[Q] 4.2.2 google screen/ stuck on custom rom flash - Samsung Galaxy Nexus

Search did not give any results i guess. Finally got the nexus up and running again / was on CM10 and had neglected to wipe data when flashing the 4.2.2 factory image. It was pretty weird, I think. The phone had sat on the 'X' screen time after time, minutes not counted.. I had at first vol up/ vol down / power and had gotten a red exclamation for some reason. Eventually got into fastboot, I had used the toolkit by mskip / reflashed the 4.2.2 image , made sure to clear data and all works fine. When flashing a custom rom it sticks on the google unlocked screen. Why? What is the problem? How does this fix itself or going about it to get it fixed? ....... Again, if this is a stupid question and you have easily found the answer by all means pass along the right keyword. If this is not a stupid question, you don't think, and are cool about helping me out, by all means, please do so.
Edit . I had flashed stock then custom rom on another device with only the usual, i guess, load time. The best advice search forums gave me was , just wait'.

http://forum.xda-developers.com/showthread.php?p=38127432
Flashed cm-10.1-20130217-NIGHTLY and got stuck on the "Google" logo on reboot. Booted to recovery and installed the Feb 16 build and all is good. Hopefully the next nightly works well.
From the CM thread.

Hello.
Try to flash the 2013.02.17 nightly AND some 4.2.2 kernel.
I tried with LeanKernel 6.0exp1 and it works
There are reports with working flashed 2013.02.17 with Franco's Kernel latest too.

vfmmeo said:
hello.
Try to flash the 2013.02.17 nightly and some 4.2.2 kernel.
I tried with leankernel 6.0exp1 and it works
there are reports with working flashed 2013.02.17 with franco's kernel latest too.
Click to expand...
Click to collapse
perfect work.

Related

[Q] Random reboots and bootloop even after fullwipe

Hi there!
I installed
http://forum.xda-developers.com/showthread.php?t=1912187
with basbeand 77 instead of the recommended ones, and it appeared to work just fine for two days.
Today, I installed the LBE Guard, and so my Desire was stuck in bootloop, which I could get out of after a fullwipe and a new install.
So, then, I installed the LBE privace Master (v4.3.2738),
http://forum.xda-developers.com/showthread.php?t=1422479
because I read it was okay for JB. While configuring it, my phone crashed, and I was again stuck in a bootloop. I tried to make a fullwipe again, and a new install, but I have still these random (but appearing soon after booting) crashings and then a bootloop. It even appears when I use the Aroma Installer, but not in the CWM.
So my question is - what went wrong and more importantly, how do I get my phone to work again?
Thanks for replying.
The part with the baseband is wrong - that was my other phone.
I am quite the noob-cookie, I also have the problem with random reboots and freezes. I have been messing around with the new Nikez 4.2 Jellybean Rom, i thought that could be the reason why. But now I am also experiencing it with the old Nikez 4.1 Rom that used to be very stable for me. Anyone know a good solution? I have done several full wipes..
Cheers!

[Q] What is wrong with my Gnex?

Hey the Problem is the following:
3-5 random reboots every day
restarts during every phonecall after 1-3 Minutes
freezes when in standby, cant turn back on -> need to take battery out
often slow, especially when switching apps. or when typing
I have tried stock 4.3, CM10.2 recently and before that CM10.1 for a while.
I already send it in but they only said my battery is broken.
Is it possible that all my problems come from this?
I rather think my flash memory is broken? What you think?
JonnyZaggi said:
Hey the Problem is the following:
3-5 random reboots every day
restarts during every phonecall after 1-3 Minutes
freezes when in standby, cant turn back on -> need to take battery out
often slow, especially when switching apps. or when typing
I have tried stock 4.3, CM10.2 recently and before that CM10.1 for a while.
I already send it in but they only said my battery is broken.
Is it possible that all my problems come from this?
I rather think my flash memory is broken? What you think?
Click to expand...
Click to collapse
Since yesterday I am facing the same problems you are describing. At first I thought it was a bad flash or something like that. Clean installed various 4.3 costum roms and it's always the same.
Right now I will look deeper into it since the phone is unusable in that condition.
If I find a solution I will comment.
Best regards
Edit: Okay, works again flawlessly. I simply flashed an nightly from carbon-rom and the lags were gone. Hope it helps. What exactly caused the lag I don't know. For now I am staying on 4.2.2 Carbon as it is my favourite rom anyway and I will wait till there are stable 4.3 from carbon.
Are you sure it's the phone and not an app?
chrisinsocalif said:
Are you sure it's the phone and not an app?
Click to expand...
Click to collapse
Not pretty sure, but it still occured after countless factory resets, wipe cache, wipe dalvic cache and wipe system via TWRP.
Have you tried a clean install without installing apps to see if you get a reboot to eliminate an app as a possible cause?
Sent from my Nexus 7 using Tapatalk 4
chrisinsocalif said:
Have you tried a clean install without installing apps to see if you get a reboot to eliminate an app as a possible cause?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Yes I did. I only flashed for example newest PA and their PA Gapps.
So far I resolved it by "downgrading" to a 4.2.2 nightly from carbon. The lags are completly gone. I will stay and wait till carbon has stable 4.3.
why dont people try stock when they are having problems? going from 1 custom rom to the next does not prove it is the phone.
please fastboot flash the stock rom and do not restore any apps/data other than say your google acct
Zepius said:
why dont people try stock when they are having problems? going from 1 custom rom to the next does not prove it is the phone.
please fastboot flash the stock rom and do not restore any apps/data other than say your google acct
Click to expand...
Click to collapse
Already did that.
I am having the same/similar problems with my GNex too. Specifically bullets [1-3] from the original post. I am running unmodified yakjuux and have tried with just my google account with no other apps and the same problem exists.
Mine makes a noticeable "click" sound with a vibration followed by a reboot.
It usually happens during calls and after it boots the phone call log shows no record of the incoming/outgoing call that just happened. Its like a blue screen of death for android!
I have sent the phone back to Samsung's warranty service 4 separate times and each time they reported no trouble found in the completion report. They just factory reset or put an older version of jelly bean back on the phone and send it back to me with some notes of PRL updates and other nonsense to make it seem like they did something to fix it.
Does anyone have any suggestions (logs, adb, etc) how I can help prove to Samsung/service absolute that the phone is a lemon (other than trying to video tape the phone hoping it reboots - because that is the last resort)?
I already escalated to executive customer service and they refused an exchange because the completion reports show no trouble found :crying:
Thx!
well... I also have this problem.
First happened when I flash Cm10.2 nightly (don't remember which one).
Then I flash PA, or whatever... Looks like the random reboot relating to notifications? It's usually happened when whatsapp notification coming in, but not always.
But a few weeks ago I flashed stock ROM rooted (via TWRP, not fastboot).
The problems solved. No random reboots anymore. Then today I tried latest CM10.2, and it happened again... Wonder why... Looks like it's a very rare problems.
Interesting to see someone having the same problem...
Now I want to flash stock ROM via fastboot to check if it'll fix.
Btw, I can flash directly to CM 10.2 from 10.1, can't I? Or I should flash 4.3 via fastboot first?
lonestrider said:
Btw, I can flash directly to CM 10.2 from 10.1, can't I? Or I should flash 4.3 via fastboot first?
Click to expand...
Click to collapse
I believe CM offers an upgrade option somewhere in the system settings. Unless you want to wipe your phone and flash directly to 10.2 in which case I do not think you need to flash stock 4.3 first. Maybe just do a reset within 10.1 before you flash CM10.2 via whatever recovery (clockwork etc) you are using but even that may be unnecessary.
My 1 year warranty expires this month so if I can't manage to get something out of Samsung I am going to play around with flashing stock 4.3 as you suggested. I have tried converting yakjuux to yakju in the past but still saw the problem then which made me revert back to yakjuux so I could send the phone back for service).

[Q] Boot problems after two reboots

Hi there! I´ve got some issues with my gnex lately: I clean installed PA 3.99. Every went well for a couple of Days, including turning on and turning off the phone.The one strange thing happend. I installed an app, baammm, first reboot. Hm. Phone came up quickly, then baamm, second reboot. From then things went downhill... Stuck at Google-Logo. Had to pull Battery. Factory reset.
Now, everytime I boot the phone it is stuck at the Google-Logo. I have to install the ROM again and then it boots up. One time. I flashed the latest bootloader, which did not help.
Any ideas?
ive got this problem as well. probably worse.
ive got the latest nightly of carbon installed.
however once i reboot it is stuck at the google logo!!!!
im not sure if i need the latest bootloader or if im missing soemthing!
i came from a 4.2.2 rom .
astarman said:
ive got this problem as well. probably worse.
ive got the latest nightly of carbon installed.
however once i reboot it is stuck at the google logo!!!!
im not sure if i need the latest bootloader or if im missing soemthing!
i came from a 4.2.2 rom .
Click to expand...
Click to collapse
Yeah, pretty bad. At the weekend maybe I'll try to flash stock factory image. Hope that helps. But I've seen some things here at the forum. I'm slightly scared...
Sent from my Galaxy Nexus using xda app-developers app

[Q] CM11 snapshot/nightly stuck at boot... now can not even rollback to 10.2

Hi,
I had CM 10.2 running fine on my HOX. A couple of weeks ago I decided to test out CM11, since this is not my primary device, stability wasn't that big of a concern for me. The first few tries CM11 installation was a failure with some error (I can't recall) occurring when installing the zip in Recovery (if i remember correctly it had something to do with version of recovery I was using).
Anyways, I searched online, found a solution and was able to install the CM11. I have flashed the boot, erased the cache, tried wiping/factory resetting the device, in all kinds of orders (wiping/installing/flashing boot.img, flasing boot.img/installing CM11, etc). but no matter what I try my phone always stays stuck at the boot animation.
I found multiple threads on the forums with similar problems, but in most cases the OP was either missing flashing boot.img or erasing the cache helped. not so in my case.
Also, weirdly enough, now even if i try to reinstall CM 10.2 (which was working earlier), I get the same issue.
any further guidance on troubleshooting / overcoming this issue is highly appreciate
HOX International H__J15
HBOOT 1.31
CWM Touch Recovery 6.0.4.8
(btw, just tried Beanstalk ROM, same issue... I dont know what I F'd up on this phone!! )
nabeelmoeen said:
Hi,
I had CM 10.2 running fine on my HOX. A couple of weeks ago I decided to test out CM11, since this is not my primary device, stability wasn't that big of a concern for me. The first few tries CM11 installation was a failure with some error (I can't recall) occurring when installing the zip in Recovery (if i remember correctly it had something to do with version of recovery I was using).
Anyways, I searched online, found a solution and was able to install the CM11. I have flashed the boot, erased the cache, tried wiping/factory resetting the device, in all kinds of orders (wiping/installing/flashing boot.img, flasing boot.img/installing CM11, etc). but no matter what I try my phone always stays stuck at the boot animation.
I found multiple threads on the forums with similar problems, but in most cases the OP was either missing flashing boot.img or erasing the cache helped. not so in my case.
Also, weirdly enough, now even if i try to reinstall CM 10.2 (which was working earlier), I get the same issue.
any further guidance on troubleshooting / overcoming this issue is highly appreciate
HOX International H__J15
HBOOT 1.31
CWM Touch Recovery 6.0.4.8
(btw, just tried Beanstalk ROM, same issue... I dont know what I F'd up on this phone!! )
Click to expand...
Click to collapse
Your HBOOT is to low you must to upgrade ti 1.39 or 1.72 but 1.31 is tooo low and for this the CM11 don't boot
Actually I think 1.31 is the latest version which came out with jelly bean rom for the htc__15 id.
what's frustrating is that I can't even get the 10.2 version of CM working again either...which should be fine with this hboot version
nabeelmoeen said:
Actually I think 1.31 is the latest version which came out with jelly bean rom for the htc__15 id.
what's frustrating is that I can't even get the 10.2 version of CM working again either...which should be fine with this hboot version
Click to expand...
Click to collapse
try restore stock and chek for update restore nandroid and see I am not sure J15 is only 1.31
Will give it a shot tonight and report back. ...what's grinding my gears is none of the other roms including jb ones I tried are working either
i finally managed to resolve my issue. I tried changing recoveries, tried multiple ROMs and also tried to run RUU (which failed since i have a later version of the ROM vs. what's available in RUU).
finally decided to try formatting the boot, System and Cache partitions and installing CM11 again.
I had never used the 'format <partition>' feature before. Apparently this did the trick and now i am running CM11 .!!
nabeelmoeen said:
i finally managed to resolve my issue. I tried changing recoveries, tried multiple ROMs and also tried to run RUU (which failed since i have a later version of the ROM vs. what's available in RUU).
finally decided to try formatting the boot, System and Cache partitions and installing CM11 again.
I had never used the 'format <partition>' feature before. Apparently this did the trick and now i am running CM11 .!!
Click to expand...
Click to collapse
is HBOOT still the same version or did you upgrade it?
I am curious about the order in which you did things. After formatting boot, system and cache partitions, did you flash the boot image again or did you do that prior to the formatting.
Thanks

[Q] Update I9300 with 5.1.1 rom lost root

Hi,
I was on the paranoid 4.4.4 rom on my I9300, everything worked fine.
I did the last update with paranoid 5.1.1 but it didn't worked well, i have multiple error and Google service won't work anymore.
The thing is, i can't do anything at all, like restore my last backup because i lost the root access with the update.
I can't load in recovery mode, i tried the HOME+VOLUME DOWN (or up) + POWER, it won't work.
I can't fine the debug mode on this version, so i really don't know how i can at least restore my last backup to go back to the 4.4.4 version.
Any help is appreciated, thaks for your time.
Root doesn't ship with any 5.x build of paranoid android. To reset you need to boot into recovery and restore your backup or flash a different ROM.
You don't need root access for that.
It sounds like you installed an incompatible gapps....
Thanks for your reply,
I managed to boot in recovery, using a method i found on the web, i pull the battery then hold the combination keys when i put it back, and it load in recovery just fine.
I think i couldn't install the proper gapps because i was in clockwork recovery, i installed the latest TWRP, but i still can't manage to install the latest paranoid rom prpoperly.
here's what i did so far:
- wipe all/ factory reset , install Paranoid5.1.1 + Gapps 5.1 mini => paranoid load but Black screen once it's loaded with the message "Android.phone interrupted" (gross traduction) popping every 2 sec, it disapear if i put the phone on airplane mode => make me think the Google service can't connect.
- Restore my last 4.4.4 backup then => wipe cache/dalvik=>install Paranoid 5.1.1 + gapps => same as the previous problem, but this time i have my old app and i can call and receive sms.
My guess so far is a problem with the Google service who can't synchronize, the Gapps i try to use are the pa_gapps-modular-pico-5.1-20150315-signed.zip
Any guess ?
Yeah. The problem is you are using old gapps. Use banks gapps
I had trouble with a clean install of PA 5.1 + Gapps on my S3 (i9300) and similar issues to yours, not sure why but I found that if I used th full fat "Stock" 5.1 Gapps the phone was fine and has been for a day or 2 now, the pico/mini/full seemed to be problematic (at least for me). Also moved to Philz Recovery using the "Rashr" app as my old CWM kept throwing an error of status 6 on any Gapps I downloaded... Must admit though that once stable PA Lollipop runs well on the S3 and battery seems better over the past couple of days too...

Categories

Resources