Related
Hi there, I'm new to the forum but have been rooting for about a year. Here is my problem...
I was running stock firmware on my SGS3 and went through the standard cm10 root/rom install process. I flashed CMW with Odin, booted to recovery, installed cm10, jb gapps, cleared cache and delvik cache and rebooted. All the above processes worked fine and once it boots into JB, nothing seems to work. My home button does nothing, the top status bar is blank, no wifi, no keyboard (the process just crashes when I attempt to type).
I know this isn't an issue with CM10 on the SGS3 as this works for most people but does anyone have any ideas on how to remedy this? This may be a unique issue as I can't seem to find anyone else experiencing this.
Also...
I should also mention that I've tried a restore in recovery, reinstalled cm10, blah blah blah, and same results. I've also tried the cm10.m2 roms with the identical results. After reboot I don't even get the welcome wizard. It just boots right into the blank, default JB home screen and starts popping up process failure errors. I can navigate around (though the home button doesn't work) but can't use the keyboard etc.
Am I missing something? Is there a way for me to do a clean restore and try again?
Some technical info:
ClockworkMod Recovery v5.8.4.7
cm-10.0.0-d2att.zip
gapps-JB-20121130-signed.zip
Did you do a complete wipe? Data, cache, Davlik , System and then install cm10.
Coming from stock you need to fully wipe.
Sent from my SAMSUNG-SGH-I747 using xda premium
Machoscrawn said:
I should also mention that I've tried a restore in recovery, reinstalled cm10, blah blah blah, and same results. I've also tried the cm10.m2 roms with the identical results. After reboot I don't even get the welcome wizard. It just boots right into the blank, default JB home screen and starts popping up process failure errors. I can navigate around (though the home button doesn't work) but can't use the keyboard etc.
Am I missing something? Is there a way for me to do a clean restore and try again?
Some technical info:
ClockworkMod Recovery v5.8.4.7
cm-10.0.0-d2att.zip
gapps-JB-20121130-signed.zip
Click to expand...
Click to collapse
Your clockworkMod is out of date to run CM10 & the gapps. Upgrade to the latest clockwork mod, then the latest CM then the latest Gapps and you should be good to go.
dynamiclynk said:
Did you do a complete wipe? Data, cache, Davlik , System and then install cm10.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks for the reply. This is what I did...
(Main cwm menu) -wipe cache partition
(Advanced) -wipe dalvik cache
+++go back+++
-reboot system now
Is there something additional I should clear?
Kweli87 said:
Your clockworkMod is out of date to run CM10 & the gapps. Upgrade to the latest clockwork mod, then the latest CM then the latest Gapps and you should be good to go.
Click to expand...
Click to collapse
Thanks for the reply,
How do i update to the latest clockworkMod? Do you happen to have a URL? I think I found the latest 6.something, but they all seem to be in .iso format.
You can't go from stock rom to CM10 without clearing factory reset thing in CWM.. I don't know the exact text string it uses but it should be right on top of clearing cache.. It looks like you only cleared cache and flashed a new rom.
i386W7 said:
You can't go from stock rom to CM10 without clearing factory reset thing in CWM.. I don't know the exact text string it uses but it should be right on top of clearing cache.. It looks like you only cleared cache and flashed a new rom.
Click to expand...
Click to collapse
Sorry I may have missed mentioning that. The first thing I did was the -factory restore/reset
If updating CWM doesn't help, I'd recommend re-downloading the CM10 zip and verifying the MD5 hash. It could be that the download got corrupted somehow...
goodtimes50 said:
If updating CWM doesn't help, I'd recommend re-downloading the CM10 zip and verifying the MD5 hash. It could be that the download got corrupted somehow...
Click to expand...
Click to collapse
Two questions:
1) What is the best way for me to update cwm?
2) I've seen this MD5 hash recommendation here and there. I have no idea what that means. How would I "verify the MD5 hash".
Machoscrawn said:
Two questions:
1) What is the best way for me to update cwm?
2) I've seen this MD5 hash recommendation here and there. I have no idea what that means. How would I "verify the MD5 hash".
Click to expand...
Click to collapse
Flash one of the rooted stock ROMs. Preferably an ICS one since you are on an older cwm. Wipe data, cache, dalvik. Download ROM manager from the play store. Update your recovery to the latest through that. Than flash back to cm10.
BAM1789 said:
Flash one of the rooted stock ROMs. Preferably an ICS one since you are on an older cwm. Wipe data, cache, dalvik. Download ROM manager from the play store. Update your recovery to the latest through that. Than flash back to cm10.
Click to expand...
Click to collapse
Ok thanks! I'm going to give that a shot and see how it goes.
Machoscrawn said:
Ok thanks! I'm going to give that a shot and see how it goes.
Click to expand...
Click to collapse
Ok so I tried flashing a stock rooted ICS ROM and now I'm stuck on the Samsung logo boot screen. Here is the method I tried, using Odin. http://forum.xda-developers.com/showthread.php?t=1739426
I used the "Bell Image (This works with Canadian Virgin Mobile SGH-I747M) - Old Image I747MVLALH1 (ICS 4.0.4)"
After flashing I booted into the stock recovery and cleared the cache partition then rebooted. Still stuck on the Samsung boot screen.
UPDATE: I just let it sit on the Samsung logo boot screen and it eventually loaded into ICS.
Machoscrawn said:
Two questions:
1) What is the best way for me to update cwm?
2) I've seen this MD5 hash recommendation here and there. I have no idea what that means. How would I "verify the MD5 hash".
Click to expand...
Click to collapse
1) I believe Rom Manager (from the Play Store) can do this.
2) Basically an MD5 value is generated when the file is created and is usually listed on the download page (on get.cm look for "md5sum" right under the download link for each build). There are apps that create an MD5 value from the file that you download and compare against the original to ensure that it's intact. If the values don't match, something's wrong with the file. Check out FastSum (there are lots of others out there too).
goodtimes50 said:
1) I believe Rom Manager (from the Play Store) can do this.
2) Basically an MD5 value is generated when the file is created and is usually listed on the download page (on get.cm look for "md5sum" right under the download link for each build). There are apps that create an MD5 value from the file that you download and compare against the original to ensure that it's intact. If the values don't match, something's wrong with the file. Check out FastSum (there are lots of others out there too).
Click to expand...
Click to collapse
Ok cool. Well i have downloaded ROM Manager but when I try to flash the latest recovery and it gives me a list of devices, mine isn't there. The only S3 listed is "Galaxy S3 (MetroPCS)". The list itself looks incomplete, maybe only 20 devices listed. I've rebooted the phone since installing ROM Manager but the list still only shows the one SGS3.
Machoscrawn said:
Ok cool. Well i have downloaded ROM Manager but when I try to flash the latest recovery and it gives me a list of devices, mine isn't there. The only S3 listed is "Galaxy S3 (MetroPCS)". The list itself looks incomplete, maybe only 20 devices listed. I've rebooted the phone since installing ROM Manager but the list still only shows the one SGS3.
Click to expand...
Click to collapse
Try to download GooManager and select the Flash Roms option, it will prompt you, select *Find one for me* reboot into recovery try to wipe/reset and reinstall the ROM and gapps and see if it works
wally3614 said:
Try to download GooManager and select the Flash Roms option, it will prompt you, select *Find one for me* reboot into recovery try to wipe/reset and reinstall the ROM and gapps and see if it works
Click to expand...
Click to collapse
Ok I tried the Goomanager route. When I'm in recovery doing the install of the rom, I get a FAILED error right after it tries updating partition... I've tried installing from internal and external sd with the same results...
I've attached a screenshot. Well I attempted to with my webcam, hopefully it's semi-readable.
Machoscrawn said:
Ok I tried the Goomanager route. When I'm in recovery doing the install of the rom, I get a FAILED error right after it tries updating partition... I've tried installing from internal and external sd with the same results...
I've attached a screenshot. Well I attempted to with my webcam, hopefully it's semi-readable.
Click to expand...
Click to collapse
Well at least you have the proper twrp definitely try and re download the ROM, carefully make sure it is absolutely the correct ROM(I rushed once, thought I was sure n dl'd the wrong one and bricked my older s3) if u have the slightest break during DL this can happen. I KNOW it is frustrating but worth it in the end
wally3614 said:
Well at least you have the proper twrp definitely try and re download the ROM, carefully make sure it is absolutely the correct ROM(I rushed once, thought I was sure n dl'd the wrong one and bricked my older s3) if u have the slightest break during DL this can happen. I KNOW it is frustrating but worth it in the end
Click to expand...
Click to collapse
Alright, I downloaded the latest stable (the only one) build of CM 10 from get.cm. Removed the current version from my internal sd and tried the process again. Same error...
So again, I'm now using GooManager, TeamWin Rocovery v2.3.1.0, CM10 Stable. Doing a factory reset, then wiping system, then install cm10, this is where it fails.
Any way that I can restore everything on my phone completely to stock and start from scratch? Anything else you/anyone can recommend?
Machoscrawn said:
Alright, I downloaded the latest stable (the only one) build of CM 10 from get.cm. Removed the current version from my internal sd and tried the process again. Same error...
So again, I'm now using GooManager, TeamWin Rocovery v2.3.1.0, CM10 Stable. Doing a factory reset, then wiping system, then install cm10, this is where it fails.
Any way that I can restore everything on my phone completely to stock and start from scratch? Anything else you/anyone can recommend?
Click to expand...
Click to collapse
If youre looking to completely start over. Just grab an unrooted stock .tar from one of the links somewhere around here, put your phone in download mode and let it flash. Clean slate.
I've been wanting to upgrade my Tmobile S3 sgh-t999 to any of the 4.2 ROM that I could find in XDA, but when I tried to flash it from recovery, it always come back with "Installation aborted".
I tried upgrading to LiquidSmooth ROM, PAC-man ROM, CM10.1 and so on. still same.
I did place the zip files on my ext SD card and I'm able to see them when in recovery mode. I do wipe data, cache, dalvik and so on on each attempt, but still same..
If I did try with any of the new ROMs that required Google Apps to be flashed, if I would try flashing the Google app zip files first, that went successfully, but not the other zip file.
I'm a newbee, so I know I might be doing something wrong, although I have done upgrades before and was successful (but on Sprint phones)
My phone right now has 4.1.1 BUILD # JRO03L T999UVDLJA. Would it help if I go to STOCK rom for the upgrade? and which stock should I go down to if necessary?
Any suggestions?
I would check the zip file is good file first. check with MD5 checker to find out Maybe bad/incomplete download?
Or did you try reflashing recovery?
If you can flash gapps, I'm assuming you just need to verify that zip you downloaded.. Again I Can't see it so just an assumption..
Or start over by flashing stock and reroot it?
Sent from my SGH-T999 using xda premium
Your rom may be corrupted due to a bad download or your recovery may be out of date so I recommend redownloading the ROM, making sure it does complete and intended for your specific device, and if possible check for an MD5 sum on the ROM. Also, if on TWRP recovery (recommended) you may wanna download Goomanager from the Play Store and check to see if your recovery needs updating by tapping the menu key and selecting "Install openscript recovery". See if that helps bud.
Sent from my Galaxy Nexus using xda premium
Your recovery could be out of date, check if update is available
Sent from my SGH-T999 using xda premium
Successful install finally
I really have to thank you and all the others for their quick responses.
I did try different thinks after seeing the various responses:
..downloading MD5 checkers on both PC and phone, updating the recovery software and others..
But what I liked the most was.. I went to the goo.im site, selected the CM10.1 ROM, it expands and shows not only the MD5 # so I can verify it, but had a barcode, so I downloaded it directly to my phone and when done, i used the hash checker on the phone and the MD5 that was showing on the website matched the hash checker, so I went ahead and started the process and it did install successfully.
Noticed that Google play was not there so I also flashed the GPlay app.
It seems nice, even though I might back it up and then try another ROM to see which one I like the best.
Any suggestions on which is the most stable and improves both battery and other performances, while also giving you some cool tools or software?
Anthony
alomenzo said:
I've been wanting to upgrade my Tmobile S3 sgh-t999 to any of the 4.2 ROM that I could find in XDA, but when I tried to flash it from recovery, it always come back with "Installation aborted".
I tried upgrading to LiquidSmooth ROM, PAC-man ROM, CM10.1 and so on. still same.
I did place the zip files on my ext SD card and I'm able to see them when in recovery mode. I do wipe data, cache, dalvik and so on on each attempt, but still same..
If I did try with any of the new ROMs that required Google Apps to be flashed, if I would try flashing the Google app zip files first, that went successfully, but not the other zip file.
I'm a newbee, so I know I might be doing something wrong, although I have done upgrades before and was successful (but on Sprint phones)
My phone right now has 4.1.1 BUILD # JRO03L T999UVDLJA. Would it help if I go to STOCK rom for the upgrade? and which stock should I go down to if necessary?
Any suggestions?
Click to expand...
Click to collapse
myowin said:
I would check the zip file is good file first. check with MD5 checker to find out Maybe bad/incomplete download?
Or did you try reflashing recovery?
If you can flash gapps, I'm assuming you just need to verify that zip you downloaded.. Again I Can't see it so just an assumption..
Or start over by flashing stock and reroot it?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
If you want stability with lots of customization/features and good battery life I HIGHLY recommend trying out the ROOTBOX ROM, new updated version 3.8 that you can find in the op here.
http://forum.xda-developers.com/showthread.php?t=2117372
The downloads section will take you to the Rootbox site with a list of devices. Find your model and click on ”Official Releases” and it will take you straight to goo.im. If you happen to have battery issues with the default kernel you can always flash another one.
Sent from my Galaxy Nexus using xda premium
Every time I try to download the link, whether to my PC or my phone the zip is invalid.
I can't seem to download and flash ANY custom ROM to my Note 3. I am rooted, running TWRP. I have tried XNote, DarthStalker, Jedi etc. I keep softbricking the phone.
This time while trying to flash XNote I made a backup via TWRP and could not even install it after softbrick with XNote.
I keep having to download stock firmware form SAMMOBILE and flash via ODIN, therefore losing all of my data.
If any more info is needed please let me know and thanks in advance.
Need more info.
What version of recovery are you using?
Are you verifying the md5 before trying to flash to ensure that the rom you downloaded is 100% complete?
RE:
Thanks for your response.
I am unsure on the version, I currently downloaded the 2.6.3.8 and will be flashing after I get the stock MD5 flashed.
Maybe that's the issue.
It will not even connect to Kies ATM.
Hopefully I can flash the stock image because I already had one on file and could not flash it, it stated T Mobile unverified in Odin. I did rename the file so I wonder if that had something to do with it, lol.
Thanks
EDIT:
DarthStalker and Jedi:
Do not download as valid files to my PC or the phone. I used the links from this site.
XNote:
I did not verify the MD5 on first attempt, on the second attempt I did verify with success but it went to bootloop. The files I downloaded might not be valid.
I am frustrated with some links here, I was not registered and attempted to download DarthStalker, Jedi. For some reason my PC says the zips are not valid so I registered with same results. Currently attempting to download LabRats from this site.
re: download/flash rom
TillmanFam2007 said:
Every time I try to download the link, whether to my PC or my phone the zip is invalid.
I can't seem to download and flash ANY custom ROM to my Note 3. I am rooted, running TWRP. I have tried XNote, DarthStalker, Jedi etc. I keep softbricking the phone.
This time while trying to flash XNote I made a backup via TWRP and could not even install it after softbrick with XNote.
I keep having to download stock firmware form SAMMOBILE and flash via ODIN, therefore losing all of my data.
If any more info is needed please let me know and thanks in advance.
Click to expand...
Click to collapse
Here is the direct download link for the Darthstalker v4 note 3 custom rom:
http://m1.androidfilehost.com/downl...ame=DARTHSTALKER_NOTE3_V4.zip&action=download
Download it to your pc and then copy the zipfile to your internal sdcard.
After it's copied re-boot the phone and and flash the rom.
Be sure to do a complete wipe including DATA/SYSTEM/CACHE/DALVIK CACHE & FACTORY
RESET before flashing.
Good luck!
RE:
Thanks!
I was finally able to install a ROM.
LabRats was the only link I downloaded that has worked.
How would you compare DarthStalker and LabRats?
Not really a fan of all the Anarchy stuff but seems smooth so far.
I used to really enjoy JellyBam and I like Carbon on my Nexus 7, love the pie controls.
Thanks
I will try the link you provided, thanks again.
EDIT:
YOUR LINK IS NOT WORKING, SAYS JAVA IS NOT ENABLED?
Viper Mod
I could not be any more pleased with the Viper Sound Mod.
When I use my phone as an MP3 through my aux. jack it's like a freaking amp is installed to my coaxials and tweeters. I don't have a system yet but I installed some Polk DXI coaxials and all I can say is DAMN!
Great mod and props to the creator.
Opinions
Still cannot download other ROM's.
Currently running LabRats, only file that I was able to successfully flash.
RE:
Misterjunky said:
Here is the direct download link for the Darthstalker v4 note 3 custom rom:
http://m1.androidfilehost.com/downl...ame=DARTHSTALKER_NOTE3_V4.zip&action=download
Download it to your pc and then copy the zipfile to your internal sdcard.
After it's copied re-boot the phone and and flash the rom.
Be sure to do a complete wipe including DATA/SYSTEM/CACHE/DALVIK CACHE & FACTORY
RESET before flashing.
Good luck!
Click to expand...
Click to collapse
This link is no good.
RE:
I would post in the developer thread but my post count is too low.
This LabRats ROM is really stable, battery life is pretty good too.
I usually lime to flash ROM'S pretty frequent so I am curious about a few others.
Anyone have any input why I can't download Darthstalker or Jedi ROM'S?
THX
#10
Guess now I can ask the developer....
Currently running on AOKP OTA ver. 3.2
I would like to have someone who can guide me slowly step by step carefuly to whatever better option there is.
I been having lots of troubleshooting with phone not responding how it should and I have to keep rebooting to often.
I appreciate your help.
Thank you
Since you're running a custom rom, you could update your recovery to the latest CWM or TWRP and flash a different or updated rom.
Could you help me to do that?
Just guide me step by step.
Ok I already did a backup.
What custom recovery are you running? The first thing would be to get the latest img for your custom recovery and install it.
How did you root and install a custom recovery on your phone?
I am running AOKP OTA Ver. 3.2
That time I did it following a step by step guide with someone who was guiding me.
Hmm what else would you like to know?
That's the OS. What program did you use to backup your rom?
audit13 said:
That's the OS. What program did you use to backup your rom?
Click to expand...
Click to collapse
Oh…sure sure.
One I use is Team Win Recovery Project v2.4.1.0
You should update to the latest TWRP from here: http://teamw.in/project/twrp2/104
You can flash it using Odin. Make a full backup using the new TWRP. Find a rom you want to try, save it to the phone, and flash it using the ypdated TWRP. Don't forget to wipe the phone before changing ROMs.
audit13 said:
You should update to the latest TWRP from here: http://teamw.in/project/twrp2/104
You can flash it using Odin. Make a full backup using the new TWRP. Find a rom you want to try, save it to the phone, and flash it using the ypdated TWRP. Don't forget to wipe the phone before changing ROMs.
Click to expand...
Click to collapse
Ok So I delete the older TWRP get the new one.
Then back and wipe which of all the options?
And of course if I was using AOKP which I really liked, what will your recommend me?
Installing the latest version of TWRP will overwrite the version on your phone.
Install the newest version of TWRP, create a backup of your rom using the new version of TWRP, find a rom you like, copy the ROM to your phone, boot into TWRP, wipe cache, dalvik, data, flash the ROM, reboot.
audit13 said:
Installing the latest version of TWRP will overwrite the version on your phone.
Install the newest version of TWRP, create a backup of your rom using the new version of TWRP, find a rom you like, copy the ROM to your phone, boot into TWRP, wipe cache, dalvik, data, flash the ROM, reboot.
Click to expand...
Click to collapse
Ok perfect!
Thank you very much sir.
I will let you know when I'm done.
audit13 said:
Installing the latest version of TWRP will overwrite the version on your phone.
Install the newest version of TWRP, create a backup of your rom using the new version of TWRP, find a rom you like, copy the ROM to your phone, boot into TWRP, wipe cache, dalvik, data, flash the ROM, reboot.
Click to expand...
Click to collapse
Ok next is to find a nice rom, Any suggestions? (S3rx or SlimBean) keep in mind my device is an i747
Also do I use my computer to download the rom or should I use my phone directly?
I decided to go with Hyperdrive RLS16
Currently downloading it.
Will be flashing soon.
Harkadenn said:
Ok perfect!
Thank you very much sir.
I will let you know when I'm done.
Click to expand...
Click to collapse
Make sure to backup your apps with Titanium Backup.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
juanhbk1 said:
Make sure to backup your apps with Titanium Backup.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you for the warning.
Will do for the future.
Harkadenn said:
Ok next is to find a nice rom, Any suggestions? (S3rx or SlimBean) keep in mind my device is an i747
Also do I use my computer to download the rom or should I use my phone directly?
I decided to go with Hyperdrive RLS16
Currently downloading it.
Will be flashing soon.
Click to expand...
Click to collapse
You can download it directly to your computer and use Windows Explorer to copy it to a microSD card or directly to your phone. It's probably quicker to download a few to your computer and transfer them all at once so you can try different ones.
Have fun flashing ROMs.
audit13 said:
You can download it directly to your computer and use Windows Explorer to copy it to a microSD card or directly to your phone. It's probably quicker to download a few to your computer and transfer them all at once so you can try different ones.
Have fun flashing ROMs.
Click to expand...
Click to collapse
Ok as I extract the rom to my external sd card of my phone it's asking me many permissions such as:
"Do you want to copy Cesium.ogg to your device?
Your device might not be able play or view this file."
I said yes to skip all of the next warnings because every time i hit yes comes another warning.
Also strangely the rom took forever to download and the extraction is also taking way to long.
I didn't had to go through so much stuff by that time I downloaded AOKP rom. :/
Still extracting as I update this post... Something is not right...
I will have to cancel this.
It's stuck.
Do not extract the files. Just flash the zip.
audit13 said:
Do not extract the files. Just flash the zip.
Click to expand...
Click to collapse
Ah, to late I'm currently trying to find the right download link for Slim Bean rom.
Mind if you help me here?
My device is an I747.
UPDATE:
I believe is this one?
http://www.slimroms.net/index.php/d...o/6801-slim-d2att-4-3-build-2-2-official-1738
UPDATE!!
Yup it's done.
Thank you very much for your patience.
Quick question.
How do I restore all my phone data such as my contacts numbers and messages from the back up I did with the other rom?
Do I just restore the last backup and it should recognize the new rom?
UPDATE!
So it went back to where it was of course.
How should I back it all up and restore in the new rom?
Looks right. I have an i747m, not the i747.
Hi, hope my exact issue wasn't discussed after page 10 of the help & troubleshoot forum, anyway my rooted, unlocked cwm recovery stock 4.2 yakju (if I remember well) Samsung GNEX started to behave strangely slower then usual less then a week ago, then a couple of days later I woke up after night battery recharge to the boot up animation which never gave way to the operating system starting up.
After the first moment of despair I tried reading something here and with the use of adb I was able to first see the device and, after backing up via recovery, to pull the files from the phone (backup included). Problem is the 0 folder is very light for all the data and apps that I had, and inside the DCIM folder there's nothing, no trace of the 1k+ picture I shot in the past couple years, only an igc file which should have been in another folder. But strangely enough the backup weights almost 6GB which is consistent with what was inside prior to the crash.
Before attempting the backup I fiddled with recovery and tried to wipe cache, dalvik and fixing permissions, with no apparent results.
So now I'm undecided whether to take the phone to a samsung job centre which will surely wipe all data and possibly find out I have a corrupt memory or partition table, which renders many files and folders unavailable to be adb pulled or to wipe data/restore factory by myself hopying, fingers crossed, that the backup actually saved all my files and that could be restored without hassle. I actually had hoped that, like for the desktop environment, there was the possibility to awake my phone with a linux live or whatever to check if all files were present and downloadable before actually restoring the phone.
Thanks for your interest and help.
https://drive.google.com/file/d/0B8Pbk0TslYN6cm1wWWZydVM2V0k/edit?usp=sharing
Have you tried dirty flashing your rom?
Sent from my Galaxy Nexus using XDA Free mobile app
This is probably what I was thinking to do in the last sentence, I just have no idea how this could be done. Are there any videos explaining a dirty flash for gnex out there? Thanks for your help
Sent from my ASUS Transformer Pad TF300T using XDA Free mobile app
berniefranz said:
This is probably what I was thinking to do in the last sentence, I just have no idea how this could be done. Are there any videos explaining a dirty flash for gnex out there? Thanks for your help
Sent from my ASUS Transformer Pad TF300T using XDA Free mobile app
Click to expand...
Click to collapse
Its really easy. Just wipe cache and dalvik cache and then flash your rom (the same rom that is on the phone) again. Reboot.
Sent from my Galaxy Nexus using XDA Free mobile app
As far as I remember there is no identifiable rom files inside my GNEX memory, or wait, it seems I do already have a 6c7ff815e7762f651ad6f8c74e5cb281093f1e0b.signed-yakju-JWR66V-from-JDQ39.6c7ff815 zip in my download folder. So I need to clean cache and dalvik then install from zip. Do you know if this system wipes everything and I need to restore everything applying my hopefully working backup, or if it keeps all the files?
I'll try it tomorrow with fingers crossed.
Thanks again
mrgnex said:
Its really easy. Just wipe cache and dalvik cache and then flash your rom (the same rom that is on the phone) again. Reboot.
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
berniefranz said:
As far as I remember there is no identifiable rom files inside my GNEX memory, or wait, it seems I do already have a 6c7ff815e7762f651ad6f8c74e5cb281093f1e0b.signed-yakju-JWR66V-from-JDQ39.6c7ff815 zip in my download folder. So I need to clean cache and dalvik then install from zip. Do you know if this system wipes everything and I need to restore everything applying my hopefully working backup, or if it keeps all the files?
I'll try it tomorrow with fingers crossed.
Thanks again
Click to expand...
Click to collapse
Dirty flashing wont wipe any data. Only cache (which is only helpful with some speed). Cache will rebuild. If thats your rom. Dirty flash it. If it isnt. Adb push the right rom.
Sent from my Galaxy Nexus using XDA Free mobile app
Then I don't think the mentioned file is the my rom but a rom update I wanted to push myself but never did. Now, I'm definitely sure it was already JB, but which flavour? 4.2 JOP40C, 4.2.1 JOP40D or 4.2.2 JDQ39? I guess it should have been the last one, if I intended to update from JDQ to JWR (according to the file name), and I'm quite sure it was Jakju but just can't remember for sure. Is there a way via recovery or adb to check which was my rom? Or should I just close my eyes and download and flash JDQ39?
Again, thanks
mrgnex said:
Dirty flashing wont wipe any data. Only cache (which is only helpful with some speed). Cache will rebuild. If thats your rom. Dirty flash it. If it isnt. Adb push the right rom.
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
berniefranz said:
Then I don't think the mentioned file is the my rom but a rom update I wanted to push myself but never did. Now, I'm definitely sure it was already JB, but which flavour? 4.2 JOP40C, 4.2.1 JOP40D or 4.2.2 JDQ39? I guess it should have been the last one, if I intended to update from JDQ to JWR (according to the file name), and I'm quite sure it was Jakju but just can't remember for sure. Is there a way via recovery or adb to check which was my rom? Or should I just close my eyes and download and flash JDQ39?
Again, thanks
Click to expand...
Click to collapse
I know that TWRP default names a nandroid as the ROM build name/number and date. Don't know what cwm does for that as its been ages since I used it. You could install twrp and see what that tells you as the name of backup maybe to try and grab current ROM info.
Or using the file manager in recovery(twrp has one dunno about cwm) and see if you can look at the build.prop in /system which will have all relevant ROM information. If you can use adb in recovery try pulling /system/build.prop and looking at it. Right near top will be ROM build and info
Thanks, CWM doesn't have a file manager, but adb did actually pull the build prop id=JOP40D, so I'll go back to download the correct ROM and try to flash it..
ashclepdia said:
I know that TWRP default names a nandroid as the ROM build name/number and date. Don't know what cwm does for that as its been ages since I used it. You could install twrp and see what that tells you as the name of backup maybe to try and grab current ROM info.
Or using the file manager in recovery(twrp has one dunno about cwm) and see if you can look at the build.prop in /system which will have all relevant ROM information. If you can use adb in recovery try pulling /system/build.prop and looking at it. Right near top will be ROM build and info
Click to expand...
Click to collapse
small update, I managed to download the correct rom and I tried to adb push the .tar to the device (twice and attempting a third to /sdcard/ /sdcard/clockworkmod/ and now /sdcard/0/Download/) but still haven't been able to spot the uploaded file to choose for dirty flash. adb shows the file as uploaded , but again no sign of it with CWM Recovery. should I try to install TWRP recovery? with the nexus toolkit there is a function to flash a rom, but it says it will wipe the device first, so it's really not the option I was looking for. Another strange behaviour of CWM Recovery, or maybe my phone, inside mounts and storage menu, mount sdcard seems to be not working as it never changes to unmount after you click it. I think my memory went berserk and that's the reason why the phone rebooted and never woke up again. Maybe I'll take to the nearest job center to ascertain the damage...
thanks for all your help
berniefranz said:
Thanks, CWM doesn't have a file manager, but adb did actually pull the build prop id=JOP40D, so I'll go back to download the correct ROM and try to flash it..
Click to expand...
Click to collapse
installed TWRP and was able to see to rom.tar uploaded via adb in the download folder, but wasn't able to use to flash as probably both recovery wants .zip and not .tar, so I'll now untar and zip the stock rom and upload it again...
small steps...
had a md5 check fail during flash, so still no good news. I was surfing a bit when noticed that developers.google.com doesn't have a factory image for 4.2.1 jop40d but only for 4.1.2 jzo54k. Does this mean I should flash 4.1.2 and then update, or try directly for the 4.2.1 which I can't find (a working one)?
went back to CWM but installation failed as well as TWRP, so I guess my last option is to take it to a samsung job center to check whether I have a corrupted memory or else... ANyway thanks everybody for your support..
berniefranz said:
had a md5 check fail during flash, so still no good news. I was surfing a bit when noticed that developers.google.com doesn't have a factory image for 4.2.1 jop40d but only for 4.1.2 jzo54k. Does this mean I should flash 4.1.2 and then update, or try directly for the 4.2.1 which I can't find (a working one)?
Click to expand...
Click to collapse
Had to take it to the job center where, it was downgraded to 4.0.4 (have still to check which flavour) fixed something and Wiped everything. When I side about he post mortem backup and the intention to try a restore from there I was give an are you kidding look, it could crash again... sigh.
Anyway thanks everyone that spent some time to try and explain a noob how to try to solve this issue.. Now I've got a new galaxy nexus, so after a little grievance I'll start reading on how to flash a nice rom...
berniefranz said:
went back to CWM but installation failed as well as TWRP, so I guess my last option is to take it to a samsung job center to check whether I have a corrupted memory or else... ANyway thanks everybody for your support..
Click to expand...
Click to collapse