Related
This is a guide I’ve put together from my (in)experience with flashing ACS. It mainly comes from the replies of k0nane and theimpaler747 in the SyndicateROM thread. However, since there’s so many pages that can be tricky to search for idiots like me who just throw up random posts for others to solve their problems, I thought it would be good to summarize it along with anything I happened to notice from flashing a couple of Epics. Consider it the FIBI guide.
Step 1: Read all posts by k0nane on page 1 of the SyndicateROM thread before doing a damn thing! http://forum.xda-developers.com/showthread.php?t=976194
Instructions for CWM are in this thread: http://forum.xda-developers.com/showthread.php?t=897612
Useful hotkeys:
Download mode - Hold down 1 on the keyboard when you power on the phone
Recovery mode - Hold Volume down+camera+power to power on the phone
Reset phone - Hold volume up+camera+power. This generally works when the phone is completely locked up.
Flashing:
When going between versions of ACS, check their notes to see if you need to do anything other than flash. You can go between some versions without wiping or losing anything. You can also flash between standard and fully loaded without wiping or losing anything.
Sdcard doesn’t mount in CWM, but shows up in Android - Format the sdcard in Android.
Boot hangs on the Samsung screen – Redownload, format your SD card and reflash
Boot screen flashed between different things – Wipe cache & data 3x and reflash
Journaling:
Enable journaling – In CWM, go to backup and restore. Backup, then restore using that backup. Journaling enabled!
Make it so you don’t need journaling – Keep a copy of the ROM on your phone at all times. Should you ever have data corruption, jump into CWM and flash the ROM again. It’s quick, no wipes needed.
If you restore a backup made in CWM and want to have non-journaled again – Flash the ROM after restoring.
Other issues:
FC in a specific app – Go into manage applications and clear data for that app
FC in several apps – In CWM > Advanced, try fixing permissions. Can also clear caches, and if that doesn’t work, reflash the ROM.
If you have any major issues that seem unresolved, Odin everything back to stock with EB13, format your sdcard in android, re-download everything, re-install CWM, re-read all of k0nane’s posts on page 1 and try again.
If you want ads back – Install adfree from market and hit revert
If your phone is freezing often - Flash either the vision kernel found here: http://forum.xda-developers.com/showthread.php?t=1012136 or the Twilight 1.0.4 kernel found here: http://forum.xda-developers.com/showpost.php?p=12504067&postcount=5904. I haven't had the freezing issues, but I'd recommend trying the vision kernel first as it has some other potential benefits.
Recommended tweaks and add ons:
Fugutweaks – This will smooth out a few random things on the phone. I’ve noticed more responsiveness on the lock screen and icons on my homescreen. Small, but nice. Install the ZIP in CWM, file can be found here: http://forum.xda-developers.com/showthread.php?t=981125
Impaled Keyboard – Makes the keyboard less likely to skip keys. Still have some, but they’ve gone down a lot. I use the Speed Demon Edition, still had a fair amount of dropped keys with standard one. Install the ZIP in CWM, file can be found here: http://forum.xda-developers.com/showthread.php?t=1025533&page=18
SetCPU – Handles scaling the CPU and overclocking. Use ondemand setting for smooth performance. If you have issues when the phone is idle or it doesn’t wake up properly, set minimum CPU to 200Mhz. Free for XDA members, APK can be found here: http://forum.xda-developers.com/showthread.php?t=505419
Battery Calibration – If you want to calibrate your battery without going into CWM, grab the app from this thread: http://forum.xda-developers.com/showthread.php?t=1024867. It’s now available from the Android Market.
Vision Kernel – Pretty much Twilight + gives you 1.4Ghz and Voodoo colour which improves balance when brightness is at 100%. Flash in CWM, wipe dalvik. Kernel can be found here: http://forum.xda-developers.com/showthread.php?t=1012136
And a final note that I'm now about 10 hours into testing... if you are using fully loaded and want better battery life, really try standard. It very easy to switch, it flashes over fully loaded with no wipes or data loss, the only thing you lose is that it resets your homescreens. But really, this is day 1 of it for me and 10 hours in I'm at 62% battery remaining. Usually by this time I'd be around 20%.
Great info! I recently installed the newest SyndicateROM 1.1.0 on my Epic and the only trouble I had was with the included Twilight 1.1.0 kernel. My phone kept freezing and I would have to pull the battery to reboot.
This is an issue that has been documented with the ROM and is said to be caused by the kernel and its adjustments to voltage and overclocking, not all phones handle this well.
To fix the issue I flashed the Twilight 1.0.4 kernel, as suggested by k0nane, and I am about a day into testing without any freezing issues. The only problem is that the Twilight 1.0.4 kernel has a known issue with video recording and it does not work.
Let me say that the performance increase from installing SyndicateROM and ext4 are well worth the trouble.
Have you tried the vision kernel? That might fix your freezing without breaking video recording.
is your brightness at 100%??? what was the difference between standard and fully loaded again??
VeNoM vZ said:
is your brightness at 100%??? what was the difference between standard and fully loaded again??
Click to expand...
Click to collapse
What does the brightness have to do with anything? And for the differences, here's from the SyndicateROM thread:
k0nane said:
SyndicateROM Standard includes LauncherPro. All Samsung and Sprint bloatware are completely gone!
SyndicateROM Fully Loaded - the choice of ACS team lead rjmjr69 - features TouchWiz instead of LauncherPro, and adds in Social Network Sync, Facebook, BuddiesNow, Program Monitor, and the stock live wallpapers. All the rest of the bloat is still gone!
Click to expand...
Click to collapse
Catalyst Shift said:
What does the brightness have to do with anything? And for the differences, here's from the SyndicateROM thread:
Click to expand...
Click to collapse
The brightness for battery life.
No, brightness is not at 100%. I generally use 0-25%, though I'll kick it to 100% when viewing photos or when I'm outside. Even with the lower brightness setting, I'd always have to recharge in the afternoon. I'm still doing a lot of testing for ways of having the battery last longer, today is longest it's ever gone for. I'll be adding more information when I feel like I've got a solid way of having it all setup.
OP, could you add the freezes and "terrible battery life" solutions? Namely, flash the kernel in the second post or VisionKernel. It's the most annoying one to answer multiple times daily.
Thanks much for this! Hopefully people read it.
I want to get the battery situation on my phone sorted out before adding it to the list. I was having pretty bad battery life, but switching to standard and removing gallery has made my phone last all day for the first time ever. I want to do some experiments between setcpu options, juicedefender and the vision kernel to see what works best. Hopefully by this weekend I'll have a more detailed idea as to how to get better battery life.
But for now, anyone having battery issues my current setup is using ACS standard and replacing gallery with quickpic. This has doubled my battery life.
Hey wassup everyone, first time writer long time viewer, and first let me say thanks to all the great people that have provided us with great roms for the epic and the syndicate team as well, Im currently using a Epic 4G with sindicate rom freeze 1.1.0 and i must say its awesome, aside from my battery dying really quickly when im runing it at 1.3ghz its actually great, usually i end up operatig it at 800mhz to actually save some battery life last me for 3 days at a time, and when i have it pluged in or show off my awesome epic i raise it back upto 1.3ghz, big difference cuz when i raise it up there my battery drains rather quickly like 3 percent a minute or so.....
well anyways now that, thats says, I have CWM 3..0.5 with syndicaterom twilight 1.1.0 and ive been sucessful at loading custom boot animation, but one thing is that im having trouble is loading the animation with sound? any idea onhow i can od that?, what are the steps, cuz so far ive been using root explorer to transfer and change bootanimation to load up on my screen, but i have no idea where to put the sound or how to even get it to load with the bootanimation any one have any ideas? please help, i do all his trought my phone, put the bootanimation on my sd and work from there and trasfer it to the system/media, most bootanimation that do have sound on them say to put it on the system/custimization/resources but i look every where and the syndicate rom doesnt have that archieve just the system/media, how can i load the sound into my boot? and how can i change the power off animation as wll?
Maybe someone should make a wiki "Trouble shooting guide" formatted like the ones found in the back pages of user manuals..
This might.. just maybe (crosses fingers) alleviate the never ending repeating of questions in the main sfr thread
Catalyst Shift said:
Have you tried the vision kernel? That might fix your freezing without breaking video recording.
Click to expand...
Click to collapse
Just tested Vision kernel 1.1 and ran into countless issues. My phone would not open camera, gallery, or music apps. And after that debacle I didnt even bother to find out if any other apps were misbehaving.
The first sign of trouble came when I installed a fresh version of SyndicateROM 1.1.0 and then flashed Vision kernel 1.1. The phone booted-up fine but when I went to shut down it immediately froze and I had to pull the battery.
Im going to stay on Twilight 1.0.4 kernel for a while until I find something else.
I have tested Twilight 1.0.4 kernel for about a day or two and have not had any problems so far. I even overclocked with SetCPU to 1.2GHz without any issues.
tmspyder said:
Maybe someone should make a wiki "Trouble shooting guide" formatted like the ones found in the back pages of user manuals.
Click to expand...
Click to collapse
I would be more than happy to contribute my experiences if this gets up and running. PM me with any updates to the "SyndicateROM [TSG] WiKi"
Please Help a Novice
I have installed this ROM, followed the directions and thought I did everything right. But when I rebooted the phone, I just get the Clockwork Recovery screen. Have I bricked my phone? How do I recover? Please please please help...Haven't even had my phone for a day...
By the way, the error I'm getting is:
ClockworkMod Recovery v2.5.1.0
E:Can't open /cache/recovery/log
I backed up before I installed this ROM, and Restore brings me back to this same screen / message
mercerma said:
I have installed this ROM, followed the directions and thought I did everything right. But when I rebooted the phone, I just get the Clockwork Recovery screen.
Click to expand...
Click to collapse
Please elaborate on the steps that you took to install the ROM and CWM.
What version of CWM are you running?
What modem do you have installed (...DK28, EB13, EC05)?
Have you transfered the SyndicateROM 1.1.0 onto your SD card before you installed CWM?
Did you wipe data, cache, and dalvik cache at least three times each before installing the .zip?
Your phone most likely is not bricked, that is a very hard to task to achieve. Worst case scenario you may have to do a clean wipe with odin and flash the stock ROM to start the process over. We can try to help you with any issues you may have but in the mean time try searching to the forum to find answers to these questions.
Hey, great idea for the thread.
Something I learned:
I was having AWFUL freezing problems. Tried all the fixes (vision kernel, old twilight) to no avail. If these don't fix your problems, try Genocide Kernel (on these forums). Solved my problems.
Catalyst Shift said:
But really, this is day 1 of it for me and 10 hours in I'm at 62% battery remaining. Usually by this time I'd be around 20%.
Click to expand...
Click to collapse
Ok, so im thinking of switching to the standard edition of he rom cuz im currently using the fully loaded added the 1.0 kernel vision on it to get the 1.4ghz, and its pretty smooth its stable at times so im keeping it at 1.3 for now until its set more stable..... however when u said that ure at 10 hours and u still have 62% whats the speed u have ure epic set at and whats the brightness?
Nolyrics2 said:
Just tested Vision kernel 1.1 and ran into countless issues. My phone would not open camera, gallery, or music apps. And after that debacle I didnt even bother to find out if any other apps were misbehaving.
Click to expand...
Click to collapse
Fix permissions in CWM/etc.
Kernels cannot cause that. It's that simple.
Nolyrics2 said:
Please elaborate on the steps that you took to install the ROM and CWM.
What version of CWM are you running?
What modem do you have installed (...DK28, EB13, EC05)?
Have you transfered the SyndicateROM 1.1.0 onto your SD card before you installed CWM?
Did you wipe data, cache, and dalvik cache at least three times each before installing the .zip?
Your phone most likely is not bricked, that is a very hard to task to achieve. Worst case scenario you may have to do a clean wipe with odin and flash the stock ROM to start the process over. We can try to help you with any issues you may have but in the mean time try searching to the forum to find answers to these questions.
Click to expand...
Click to collapse
I used the one step root process I found here to install CWM 2.5.1.0. I then downloaded the ROM, copied it to my SDcard, then used CWM to install the zip from my sdcard.
I don't know what modem I have, is there a way to check with my phone in it's current state?
I installed CWM previous to transferring the rom to my sd card
I did not the first time, but per instructions on the page where I downloaded the ROM, I reformatted my sd card, redownloaded the ROM, wiped everything 3x's and tried to reinstall. Same result. I keep getting the error on just about everything I do that states "E:Can't open /cash/recovery/log"
And thank you for your advise, any more would be greatly appriciated. I did search the forum, but there is so much information, hard to find what I really want, especially as a novice. I plan to not be a novice for long thanks to xda!
mercerma said:
I used the one step root process I found here to install CWM 2.5.1.0. I then downloaded the ROM, copied it to my SDcard, then used CWM to install the zip from my sdcard.
I don't know what modem I have, is there a way to check with my phone in it's current state?
Click to expand...
Click to collapse
I could probably answer that question, im still a noob, but from what i know u need to install CWM version 3.0.5/6 in order for u to run does roms, thats why ure having trouble flashing it, since Syndicate roms are EXT4 Base Roms anything lower then CWM3 wont support since they are RFS files, go here and follow the steps
http://forum.xda-developers.com/showthread.php?t=976194
download the CWM3 and root it again, u can run the CWM Root over the previous 1 so dont worry, i did it that way and i had no problems what so ever, as to check to see what modem u had, go to settings, about phone, under base band version check to see if the last 4 letters says EB13, or DK28, or if u have the ECO5 which is the newest stock base update that came out.
Also its best to know if ure phone is from stock, or if u updated from any of the first 2 version updates, EB or DK, if u where like me that waited for the update and stayed at Eclair then updated when the ECO5 OTA came out then u should be fine....
Just incase u are from a update of EB or DK here is the link for does 2 versions of CWM3
http://forum.xda-developers.com/showthread.php?t=897612
if im wrong then someone please correct me im still a noob learning.
EDIT: just noticed that u said ure phone is messed at that point, umm u can try to do a factory reset then restart ure phone see if that fixes the problem, then try follow the steps above, if that doesnt work, u will have to download odin, which is also in that link and reflash back to stock, everything is there so if u follow does instrunctions u wont have a problem.....its actually pretty easy.....
My default android camera randomly stopped working. Earlier today I tried taking a photo and my phone froze until it finally went to a completely black screen. A message popped up saying I could wait or force close the app, and I clicked force close. Now every time I try to use the camera, I get the same black screen and the only way to get out of it is to lock and then unlock my phone.
EDIT: For some reason my Tapatalk app didn't have the Q&A thread, any way to move it?
This is a ROM error and occur in old builded ROMs such as MIUI, Old CyanogenMod Builds (CM6), and sometimes Virtous ROMs. This error is mainly because the system has an alternate Camera App running on the system thus controlling passages to the original Camera's files. This can be fixed by:
Choice 1: Flash a new ROM that is of newer build.
Choice 2: You can try fixing the permissions in Rom Manager and rebooting.
Choice 3: Use the alternate Camera app (Pre-Installed on the ROM)
Choice 4: Use a root accessible program and remove the system app.
If this helped a little please thank... Lol ;P
*If you need more help feel free to contact!
Thanks bud, what would you recommend would be the easiest method?
If your phone is rooted with S-OFF and all that other stuff then seriously just find a stable rom that you like. Then from there all you need to do is flash a new ROM by booting into recovery either by restarting the phone and holding volume down OR if you have ADB set up then use adb reboot recovery.
Flashing a stable rom will ultimately solve your camera problem. As for a stable rom I would definitely suggest virtuous ROM.
That would probably be the easiest way. Otherwise you could try extracting the camera apk from another rom and installing that which is an extremely difficult thing to do or install an alternate camera app from the market like fxCamera.
I'm fine with my stock ROM, but doesn't Virtuous eat up a lot of battery?
Also I've tried fixing permissions with ROM manager and it didn't work. I've tried using the Pure Gingerbread ROM from the Dev Forums, but the camera didn't work either.
Actually Virtous does use alot of battery mainly because all of the required processes needed to run the system. I think the best method is use a blackmarket app and download an alternate Camera or use the extra camera app on the phone...
--- I would say methods 3 and 4.
I AM VS4 said:
Actually Virtous does use alot of battery mainly because all of the required processes needed to run the system.
Click to expand...
Click to collapse
What "required processes" are you talking about? I haven't noticed battery drain to be any worse on Virtuous than CM7 or any other ROM.
I'm guessing I have to get a separate camera app then? Using another ROM or fixing permissions didn't work.
EDIT: Turns out Camera ZOOM FX doesn't work either.
In my opinion virtuous doesn't burn a lot of battery unless you use the stock kernel it comes with. I found that the battery life almost tripled when I flashed the advanced virtuous kernel (1.0.9) onto it.
Just to clarify, Every rom will consume a lot of battery. Some just run fewer processes in the background or are less CPU intensive but regardless of all of that if you use a power efficient kernel (essentially a driver for your android) then your battery life will sky rocket. You should be looking for UV or undervolted kernels.
Anyways, back to topic. Try flashing a newer radio onto your device. Then if you can try using Virtuous. Your camera should definitely work with virtuous in all honesty. If you like virtuous then just flash one of the advanced kernels and then watch the battery life sky rocket.
Aegishua said:
In my opinion virtuous doesn't burn a lot of battery unless you use the stock kernel it comes with. I found that the battery life almost tripled when I flashed the advanced virtuous kernel (1.0.9) onto it.
Just to clarify, Every rom will consume a lot of battery. Some just run fewer processes in the background or are less CPU intensive but regardless of all of that if you use a power efficient kernel (essentially a driver for your android) then your battery life will sky rocket. You should be looking for UV or undervolted kernels.
Anyways, back to topic. Try flashing a newer radio onto your device. Then if you can try using Virtuous. Your camera should definitely work with virtuous in all honesty. If you like virtuous then just flash one of the advanced kernels and then watch the battery life sky rocket.
Click to expand...
Click to collapse
I don't know how to do that or where to even start. *sigh* Seems like anything I try fails.
Well if your phone is rooted then all you need to do download the ROM you want and the kernel you want. Then put them both on your sdcard. From there boot into recovery and then install via ZIP and then select your ROM first. After that process is complete you wanna restart your phone and set it all up. Once you're happy go into recovery again and then install the kernel.
If the camera worked before, and its not now, I would think a full wipe and flashing back to stock would work. Or just returning to an old nandroid backup (from when the camera was still working), if you have one. Or you might try a factory reset.
Also, if you switched ROMs, and the camera is still not working, I suspect that not wiping the data, cache, and dalvik might be the culprit. If you were going from a Froyo ROM to a Gingerbread ROM, you should do a full wipe.
Using an alternate app seems like a silly solution. It shouldn't be that hard to get your packed-in software working.
Also, I would not suggest changing the radio, unless you have specific reception and/or battery issues, or you are switching to a different ROM with a specific recommended radio. "If its not broke, don't fix it" is the common mantra for radio flashing, as its an unlikely but possible way to brick your phone. Its also possible your reception and battery life will be worse after changing radios. IMO, if your reception is good, don't mess with the radio.
I'm not entirely sure where this topic would go, but I have figured out how to get wildchild 2.0 and 3.3 up and running on the VM WFS. It might work for other CDMA Wildfires, but I'm not sure. I figured it out after reading a post by 'threefootsmurf' who said he got it working. I'm just making a tutorial on how to install it and get it running fully without problems, since I had a few problems, and to show that we have a great rom for CDMA phones. Oh and these steps are pretty straightforward, but I left out things like backing up everything since you should be in the habit of it already.
1. Download the wildchild file. Either 3.3 or 2.0, I have found that the odex version for 2.0 and the deodex for 3.3 tend to work better than the other..
2. Download the 'Hensemod' VM patch.
3. Put them on the root of you micro sd.
4. Boot to recovery and factory reset and wipe dalvik
5. Flash the wildchild ROM.
6. Boot the phone and go through everything, you will probably get error messages and the phone may shut off and power back on, but your main goal is to get to the home screen after doing the google setup and everything.
7. Reboot back into recovery and do a factory reset and dalvik wipe again.
8. Flash the hensemod VM Patch. (You may need to reflash the rom again and then the VM patch in one go here, it all depends)
9. Boot the phone and go through the google set up and everything again, and the phone should be in working order.
Those were the exact steps I used. I tested multiple ways to do it, some gave me bootloops, some stayed on the HTC splash screen, and some kept rebooting the phone. I like the wildchild ROM and this tut will open up the wonderful rom for VM and possibly all other CDMA users. I hope this helped you guys.
Wildchild 3.3: http://forum.xda-developers.com/showthread.php?t=1842771
Wildchild 2.0: http://forum.xda-developers.com/showthread.php?t=1652973
Hensmod: http://forum.xda-developers.com/showthread.php?t=1434497
thanks for the shout out.
yeah not sure why exactly but i usually need to flash the keyboard add-on to get any keyboard function. and the flashing of the rom on official CWM for marvelc seems to have its issues like deodexed don't like to load right or boot loops. after i switched to the unofficial CWM touch recovery for our phones not an issue at all loading after flash. and i usually flash it all at one time. if anyone has the same CWM as me, to do a data/cache reset select it then press vol up 5 times and you are on yes even though you can not see the option, press power and let it finish its wipe. definitely a great fast rom. found some new tricks i wasn't to test so might go back up to 3.3 soon for the extra speed boosts, only thing holding me back is i don't want to spend a whole night restoring my apps backups again lol.
love experimenting with this little thing though even if i am slightly noob to droid
I advise you to post tutorials like this in the General section
threefootsmurf said:
thanks for the shout out.
yeah not sure why exactly but i usually need to flash the keyboard add-on to get any keyboard function. and the flashing of the rom on official CWM for marvelc seems to have its issues like deodexed don't like to load right or boot loops. after i switched to the unofficial CWM touch recovery for our phones not an issue at all loading after flash. and i usually flash it all at one time. if anyone has the same CWM as me, to do a data/cache reset select it then press vol up 5 times and you are on yes even though you can not see the option, press power and let it finish its wipe. definitely a great fast rom. found some new tricks i wasn't to test so might go back up to 3.3 soon for the extra speed boosts, only thing holding me back is i don't want to spend a whole night restoring my apps backups again lol.
love experimenting with this little thing though even if i am slightly noob to droid
Click to expand...
Click to collapse
I know what you mean I'm a pretty big noob at this stuff too, but it's fun thinking I have some kind of involvement in something. I'm using WC 2.0 right now since I can't get 3.3 to load on the odexed version with wifi and data working. I gotta edit my post. I got the deodexed version running, but it's got bugs, like FB wont work, and a few apps wont work right either, and of course no A2SD support... Lame. And I tried flashing all at the same time. But i'd get bootloops with 2.0. So I had to do it the way I described. Not sure if it's my phone my recovery or what. But yeah....
THANKS
This should be stickied for marvelc.
Thank's wc running great on marvelc.
Sent from my HTC_A510c using xda app-developers app
I just flashed WildChild 3.3 to my VMUSA Wildfire S last night. Here is my experience so far:
Definitely install WC and the VM patch right on top of each other in one shot
Skip the keyboard tutorial in the setup
If you get to the wifi setup and yours isn't listed, you need to wipe/reset/clear dalvik and install both files again or you're gonna have a bad time
I've got video playback problems. Videos I record playback with horizontal matrix green crap, and videos in the YouTube app give me audio only
Opinion: There are a few things I don't like about WildChild which are causing me to abandon it after 24 hours. The video issue is unacceptable, and a bunch of strange app choices make this not much better than the crap apps that come with HTC/VM Sense to begin with. Stock browser is absent in favor of Dolphin, no Google Talk app, no default Calendar, required use of Startup Manager (Free) which I feel is pretty useless to me, and a whole list of other apps (like a dozen) I am too lazy to deal with. I realize what I am looking for is a barebones setup, and I'm going to look for it starting now.
Thanks for this post. I've been running Wildchild 2.0 for a few months now. The video issue mentioned above comes & goes with certain app installations - oddly enough a reinstall of the youtube app usually clears it up on my WFS.
Hey all -
I have a T-Mobile Galaxy SIII with TWRP, AOKP JB Milestone 5 and GooManager. I got a pop-up for AOKP JB Milestone 6 this morning, so I downloaded it and added that file, Lean Kernel 2.9 and gapps (latest that could be downloaded) to the flash list. I set my Dalvik cache to clear before flashing anything, then rebooted the phone to flash everything. Immediately after the flash, the phone seemed to reboot, but with a blank screen. After a while, the capacitive buttons on the front started working and when I plugged the phone into my computer the file transfer program popped up.
However ... at no point can I ever get anything to display on the screen. I've tried rebooting into recovery (volume up, home button, power button) and nothing. I don't really care about the data on my phone, I have proper backups of everything. But what I can't seem to do is get it to a point where I can recover it. What are my options here if rebooting into recovery doesn't work?
Thanks!
As an addendum, the phone is clearly booted into the OS. I have a blinking notification LED that indicates a new e-mail, and calls placed to the phone cause it to ring. I just can't see .... anything on it.
I was able to get into TWRP, somehow. I took out my T-Mobile SIM card and had it plugged into USB. I held down the recovery combo and then it booted up into recovery. It also displayed the Galaxy SIII white splash screen for the first time since the bad flash. What the hell.
chuffykow said:
I was able to get into TWRP, somehow. I took out my T-Mobile SIM card and had it plugged into USB. I held down the recovery combo and then it booted up into recovery. It also displayed the Galaxy SIII white splash screen for the first time since the bad flash. What the hell.
Click to expand...
Click to collapse
so was you able to use your phone again i say go back to a nandroid you have or flash a rom that you know works good on your phone without that white screen and trouble shoot from there that it very strange indeed if you get success with the other just try posting in the ROM thread that you flashed you could possibly get more help where it happened :good:
I went back to AOKP Milestone 5 after doing a full wipe. I saw a number of graphics changes in the Milestone 6 code review, so it's possible that had something to do with it. In any case, I'm no longer panicing
Does mr6 use the 3.4 kernel? If yes, then you were using the wrong version of leankernel.
Ya its all kernel related and user error.
Aerowinder said:
Does mr6 use the 3.4 kernel? If yes, then you were using the wrong version of leankernel.
Click to expand...
Click to collapse
mt3g said:
Ya its all kernel related and user error.
Click to expand...
Click to collapse
I assumed it was user error. I just wanted to lay out the steps I took, so I could get some help on a recovery path. I thought that a JB based ROM would work with any kernel that supports JB. Looks like I was wrong.
chuffykow said:
I assumed it was user error. I just wanted to lay out the steps I took, so I could get some help on a recovery path. I thought that a JB based ROM would work with any kernel that supports JB. Looks like I was wrong.
Click to expand...
Click to collapse
Nope, JB can be AOSP, TouchWiz, 4.1, 4.2, 4.2.2, 3.0 kernel, 3.4 kernel. Just need to read and make sure you know what you're doing before just doing it. That's why I frown at people being lazy (not just you) and not reading the forums and such, and just using apps to update and flash.
mt3g said:
Nope, JB can be AOSP, TouchWiz, 4.1, 4.2, 4.2.2, 3.0 kernel, 3.4 kernel. Just need to read and make sure you know what you're doing before just doing it. That's why I frown at people being lazy (not just you) and not reading the forums and such, and just using apps to update and flash.
Click to expand...
Click to collapse
Thank's for the condescension, I appreciate being called lazy. I might not have an encyclopedic knowledge of Everything Android, but between the knowledge I do have and the details I read on the AOKP release page, I saw nothing that indicated I _couldn't_ run LeanKernel, especially when it was only a point release on the same ROM I was previously using.
I had a look at the changelog that's available on their page. It's pretty lame. http://gerrit.sudoservers.com/#/q/status:merged,n,z that one will probably have the kernel info. A good rule of thumb is when you flash a new rom, wait until the kernel is up to date (release date). For instance, don't flash a 3/01 kernel on a 4/24 rom - wait for kernel update.
I don't recommend flashing anything with the 3.4 kernel right now. Even if you manage to pull off stability, it's still laggy and eating about 3x the battery it should. This goes for the custom kernels, too. I'll put up with stability issues, but can't deal with bad battery. Already bad enough as it is. Need my phone during the day and not near a charger.
chuffykow said:
Thank's for the condescension, I appreciate being called lazy. I might not have an encyclopedic knowledge of Everything Android, but between the knowledge I do have and the details I read on the AOKP release page, I saw nothing that indicated I _couldn't_ run LeanKernel, especially when it was only a point release on the same ROM I was previously using.
Click to expand...
Click to collapse
calm down lol, you could have read up any of the kernel threads that there are some compatible issues with kernels and roms right now.
Aerowinder said:
I had a look at the changelog that's available on their page. It's pretty lame. http://gerrit.sudoservers.com/#/q/status:merged,n,z that one will probably have the kernel info. A good rule of thumb is when you flash a new rom, wait until the kernel is up to date (release date). For instance, don't flash a 3/01 kernel on a 4/24 rom - wait for kernel update.
I don't recommend flashing anything with the 3.4 kernel right now. Even if you manage to pull off stability, it's still laggy and eating about 3x the battery it should. This goes for the custom kernels, too. I'll put up with stability issues, but can't deal with bad battery. Already bad enough as it is. Need my phone during the day and not near a charger.
Click to expand...
Click to collapse
Thanks for the tip! I appreciate it.
Hi
Guys i need your help. Pleas can someone tell me for now what mods is much better for I927R (Also withe very stability and with much less bugs) ?!
I found Liquid Smooth but it have some problem so i need your guide about other mods.
Thank you
ICS Roms are the best and most stable... Stock ICS from AT&T UCLJ3 or any roms based off of it ... Dman's daily driver, Ice Pop Rom by RawRaw, LiteRom by TheGreaterGood...
Unfortunately none of those are being maintained but I had been running Dman's for the last couple months, great battery life when paired w/ JuiceDefender (20+hours of heavy use when I'm not sleeping).
Now the newest CM10.1 by Spyke seems pretty solid ... Just a couple of issues.
ICS is the only one you'll get bug free, though. Stock is hard to compete with when we're pairing up roms without a true Devdeloper.
On this subject, I've just reverted back to using IcePop ROM after (unhappily) downgrading from Spyke's latest 10.1 ROM - just mainly because of the Bluetooth headset issue, which I really need working for work purposes.
I'm just wondering if there are any ICS builds that have GPS working correctly? I tried flashing the Rogers modem (since my phone was originally a Rogers import, flashed to AT&T ICS, then played with ICS from there) and first time I ran GPS status it took 771 seconds... I'm going to keep trying just in case that was the first time only, but 12 minutes is still a very long time for an initial fix .
Also - I've found that I'm getting more and more bootloop problems even with clean installs - so wiping cache, data, dalvic, etc. Is there some way to do a *thorough* wipe without bricking the phone? I can back all my data up no worries, but next time I move to JB (in the optimism that the BT issues will be fixed soon, judging by the positive progress being made by Spyke ) I would like to do a clean build from scratch and not have to gamble being able to start the phone up again
David - I always go into mount options of CWM and format /system prior to a new flash .. I'm not sure if flashing with Odin will get rid of any previous settings, its something to attempt though.
I, also, had reverted to using JB Because GPS wouldn't work ... There's a thread in here (search for it) that shows the solution to the GPS fix, its editing sirgps.conf and gps.conf ... I was getting a fix on GPS in under 30 seconds.... GPS was a huge let down in the stock ICS rom, Even when using TheGreaterGoods LiteRom w/ GPS fix I found after a couple of days my gps didn't hold....
Thanks for the reply.
I was considering formatting /system this morning when I was getting stuck in a boot loop from trying to get M3 running, but decided it was a risk I'd have to check up on first . Next time I do a build from scratch (I'm going to resist until the BT stuff is working - fingers crossed!) I'll do that.
I remember having a look at the gps.conf fix but don't recall anything about sirgps.conf - so I will look it up, thanks!
As an aside, I've been checking the GPS fix a couple of times since my last post and it is coming up in under 30 seconds each time... I'm wondering if my attempt to flash the Rogers modem did in fact fix the issue... I'd do a reboot but I'm too scared I won't get the phone up again XD
EDIT:
Found the fix, I did a few of the changes (rather than all of them), and it's now picking up 8 satellites instead of 3-5, and getting a stronger signal from each... and all I did was point it to the AU ntp server, and tell it I'm not on the ATT network . I'll save the suggested settings to a text file on my SD card so next time I'm out and about and if it plays up I'll have access to the details.
yohan4ws said:
David - I always go into mount options of CWM and format /system prior to a new flash .. I'm not sure if flashing with Odin will get rid of any previous settings, its something to attempt though.
Click to expand...
Click to collapse
Had to restart my phone tonight and got caught in a boot loop again... after trying a few things I flashed Lite Kernel (I'm still using ICS again at the moment) and that seems to have solved the boot loop issues. I'm thinking that with all the ROM flashing I've been doing the fact that I actually had the phone running without flashing an ICS specific kernel (after running JB) was screwing things up.
Interestingly though, I tried installing Spyke's M3 ROM from a complete user wipe, system format, everything gone - and I still got a boot loop so next time I try it I'll grab a copy of LiteKernel and do that separately.
davidpartay said:
Interestingly though, I tried installing Spyke's M3 ROM from a complete user wipe, system format, everything gone - and I still got a boot loop so next time I try it I'll grab a copy of LiteKernel and do that separately.
Click to expand...
Click to collapse
That has to be very concerning to you, I've never had an issue booting any ROM. And very strange flashing the Kernel separately would resolve your booting issues...
Did you try to flash any of the stock roms w/ Odin ? I have read that we can only flash back to stock Gingerbread from JellyBean if we flash a GB or ICS CWM ROM and then go back with Odin otherwise there will be boot issues.
If I were in your position I would try and do a full revert back to the earliest version of gingerbread I could find on samfirmware and then use Kies to udpate - THEN I would retry flashing to a newer JB or ICS Rom.
Pretty time consuming but that is the price we pay to mod
davidpartay said:
Had to restart my phone tonight and got caught in a boot loop again... after trying a few things I flashed Lite Kernel (I'm still using ICS again at the moment) and that seems to have solved the boot loop issues. I'm thinking that with all the ROM flashing I've been doing the fact that I actually had the phone running without flashing an ICS specific kernel (after running JB) was screwing things up.
Interestingly though, I tried installing Spyke's M3 ROM from a complete user wipe, system format, everything gone - and I still got a boot loop so next time I try it I'll grab a copy of LiteKernel and do that separately.
Click to expand...
Click to collapse
My phone has an issue, simple I couldnt reboot it, I must power off and wait a little. You can try it when you flash something, just remove battery and usb cable, and wait 2 minutes, before you turn on.
yohan4ws said:
Did you try to flash any of the stock roms w/ Odin ? I have read that we can only flash back to stock Gingerbread from JellyBean if we flash a GB or ICS CWM ROM and then go back with Odin otherwise there will be boot issues.
Click to expand...
Click to collapse
Not yet. I'll have to check which ones I have - I'm certain I have the AT&T ICS rom from November but then I'd have to go digging through my email for the unlock code again, so I'm trying to avoid doing that at this point . If i can find the stock GB Rogers rom at some point I might flash that one back on before I do any more upgrades. The phone is up and running at this point though, so I'm not too fussed. I've also noticed that it's a little quicker than before so I think the version of LiteKernel I installed was a good idea anyway.
bubor said:
My phone has an issue, simple I couldnt reboot it, I must power off and wait a little. You can try it when you flash something, just remove battery and usb cable, and wait 2 minutes, before you turn on.
Click to expand...
Click to collapse
I've tried pulling the battery a few times, but probably no longer than 30 seconds. Next time I'll give it a couple of minutes. I tend to do this late at night when I'm not expecting any calls (except fire brigade but I have a pager for that too) so time without a phone is no issue to me
Yesssss
After much irritation at continually getting stuck in boot loops again, I've 'Oneclicked' the phone twice, got fed up with the AT&T ICS ROM within about 5 minutes, gave up on IcePop because of buggy GAPPS...
And thought, bugger it. Format /system. Factory reset. Clear cache + Dalvik. Installed in this order:
Jellybean 4.2 ROM from 0217
Spyke's M3 update
PAC rom
GAPPS dated 0427
"Kick-ass Kernel"
and it BOOTED FIRST GO
I am pleased
Does JB need already to be installed before putting the M3 revisions on? Maybe that's where I've been going wrong all along, because my attempts at running both the standard M3 and PAC ROM (even immediately after OneClicking) resulted in boot loops or eternal boot loading.
Uhh... what do you mean by "One Clicking" ??
I know there's a "superoneclick" that will flash and root the rom all at once, but I never personally found it to work for our glides.
Using CWM and installing the ROM through the CWM boot menu is severaly key presses so ... not too sure what you're referring to.
Also, I've always downloaded to a hardwired computer then copied over USB to my phone and flashed ... sometimes the download will have errors if I grab it from my phone.
I'm assuming it's a variant of SuperOneClick... The title is 'Odin3Excution v1.85' and then underneath it says 'I927UCLG9_OneClick'.
And it worked just fine, I did have a stock rom that I tried to flash with Odin but it kept giving me errors, the OneClick method worked.
davidpartay said:
I'm assuming it's a variant of SuperOneClick... The title is 'Odin3Excution v1.85' and then underneath it says 'I927UCLG9_OneClick'.
And it worked just fine, I did have a stock rom that I tried to flash with Odin but it kept giving me errors, the OneClick method worked.
Click to expand...
Click to collapse
Interesting... for future reference, www.samfirmware.com has the stock firmwares, then there's the superUser file floating around the forums that allows you to root by flashing it. Passed that, remove bloat.
Glad you got it working! Welcome to JB