Hey and hello here!
I'm rather new to flashing, etc. and have tried the JB leak. Great job on you guys there!!
Now I want to return to GB, also found a quite easy work thru by michal_ag, and flashing back to his Russian stock worked like a charm. Unfortunately I cannot install any GB version after that. Odin tells me, that I'm trying to flash a modded modem version and aborts (tried various stock roms from sammobile).
Soooo I'm back to JB, but I miss using bluetooth in a convenient way, not having to restart my phone each time to enable it for deep sleep, and the lack of NFC is a bit of a bugger, too.
Any suggestions for getting back to I8160PXX/DBT/LK2? Sorry I'm new and not yet allowed to post in the dev section cos of that.
Best regards,
primewell
primewell said:
Hey and hello here!
I'm rather new to flashing, etc. and have tried the JB leak. Great job on you guys there!!
Now I want to return to GB, also found a quite easy work thru by michal_ag, and flashing back to his Russian stock worked like a charm. Unfortunately I cannot install any GB version after that. Odin tells me, that I'm trying to flash a modded modem version and aborts (tried various stock roms from sammobile).
Soooo I'm back to JB, but I miss using bluetooth in a convenient way, not having to restart my phone each time to enable it for deep sleep, and the lack of NFC is a bit of a bugger, too.
Any suggestions for getting back to I8160PXX/DBT/LK2? Sorry I'm new and not yet allowed to post in the dev section cos of that.
Best regards,
primewell
Click to expand...
Click to collapse
Yeah, well maybe its because you have I8160P and good thing you're not allowed to post on dev... because this does not belong there.
Dr01nE said:
good thing you're not allowed to post on dev... because this does not belong there.
Click to expand...
Click to collapse
I actually wanted to reply on michal's thread.
Dr01nE said:
maybe its because you have I8160P
Click to expand...
Click to collapse
I'll take it as a "bummed cos you've got the nfc version, told you so newb, hahaha, etc" situation?
I took the chance, since I know some ppl flashing a 8160P to JB, and it worked fine. So I figured I might try the same non-P way to revert, since there is IMHO nothing at all to be found specificly for the 8160P.
primewell said:
I'll take it as a "bummed cos you've got the nfc version, told you so newb, hahaha, etc" situation?
I took the chance, since I know some ppl flashing a 8160P to JB, and it worked fine. So I figured I might try the same non-P way to revert, since there is IMHO nothing at all to be found specificly for the 8160P.
Click to expand...
Click to collapse
Nope. I didn't mean it that way.
As for the revert, you can try to find a full firmware for I8160P. the one that has CODE_REV...blahblahblah & CSC_REV...blahblablah. That's the only thing I can think of.
Oh wait, can you post what Odin shows?
I've been looking last night for a P firmware that consists out of two parts. I concluded that from michal's thread, too (that's why he took the Russian version, cos only fw that has more than one package, blablalba).
In Odin it goes through all the operations as it should (flashing cache.img, etc) but when it gets to modem.img it gives:
Code:
...
<ID:/003> modem.img
<ID:/003> Complete(Write) operation failed
<OSM> All threads completed. (succeed 0 / failed 1)
And on the hand held screen it says in red "modem custom", the mobile freezes, and revival increases the flashcounter by one. I'm back to JB for the day and am downloading various fw in hope of getting one with multiple files...
UPDATE: Have been looking around, and so far the fw for 8160P is always a single data file. Szaby59 posted a pre-rooted fw for 8160P, as far as I can tell it includes the PDA and CSC file by soraxx.
I'll try and get hold of a file package and try to flash back to GB. Maybe it'll work. Up to now my Ace 2 NFC seems pretty brick-safe. At least I wasn't able to brick it, and I've played about with it more than one should. But it's really sad, that the 8160P is a low "really low" activity device - it bears such goodness in its tech
Hey. This could be a stupid suggestion but why dont you try and take modem from 8160P gw and replace XXLK6 modem.. Just curious
Sent from my GT-I8160 using xda app-developers app
Dr01nE said:
Hey. This could be a stupid suggestion but why dont you try and take modem from 8160P gw and replace XXLK6 modem.. Just curious
Click to expand...
Click to collapse
I thought about that myself, but I'm axious that that could actually brick my phone in the sense of being basically unflashable. And I do not now how to create/compile a new md5-file. With what application should I do this? Winrar and 7zip only allow viewing and extraction.
after downgrade + flashing stock rom - no baseband
primewell said:
I thought about that myself, but I'm axious that that could actually brick my phone in the sense of being basically unflashable. And I do not now how to create/compile a new md5-file. With what application should I do this? Winrar and 7zip only allow viewing and extraction.
Click to expand...
Click to collapse
JFI, I have an i8160P like you an had flashed it to JB. Tried to downgrade with the russian firmware and the same faults. Can't flash any other firmware afterwards. With Odin 3.07 I was able to flash an i8160 Firmware but now I've no baseband (Phone: unknown) and no IMEI. Unfortunately i haven't saved the /efs.
Now I'm looking around for a way to get baseband back.
Sorry for my english. It's 30 years ago i had it at school.
Related
First, I'm an idiot,,,got new to android,,had no idea about flashing,, so I just randomly picked a Rom, and turned out its a GT-N7100 ROM, now my phone has no signal at all,,, anyone know how to flash back ? or I have to wait a att ROM come out?
BTW, Im with Rogers.
Thanks:laugh:
your gonna have to wait till either someone makes a odin back with a stock rom or makes a stock rom you can flash via recovery.
EDIT: did you make a backup?
this reminds me of the following youtube video:
http://www.youtube.com/watch?v=wwleOote5M0
Can you give a link to the firmware you flashed? It'd be useful to know if it contained a modem and/or kernel (or not.)
If it contained a modem, you'll need another modem. If it contained a kernel, you'll need another kernel. We have those. Regardless, you'll need to talk someone into getting you a system image (someone that has the same phone as you and has already rooted.)
Also, do you have CWM recovery installed? Is the existing firmware (as trashed as it might be) rooted? Can you use adb?
im an idiot
garyd9 said:
this reminds me of the following youtube video:
http://www.youtube.com/watch?v=wwleOote5M0
Can you give a link to the firmware you flashed? It'd be useful to know if it contained a modem and/or kernel (or not.)
If it contained a modem, you'll need another modem. If it contained a kernel, you'll need another kernel. We have those. Regardless, you'll need to talk someone into getting you a system image (someone that has the same phone as you and has already rooted.)
Also, do you have CWM recovery installed? Is the existing firmware (as trashed as it might be) rooted? Can you use adb?
Click to expand...
Click to collapse
nope,, I didnt back up anything,,
heres the ROM link I used.
http://forum.xda-developers.com/showthread.php?t=1925402
...
I just opened the file you linked to.. it includes a modem, kernel, etc.
I know you won't be happy with this, but until an ODIN image shows up, you're kind of out of luck. If someone you know has the same phone, you could ask them to do a backup to an external memory card, and then you restore that backup to your device. Assuming the modem wasn't flashed when you installed, that would get you back into business. If a modem was flashed, you'll need to get someone to extract a modem (and I'm not sure how to go about doing that.)
garyd9 said:
Please answer ALL of these questions. I can't help you if you don't answer them all...
Does your phone work now, with the exception of connecting to the mobile network?
Are you familiar with adb? If so, are you able to get a shell via adb?
When you plug your phone into your computer, are you able to copy files to/from the phone?
Which custom recovery do you have installed? CWM recovery or TWRP?
Is your phone rooted? (it probably is with a custom firmware - assuming the phone works at all.)
Click to expand...
Click to collapse
sorry buddy,,,
right now, the phone has no signal, asking for a sim card, which Ive already inserted it.
noepe, I donno what adb is, I tried google it, but I think its too complicate for me.
I'm able to copy files into or from my phone( SD card)
i rooted my phone through this:
http://forum.xda-developers.com/showthread.php?t=1923956
donno if i successed,,, but it has a superSU on my screen after I done it,(guess it count as rooted?) and I may used the TWRP
thank you for your help....
now Im back to my old Iphone 4
I updated that post. Basically, I can't think of anything you can do right now.. until an ODIN dump is available - or if someone gets you a backup you can restore. However, a backup won't flash the proper modem (and it appears you also overwrote the modem.)
garyd9 said:
I updated that post. Basically, I can't think of anything you can do right now.. until an ODIN dump is available - or if someone gets you a backup you can restore. However, a backup won't flash the proper modem (and it appears you also overwrote the modem.)
Click to expand...
Click to collapse
so, if theres a ATT ROM avaiable in the future,,,I can use my phone again by flashing the ATT ROM?
callmejoe1 said:
so, if theres a ATT ROM avaiable in the future,,,I can use my phone again by flashing the ATT ROM?
Click to expand...
Click to collapse
Was the phone originally from AT&T or Rogers?
callmejoe1 said:
First, I'm an idiot,,,got new to android,,had no idea about flashing,, so I just randomly picked a Rom, and turned out its a GT-N7100 ROM, now my phone has no signal at all,,, anyone know how to flash back ? or I have to wait a att ROM come out?
BTW, Im with Rogers.
Thanks:laugh:
Click to expand...
Click to collapse
Welcome to club i've been here for 6 days... it's a crappy feeling especially when its your work phone :[
garyd9 said:
Was the phone originally from AT&T or Rogers?
Click to expand...
Click to collapse
with rogers,but I heard ppl say ATT AND ROGERS‘s ROM can be equivalent , are they ?
callmejoe1 said:
with rogers,but I heard ppl say ATT AND ROGERS‘s ROM can be equivalent , are they ?
Click to expand...
Click to collapse
Perhaps - perhaps not. Until one actually flashes from the other, we don't know. (Many will tell you that they've done it with a different phone model - my answer to that is simply that it was a different phone model. Until its tried with THIS one, we can only guess.)
I think the biggest stumbling block for you right now is the modem. We have a stock kernel and recovery. A "near" stock system partition image can also be made from another device with a simple command. I have to be honest, though, that I have no clue how to extract the modem from these LTE phones.
A recovery (and kernel) can easily be flashed with ODIN (or with dd from a rooted shell.) Same for the system partition (which is, basically, the OS.) Getting a system image might be annoying, as you'd need to find someone with a roger's phone to make it for you, upload it, etc.
The modem, however... I'm not sure how to go about getting that for you. I've never had to create a modem image...
If/when a ODIN package appears, you can use a program that will, basically, reflash your entire phone to stock. Modem, kernel, recovery, bootloader, etc. Everything. Normally, users wouldn't see those ODIN packages, but there are a couple of websites that have access to some samsung servers where they a put. Once they are put there, we can get it...
Take care
Gary
Mobiletechvideos. Have them Jtag it for you.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Just me happy you don't have the note 1 if you would have made that same mistake you could have bricked your phone
envision said:
Just me happy you don't have the note 1 if you would have made that same mistake you could have bricked your phone
Click to expand...
Click to collapse
Yup your very lucky
I firmly believe you cna just flash your modem and kernel on top and it will be fine ,.
im hella busy this weekend but im sure we can get you fix withou a single $$ injected on your part
DAGr8 said:
I firmly believe you cna just flash your modem and kernel on top and it will be fine ,.
im hella busy this weekend but im sure we can get you fix withou a single $$ injected on your part
Click to expand...
Click to collapse
Looking forward to this remedy as this is the reason I am jumping from att Galaxy S 3 to the note2. Want my international dev community back!
Unfortunately so far down here in Southern Florida Miami beach there is no white Note 2 anywhere.
For those that have the ATT version of the Note 2, if you've mistakenly flashed the ROM, I highly suggest visiting your nearest AT&T Device Support Center. Since I've previously worked in those centers, they have a propietary Samsung flashing tool that allows them to flash to the stock ROM, even if it's rooted. Granted they'll be able to tell if you've rooted it or not (which may or may not void the warranty, depending on who you talk to), as long as the phone can turn on and go to firmware recovery mode, the flashing works almost 100% of the time and it's a free service.
However, as I got my Note 2 yesterday, I've contacted my nearest DSC and they said that they don't have the ability to flash the Note 2 yet and they may have that ability to do so in the next few weeks or possibly by the end of the year (if you can wait that long). Being that the associates are just corporate drones, if they can't fix it, they'll more than likely replace your phone under warranty (which I don't suggest since the replacements are refurbished, and besides you should be within the 14 day return period for a new phone).
Sorry if it doesn't help the ones who have the Rogers versions.
DAGr8 said:
I firmly believe you cna just flash your modem and kernel on top and it will be fine ,.
im hella busy this weekend but im sure we can get you fix withou a single $$ injected on your part
Click to expand...
Click to collapse
would you mind if you can post the link for the modem and kernel please?
thank you
DAGr8 said:
I firmly believe you cna just flash your modem and kernel on top and it will be fine ,.
im hella busy this weekend but im sure we can get you fix withou a single $$ injected on your part
Click to expand...
Click to collapse
Im having the same problem. I hope you can roll out a fix!
hi everyone.. i just bought Samsung Galaxy Note II 4G on first december, from Optus Australia..
and last night i try to root, and flashing Omega v7.3 Rom from N7100, it is work well but the IMEI and Signal is gone, and also the S-pen is not working..
and i try use N7105 custom rom http://forum.xda-developers.com/showthread.php?t=1985200
and also my signal is still not detected, but my S-Pen is working back..
somebody please help me...
how to fix my signal problem
benatis said:
and flashing Omega v7.3 Rom from N7100
Click to expand...
Click to collapse
Why in first case did you flash a ROm which isn't intended to be for your device?
Well you killed your EFS partition (bricked)
I hope you mad a EFS backup BEFORE you flashed. So you can restore it and all will be fine.
You could try the Stock Firmware via Mobile Odin if it fixes your EFS problem. No Guarantee here, sometimes it dsoes work and sometimes not.
Good luck to you
Higgins12 said:
Why in first case did you flash a ROm which isn't intended to be for your device?
Well you killed your EFS partition (bricked)
I hope you mad a EFS backup BEFORE you flashed. So you can restore it and all will be fine.
You could try the Stock Firmware via Mobile Odin if it fixes your EFS problem. No Guarantee here, sometimes it dsoes work and sometimes not.
Good luck to you
Click to expand...
Click to collapse
hmm.. i never used Samsung device before.. this is my first Samsung device i have ever..
different with my old HTC devices..
i will try ODIN now... use Stock ROM....
-----
and also, i have tried to wipe data from CWM, why my Note2 device still can boot?
i mean, like not wiped the data completely
benatis said:
hmm.. i never used Samsung deviced before.. this is my first Samsung device i have ever..
different with my HTC devices
Click to expand...
Click to collapse
I believe the reason you are experiencing this issue is because this new firmware you flashed doesn't contain a custom radio and the n7100 firmware did. You will need to find a n7105 radio, flash that through CWM or TWRP and you should be back in business mate.
chrisaw said:
I believe the reason you are experiencing this issue is because this new firmware you flashed doesn't contain a custom radio and the n7100 firmware did. You will need to find a n7105 radio, flash that through CWM or TWRP and you should be back in business mate.
Click to expand...
Click to collapse
where i can download n7105 radio ???
and how to flash the radio?
where i can download the stock Radio, Firmware, and rom of N7105 ???
i Have tried Odin, and flash Stock rom... but i dont know how to wipe data and chache from odin..
i just flash it..
and now, my Signal is appear... lol...
thanks for everyone...
Would be glad to help you but you seem to have skipped the first rule : read, read, read before you do anything else. You even admitted that this is your first Samsung device, so why did u assume that everything should have been htc like ?
Anyhow, you can try to flash the newest 4.1.2 update for the 7105, even though I fear that your problem is your efs folder, and since this is unique for each device, no flashing any rom will put it back in place.
http://forum.xda-developers.com/showthread.php?t=2027586
Good luck,
P_
pakalrtb said:
Would be glad to help you but you seem to have skipped the first rule : read, read, read before you do anything else. You even admitted that this is your first Samsung device, so why did u assume that everything should have been htc like ?
Anyhow, you can try to flash the newest 4.1.2 update for the 7105, even though I fear that your problem is your efs folder, and since this is unique for each device, no flashing any rom will put it back in place.
http://forum.xda-developers.com/showthread.php?t=2027586
Good luck,
P_
Click to expand...
Click to collapse
yah.. i have flash that ROM just now..
but, why my signal is verry in poor level? only showing 2 bar?
im sorry, im not experienced with samsung devices
Since you said that the phone is from Australia and Optus you may want to flash its original firmware back in place :
http://www.sammobile.com/firmware/?page=3&model=GT-N7105&pcode=OPS&os=1&type=1#firmware
If you do not use the phone in Australia you may want to find a firmware (if available) for your device/geographical region.
P_
benatis said:
i Have tried Odin, and flash Stock rom... but i dont know how to wipe data and chache from odin..
i just flash it..
and now, my Signal is appear... lol...
thanks for everyone...
Click to expand...
Click to collapse
I am facing the same problem you had before, however when i try to Odin the stock 4.1.1 firmware back to the phone, it stops at the Samsung logo when restarting. I have to force back to recovery mode to flash the omega back to have it start again. Can you please tell me the steps you did on putting back to stock firmware? thanks
If you haven't yet reflashed the EFS partition (don't do that, ever ! unless you have a good reundant set of backups), you actually don't need to reflash to stock firmware at all (and I doubt that it'd do any good anyways. It just puts back a generic EFS with the files set at default values, but certainly can't put back the data you had in your own device's EFS, this is unique to each phone).
Just head on over to the Galaxy S2 forums and look for a thread called "Restore your IMEI in 9 steps" (something like that. There's actually quite a number of threads describing the same procedure, you can find them by searching "samsung restore imei" in all forums, works just as well).
I had the same problem the other day (and no backup of course, silly and impatient me... ), it worked like a charm..
It's topics like this that i know that People Will get Hurt on. Come on, read and study before doing anything on a smartphone. There's a reason why android doesn't come with administrator rights from factory.
Sent from my GT-N7100 using Tapatalk 2
Hello, everyone. First I want to say a big thank you to all XDA Developers and forum mod's for all hard work they do for us users.
I have purchased trough craiglist cell phone and I have tried to delete all things that previous owner had on the phone since he did not delete his files and the rest of his stuff. I did flash phone with some stock rom's and some rooted rom's. I have Baseband Version, H/W unknown and also IMEI MEID is unknown. Before I decided posting here, I have read here on xda and searched everywhere to fix it but I didn't have any luck.
I have tried downloading almost all firmware and tried different modems, kernels, bootloaders, repartioning and it does not fix my phone.
I would really apreciate if anyone can help me with this. Is there any way to get from somebody that have same phone like partition or files?
Thank you very much!
Elvis
torcida1950usa said:
Hello, everyone. First I want to say a big thank you to all XDA Developers and forum mod's for all hard work they do for us users.
I have purchased trough craiglist cell phone and I have tried to delete all things that previous owner had on the phone since he did not delete his files and the rest of his stuff. I did flash phone with some stock rom's and some rooted rom's. I have Baseband Version, H/W unknown and also IMEI MEID is unknown. Before I decided posting here, I have read here on xda and searched everywhere to fix it but I didn't have any luck.
I have tried downloading almost all firmware and tried different modems, kernels, bootloaders, repartioning and it does not fix my phone.
I would really apreciate if anyone can help me with this. Is there any way to get from somebody that have same phone like partition or files?
Thank you very much!
Elvis
Click to expand...
Click to collapse
Are you trying to wipe the phone completely?
MHousos said:
Are you trying to wipe the phone completely?
Click to expand...
Click to collapse
I have tried to flash and firmware that was posted for sph-d710 was actualy for sgh-i900 but I didn't know till I have flashed and booted.
That's when my h/w, baseband, imei was changed to unknown.
Phone does work but modem doesn't, I can use WIFI.
torcida1950usa said:
I have tried to flash and firmware that was posted for sph-d710 was actualy for sgh-i900 but I didn't know till I have flashed and booted.
That's when my h/w, baseband, imei was changed to unknown.
Phone does work but modem doesn't, I can use WIFI.
Click to expand...
Click to collapse
You might want to try an odin one click and it'll reset all of it back to normal and will put you on the latest Jellybean leak. Here's the one to use if you want Root http://www.rwilco12.com/downloads.p...-D710)/Stock ROMs/JB/GA10/Full Restore/Rooted and here's the one if you don't want Root http://www.rwilco12.com/downloads.p...710)/Stock ROMs/JB/GA10/Full Restore/Unrooted
If you flashed an international (gt-i9100) rom you're looking at jTag or replacing the phone cuz you hosed your bootloader and the partitions so the PC will never recognize it to Odin it back to stock. If the rom is rooted you *MAY* be able to use mobile odin to flash everything but the modem, but it's highly doubtful that will fix your forked up bootloader. And I've never seen an i9100 rom labeled as a d710 rom I think you just didn't read thoroughly enough.
I like to break stuff!
Thank you, MHousos. I'll give a try with SPH-D710_GA10_818252_Rooted_Restore. I have to mention that all other firmware I have tried flashing with Odin and Heimdall they both can flash phone but when they slow down when flashing modem.bin. They don't show no errors or that flashing have pass. I have been waiting for long time to see if the phone will get flashed or not but later I have to flash kernel so I can use phone with WIFI but baseband, h/w, imei is unknown.
-EViL-KoNCEPTz- said:
If you flashed an international (gt-i9100) rom you're looking at jTag or replacing the phone cuz you hosed your bootloader and the partitions so the PC will never recognize it to Odin it back to stock. If the rom is rooted you *MAY* be able to use mobile odin to flash everything but the modem, but it's highly doubtful that will fix your forked up bootloader. And I've never seen an i9100 rom labeled as a d710 rom I think you just didn't read thoroughly enough.
I like to break stuff!
Click to expand...
Click to collapse
Thank you Evil-K. It was sph-d710. but when I flashed phone it was i9 and I found one that asks for password to extract it.
torcida1950usa said:
Thank you Evil-K. It was sph-d710. but when I flashed phone it was i9 and I found one that asks for password to extract it.
Click to expand...
Click to collapse
+100 what -EViL-KoNCEPTz- said.
IF you flashed an international ROM you are mostlikely SOL.
Do some reading.
Good luck.
leaderbuilder said:
+100 what -EViL-KoNCEPTz- said.
IF you flashed an international ROM you are mostlikely SOL.
Do some reading.
Good luck.
Click to expand...
Click to collapse
I have tried I think almost all stocks, rooted, kernels, modems and other tools.
My phone is not dead, I can flash and use phone with WIFI.
When I try to flash any one-click firmware with odin or heimdall they stop like at end when flashing modem.bin
I have to disconnect usb cable and power off phone than put it in D/M and flash kernel but modem will not work
as h/w ime baseband is unknown.
Please can anyone help me out I would really apreciate.
In SPH-D710 .PIT it shows 13 or 14 file images?
If I had all files to flash would that help or not?
If someone could help me to get all files so I can try
I'm not asking to help me for free.
Thank you guys.
torcida1950usa said:
I have tried I think almost all stocks, rooted, kernels, modems and other tools.
My phone is not dead, I can flash and use phone with WIFI.
When I try to flash any one-click firmware with odin or heimdall they stop like at end when flashing modem.bin
I have to disconnect usb cable and power off phone than put it in D/M and flash kernel but modem will not work
as h/w ime baseband is unknown.
Please can anyone help me out I would really apreciate.
In SPH-D710 .PIT it shows 13 or 14 file images?
If I had all files to flash would that help or not?
If someone could help me to get all files so I can try
I'm not asking to help me for free.
Thank you guys.
Click to expand...
Click to collapse
Use a Full Restore One Click, as it actually is preset to re-partition. All One Clicks are built with the pit file as the pit is used for mapping.
I would recommend using PC Odin manually to flash the three tar files separately. Kernel, modem and Rom.
I can tell you this - If you're attempts are always failing at a certain location, then it's probably time for you to follow this link, providing that you can actually flash.. http://forum.xda-developers.com/showthread.php?t=1865102
And maybe even the possibility of failing internal memory. Last two threads I remember that started like yours ended with a BLOD,
Good luck, I hope that isn't the case for you.
Hey all,
So I've checked as much as I could to try and help myself before posting, so hoping some kinds souls can help out with my issue.
Got a samsung galaxy s3 SGH-T999V on Wind Mobile (Canada), android 4.3. My aim is to root the phone, then play with some roms later on, but at least get the rooting part done. I started with this hxxp://theunlockr.com/2012/07/23/how-to-root-and-install-clockworkmod-recovery-on-the-samsung-galaxy-s3-sgh-t999v-canadian-version guide, but the CMW didn't get installed when I went into recovery mode, just had the stock phone recovery options.
So then, went on to try pretty much the exact same procedure but with the root66_GLW_T999VVLALH2.7z..but Odin gave me the failed sbl2 error or something like that. Now i didn't have anything to backup so I didn't really care wiping the phone to factory default so I did so ( as well as the cache partition using the default android recovery menu.) But even still, no luck. When I tried again, it (Odin that is) just seemed to hang at the phase that stated "get PIT" or something like that (apologies I'm pulling this all from memory).. Had no real choice but to interrupt it restart, try again, back to the sbl2 error again. Doing this from a Win7x64 Ultimate OS (if that's relevant). I HATE the phone the way it is, I cannot stand the bloatware and I have a lot in mind to have fun with if I can ever get this bloody thing to root.
I think that's about all I can mention atm, did the usual stuff like try different usb ports, the phones USB cable 'seems' to be ok and working, I'm just beyond frustrated and finally at the part where I need to ask for help. Any and all help is deeply appreciated. Cheers
i also want help rooting my T999v version 4.1.2 cant seem to find a tutorial for rooting of version 4.1.2
ksec said:
Hey all,
So I've checked as much as I could to try and help myself before posting, so hoping some kinds souls can help out with my issue.
Got a samsung galaxy s3 SGH-T999V on Wind Mobile (Canada), android 4.3. My aim is to root the phone, then play with some roms later on, but at least get the rooting part done. I started with this hxxp://theunlockr.com/2012/07/23/how-to-root-and-install-clockworkmod-recovery-on-the-samsung-galaxy-s3-sgh-t999v-canadian-version guide, but the CMW didn't get installed when I went into recovery mode, just had the stock phone recovery options.
So then, went on to try pretty much the exact same procedure but with the root66_GLW_T999VVLALH2.7z..but Odin gave me the failed sbl2 error or something like that. Now i didn't have anything to backup so I didn't really care wiping the phone to factory default so I did so ( as well as the cache partition using the default android recovery menu.) But even still, no luck. When I tried again, it (Odin that is) just seemed to hang at the phase that stated "get PIT" or something like that (apologies I'm pulling this all from memory).. Had no real choice but to interrupt it restart, try again, back to the sbl2 error again. Doing this from a Win7x64 Ultimate OS (if that's relevant). I HATE the phone the way it is, I cannot stand the bloatware and I have a lot in mind to have fun with if I can ever get this bloody thing to root.
I think that's about all I can mention atm, did the usual stuff like try different usb ports, the phones USB cable 'seems' to be ok and working, I'm just beyond frustrated and finally at the part where I need to ask for help. Any and all help is deeply appreciated. Cheers
Click to expand...
Click to collapse
If you're on 4.3 stock you'll have to deal with this new thing they added called "Knox". Also you cannot downgrade to older versions of official firmware if you have updated to 4.3 stock. Root66 won't work for you unless there's a version of root66 firmware that is 4.3 (which there isn't). Here's a thread that should solve this problem for you: http://forum.xda-developers.com/showthread.php?t=2563955
dorian2kx said:
i also want help rooting my T999v version 4.1.2 cant seem to find a tutorial for rooting of version 4.1.2
Click to expand...
Click to collapse
Since you haven't updated to 4.3 yet, you don't have to deal with Knox, so use the root66 method here: http://forum.xda-developers.com/showthread.php?t=1949687
adslee said:
If you're on 4.3 stock you'll have to deal with this new thing they added called "Knox". Also you cannot downgrade to older versions of official firmware if you have updated to 4.3 stock. Root66 won't work for you unless there's a version of root66 firmware that is 4.3 (which there isn't). Here's a thread that should solve this problem for you: http://forum.xda-developers.com/showthread.php?t=2563955
Since you haven't updated to 4.3 yet, you don't have to deal with Knox, so use the root66 method here: http://forum.xda-developers.com/showthread.php?t=1949687
Click to expand...
Click to collapse
Hey adslee, thnks for the reply. I noticed the Knox app. Well then, that explains somethings. It did give me the impression that something was inhibiting the process. I'll check out the link you provided and let you know. Cheers
Thanks bro but can u please tell me how can i know what type my phone is, i mean is it a wind, videotron etc? Or it doesn't matter? Are they the same
dorian2kx said:
Thanks bro but can u please tell me how can i know what type my phone is, i mean is it a wind, videotron etc? Or it doesn't matter? Are they the same
Click to expand...
Click to collapse
Look Under the Battery on thw White Sticker. What do you have in there for a Model Name?
i have there a SGH-T999V
dorian2kx said:
i have there a SGH-T999V
Click to expand...
Click to collapse
Well then that's the Device you have. Anything said in Settings > Model is suspect. If I modify ro.device in Build.prop then My Galaxy S3 will appear instantly as S4 or Nexus 5. That does not mean it is one.
You always go by what's under the Battery and not by Settings > Model.
First off I NEVER have had rom issues before this, it all started with a failed encryption attempt that soft bricked my phone. instead of re posting what i wrote here is a link to the 2 pg thread in which i received help and thus this is where i am at.
http://forum.xda-developers.com/showthread.php?t=2701706
OK now ever since then i have never been able to update to a new rom. I believe it let me do it once and i believe i am using an older version of S3Rx.
I believe it may be due to how I updated to 4.3 I would like to get 4.4 as i believe kit kat (tell me if im wrong) will probably be the last android os the S3 will support so i basically want to get the most out of it as i can and also be able to try other roms in general like i used to. Because i currently do not have a sd card I have yet to try anything drastic as i normally use my sd card for backups and rom installs because if something happens to the phone i have the sd card backup.
So in all What should I DO, I have fears of using Odin as the one time it failed on me i bricked a phone and I cant really afford to hard brick this one like i did the other. Although the only thing I can think of being a dumb leach user and non dev. Would be to use odin with the most recent root66 then go from there? Although again lol all i can think of is the above.
Thanks for reading and i hope like the last time I will recieve help to bring back the life to this device. TIA!!
Can you give a little more info on why you can't flash, like an error message or something?
serio22 said:
Can you give a little more info on why you can't flash, like an error message or something?
Click to expand...
Click to collapse
for some reason using twrp and cwm they fail with twrp it normally fails instantly and with cwm it will fail sometime during the install.
I need to put a rom on my phone and ill give exact error. I havce been trying to use the likewise port from att http://forum.xda-developers.com/galaxy-s3-t-mobile/development/rom-likewise-s5-4-1-tw-4-4-2-ne4-t2879647 I normally use an sd card as i have the 12gb model and some roms are large but i should still be able to succeed (we will see from the error message)
thanks for replying
Alright. Also make sure you are using the latest recoveries
serio22 said:
Alright. Also make sure you are using the latest recoveries
Click to expand...
Click to collapse
HRM i guess im ok i just installed the latest S3Rx as i wanted to see what made it stop so i chose this rom (because i needed to update anyway) and it had aroma so I thought perfect ill know when it fails but it worked out ive downloaded and tried to install likewise several time at first i thought i got a bad download but ive tried again and for some reason. I have yet to try a 4.4 (i wanted to try likewise so thats why i chose it) so without trying other roms my issue has something to do with going to 4.4 from 4.3 IDK though as i have not tried other roms but no one else seams to have this issue with this rom port?
Any 4.4 rom suggestion to try to find out what the issue is?
currently installed base-band modem should have no impact on rom installation only the fact i wont get signal right?
I just cant think of any reason why i am having the issue?? any ideas anything i should check to make sure its right on my mobile? BTW thanks for coming back to help as this is possibly a stupidity problem which is hard to help how do you help stupid lol?
Try S3rx 4.4.2 or do you mean aosp/cm?.. And correct, baseband/modem won't matter on ROM installation.. I'm sure it's not stupidity, believe me we all get issues we cannot understand at times and the next time you try, problem is gone lol
serio22 said:
Try S3rx 4.4.2 or do you mean aosp/cm?.. And correct, baseband/modem won't matter on ROM installation.. I'm sure it's not stupidity, believe me we all get issues we cannot understand at times and the next time you try, problem is gone lol
Click to expand...
Click to collapse
i personally prefer touchwiz so no aosp or cm and the latest version of s3Rx i though is what i just installed but its only 4.3 not 4.4
http://forum.xda-developers.com/showthread.php?t=2326763
installing that works but i still cant get to 4.4 im going to search for one that has aroma maybe it will work do you have any suggestions on a good touchwiz based rom on the latest version of android?
To me Likewise looked the best but trying to get that rom working is what prompted this OP.
I still have yet to try again after this recent rom update as I havent had the time and the battery level is not high enough yet to start as i will need to create a new backup and delete my old ones as i have the 12 gb model and currently no sd card.
I will post back when that has been done to show my results. In the mean time ill be searching for another possibly suitable rom like i already said something with aroma and if you have a preference ill try that first.
S3rx 4.4.2 http://forum.xda-developers.com/showthread.php?t=2848080 try that and see if it works
Sent from my SGH-T999 using Tapatalk
serio22 said:
S3rx 4.4.2 http://forum.xda-developers.com/showthread.php?t=2848080 try that and see if it works
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
it wont change my modem? and it will be OK I NEVER have used a rom other than roms made specially for t-mobile i was always under the impression that's a bad idea? I know att and t-mobile are sometimes compatible though but Ive still always been weary so before i do it you want me to use an att rom on my t-mobile?
Anythi8ng special i should know before i do it (besides thew obvious like make a backup and follow op directions) because im not on att i dont want another soft brick (cant afford to have that happen right now either) and a HARD brick would totally mess me up. (i just paid this off lol)
serio22 said:
S3rx 4.4.2 http://forum.xda-developers.com/showthread.php?t=2848080 try that and see if it works
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
it wont change my modem? and it will be OK I NEVER have used a rom other than roms made specially for t-mobile i was always under the impression that's a bad idea? I know att and t-mobile are sometimes compatible though but Ive still always been weary so before i do it you want me to use an att rom on my t-mobile?
Anythi8ng special i should know before i do it (besides thew obvious like make a backup and follow op directions) because im not on att i dont want another soft brick (cant afford to have that happen right now either) and a HARD brick would totally mess me up. (i just paid this off lol)
EDIT:
AT&T I747 users should update bootloaders and modem to NE4 http://forum.xda-developers.com/gala...pdate-t2808654 I747M and T999 users need to be on 4.3 firmware or ROM will not boot.
Click to expand...
Click to collapse
after reading this it makes me for comfortable so ill try it out Im currently on S3Rx 4.3 so wish me luck I sure hope it works!!
Edit: well I tried it it installed fine but the screen would not display i could feel the phone vibrate as to start up although like i said no boot screen no Samsung loading screen basically yeah I'm having problems with 4.4.X
You don't need to change anything and it won't change your modem, you just need to be on 4.3 firmware
serio22 said:
You don't need to change anything and it won't change your modem, you just need to be on 4.3 firmware
Click to expand...
Click to collapse
ill try again but the rom you said to try installed fine no problems but after restart no display????? it vibrated so IDK if it even booted. I am really confused I have never had problems like this. Especially with this phone as it has been easy from the start not the case with other devices i have used.
So ill try again maybe a reboot will get it working IDK but i guess ill try it again cross your fingers
BeatnikBandit said:
ill try again but the rom you said to try installed fine no problems but after restart no display????? it vibrated so IDK if it even booted. I am really confused I have never had problems like this. Especially with this phone as it has been easy from the start not the case with other devices i have used.
So ill try again maybe a reboot will get it working IDK but i guess ill try it again cross your fingers
Click to expand...
Click to collapse
That means you are not on 4.3 firmware, so update your firmware and try again
serio22 said:
That means you are not on 4.3 firmware, so update your firmware and try again
Click to expand...
Click to collapse
my phone says its 4.3 but like you said it must be an issue how do i update my firmware again?
BeatnikBandit said:
my phone says its 4.3 but like you said it must be an issue how do i update my firmware again?
Click to expand...
Click to collapse
You could be on a 4.3 ROM, but have a 4.1.x bootloader.. Download latest 4.3 firmware for your device and flash it with Odin
So yes i must be on 4.1.2 as that was the last time i flashed with odin so i believe you help3ed me with my main isssue now this is something i would like to be sure of:
Can i simply flash the following posted on the s3rx page or will i have to use odin i prefer not to as well i don't know much about it and it scares me as idk how to if possible backup in case of error as the only unfixed problem i have ever had was a while rooting a galaxy s 4g (the one that came with inception) and i walked away and the cord was unplugged and there was an error that it still has about firmware upgrade failure connect to kies and neither kies nor odin will connect to it so its currently in the same situation. So i am fearful of using odin unless it must be done.
Complete 4.3 T999, T999L and T999V bootloader and modem packages.
After flashing DO NOT try to install any older bootloaders or use any other odin.tar other then the latest 4.3 or you will brick your phone.
T999 ONLY, T999 ONLY, T999 Only
T999 ONLY, T999 ONLY, T999 Only
Complete MJC bootloader and modem
http://www.mediafire.com/download/5c..._modem_4.3.zip
Complete NC2 bootloader and modem *Added 3-22-14* Thanks to @Synthetic.Nightmare
http://www.mediafire.com/download/fc..._modem_4.3.zip
Click to expand...
Click to collapse
Would this be enough (would probably use NC2) or will i be better of using the latest root66 with odin? and if so can you give me some tips on odin usage as i would get the latest odin and the latest root66 rom and flash it hoping it works I would try to learn more also but yeah.
It's better to flash the full firmware with Odin imo, but it should be fine. And yes, use nc2
So i think the best cleanest way is to use odin although i have a few questions
First the latest version of odin should work right so 3.09 or 3.10?
Can a backup before this? is there a way to do it?
Lastly the best rom to flash is root 66 NC2 fot t999
Then i will be on a 4.3 bootloader and will be able to use 4.3+ roms?
I have the drivers the latest odin and the root66 image can you direct me on how to do it as a refresher?
I appreciate all your help!!
Please go to Android development an look at [baseband] an just go to first page should help with everything
I believe the root66 thread has instructions