Related
Hey guys been stressing for 3 days with my wife's phone. She got the ota to 4.3 and everything seemed fine
until she rebooted the phone. Now any sim i put in says unregistered sim and cant connect. Strange thing is it says there is new voice mail which to me means it is connecting to the network. I've reverted back to factory 4.11 and same problem. But it's still on 4.3 bootloader and Knox is tripped. And since there is no way to revert i317m bootloader like 317 i can't fully go back. I did the free sim unlock and wonder if that could be the problem with it reading the sim cards? Is it like a code unlock? She's freaking and I'm so stressed. Any way to test if phone is reading sim? I'm sure this is software related because it doesn't say no sim and tells me there is new voice mail.
Not sure it would help but I would try reapplying the 4.3 update via Odin. You can find the update on Sammobile.
ok so I did the update again but threw odin this time and still not working. but there is a difference, when I try to select my network from the list it site for a while and says unable to connect, try again later.
mike_kameka said:
Hey guys been stressing for 3 days with my wife's phone. She got the ota to 4.3 and everything seemed fine
until she rebooted the phone. Now any sim i put in says unregistered sim and cant connect. Strange thing is it says there is new voice mail which to me means it is connecting to the network. I've reverted back to factory 4.11 and same problem. But it's still on 4.3 bootloader and Knox is tripped. And since there is no way to revert i317m bootloader like 317 i can't fully go back. I did the free sim unlock and wonder if that could be the problem with it reading the sim cards? Is it like a code unlock? She's freaking and I'm so stressed. Any way to test if phone is reading sim? I'm sure this is software related because it doesn't say no sim and tells me there is new voice mail.
Click to expand...
Click to collapse
Try getting a new sim card.
Sent from my GT-N7105 using XDA Premium 4 mobile app
mike_kameka said:
ok so I did the update again but threw odin this time and still not working. but there is a difference, when I try to select my network from the list it site for a while and says unable to connect, try again later.
Click to expand...
Click to collapse
ok so ive run the service menu and gone to sim information, qmi uim status and I see a problem vs my note 2. under app_state illegal ? it states yes on her device. what does this mean?
mike_kameka said:
ok so ive run the service menu and gone to sim information, qmi uim status and I see a problem vs my note 2. under app_state illegal ? it states yes on her device. what does this mean?
Click to expand...
Click to collapse
Tried to flash other modems and it fails in Oden and phone says unsupported. I think Knox is stopping me from changing modem file. Anyone know how I can get passed Knox?
mike_kameka said:
Tried to flash other modems and it fails in Oden and phone says unsupported. I think Knox is stopping me from changing modem file. Anyone know how I can get passed Knox?
Click to expand...
Click to collapse
Flash a custom rom without Knox
Question
mike_kameka said:
Hey guys been stressing for 3 days with my wife's phone. She got the ota to 4.3 and everything seemed fine
until she rebooted the phone. Now any sim i put in says unregistered sim and cant connect. Strange thing is it says there is new voice mail which to me means it is connecting to the network. I've reverted back to factory 4.11 and same problem. But it's still on 4.3 bootloader and Knox is tripped. And since there is no way to revert i317m bootloader like 317 i can't fully go back. I did the free sim unlock and wonder if that could be the problem with it reading the sim cards? Is it like a code unlock? She's freaking and I'm so stressed. Any way to test if phone is reading sim? I'm sure this is software related because it doesn't say no sim and tells me there is new voice mail.
Click to expand...
Click to collapse
I´m having the same problem, any solution?
Ok so this is still a work in progress but it works, and lte works on my att and tmobile sims. Ill post as many screen shots and be detailed as I possibly can so bear with me.....
So i have a samsung galaxy s4 the sgh-s970g, and a customer needed it unlocked so I thought I would give it a try. Its been a fun phone to mess with. So I am on 4.2.2 and this is the only version I have tested on. I havent tested on 4.3 so let me know if it works for you.
So my baseband is MH3. I used saferoot to root the phone and then I used the twrp for the m919 version to get a custom recovery. after this i went into recovery and made a nandroid. I would advice you do the same if your going to try this, because I am in no way responsible for anything that happens to your phone it will trip your knox counter and your warranty is now void.
ok so I have a tmobile sim in the phone the whole time because it gives you a invalid sim message and when you get rid of that the phone is unlocked. Now I flashed the wicked v-8 4.2.2 custom m919 rom onto the phone. And after that i booted it up like normal and had no problems booting it. So when it finally boots up this is what I see....
know with the tmobile rom it is asking for a sim unlock code. This is where it gets a little tricky.. Youll need to download region lock.apk
you can get it from the play store or from the developer on xda, (great app by the way). So now is when i procedded to use spt box to unlock part of this but i believe you can do it without the spt. so just set your phone up and when your done your settings should look like this... youll still have straight talk radio but everything else including kernel is the tmobile m919.
Ok so now go ahead and open up the region unlock apk and instead of pressing unlock your going to lock it. when its done go ahead and reboot it and then its going to ask your for a password again but this time you know it.. Its going to be 00000000, or atleast it was for me but like I said i dont believe spt is needed to reset the efs i believe the region lock apk will do this and it shoould say unlock succesful like this...
the only kicker is anytime you reboot your phone your going to have to run region lock and lock your modem and then reboot and type in the 8 zeros to unlock if someone figures out a better way that would be awesome.. I also believe this method could be used to help unlock the s4 l720t and sm-n900p without the assisstance of sprint. Any feedback and help would be greatly appreciated and enjoy your unlocked phone....
hi bro
robhuffster said:
the only kicker is anytime you reboot your phone your going to have to run region lock and lock your modem and then reboot and type in the 8 zeros to unlock if someone figures out a better way that would be awesome.. I also believe this method could be used to help unlock the s4 l720t and sm-n900p without the assisstance of sprint. Any feedback and help would be greatly appreciated and enjoy your unlocked phone....
Click to expand...
Click to collapse
hi bro, my question is, i have one L720T for unlock this, i need root with m919 ? and unlock with SPT BOX ???
robhuffster said:
Ok so this is still a work in progress but it works, and lte works on my att and tmobile sims. Ill post as many screen shots and be detailed as I possibly can so bear with me.....
So i have a samsung galaxy s4 the sgh-s970g, and a customer needed it unlocked so I thought I would give it a try. Its been a fun phone to mess with. So I am on 4.2.2 and this is the only version I have tested on. I havent tested on 4.3 so let me know if it works for you.
So my baseband is MH3. I used saferoot to root the phone and then I used the twrp for the m919 version to get a custom recovery. after this i went into recovery and made a nandroid. I would advice you do the same if your going to try this, because I am in no way responsible for anything that happens to your phone it will trip your knox counter and your warranty is now void.
ok so I have a tmobile sim in the phone the whole time because it gives you a invalid sim message and when you get rid of that the phone is unlocked. Now I flashed the wicked v-8 4.2.2 custom m919 rom onto the phone. And after that i booted it up like normal and had no problems booting it. So when it finally boots up this is what I see....
know with the tmobile rom it is asking for a sim unlock code. This is where it gets a little tricky.. Youll need to download region lock.apk
you can get it from the play store or from the developer on xda, (great app by the way). So now is when i procedded to use spt box to unlock part of this but i believe you can do it without the spt. so just set your phone up and when your done your settings should look like this... youll still have straight talk radio but everything else including kernel is the tmobile m919.
Ok so now go ahead and open up the region unlock apk and instead of pressing unlock your going to lock it. when its done go ahead and reboot it and then its going to ask your for a password again but this time you know it.. Its going to be 00000000, or atleast it was for me but like I said i dont believe spt is needed to reset the efs i believe the region lock apk will do this and it shoould say unlock succesful like this...
the only kicker is anytime you reboot your phone your going to have to run region lock and lock your modem and then reboot and type in the 8 zeros to unlock if someone figures out a better way that would be awesome.. I also believe this method could be used to help unlock the s4 l720t and sm-n900p without the assisstance of sprint. Any feedback and help would be greatly appreciated and enjoy your unlocked phone....
Click to expand...
Click to collapse
Great news, i read your post on gsmforum and i was waiting for this post. will try the same on other model.
pl share the download link for tmobile rom.
Thanks a lot for your great work.
here
javed91214 said:
Great news, i read your post on gsmforum and i was waiting for this post. will try the same on other model.
pl share the download link for tmobile rom.
Thanks a lot for your great work.
Click to expand...
Click to collapse
its the wicked v8 if your on 4.2.2 or lower and and its v10 if your on 4.3 or higher just look on xda under the m919 youll find it
robhuffster said:
its the wicked v8 if your on 4.2.2 or lower and and its v10 if your on 4.3 or higher just look on xda under the m919 youll find it
Click to expand...
Click to collapse
i tried wicked v8 and v10 both on L720T , but i am getting Invalid sim card error.
javed91214 said:
i tried wicked v8 and v10 both on L720T , but i am getting Invalid sim card error.
Click to expand...
Click to collapse
Region away app works only up to 4.3, so I guess you need to downgrade the baseband to L720T's MK3 modem.
No harm in trying.
Ive tried that
bigbyte.me said:
Region away app works only up to 4.3, so I guess you need to downgrade the baseband to L720T's MK3 modem.
No harm in trying.
Click to expand...
Click to collapse
the l720t was actually shipped with a 4.2.2 rom and if you could find that modem for the 4.2.2 it was originally shipped with you can unlock it
robhuffster said:
the l720t was actually shipped with a 4.2.2 rom and if you could find that modem for the 4.2.2 it was originally shipped with you can unlock it
Click to expand...
Click to collapse
I can only find a 4.3 ROM for L720T not any version before it.
So, just to clarify, do we have to use the ROM or can we do this on stock? I have two of these LTE-T marked phones from Straight Talk that I'd like to use AT&T Straight Talk SIMs with.
tried this on a stock tmobile mdl firmware with the mh3 baseband with no go.. What am i doing wrong?
Has anyone been able to unlock these tracfone devices officially through a tracfone provided unlock code???
imzjustplayin said:
Has anyone been able to unlock these tracfone devices officially through a tracfone provided unlock code???
Click to expand...
Click to collapse
Yes i have, Tracfone will have to provide an update to fix the issue. Reason is that everytime you enter the code its accepted. But as soon as you reboot the phone it asks for the code again. So not sure how tracfone will handle this.
Well I returned my $250 Black Friday special as I just have no faith in getting an unlock code for these Galaxy S4s as I wanted to use it on AT&T and I had picked up the Tmobile version. I'll have to settled for a used item instead.
So will this phone work with a straight talk att Sim and a tmo Sim as long as its through ST?
After fallowing all the steps I get to the 8 0's hit enter and it just sits at the screen, and says unsuccessful. Sgh-s970g bb:mh3 av:4.2.2
Anyone know of a pay site to unlock this device. The one legit one was for over seas and I'm in US. I tried offering straight talk money and they said this phone needs to be active for 5 more months before they'll provide me the unlock code. I guess you need 12 months of active service to be eligible for the unlock program. The only thing is, is it will only work on a straight talk T-Mobile Sim until then. Tia.
It DOES work. I installed the wikid v8 rom on a SHG-S970G this morning, opened region lock, unlocked modem, relocked modem rebooted, and entered my unlock code and BAM, Successful unlock. Thanks a grand! By the way i bought the unlock code on a 3rd party site. Im now running ATT on the phone.
Straighttalk will only unlock phones purchased on or after Dec 2013, currently active on ST Service & have been active for 12 consecutive months, if you call the unlock department you will be transferred to their automated information center if your phone is not eligible for unlocking, this is just to inform you of the requirements to unlock your device.
ST unlock
I've had mine 6 months... Called them 5 times and they told me everytime they couldn't unlock my phone (sgh s970g). So.. I used CHIMURA to root for free. Installed the m919 twrp for recovery. Installed wikid v8 using twrp installed regionlockaway locked the modem rebooted, entered my unlock code and it gave me a successful unlock. As stated I'm running a Straighttalk AT&T sim on mine.
Extrapolate to S5?
james4117 said:
I've had mine 6 months... Called them 5 times and they told me everytime they couldn't unlock my phone (sgh s970g). So.. I used CHIMURA to root for free. Installed the m919 twrp for recovery. Installed wikid v8 using twrp installed regionlockaway locked the modem rebooted, entered my unlock code and it gave me a successful unlock. As stated I'm running a Straighttalk AT&T sim on mine.
Click to expand...
Click to collapse
Do you think a similar technique can be applied to a Galaxy S5 from Net10/TracFone? I tried to use a S902L with my (Canadian ) Rogers SIM card and unsurprisingly, it didn't accept it
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
blu422 said:
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
Click to expand...
Click to collapse
Ive flashed over 24 gn2 and s3's through old modems and menu. There's a sticky about it.
blu422 said:
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
Click to expand...
Click to collapse
By Sim unlock, do you mean you want to use an AT&T phone on another carrier? If that's what you are looking for, give me a few minutes to test something.
creepyncrawly said:
By Sim unlock, do you mean you want to use an AT&T phone on another carrier? If that's what you are looking for, give me a few minutes to test something.
Click to expand...
Click to collapse
Isn't that what a sim unlock is? Correct me if I have it wrong.
emeianoite said:
Isn't that what a sim unlock is? Correct me if I have it wrong.
Click to expand...
Click to collapse
Yes, of course.
But I am fairly new to the note 2 so I don't have much stored up information. I now see a post that indicates that flashing a certain 4.1.1 modem, MJ2 I think, gives the user a service menu where you can change the unlock setting. So now the OP's question makes sense. Only he should have been able to find the same post I did.
In a minute, as soon as my wife lets me borrow her phone, I'm going to test an unlock tool I know about to see if it works on 4.4.2 stock.
creepyncrawly said:
Yes, of course.
But I am fairly new to the note 2 so I don't have much stored up information. I now see a post that indicates that flashing a certain 4.1.1 modem, MJ2 I think, gives the user a service menu where you can change the unlock setting. So now the OP's question makes sense. Only he should have been able to find the same post I did.
In a minute, as soon as my wife lets me borrow her phone, I'm going to test an unlock tool I know about to see if it works on 4.4.2 stock.
Click to expand...
Click to collapse
Yes, but that's for 4.1.2 idk if it will work with 4.4.2 I just don't wanna accidentally ruin my phone. And I think you mean LJ2 not MJ2 and thanks that'd be great if you could keep me posted
emeianoite said:
Ive flashed over 24 gn2 and s3's through old modems and menu. There's a sticky about it.
Click to expand...
Click to collapse
Were any of them on 4.4.2?
blu422 said:
Were any of them on 4.4.2?
Click to expand...
Click to collapse
The dialer codes that worked on 4.1.1 to unlock the phone via the hidden menu. Does not work on 4.4.2 anymore. And being you took the ota update, there's no way of downgrading you firmware...
Sorry to tell you..
Another way is to contact AT&T by email, about unlocking the phone. Can't remember what the exact name is, but goggle search it. They'll send you the SIM code, if the phone is out of contact!!! Takes about 2-3 days when I did my skyrocket to run on TMO.
Just my 2¢®™
Sent from my T889 N2/N3/S5..
At one time, there was a free app on XDA called GalaxSim Unlock. For some reason, the developer pulled the free app download, and the only version then available was the paid version on Play. I have a copy of the free one from before it was pulled, and it works on the Captivate and the Galaxy S II, and some other galaxy phones, not sure which ones. So I tried it tonight on my wife's Note 2 which is running Stock NE5 with TWRP recovery and has the MC3 boot loader. However, the unlock failed, saying unable to read nvdata. So it's apparently a no go on this phone.
Bajanman said:
The dialer codes that worked on 4.1.1 to unlock the phone via the hidden menu. Does not work on 4.4.2 anymore. And being you took the ota update, there's no way of downgrading you firmware...
Sorry to tell you..
Another way is to contact AT&T by email, about unlocking the phone. Can't remember what the exact name is, but goggle search it. They'll send you the SIM code, if the phone is out of contact!!! Takes about 2-3 days when I did my skyrocket to run on TMO.
Just my 2¢®™
Sent from my T889 N2/N3/S5..
Click to expand...
Click to collapse
That only works if the contract the phone was in was not defaulted, and or you are the original owner of the phone.
re: sim unlock
I recently bought a soft bricked SGH-I317 (stuck on "firmware upgrade encountered and issue"). I tried flashing LJ2 firmware and got it to change to being hung on the "Samsung Note II" logo. I think this is when it changed as I was trying all sorts of flashing trying to get off the "firmware upgrade encountered an issue" screen (also Kies would not recognize that the phone was connected). Tried different recoveries and firmware without making any progress until I flashed the 4.4.2 (I317UCUCNE5) bootloader. The phone booted into Philz recovery after that. I then flashed the stock LJ2 firmware w/ LJ2 modem, sim unlocked the phone and then flashed Skynote Air 4.3 along with the 4.4.2 (NE5) modem. This is the setup that I am using on T-Mobile now with no problems except that the Knox counter is tripped. Hope this helps shed some light on the problem.
I discovered a problem with Skynote 4.3 with the 4.4.2 bootloader. If I try to charge it with the phone turned off, the phone will freeze at the empty battery symbol and requires a battery pull to get the phone to turn on. Everything else seems to work okay.
jsdad said:
I recently bought a soft bricked SGH-I317 (stuck on "firmware upgrade encountered and issue"). I tried flashing LJ2 firmware and got it to change to being hung on the "Samsung Note II" logo. I think this is when it changed as I was trying all sorts of flashing trying to get off the "firmware upgrade encountered an issue" screen (also Kies would not recognize that the phone was connected). Tried different recoveries and firmware without making any progress until I flashed the 4.4.2 (I317UCUCNE5) bootloader. The phone booted into Philz recovery after that. I then flashed the stock LJ2 firmware w/ LJ2 modem, sim unlocked the phone and then flashed Skynote Air 4.3 along with the 4.4.2 (NE5) modem. This is the setup that I am using on T-Mobile now with no problems except that the Knox counter is tripped. Hope this helps shed some light on the problem.
I discovered a problem with Skynote 4.3 with the 4.4.2 bootloader. If I try to charge it with the phone turned off, the phone will freeze at the empty battery symbol and requires a battery pull to get the phone to turn on. Everything else seems to work okay.
Click to expand...
Click to collapse
My sister sell her note 2 to me because she's gonna upgrade to samsung galaxy S5. It was an att and I'm using T-mobile.
I did check the baseband ver and It was i317UCUCNE5 (4.4.2 OTA). the question is it is safe to flash base band ver i317UCALJ2 using ODIN?
Can you do the step by step process and also links of the files and software did you use please? thanks
emeianoite said:
Isn't that what a sim unlock is? Correct me if I have it wrong.
Click to expand...
Click to collapse
It's a network unlock, so you are free to use any GSM carrier. You can lock your sim card -- then a pin is required for your phone to connect to your carrier. It's the old skool method to stop unauthorized use, from the days before a lock screen pin.
I bought a SGH-I317M today off someone. It was locked to Bell Canada. I did the dumb thing by letting Kies update the firmware. And as i've read I'm pretty screwed for downgrading it. I tried unlocking it but the hidden menu didn't give me the 4th option in the network lock path. So i tried bunch of things which at one point required me installing Kies for drivers and thats when I i let it slip and update. So now I'm still searching for a method to unlock my phone. I've gotten philstouch recovery on and Skynote working. I just tried flashing the rogers_j2 modem.. hoping this will work.. you think I should just pay one of those sites or a retailer for the sim unlock ccode?
trunks10k said:
I bought a SGH-I317M today off someone. It was locked to Bell Canada. I did the dumb thing by letting Kies update the firmware. And as i've read I'm pretty screwed for downgrading it. I tried unlocking it but the hidden menu didn't give me the 4th option in the network lock path. So i tried bunch of things which at one point required me installing Kies for drivers and thats when I i let it slip and update. So now I'm still searching for a method to unlock my phone. I've gotten philstouch recovery on and Skynote working. I just tried flashing the rogers_j2 modem.. hoping this will work.. you think I should just pay one of those sites or a retailer for the sim unlock ccode?
Click to expand...
Click to collapse
Please let me know if it works. mine is galaxy note 2 4.4.2 NE5 baseband and I've done some research and they said that if you upload your firmware thru OTA there is a possibility that it will soft brick you phone due to unknown security reason.
I'm just waiting for conformation from some one that it's safe to flash J2 modem on a NE5 OTA
in the US, if your phone is more than 6 months old and your contract is in good standing you can ask for the unlock code. I don't know if Canada is similar.
I was going to post the same question about unlocking I317 4.4.2, and found this post which is similar to what I'm looking for so just want to add to pump the question.
It's been a while but I have done unlocking for other At&t models (S3, S4) and learned that later versions don't with the option in hidden menu to unlock, and the work around is to downgrade. However with devices that have OTA updates, it's not possible to downgrade the bootloader.
Is this the same for Note 2 I317? If so, any other method available to unlock this device to use it on other GSM networks? (I just bought one and it's on Kitkat 4.4.2 UCUCNE5, and looking for unlock...)
It's only the modem that needs to be flashed. So whatever bootloader you're on doesn't matter.
I wanted to unlock my phone today. ATT website wouldn't let me do it until my contract was fufilled, so I did some web searching.
Started with 4.4.2 and NE5 baseband. Loaded original baseband via recovery, and used the debug menu to unlock the sim. After that, updated the baseband back to the latest. Tmobile sim seems to be working just fine.
dmrfresh said:
I wanted to unlock my phone today. ATT website wouldn't let me do it until my contract was fufilled, so I did some web searching.
Started with 4.4.2 and NE5 baseband. Loaded original baseband via recovery, and used the debug menu to unlock the sim. After that, updated the baseband back to the latest. Tmobile sim seems to be working just fine.
Click to expand...
Click to collapse
What bootloader were u on?
Sent from the TermiNOTEr 2! ?
Man, what a nightmare...
I moved from Vancouver to California in February, and I've been trying to unlock my phone from Wind ever since. They provided me with an unlock code that doesn't seem to work. Then, after waiting 30 days for them to get me a new code, they gave me the same one. At this point, I doubt that the code is a mismatch to my IMEI, but it's just not working...
Here's the facts:
I have a SGH-T999V running 4.4.2. When I put in the T-Mobile sim card that I'd like to use and then try to put in the unlock code, I get an error message saying that the unlock code was unsuccessful.
Here are the questions that I have:
Do I need to be on the Wind Network to have the unlock code work? I selected T-Mobile as the network operator ever since I moved down to California.
It seems like other people with my version of the phone have had similar issues...is there a solution to this problem?
Can the fine, fine people of this forum help?
This has been a problem since 4.3 with some Samsung devices. Only thing I can suggest is try regionlock away from chainfire to see if it will unlock, which is probably unlikely. Make sure you are on stock firmware with stock kernel
Andrew K. Sterling said:
Hi,
What message are you getting after inserting the code Wind provided?
Click to expand...
Click to collapse
Hi Andrew, it just says "Network unlock request unsuccessful."
I tried rooting my phone and using regionlockaway, which said that the patch was successful, but it seems that wasn't the solution.
It's pretty frustrating since I paid Wind for the unlock code, but it won't unlock my phone! Do you think that there is anything else I can do?
poageboy said:
Hi Andrew, it just says "Network unlock request unsuccessful."
I tried rooting my phone and using regionlockaway, which said that the patch was successful, but it seems that wasn't the solution.
It's pretty frustrating since I paid Wind for the unlock code, but it won't unlock my phone! Do you think that there is anything else I can do?
Click to expand...
Click to collapse
Only other thing is to contact Samsung, since it seems to be a Samsung issue at this point
serio22 said:
Only other thing is to contact Samsung, since it seems to be a Samsung issue at this point
Click to expand...
Click to collapse
Welp, I'll give it a try, but I've seen in other posts that people have been given the runaround by Samsung, who say, "This is because of how Wind locked your phone, can't help you."
I'll update this post with my progress, in case other people are having the same trouble.
I purchased an att gs9+ directly from samsung, after that, I installed the unlocked firmware. Up to this point, I have used an att sim. When I tried to use a tmobile sim recently, I got a message saying "Invalid SIM card inserted - This SIM card is not supported. I was surprised as I thought it was unlocked since I installed the firmware. I then tried to install a version of the ATT firmare thinking I perhaps still needed to unlock it? At any rate, I tried but ODIN gave me the following error: FAIL!(auth).
So, first question is - If I installed unlocked firmware on my att gs9+, is it truly unlocked?
Second question, can I install the att version back again? Or perhaps the tmobile?
Finally - what does the ODIN error mean?
Thanks for taking the time to read,
Ben
benjiesell said:
I purchased an att gs9+ directly from samsung, after that, I installed the unlocked firmware. Up to this point, I have used an att sim. When I tried to use a tmobile sim recently, I got a message saying "Invalid SIM card inserted - This SIM card is not supported. I was surprised as I thought it was unlocked since I installed the firmware. I then tried to install a version of the ATT firmare thinking I perhaps still needed to unlock it? At any rate, I tried but ODIN gave me the following error: FAIL!(auth).
So, first question is - If I installed unlocked firmware on my att gs9+, is it truly unlocked?
Second question, can I install the att version back again? Or perhaps the tmobile?
Finally - what does the ODIN error mean?
Thanks for taking the time to read,
Ben
Click to expand...
Click to collapse
SIM unlock is a completely separate thing which you'd need to use an unlocking service for, nothing to do with the firmware
Check the bootloader version your phone is running now, vs the one you're trying to flash, you cannot downgrade the BL
Download mode will show BL:1 or BL:2)
Firmware shows it here
G960FXXU2BRGA
Flash an equal or higher BL
*Detection* said:
SIM unlock is a completely separate thing which you'd need to use an unlocking service for, nothing to do with the firmware
Check the bootloader version your phone is running now, vs the one you're trying to flash, you cannot downgrade the BL
Download mode will show BL:1 or BL:2)
Firmware shows it here
G960FXXU2BRGA
Flash an equal or higher BL
Click to expand...
Click to collapse
Ok, thanks for the response.
I can see that my bootloader version is 3. I dont see any ATT versions out there for 3 though. Am I correct in thinking that I would need an ATT firmware to even get the sim card unlock prompt? Thats really the issue for me.. I am unable to unlock the device despite trying to reinsert, and running those #XXX*# codes.
benjiesell said:
Ok, thanks for the response.
I can see that my bootloader version is 3. I dont see any ATT versions out there for 3 though. Am I correct in thinking that I would need an ATT firmware to even get the sim card unlock prompt? Thats really the issue for me.. I am unable to unlock the device despite trying to reinsert, and running those #XXX*# codes.
Click to expand...
Click to collapse
nvm...Im not sure if by dumb luck, or putting on several firmwares and clearing things out.. it finally prompted me. wtf...
Thanks for the advice. I learned a few things about the firmware.
benjiesell said:
nvm...Im not sure if by dumb luck, or putting on several firmwares and clearing things out.. it finally prompted me. wtf...
Thanks for the advice. I learned a few things about the firmware.
Click to expand...
Click to collapse
Good stuff :good: