[Q] My Samsung S3 has 1 bar and won't change at all ! - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hey guys I'm having a lot of trouble with my s3 its the bell/version version sghi747 or whatever, and I just flashed the stock rom with odin and everything works fine except for my data. It shows "VIRGIN" on the notification pull down bar and i have only 1 bar. I tried factory resetting it and it still doesn't work. I tried taking out the sim card and putting it back in and it doesn't work. Even with or without my wifi on it still only shows 1 bar. The only time it has more than 1 bar is when I start the phone and then it quickly goes back to one bar. WHAT DO I DO?! :crying:

Did you flash the ROM for your particular phone? I guess you flashed an incompatible ROM when you restored.

Yzaemar said:
Hey guys I'm having a lot of trouble with my s3 its the bell/version version sghi747 or whatever, and I just flashed the stock rom with odin and everything works fine except for my data. It shows "VIRGIN" on the notification pull down bar and i have only 1 bar. I tried factory resetting it and it still doesn't work. I tried taking out the sim card and putting it back in and it doesn't work. Even with or without my wifi on it still only shows 1 bar. The only time it has more than 1 bar is when I start the phone and then it quickly goes back to one bar. WHAT DO I DO?! :crying:
Click to expand...
Click to collapse
is your device rooted? check and make sure you downloaded the correct firmware for your bell S3. stock firmware here: http://forum.xda-developers.com/showthread.php?t=1968625 sounds like you're running the wrong firmware for your phone

xBeerdroiDx said:
is your device rooted? check and make sure you downloaded the correct firmware for your bell S3. stock firmware here: http://forum.xda-developers.com/showthread.php?t=1968625 sounds like you're running the wrong firmware for your phone
Click to expand...
Click to collapse
just downloaded the right firmware lets see what happens ill let u know in a few...

Yzaemar said:
just downloaded the right firmware lets see what happens ill let u know in a few...
Click to expand...
Click to collapse
After flashing stock, boot into recovery and wipe data/cache then reboot. Should be all set

xBeerdroiDx said:
is your device rooted? check and make sure you downloaded the correct firmware for your bell S3. stock firmware here: http://forum.xda-developers.com/showthread.php?t=1968625 sounds like you're running the wrong firmware for your phone
Click to expand...
Click to collapse
still doesn't work man...

xBeerdroiDx said:
After flashing stock, boot into recovery and wipe data/cache then reboot. Should be all set
Click to expand...
Click to collapse
Hey it just started working for 15 seconds I know because i got a **** load of texts and then the bars just went away again..

Yzaemar said:
Hey it just started working for 15 seconds I know because i got a **** load of texts and then the bars just went away again..
Click to expand...
Click to collapse
Verify you have an IMEI number. Make sure you have the correct (Bell) APN settings. Turn off your phone, pull the battery and the sim and leave them out for several minutes before placing them back and booting up the phone.

xBeerdroiDx said:
Verify you have an IMEI number. Make sure you have the correct (Bell) APN settings. Turn off your phone, pull the battery and the sim and leave them out for several minutes before placing them back and booting up the phone.
Click to expand...
Click to collapse
My IMEI says "0" and thats it...

Looks like you need to reinstall your IMEI number. Here are the instructions: http://forum.xda-developers.com/showthread.php?t=1801997
Your IMEI number is on your battery. Good luck! Thank me if I helped.

Yzaemar said:
My IMEI says "0" and thats it...
Click to expand...
Click to collapse
Yeah, you've lost your IMEI, probably while flashing. Read up and follow the directions on this link to restore: http://forum.xda-developers.com/showthread.php?t=1801997

xBeerdroiDx said:
Yeah, you've lost your IMEI, probably while flashing. Read up and follow the directions on this link to restore: http://forum.xda-developers.com/showthread.php?t=1801997
Click to expand...
Click to collapse
honestly all that stuff seems too complicated i've been trying to fix my ****ing phone for literally 5 hours, if i were to send it back to my company (virgin) will they send me a new one?

jfp999 said:
Looks like you need to reinstall your IMEI number. Here are the instructions: http://forum.xda-developers.com/showthread.php?t=1801997
Your IMEI number is on your battery. Good luck! Thank me if I helped.
Click to expand...
Click to collapse
xBeerdroiDx said:
Yeah, you've lost your IMEI, probably while flashing. Read up and follow the directions on this link to restore: http://forum.xda-developers.com/showthread.php?t=1801997
Click to expand...
Click to collapse
Hey guys i followed the steps and it worked! My imei is restored I had to do a few more things but it worked! Thanks a lot!

Related

Hope someone can help me with no signal and loss of IMEI number

Hello,
I hope someone has some idea as to what I can do to fix my T889 Note 2 as right now it has no signal, does not register on the TMobile network and even worse, after playing with it some more it seems I have erased the IMEI in the EFS folder... Here is what I did:
I was initially using the Jedi X 7.2 ROM with Perseus Kernel, and everything was just fine. But I guess I was itching for something else :laugh: ... Reading thru the threads here I saw that some of us had flashed AT&T roms like Cleanrom without any problems. They said Cleanrom did not include an AT&T radio so it would work just fine for the T889. But just to be sure, after full wipe and flashing Cleanrom, I have also flashed a Tmobile Modem and Perseus Pernel for T889. That's when the problems started....
After flashing Cleanrom I had NO signal and the network unknown message... At that point the phone still showed the IMEI number... I have tried going back to Jedi X and Odin back to stock, nothing helped.... It still showed Unknown Network, and Not registered on network, impossible to make calls....
Reading some more thru other XDA threads I saw that someone had posted a solution that had worked for him by going into the Service menu (by pressing *#197328640#) and then going to UMTS, then COMMON then NV REBUILD and then ERASES ALL EFS1/2/3....
At that time I was pretty desperate and seeing that it had worked for someone else with a similar problem I tried it immediately... Now that I really give it some thought, I can't believe I pressed Erase all EFS !! :laugh:
That's when I also got the phone showing me IMEI 0.... I guess now I have lost my IMEI as well? I have not made any backups, so restoring is not an option for me at this point !!
Would anyone have any ideas to help me revive this phone? thanks a lot :victory:
P.S. I should add that I still do have the IMEI number of course, it's written on the back of the phone and the original box as well...
chriss29 said:
Hello,
I hope someone has some idea as to what I can do to fix my T889 Note 2 as right now it has no signal, does not register on the TMobile network and even worse, after playing with it some more it seems I have erased the IMEI in the EFS folder... Here is what I did:
I was initially using the Jedi X 7.2 ROM with Perseus Kernel, and everything was just fine. But I guess I was itching for something else :laugh: ... Reading thru the threads here I saw that some of us had flashed AT&T roms like Cleanrom without any problems. They said Cleanrom did not include an AT&T radio so it would work just fine for the T889. But just to be sure, after full wipe and flashing Cleanrom, I have also flashed a Tmobile Modem and Perseus Pernel for T889. That's when the problems started....
After flashing Cleanrom I had NO signal and the network unknown message... At that point the phone still showed the IMEI number... I have tried going back to Jedi X and Odin back to stock, nothing helped.... It still showed Unknown Network, and Not registered on network, impossible to make calls....
Reading some more thru other XDA threads I saw that someone had posted a solution that had worked for him by going into the Service menu (by pressing *#197328640#) and then going to UMTS, then COMMON then NV REBUILD and then ERASES ALL EFS1/2/3....
At that time I was pretty desperate and seeing that it had worked for someone else with a similar problem I tried it immediately... Now that I really give it some thought, I can't believe I pressed Erase all EFS !! :laugh:
That's when I also got the phone showing me IMEI 0.... I guess now I have lost my IMEI as well? I have not made any backups, so restoring is not an option for me at this point !!
Would anyone have any ideas to help me revive this phone? thanks a lot :victory:
Click to expand...
Click to collapse
Im in the same boat a few days ago. I already did a lot of things a nothing fix it hope someone can help us
Sent from my SGH-T889 using xda app-developers app
Sorry you had to go through this man.. i was going through the same thing when i first got my phone. Xda didn't have a forum for the T-Mobile Note II so i decided to root and flash one of the international version Roms without even making a backup first (dumb of me) then i went ahead and flashed "Android Revolution HD" Rom and lost signal and IMEI showed Unknown.. so i asked for help but no answers.. and then "cmenard" dropped a stock Rom which i'm going to link you to.. i flashed that and flashed the modem on top and that solved the problem for me. So i will go ahead and give you the link to the Stock Rom and the modem i flashed to get my phone to work. Please follow the instrucations. Hope this helps!
Stock Rom: http://forum.xda-developers.com/showthread.php?t=1957209
Modem: http://forum.xda-developers.com/showthread.php?t=1957380
Have a wonderful day!
-Addis
AddisG said:
Sorry you had to go through this man.. i was going through the same thing when i first got my phone. Xda didn't have a forum for the T-Mobile Note II so i decided to root and flash one of the international version Roms without even making a backup first (dumb of me) then i went ahead and flashed "Android Revolution HD" Rom and lost signal and IMEI showed Unknown.. so i asked for help but no answers.. and then "cmenard" dropped a stock Rom which i'm going to link you to.. i flashed that and flashed the modem on top and that solved the problem for me. So i will go ahead and give you the link to the Stock Rom and the modem i flashed to get my phone to work. Please follow the instrucations. Hope this helps!
Stock Rom: http://forum.xda-developers.com/showthread.php?t=1957209
Modem: http://forum.xda-developers.com/showthread.php?t=1957380
Have a wonderful day!
-Addis
Click to expand...
Click to collapse
Dude i lost my imei when i had my gs3 back in july.. I had no one to help me... thanks for hooking the dude up i can only wish someone like you helped me back then... you da man!!!!:good:
appreciate your kind words bro! I hope this helps him get his phone to work again. :fingers-crossed:
I would love to know if this worked for the people that posted no IMEI... If you could post if this worked... It would let me know to keep these two files in a special recovery folder. Thanks
Thanks very much Addis !!! I truly hope this works, will try as soon as I get home from work, in about an hour or so... After trying so many things I have doubts about everything now, but I am keeping my fingers crossed
(UPDATE) : Have managed to download the rom, I am not sure if the file is corrupted or anything, but I keep getting an error message: E:Can't open / external_sd/deodexed_UVALJ1.zip (bad)
Weird, since other roms have flashed just fine....
guys, one thing you MUST DO with gsm devices... back up your IMEI... this is actually stored in a partition on your device, and as of recent there is a handy little app in the themes and apps section to back it up. it is a free app found on the market and offered here on xda. before this there was a tool somebody created to back up and restore this partition
here is the app... download this, back up your IMEI (your efs partition). https://play.google.com/store/apps/...omizer&feature=nav_result#?t=W251bGwsMSwyLDNd
chriss29 said:
(UPDATE) : Have managed to download the rom, I am not sure if the file is corrupted or anything, but I keep getting an error message: E:Can't open / external_sd/deodexed_UVALJ1.zip (bad)
Weird, since other roms have flashed just fine....
Click to expand...
Click to collapse
Yes, probably a bad file... I'll upload it tonight after work for you or try downloading it again. Have a blessed day guys!
Sent from my SGH-T889
AddisG said:
Yes, probably a bad file... I'll upload it tonight after work for you or try downloading it again. Have a blessed day guys!
Sent from my SGH-T889
Click to expand...
Click to collapse
Thank you Addis, no need for you to upload, it seems I finally got a proper download... Flashed it with TeamWin Touch Recovery and no changes, I will try to flash it with CWM also, but that has given me problems with this file.... let's see... Thanks for your help, I will hit your thanks button as soon as I finish writing this...
If all else fails, I will just go ahead and return everything to factory settings and send it in for repair....
P.S. I should mention that I have used a tool found on the GS3 AT&T threads which has worked for my T889 to re-inject my IMEI number back... So now my IMEI number shows up again... But that's about it... Network is still listed as UNKNOWN and Status is listed as Disconnected...
Bestplayer55 I will send you a link to the thread where I have found the program used to reprogram your IMEI, in the evening when I get home.... While it has helped me get my IMEI back, I am still stuck without network or signal, but it may help you more
chriss29 said:
Thank you Addis, no need for you to upload, it seems I finally got a proper download... Flashed it with TeamWin Touch Recovery and no changes, I will try to flash it with CWM also, but that has given me problems with this file.... let's see... Thanks for your help, I will hit your thanks button as soon as I finish writing this...
If all else fails, I will just go ahead and return everything to factory settings and send it in for repair....
P.S. I should mention that I have used a tool found on the GS3 AT&T threads which has worked for my T889 to re-inject my IMEI number back... So now my IMEI number shows up again... But that's about it... Network is still listed as UNKNOWN and Status is listed as Disconnected...
Bestplayer55 I will send you a link to the thread where I have found the program used to reprogram your IMEI, in the evening when I get home.... While it has helped me get my IMEI back, I am still stuck without network or signal, but it may help you more
Click to expand...
Click to collapse
Have you gone into the settings menu, more settings, mobile network and tried connecting to T Mobile that way? If that doesn't work then try to reflash stock T Mobile ROM with Odin and it should reset your network.
Sent from my SGH-T889 using xda premium
chriss29 said:
Thank you Addis, no need for you to upload, it seems I finally got a proper download... Flashed it with TeamWin Touch Recovery and no changes, I will try to flash it with CWM also, but that has given me problems with this file.... let's see... Thanks for your help, I will hit your thanks button as soon as I finish writing this...
If all else fails, I will just go ahead and return everything to factory settings and send it in for repair....
P.S. I should mention that I have used a tool found on the GS3 AT&T threads which has worked for my T889 to re-inject my IMEI number back... So now my IMEI number shows up again... But that's about it... Network is still listed as UNKNOWN and Status is listed as Disconnected...
Bestplayer55 I will send you a link to the thread where I have found the program used to reprogram your IMEI, in the evening when I get home.... While it has helped me get my IMEI back, I am still stuck without network or signal, but it may help you more
Click to expand...
Click to collapse
MAN!! i cant wait to do the same and get mi imei back!!! have a good day!
Bestplayer55 said:
MAN!! i cant wait to do the same and get mi imei back!!! have a good day!
Click to expand...
Click to collapse
Hello again,
Bestplayer55 and anyone else who might need this, this is the tool I have used:
http://forum.xda-developers.com/showthread.php?t=1801997
It's written for the Galaxy S3 for AT&T and other carriers, but it worked for me on the T889 Note 2. Try to read all the instructions carefully .
One of the things you have to do is change a setting in the hidden menu which you access by dialing *#7284# using the stock dialer. In the hidden menu or PhoneUtil menu select USBSettingsMenu choose the correct mode and click ok. The correct mode for the Galaxy S3 is called RMNET + DM + MODEM mode, there was NO SUCH setting for my NOTE 2, but there is one that's very similar, so I chose that....
Then you jump to the section called IMEI Injection ... Pay attention to the way the IMEI is entered, it's a specific sequence, almost backwards....
You have the Instructions in the original thread there, or here:
http://forum.xda-developers.com/showthread.php?t=2077805
In the end thanks to Peoplearmy for developing this tool.
P.S. I just got home from work, so I will keep trying to flash different roms, now that I got my IMEI number back... Hopefully I can restore service as well...
Rhiannon224 said:
Have you gone into the settings menu, more settings, mobile network and tried connecting to T Mobile that way? If that doesn't work then try to reflash stock T Mobile ROM with Odin and it should reset your network.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Thanks a lot for the suggestions, I believe I have tried them before I lost my IMEI number, but I will try them again, it won't hurt !!
Phone is going back to Samsung for repair.... Nothing I have tried has worked ... Let's see what they can do
Hey I was messing with this on my T-Mobile Note II and I changed my RAT mode to WCDMA and now I'm unable to get LTE.
I've done EVERYTHING. I've even ODIN restored it. It WILL NOT connect to LTE anymore. Nothing I do to it makes it want to connect to LTE.
What do I do? Why won't it connect to LTE anymore even after flashing the factory image?
Will erasing EFS1/2/3 do anything to help or is that a really bad idea?
I have no clue what else there is to do. I've tried loading NV defaults but it gives an error for whatever reason.

[Q] Help... MEID, BASEBAND version, etc unknown.

I have a Galaxy Note 2 on the sprint network. Yesterday someone sent me a text and i tried to sent them a text back but my phone didn't have a signal. It reset itself a bunch of times. It stopped resetting and now there is no signal to the tower. I looked on my phone and Baseband version, network, mobile network type say unknown. service state is out of service, username is unavailable. mobile network state is disconnected, my phone number is unknown, min unknown, prl version unknown, meid unknown, imei unknown, iccid unknown. device status modified.
I rooted my phone when i first got it with the method that doesn't make your flash counter go up. I had super user installed and had the OTA survival mode checked and did the OTA update for multiwindow and then lost root. This wasn't a big deal to me so I just left it alone, everything worked. Its been a couple of months and then this happened. I reflashed a stock rom on the phone and that didn't fix anything. I rooted it with the Samsung Note 2 toolkit and that went well. But it somehow got stuck on the boot screen again after a while so i just reflashed to stock.
I downloaded QPST and entered my IMEI into the nv line 550 and clicked the write NV block and returned an error. Im stuck. I have insurance and I've only had the phone a couple of months. What the heck happened? Was it somekind of wipe? I have been working on this all day and I'm going to bed now, but can someone help me out?
I would not have been so quick to start messing with qpst.In most cases where ive seen this the imei and related numbers were fine and it was a system screw up. That said,This happened to me recently and even odin wouldnt fix it. I ran THIS and it brought me back so I would try that first.
billard412 said:
I would not have been so quick to start messing with qpst.In most cases where ive seen this the imei and related numbers were fine and it was a system screw up. That said,This happened to me recently and even odin wouldnt fix it. I ran THIS and it brought me back so I would try that first.
Click to expand...
Click to collapse
thanks. I am downloading that now and will try it and let you know. I didn't want to start messing with qpst but i saw a tutorial that you can enter your imei back into your phone with it. i got my numbers off the box and went to work. but qpst would not write the values into my phone.
when i plug the usb into the phone a flag pops up in windows and says hardware id is missing as well.
billard412 said:
I would not have been so quick to start messing with qpst.In most cases where ive seen this the imei and related numbers were fine and it was a system screw up. That said,This happened to me recently and even odin wouldnt fix it. I ran THIS and it brought me back so I would try that first.
Click to expand...
Click to collapse
i went to the link. i downloaded the file. it was a zip file so i put it on an sdcard and slapped it in my phone. i used the vol up, home key, and pwr key and then i used the update from zip file on external storage. it did some stuff and rebooted. i checked my flash counter and it went up and said i was running custom, custom.
i didn't see any instructions with your post that you linked and I probably didn't use that file the way it was supposed to be used. how exactly do you use it? and when i turned my phone on it still said baseband unknown.
thanks again for helping me with this.
dd807 said:
i went to the link. i downloaded the file. it was a zip file so i put it on an sdcard and slapped it in my phone. i used the vol up, home key, and pwr key and then i used the update from zip file on external storage. it did some stuff and rebooted. i checked my flash counter and it went up and said i was running custom, custom.
i didn't see any instructions with your post that you linked and I probably didn't use that file the way it was supposed to be used. how exactly do you use it? and when i turned my phone on it still said baseband unknown.
thanks again for helping me with this.
Click to expand...
Click to collapse
Do you have Root Explorer? If baseband is showing unknown makes me wonder if build.prop is there and complete...?
It needed flashed in a custom recovery. Did u use twrp or cwm to flash it? If so, you did it right. Is it only the baseband thats unknown or everything still? Did you try a ##72786# dialer code reset?
garwynn said:
Do you have Root Explorer? If baseband is showing unknown makes me wonder if build.prop is there and complete...?
Click to expand...
Click to collapse
I don't have root explorer on here right now because I was trying to return the phone back to stock for a return to the sprint store.
I used the stock rom that you download from the samsung note 2 tool kit. how do i check what your talking about?
billard412 said:
It needed flashed in a custom recovery. Did u use twrp or cwm to flash it? If so, you did it right. Is it only the baseband thats unknown or everything still? Did you try a ##72786# dialer code reset?
Click to expand...
Click to collapse
everything is still unknown.
when i dial ##72786# it goes to a meny labeled SCRTN but is blank with no options.
at this point I used triangle away and flashed the stock rom on my phone, it keeps randomly resetting. in the setttings it still has baseband unknown. i did the ota update and the build number is JROO3C.L900VPALJC
under status, everything is unknown and at the botton it says device modified.
when i put it into download mode right now it says custum binary: no ; current binary: samsung official; system status: custom
this started when the phone just started resetting a bunch after my buddy texted me and then it didn't have service and all the values were wiped, i just want to take it back to sprint because ive only had it for a couple of months. will the above values be ok for a trip to the sprint store?
billard412 said:
It needed flashed in a custom recovery. Did u use twrp or cwm to flash it? If so, you did it right. Is it only the baseband thats unknown or everything still? Did you try a ##72786# dialer code reset?
Click to expand...
Click to collapse
i didnt use twrp or cwm to flash it. just used the factory recovery to. i will use twrp to do it now. thanks man.
billard412 said:
It needed flashed in a custom recovery. Did u use twrp or cwm to flash it? If so, you did it right. Is it only the baseband thats unknown or everything still? Did you try a ##72786# dialer code reset?
Click to expand...
Click to collapse
i think i have a corrupted EFS. can anyone help?
I had this happen to me when I first got the phone and rooted. Scariest first day of ownership thought I was going to have to go in to sprint. Thankfully I flashed the full stock tar and my phone came back to life. Maybe you should try flashing it and see how it turns out for you.
http://forum.xda-developers.com/showthread.php?t=2035566
Sent from my SPH-L900 using xda app-developers app
RayTrue04 said:
I had this happen to me when I first got the phone and rooted. Scariest first day of ownership thought I was going to have to go in to sprint. Thankfully I flashed the full stock tar and my phone came back to life. Maybe you should try flashing it and see how it turns out for you.
http://forum.xda-developers.com/showthread.php?t=2035566
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I went back to full stock with :http://forum.xda-developers.com/showthread.php?t=2086769
i also went baclk to full stock using the samsung note 2 toolkit and triangle away.
both methods left me with custom binary as no and current binary as samsung offical, but system status says custom.
both ways.
and the screenshots that i posted earlier are the same.
i found this thread:
http://forum.xda-developers.com/showthread.php?t=1611796
and i think i have a corrupt EFS.
as it is, does the spring store take your phone back if system status is custom and device says modified?
b.) if i can fix it, it would be better than taking it back. everything on the phone still works, but it obviously cant see a cell phone tower or make calls. data on wifi only type deal.
thanks for any help...
dd807 said:
I went back to full stock with :http://forum.xda-developers.com/showthread.php?t=2086769
i also went baclk to full stock using the samsung note 2 toolkit and triangle away.
both methods left me with custom binary as no and current binary as samsung offical, but system status says custom.
both ways.
and the screenshots that i posted earlier are the same.
i found this thread:
http://forum.xda-developers.com/showthread.php?t=1611796
and i think i have a corrupt EFS.
as it is, does the spring store take your phone back if system status is custom and device says modified?
b.) if i can fix it, it would be better than taking it back. everything on the phone still works, but it obviously cant see a cell phone tower or make calls. data on wifi only type deal.
thanks for any help...
Click to expand...
Click to collapse
I'm not familiar with that EFS issue since I've never read about it. However I would try that tar I posted as a last resort since the stock zip didn't do anything for you. The issue you're describing is the exact same thing that happened to me and that tar brought me back. And about being custom/modified it all depends on the Sprint Rep you get. Some are cool about it some are not.
Sent from my SPH-L900 using xda app-developers app
garwynn said:
Do you have Root Explorer? If baseband is showing unknown makes me wonder if build.prop is there and complete...?
Click to expand...
Click to collapse
i just downloaded root explorer.
i think im having some efs issues. i downloaded efs pro to help with it but it says my phone is not perm rooted. but i do have root right now.
btw- the galaxy note 2 tool kit is friggin awesome- totally donating.
RayTrue04 said:
I'm not familiar with that EFS issue since I've never read about it. However I would try that tar I posted as a last resort since the stock zip didn't do anything for you. The issue you're describing is the exact same thing that happened to me and that tar brought me back. And about being custom/modified it all depends on the Sprint Rep you get. Some are cool about it some are not.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
thanks, ill try it. i mean- whats one more flash right? could fix it. fingers crossed. thanks for your help man.
ill let you know.
also to everyone helping, i made a backup of all my system settings with my backup pro app before all this happened. i was wondering if it backs up your efs data anywhere and if it does, how could i get it back on my phone?
Sent you a pm
Sent from my SPH-L900 using xda app-developers app
RayTrue04 said:
I had this happen to me when I first got the phone and rooted. Scariest first day of ownership thought I was going to have to go in to sprint. Thankfully I flashed the full stock tar and my phone came back to life. Maybe you should try flashing it and see how it turns out for you.
http://forum.xda-developers.com/showthread.php?t=2035566
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
flashed the sextape back to stock rom and it didn't work. i think my efs is corrupted- gunna take something more than flashing- like editing some files to put my meid and other info and pushing it back to my phone.
looking at this right now:http://forum.xda-developers.com/showthread.php?t=2060085
dd807 said:
flashed the sextape back to stock rom and it didn't work. i think my efs is corrupted- gunna take something more than flashing- like editing some files to put my meid and other info and pushing it back to my phone.
looking at this right now:http://forum.xda-developers.com/showthread.php?t=2060085
Click to expand...
Click to collapse
Damn that sucks! I really thought it might bring you back since it worked for me. Good luck!
Sent from my SPH-L900 using xda app-developers app
Update-
my phone is screwed. i got the MSL and put it in my phone and nothing happens. i have to take it back and get a new one.even though all the hardware works, just cant program the info back in the phone for meid, baseband, username, icc id, etc. etc. so no voice calls.
the bummer is that this all happened randomly. i wasn't messing with my phone at all and it was running great then it reset a bunch of times and then wiped everything. i don't know if it would have helped, but i highly reccomend everyone backing up their EFS. because you never know when this will happen to you.
take care, thanks for the help everyone.

Sim not being recognized! Please help asap!

Hi guys, i have been using a ROOTED galaxy note 2 for quite some time now. my phone has been running on the jellybean 4.1.1 version, i decided to manually update to jellybean 4.1.2 with odin (through laptop) all went ok and i managed to upgrade properly. The problem i am having is that once i rebooted my phone (after update) i have been getting an error saying to insert my sim card....it will not recognize there is any simcard whatsoever. Also when i put thw sim card in another phone it works fine and i am able to receive texts etc. Can anyone please offer me some help as my phone is a massive part of my job (as i work on a client basis), and do not have the time to send my phone away for 2 weeks. Any insight would be awesome im up for trying anything. Thanks again! Kes
Remove your sdcard/simcard and factory reset,if not ok flash again without sim/sd card & Insert once Installation finish.
jdomadia said:
Remove your sdcard/simcard and factory reset,if not ok flash again without sim/sd card & Insert once Installation finish.
Click to expand...
Click to collapse
Hi mate thanks for the prompt reply! is there any other way that i would not lose everything on my phone. It is EXACTLY how i want itat the moment (ie. Launcher, settings, customization), and has taken a very long time to get it here. If i knew updating my phone manually wouldof came to this i never would have done it lol atleast not at this time.
Backup your phone with titanium backup copy the files to pc and after reset.
Sent from my GT-N7100 using Tapatalk 2
Hi guys i have just factory reset my phone, i did this by turning the phone on holding the up volume + home + power button, the screen had a picture of the green android guy. I clicked the factory reset and the clear cache options (using the up and down volume buttons). My phone has now restarted asif it was brand new out the box, yet the sim card is still not working (and yes i took the sim out for the reset, only put it back in after i did the initial setup). Have i done something wrong?? did i not do a full reset? could someone please help as i havnt had my work phone for a few days now and its getting harder to keep track of my clients. Any suggestions would be amazing, thanks a lot!
jdomadia said:
Remove your sdcard/simcard and factory reset,if not ok flash again without sim/sd card & Insert once Installation finish.
Click to expand...
Click to collapse
Ive factory reset my phone without the sdcard and sim, nothing has changed though, still getting the same error that there is no sim card. Flash again? so do another factory reset? if you read my last post, that was how i reset my phone, think it was a proper reset im not quite sure
vagsvag said:
Backup your phone with titanium backup copy the files to pc and after reset.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Hi mate cheers for the reply, i liked how titanium backup literally backed up EVERYTHING, ive actually never used it as my backup app. Ive done the reset but still nothing, phone feels just as new, yet still wont pickup on my sim card
englishguy26 said:
Hi guys i have just factory reset my phone, i did this by turning the phone on holding the up volume + home + power button, the screen had a picture of the green android guy. I clicked the factory reset and the clear cache options (using the up and down volume buttons). My phone has now restarted asif it was brand new out the box, yet the sim card is still not working (and yes i took the sim out for the reset, only put it back in after i did the initial setup). Have i done something wrong?? did i not do a full reset? could someone please help as i havnt had my work phone for a few days now and its getting harder to keep track of my clients. Any suggestions would be amazing, thanks a lot!
Click to expand...
Click to collapse
The latest rom modifies the efs folder (where your imei is stored) so only some modems can read it. For unknown reason kies or ota updates don't modify the efs, so the new rom can't use the efs info. The solution is to flash back to an older rom other than dme4/dme6. Your sim will be recognized. I advise you to backup your esf folder and to awlays ve a copy of it
kopchev said:
The latest rom modifies the efs folder (where your imei is stored) so only some modems can read it. For unknown reason kies or ota updates don't modify the efs, so the new rom can't use the efs info. The solution is to flash back to an older rom other than dme4/dme6. Your sim will be recognized. I advise you to backup your esf folder and to awlays ve a copy of it
Click to expand...
Click to collapse
EFS folder mod only gives network error but in his case He says showing error "Insert Sim Card"
Anyway it is wise to flash an older rom or the same rom he was before on
englishguy26 said:
Ive factory reset my phone without the sdcard and sim, nothing has changed though, still getting the same error that there is no sim card. Flash again? so do another factory reset? if you read my last post, that was how i reset my phone, think it was a proper reset im not quite sure
Click to expand...
Click to collapse
Can you Chk & Compare your IMEI no from setting & Under battery is it same?
jdomadia said:
EFS folder mod only gives network error but in his case He says showing error "Insert Sim Card"
Click to expand...
Click to collapse
When i click on mobile networks (through settings) it says "insert SIM card to access network services". When the sim is in properly. My phone also has a circle with a line through it at the top of the notification bar.
englishguy26 said:
When i click on mobile networks (through settings) it says "insert SIM card to access network services". When the sim is in properly. My phone also has a circle with a line through it at the top of the notification bar.
Click to expand...
Click to collapse
*#06# Type in keypad to find your IMEI number,compare with under battery compartment,if it is not same than may possible your network provider has block your number.
kopchev said:
The latest rom modifies the efs folder (where your imei is stored) so only some modems can read it. For unknown reason kies or ota updates don't modify the efs, so the new rom can't use the efs info. The solution is to flash back to an older rom other than dme4/dme6. Your sim will be recognized. I advise you to backup your esf folder and to awlays ve a copy of it
Click to expand...
Click to collapse
Thanks for the reply mate! Really sorry to ask this, but is there anyway you can do a quick step by step, as i dont know what ota or efs mean lol its very important i get this fixed asap, if its not fixed by tuesday, i will have to get it sent off. My business is done through clientele, so not having my phone has caused lots of problems the past few days, cant imagine how bad its going to be if i have to send my phone off for a week of two. Cheers mate!
jdomadia said:
*#06# Type in keypad to find your IMEI number,compare with under battery compartment,if it is not same than may possible your network provider has block your number.
Click to expand...
Click to collapse
Will check this when i get back from work today, my phone definitely has not been blocked as i have been down to vodafone and my service is all up and running
jdomadia said:
*#06# Type in keypad to find your IMEI number,compare with under battery compartment,if it is not same than may possible your network provider has block your number.
Click to expand...
Click to collapse
Have typed that into my keypad and it says "null / null". Plus on the settings (under status) it says "unknown" under both the IMEI and IMEI SV tabs
I have te same isse too
Hi please help me I had a perfectly working phone. But wasn't happy with the custom rom I was using so I unroot my phone. My original rom was DLK7 but I couldn't find the rom so when I unroot I used ALJ1 root again and load hawkish rom it was working perfectly up until I put my phone in block mode since than my phone gives the error "Not Registered on Network" I have been unrooting and rooting. I don't have a warranty I need to fix my phone on my own please help me
Flash ME6 uk based rom threw odin, download from Sammobile.com after flash clear data, hopefully everything will be fine.
Sent from my GT-N7100
jdomadia said:
Flash ME6 uk based rom threw odin, download from Sammobile.com after flash clear data, hopefully everything will be fine.
Sent from my GT-N7100
Click to expand...
Click to collapse
Awesome cheers mate will try this when i get back! would that mean i would not have the newest update? or could i just flash the newest rom after?
Dude first thing is check if your Imei is corrupt. Go to about device/status and if it starts with 0049, this means it's corrupt and without a backup Samsung are the only ones who can fix as they have to replace the motherboard. If it is corrupt you could try moving your efs to SD card and then rebooting and then moving it back.
Sent from my GT-N7100 using xda app-developers app

Need to completely reset phone back to box settings for resale.

As the title says. I'm selling this phone (not for performance issues, just I want the iPhone ), and I need a step-by-step
guide on how to COMPLETELY wipe it. No logs, nothing. Back to original out-of-the-box phone. Thank you!
Here you go.
https://forums.oneplus.net/threads/...lus-3-and-go-back-completely-to-stock.456232/
kgs1992 said:
Here you go.
https://forums.oneplus.net/threads/...lus-3-and-go-back-completely-to-stock.456232/
Click to expand...
Click to collapse
Will this completely remove any hidden files that may have my personal information?
ohsn said:
Will this completely remove any hidden files that may have my personal information?
Click to expand...
Click to collapse
Performing a full data format with a custom recovery multiple times will leave no personal information. Then you can go do your restore to stock ROM
ohsn said:
As the title says. I'm selling this phone (not for performance issues, just I want the iPhone ), and I need a step-by-step
guide on how to COMPLETELY wipe it. No logs, nothing. Back to original out-of-the-box phone. Thank you!
Click to expand...
Click to collapse
Is this your first phone? First android phone? I mean a quick google search would of told you how to reset as well. Also factory reset is just that a factory reset that puts your phone back to factory specs like when you first got it. Also better information in your post would of been to let us know if you were rooted or not and not your bad phone purchasing choice.... j/k not really LOL
Hope you got it all sorted out if not let us know we will be more than happy to send you off the right way :good:
playya said:
Is this your first phone? First android phone? I mean a quick google search would of told you how to reset as well. Also factory reset is just that a factory reset that puts your phone back to factory specs like when you first got it. Also better information in your post would of been to let us know if you were rooted or not and not your bad phone purchasing choice.... j/k not really LOL
Hope you got it all sorted out if not let us know we will be more than happy to send you off the right way :good:
Click to expand...
Click to collapse
This is my first android phone, yes. It was rooted as well. I'm having a problem resetting though. I oem locked, flashed to stock recovery, and tried to do the adb usb thing. However, it keeps saying that it cannot read file. Please help! I reinstalled the drivers already. Thank you!
ohsn said:
This is my first android phone, yes. It was rooted as well. I'm having a problem resetting though. I oem locked, flashed to stock recovery, and tried to do the adb usb thing. However, it keeps saying that it cannot read file. Please help! I reinstalled the drivers already. Thank you!
Click to expand...
Click to collapse
did you do all this after flashing a stock rom?
playya said:
did you do all this after flashing a stock rom?
Click to expand...
Click to collapse
No. I followed exactly how the video said above.

Having trouble with the service.

My problem started some months ago, when a friend tried to root my phone, he told me that he rooted it but every app that checks for root told me that it wasn't rooted and i couldn't use apps that needed root also, the downside to all this is that i couldn't use apps that do not allow root, like the banking app, or Pokemon Go, but i used the phone like that for some months until last week when i decided to try and fix it. I thought that if i flash a stock firmware everything should be fine and the phone should be as new. On the phone, it says that the model is SM-N910F(behind the battery), in the settings it also said SM-N910F, so i tried flashing a rom for this model at first and it kept failing with me not knowing why. After trying different thing and googleing some time, i finally noticed that in "Fast Download", it says that the phone's model is SM-N910P, so i started searching about this, i didn;t understand why there were 2 different models on my phone, then i found out about searching my IMEI on imei.info, so i tried it and here it was SM-N910C, i had no idea what all this meant, but at this time i already got stuck into bootloop. Eventually, i found this thread: https://forum.xda-developers.com/note-4/help/help-sm-n910f-sm-n910p-bootloader-t3299285 and did what cam_bob22 said, it worked, i finally flashed the firmware on my phone and it worked, i could use the bank app, pokemon go, everything was fine except the fact that i couldn't select or change my mobile operator, when going to mobile networks, the mobile operators options was greyed out and couldn't be pressed(i want to mention that i did have service and that data worked but the internet would work only in roaming and i couldn't get 4G). So i tried updating the software from 5.1.1 to 6.0.1 like it was said in the instructions and hopping that this update would fix the issue, but unfortunately for me after the update i somehow lost service completely, the signal sign was in the shape of a triangle with no bars, and the mobile operators setting was exactly as before.
So far i tried going back to 5.1.1 but besides the Hands Free activation that i can't make to go away, i still can't use the mobile operators setting and my data only works with roaming activated and doesn't get 4g. One thing that i forgot to mention is that the IMEI with the 5.1.1 firmware was of a samasung Galaxy S5 not a note 4, i checked it on imei.info.
I was wondering if there is any way for me to go back to the OS i had before my friend tried to root my phone, when it said in the settings that it was SM-N910F and everything worked as it should have.
Thank you for reading and i really hope someone can help me.
@robert11arad
There is no way to go back unless he made a backup. Which is why you should always do this before you flash anything.
I'm not sure if this will help but you could try flashing a international custom Rom after you have correct firmware. But if your phone is a Sprint version, you'll have to use a special data fix and kernel.
What firmware did you end up using to flash? Was it Sprint? If so, and you use gsm service, try flashing my Gsm stock Rom for Sprint phones. It's in post 2.
https://forum.xda-developers.com/no...t/05-15-17-debloated-deodexed-rooted-t3607029
You'll first need to be on current marshmallow firmware. So flash firmware with Odin first, then install Twrp with Odin. Then install Rom with Twrp.
aaron74 said:
@robert11arad
There is no way to go back unless he made a backup. Which is why you should always do this before you flash anything.
I'm not sure if this will help but you could try flashing a international custom Rom after you have correct firmware. But if your phone is a Sprint version, you'll have to use a special data fix and kernel.
What firmware did you end up using to flash? Was it Sprint? If so, and you use gsm service, try flashing my Gsm stock Rom for Sprint phones. It's in post 2.
https://forum.xda-developers.com/no...t/05-15-17-debloated-deodexed-rooted-t3607029
You'll first need to be on current marshmallow firmware. So flash firmware with Odin first, then install Twrp with Odin. Then install Rom with Twrp.
Click to expand...
Click to collapse
Thank you for the reply, i wanted to say that with the Sprint firmware i used, after doing all the updates it unlocked the mobile operators option, but it couldn't find any.
robert11arad said:
Thank you for the reply, i wanted to say that with the Sprint firmware i used, after doing all the updates it unlocked the mobile operators option, but it couldn't find any.
Click to expand...
Click to collapse
Oh ok. So do you have service?
aaron74 said:
Oh ok. So do you have service?
Click to expand...
Click to collapse
No, the network operators is unlocked but there's still no service, when i try scanning for an operator it just stops with no message, and nothing happens.
I forgot to mention this, but before all this happened, I made a back-up of the phone with smart switch, is it possible to get back to how it was using that? And another thing is that when using the backup, it only restores music and photos, no contacts, no apps.(From what i've noticed so far)
robert11arad said:
No, the network operators is unlocked but there's still no service, when i try scanning for an operator it just stops with no message, and nothing happens.
I forgot to mention this, but before all this happened, I made a back-up of the phone with smart switch, is it possible to get back to how it was using that? And another thing is that when using the backup, it only restores music and photos, no contacts, no apps.(From what i've noticed so far)
Click to expand...
Click to collapse
You would have needed a system backup with twrp.
What country you in? What network you on? What firmware you on?
aaron74 said:
You would have needed a system backup with twrp.
What country you in? What network you on? What firmware you on?
Click to expand...
Click to collapse
I live in the UK, i'm on giffgaff and the firmware is N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5
robert11arad said:
I live in the UK, i'm on giffgaff and the firmware is N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5
Click to expand...
Click to collapse
Ok. About the best advice i can give is, because your on pure Sprint Rom, something is messing up with csc or something.
All i can suggest, is maybe try updating to QC1 with Odin and then try flashing my gsm Rom. Which is essentially just a tmobile rom.
And if that don't give you the function you you need. Then maybe try an international Rom.
It's hard to say what the last person did to the phone.
robert11arad said:
I live in the UK, i'm on giffgaff and the firmware is N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5
Click to expand...
Click to collapse
Also. You stated your phone first showed as a 910f. So maybe flashing a international F rom, will provide the correct csc settings for your phone to work. Only problem your gonna have, is because it's Sprint hardware, you'll have to pair the Rom with a kernel that'll work and some lib files for data.
I can help you by putting together some files to flash. But the main question would be, Do you want a stock note 4 Rom?
Also before any of this happened, do you know what firmware you were on? Marshmallow? Lollipop?
aaron74 said:
Also. You stated your phone first showed as a 910f. So maybe flashing a international F rom, will provide the correct csc settings for your phone to work. Only problem your gonna have, is because it's Sprint hardware, you'll have to pair the Rom with a kernel that'll work and some lib files for data.
I can help you by putting together some files to flash. But the main question would be, Do you want a stock note 4 Rom?
Also before any of this happened, do you know what firmware you were on? Marshmallow? Lollipop?
Click to expand...
Click to collapse
I would really appreciate if you helped me put the files together cause i have no idea how any of this works, i'm new. But i wanted to ask, is there any chance for thia to brick my phone?
When it had sm-n910f on it i couldn't update it after 5.1.1, when i pressed update it wouldn't do anything.
And yes, if possible i would like it to be a stock firmware, but if it is not possible i don't mind using something else as long as it works properly.
Thank you for all your help, i don't know what i would do otherwise.
robert11arad said:
I would really appreciate if you helped me put the files together cause i have no idea how any of this works, i'm new. But i wanted to ask, is there any chance for thia to brick my phone?
When it had sm-n910f on it i couldn't update it after 5.1.1, when i pressed update it wouldn't do anything.
And yes, if possible i would like it to be a stock firmware, but if it is not possible i don't mind using something else as long as it works properly.
Thank you for all your help, i don't know what i would do otherwise.
Click to expand...
Click to collapse
Well, first, let me state,about bricking device. I have to state that it's not impossible to brick. But after hundreds of flashes never had problem. These devices are hard to brick. What hard bricks a device is messing with boot loader and partitions that shouldn't be messed with, like trying to unlock lte bands. But just flashing roms is fine unless you flash a Rom not for your phone and it over writes wrong partition.
All snap Dragon note 4s have the same layout so all you need is correct kernel, csc, and some ril lib files to get data working.
Now, mine main worry is that the phone is still unlocked,because I don't know what possible changes were made to it.
But with all that being said,I'll move on. With another post.
---------- Post added at 05:52 PM ---------- Previous post was at 05:13 PM ----------
@robert11arad
Before we go too deep into this and upgrade and stuff. I'd like to just test a custom Rom on your phone and see what works.
So what firmware are you on right now?
5.01, 5.1.1, or 6.0.1?
I'm gonna take a guess and move on. You last stated you were on OG5 which it's 5.1.1. So if that's true, let's try the following.
First I'm gonna assume you already used Odin to flash that firmware. So now we need to flash Twrp. So download this on pc https://eu.dl.twrp.me/trlte/twrp-3.1.1-0-trlte.img.tar
1 . Put phone in download mode. Open Odin and plug in phone.
2. In Odin options make sure everything is unticked except Reset Flash Counter.
3. Now click on AP and select the Twrp file.
4. Flash it. Let it flash until it states it's completed. Once done. Unplug phone. Pull out battery. Put back in and boot to recovery by holding power+home+vol.up
5. Now you should have Twrp. Just reboot phone so we can continue to next post.
PM sent
@robert11arad
Ok, here you go. If your where we left off, you should be on stock QC1 and have Twrp installed.
Just download this file, boot into recovery, and install. This file will delete dalvick/cache, so phone will take a few minutes to boot up.
I actually recommend before flashing, you do a factory reset in recovery then install.
Anyhow here you go. Let me know if it fixes what your looking for. If not, my only others option is to install a custom n910f Rom. I'll gladly walk you through if need be. But try this first.
aaron74 said:
@robert11arad
Ok, here you go. If your where we left off, you should be on stock QC1 and have Twrp installed.
Just download this file, boot into recovery, and install. This file will delete dalvick/cache, so phone will take a few minutes to boot up.
I actually recommend before flashing, you do a factory reset in recovery then install.
Anyhow here you go. Let me know if it fixes what your looking for. If not, my only others option is to install a custom n910f Rom. I'll gladly walk you through if need be. But try this first.
Click to expand...
Click to collapse
Alright so i just tried it and when starting my phone, i can't even set it up because i keep getting a message that com.android.phone has stopped. After about half an hour of trying to start it, i finally managed to get to setting and to app manager, there i looked for com.android.phone and it was nowhere to be found. Apart from this i noticed a N with some signal bars where my phone signal should've been and i didn;t get the hands free activation anymore, but that's all...
robert11arad said:
Alright so i just tried it and when starting my phone, i can't even set it up because i keep getting a message that com.android.phone has stopped. After about half an hour of trying to start it, i finally managed to get to setting and to app manager, there i looked for com.android.phone and it was nowhere to be found. Apart from this i noticed a N with some signal bars where my phone signal should've been and i didn;t get the hands free activation anymore, but that's all...
Click to expand...
Click to collapse
Ok. I must have forgot something in csc. Sorry. I'll get back with you.

Categories

Resources