Develop Bugs

[Q] Clockwork Recovery

Hi, My DHD volume buttons no longer work and I've been reticent to send it off to get fixed as I can do with out the volume controls as opposed to being without a phone for 2-3 weeks.
However I used Rom manager to boot into CWR and was in the process of upgrading to revolution 5.2.4 from 5.1.8.
I ran the full wipe script then my fat fingers rebooted the phone rather than flashing the rom.
I now cant get back into CWR to flash the new rom. It just sits at the boot logo, obviously as all other partitions have been wiped.
Is there any other way I can force the phone to boot into CWR, perhaps using the sdk tools or similar?
I've tried adb devices, but it doesnt show up. Is there an external way to force the phone into flashing a new ROM or booting into CWRM ?
Thanks
Ron

I would like to help, first lets try using adb, command would be adb reboot recovery

Hi, thanks for the help.
As mentioned in OP. I have powered the phone on and have have already attempted this, but the device is not recognised by adb.
tools>adb reboot recovery
error: device not found
My question is how to get the device to be recognised if its simply sitting at the boot image?
R

Sorry I over looked that, it seems to me if adb (which is an sdk tool) won't recognize the device as being attached, i don't see any other sdk tool doing any different, also as far as I know there is no alternate method to scrolling through the boot loader that would allow you to choose recovery and flash a zip other then the volume keys , so it seems the solution is, to send the phone off, get the volume keys fixed, and then you will be able to get back into the boot loader, and select recovery, and reflash a rom. Other than that, I don't see any other method, if adb doesn't recognize the device as being plugged in, I am assuming you attempted to boot into boot loader as well, and see if adb recognized the device?
EDIT: stupid question you can't boot into boot loader without volume key

I just want to confirm that I need do nothing else other than configure the sdk and ENV path etc, such that if i can run adb and get the deafult output, eg switches fr command line options etc...
then all I should need to do is turn phone on and connect via usb to computer. I dont need to edit any config files for specific phone versions or whatnot?
If not then Ill try and bring it to a vodaphone shop and see if they can fix the volume button...
R

if you get the volume buttons fixed, we don't even need adb, I was simply thinking adb since your volume buttons are broken. Once the volume buttons are fixed, you simply need to boot into boot loader, then to recovery, mount USB mass storage, put a new rom on there, wipe the phone, flash the rom and your good

Good luck mate, do some mediation meanwhile and learn to keep patience, so when your phone is back, you can treat it gently while in the recovery.
You will be alright once your vol keys are fixed.

[Q] HTC One V Recovery doesn't work, Phone Stuck

Hi Y'all, sometime lurker, first time poster.
I got an HTC One V (CDMA, Virgin Mobile) today and given the relative ease of rooting my old Droid Inc I thought it would be a breeze to do this phone as well, but I did not do enough research and messed it up. Here is what I did as best as I can recall:
I unlocked the bootloader without a problem using Fastboot.
Then I flashed CWM recovery through hasoon2000's all in one tool, but it didn't work. I believe I did not flash the correct CWM (CDMA). I tried reflashing stock recovery, and then CDMA CWM recovery, but I couldn't get past the white HTC with the red warning message.
Because I couldn't get recovery to work, I thought maybe I should flash the kernel. I was using hasoon2000's all in one tool, but I did not realize that it would try to boot into recovery in the middle of flashing the kernel (yeah, I'm a noob and an idiot).
So now it won't load into the standard ROM anymore, it just gets stuck on the HTC White screen with the Red Warning. I can get it to load the bootloader, and I tried flashing the kernel from the all in one tool through fastboot, but it didn't work.
Is there any way I can save my phone or am I out of luck?
Thanks for any help you can provide.

Get the stock boot.img and put it in your fast boot folder and go to cmd prompt and type
C:\fastboot
Fast boot flash boot boot.IMG
Make sure your in fastboot
Sent from my One V using xda app-developers app

Thanks XxlemonxX. I did that a few times and it didn't seem to stick.
But! While I was fastloading I went ahead and did the Superboot step found here:
http://forum.xda-developers.com/showthread.php?t=1598964
And the phone restarted! Huzzah! Now I just have to see if I can get a recovery actually working...

OK, so things got a little strange.
The phone booted up just fine, so I tried flashing CWM recovery again. It worked, and restarted into CWM recovery. The power button didn't seem to work for selecting various options for a while, it would just go to the screen with the cog and the top hat, until I held it down for a few seconds, after which the bottom buttons flashed, and at the bottom it said "back button enabled". Then the power button worked for selecting various options. (I'm not sure if this is how CWM recovery is supposed to work for the One V, as I can't find any definitive answers...). Anyways, ran a backup through recovery, but afterwards the phone wouldn't reboot again.
Since it worked before I ran the Superboot app through windows and bam, starts up again. Did a factory reset just to see if that would clear the rebooting problem, but it didn't. It did change, however. Now it goes to the white HTC screen with the red warning for a second, goes back to black, then goes to a really dark black with just the red warning barely visible for about 7~ seconds, then it powers down. The only way I can get a reboot into the ROM is to redo the Superboot app...
I'm a little nervous at this point. I tried flashing an MIUI rom through the CWM app but there was an error (I didn't write it down, sorry), and I can't find a reliable link to the stock RUU VM PrimoC Rom (jmz's links are down as far as I can tell). I just want a rom that will reboot without freezing, haha. Thanks again for any help.
tl;dr Phone only boots when Superboot app is flashed, try a different rom?

jimmymcsnakes said:
OK, so things got a little strange.
The phone booted up just fine, so I tried flashing CWM recovery again. It worked, and restarted into CWM recovery. The power button didn't seem to work for selecting various options for a while, it would just go to the screen with the cog and the top hat, until I held it down for a few seconds, after which the bottom buttons flashed, and at the bottom it said "back button enabled". Then the power button worked for selecting various options. (I'm not sure if this is how CWM recovery is supposed to work for the One V, as I can't find any definitive answers...). Anyways, ran a backup through recovery, but afterwards the phone wouldn't reboot again.
Since it worked before I ran the Superboot app through windows and bam, starts up again. Did a factory reset just to see if that would clear the rebooting problem, but it didn't. It did change, however. Now it goes to the white HTC screen with the red warning for a second, goes back to black, then goes to a really dark black with just the red warning barely visible for about 7~ seconds, then it powers down. The only way I can get a reboot into the ROM is to redo the Superboot app...
I'm a little nervous at this point. I tried flashing an MIUI rom through the CWM app but there was an error (I didn't write it down, sorry), and I can't find a reliable link to the stock RUU VM PrimoC Rom (jmz's links are down as far as I can tell). I just want a rom that will reboot without freezing, haha. Thanks again for any help.
tl;dr Phone only boots when Superboot app is flashed, try a different rom?
Click to expand...
Click to collapse
That is an old cwm. thats how it operates. Once your booted into the system you can install rom manager from play store and then you can update cwm so you wont have to enable the power button for use. But anyway seems you cant boot into a stable system right now. So If you are willing to follow theses instructions you can get back to factory conditions.
1. get the fastboot package if you dont have it. http://www.mediafire.com/?4dx982z93w8z7wk and put those files in a folder in the C drive.
2. Get the ruu from here its the top one if you are virgin mobile US. http://www.filefactory.com/f/0eafb9c43276c308/ look for RUU_PRIMO_C_ICS_40A_Sprint_WWE_VM_1.08.652.6_Radio_1.00.00.0521_2_NV_VM_3.46_0503_PRL61008_release_262414_signed.exe
3. This is how your going to get the stock recovery and stock kernel. run the ruu but dont do anything with it just yet. After the ruu is opened and is at the welcome screen just click and drag the window down out of the way and open ANY folder and type %temp% in the address bar of that folder and press enter. You will see a bunch of folders with titles like this "{B2B09672-51AB-4EF6-BDDF-50CB9719052B}" This is just an example. While in that temp folder just do a search for rom.zip and when you find it you can copy that file to your desktop and then just click cancel in the ruu welcome screen for now.
4. Open the rom.zip file with 7zip. You must use 7zip. The built in windows zip program wont work. Once its opened with 7zip, extract these two files 'recovery_signed.img' and 'boot_signed.img'. This is your stock recovery and stock kernel. Extract those to the fastboot folder.
5. You must somehow get your device into the bootloader again. I had the same symptoms as you did with the dark screen and dim red text. I just kept playing with the volume down during boot and eventualy got there. DO NOT USE VOLUME UP!!
6. Once your in the bootloader choose fastboot and plug your device in and it should now say fastboot usb at the top of the bootloader screen. Now run theses commands.
7. Commands to run.
fastboot flash recovery recovery_signed.img
fastboot reboot-bootloader
fastboot erase cache
fastboot flash boot boot_signed.img
fastboot reboot-bootloader
fastboot erase cache
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
8. Now while in bootloader fastboot usb still just run the ruu and follow all instructions. Make sure you have atleast 30% battery while performing this. And if all goes well you will be back to square one.

Nexus 7 2013 stuck at Google screen

So, I was using my Nexus during my class today and it was working great.
After class, I walked to my next class with the tablet in my hand, I did not drop it or anything, when I got to my next class the lock screen was unresponsive.
I was still able to take a screen shot, so the tablet wasn't frozen, but the touch screen was not working at all. All of the hardware buttons worked fine.
I let it sit for about 2 hours and the problem persisted.
I just did a soft reset, holding the power button down for 10 seconds, and it shutdown and rebooted, but its now stuck on the Google screen.
Anyone know what is wrong or how I can fix it?
Thank you

See this thread: http://forum.xda-developers.com/showthread.php?t=2381582

krazzyjman said:
So, I was using my Nexus during my class today and it was working great.
After class, I walked to my next class with the tablet in my hand, I did not drop it or anything, when I got to my next class the lock screen was unresponsive.
I was still able to take a screen shot, so the tablet wasn't frozen, but the touch screen was not working at all. All of the hardware buttons worked fine.
I let it sit for about 2 hours and the problem persisted.
I just did a soft reset, holding the power button down for 10 seconds, and it shutdown and rebooted, but its now stuck on the Google screen.
Anyone know what is wrong or how I can fix it?
Thank you
Click to expand...
Click to collapse
Return it.
You have a defective unit.

[email protected] said:
Return it.
You have a defective unit.
Click to expand...
Click to collapse
Another one of many. ASUS quality control FTW.

anjelika said:
See this thread: http://forum.xda-developers.com/showthread.php?t=2381582
Click to expand...
Click to collapse
This thread doesn't work for me since my nexus is in a bricked like state

hard reset ?
hard reset always works for me. 20 seconds

krazzyjman said:
This thread doesn't work for me since my nexus is in a bricked like state
Click to expand...
Click to collapse
Have you tried entering bootloader?
[Info] Guide to entering safe mode, bootloader, stock recovery
I really doubt you are in bricked mode or it wouldn't even show google. If it is stuck on google it is having trouble loading the OS.
Most likely you can go into fastboot mode and just flash your /system and it will begin working again with no loss of data.

sfhub said:
Have you tried entering bootloader?
[Info] Guide to entering safe mode, bootloader, stock recovery
I really doubt you are in bricked mode or it wouldn't even show google. If it is stuck on google it is having trouble loading the OS.
Most likely you can go into fastboot mode and just flash your /system and it will begin working again with no loss of data.
Click to expand...
Click to collapse
My problem is I can't turn the tablet off. When I hold the power button it just restarts.
Also I tried the hard reset and it does nothing. Just stays on the Google screen

Is your device rooted? If not that is just rediculous on asus's part

slamdunksaliby said:
Is your device rooted? If not that is just rediculous on asus's part
Click to expand...
Click to collapse
My device is not rooted at all.
I've had it for 2 days.
I have to say, I am very disappointed in all of these issues.

I would return it..I'm sorry to hear that I have had troubles myself with two devices so far

krazzyjman said:
My problem is I can't turn the tablet off. When I hold the power button it just restarts.
Also I tried the hard reset and it does nothing. Just stays on the Google screen
Click to expand...
Click to collapse
Did you specifically try to get into bootloader mode using the post I mentioned.
You need to Press Power+VolDown continuously until the bootloader menu comes up?
The fact that you are getting to the Google screen at all means your bootloader is still working so I find it hard to understand why you wouldn't be able to get into bootloader mode.

sfhub said:
Did you specifically try to get into bootloader mode using the post I mentioned.
You need to Press Power+VolDown continuously until the bootloader menu comes up?
The fact that you are getting to the Google screen at all means your bootloader is still working so I find it hard to understand why you wouldn't be able to get into bootloader mode.
Click to expand...
Click to collapse
It was not working, but my tablet just died and I was able to charge and get into the bootloader.
Now to see if it will work.

sfhub said:
Did you specifically try to get into bootloader mode using the post I mentioned.
You need to Press Power+VolDown continuously until the bootloader menu comes up?
The fact that you are getting to the Google screen at all means your bootloader is still working so I find it hard to understand why you wouldn't be able to get into bootloader mode.
Click to expand...
Click to collapse
What do I do once into the bootloader mode?
Start, restart bootloader, or recovery?

krazzyjman said:
What do I do once into the bootloader mode?
Start, restart bootloader, or recovery?
Click to expand...
Click to collapse
Well since you are getting stuck on Google, that means your ROM (/system) is not loading.
I would flash boot.img and system.img from the factory restore.
http://developers.google.com/android/nexus/images#razor
The restore is in .tar.gz format and within the tar there is a zip file. Within that zip file is boot.img and system.img. You need to extract those (ungzip, then untar, then unzip) and place them in your adb directory.
Boot your tablet into bootloader mode, connect the USB cable, make sure it is recognized as android bootloader interface.
Type
fastboot flash boot boot.img
fastboot flash system system.img
assuming no errors
fastboot reboot
If on the reboot you still get stuck, push and hold Power for 30-60 seconds and try again.
Fails a second time, something more serious is probably wrong.
If you get stuck on X instead of Google, that means something may be wrong with your user data. Try the 60 second reboot thing again. If it is still stuck on X, boot into recovery and do a wipe data factory reset. See previous post for how to get into recovery.

sfhub said:
Well since you are getting stuck on Google, that means your ROM (/system) is not loading.
I would flash boot.img and system.img from the factory restore.
http://developers.google.com/android/nexus/images#razor
The restore is in .tar.gz format and within the tar there is a zip file. Within that zip file is boot.img and system.img. You need to extract those (ungzip, then untar, then unzip) and place them in your adb directory.
Boot your tablet into bootloader mode, connect the USB cable, make sure it is recognized as android bootloader interface.
Type
fastboot flash boot boot.img
fastboot flash system system.img
assuming no errors
fastboot reboot
If on the reboot you still get stuck, push and hold Power for 30-60 seconds and try again.
Fails a second time, something more serious is probably wrong.
If you get stuck on X instead of Google, that means something may be wrong with your user data. Try the 60 second reboot thing again. If it is still stuck on X, boot into recovery and do a wipe data factory reset. See previous post for how to get into recovery.
Click to expand...
Click to collapse
Where am I typing in those lines?
And all the files I need are in the download link?

sfhub said:
Well since you are getting stuck on Google, that means your ROM (/system) is not loading.
I would flash boot.img and system.img from the factory restore.
http://developers.google.com/android/nexus/images#razor
The restore is in .tar.gz format and within the tar there is a zip file. Within that zip file is boot.img and system.img. You need to extract those (ungzip, then untar, then unzip) and place them in your adb directory.
Boot your tablet into bootloader mode, connect the USB cable, make sure it is recognized as android bootloader interface.
Type
fastboot flash boot boot.img
fastboot flash system system.img
assuming no errors
fastboot reboot
If on the reboot you still get stuck, push and hold Power for 30-60 seconds and try again.
Fails a second time, something more serious is probably wrong.
If you get stuck on X instead of Google, that means something may be wrong with your user data. Try the 60 second reboot thing again. If it is still stuck on X, boot into recovery and do a wipe data factory reset. See previous post for how to get into recovery.
Click to expand...
Click to collapse
I figured out where to type, but I have to unlock my bootloader?

I have no way to enable usb debugging since I cant tun on the device, right?

krazzyjman said:
I have no way to enable usb debugging since I cant tun on the device, right?
Click to expand...
Click to collapse
You don't need to enable USB debugging for fastboot mode.
You just need to press Power+VolDown until you get into the bootloader. That is fastboot mode. It will install Android Bootloader Interface (usb debugging does android debug bridge interface)
I actually didn't realize you weren't unlocked. If that is the case, the unlock process will erase your userdata, so you might as well just do the full factory restore.
First goto bootloader mode using Power+VolDown and connect USB, type
fastboot oem unlock
You'll see a question on the tablet screen, Press VolUp to go to yes and Power to select.
On the command prompt in windows, you should see it erase userdata and cache.
On the bootloader screen it should have "Start" highlighted (if not, use VolDown to cycle until you see "Start"). Press Power to accept. You should see Google, then it'll go into recovery and format userdata and cache. It'll then try to boot and since /system is having issues, you'll be stuck in Google again.
Go back into bootloader mode, hold Power+VolDown for a while until you see the bootloader screen.
Now grab the factory image as above, gunzip, untar, and you should have a folder razor-jss15j
Copy these files from your adb directory to the razor-jss15j directory
adb.exe
fastboot.exe
AdbWinApi.dll
AdbWinUsbApi.dll
In command prompt in the razor-jss15j directory, type
flash-all
It should output a bunch of stuff, essentially writing a factory image to your tablet.
When it is done, it'll reboot and hopefully you'll get the initial setup window.
I wrote this up from memory, so hopefully I didn't forget stuff. If something doesn't seem right just ask.

Thanks for all of your help.
It really means a lot you took the time to help me.
I'm going to Best Buy today and I am going to see if I can do an exchange.
If not, I will try this later.
Again, thank you

Zenfone 2 bricked. Cannot access Recovery Mode.

Hello All,
I would like to start by saying that I am a novice when it comes to rooting phones so ANY help received here will be greatly appreciated. I have come across a few people within the various forums who have a very similar issue to the one I am having, but nothing exact. Now to the point.
Phone: Zenfone 2 (Model: ZE551ML-23-4G64GN-BK) came unlocked from amazon.com
Carrier: Metro PCS.
PC used to root: Win 7 64 bit / AV: Avast Free.
Issue: About 1 month ago I rooted my phone. Last night I received a prompt to do an OTA update, and selected install. I realized after that I shouldn't have done that, but it was too late. My phone would not load past the black and white ASUS loading screen.
I then proceeded to do some research online, and try to "unbrick" my phone myself. I figured out how to hold the power button + volume up key, select Recovery Mode with the power key, and press power + volume up again to get into the Recovery Mode. I was following some instructions online that didn't really make sense, which led me to choosing Wipe Cache Partition. This didn't work, so I had to manually reboot the phone (Hold the power key, and turn it back on). From that point forward I have been unable to get back into the Recovery Mode. Once I get to the sleeping android with the red triange I have tried holding power + volume up (which got me into recovery mode the first time), power + volume down, power + both volume up and down, I've rebooted my phone several times to make sure I was doing this as soon as the little android appeared and nothing happens. The android just pulses in and out and nothing happens. This is the first of my many problems as I have never flashed a ROM before, and I am a novice. Also my PC does not recognize my phone at all at this point. I'm using the same cable and port that I always use when transferring files. The port has been tested with a tablet and iPhone, which works. My questions are as follows:
1. Am I screwed? lol.
2. Is there a way/trick to getting into recovery mode again?
3. Can I still unbrick my phone without getting into recovery mode? Is there something I can do with my phone connected to the PC perhaps?
I would also like to mention the following:
1. I've downloaded firmware Version V2.20.40.160 from asus website. Is this the right "image" or 4 files I should be using to flash onto my phone?
2. I've also downloaded ADB, but it doesn't look like the 15 second one, and it does not detect my phone. What tools do I download in order to fix the issues I am having?
Thank you in advance!
Best regards,
Clavin0089

For anyone who may have found this thread I think I found a fix here. I will let you know after I test this if it works:
http:
//valuestuffz.blogspot.com
/2015/10/fix-zenfone-2
-stuck-in-recovery-wipe-cache-partition.html?m=1
Sorry. I had to break up the link in order to post it.

Clavin0089 said:
I would also like to mention the following:
1. I've downloaded firmware Version V2.20.40.160 from asus website. Is this the right "image" or 4 files I should be using to flash onto my phone?
2. I've also downloaded ADB, but it doesn't look like the 15 second one, and it does not detect my phone. What tools do I download in order to fix the issues I am having?
Thank you in advance!
Best regards,
Clavin0089
Click to expand...
Click to collapse
i was in same sit with a brick of sorts and used this guid to help me:
> http://www.asus-zenfone.com/2015/12/how-to-downgrade-asus-zenfone-2-firmware.html *** I used this to go from the 168/174 ( 174 didnt fix issue that 168 caused ) back to 160
> http://www.asus-zenfone.com/2015/03/zenfone-2-how-to-enter-recovery-wipe.html *** How to enter recovery if you dont know how
make sure the phone is plugged into a usb2 port and not a 3.0
what got me is when i installed adb, it put adb files in a default directory on my hdd, so i just copied the files to the folder where where i had all files at See below
i used the .160 file to restore my phone and it worked..
now if phone isnt detected yet, you may still need files. have you tried iSocUSB-Driver ?

I followed the steps outlined in the link:
http
://valuestuffz.blogspot.com/2015/10/fix-zenfone-2-stuck-in-recovery-wipe-cache-partition.html?m=1
And everything appeared to have gone smoothly, however, now my phone just loads, and will not enter the home screen. I just have that ASUS IN SEARCH OF INCREDIBLE screen now. I was able to get into the recovery mode, but it doesn't appear to have worked. I also received the "Permission denied" errors mentioned in the link. Any suggestions?
My phone is now detected by the PC for the record.

didn't know of that but it has same steps but one I linkd easier to read and doesn't have wall of text.....
did you push the 3 required files via adb on bootloader screen ?
if so did you push the rom file in recovery once you selected adb sideload from the list ?
remember you have to follow the instruct exactly and be on correct screen when you push the files....
first boot takes some time

Pu$$nBooT$ said:
didn't know of that but it has same steps but one I linkd easier to read and doesn't have wall of text.....
did you push the 3 required files via adb on bootloader screen ?
if so did you push the rom file in recovery once you selected adb sideload from the list ?
remember you have to follow the instruct exactly and be on correct screen when you push the files....
first boot takes some time
Click to expand...
Click to collapse
I did push over 3 files, but when I downloaded the .160, it only had droidboot.img,and boot.img. I tried both .168 (Which may have been totally wrong, but had all 3 files) and .160 from the asus website where you can select firmware. I did the .160 most recently. I put the recovery.img, droidboot.img, and boot.img into the adb folder, and ran the following CMDs:
Fastboot erase cache
fastboot flash fastboot droidboot.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
I then used adb sideload CMD to load the .160, and it reached 100% and said successful. I attached a screenshot of what the "permission denied" CMD looks like.

Pu$$nBooT$ said:
didn't know of that but it has same steps but one I linkd easier to read and doesn't have wall of text.....
did you push the 3 required files via adb on bootloader screen ?
if so did you push the rom file in recovery once you selected adb sideload from the list ?
remember you have to follow the instruct exactly and be on correct screen when you push the files....
first boot takes some time
Click to expand...
Click to collapse
Tonight after work I will try the links you suggested to me once more, and let you know the results. I sincerely appreciate all of your help here! Thank you very much!

anytime...
i never seen/encountered that error message before... try adb kill-server command if you run into any issues. when you start again it will load automaticaly... have you tried different usb ports? stay on usb2.0 when connected and try original oem cable that came with the phone. if you dont have it, try different micro-usb cables ( i had issues when i had my lg g3 being on a usb3 port, so i made sure mine was plugged in a 2.0 port )

Currently i am on beanstalk, and want to go back to stock.
I flashed the stock recovery via fastboot, but when i enter into Stock Recovery mode, it gives me Error icon.
The whole process is to flash the stock zip via sideload, but i am not able to enter the stock recovery.
The stock version i am trying to flash is 2.20.40.160.
I flashed all three files, Droidboot.img, recovery.img, boot.img.
And then turned the phone off, and now it is stuck on Asus screen. Urgent Help!!

btw when u see that error icon, nothing is actually wrong.... you have to hit 2 buttons simultaniously to enter recovery.
see > http://www.asus-zenfone.com/2015/03/zenfone-2-how-to-enter-recovery-wipe.html on step 6, this is normnal.. once u do button dance, you will enter step 7 and select flash via adb.. then you flash the rom file

Pu$$nBooT$ said:
btw when u see that error icon, nothing is actually wrong.... you have to hit 2 buttons simultaniously to enter recovery.
see > http://www.asus-zenfone.com/2015/03/zenfone-2-how-to-enter-recovery-wipe.html on step 6, this is normnal.. once u do button dance, you will enter step 7 and select flash via adb.. then you flash the rom file
Click to expand...
Click to collapse
Yeah, i looked it up, power + volume up. That did it. Thanks!

np...

Phone might be bricked. Need help to find a solution!

Hello everyone! Complete dumbass here!
I was following the guide to root my razer phone. I've had it for a couple months, and decided to root it. I followed the guide here https://forum.xda-developers.com/razer-phone/how-to/twrp-magisk-fullproof-guide-razers-wifi-t3756137
After a couple bumps in the road, such as fastboot commands not working, not being recognized, etc. I finally was able to unlock bootloader and install twrp. But it was #9 that got me stuck again.
"9.) Once in recovery, go to the install button, and select Install Zip, and select Magisk-v16.0.zip."
In recovery, adb devices and fastboot devices yielded no devices attached. Doing a search, I came across another forum post where it states the sdcard is encrypted and can't be accessed in twrp, and the fix is to do something like "Wipe>Wipe Data> Type Yes" and that should factory set the card. I did this and rebooted the device. I waited for a half hour for the animated PixelFloatingInACircle logo to be done with it's floating in a circle, but ended up going to bed and letting it die. Woke up this morning, plugged it in, got the razer logo splash screen with the orange text telling me of my impending doom, then went back to the animation. I let my dog out and came back and it was still on. I unplugged it and am letting it die again to see if there's another solution.
I'm wondering if anyone else came across this issue, and if so, how did they fix it? Any help would be appreciated.

Use the factory images in the developer portal. You have to manually install the fastboot driver or you won't see the phone in fastboot devices. After that you can flash_all.bat.
PS: if you just want root you can use magisk installer to patch the boot image (from the factory images) and then flash the patched_image.img. That's it, now you have root via magisk

waiflih said:
Use the factory images in the developer portal. You have to manually install the fastboot driver or you won't see the phone in fastboot devices. After that you can flash_all.bat.
PS: if you just want root you can use magisk installer to patch the boot image (from the factory images) and then flash the patched_image.img. That's it, now you have root via magisk
Click to expand...
Click to collapse
The problem is when I try to enter download/recovery mode after charging the battery a little, it doesn't go to that menu. Instead, it skips right to the particle logo, and that's where it hangs.
The only guide I saw was the one I listed. Is there a guide for this magisk installer?(Ya know, in case I figure the first problem out, so I might try my hand at potentially creating another)

i think there is a way to hard reboot the phone, so you can do that and then hold the vol- key to start in bootloader mode when it reboots.
gonna check the correct buttons.
Edit: the button combination is power+vol+ for about 10-15 seconds, and the phone will reboot. You have to connect the phone via usb cable (before rebooting) to the computer (the only thing i'm not sure is if you have to have the fastboot drivers in the pc installed previously or if you can do it after entering fastboot) and just after the screen goes black while hard rebooting you have to release all the buttons and then press and hold the vol- button. The combination of vol- and the usb cable on boot seems to trigger fastboot mode.
I think the guide is in the guides forum, but the way it worked for me was without twrp:
- install magisk manager from this link -> https://github.com/topjohnwu/MagiskManager/releases/download/v5.7.0/MagiskManager-v5.7.0.apk
- push your boot.img (the easiest way is getting it from the factory image corresponding to the firmware you are using) to the sdcard
- open magisk manager -> install -> patch image only -> boot.img
- this will generate a patched_boot.img in /sdcard/MagiskManager
- copy that file to your pc
- go to fastboot and flash that patched image: fastboot flash boot patched_boot.img
- enjoy root, and you can use magisk hide for apps that don't like root
Regards

waiflih said:
i think there is a way to hard reboot the phone, so you can do that and then hold the vol- key to start in bootloader mode when it reboots.
gonna check the correct buttons
Click to expand...
Click to collapse
Tried this originally after I let it die the first time. It still boot to the animation logo.

Bloodeagle said:
Tried this originally after I let it die the first time. It still boot to the animation logo.
Click to expand...
Click to collapse
Read the edit, I found that the trigger is having the usb cable connected to the pc. Try that, or you can also try to adb while the device is booting (particles logo). Sometimes adb is responsive even when booting. There you can try to adb reboot bootloader

waiflih said:
i think there is a way to hard reboot the phone, so you can do that and then hold the vol- key to start in bootloader mode when it reboots.
gonna check the correct buttons.
Edit: the button combination is power+vol+ for about 10-15 seconds, and the phone will reboot. You have to connect the phone via usb cable (before rebooting) to the computer (the only thing i'm not sure is if you have to have the fastboot drivers in the pc installed previously or if you can do it after entering fastboot) and just after the screen goes black while hard rebooting you have to release all the buttons and then press and hold the vol- button. The combination of vol- and the usb cable on boot seems to trigger fastboot mode.
I think the guide is in the guides forum, but the way it worked for me was without twrp:
- install magisk manager from this link -> https://github.com/topjohnwu/MagiskManager/releases/download/v5.7.0/MagiskManager-v5.7.0.apk
- push your boot.img (the easiest way is getting it from the factory image corresponding to the firmware you are using) to the sdcard
- open magisk manager -> install -> patch image only -> boot.img
- this will generate a patched_boot.img in /sdcard/MagiskManager
- copy that file to your pc
- go to fastboot and flash that patched image: fastboot flash boot patched_boot.img
- enjoy root, and you can use magisk hide for apps that don't like root
Regards
Click to expand...
Click to collapse
Progress! Got it into download mode. I have the boot.img I got from razer, should I push that and see if it boots normally?

Bloodeagle said:
Progress! Got it into download mode. I have the boot.img I got from razer, should I push that and see if it boots normally?
Click to expand...
Click to collapse
As you already wiped the data partition, you should use the flash_all script. But yes, you can try flashing each partition

waiflih said:
As you already wiped the data partition, you should use the flash_all script. But yes, you can try flashing each partition
Click to expand...
Click to collapse
I moved the flash_all script into the tools folder and after a little while, the phone booted up into setup! After a couple taps, I've realized the wifi isn't working, which I know is a known issue. I'm gonna let it sit for the night and finish it in the morning!
EDIT : Soooo, I know I said I was going to bed, but I decided to fix the wifi issue, which in turn, also rooted my phone. I've downloaded the root checker, and it confirms it! Thanks so much Waiflih! You rock!

Hi guys, it seems I'm having the same problem and basically after unlocking my bootloader and flashing twrp to both of my slots I'm stuck on "Your device has been unlocked and can't be trusted" booting up infinitely.
The USB plug in and holding the volume - button doesn't bring up "download mode" and no matter what buttons I try and press on my phone my computer doesn't recognize ANYTHING connected to it anymore.
Bloodeagle, how did you manage to get "download mode" back onto your phone? it seems like mine refuses to do anything like download mode.

saberhashemi said:
Hi guys, it seems I'm having the same problem and basically after unlocking my bootloader and flashing twrp to both of my slots I'm stuck on "Your device has been unlocked and can't be trusted" booting up infinitely.
The USB plug in and holding the volume - button doesn't bring up "download mode" and no matter what buttons I try and press on my phone my computer doesn't recognize ANYTHING connected to it anymore.
Bloodeagle, how did you manage to get "download mode" back onto your phone? it seems like mine refuses to do anything like download mode.
Click to expand...
Click to collapse
Have you tried holding few combinations of different butt9ns for a minute or two to see if that results in you getting in downl9ad mode?