Yesterday I am trying to flash the CM 10.1 rom for my Note 2. Mine is an international version (GT-N7100). I follow all the steps and do exactly what i should do but it fail. Does any one know if CM 10.1 can be flashed into note 2?
Sorry for my bad english lol
Flash the latest rom from here with a full wipe.
http://get.cm/?device=n7100
Sent from my GT-N7100 using xda app-developers app
What kind of problem do you exactly have? After cm 10.1 install and reboot your system you get a flickering screen and then blank black screen?
Sent from my GT-N7100 using xda premium
T511 said:
What kind of problem do you exactly have? After cm 10.1 install and reboot your system you get a flickering screen and then blank black screen?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Yes, thats the problem I get. I did full wipe also. So I am not sure what the problem is.
kokorolove said:
Yes, thats the problem I get. I did full wipe also. So I am not sure what the problem is.
Click to expand...
Click to collapse
I also had the same problem. Flickering screen after clean cm 10.1 install. I was advised to wait to wait several minutes even if screen flickers. I installed cm 10.1 screen started flickering then gone black. I waited 3-4 minutes and then pressed power button to unlock screen... wualllla )) cm10.1 setup screen. I set up cm 10.1 and it worked normally. Anyway when I restarted phone screen kept flickering again but booted faster. So as I understand I could use cm10.1 without boot animation.... but it loads and works . Anyway I dissappointed in cm10.1 because of this and returned to stock. Hope soon I will get answer why screen flickering aftet cm10.1 install ( looks like you do not have boot screen ... but it boots up ) . Hope soon will get fix.
Sent from my GT-N7100 using xda premium
T511 said:
I also had the same problem. Flickering screen after clean cm 10.1 install. I was advised to wait to wait several minutes even if screen flickers. I installed cm 10.1 screen started flickering then gone black. I waited 3-4 minutes and then pressed power button to unlock screen... wualllla )) cm10.1 setup screen. I set up cm 10.1 and it worked normally. Anyway when I restarted phone screen kept flickering again but booted faster. So as I understand I could use cm10.1 without boot animation.... but it loads and works . Anyway I dissappointed in cm10.1 because of this and returned to stock. Hope soon I will get answer why screen flickering aftet cm10.1 install ( looks like you do not have boot screen ... but it boots up ) . Hope soon will get fix.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
So maybe I should try one more time with that, I just flashed to MIUI rom but like kind of wired...I love the look of the cm
CM 10.1
Will someone give any explanation to this situation? Why screen flickers and shakes after I install cm10.1 ?
Check "Force GPU Rendering" in developer options. If developer options doess not show in your system settings, tap "about phone" 7 times and developers options will appear.
I checked it and the same result.
Sent from my GT-N7100 using xda premium
Look in cm10 nightly forum.
I read about screen flicker there.
Sent from my GT-N7100 using xda app-developers app
Related
So first off the app search function sucks...
Has anyone had a problem where the screen suddenly becomes unresponsive to touch? I can turn the screen on and off just fine with the power button but can't actually unlock it since it doesn't recognize my finger touching the screen. Only way to fix it was to do a battery pull.
I'm also on Eagles Blood with the latest Franco kernel.
I've never experienced this problem. I've run Codename Android, Redemption Rom, and currently on AOKP. I've used Leankernel, Defiant kernel and am currently using Faux123's kernel. As far as the app search function I can't concur because I've never used it.
Sent from my Galaxy Nexus
gravis86 said:
So first off the app search function sucks...
Has anyone had a problem where the screen suddenly becomes unresponsive to touch? I can turn the screen on and off just fine with the power button but can't actually unlock it since it doesn't recognize my finger touching the screen. Only way to fix it was to do a battery pull.
I'm also on Eagles Blood with the latest Franco kernel.
Click to expand...
Click to collapse
To answer your question: No.
Was the phone plugged in when it was unresponsive?
Sent from my Galaxy Nexus using XDA App
i have the same experience, once in a while,
if you have patience, if you wait like 5-10 mins later, it will be responsive again.
I had the unresponsive screen when I turned the screen on to unlock but I couldn't draw my unlock pattern. Closed and opened the screen using power button twice and it was working again. I've also noticed that sometimes the screen doesn't register touches soon after turning it on. Have to always redraw my pattern because first bit is missed off.
Sent from my Galaxy Nexus using xda premium
qwerp_ said:
i have the same experience, once in a while,
if you have patience, if you wait like 5-10 mins later, it will be responsive again.
Click to expand...
Click to collapse
Same here. Very annoying. Is there a fix yet?
I had this problem once since having the phone in November. I did do a battery pull but its good to know you can wait 5-10 minutes.
Also stock phone 4.0.2 ota so its happening on unrooted phones as well.
Sent from my Galaxy Nexus using XDA App
qwerp_ said:
i have the same experience, once in a while,
if you have patience, if you wait like 5-10 mins later, it will be responsive again.
Click to expand...
Click to collapse
There is said to be a multi touch issue with the galaxy Nexus, I have experienced it myself. There is not a fix that I know of for the issue yet.
Sent from my GNex running gummy v0.7.0
Hydera5 said:
There is said to be a multi touch issue with the galaxy Nexus, I have experienced it myself. There is not a fix that I know of for the issue yet.
Sent from my GNex running gummy v0.7.0
Click to expand...
Click to collapse
This thread is not about the issue.
Sent from my Galaxy Nexus using XDA App
Hey guys wanted to ask about the best daily driver for the t989 on jellybean? i am currently on jedi mind tricks v9 and i like it a lot but would like to try more out..any suggestions?:laugh:
I believe there isn't a stable one yet. There is one decent one, but you can't get it on here. I forget the dudes name. He use to be on here but left.
Sent from 4.52 inches of T989
Jb roms here are all having the similar issues.. Either screen flickering or random reboots / sleep of death.. That is when your phone reboots on its own but never completely boots and need to be manually restarted.. If you can deal with any of those problems then you've ill be very happy with any jb rom you try.. I am running aokp and am very happy with it atm
Sent from my SGH-T989 using xda premium
rymanh said:
Jb roms here are all having the similar issues.. Either screen flickering or random reboots / sleep of death.. That is when your phone reboots on its own but never completely boots and need to be manually restarted.. If you can deal with any of those problems then you've ill be very happy with any jb rom you try.. I am running aokp and am very happy with it atm
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Is AOKP smooth, i mean did you have any issues with it? cause i am thinking of flashing it and also does google now /new google search work?
adil17 said:
Is AOKP smooth, i mean did you have any issues with it? cause i am thinking of flashing it and also does google now /new google search work?
Click to expand...
Click to collapse
I've been running the aokp since build 1 and i haven't switched back to gb or ics since i think it's a huge difference from both. I like it a lot, it's very smooth, the flicker can be get rid of by choosing a few options in settings like disable hw overlay, which completely gets rid of the flicker for me. I don't use google now but the search works yeah. I get random reboots and either pull the battery or wait a few seconds and then hold down the power button until it restarts, but it doesn't bother me as much it rarely happens at important times, usually it happens after i lock the phone and put it in my pocket. Also it freezes sometimes too but not too often.
nkia2sg said:
I've been running the aokp since build 1 and i haven't switched back to gb or ics since i think it's a huge difference from both. I like it a lot, it's very smooth, the flicker can be get rid of by choosing a few options in settings like disable hw overlay, which completely gets rid of the flicker for me. I don't use google now but the search works yeah. I get random reboots and either pull the battery or wait a few seconds and then hold down the power button until it restarts, but it doesn't bother me as much it rarely happens at important times, usually it happens after i lock the phone and put it in my pocket. Also it freezes sometimes too but not too often.
Click to expand...
Click to collapse
so can it be used as a daily driver?
adil17 said:
so can it be used as a daily driver?
Click to expand...
Click to collapse
I've been using AOKP as a DD for a while now I love it. I would suggest flashing the newest nightly (9-18). It's all about preference with ROMs, I love all the ways to customize AOKP.
It's like I tell everyone though, just flash it and test it out for yourself. Always make a nandroid just incase if you don't like it you can always flash back... no harm no foul. Ever since JB leaks I haven't gone back to anything else.
You won't be disappointed. Just follow the instructions and read up on the threads before posting questions/problems because if you experience an issue chances are other people have as well and there's a fix.
Have fun!!!
FarReach said:
I've been using AOKP as a DD for a while now I love it. I would suggest flashing the newest nightly (9-18). It's all about preference with ROMs, I love all the ways to customize AOKP.
It's like I tell everyone though, just flash it and test it out for yourself. Always make a nandroid just incase if you don't like it you can always flash back... no harm no foul. Ever since JB leaks I haven't gone back to anything else.
You won't be disappointed. Just follow the instructions and read up on the threads before posting questions/problems because if you experience an issue chances are other people have as well and there's a fix.
Have fun!!!
Click to expand...
Click to collapse
I just flashed the aokp rom and its been stuck on the boot up screen for more than 10 mins now, is this normal?
adil17 said:
I just flashed the aokp rom and its been stuck on the boot up screen for more than 10 mins now, is this normal?
Click to expand...
Click to collapse
How did you flash and what recovery are you on? Did you use any darkside scripts??
FarReach said:
How did you flash and what recovery are you on? Did you use any darkside scripts??
Click to expand...
Click to collapse
i flashed using cwm touch and followed every instruction and it still stuck i have rebooted it several times and its still stuck please help!
adil17 said:
i flashed using cwm touch and followed every instruction and it still stuck i have rebooted it several times and its still stuck please help!
Click to expand...
Click to collapse
Sent from my SGH-T989 using xda app-developers app
Reflash... sometimes these things happen don't sweat it your phone isn't broke. I flashed an earlier build 5 or 6 times until it worked correctly.
If at first you don't succeed.....
I've just switched to ericwill's CM10 build from AOKP due to SOD issues and battery life issues.
No RR or SOD yet and greatly improved battery life so far. Been running for about 18 hours.
As a side note, I much prefer AOKP for its customization, but I'll take stability over customization any day.
Of course, YMMV.
Sent from my SAMSUNG-SGH-T989
I ran CM10 09_17 and AOKP 09_18 got RR on both and SOD on CM10, then i tried Paranoid 2.13(CM10) and its been great!! atm am on 26hrs uptime with no issues.
I've run BinaryBishops, AOKP, CM10, and now Paranoid 2.13 which I've been running around 27-28 hours uptime. Only one I haven't experienced any reboots or sod or any of the like was Binarys' but Paranoid is the smoothest by far. Camera, music, keyboard all super responsive, no lag I've noticed at all. Running stock Trebuchet and haven't gutted it like I normally would, delete what I don't use and the like. Binarys night lies seem to be on hold for whatever reason
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
The first time you boot it up after flashing it's on the unicorn symbol for a while but not 10 mins lol
Sent from my SGH-T989 using xda app-developers app
Did you have trouble with flickering in aokp, if so do you know how to fix it?
Sent from my SGH-T989 using xda app-developers app
Do you know how to fix the flickering problem? I am on build 2 and am getting annoyed.
Sent from my SGH-T989 using xda app-developers app
adil17 said:
Do you know how to fix the flickering problem? I am on build 2 and am getting annoyed.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Disable HW overlays at developer options.
Sent from my SAMSUNG-SGH-T989 using xda premium
parusia said:
Disable HW overlays at developer options.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Actually, I found this in the aokp thread and that fixed the flickering for me when I was running aokp. Make sure to reboot afterward
Sent from my SGH-T989 using Tapatalk 2
Thanks
Sent from my SGH-T989 using xda app-developers app
Am I the only one who consistenly experiences flickering with the latest nightlies AND stable release? Every time i pull up the keyboard or drag down the notification bar while on the settings menu or messaging or any other system app?.... Is there a way to get rid of this eyesore?
Sent from my SGH-T989 using xda app-developers app
I'm not having any issues with ICS. You should only be getting that issue with JellyBean ROMS.
luperez said:
Am I the only one who consistenly experiences flickering with the latest nightlies AND stable release? Every time i pull up the keyboard or drag down the notification bar while on the settings menu or messaging or any other system app?.... Is there a way to get rid of this eyesore?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
YES!!! I've been saying this for awhile now lol. Don't know how to get rid of it. I've tried to flash with both trwp and cwm6 to no avail. Sad about it :'( my usual go to roms are cm9 and tdjs dark side v8. No more cm9 now.
Sent from my SGH-T989 using xda premium
See the funny thing is I dont have that issue with jellybean roms anymore... And this did NOT happen to me on previous cm 9 builds. This only started happening ever since I started flashing jellybean builds
Sent from my SGH-T989 using xda app-developers app
I sure do...and I'm running the latest nightly. Nothing seems to help it though.
Sent from my SAMSUNG-SGH-T989 using xda premium
luperez said:
See the funny thing is I dont have that issue with jellybean roms anymore... And this did NOT happen to me on previous cm 9 builds. This only started happening ever since I started flashing jellybean builds
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Weird..
Sent from my SGH-T989 using xda premium
I know you guys are looking for ways to eliminate flickering on cm9 but the cm10 flickering issue has many different solutions. I am quite sure they can be attempted on cm9 as well. First off though I think you guys should list what you have done to remedy the situation so people just don't inform you of what you already tried.
playya said:
I know you guys are looking for ways to eliminate flickering on cm9 but the cm10 flickering issue has many different solutions. I am quite sure they can be attempted on cm9 as well. First off though I think you guys should list what you have done to remedy the situation so people just don't inform you of what you already tried.
Click to expand...
Click to collapse
That's the thing.. its an issue with cm9 itself. I've tried disabling gpu rendering, flashing that useless gpu mod, fully wiping with both trwp and cwm6 touch.. not sure what else I can do.
Sent from my SGH-T989 using xda premium
RushAOZ said:
That's the thing.. its an issue with cm9 itself. I've tried disabling gpu rendering, flashing that useless gpu mod, fully wiping with both trwp and cwm6 touch.. not sure what else I can do.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
+1
Sent from my SGH-T989 using xda app-developers app
Interesting... I just flashed cm9 9-30 nightly last night and i don't experience this screen flickering, or at least i'm not noticing it if it's happening.
I'm using sk8's cwm6.0.1.4 and I just followed the instructions on TC's webpage. And I just came from erick's cm10 9-28 nightly. Don't know if this'll help, but that's what I did and I don't see any screen flickering. What's the best way to reproduce this issue? I can try and report back if I see it or not.
freedom_xda said:
Interesting... I just flashed cm9 9-30 nightly last night and i don't experience this screen flickering, or at least i'm not noticing it if it's happening.
I'm using sk8's cwm6.0.1.4 and I just followed the instructions on TC's webpage. And I just came from erick's cm10 9-28 nightly. Don't know if this'll help, but that's what I did and I don't see any screen flickering. What's the best way to reproduce this issue? I can try and report back if I see it or not.
Click to expand...
Click to collapse
Go into your settings, pull your notifications down half way then swipe them back up. The screen should flicker black.
Sent from my SGH-T989 using xda premium
RushAOZ said:
Go into your settings, pull your notifications down half way then swipe them back up. The screen should flicker black.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Yup, I'm also seeing a small flicker as well. I couldn't get it reproduced every time, but if I played around with the notification pull down about half way and then swiped them back up, the screen does flicker black.
Is it only from settings that you see this? I tried from my home screen, and I didn't see any flicker.
EDIT: If I go only 1/3 of 1/4 of the way with the pull down in Settings, I can reproduce the flicker every time I believe.
freedom_xda said:
Yup, I'm also seeing a small flicker as well. I couldn't get it reproduced every time, but if I played around with the notification pull down about half way and then swiped them back up, the screen does flicker black.
Is it only from settings that you see this? I tried from my home screen, and I didn't see any flicker.
EDIT: If I go only 1/3 of 1/4 of the way with the pull down in Settings, I can reproduce the flicker every time I believe.
Click to expand...
Click to collapse
It happens in all apps except the homescreen. For me, it does not matter if you pull it 1/3 or 1/4 or 1/2 or all the way down... the chance of it flickering when you drag it back up is about 20%
edit: I have the 9/30/12 nightly build installed. The flickering is not an issue for me and I use this ROM as my daily driver.
Same here. it appears randomly for me. i see no trend. also at times my data stays on E. but overall i love it.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I'm going to flash the 9/30 nightly with trwp and see what happen. I'm going to try to flash without installing gapps to see if that has any effect.
Sent from my SGH-T989 using xda premium
post deleted
Im using CM 9.1 stable and I'm not experiencing the issues that you guys are stating. I've already tried several times to replicate the issue.
Sent from my SAMSUNG-SGH-T989 using xda premium
josh8901 said:
Im using CM 9.1 stable and I'm not experiencing the issues that you guys are stating. I've already tried several times to replicate the issue.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
What from were you on previously? I'm starting to think remnants from the last rom are causing it.
Sent from my SGH-T989 using xda premium
post deleted
Try adjusting the build.prop entry below:
debug.mdpcomp.maxlayer=3
change it to ->
debug.mdpcomp.maxlayer=1
....this might or might not fix the flickering issue.
Sent from my AOKP'd T989
I'm using CM10 on my GSM device for almost two weeks and some times on the lock screen touchscreen become unresponsive and I can not slide the circle. I've been experiencing this problem once or twice a day. Is there a solution to that? as far as i researched this is not a known issue.
Take a logcat with catlog and send it to the dev, as we can't know the cause just from that. It happened to me just once I think
Sent from my One V using xda app-developers app
The dev discontinued the Rom. I'm also running cm 10 and sometimes get that problem. I suggest you switch roms or if you get that problem again just restart your phone
Sent from my One V using xda premium
gutrea said:
I'm using CM10 on my GSM device for almost two weeks and some times on the lock screen touchscreen become unresponsive and I can not slide the circle. I've been experiencing this problem once or twice a day. Is there a solution to that? as far as i researched this is not a known issue.
Click to expand...
Click to collapse
Uncheck 'Screen-Off Animation' from the settings, if it selected, reboot and problem will go away...
jolas said:
Uncheck 'Screen-Off Animation' from the settings, if it selected, reboot and problem will go away...
Click to expand...
Click to collapse
ty for your response but it's already unchecked.
In the heritage of CyanogenMod discussion threads, here is a new one for the release of the 10.2 nightlies. Nightlies started on 8/26/13 (my b-day thanks aremcee). 10.2 will bring you up to Android 4.3 Jellybean.
If you are on 10 or 10.1, go to Settings > About phone > CyanogenMod updates, and change your update type to Nightly. Download, install, enjoy.
If you use Google Apps you must flash newer gapps. After CM update download the latest gapps here: http://goo.im/gapps. Currently the 10.2/4.3 package is 20130813. Reboot into recovery and flash the gapps zip.
Not on CyanogenMod? I recommend wiping everything and installing:
Download CM: http://get.cm/?device=p930
Download Google Apps: http://goo.im/gapps
Change Log: http://10.2.cmxlog.com/?device=p930
I updated to 10.2 yesterday. Seems to be really smooth and generous on the battery. Obviously this is not a formal test. I'm not on WIND kernel anymore so I don't think my idle battery use is nearly as good. I hope he releases a 10.2 version soon.
Those of you having issues with no mobile signal from 8/27 on flash the baseband/firmware from here:
http://forum.xda-developers.com/showthread.php?t=1842763
That will fix it.
Sent from my LG-P930 using xda app-developers app
trying 8/30 nightly apn's are working. Looks pretty good so far, will have to leave it on the phone for a day and see how things progress.
Is there a way to partially flash Gapps or is best to put them all on regardless of whether I use them?
Just flashed this . only thing is I notice while opening an app or going from an app to home screen . I get lg logo appear then disappear . and in about phone last box lisnux I think it was I kept tapping it and my phone froze lol. Other than that I love it can't wait for wind kernel
Sent from my LG-P930 using xda app-developers app
ShadowOf said:
Is there a way to partially flash Gapps or is best to put them all on regardless of whether I use them?
Click to expand...
Click to collapse
You can open the zip with 7zip and remove the applications you don't want, then flash gapps zip.
nizmoboy98 said:
Just flashed this . only thing is I notice while opening an app or going from an app to home screen . I get lg logo appear then disappear
Click to expand...
Click to collapse
I've noticed the same thing.
Can anyone verify that their GPS is working properly?
Have a question can u send videos in mms
Sent from my LG-P930 using xda premium
I used GPS yesterday for work . used for about 2hrs no problems
Sent from my LG-P930 using xda app-developers app
Namuna said:
Can anyone verify that their GPS is working properly?
Click to expand...
Click to collapse
I am having horrible issues with Google maps and cm10.2. After install and I run for the first time every thing works (as long as I am on WiFi). As soon as I go to run it the second time and go to navigation I have the following issues:
1. The recent location, home & work, & history/starred cards will flash for a second then disappear.
2. When I have the above state it takes 5 - 10 min to achieve GPS lock, then I loose it about every 5 min.
3. The green ribbon at the top no longer has the street name, just an arrow and the number of mile on the left and the letter mi on the right. Correct orientation should have the arrow, miles & mi on the left with the current road on the right, and then when you approach the turn the banner should get larger with the street larger in the middle of the banner.
4. If I uninstall and reinstall, I can get it to work the first time and as soon as I exit and go back into the app its back to being messed up again. Clearing data, cache & rebooting have no impact.
Can this be repeated by anyone else?
I do not have this issue with stock, cm10.x, miui, or any other ROM I have tried except cm10.2 4.3.
Sent from my LG-P930 using xda app-developers app
Post deleted.
Namuna said:
Can anyone verify that their GPS is working properly?
Click to expand...
Click to collapse
I used Zombies, Run! this morning. Seemed to work fine.
Found battery life was horrible for the 8.30 flash, phone never went into deep sleep. However just flashed the 9.1 and phone did go into deep sleep now.
Nz
Heh, too bad I wasn't around to make one this time.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
rani9990 said:
Heh, too bad I wasn't around to make one this time.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Good seeing you again.
Any try Google maps yet? I am trying to see if my problem is repeatable.
Sent from my LG-P930 using xda app-developers app
I tried nightly 9.01 but had some random freezes resulting in battery pull. I'm on 9.02 hopefully this one is better
Sent from my LG-P930 using xda app-developers app
Hi all... I am hoping that some help/advice can be given. My issue is that barcode scanner apps, barcode scanner and barcode scanner + both cause the ui to become unresponsive. Phone calls cannot be answered though ringing can be heard etc and phone has to be rebooted. Has anyone experienced the same?
Sent from my LG-P930 using Tapatalk 4
After a day of using 10.2 latest nightly a lot of freezes and screen unresponsive. And I have ballistic HD case which is a ***** to take off every time I need to battery pull . going back to rock stable ICS ROM till they iron out the bugs
Sent from my LG-P930 using xda app-developers app