Related
General discussion about ICS Sense 4
hey superdioz, what are the first few words of line 245 please?
Unable to install
Hi Shaky,
I tried the version 0.3 on CM7/r2 hboot, but unable to install the rom. I got following error
AROMA INSTALLER version 2.00
(c) 2012 by amarullz xda-developers
ROM Name : ICS Sense 4.0
ROM Version : Alpha 0.3
ROM Author : Shaky156
Device : Not Defined
Start at : Tue May 22 07:55:13 2012
line 216 col 19: syntax error, unexpected STRING
1 parse errors
Installer Error (Status 6)
End at : Tue May 22 08:02:49 2012
Hi Shaky it might be wise to add info & links to these new threads in the 1st post of the Dev thread!
pairofpints said:
hey superdioz, what are the first few words of line 245 please?
Click to expand...
Click to collapse
"aGPS patch","",0
superdioz said:
"aGPS patch","",0
Click to expand...
Click to collapse
superdioz you were right.
I could not answer you in the other thread,
thanks!
The latest one i dropped people were still complaining, so im doing all tests myself. As i can get accurate reports/information
Once all tests are done, then itll be release with maybe some other things
Sent from my HTC Desire HD
Omg v0.3 feels much faster, confirmed hboot fatsys working fine
Sent from my HTC Desire HD
superdioz said:
"aGPS patch","",0
Click to expand...
Click to collapse
cheers ears!
I can't get any of these to install. Does the phone need to be completely empty for this installation? Cos i've done full wipe, but got a load of stuff on my card still.
E:Can't open /sdcard/ICS-Sense4.0-v0.3.zip
(bad)
Installation aborted.
When I delete the comma at the end of line 245, aroma installer shows me an error in line 10 -.-
"aGPS patch","",0
That was just a bad compressed ROM in general, must have had an error during compressing or something like that, I get that sometimes when transfering from pc to sdcard, comes up as failed even though its correct
should i just wait for the next drop Shakes?
eagerly waiting for your tested ROM for CM7r2
Sent from my HTC Desire using xda premium
pairofpints said:
should i just wait for the next drop Shakes?
Click to expand...
Click to collapse
It's best to wait, as I'm doing my extensive testing
Noob question: I'm on CM7r2 Hboot but I want to change to stock. When I flash the stock pb99.img I still remain on cm7r2. Is there anyway to override the read only hboot?
topgeardave said:
Noob question: I'm on CM7r2 Hboot but I want to change to stock. When I flash the stock pb99.img I still remain on cm7r2. Is there anyway to override the read only hboot?
Click to expand...
Click to collapse
Go to google
Type in hboot desire
Click on alpha rev site
Download the hboot you would like in (img) format, flash via fastboot
The instructions are on that site, reboot bootloader then check, it should be gone
Sent from my HTC Desire HD
Torrent
Hi,
since the download mirrors are pretty slow and uncomfortable (Already had 2 disconnects -,-) i would prefer if current rom versions could be shared by torrent. As soon as I get the rom downloaded, i will create and share one. If anyone else already has the rom file and could create a torrent file it would be also great.
Thanks, Soeren
-delete
Do not download the rom, it has errors, its being fixed right now
Sent from my HTC Desire HD
hi Guyz
Noob question I think…
Guyz the name of the rom when I donwnload is testev1 but the name of title say's alfa 0.3 they are the same version ( new rom ) right? :S
Hi,
-I want to root my device, so what's the safest way to root it ?
(explain the method here or give me links!)
-and what Rom do u prefer to use in my phone after rooting it ?
(custom rom or stock rom, but all features most work perfectly and the phone should work smooth)
I am running ICS 4.0.3 and My phone is Middle East version & it's important that the rom that I will put in my device fully support (Arabic language) like the original one does!
See attachment to know all the info of my phone
http://forum.xda-developers.com/showthread.php?t=1601038
Follow this thread and download the zip file, read the on screen instructions and just run the .bat file and you'll have root..
And for the rom, try Arconium ICS or Mooded ICS.. They both support Arabic languages!
Sent from my LT15i using XDA
Thanks alot gire.prasad for your helpful reply
my phone now rooted successfully!
I am thinking in staying with the orginal stock software (the original SE ICS 4.0.3)
So now I just rooted the device, and I will try to free up the internal memory
note: I was facing some application hanging when I try to use them before rooting the device like :
-Phone
_Contacts
-Xperia Gallery
-Messaging
So will freeing up internal memory space solve this hanging problem ?
Thanks!
Glad you got root!
It wont.. The apps freezing is due to Stock ICS and freeing up internal memory simply doesn't help it.. Tweaking should help a bit or try different rom.. If you prefer stock rom, then try supercharging the rom using V6 SuperCharger script and using that script try to bulletproof those apps you mentioned! It'll help a lot and make the rom even more smoother and faster..
Need some help for doing it?
Sent from my LT15i using XDA
Thanks mate,
But Help Help Help!
My phone got a problem now!
after I rooted the phone everything went normally but after I moved junk Apps
from this thread http://forum.xda-developers.com/showthread.php?t=1326120
my phone won't start again, it hangs at xperia logo (I keep hearing that new sms messages are coming ) but the phone still hangs on xperia logo
what to do ?
I fixed the hangs on xperia logo problem (thanks God)
mhs007 said:
Thanks mate,
But Help Help Help!
My phone got a problem now!
after I rooted the phone everything went normally but after I moved junk Apps
from this thread http://forum.xda-developers.com/showthread.php?t=1326120
my phone won't start again, it hangs at xperia logo (I keep hearing that new sms messages are coming ) but the phone still hangs on xperia logo
what to do ?
Click to expand...
Click to collapse
You should be aware coz the apps mentioned were oly for GB roms!
But you're in ICS!
Edit : Glad you made it
Sent from my LT15i using XDA
Hi guys..thanks for doin all this & creating a forum where novices can do a lot !!
Iv rooted & flahsed CM10 on my Wildfire S in India but im continuously facing problems on CM10 as follows :
1) I cant Sync my contacts with FB or Google / Whatsapp
2) Camera doesnt works properly
3) Data Network ceases ; i have to reboot a lot of times to restart data so that my email , FB , Whatsapp runs & Syncs ad the ni get all delayed emails etc etc
4) Biggest thing why i did al these things was to increase internal memory so i can have as many as applications i WANT. But this only upgrades the system and not the internal memory. Even after using Link2SD & apps2SD application files are still on internal memory which sucks.
ALL EFFORTS WASTED.
How can i go back / degrade to HTC Sense / version 2.3.5 or something really working completely for Wildfires S.
Piyush Verma said:
Hi guys..thanks for doin all this & creating a forum where novices can do a lot !!
Iv rooted & flahsed CM10 on my Wildfire S in India but im continuously facing problems on CM10 as follows :
1) I cant Sync my contacts with FB or Google / Whatsapp
2) Camera doesnt works properly
3) Data Network ceases ; i have to reboot a lot of times to restart data so that my email , FB , Whatsapp runs & Syncs ad the ni get all delayed emails etc etc
4) Biggest thing why i did al these things was to increase internal memory so i can have as many as applications i WANT. But this only upgrades the system and not the internal memory. Even after using Link2SD & apps2SD application files are still on internal memory which sucks.
ALL EFFORTS WASTED.
How can i go back / degrade to HTC Sense / version 2.3.5 or something really working completely for Wildfires S.
Click to expand...
Click to collapse
Which Version CM10 did you have ? is it Ben CM10 , Modpunk CM10 or Dudeman1996 CM10 ? I think you still new here :highfive:
TRuth14 said:
Which Version CM10 did you have ? is it Ben CM10 , Modpunk CM10 or Dudeman1996 CM10 ? I think you still new here :highfive:
Click to expand...
Click to collapse
Ben's CM10 data network works fine for me. Camera still buggy.
I
Piyush Verma said:
Hi guys..thanks for doin all this & creating a forum where novices can do a lot !!
Iv rooted & flahsed CM10 on my Wildfire S in India but im continuously facing problems on CM10 as follows :
1) I cant Sync my contacts with FB or Google / Whatsapp
2) Camera doesnt works properly
3) Data Network ceases ; i have to reboot a lot of times to restart data so that my email , FB , Whatsapp runs & Syncs ad the ni get all delayed emails etc etc
4) Biggest thing why i did al these things was to increase internal memory so i can have as many as applications i WANT. But this only upgrades the system and not the internal memory. Even after using Link2SD & apps2SD application files are still on internal memory which sucks.
ALL EFFORTS WASTED.
How can i go back / degrade to HTC Sense / version 2.3.5 or something really working completely for Wildfires S.
Click to expand...
Click to collapse
Dude..
Do a fresh install and flash data2sd zip to increase your internal memory...
i am using ben's cm10 and contacts sync for me.. so if u r using d same them u did something wrong....
Reflash with complete wipe..
Flash gapps...
Flash data2sd zip...(ext4 partition only..)
And that shud solve ur prob and put u back in business...
Sent from my Wildfire S using xda app-developers app
the.h.t.c.king said:
I
Dude..
Do a fresh install and flash data2sd zip to increase your internal memory...
i am using ben's cm10 and contacts sync for me.. so if u r using d same them u did something wrong....
Reflash with complete wipe..
Flash gapps...
Flash data2sd zip...(ext4 partition only..)
And that shud solve ur prob and put u back in business...
Sent from my Wildfire S using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply... I have used " cm-10.0.0-RC0-CRYPTOMILK-ALPHA1-marvel " and installed Link2SD after installing " gapps-jb-20120726-lite-rebased " . But after installing some applications now again my internal memory is only 26MB remaining. I am facing problems with Data network connectivity = my emails , whatsapp , FB n other Sync apoplications Google Contacts Sync also doesnt work properly. AND when i get call my screen is BLANK = BLACK. i need to open the screen lock 2 - 3 times then i can see the SCREEN...but this happen occasionally...
Please give me a link if u can to download Ben's CM10...AND does this vary for region to region im in India , Asia using Vodafone Network GSM network.
Guys please help....
TRuth14 said:
Which Version CM10 did you have ? is it Ben CM10 , Modpunk CM10 or Dudeman1996 CM10 ? I think you still new here :highfive:[/QUOT
I have used " cm-10.0.0-RC0-CRYPTOMILK-ALPHA1-marvel " and installed Link2SD after installing " gapps-jb-20120726-lite-rebased " . But after installing some applications now again my internal memory is only 26MB remaining. I am facing problems with Data network connectivity = my emails , whatsapp , FB n other Sync apoplications Google Contacts Sync also doesnt work properly. AND when i get call my screen is BLANK = BLACK. i need to open the screen lock 2 - 3 times then i can see the SCREEN...but this happen occasionally...
Please give me a link if u can to download Ben's CM10...AND does this vary for region to region im in India , Asia using Vodafone Network GSM network.
Guys please help....
Click to expand...
Click to collapse
Piyush Verma said:
Thanks for the reply... I have used " cm-10.0.0-RC0-CRYPTOMILK-ALPHA1-marvel " and installed Link2SD after installing " gapps-jb-20120726-lite-rebased " . But after installing some applications now again my internal memory is only 26MB remaining. I am facing problems with Data network connectivity = my emails , whatsapp , FB n other Sync apoplications Google Contacts Sync also doesnt work properly. AND when i get call my screen is BLANK = BLACK. i need to open the screen lock 2 - 3 times then i can see the SCREEN...but this happen occasionally...
Please give me a link if u can to download Ben's CM10...AND does this vary for region to region im in India , Asia using Vodafone Network GSM network.
Guys please help....
Click to expand...
Click to collapse
FB sync? Here you go http://forum.xda-developers.com/showthread.php?p=32120790
Sent from MARVEL JellyScream
Piyush Verma said:
TRuth14 said:
Which Version CM10 did you have ? is it Ben CM10 , Modpunk CM10 or Dudeman1996 CM10 ? I think you still new here :highfive:[/QUOT
I have used " cm-10.0.0-RC0-CRYPTOMILK-ALPHA1-marvel " and installed Link2SD after installing " gapps-jb-20120726-lite-rebased " . But after installing some applications now again my internal memory is only 26MB remaining. I am facing problems with Data network connectivity = my emails , whatsapp , FB n other Sync apoplications Google Contacts Sync also doesnt work properly. AND when i get call my screen is BLANK = BLACK. i need to open the screen lock 2 - 3 times then i can see the SCREEN...but this happen occasionally...
Please give me a link if u can to download Ben's CM10...AND does this vary for region to region im in India , Asia using Vodafone Network GSM network.
Guys please help....
Click to expand...
Click to collapse
I am from india too...
Bens work is in the first page of the development thread... and everything works fine for me... use data2sd.. use cwm recovery only, its best for flashing roms and data2sd scripts...
Sent from my Wildfire S using xda app-developers app
Click to expand...
Click to collapse
the.h.t.c.king said:
Piyush Verma said:
I am from india too...
Bens work is in the first page of the development thread... and everything works fine for me... use data2sd.. use cwm recovery only, its best for flashing roms and data2sd scripts...
Sent from my Wildfire S using xda app-developers app
Click to expand...
Click to collapse
I have used CWM recovery only to install CM10 via this link....but worried about the Data2SD app....the reveiws abt this app frightened me....i had also made my device not working by installing S2E app, after which the device wasnt booting at ALL....the nhad to re do all to get it going...any ways to increase the internal memory or permanenetly link it to SD card so all apps can be transfeerred completely to SD card and not just linking it to SD via Link2SD...
Click to expand...
Click to collapse
Piyush Verma said:
the.h.t.c.king said:
I have used CWM recovery only to install CM10 via this link....but worried about the Data2SD app....the reveiws abt this app frightened me....i had also made my device not working by installing S2E app, after which the device wasnt booting at ALL....the nhad to re do all to get it going...any ways to increase the internal memory or permanenetly link it to SD card so all apps can be transfeerred completely to SD card and not just linking it to SD via Link2SD...
Click to expand...
Click to collapse
Its ur wish....
But...
I have total 100 apps..
75 system..
25 other..
348 mb used..
646 mb free...
Sent from my Wildfire S using xda app-developers app
Click to expand...
Click to collapse
the.h.t.c.king said:
Piyush Verma said:
Its ur wish....
But...
I have total 100 apps..
75 system..
25 other..
348 mb used..
646 mb free...
Sent from my Wildfire S using xda app-developers app
Click to expand...
Click to collapse
bro which handset ru using ?? i have HTC wildfire S having only 150 MB of internal memory....
i have aboyut 63 System Apps and only 13 Aps like FB , evernote , maps etc...but my free memory is only 23 MB...not Facebook contacts are synced to avoid excess memory use on FB....how come u have 1GB memory on internal on wildfire S ??
have i done mistakes in installing CM10 on my phone ?? i have to always disable & the nenable data because im not able to use net on real time. It disconects in between a lot of times...
Please help & suggest me the procedure to do it again ...
Click to expand...
Click to collapse
Piyush Verma said:
the.h.t.c.king said:
bro which handset ru using ?? i have HTC wildfire S having only 150 MB of internal memory....
i have aboyut 63 System Apps and only 13 Aps like FB , evernote , maps etc...but my free memory is only 23 MB...not Facebook contacts are synced to avoid excess memory use on FB....how come u have 1GB memory on internal on wildfire S ??
have i done mistakes in installing CM10 on my phone ?? i have to always disable & the nenable data because im not able to use net on real time. It disconects in between a lot of times...
Please help & suggest me the procedure to do it again ...
Click to expand...
Click to collapse
Htc wildfire s only bro....
I am running data2sd script after partitioning sd card to 1gb...
I use benjamingwyn's cm10 version...
And there is no network prob for me...
Regards,
Aditya
Sent from my Wildfire S using xda premium
Click to expand...
Click to collapse
the.h.t.c.king said:
Piyush Verma said:
Htc wildfire s only bro....
I am running data2sd script after partitioning sd card to 1gb...
I use benjamingwyn's cm10 version...
And there is no network prob for me...
Regards,
Aditya
Sent from my Wildfire S using xda premium
Click to expand...
Click to collapse
Hi Aditya,
Root # All Data2SD card is this the APP ? coz when i search for Data2Sd on Google play store it showed up "Root # All Data2SD card " only.
I just wanted to confirm if i can delete all apps and then install Data2SD. After this i wud reinstall all apps all over again. I just do not want to flash the CM10 all over again completely. Will this work ???
Please revert ....
Click to expand...
Click to collapse
Piyush Verma said:
the.h.t.c.king said:
Hi Aditya,
Root # All Data2SD card is this the APP ? coz when i search for Data2Sd on Google play store it showed up "Root # All Data2SD card " only.
I just wanted to confirm if i can delete all apps and then install Data2SD. After this i wud reinstall all apps all over again. I just do not want to flash the CM10 all over again completely. Will this work ???
Please revert ....
Click to expand...
Click to collapse
Data2sd is a script and not a app...
Plz don't install anything from the playstore... its better u check out the forums of xda instead. Search for cronmod int2ext+ signed...
Its a flashable zip which u have to flash after installing a fresh copy of ur rom...
"Life without my phone is like life without breathing... I am addicted to my htc...."
Click to expand...
Click to collapse
the.h.t.c.king said:
Piyush Verma said:
Data2sd is a script and not a app...
Plz don't install anything from the playstore... its better u check out the forums of xda instead. Search for cronmod int2ext+ signed...
Its a flashable zip which u have to flash after installing a fresh copy of ur rom...
"Life without my phone is like life without breathing... I am addicted to my htc...."
Click to expand...
Click to collapse
hey...iv got the link for int2ext+ ...how to know it is signed or no ??
and please give me Bens CM10 LINK to flash new rom .....im getting heelllll lot of problems with the internet connection.. it doesnt work i have to disable & enable internet connection / mobile internet always when i have to view new email = NEW WHats app Messages = new FB notifications = anything....
how to fix this ??? PLease help im bugged with his and want to go back to old version 2.3.5 becasue of all this....but i do not want to do that..
PLEASE GUIDE & HELP>>>>
Click to expand...
Click to collapse
plus one for the mobile data, been using cm10 which ih8ra!n mod, and having internet problem..
Since cm10 from seem to be having positive respond, will try it later on..
on the other hand, try cronmod int2ext+ for internal storage, partition your micro sd card first..
I use Ben's CM10 and data transfer works great for me.
Only camera preview is still buggy but it is usable rom now.
Piyush Verma said:
the.h.t.c.king said:
hey...iv got the link for int2ext+ ...how to know it is signed or no ??
and please give me Bens CM10 LINK to flash new rom .....im getting heelllll lot of problems with the internet connection.. it doesnt work i have to disable & enable internet connection / mobile internet always when i have to view new email = NEW WHats app Messages = new FB notifications = anything....
how to fix this ??? PLease help im bugged with his and want to go back to old version 2.3.5 becasue of all this....but i do not want to do that..
PLEASE GUIDE & HELP>>>>
Click to expand...
Click to collapse
dude in my opinion if you want a rom for daily stable use cm10 is definitely not a choice now...for cm10,cm9 use int2ext+... it is faster than data2sd... (http://d-h.st/1vK) this is signed version....
http://forum.xda-developers.com/showthread.php?t=1987671
the above is a cm10 mod by iH8ra!n... i checked it... camera is not fully supported, and little laggy in scrolling... but no internet problems as like you said... so i think it will be suitable for you... int2ext4+ is supported by that rom... download links for everything is given in the post... try it....
Click to expand...
Click to collapse
Hi people,
I've recently installed CM10 Nightlies and when I'm receiving calls my screen won't come up 'till I press Power button.
Does anyone have solution ?
Thx.
Greetings from Bosnia
abuba said:
Hi people,
I've recently installed CM10 Nightlies and when I'm receiving calls my screen won't come up 'till I press Power button.
Does anyone have solution ?
Thx.
Greetings from Bosnia
Click to expand...
Click to collapse
hey im also geeting the same problem sometimes....have u found out any details ???
Hi!
Rom based on TeamHackLG & CM sources.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* REMEMBER! INSIDE YOU GET OC KERNEL - NO LOGCAT, NO SUPPORT!!
*/
What working? All without radio-FM (I work about).
Added:
OC max 1228
406 Mb RAM free
available IOSCHED: fiops, cfq, bfq
available FREQ_GOV: performance, powersave, smartass2, smartassh3
(I remove other)
Removed apps:
VideoEditor
Note : CM-10.2 is only for jellybean (v20) baseband. If you are on ics (v10) baseband flash v20 baseband from this thread
Format everything other then Sd card (Full format is must needed when you flash cm10.2 1st time)
Flash the CM10.2 zip
Code:
Reboot
boot into recovery mode
Install gapps
Reboot
Upgrading from earlier version of CyanogenMod 10.2:
Code:
Boot into Recovery
Wipe cache and dalvik cache
Flash new CM10.2 zip
Reboot
PLEASE DON'T MIRROR MY DOWNLOAD LINKS
REMEMBER: SELECT CORRECT VERSION - IF YOU HAVE P705, SELECT P705 BUILD!
DOWNLOAD
SCREENSHOTS:
sources:
https://github.com/CyanogenMod/
https://github.com/TeamHackLG
https://github.com/androidarmv6
https://github.com/xplodwild
If you like this image, Give me beer
regards
cr3pt
Kernels 3.4.4, based on:
www.github.com/bart452
www.github.com/TeamHackLG
www.google.com/#q=kernel+msm7x27
You don't need this kernel for my rom - every time when I upload new version, latest kernel is inside.
LINK
You mean that videocam is working ?? That's amazing ! I try it in 10 minutes !
Sent from my LG-P700 using XDA Premium 4 mobile app
Yep - working
I have couple of problems with this ROM so maybe someone can help me:
1) when i want to delete some system app with Titanium backup it says " Failed to locate the apk file", nd it isnt that i m trying to delete already deleted app..
2) My usb debugging doesn't work, i select USB debugging in Developer option and root access to "Apps and ADB" and i cant work over adb with my phone.. I came from 4.2.2 and everything works there, so it isn't problem i n PC
3. After LG logo there is some sluggish screen, and after that CM logo popup
Any help?
miki89 said:
I have couple of problems with this ROM so maybe someone can help me:
1) when i want to delete some system app with Titanium backup it says " Failed to locate the apk file", nd it isnt that i m trying to delete already deleted app..
2) My usb debugging doesn't work, i select USB debugging in Developer option and root access to "Apps and ADB" and i cant work over adb with my phone.. I came from 4.2.2 and everything works there, so it isn't problem i n PC
3. After LG logo there is some sluggish screen, and after that CM logo popup
Any help?
Click to expand...
Click to collapse
Ad 1 - reboot fix all
Ad 2 - I don't have this error. After run adb logcat please reboot mobile and accept key.
Ad 3 - it's normal on CM10.2
Strange , but no sound in apollo. But in incall and message the sound is ok
harkis123 said:
Strange , but no sound in apollo. But in incall and message the sound is ok
Click to expand...
Click to collapse
I see that problem - Ron must update sources
regards
cr3pt
EDIT:
I don't have problem with this - you try to play mp3 44100 / 128kbit?
What is the difference between tubo's and yours?
Sent from my LG-P700 using xda app-developers app
caiejay said:
What is the difference between tubo's and yours?
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
You can look in first post
cr3pt said:
I see that problem - Ron must update sources
regards
cr3pt
EDIT:
I don't have problem with this - you try to play mp3 44100 / 128kbit?
Click to expand...
Click to collapse
128kbit and 320kbit
Installed "Google Play" Music app . The sound is working on both , the Apollo and Google Play
About the rom after hour off using it became my favorite Only one thing that I missed is Battery Percentage and ( when you hold home buttons and the apps are showed up ) the Used Ram and Free Ram bar But yep , the stock will be stock.
cr3pt said:
Ad 1 - reboot fix all
Ad 2 - I don't have this error. After run adb logcat please reboot mobile and accept key.
Ad 3 - it's normal on CM10.2
Click to expand...
Click to collapse
I restarted phone 6 times and it didnt help for problem no.1, I need phone so i restore nand and i didnt try adb logcat..
miki89 said:
I restarted phone 6 times and it didnt help for problem no.1, I need phone so i restore nand and i didnt try adb logcat..
Click to expand...
Click to collapse
It is a known bug that titanium backup isn't properly working on android 4.3, nothing device related
Sent from my LG-P700 using xda app-developers app
What working? All without radio-FM (I work about)????????
-Wifi tethering work?
-Video Calls works? (Hangouts,Tango...etc).
THANKS...
Wi-Fi tethering work correct
I dont use video call but you can check
Wysłane z mojego LG-P700 przy użyciu Tapatalk 4
cr3pt said:
Wi-Fi tethering work correct
I dont use video call but you can check
Wysłane z mojego LG-P700 przy użyciu Tapatalk 4
Click to expand...
Click to collapse
Can you makes a separate flashable zip for kernel, both the nfc and non-nfc (P705). It would be great, so that other rom can use it.
from LG-P705G w/ Vanir Rom Weeklies
I can make but from latest version audio is moved to bootloader - that can be a problem
Wysłane z mojego LG-P700 przy użyciu Tapatalk 4
cr3pt said:
I can make but from latest version audio is moved to bootloader - that can be a problem
Wysłane z mojego LG-P700 przy użyciu Tapatalk 4
Click to expand...
Click to collapse
Aw Ok, i thinki just wait for Bart to create a new one. Thanks.
from LG-P705G w/ Vanir Rom Weeklies
Somebody teaste voip works?!
Sent from my LG-P700 using xda app-developers app
miki89 said:
I restarted phone 6 times and it didnt help for problem no.1, I need phone so i restore nand and i didnt try adb logcat..
Click to expand...
Click to collapse
Do not restore your 4.2.2 data to 4.3 ROM. You will have a problem with it.
You should start with a clean sheets
Sent from my Lenovo K900_ROW using Tapatalk 2
Hi,
I have some problems with 2 applications since I flash my phone on CyanogenMod 10.2 for the Samsung Galaxy Ace 2 build 26/11 :
MightyText(id=com.texty.sms) crash on phone as soon as I try to send a SMS from my web browser
The widget of Meteo France(id=fr.meteo) never load weather information. However the application itself is working well.
The weather app, I will just find an other one, but for MightText I am more disappointed. Is somebody faced the same problem and have a solution to fix it?
I already try to format cache & Dalvik, remove apps informations, and uninstall/install them but it was not better.
Thanks in advance.
build.board: montblanc
build.bootloader: unknown
build.brand: samsung
build.cpu_abi: armeabi-v7a
build.cpu_abi2: armeabi
build.device: GT-I8160
build.display: cm_codina-userdebug 4.3.1 JLS36I a45ae4e358 test-keys
build.fingerprint: samsung/cm_codina/codina:4.3.1/JLS36I/a45ae4e358:userdebug/test-keys
build.hardware: samsungcodina
build.host: teamcanjica
build.id: JLS36I
build.manufacturer: samsung
build.model: GT-I8160
build.product: GT-I8160
build.radio: unknown
build.serial: 47901eeb6efe3020
build.tags: test-keys
build.time: 1385477293000
build.type: userdebug
build.user: jenkins
version.codename: REL
version.incremental: a45ae4e358
version.release: 4.3.1
version.sdk_int: 18
1. Post some logcat
2. Weather app is maybe loading location, but because gps is weak it cant load. Go outside with turned on GPS and wait 2 minutes. Or try to find sth like "custom location" and enter your city name in that box.
Sent from my GT-I8160
Rox said:
1. Post some logcat
2. Weather app is maybe loading location, but because gps is weak it cant load. Go outside with turned on GPS and wait 2 minutes. Or try to find sth like "custom location" and enter your city name in that box.
Sent from my GT-I8160
Click to expand...
Click to collapse
Hi Rox,
I didn't expect an answer from the expert himself. I will so take the opportunity to thank you personally for the great work you did on the Custom ROM. It's my first install of Custom and I don't regret my attempt. Just one question : I have a GT-I8160P (with NFC) model and I am suprised to see that all CM ROM I saw are not compatible with NFC. Is it a CM limitation or bug?
For the application 1, MightyText behavior came back to normal without any action no reboot and unfortunatly I didn't took logcat. I will try to think about it if the problem comes back.
For the application 2, the problem is still there. You will find enclosed some logcat. During the log I did :
Drag & Drop the MeteoFrance widget on the screen
Click on it to add a city (the application start)
Went to page where I can configure the widget behavior
Look for and select my city (no GPS needed), add it as favorite and choose it for widget
Back to home screen (the widget is still displaying "add a city to Favorite")
I did approximately the same thing a second time to be sure the problem was logged.
Anyway, except if it can solve a build in your ROM don't spend so much time with this issue. I will look for an other weather application.
MigthyText app is crashing again each time I send an SMS from my Web browser. It's strange because it worked all over the day.
Please find enclosed the corresponding logcat.
EDIT: @Rox : On totally other topic but I can't yet post on your thread, I can probably confirm that point :
nikolas1274 said:
Rox is there a possibility, that the problem is relative to the base rom we use to instal the CM, a friend has intsall CM over MF1 (eur) and the toggle is woking.
Click to expand...
Click to collapse
I installed your ROM on top of OF I8160PXXMF1(France) and I don't have any problem with 2g/3g toggle.
snyfear said:
MigthyText app is crashing again each time I send an SMS from my Web browser. It's strange because it worked all over the day.
Please find enclosed the corresponding logcat.
EDIT: @Rox : On totally other topic but I can't yet post on your thread, I can probably confirm that point :
I installed your ROM on top of OF I8160PXXMF1(France) and I don't have any problem with 2g/3g toggle.
Click to expand...
Click to collapse
This morning, MigthyText is working like a charm... This bug is very strange, at least since time I have log of the issue but couldn't understand them...
snyfear said:
EDIT: @Rox : On totally other topic but I can't yet post on your thread, I can probably confirm that point :
I installed your ROM on top of OF I8160PXXMF1(France) and I don't have any problem with 2g/3g toggle.
Click to expand...
Click to collapse
That's great!
I also like XXMF1.
As the mightytext problem still appearing from time to time, I tried to identify what was the problematic trigger.
That have to be from the text sent in the SMS by the web interface.
I first thought about special characters (I am french and we use plently of éàèï...) but that was not that. I tried without any of them and it crashed again on the phone.
The issue was in the lenght of the message. As soon as I try to send message containing more than 160 characters from the web interface, the mightytext app crashes.
When I copy paste the same message in the CM messaging apps directly, the message is correctly sent 'as multipart'.
MigthyText multiple part SMSs sent from Official MF1 was working before so the way multipart is handle by CM10.2 should be different and MightyText don't appreciate it.
An idea how I can fix this?
Hey, I am running CM10.2 and MightyText on my Samsung Galaxy S3 and am having the same exact problem. When I send a text from Gmail (equipped with mightytext plugin) my phone MightyText app crashes. When I try to send a message from the mightytext website on my computer, the messages don't send through my phone. I do receive texts on mighty-text without any problems, meaning that the accounts are linked properly, but there is some communication problem between mightytext and my phone.
Anyone else having this problem? Any suggestions on how to fix it?
skim7x said:
Hey, I am running CM10.2 and MightyText on my Samsung Galaxy S3 and am having the same exact problem. When I send a text from Gmail (equipped with mightytext plugin) my phone MightyText app crashes. When I try to send a message from the mightytext website on my computer, the messages don't send through my phone. I do receive texts on mighty-text without any problems, meaning that the accounts are linked properly, but there is some communication problem between mightytext and my phone.
Anyone else having this problem? Any suggestions on how to fix it?
Click to expand...
Click to collapse
hai ..
I want to ask, why every restart always bootloop?
I've been 3 times to install this Rom-_-..
please help ... :crying:
Sorry My English Bad
zakiprasasti69 said:
hai ..
I want to ask, why every restart always bootloop?
I've been 3 times to install this Rom-_-..
please help ... :crying:
Sorry My English Bad
Click to expand...
Click to collapse
Did you reset correctly your phone before flashing the ROM?
Wipe data/factory reset (You will lose your configuration and application data so proceed before to all backup needed).
Wipe cash partition (no risk)
Wipe Dalvik cache (no risk)
And you cannot flash it from a too old base firmware like GingerBread. You first have to flash a more recent official firmware like MF1 or MG2.
snyfear said:
Did you reset correctly your phone before flashing the ROM?
Wipe data/factory reset (You will lose your configuration and application data so proceed before to all backup needed).
Wipe cash partition (no risk)
Wipe Dalvik cache (no risk)
And you cannot flash it from a too old base firmware like GingerBread. You first have to flash a more recent official firmware like MF1 or MG2.
Click to expand...
Click to collapse
now it goes well, it turns out I have to replace the Official Firmware, I now use XXMK2 and runs very well ..
thank you very much for your help .. :good:
sorry my bad english ..
Some roms, (like CM10.2 for galaxy ace) are sluggish and slow. I have tried many roms for the galaxy ace but nothing beats stock and cm7. Also boot looping can happen from slow sd cards (especially on cyanogenmod roms) Unfourtanatly I dont know the solution for your app.
One more thing, if you dont like bootloops, try more lighter and stable roms. I suggest you stick to ICS. eg: cm9.
Sent from my GT-S5830 using Tapatalk 2
snyfear said:
Did you reset correctly your phone before flashing the ROM?
Wipe data/factory reset (You will lose your configuration and application data so proceed before to all backup needed).
Wipe cash partition (no risk)
Wipe Dalvik cache (no risk)
And you cannot flash it from a too old base firmware like GingerBread. You first have to flash a more recent official firmware like MF1 or MG2.
Click to expand...
Click to collapse
2. There will be!!
You have to wait for god damn optimizing to complete.. especially if you are on ART lol XD
Sent from my GT-I8160 using Tapatalk
---------- Post added at 08:24 PM ---------- Previous post was at 08:22 PM ----------
TheUnknownThing said:
Some roms, (like CM10.2 for galaxy ace) are sluggish and slow. I have tried many roms for the galaxy ace but nothing beats stock and cm7. Also boot looping can happen from slow sd cards (especially on cyanogenmod roms) Unfourtanatly I dont know the solution for your app.
One more thing, if you dont like bootloops, try more lighter and stable roms. I suggest you stick to ICS. eg: cm9.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
What are you doin in ace 2 forums? Theres no 4.0.3/4 for ace 2...
Sent from my GT-I8160 using Tapatalk
teddytsen said:
2. There will be!!
You have to wait for god damn optimizing to complete.. especially if you are on ART lol XD
Sent from my GT-I8160 using Tapatalk
---------- Post added at 08:24 PM ---------- Previous post was at 08:22 PM ----------
What are you doin in ace 2 forums? Theres no 4.0.3/4 for ace 2...
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
I gave that as an example. Some apps don't work because of your rom version (since you use cm11) there are sure to be app compatibility issues.
TheUnknownThing said:
I gave that as an example. Some apps don't work because of your rom version (since you use cm11) there are sure to be app compatibility issues.
Click to expand...
Click to collapse
Like es, but now its fixed
Sent from my GT-I8160 using Tapatalk