Hey guys,
I was running AOKP 4.2.1 and tried to upgrade to AOKP D2TMO_JB_MR_1_build-3 using Goo Manager. I created a backup and tried flashing the new OS with GApps.
When I rebooted, I got the message that the 'Setup Wizard has crashed'. Unfortunately when I hit OK, it keeps looping and I can't get out. When I try again and reboot, I get the Google X and it is stuck there.
I can't seem to boot into TWRP to restore (tried Vol Up + Power and Vol Down + Power and Vol Up and Down + Power). Any thoughts?
It won't boot normally at all? Can you link me the rom directly that you flashed? I would assume a rom from them off their official Goo.im host would be safe, but errors can be made. If your computer recognizes your phone it can be saved.
Here is what I found http://goo.im/devs/aokp/d2tmo I wouldn't hesitate one bit to flash this, neither did 150 people, I'm curious as to what happened to your phone.
llcooljayce said:
Hey guys,
I was running AOKP 4.2.1 and tried to upgrade to AOKP D2TMO_JB_MR_1_build-3 using Goo Manager. I created a backup and tried flashing the new OS with GApps.
When I rebooted, I got the message that the 'Setup Wizard has crashed'. Unfortunately when I hit OK, it keeps looping and I can't get out. When I try again and reboot, I get the Google X and it is stuck there.
I can't seem to boot into TWRP to restore (tried Vol Up + Power and Vol Down + Power and Vol Up and Down + Power). Any thoughts?
Click to expand...
Click to collapse
You also need to hold the center home button to enter recovery.
Sent from my SGH-T999 using Tapatalk 2
Towle said:
You also need to hold the center home button to enter recovery.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Can you please provide the correct button presses to boot to TWRP?
mt3g said:
It won't boot normally at all? Can you link me the rom directly that you flashed? I would assume a rom from them off their official Goo.im host would be safe, but errors can be made. If your computer recognizes your phone it can be saved.
Here is what I found http://goo.im/devs/aokp/d2tmo I wouldn't hesitate one bit to flash this, neither did 150 people, I'm curious as to what happened to your phone.
Click to expand...
Click to collapse
I downloaded whatever was recommended from the Goo Manager ( AOKP D2TMO_JB_MR_1_build-3 )
llcooljayce said:
Can you please provide the correct button presses to boot to TWRP?
Click to expand...
Click to collapse
Make sure your phone is off
Hold Vol up + Power + home
Release all buttons when you see blue text on the top left corner of the screen.
Sent from my SGH-T999 using Tapatalk 2
Towle said:
Vol up + Power + home
Release all buttons when you see blue text on the top left corner of the screen.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
That worked. Restoring from backup ... will let you know if there is any joy. Thank you!
Let us know what happens and report the file size of the rom you downloaded... If you know how to check the MD5
mt3g said:
Let us know what happens and report the file size of the rom you downloaded... If you know how to check the MD5
Click to expand...
Click to collapse
I can certainly provide the file size but how can I check the MD5 if the file is on my phone?
llcooljayce said:
I can certainly provide the file size but how can I check the MD5 if the file is on my phone?
Click to expand...
Click to collapse
When you get back into your phone, download md5 checker from the Play Store.
Sent from my SGH-T999 using Tapatalk 2
Towle said:
When you get back into your phone, download md5 checker from the Play Store.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I got restored fine. Looks like the files have been deleted by Goo since the install worked as far as it was concerned. I think I will hold off on upgrading for a while.
BTW .. did AOKP stop development? Seems as if this new build was authored by someone else
Kasper quit devving for now as life got in the way... Jamison is starting to dabble and there is Bajee with rootbox which has Aokp inside with other options, I suggest his ROM for future nightlys and development
Sent from my SGH-T999 using xda premium
Could there be an issue if the phone, according to the build prop, is a Nexus? I've always wondered what would happen if I updated a ROM through GooManager while I'm cruising as a Nexus.
If going through goo it'll try and flash a recovery for the nexus, tell you nexus Roms are compatible for you, I think that's what happens. Why not just change it back to sgh T-999? And d2tmo within the build.prop.
Sent from my SGH-T999 using xda premium
mt3g said:
If going through goo it'll try and flash a recovery for the nexus, tell you nexus Roms are compatible for you, I think that's what happens. Why not just change it back to sgh T-999? And d2tmo within the build.prop.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
That's what I was wondering. So, you might as well just reboot into recovery in the first place.
that and download from the site where you know you are getting d2tmo stuff.
mt3g said:
that and download from the site where you know you are getting d2tmo stuff.
Click to expand...
Click to collapse
That goes without saying.
Sent from my Galaxy Nexus using xda premium
Related
Last night I updated to latest CM7 nightly (I believe 146 or 147 but not sure), then attempted to flash Rover Lockscreen via File manager. It appeared to flash properly but am now stuck in a bootloop. I am running Hboot0.92 and CW3.0.0.8.
When I boot into Hboot and then Recovery anything I try to do it just show the CW icon and nothing else, pressing power takes me back to CW menu.
In searching the forums I have found this post http://forum.xda-developers.com/showthread.php?t=1031752&highlight=bootloop. Should I follow the instructions from the post or is there anything else I could do.
Any help is appreciated and thank you in advance!!!
Did you try using the track pad to select things in Recovery, not the power button? Try that first.
Sent from my ADR6300 using XDA Premium App
RMarkwald said:
Did you try using the track pad to select things in Recovery, not the power button? Try that first.
Sent from my ADR6300 using XDA Premium App
Click to expand...
Click to collapse
Trackpad appears to be working. Going to install older cm nightly. Thanks!!
shanemj said:
Trackpad appears to be working. Going to install older cm nightly. Thanks!!
Click to expand...
Click to collapse
O.K I am choosing to install a zip from /sdcard/clockworkmod/download/downloadcyanogenmod.com/get/ but have cm_inc_full-###.zip my question is does the _inc_ mean that this is an incomplete download?
shanemj said:
O.K I am choosing to install a zip from /sdcard/clockworkmod/download/downloadcyanogenmod.com/get/ but have cm_inc_full-###.zip my question is does the _inc_ mean that this is an incomplete download?
Click to expand...
Click to collapse
Forget I asked that stupid questiion I found the file structure and now know that the inc means incredible.
Dumb somewhat noob question.
Standard CWM recovery
Working:
Everything
INSTRUCTIONS:
fastboot flash recovery recovery.img
Download
jmztaylor said:
Broken:
ADB in recovery
Click to expand...
Click to collapse
Check TWRP source. You might be able to find a fix there.
BTW...Great Job on this man!! :b
+1 Confirmed to work. Much thanks!
Hi
Sorry for beeing a noob
But how is this related to
http://forum.xda-developers.com/showthread.php?t=1745657
???
Thanks
max
maxwen said:
Hi
Sorry for beeing a noob
But how is this related to
http://forum.xda-developers.com/showthread.php?t=1745657
???
Thanks
max
Click to expand...
Click to collapse
2 completely different devices.. Read my other post all One V owners should read
jmztaylor said:
2 completely different devices.. Read my other post all One V owners should read
Click to expand...
Click to collapse
The one about the difference between Virigina and International?
a.k.a. PrimoU and PrimoC.?
Ok then I understand it
Thanks
max
updated. ADB fixed...
Hello I successfully unlocked bootloader and rooted my phone and now am trying to flash recovery. I get stuck in the cmd prompt saying "waiting for device" and it never moves from there. Any help?
JustinRawr said:
Hello I successfully unlocked bootloader and rooted my phone and now am trying to flash recovery. I get stuck in the cmd prompt saying "waiting for device" and it never moves from there. Any help?
Click to expand...
Click to collapse
are you in fastboot mode?
jmztaylor said:
are you in fastboot mode?
Click to expand...
Click to collapse
I wasn't but I did and now it worked thanks what is select in recovery? I know volume for up and down but nothing's working to select
JustinRawr said:
I wasn't but I did and now it worked thanks what is select in recovery? I know volume for up and down but nothing's working to select
Click to expand...
Click to collapse
Power button. Or download twrp2 that I posted. All touch based
Sent from my HTC One V using xda premium
jmztaylor said:
Power button. Or download twrp2 that I posted. All touch based
Sent from my HTC One V using xda premium
Click to expand...
Click to collapse
I'm using power button and everytime I do everything just goes away and the cwm recovery symbol shows, if I click power again, the menu shows again
Okay I flashed your touch recovery and it works.
JustinRawr said:
I'm using power button and everytime I do everything just goes away and the cwm recovery symbol shows, if I click power again, the menu shows again
Okay I flashed your touch recovery and it works.
Click to expand...
Click to collapse
Power button for select was disabled. To toggle it back on all you had to do was go from the bottom selection to top and back again a few times. It's a built-in feature in case your power key is broken
Sent from my HTC One V using xda premium
ok to clarify this IS the cdma version correct....? Sorry if this has been asked and answered a thousand times already
also link is not working...goo manager says file not found maybe I'm missing something
aaronrw said:
ok to clarify this IS the cdma version correct....? Sorry if this has been asked and answered a thousand times already
also link is not working...goo manager says file not found maybe I'm missing something
Click to expand...
Click to collapse
yes, this is for cdma. I believe there is some problems with goo.im at the moment. Jmz had asked for files if we had them. Here is the cwm recovery.img.
http://www.sendspace.com/file/cx3w4o
edit; looks like goo.im is back up
thislink isnt woring either!
It just worked for me.
Sent from my HTC One V using Tapatalk 2
link is dead
dobbs69 said:
yes, this is for cdma. I believe there is some problems with goo.im at the moment. Jmz had asked for files if we had them. Here is the cwm recovery.img.
http://www.sendspace.com/file/cx3w4o
Click to expand...
Click to collapse
Reporting this link worked for me.
Sent from my NookColor using Tapatalk 2
I'll bet if you just do a Google search for simon's primoc files, you could find them all.
I've been trying to root my TMo GS3 since about 445am this morning. I can get into download mode, I can flash the .TAR. Phone reboots fine, When I reboot into recovery, I get the stock recovery every time. I've tried a few different versions of CWM and TW and I get the same thing every time, Nothing. I bought this phone used, 2 weeks old, and it has 4.04 on it. Anybody have any insight for me? This is not my first time tinkering either. I've been here since the Sprint Mogul, and I can usually get it figured out. But this time, I'm stumped. Any help?
ADDED: I've also tried "Flashed with ODIN agian, latest CWM Touch 6.0.1.2, deselected AUTO REBOOT and F. Reset TIme, waited for it to PASS installation, pulled battery " and it still DID NOT WORK. Got that from here http://androidandme.com/thread/att-galaxy-s3-wont-boot-into-clockworkmod-recovery/
lokichim said:
why would they move it? if its solved >.> thats why i said CLOSED read next time and please dont start being annoying again by replying to all my post you were doing so good these past few days with being silent.
Click to expand...
Click to collapse
It's not solved. That was just a quote from the linked website. I guess I should edit the quote to make it a bit clearer. Sorry. NOT SOLVED. Still in dire need of help. Can anybody help?
la1z24 said:
It's not solved. That was just a quote from the linked website. I guess I should edit the quote to make it a bit clearer. Sorry. NOT SOLVED. Still in dire need of help. Can anybody help?
Click to expand...
Click to collapse
oh lol you should edit it then
try this http://forum.xda-developers.com/showthread.php?t=1771687 then go into market and downaload goomanager and install twrp
lokichim said:
why would they move it? if its solved >.> thats why i said CLOSED read next time and please dont start being annoying again by replying to all my post you were doing so good these past few days with being silent.
Click to expand...
Click to collapse
lokichim said:
oh lol you should edit it then
try this http://forum.xda-developers.com/showthread.php?t=1771687 then go into market and downaload goomanager and install twrp
Click to expand...
Click to collapse
Thank you, I will try it after I go out to dinner. Much appreciated, and I will report back!
la1z24 said:
Thank you, I will try it after I go out to dinner. Much appreciated, and I will report back!
Click to expand...
Click to collapse
no problem just odin it with auto reboot on
all you guys posting to move thread or close thread you know xda has a "report button" that works faster?
Strange but are you using the right usb cable? I had similar issue with odin not pushing through with root cause I was using my galaxy s2 cable. I switched it to my s3 cable and odin pushed through and have root from stock
Sent from my SGH-T999 using xda premium
http://forum.xda-developers.com/showthread.php?t=1735561
See my post on this link.
Sent from my SGH-T999 using xda premium
mike102871 said:
http://forum.xda-developers.com/showthread.php?t=1735561
See my post on this link.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=32428307&postcount=147
UPDATE...I used this method and it worked
I think those are for the original build LE6 though.
Use odin to get your recovery installed but uncheck auto reboot.
When done unplug and hold power untill the screen turns off. Immediately let go of power and then press and hold Power + Volume up + Home. (Be quick)
When you see blue text flash on top of screen release power but keep holding other two until you get into recovery. (You may not have to keep holding home and vol, but its always wirked for me)
Now flash your SuperSU/Superuser and reboot.
Once booted delete/rename these files:
/system/recovery-from-boot.p
/system/etc/install-recovery.sh
This will stop stock recovery from being rewritten.
Now using goo or rom manager reinstall recovery again if you so choose.
Hope that helps.
Sent from my SGH-T999 using xda app-developers app
darren.wlsn1 said:
all you guys posting to move thread or close thread you know xda has a "report button" that works faster?
Click to expand...
Click to collapse
^^^^ This ^^^^
Plus I don't have to delete any useless "Wrong Section" posts either.
Thread moved
today i downloaded from goo a CM rom and gapps. flashed them in the right order, made a backup and installed with twrp like ive done 100 times. this time was different though because after booting up instead of it asking me to pick a language and enter my gmail account, i was getting errors about setup and gapps. i figuered oh well and booted into bootloader to load my backup but upon doing so it wouldnt let me chose any other option but to choose "start". i couldnt get into recovery. can anyone point me in the right direction?
thanks
Sent from my Nexus 10 using Tapatalk HD
Try using adb. See if it let's u boot up with command prompt.
Sent From My Miui Powered Galaxy Nexus
Esteway.619 said:
Try using adb. See if it let's u boot up with command prompt.
Sent From My Miui Powered Galaxy Nexus
Click to expand...
Click to collapse
yeah im not exactly sure how. thats on the pc right? ill search thanks!
Sent from my Nexus 10 using Tapatalk HD
tapiocadestroyer said:
today i downloaded from goo a CM rom and gapps. flashed them in the right order, made a backup and installed with twrp like ive done 100 times. this time was different though because after booting up instead of it asking me to pick a language and enter my gmail account, i was getting errors about setup and gapps. i figuered oh well and booted into bootloader to load my backup but upon doing so it wouldnt let me chose any other option but to choose "start". i couldnt get into recovery. can anyone point me in the right direction?
thanks
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Power + Volume up is the button combo for entering recovery.
a manta wrote this.
bk201doesntexist said:
Power + Volume up is the button combo for entering recovery.
a manta wrote this.
Click to expand...
Click to collapse
oh man you sir are a life saver!!!
i was doing power + volume down .......doh......what the hell menu is that though?
Sent from my Nexus 10 using Tapatalk HD
tapiocadestroyer said:
oh man you sir are a life saver!!!
i was doing power + volume down .......doh......what the hell menu is that though?
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
That would be for Odin.
Sent From My Miui Powered Galaxy Nexus
Esteway.619 said:
That would be for Odin.
Sent From My Miui Powered Galaxy Nexus
Click to expand...
Click to collapse
sweet guys thanks for the help. im glad i had just made a backup too!
Sent from my Nexus 10 using Tapatalk HD
Esteway.619 said:
That would be for Odin.
Sent From My Miui Powered Galaxy Nexus
Click to expand...
Click to collapse
Edit: misread the whole thing.
Vol down + power is indeed Odin mode, not recovery mode. FYI, OP, you should really read efrant's android on the gnex 101 (its stickied on General sub forum)
Today I finally rooted my Tablet 7 with some help from gr8nole here on XDA. Needless to say I was very happy and started downloading any and all apps that required root I was interested in. Unfortunately about an hour into my adventure I downloaded an app called LCD Density. DO NOT DOWNLOAD THIS APP. It soft bricked my device after changing the density from 240 to 160. I am now just trying to get back to square one again and have no idea what to do. I wiped the cache partition and re flashed root. Reboot same thing again. The Samsung screen is vertical not horizontal and doing the infamous glow from blue to white and back to blue and nothing more continuously. I am in CWM now and not really sure what step to take next as I don't want to risk a hard brick. I went to Rom Manager in CWM and no files were there when I went to use the backup feature What should I do?
PMK19 said:
Today I finally rooted my Tablet 7 with some help from gr8nole here on XDA. Needless to say I was very happy and started downloading any and all apps that required root I was interested in. Unfortunately about an hour into my adventure I downloaded an app called LCD Density. DO NOT DOWNLOAD THIS APP. It soft bricked my device after changing the density from 240 to 160. I am now just trying to get back to square one again and have no idea what to do. I wiped the cache partition and re flashed root. Reboot same thing again. The Samsung screen is vertical not horizontal and doing the infamous glow from blue to white and back to blue and nothing more continuously. I am in CWM now and not really sure what step to take next as I don't want to risk a hard brick. I went to Rom Manager in CWM and no files were there when I went to use the backup feature What should I do?
Click to expand...
Click to collapse
Try to restore your original firmare using odin.
Sent from my SM-T210R using xda app-developers app
trazfer said:
Try to restore your original firmare using odin.
Sent from my SM-T210R using xda app-developers app
Click to expand...
Click to collapse
That is what I would like to do but having a problem locating the original firmware. Any idea where it can be found?
Update...Found it on hotfile...going to see what happens now
PMK19 said:
That is what I would like to do but having a problem locating the original firmware. Any idea where it can be found?
Update...Found it on hotfile...going to see what happens now
Click to expand...
Click to collapse
Update...I have tried using the recovery tar. file from the developers board on page 1 post 2 and still no luck. I am now downloading another file from Hotfile but it says its going to be hours before its done downloading. I will try that and hopefully I can get out of this mess. Any other advice would be greatly apreciated. This is driving me crazy!!!!! HELP PLEASE
PMK19 said:
Update...I have tried using the recovery tar. file from the developers board on page 1 post 2 and still no luck. I am now downloading another file from Hotfile but it says its going to be hours before its done downloading. I will try that and hopefully I can get out of this mess. Any other advice would be greatly apreciated. This is driving me crazy!!!!! HELP PLEASE
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?p=45951129
Sent from my SM-T210R using xda app-developers app
trazfer said:
Try this
http://forum.xda-developers.com/showthread.php?p=45951129
Sent from my SM-T210R using xda app-developers app
Click to expand...
Click to collapse
Thanks bro I actually just finally rebooted with the stock firmware. Brand new again but that's ok actually because all of the apps are backed up on Google. Now I just have to Root again...Can you believe that LCD crap is still lingering around on it? Say hello to the delete button!!!!
This is for the USA version.
http://hotfile.com/dl/240676398/83e0994/XAR-T210RUEAMG4-20130731154358.zip.html
PMK19 said:
Thanks bro I actually just finally rebooted with the stock firmware. Brand new again but that's ok actually because all of the apps are backed up on Google. Now I just have to Root again...Can you believe that LCD crap is still lingering around on it? Say hello to the delete button!!!!
This is for the USA version.
http://hotfile.com/dl/240676398/83e0994/XAR-T210RUEAMG4-20130731154358.zip.html
Click to expand...
Click to collapse
Well congrats on fixing ur tab. I suggest you odin flash twrp. Then using twrp flash universalroot.zip or infamous rom
Sent from my SM-T210R using xda app-developers app
trazfer said:
Well congrats on fixing ur tab. I suggest you odin flash twrp. Then using twrp flash universalroot.zip or infamous rom
Sent from my SM-T210R using xda app-developers app
Click to expand...
Click to collapse
Thank you..Quick question. How do you get into Recovery with TWRP? I flashed it with Odin with the auto restart and with out. I used the CWM Recovery vol up power and home keys but it does not do anything. I am rooted already as well. Could that be the issue? Im using the TAR file too. I really would like to use the touch screen option instead of pushing buttons like a dinosaur
PMK19 said:
Thank you..Quick question. How do you get into Recovery with TWRP? I flashed it with Odin with the auto restart and with out. I used the CWM Recovery vol up power and home keys but it does not do anything. I am rooted already as well. Could that be the issue? Im using the TAR file too. I really would like to use the touch screen option instead of pushing buttons like a dinosaur
Click to expand...
Click to collapse
When you flash twrp or cwm in odin, you must uncheck autoreboot. Btw hold down power vol up and home button, when samsung logo appears, release the power button while still pessing down vol up and home
Sent from my SM-T210R using xda app-developers app
trazfer said:
When you flash twrp or cwm in odin, you must uncheck autoreboot. Btw hold down power vol up and home button, when samsung logo appears, release the power button while still pessing down vol up and home
Sent from my SM-T210R using xda app-developers app
Click to expand...
Click to collapse
Do you have a working link for TWRP works with Odin? I cant seem to get this one I have to work. Thanks in advance.
Did u try this? http://forum.xda-developers.com/showthread.php?p=45413459
Sent from my SM-T210R using xda app-developers app
Why didnt you just change the density back? Open build.prop, or push a stock version of it via adb or (idk if it is possible) via fastboot.
Then yoir problem should be solved. Those tweaks have got nothing to do with cache, or data, or so
Thats also why you need root and also the reason, why it is not so easy, to root some devices
But try brain.exe and everything should work, as it should
Sent from my LG-P760 using xda app-developers app