Related
can use to run again NaviFirmplus_1.7 software operating system for nokia phone 900 lumia bound by AT & T does not?
because I have seen in NaviFirmplus_1.7 software operating system for 900 Lumia
I am a Vietnam - I used to interpret the language http://translate.google.com.vn
No it cannot be unlocked/debranded now by flashing it through a firmware from Navifirm.
RM-808 is for North America (Rogers and AT&T) while RM-823 is for Europe (Finland).
A user on this forum tried flashing an RM-823 firmware to his RM-808 AT&T Lumia 900, but could not get it to work.
Well here it is, i'm downloading now. Mostly EU and Finland...I'm in AU but going to try finland.
Hi i have a nokia lumia 900 from att can i download this rom ????
aggelosss5 said:
Hi i have a nokia lumia 900 from att can i download this rom ????
Click to expand...
Click to collapse
Not until the at&t variants are released.
Rm-823 is released AT&T is an rm-808
Sent from my Lumia 900 using XDA Windows Phone 7 App
Has anyone tried installing the 823 onto the 808? i would be curious to know what happens or what the changes are? In a lot of industries, the model changes but the inards don't.
It will not flash the 823 to an 808. You can pick the rom, but when it tries to flash it barfs.
YEah in this case they are different hardware. from what i can figure the RM-823 has the GSM, 3G and HSDPA bands where the RM-808 has the 4G/LTE bands. In most cases Lumias have all radio and enabled by software but not so with the AT&T models.
so there are loads on there now which make me think that they are getting ready for roll out, would be a nice Chrimbo present.
2 Questions, if you see an EU variant for White, will it work with an EU phone? My current is
Type Designator RM-823
Model Name NOKIA Lumia 900
Product Code 059P5N9
Software Version 2175.2503.8779.12301
Next question is looking on xda etc I must be blind, I see lots of people say they are rocking 7.8 but can not how to get to it. Any pointers to a good post would be happily received.
Cheers
Just finished installing Software Version 2175.2905.8858.12480, Finland variant and apart from some confusion with the Finnish language (until I could change it to English) when first starting up it seems to be running fine.
So far all I've tested is connecting WiFi to my wireless network and then wirelessly tethering the phone to my laptop and it all seems to be working as it should.
Will do some more testing of various functions and let you know if there are any problems.
Now to setup my Home screen tiles properly (finally)
scottietohottie said:
so there are loads on there now which make me think that they are getting ready for roll out, would be a nice Chrimbo present.
2 Questions, if you see an EU variant for White, will it work with an EU phone? My current is
Type Designator RM-823
Model Name NOKIA Lumia 900
Product Code 059P5N9
Software Version 2175.2503.8779.12301
Next question is looking on xda etc I must be blind, I see lots of people say they are rocking 7.8 but can not how to get to it. Any pointers to a good post would be happily received.
Cheers
Click to expand...
Click to collapse
Check here mate:
http://forum.xda-developers.com/showpost.php?p=35452034&postcount=228
Also as long as it's an rm-823 and the country variant has the same bands as your country then your all good. Worst thing that can happen is your reception won't be as good if the variant you flash from does not have the same bands.
If it doesn't work well, just reflash a different one, all good
Sent from my Lumia 900 using XDA Windows Phone 7 App
Hi i have a nokia lumia 900 from att can i flash a diffrent variant 823 to my phone ??
aggelosss5 said:
Hi i have a nokia lumia 900 from att can i flash a diffrent variant 823 to my phone ??
Click to expand...
Click to collapse
No. Not even when the RM-808 is out. It HAS to be the at&t version. Rogers won't flash on a at&t RM-808.
norgan said:
Also as long as it's an rm-823 and the country variant has the same bands as your country then your all good. Worst thing that can happen is your reception won't be as good if the variant you flash from does not have the same bands.
If it doesn't work well, just reflash a different one, all good
Sent from my Lumia 900 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
So I have tried to just flash it in the care suite, I have tried
http://community.giffgaff.com/t5/Learn-giffgaff-Top-Tips/HOWTO-Debrand-your-Nokia-Lumia-800-Giffgaffers-guide/td-p/2891451
All to no avail, I have checked the base bands the UK and Switzerland should be using the same bands, but I can not get it to work. Any ideas?
I am stuck
flash
Hi there
Can i flash this version 059P6G1: RM-823 VAR EU NO CV CYAN
My original version is this 059P6K7: Nokia 900 RM-823 Country Variant United Kingdom GB V3 CYAN
-------------------------------------
Update
I flash it and everything is ok.
No BT share or any other goodies.
Only Start Screen
vangel161 said:
Hi there
Can i flash this version 059P6G1: RM-823 VAR EU NO CV CYAN
My original version is this 059P6K7: Nokia 900 RM-823 Country Variant United Kingdom GB V3 CYAN
-------------------------------------
Update
I flash it and everything is ok.
No BT share or any other goodies.
Only Start Screen
Click to expand...
Click to collapse
Did you simply download and flash? I cannot seem to get it to work as the number is different. :'(
Sent from my Lumia 900 using Board Express
Scottie, untick automatic product selection
Sent from my Lumia 900 using XDA Windows Phone 7.8 App
successfully updating my 900 to 7.8..mine is from Singtel Singapore..and no..my variant is not out yet..but i just flash it using Sweden variant and all i can say is everything work like a charm.. except theres no Bluetooth file sharing and ringtone maker yet..i think, its unfinished rom @[email protected] using Windows 8 x64.
Ps: anyone getting their Lumia not recognize by the NCS, try this:
1. Install the driver from Programfiles/nokia/nokia care suit/ driver..install everything, be sure for ur x86 or x64.
2. Restart windows.
3. Avoid using any USB 3.0 when connecting ur phone to ur PC/Laptop.
Edit: as i read on some others article, theres someone that said their 7.8 have the Bluetooth file sharing and ringtone maker..and most of them using India variant..but, too lazy to flash again xD anyone care to try? and i dont think theres a big diffrent between variant, well im using Singapore set and successfully flash using Sweden variant, so theres no big diffrent between each other and basically..u can used any variant you like, except if u are on at&t as their Lumias have an LTE which diffrent from all of us
All you need is the windows driver on the root of that drivers directory. I confirmed it today if your system is 64bit install that if it's 32 just install that one.
Sent from my Lumia 900 using XDA Windows Phone 7.8 App
norgan said:
All you need is the windows driver on the root of that drivers directory. I confirmed it today if your system is 64bit install that if it's 32 just install that one.
Sent from my Lumia 900 using XDA Windows Phone 7.8 App
Click to expand...
Click to collapse
hye there Norgan, u have Bluetooth file transfer on ur 7.8?
PS: after updating to 7.8, i tried to connect my Lumia to Zune, there appear some kind of weird problem. First, Zune give me an error which is " We can't connect you phone to the internet,but u still can manage/sync you phone to zune" and looks like zune can't recognize my Lumia storage anymore, the capacity and balance of my storage..just show 0.00..i unistall and install it back..now Zune give me diff error which is "Cant connect to your phone, disconnect it, restart it and Connect again". This just give me
Guys i have nokia lumina 900 window phone version 7.10(8779) at&t usa and its unlocked now....plz guide me to update its firmware to lastes (8858).....step by step or shall i use atf to change rm808 to rm823
mobileplazza said:
Guys i have nokia lumina 900 window phone version 7.10(8779) at&t usa and its unlocked now....plz guide me to update its firmware to lastes (8858).....step by step or shall i use atf to change rm808 to rm823
Click to expand...
Click to collapse
First of all please search before opening new thread, this question has been asked too many time..you can't yet flashig AT&T phone bcoz no variant support RM-808 as of now. AT&T device has an LTE connection which is different from RM-823 phone. even if you can change the product code, RM-823 variant don't have an LTE driver and will likely brick/no connection for call,sms,online your phone. All you can do right now is wait for RM-808 variant to come out. Nothing can be done.
More than that, while you can't change the product code. It's more than the code, it's the signature checked against the bootloader.
exiva said:
More than that, while you can't change the product code. It's more than the code, it's the signature checked against the bootloader.
Click to expand...
Click to collapse
+1 for this.
Dear all,
I have a Lumia AT&T with product code 059L6S0. It is now using custom rom 7.8 by china ( have XapDeployer and WP7 RootTools ). But when I come to Nokia Care suite to check, it display RM-823 ( Product code 059L6S0 must be RM-808 ).
Now, I dont know if my phone already has qualcomm bootloader and how to install another rom to have Facebook and Google in people hub ( China Rom doesnt include these features). If I use NCS to flash a ship rom AT&T from Nokia, will my devices will be relocked again ?
Thank you and best regards.
I could not find a thread to walk through being able to get my Dual Sim 950 to officially work on AT&T with VoLTE and other services (Enhanced LTE/HD Voice etc...). I searched many forums and threads to find a way to do this. I got tired of the lack of call quality and other quirks for my Lumia while on ATT. After accumulating several different pieces of information from multiple sources and places on the xda forum I was able to make it work. This is my first official post with the intention of it being a guide, offer tips if you want. Or if you see errors offer advice or suggestions if needed.
I am only posting this in the event someone else needs the information or wants to use it in some way. Messing with hidden partitions is risky and so if you brick your device using this thread, I'm sorry but I cannot help you. So if you choose to use these directions, use them at your own risk. I cannot be remote technical support. Thanks.
Here is how I got this to work.
Steps I used to convert NAM 950 DS RM-1118_13058 (059X5G2) to an ATT Lumia 950 (RM-1105_12716 059X4D9)
-1- First I flashed this specific original rom for my Dual Sim 950. I used the ffu located here.
-- thor2 -mode uefiflash -ffufile "RM1118_1078.0027.10586.13058.15358.030FF5_retail_ prod_signed.ffu"
-2- Second I manually pushed three cabs to my phone to alter the plat ID to Microsoft.MSM8992.P6218_ATT.1.0. All three were alone in the directory. Listed them below:
mmo.device_talkman_lte_americas.phone.plat_d20cefe ddb10fb6737b56fa966533783b1288e44.cab
mmo.base.variant.plat_55ce525fdf57ab0d614ada3517c3 4c84029f5437.cab
mmo.base.phone.plat_96ea6a2d24151eaf6299c342f81f49 997ca44137.cab
-- iutool.exe -v -p "C:\CABs\Your_Location-of-RM-1105_Plat-cabs"
-3- Third I did a full NVI flash and Reset with an ATT ROM. Link to location of ffu I used here.
FFU File used: RM1105_1078.0053.10586.13169.12716.035044_retail_ prod_signed.ffu
-- thor2 -mode uefiflash -ffufile "RM1105_1078.0053.10586.13169.12716.035044_retail_ prod_signed.ffu" -do_full_nvi_update -do_factory_reset
-4- Fourth I updated the product code. (Note: I never kept my phone on the ATT ROM long enough to see if this was really needed, but I suspected potentially an OTA update might revert it back to the Dual Sim variant.)
-- thor2 -mode uefiflash -ffufile RM1105_1078.0053.10586.13169.12716.035044_ret ail_prod_signed.ffu -productcodeupdate 059X4D9 -skip_flash
After it is finished while in this mode you can run thor2 -mode rnd -readdeviceinfo to check the device details also to verify the changes.
-5- Fifth I registered an imei of the att Lumia 950 I had to my ATT account to have ims registration complete.
Steps I used to convert back to NAM 950 DS RM-1118_13058 (059X5G2) from an ATT Lumia 950 (RM-1105_12716 059X4D9)
-1- First I flashed this specific ATT ROM. The one I used is located here.
-- thor2 -mode uefiflash -ffufile "RM1105_1078.0017.10586.13053.12716.02FBB4_retail_prod_signed.ffu"
-2- Second I manually pushed three cabs to my phone to alter the plat ID back to Microsoft.MSM8992.P6218.1.0. All three were alone in the directory. Listed them below:
mmo.base.phone.plat_8bab003dbd82a4acc5989f812a0dcd284eccfe43.cab
mmo.base.variant.plat_c7b2c481e64fe6a806f52df8f5f55c59fbb6a81e.cab
mmo.device_talkman_lte_row_dsds.phone.plat_d7303236cd88dda5a304701d5b59b0c2d5260d7c.cab
-- iutool.exe -v -p "C:\CABs\Your_Location-of-RM-1118_Plat-cabs"
-3- Third I did a full NVI flash and Reset with a NAM 950 DS ROM. Link to the ffu Iocation here.
FFU File used: RM1118_1078.0027.10586.13058.15358.030FF5_retail_prod_signed.ffu
-- thor2 -mode uefiflash -ffufile "RM1118_1078.0027.10586.13058.15358.030FF5_retail_prod_signed.ffu" -do_full_nvi_update -do_factory_reset
-4- Fourth I updated the product code back to the NAM Lumia 950 DS variant just in case.
-- thor2 -mode uefiflash -ffufile RM1118_1078.0027.10586.13058.15358.030FF5_retail_prod_signed.ffu" -productcodeupdate 059X5G2 -skip_flash
What helped immensely was being able to locate and find those cab files. They are added here for convenience. I found a thread posted here on the forums that helped a ton. Even if it was a cumulative effort, a thanks to @TristanLeBoss for posting it.
Thanks for your tutorial, OP.
In China most of us bought AT&T Variant Lumia 950 (RM-1105). However, the China Variant Firmware works best as far as I know.
Would you mind my repost it to Chinese Community?
hikari_calyx said:
Thanks for your tutorial, OP.
In China most of us bought AT&T Variant Lumia 950 (RM-1105). However, the China Variant Firmware works best as far as I know.
Would you mind my repost it to Chinese Community?
Click to expand...
Click to collapse
What model is the Chinese variant? Is it a RM-1104?
To delete.
In that case being both are dual sim, in theory these directions should work. But I'm not certain if the cabs are identical or if the directions could be improved for that model. In either case you're more than welcome to use what I found here.
Edit: Wait my mistake were talking about the lumia 950 here...RM-1116 Is the xl.
Update: If the Chinese model is also an RM-1118 I'm not sure how that will work since I converted my dual sim RM-1118 to the AT&T single sim. You need to go from an AT&T single sim to a dual sim ROM...I simply lost the ability to use my second sim slot.
To delete.
DilanChd said:
Not found a Chinese package for RM-1104 (Lumia 950) and for RM-1085 (Lumia 950 XL), even from multivariants packages. Just found for RM-1116 (Lumia 950 XL Dual SIM) and for RM-1118 (Lumia 950 Dual SIM). RM-1105 (Lumia 950) is excluded due to it's an exclusive AT&T hardware variant.
RM-1116 VAR APAC CN CV
059X4Z0 RM-1118 VAR APAC CN CV
In the past, I've flashed my Lumia 550 RM-1127 with a RM-1128 package (059X692 RM-1128 VAR NAM 4R CV) just with *.ffu file and full NVI update. So, flash *.cab files to modify Platform ID is specific to AT&T ?
Click to expand...
Click to collapse
Do the RM-1127 and RM-1128 have the same PlatformID?
The cab files in the RM-1105 folder allowed me to change the PlatformID of my Dual sim RM-1118 to match that of the AT&T variant. Only then I could flash the AT&T ROM to it.
To delete.
DilanChd said:
To be honnest, I hadn't carefull if the Platform ID matches beetween RM-1127 and RM-1128. But, I think they matches, because otherwise I would not have been able to flash so easily.
Yep, I know. You can see if Platform ID of RM-1118 matches with RM-1104 ?
Click to expand...
Click to collapse
I think the PlatformID matches between RM-1104 and RM-1118, but I'm not certain. Someone would need to verify that.
nate0 said:
I think the PlatformID matches between RM-1104 and RM-1118, but I'm not certain. Someone would need to verify that.
Click to expand...
Click to collapse
In Mainland China, Lumia 950 and 950 XL are RM-1118 and RM-1116. The code of 950 is 059X4Z0.
We have already tested RM-1116 China Variant Firmware on RM-1085 from Hong Kong or European countries even the prototype for Telstra in Australia, and RM-1118 China Variant Firmware Firmware on RM-1104 from Hong Kong and RM-1118 from US.
To delete.
I'll add also, that after flashing with the RM-1105 ROM I lost LTE band 17 but gained band 30.
The device also retained a device detail of TYPE being RM-1118 even though the product code and PlatformID were that of the RM-1105. You could see this using the device info command with thor2 or by going to Extras --> Advanced Info.
nate0 said:
I'll add also, that after flashing with the RM-1105 ROM I lost LTE band 17 but gained band 30.
The device also retained a device detail of TYPE being RM-1118 even though the product code and PlatformID were that of the RM-1105. You could see this using the device info command with thor2 or by going to Extras --> Advanced Info.
Click to expand...
Click to collapse
In China, we found it's possible to add another SIM slot on Lumia 950 RM-1104 and Lumia 950 XL RM-1085 bought from European countries or Hong Kong. After the modification and flash to China Variant Firmware, the second SIM slot works fine. The Typelabel is flashed along with VPL file, and the Typelabel doesn't change if you flash FFU only.
Because the China Variant Lumia 950/XL (RM-1118/1116) is much more expensive than other variant with only single SIM slot, Chinese resellers from Shenzhen have found a way to modify other variant of Lumia 950/XL into China Variant (RM-1105 AT&T Variant is not included right now).
BTW, my brand new Lumia 950 XL RM-1116 (Unlocked, Without Contract, China Variant) cost me 2,600 Chinese Yuan (About $376).
hikari_calyx said:
In China, we found it's possible to add another SIM slot on Lumia 950 RM-1104 and Lumia 950 XL RM-1085 bought from European countries or Hong Kong. After the modification and flash to China Variant Firmware, the second SIM slot works fine.
Click to expand...
Click to collapse
With this does that include a hardware modification?
Also, I'm curious and would like to know how popular Windows 10 Mobile is for China users?
Thanks.
nate0 said:
Whith this doess that include a hardware modification?
Also, I'm curious and would like to know how popular Windows 10 Mobile is for China users?
Thanks.
Click to expand...
Click to collapse
Yes it is. Here's how it works: http://bbs.wfun.com/thread-966790-1-1.html
You may need a translator, it's in Chinese but lots of pictures provided.
In China, only minor users use Windows 10 Mobile, most of users use Android Phone or iPhone. If I met someone who use Lumia Phone or other else (e.g. HTC One M8 for Windows, HP Elite x3), I'd get excited and talk to him or her.
Hey guys, glad to see someone released this. Just to add to the guide, I successfully did this a few months ago, however to add to the OPs offering, my initial findings also allows you to flash a single sim rom to a DS*phone, along with a DS rom to single sim phone, however the main problem is that most of the update settings will not take affect because of the modem flashing is done in a way that the phone retains it on a separate partition on the phone that we don't have access too. The nvi flashing from a rom that is not native to the phone doesn't seem to flash or retain onto the phone. However this will definitely enable users to get raid of the ATT stock stuff. Something to also be extremely cautious too is that when using WDRT it sometime will not recognize the phone product code to recover and/or it will reflash the "stock" product code rom that was on the original phone, even if you updated the productcode throught thor2.
anubis23 said:
Hey guys, glad to see someone released this. Just to add to the guide, I successfully did this a few months ago, however to add to the OPs offering, my initial findings also allows you to flash a single sim rom to a DS*phone, along with a DS rom to single sim phone, however the main problem is that most of the update settings will not take affect because of the modem flashing is done in a way that the phone retains it on a separate partition on the phone that we don't have access too. The nvi flashing from a rom that is not native to the phone doesn't seem to flash or retain onto the phone. However this will definitely enable users to get raid of the ATT stock stuff. Something to also be extremely cautious too is that when using WDRT it sometime will not recognize the phone product code to recover and/or it will reflash the "stock" product code rom that was on the original phone, even if you updated the productcode throught thor2.
Click to expand...
Click to collapse
I am now curious if this type of scenario of applying a PlatformID change works for the XL model Any thoughts?
The reason I bring this up, and also strike my curiosity would be all the *8994*.dll and other files included on the 950 FFUs along with the 8992 files. Is the common theme between the xl and non-xl model? If so what purpose does that serve? Thanks.
Hey guys, I want to do this with my Lumia 950 XL Dual Sim (059X4S4) en convert it to single sim (059X4X5). Does anyone have the .CAB files needed to change the Platform ID or know where I can get them? I can't find them anywhere.
JoostL said:
Hey guys, I want to do this with my Lumia 950 XL Dual Sim (059X4S4) en convert it to single sim (059X4X5). Does anyone have the .CAB files needed to change the Platform ID or know where I can get them? I can't find them anywhere.
Click to expand...
Click to collapse
Most if not all Lumia FW are stored here. The one I pasted includes ffu's for 059X4X5. The PLAT ID change is only needed for certain Carrier variant device ROMs. I do not think you need to change the Platform ID for moving from the 059X4S4 product ROM to the 059X4X5 SS product ROM.
Thanks! I did indeed come across that website but I thought I also needed to change the PLAT ID.
I successfully flashed my 950XL with the 059X4X5 ROM.