp.
After that i saw that you sad to flash,boot,flash gapp, boot. Same result.
Anyone have the same problem?
Click to expand...
Click to collapse
Try again:
- Full wipe
- Flash rom
- Reboot <-- Let it settle down a bit
- Go back into recovery and flash gapps
- Reboot
If its still not working, get me a logcat
Chromium said:
Try again:
- Full wipe
- Flash rom
- Reboot <-- Let it settle down a bit
- Go back into recovery and flash
- Reboot
If its still not working, get me a logcat
Click to expand...
Click to collapse
I'll try again. Sorry to bother you, but i need to see this realese improvements. VPN fix:silly:
This time i'll let it settle dow a little about 30-60 seconds.
And i'll give you the answer
No luck :|
I'd give you the logcat, but i don't know how
And this is how i won't see the new realese
TheValnar said:
No luck :|
I'd give you the logcat, but i don't know how
And this is how i won't see the new realese
Click to expand...
Click to collapse
Ok, i was just talking to someone that was having the exact same problem as you and it turned out that he wasnt properly doing a full wipe.
You need to format everything other than the sd. In 4ext the option for this is in wipe > format all partitions (except sdcard)
Make sure you do this.
Chromium said:
Ok, i was just talking to someone that was having the exact same problem as you and it turned out that he wasnt properly doing a full wipe.
You need to format everything other than the sd. In 4ext the option for this is in wipe > format all partitions (except sdcard)
Make sure you do this.
Click to expand...
Click to collapse
OK. I'll try this method too
And why don't you fix this, for the users to not go trough so much trouble ?
TheValnar said:
And why don't you fix this, for the users to not go trough so much trouble ?
Click to expand...
Click to collapse
1. Users arent really having to go through much trouble. The only difference now is that you need to reboot in between flashing the rom and gapps.
2. By slightly breaking the setup wizard, I seem to have been able to fix the WiFi bug where it would get stuck turning on. I would rather have better working WiFi that I constantly use, than a perfectly working setup wizard which I only use once. Im sure the majority of other users feel the same.
you're right. I just said. Don't be mad on me :|
And finally it started . Hell yeah :highfive:
Thx for the somthest,fastest,stable 4.4 rom :>
hell yeah.
TheValnar said:
you're right. I just said. Don't be mad on me :|
And finally it started . Hell yeah :highfive:
Thx for the somthest,fastest,stable 4.4 rom :>
hell yeah.
Click to expand...
Click to collapse
Haha, not mad, just explaining. Have fun
VPN Issues
Greetings, I have installed Beanstalk 4.4.2 on my 4 years old Desire just few days ago. So far so good, it is great, fast, it really revived my smartphone. But ...
What is the reason no form of VPN works on it? I have some prepaid solution and its app doesn't work. OpenVPN doesn't. PP2P/L2TP solutions don't work. Is it system bug which needs fix or am I doing anything wrong?
Thanks for answer.
Skottz said:
Greetings, I have installed Beanstalk 4.4.2 on my 4 years old Desire just few days ago. So far so good, it is great, fast, it really revived my smartphone. But ...
What is the reason no form of VPN works on it? I have some prepaid solution and its app doesn't work. OpenVPN doesn't. PP2P/L2TP solutions don't work. Is it system bug which needs fix or am I doing anything wrong?
Thanks for answer.
Click to expand...
Click to collapse
It needs kernel 3 which fixes that and camera and otherstuff but that's still in development.
Sent from my HTC Desire HD A9191 using XDA Free mobile app
lilsafbig said:
It needs kernel 3 which fixes that and camera and otherstuff but that's still in development.
Sent from my HTC Desire HD A9191 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry to ruin it for you but camera will not be fixed with K3 release, if it will be released anytime which I highly doubt anymore. It is a matter of unreleased sources and libs by HTC, so the best we will get is what we already have, camera-wise. So long story short, if you want fully functional camera and video recording, GB is the only way or that chinese ICS released sometime ago.
Tapatalked
So if I want fully functional and fast HTC Desire I should go for Mild Wild or pure CM? What is the difference between cm based and redux based MW? Thanks.
Odoslané z TF300T pomocou Tapatalku
I would recommend Mildwild MW rom based on redux2.
Skottz said:
What is the difference between cm based and redux based MW?
Click to expand...
Click to collapse
They're just slightly different ROM bases. Install both, see which one you prefer
It's the best way to find out, unlike recommendations without justifications as above..
Remember you can maximise space much better with either of those ROMs as they into smaller hboots
CM version will fit into cm7r2, redux should fit into oxygenR2, check the threads.
kostelo said:
Sorry to ruin it for you but camera will not be fixed with K3 release, if it will be released anytime which I highly doubt anymore. It is a matter of unreleased sources and libs by HTC, so the best we will get is what we already have, camera-wise. So long story short, if you want fully functional camera and video recording, GB is the only way or that chinese ICS released sometime ago.
Tapatalked
Click to expand...
Click to collapse
Yh but didn't Qualcomm release adreno 200 drivers? I'm sure they did.
Sent from my HTC Desire HD A9191 using XDA Free mobile app
Qualcomm has nothing to do with camera, unfortunately.

[ROM][NON-COMPLETED]Geodev 1.0

First of all, Hello all!
Me, and my bro, @topuchi13 are going to build a new ROM...
We're starting it in about a week ( That's because my bro is busy and he has not got time for that now).
We need your help...
Here is who we need: Testers, A guy who can make a good review, 1 more guy who has got HTC Desire 300 and can help me developing a new ROM.
Just reply to thread if you want to be one of these guys
Testers: @luxb
@ffroms
Sent from my GT-N7000 using XDA Premium 4 mobile app
I might be able to test.
luxb said:
I might be able to test.
Click to expand...
Click to collapse
OK, you are added to tester list
I can help with some beta testing but, since this is my job phone I can test only versions with basic functions working (phone, internet, mail) so that my job don't suffer
ffroms said:
I can help with some beta testing but, since this is my job phone I can test only versions with basic functions working (phone, internet, mail) so that my job don't suffer
Click to expand...
Click to collapse
Added
Sent from my GT-N7000 using XDA Premium 4 mobile app
hello,,i'm ali
i just want to ask, are you already have cwm recovery ?
ali.filth said:
hello,,i'm ali
i just want to ask, are you already have cwm recovery ?
Click to expand...
Click to collapse
Yes, but it has graphical glitches and some functions don't work.
luxb said:
Yes, but it has graphical glitches and some functions don't work.
Click to expand...
Click to collapse
Can you give me the boot.img from this device ?
ali.filth said:
Can you give me the boot.img from this device ?
Click to expand...
Click to collapse
Do you need the stock one or will the cwm one be ok?
luxb said:
Do you need the stock one or will the cwm one be ok?
Click to expand...
Click to collapse
just give me original boot.img
can you try this and tell me if it boots or not ?
recovery : philz_touch_6.49.2-zaramini
ali.filth said:
just give me original boot.img
can you try this and tell me if it boots or not ?
recovery : philz_touch_6.49.2-zaramini
Click to expand...
Click to collapse
Sorry, I don't have the original. I've flashed the custom one a while ago.
I'm not sure I can test it, I'm on vacation right now and don't have my PC with me.
DroidTwe4kz said:
First of all, Hello all!
Me, and my bro, @topuchi13 are going to build a new ROM...
We're starting it in about a week ( That's because my bro is busy and he has not got time for that now).
We need your help...
Here is who we need: Testers, A guy who can make a good review, 1 more guy who has got HTC Desire 300 and can help me developing a new ROM.
Just reply to thread if you want to be one of these guys
Testers: @luxb
@ffroms
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I CAN test if its not bricking my phone after flashing correctly
I can try to do a video review, a written one with screenshots and photos is possible at any time
I can't help developing since i don't have a proper pc to do so
Still working on the S-OFF method?
What kind of ROM are you building ? Aosp or sense ? and what are the prerequisite the phone has to have in order to test ? (Since there's no s-off yet I guess some other things have to be done)
My girlfriend has got this phone and its slow as hell so maybe I can be a tester with her phone if its still usable afterwards but I think she'd agree anyway cause the device is making her crazy also I can only start testing after august 6th cause we're on holiday right now
I would be happy to help you guys with testing any ROM. Still Desire 300 can be only S-ON. I hope you are going to compile AOSP ROM. Also i got request - If you are really going to make AOSP ROM would you use Linaro 4.9 by @Christopher83 , @JustArchi optimizations, -O3 optimizations, Link Time Optimizations. Lets get this phone working again because with stock firmware is just awful.
qtoo941 said:
I would be happy to help you guys with testing any ROM. Still Desire 300 can be only S-ON. I hope you are going to compile AOSP ROM. Also i got request - If you are really going to make AOSP ROM would you use Linaro 4.9 by @Christopher83 , @JustArchi optimizations, -O3 optimizations, Link Time Optimizations. Lets get this phone working again because with stock firmware is just awful.
Click to expand...
Click to collapse
I wouldn't say its awful, its just that sense isnt the quickest thing on a dualcore
. i would like to have the full sense as well bc only 2 home screens is just not enough ... Good thing is droidtwe4kz is working on s-off too
LukeHorizon said:
I wouldn't say its awful, its just that sense isnt the quickest thing on a dualcore
. i would like to have the full sense as well bc only 2 home screens is just not enough ... Good thing is droidtwe4kz is working on s-off too
Click to expand...
Click to collapse
My sister bought brand new Desire 310 and used it exactly one week. After that she went back to my old Samsung Galaxy S Plus I9001 (using CM 11.0 Release 10 by ADC-Team & K^Kernel 416 RAM by ADC-Team). This old device is single core phone with 512 ram and it is totally better in every way compared to Desire 310. She asked me to do something with her HTC but first i need to find any ROM. That's why i would like to help with tests.
qtoo941 said:
My sister bought brand new Desire 310 and used it exactly one week. After that she went back to my old Samsung Galaxy S Plus I9001 (using CM 11.0 Release 10 by ADC-Team & K^Kernel 416 RAM by ADC-Team). This old device is single core phone with 512 ram and it is totally better in every way compared to Desire 310. She asked me to do something with her HTC but first i need to find any ROM. That's why i would like to help with tests.
Click to expand...
Click to collapse
Well this is not Desire 310 but desire 300. The Desire 310 has a MediaTek Quadcore SoC with 1.3Ghz and 1GB ram, running a slightly modified AOSP rom. I can tell you this device HAS to be faster than the S plus of your sister. It is, check it. There currently no ROM available for 310 because of the Mediatek SoC. It's rootable via Framaroot using the Boromir exploit. DO NOT FLASH ANY ROMS, THERE ARE NONE
LukeHorizon said:
Well this is not Desire 310 but desire 300. The Desire 310 has a MediaTek Quadcore SoC with 1.3Ghz and 1GB ram, running a slightly modified AOSP rom. I can tell you this device HAS to be faster than the S plus of your sister. It is, check it. There currently no ROM available for 310 because of the Mediatek SoC. It's rootable via Framaroot using the Boromir exploit. DO NOT FLASH ANY ROMS, THERE ARE NONE
Click to expand...
Click to collapse
Ahhh, my fault. I meant Desire 300 I don't know why i wrote 310, anyway. Still I9001 > 300 !
qtoo941 said:
Ahhh, my fault. I meant Desire 300 I don't know why i wrote 310, anyway. Still I9001 > 300 !
Click to expand...
Click to collapse
Yeah that can be true ... CM boosts phones ... I'm sure CM on this phone would make it faster
We're making 4.4 ROM, I think it will be based on CM

Categories

Resources