i rooted my gnex then i installed a custom rom but i have no gapps , i have no titanium backup no rooted apps just seperuser , i tried to flash gapps but nothing happens
Full wipe then try again. If that doesn't work download rom and gapps again then full wipe and try again. Use the gapps from goomanager.
You're flashing gapps after you flash the rom but before the first boot of your device right?
namtombout said:
Full wipe then try again. If that doesn't work download rom and gapps again then full wipe and try again. Use the gapps from goomanager.
You're flashing gapps after you flash the rom but before the first boot of your device right?
Click to expand...
Click to collapse
thanks have google play now
Related
i have a unlocked & rooted galaxy nexus....i flash the rom open kang build 22 & flash the gapps 4.0.4 after i rebooted. i stocked in bootanimation & hang up & appear the google logo, always like that...cannot start.....HELP please....
Wipe and reflash the ROM then Gapps, then boot.
Did you do a full wipe. Wipe factory/data, cache partition and in the advanced menu wipe dalvik cache. Then flash rom and gapps
After you flash the rom, wipe data,cache,dalvik and flash gapps. You cant just flash rom than the 4.0.4 gapps you will get the bootloop.
i already do full wipe & still the same problem?
1. Wipe data
2. Wipe cache
3. Wipe dalvik cache
4. Flash ROM
5. Flash Gapps
6. Reboot
krisjuls said:
i already do full wipe & still the same problem?
Click to expand...
Click to collapse
In addition to doing what Eddy says, re-download the rom and Gapps.
Thanks for reply but still the same problem
charlieb620 said:
After you flash the rom, wipe data,cache,dalvik and flash gapps. You cant just flash rom than the 4.0.4 gapps you will get the bootloop.
Click to expand...
Click to collapse
I always flash like that never have a problem. Never reflash after flash. Try to flash another ROM OP to see if it was the ROM or not.
Sent from my Galaxy Nexus using Tapatalk
i install other rom foxhound ang still the same problem
i choose the show log it says rm: can't remove '/data/dalvik-cache':no such file or directory....rm:can't remove '/cache/dalvik-cache:no such file or directory.....rm: can't remove '/sd-ext/dalvik-cache': no such file or deirectory
Thanks guys for all ur reply & time.......i already done all...its ok now, i use the wugfresh to flash stock & unroot and unlock & unroot again.Again Many Thanks
when i try to install any rom other than cm10 and 10.1 it wont go past the boot logo i think jedi mind trick still works i have used CWM recovery and twrp recovery and i always wipe in this order; cache,dalvik,factory,system..... then i install and wipe cache and dalvik again do my gapps if there is one then another cache and dalvik and boot and i always hang on the bootlogo could the wrong gapps version make any difference ike using 4.2.1 gapps on 4.1 or 4.0 cause it not to boot it shouldnt keep it from booting
One way to find out if it is the gapps causing the problem is to install the rom, after installing the rom DO NOT install gapps and reboot the rom and see if it comes up, if it comes up fine then reboot into recovery and install gapps, then if it doesn't come up you know it is the gapps. I always install this way because I have had issues with gapps, need to make sure you have the right gapps for the rom your installing, sometimes I get a bad download and have the same problem, just redownload and try again
can't post a link yet but go to goo.im/gapps, that has helped me
JMT
Jedi mind Trick isn't too bad for our phone
To get Jedi mind trick to install without boot loop or boot hang then after you flash a ROM do a factory reset instead of wiping dalvik and cache then reboot
Sent from my SGH-T989 using xda app-developers app
Hello, i'm a fresh man on my P936.
I got some trouble on flashing roms except of stock rom (full rom).
In my case, I can:
1. Access to CWM
2. Flash stock rom, stock-modificatied rom or full rom successfully
However, I failed in
1. flashing other roms likes PAC-man rom, ChaOS and etc third party rom. After I flashing those rom, and reboot my phone. The screen did not show anything, dark screen with LCD background light.:crying:
I have follow those inspections and tried many times.
Does any users have those experience before? And how can I solve it?
Thanks a lot:angel:
before you flash a non stock rom you need to wipe data, cache, dalvik, wipe battery stats (optional)
also do a nandroid backup before you wipe incase the new rom doesn't work for whatever reason, i had a problem flashing pacrom though too btw, it might just be the rom. you can try an older version or something too
If you're coming from another ROM It is recommended that you first do backup then FULL wipe then flash ROM
kidcalcium said:
If you're coming from another ROM It is recommended that you first do backup then FULL wipe then flash ROM
Click to expand...
Click to collapse
that's what he said ^^
OGPunc said:
that's what he said ^^
Click to expand...
Click to collapse
I did it, but fail to install PAC ram.
I tried
1. FULL Wipe -> install .zip reboot
2. FULL Wipe -> install .zip reboot -> FULL Wipe
but all the results are fail
ki1233 said:
I did it, but fail to install PAC ram.
I tried
1. FULL Wipe -> install .zip reboot
2. FULL Wipe -> install .zip reboot -> FULL Wipe
but all the results are fail
Click to expand...
Click to collapse
Which PAC are you flashing? Some recent nightless do not boot.
Try CM10.1RC5
mpsantiago said:
Which PAC are you flashing? Some recent nightless do not boot.
Try CM10.1RC5
Click to expand...
Click to collapse
The RC ver is OK, but the latest version (17-6-2013) cannot boost.
ki1233 said:
The RC ver is OK, but the latest version (17-6-2013) cannot boost.
Click to expand...
Click to collapse
Yeah its a bug. Try flashing Wind 2.3 immediately after flashing CM (or PAC) and gapps, with no reboots between.
mpsantiago said:
Yeah its a bug. Try flashing Wind 2.3 immediately after flashing CM (or PAC) and gapps, with no reboots between.
Click to expand...
Click to collapse
:victory:
thanks a lot
Thanks, this helped me too.
Hello,
I don't know why my lg g3 phone doesn't want boot on custom rom.
I have the LG G3 d855 model, 16gb memory and here are my procedure to install every custom rom :
1. Flash Stock ROM using LGUP (the version of the firmware is not important but the possibility to root is)
2. Install KingRoot and get root
3. Install AutoREC and enter to the recovery
8. Flash Recovery TWRP 3.1.0-2
9. Reboot to the new recovery
10. ADVANCED WIPE (wipe cache, dalvik cache, data and SYSTEM)
11. Flash baseband 21C
12. Flash CUSTOM rom
13. Wipe cache and dalvik cache
14. Flash Gapp
15. Wipe cache and dalvik cache
16. Reboot
I think I did nothing bad...
but the phone does not start and it stays at the initial logo screen (not the LG logo, but the custom rom logo). I waited over 10 minutes to boot but nothing. Even though I install the identical rom again or install an anoter rom, each time the same issue.
This happens with all custom rom (xenonhd, resurrection remix, and now lineageOS)
I can use and boot on stock rom but each time I want to install a custom rom, my phone doesn't want to boot. The phone display stays at the initial rom logo screen.
It seems that I am alone to have this problem.
I don't know why and I search everywhere to find out the solution...
PS : My phone never restart by itself. I never have bootloop with my phone when I using stock rom and same with custom rom..
The problem is the boot with a custom rom. The phone don't want to boot and stay on logo loading...
Any suggestion may be help.
Thank you.
1. Once you installed TWRP you don't have to go back to stock to switch roms. From then on you can just download zips and flash them.
2. You need to delete everything (including system) except internal and external storage ( so you can still flash the zip for xceed, otherwise you will delete it). Remember that you will lose all your apps including your data with it. You can backup them with titanium backup tho. Pictures and video's will still be there as they are stored on the internal or external storage.
3. You also need to flash the GAPPS package after flashing rom, for xceed (7.1.1), pick nano (ARM)
4. Wipe cache and dalvik after flashing and reboot.
5. Make a backup before you do so !!!!!!
Good luck.
Jornwitt said:
1. Once you installed TWRP you don't have to go back to stock to switch roms. From then on you can just download zips and flash them.
2. You need to delete everything (including system) except internal and external storage ( so you can still flash the zip for xceed, otherwise you will delete it). Remember that you will lose all your apps including your data with it. You can backup them with titanium backup tho. Pictures and video's will still be there as they are stored on the internal or external storage.
3. You also need to flash the GAPPS package after flashing rom, for xceed (7.1.1), pick nano (ARM)
4. Wipe cache and dalvik after flashing and reboot.
5. Make a backup before you do so !!!!!!
Good luck.
Click to expand...
Click to collapse
Hello,
1. I think that but with specific rom, some people tell us to flash stock rom before flashing a custom rom. eMMC bug related ?
2. Deleting the system changes nothing because the system is wiped when I flash the rom, right ?
3. if the rom boot first then I will install Gapps. Else, I don’t install because the rom doesn’t want to boot.
1. Well .. I've been switching between fulmics,xceed,rr, .. etc without any problem so no, there is no need to go back to stock everytime.
2. Try it, you won't be able to boot until you flash a new rom, but it could help. That's why you take a backup in the first place. It is more 'clean' and if you don't try it you won't know.
3. Sometimes you have to flash gapps directly after the rom or you will be in for a bad time if you do afterwards.
Once you have TWRP recovery installed it's the easiest thing ever to flash a new rom. Make sure your zip files are downloaded okay. Download the MD3 to check it. Try to download via MEGA app or so, because browsers downloads tend to have errors sometimes.
Apart from that. Don't root via kingroot. They have had some suspicious cases where malware was installed on the phone when rooting.
If nothing's works. Go back to full stock through KDZ, root wit your PC, install TWRP via autorec, go to recovery, wipe everything, install modem 21C, install rom and gapps, wipe cache, reboot. Don't try anything other than that.
I have the same problem
Jornwitt said:
1. Well .. I've been switching between fulmics,xceed,rr, .. etc without any problem so no, there is no need to go back to stock everytime.
2. Try it, you won't be able to boot until you flash a new rom, but it could help. That's why you take a backup in the first place. It is more 'clean' and if you don't try it you won't know.
3. Sometimes you have to flash gapps directly after the rom or you will be in for a bad time if you do afterwards.
Once you have TWRP recovery installed it's the easiest thing ever to flash a new rom. Make sure your zip files are downloaded okay. Download the MD3 to check it. Try to download via MEGA app or so, because browsers downloads tend to have errors sometimes.
Apart from that. Don't root via kingroot. They have had some suspicious cases where malware was installed on the phone when rooting.
If nothing's works. Go back to full stock through KDZ, root wit your PC, install TWRP via autorec, go to recovery, wipe everything, install modem 21C, install rom and gapps, wipe cache, reboot. Don't try anything other than that.
Click to expand...
Click to collapse
Hello,
I have a question.
Can you give me a gapp 100% compatible with all custom rom with android 7.1.2, because i think opengapp are not reliable. Maybe the gapp will cause my issue and the rom won't boot.
Can i use this one https://forum.xda-developers.com/on...isited-slim-gapps-6-0-7-0-unofficial-t3462088 ?
I always use PICO version of gapp
Thank
https://download.mokeedev.com/?device=sagit
I'm
Wipe all
Flash firmware 7.12.7 and try 7.11.26
Install rom
Install gapp
Wipe cache
Reboot
But my phone is bootloop
How to install mokee rom ?
Thanks all.
After installing rom, gapps, you need to format all data user. Then, you can reboot your device without any problem.
Format data is not wiping all, it's another button in twrp wipe