Hey!
My Nexus's Earphone hole is going broken and I don't want so sent my Nexus to the phone service and to pay 80€ of repairing it..
So I bought Nokia BH-111 Stereo Bluetooth headset! Earphones are good but when I plug them to its BT device and listening music from it via Nexus the sound quality is "HORRIBLE", I hear clicking/crackling noise.
I installed DSP manager and its files which is needed and then I tested it but still horrible sound quality..
I'm using my modified OTA ROM (JB 4.2.1), without any "Audio Mods".
I have no idea how to fix the quality or to increase the quality, so if anybody can help then Thanks!
manumanfred said:
Hey!
My Nexus's Earphone hole is going broken and I don't want so sent my Nexus to the phone service and to pay 80€ of repairing it..
So I bought Nokia BH-111 Stereo Bluetooth headset! Earphones are good but when I plug them to its BT device and listening music from it via Nexus the sound quality is "HORRIBLE", I hear clicking/crackling noise.
I installed DSP manager and its files which is needed and then I tested it but still horrible sound quality..
I'm using my modified OTA ROM (JB 4.2.1), without any "Audio Mods".
I have no idea how to fix the quality or to increase the quality, so if anybody can help then Thanks!
Click to expand...
Click to collapse
I had the same issue when streaming bluetooth to my subaru's car stereo.
The fix for me was to decrease the "bluetooth" volume on the phone itself when connected to a bluetooth device. It's as if the device's onboard audio board distorts at full blast/volume. I step it down 2-3 notches and it sounds a lot better. Then, just increase the volume on the stereo or headset to compensate.
akira02rex said:
I had the same issue when streaming bluetooth to my subaru's car stereo.
The fix for me was to decrease the "bluetooth" volume on the phone itself when connected to a bluetooth device. It's as if the device's onboard audio board distorts at full blast/volume. I step it down 2-3 notches and it sounds a lot better. Then, just increase the volume on the stereo or headset to compensate.
Click to expand...
Click to collapse
Doesn't make quality better on my Nexus when decreasing volume...:/
I also have old Nokia Bluetooth headphones which are broken and the sound is same with them.
Would be nice if there is any fix for A2DP quality on Nexus or any audio mods which makes sound quality better.
The older (pre-4.2) bluetooth stack had issues with more than one device connected (aka stereo and headset). Not sure if the new one in 4.2 is any better in that regard.
Edit: deleted..
Also I think I fixed it somehow with some CM's BT files!
manumanfred said:
Edit: deleted..
Also I think I fixed it somehow with some CM's BT files!
Click to expand...
Click to collapse
I'd love to know what you did to fix this. I've been red in the face over this bluetooth noise during hands-free since the ICS update.
I just posted this:
http://forum.xda-developers.com/showthread.php?p=38118795#post38118795
Flapjack said:
I'd love to know what you did to fix this. I've been red in the face over this bluetooth noise during hands-free since the ICS update.
I just posted this:
http://forum.xda-developers.com/showthread.php?p=38118795#post38118795
Click to expand...
Click to collapse
Well, It is fixed in 4.2.2 release! So I recommend you to use JB 4.2.2
I replaced files in /system/etc/bluetooth/ and audio_policy file in /system/etc/ audio_ploicy.conf looked to be same but just in case I replaced it..
The Sound quality via BT headset isn't still perfect but it's better now.
manumanfred said:
Well, It is fixed in 4.2.2 release! So I recommend you to use JB 4.2.2
I replaced files in /system/etc/bluetooth/ and audio_policy file in /system/etc/ audio_ploicy.conf looked to be same but just in case I replaced it..
The Sound quality via BT headset isn't still perfect but it's better now.
Click to expand...
Click to collapse
Not fixed for me.
What exactly has changed? Is it the radio, kernel, bluetooth stack, what?
Where did you get the files you used from? One of the first things I did after flashing the 4.2.2 ROM, kernel, and binaries, was to flash the latest radio (for Verizon it's 4.1.1) and the noise was there, in all its glory. I put the 4.0.4 radio back on, which is better... but it has its own problems. 4.1.1 is a much better radio, but has the BT racket in calls.
Flapjack said:
Not fixed for me.
What exactly has changed? Is it the radio, kernel, bluetooth stack, what?
Where did you get the files you used from? One of the first things I did after flashing the 4.2.2 ROM, kernel, and binaries, was to flash the latest radio (for Verizon it's 4.1.1) and the noise was there, in all its glory. I put the 4.0.4 radio back on, which is better... but it has its own problems. 4.1.1 is a much better radio, but has the BT racket in calls.
Click to expand...
Click to collapse
The Bluetooth audio streaming is fixed, about other things I don't know because I use BT Headset at school for listening music and calling and everything works well..
On JB 4.2.1 I used files from CyanogenMod's latest nightly, CyanogenMod devs has fixed A2DP on CM ROMs..
manumanfred said:
The Bluetooth audio streaming is fixed, about other things I don't know because I use BT Headset at school for listening music and calling and everything works well..
On JB 4.2.1 I used files from CyanogenMod's latest nightly, CyanogenMod devs has fixed A2DP on CM ROMs..
Click to expand...
Click to collapse
Gonna have to dig into that. You said you updated two sets of files? Could you list which ones?
Flapjack said:
Gonna have to dig into that. You said you updated two sets of files? Could you list which ones?
Click to expand...
Click to collapse
All files from /system/etc/bluetooth/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Permissions:
If you want then replace audio_policy.conf from /system/etc/
manumanfred said:
Hey!
My Nexus's Earphone hole is going broken and I don't want so sent my Nexus to the phone service and to pay 80€ of repairing it..
So I bought Nokia BH-111 Stereo Bluetooth headset! Earphones are good but when I plug them to its BT device and listening music from it via Nexus the sound quality is "HORRIBLE", I hear clicking/crackling noise.
I installed DSP manager and its files which is needed and then I tested it but still horrible sound quality..
I'm using my modified OTA ROM (JB 4.2.1), without any "Audio Mods".
I have no idea how to fix the quality or to increase the quality, so if anybody can help then Thanks!
Click to expand...
Click to collapse
I'm now on a 4.2.2 Rom (Carbon). I still had a few problems even on this, but changed some settings I've used for awhile in Trickster Mod. I always enabled High Performance Sound, but disabled this feature. Sound quality is was better, and the playback controls on my BT headphones work again (first time since 4.1). Also had some crackling and playback stop affecting google play music which have gone away as a result.
clearyt1 said:
I'm now on a 4.2.2 Rom (Carbon). I still had a few problems even on this, but changed some settings I've used for awhile in Trickster Mod. I always enabled High Performance Sound, but disabled this feature. Sound quality is was better, and the playback controls on my BT headphones work again (first time since 4.1). Also had some crackling and playback stop affecting google play music which have gone away as a result.
Click to expand...
Click to collapse
OK!
I flashed CM10.1 latest Nightly to my nexus and I test later hot BT headset works with it.
but first I gonna modify some things e.g. to enable multi user..
KushET said:
nice thread
Click to expand...
Click to collapse
manumanfred said:
OK!
I flashed CM10.1 latest Nightly to my nexus and I test later hot BT headset works with it.
but first I gonna modify some things e.g. to enable multi user..
Click to expand...
Click to collapse
Sweet. Keep us up-to-date!
Sent from my Galaxy Nexus using Tapatalk 2
Flapjack said:
Sweet. Keep us up-to-date!
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Well, on CM10.1 the quality is amazing but CM is not for me so I use again my ROM.
Related
Update: Kernel driver source is also released now!
for Kernel and App developers: https://github.com/project-voodoo/sound_kernel_patches
Full Kernels repositories: https://github.com/project-voodoo
Models supported in sources: GT-I9000, Captivate, Vibrant, Epic 4G, Fascinate, M110S, Galaxy Tab and Nexus S!
GT-I9003 board and audio hardware are entirely different and not supported.
28/03/2011 : 5.5.3 release: includes Voodoo sound v7 :definite fix for the DAC direct call issue with much better audio path management, lagfix code updated.
21/03/2011 : 5.5.1 release: includes Voodoo sound v6 (fixes reported by some users muted earpiece during calls with DAC direct option enabled: proved inefficient)
17/03/2011 : 5.5 release: includes Voodoo sound v5 and a new kind of 16GB Galaxy S.
02/03/2011 : 5.4.2 maintenance release added support to Samsung Froyo 2.2, Ext4 conversion for some new Spanish 8GB phones.
31/01/2011 : 5.4.1 release: added missing cifs.ko
31/01/2011 : 5.4 release: includes Voodoo sound driver version 4!
27/01/2011 : 5.3 release
FROYO kernels:
Flash with ClockWorkMod recovery or SGS Kernel Flasher App (available in Market - needs root)
Voodoo-stable-5.5.3-Froyo-GT-I9000-unsigned-update.zip
Flash with Odin or Heimdall.
Voodoo-stable-5.5.3-Froyo-GT-I9000-odin-pda.tar
Note: This Kernel is the reference implementation for Galaxy S GT-I9000 (will work also on GT-I9000M GT-I9000T). Other Galaxy S variants will have issues or won't boot.
It also contains the usual stable Voodoo lagfix, and ClockWorkMod as default recovery.
If you don't know how to flash kernels, I recommend the community written guide, updated by Eitam Doodai
Don't forget to support my development effort so I can continue working hard on it
You can also take a look at an additional list of potential features
Other kernels implementing Voodoo sound:
You'll find plenty of other kernels implementing Voodoo sound for your device in this forum
"Voodoo Control" in market screenshots:
A few countries miss Market, so I put also a download link. Downloading through market is still strongly recommended if you can:
http://dl.project-voodoo.org/apps/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FAQ:
How to get the best sound quality ?
The best quality for headphone is obtained:
1/ by setting the Android digital sound level to the maximum or close to it
2/ then using the new analog level to choose the sound pressure that suits your needs
This way, you will get the lowest hiss, best signal-to-noise ratio and lowest distortion.
Original post:
Hello
My first bounty, lagfix is a success so here I am again!
Galaxy S line phone have a few sound issues and as a sound junkie I'm working on improving things with Voodoo sound
Here is what I'm implementing for the first Voodoo sound release:
Headphone amp analog gain:
Reduce the hiss or give you a much louder output. Configurable from very low levels to very high.
Already tested with sensitive in-ear very prone to hiss and brilliantly confirmed with Sennheiser high-end 300 Ohms headphones.
Hardware Parametric equalizer:
Change the frequency response to correct your headphone deficiencies or to adjust the sound how you like. Use 0 battery and work on every sound source. 100% configurable
Hardware 3D effect:
Finally, a good specialization effect. Can improve sound-stage if used wisely. Configurable.
Here is the link to Voodoo sound source repository if you are curious about it.
Click to expand...
Click to collapse
Those are new features, exciting capabilities your phone didn't had before
Galaxy S phone is at the top of the line about sound capabilities because it uses a high end Wolfson WM8994 sound codec.
That's why it's worth it.
I receive already a lot of a few feature asking to fix things, and it's not what i intended to do.
If you have a feature request or suggestion please
explain it in this topic
tell how much you can support the dev effort.
I can be crazy features request. Who knows, sometimes crazy stuff can be done
Then I'll do my best to work on it and you'll vote with donations if you are satisfied with it.
Click to expand...
Click to collapse
Your turn!
Good luck curio!! Thanks again for the wonderful work on #project-voodoo.
You already know my feature request - my Sennheisser iphone headset working again on the Galaxy S would be awesome. From what I read, here http://forum.xda-developers.com/showthread.php?t=713350 the ground and mic is reversed on iphone headsets which keep them from working on Galaxy S - if they can be remapped internally, I'd presume it works.
Will be sure to donate some $ if that happens or if in fact i like the difference i hear on what comes off these changes. Good luck again!
PS: $15 for the headphone fix AND an indeterminate $ for how much I like the other changes
Possible ideas:
1) Change headphone-out to line-out
2) use headphone jack for spdif to go 3.5mm mono out on phone to coax in on external dac -> send up to 24/96 to external dac
$25 per item
good work
A louder speakerphone and earphone.
I can't wait for beta 5. It will blow us away!!!
how about an Equalizer in the ringtone?? So I can choose "Music Clarity" profile for my ringtone, I don't need heavy bass for my ringtone
Any app can do it (Eg. rings extended app which allows you to select ur own mp3 as ringtone)
Heyho! There's something that has been bugging me all the time. It's the sensitivity of the built in microphone. For example if you record videos in a very loud environment (like concerts for example) you only hear noise on playback. Is there any way for auto adjustment of the mic sensitivity, or at least a way to do this manually?
I would donate 15$ for some fix for this issue
Sent from my GT-I9000 using Tapatalk
One sound related issue that always annoyed me is that the sound seems to work in the old OSS way, that is only one application may give sound at one. For instance, if you listen to music and you get a SMS, then the music is paused while the notification is playing.
is it possible to make them play simultaniously?
crossbone85 said:
Heyho! There's something that has been bugging me all the time. It's the sensitivity of the built in microphone. For example if you record videos in a very loud environment (like concerts for example) you only hear noise on playback. Is there any way for auto adjustment of the mic sensitivity, or at least a way to do this manually?
I would donate 15$ for some fix for this issue
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
+1
I had to delete a lot of videos which I made on a concert because the sound was completely distorted. The mic is definitely too sensitive.
Lineout
£25 for a switchable headphone out and "true" lineout" from headphone jack.
You're my hero.....
KhaaL said:
One sound related issue that always annoyed me is that the sound seems to work in the old OSS way, that is only one application may give sound at one. For instance, if you listen to music and you get a SMS, then the music is paused while the notification is playing.
is it possible to make them play simultaniously?
Click to expand...
Click to collapse
+1
10char
One thing really pissed me is that whenever I use 3G for exp: surf web or update apps in market.
My westone always gives me a static noise similar to when you have a phone call near the speaker. But if I switch to a cheap earphone this go away. I want to use my fav ear phone on my sgs . 15 bucks for a fix. Thank you
And by the way my sgs sound a bit too loud not too soft like others :-?
Sent from my GT-I9000 using XDA App
crossbone85 said:
Heyho! There's something that has been bugging me all the time. It's the sensitivity of the built in microphone. For example if you record videos in a very loud environment (like concerts for example) you only hear noise on playback. Is there any way for auto adjustment of the mic sensitivity, or at least a way to do this manually?
I would donate 15$ for some fix for this issue
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
+2
€15.00 (already promised another €10.00 from before developments of Voodoo Sound.. so +€5.00 for this feature)
How about sorting out A2DP? Audio streaming is absolutely useless on this (and from what I can tell quite a few Android devices).
I'd be more than willing to donate £15
Florida.
eeyunopper said:
£25 for a switchable headphone out and "true" lineout" from headphone jack.
You're my hero.....
Click to expand...
Click to collapse
+1 line out option
£5 gbp bounty from me
I really don't mind the current loudness of the volume. I think the limits are there for a reason, but of course I would support any work done to improve the quality of the audio
Would it be possible to transfer calls to the media/ringer/notifications output so that the headphones can hear it?
God curio's at it again. But seriously, we can't thank you enough for voodoo lag fix and I now can't wait for voodoo sound! The Galaxy S' audio just isn't up to the standards it should be..
make it so the audio of a phone call comes through the headphones. when i plug my phone into my car via 3.5mm jack for listening to music it's fine. but when a call comes through, the call plays through the handset (and not on speaker phone either).
$15
Moving On?
supercurio said:
Hello
My first bounty, lagfix is a success so here I am again!
Click to expand...
Click to collapse
Hi Curio,
I think you have done a phenominal job on the Lagfix Ext4 Data Conversion, but I'm not convinced that it's completely optimized or "fixed".
Heres why:
I use Touchdown with exchange among a few other Database stuff, and i still see a lot of lag on this device when using these apps.
I'm not sure what folder is used for Touchdown(probably Database) but there is still much lag there. If some apps use folders other than the Data Folder we still have some lag... Do you agree?
When you converted to EXT4 it was only the Data Folder correct? Is this the only directory able to be converted? Dont our apps use other directoryies?
When I used the ext2 fix(Briefly) I believe there were three or four folder converted. Doing this fixed the lag completely on my phone, but I agree with you that it's not the safest filesystem after my research.
So, my question, Why cant you do the same EXT4 Conversion for several other folders that are important to IO "Read" and "Writes"
Is there some stability or issues with doing this?
By the way,
If you could fix the sound issues on my phone, I'd have 50 dollars for you the same day.
Take care and Great Work!
STOP THAT BLOODY "HEY I'VE CHARGED" NOTIFICATION AT 3AM !!!!!
as you may have noticed this winds me up a bit, having elderly folks putting the phone to silent at night is not an option
Hi,
I just picked up a pair of Jabra Sport Bluetooth headphones and I have to say the sound quality isn't great, sound goes up and down only just enough to annoy.
I didn't know if there is a fix for bluetooth audio or some sort of issue, any help would be great......
Currently running
ARHD 21.0 base 3.20
Laypota Mod pack
Poweramp (have tried in other music apps, sound is the same)
Thanks
Graham
well, maybe it is a issue of the rom... you should try also not to apply any mod and see if this works
matt95 said:
well, maybe it is a issue of the rom... you should try also not to apply any mod and see if this works
Click to expand...
Click to collapse
I am going to try a wipe and reinstall ARHD with no mods.
I will let you know the result.
Thanks
Graham
DISCLAIMER: I WILL NOT BE RESPONSIBLE IF YOU GO DEAF OR BREAK YOUR HEADPHONES SIMPLY BECAUSE YOU DID NOT READ THE OP OR BOTHER TO FOLLOW INSTRUCTIONS!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features ONLY in XPERIA Z1 mod version:
-New Audio effects/presets (PureXHiClarity/PureXPsychoRealism/PureXBeats)
-Sony Digital Sound Enhancement Engine ported from Walkman NWZ-F805 (EXCLUSIVE TO PXA, STRONGLY ADVISE TO TURN DOWN VOLUME BEFORE ENABLING)
-Disabled Hearing Protection
-Slightly louder speaker, earpiece and headphone volume
-Improved ALSA with many plugins and custom configs
-32Bit Unsigned Integer Quantization
-256x SuperClock Frequency Audio Upsampling Quantization (11.6MHz)
-More Anti-Aliasing
-Even less static noise
-Improved audio resolution
-No Audio clipping
-ALSA which AUTO CONFIGS settings for your audio chip
-Re-Introduced ClearAudio and VPT Wrapper from Xperia V ICS firmware
-Qualcomm Audio mode set to FluencePRO
-Enabled Qualcomm Surround-Sound recording
-Wider and Clearer Soundstage
-Ultra Clear High Frequency treble
-Crystal Clear vocals and background vocals
-Alive, beating drums
-Less Distortions
-More Dynamic Range
-Very low audio latency
-System Wide modification - You don't need to press anything to turn it on
-New and powerful audio libraries
-NOT BLOATED WITH USELESS FILTERS AND FILES
-Re-Enabled AudioPreProcessing features (Automatic Gain Control, Noise Suppressor and Acoustic Echo Cancelling)
Click to expand...
Click to collapse
Special PowerAmp PureX+ Presets:
PureXPsychoRealism+ - Just like PureXPsychoRealism; this preset enhances bass effectively (Increased 30Hz - 60Hz bands), enhances treble by increasing 16k band and 8k whilst keeping clarity by reducing 500k, 1k and 2k bands. This is a more precise version of normal PureXPsychoRealism.
General Audio Effects (Equalizer presets only in Sound Enhancements):
PureXPsychoRealism - Experience realistic audio, rich deep bass and realistic acoustics. Best acoustics and bass you will ever hear. (This is best used on Headphones)
PureXHiClarity - Listen to Clarity like never before, from Ultra high frequencies to crystal clear vocals. This is clarity at it's best. (This is best used on earphones)
PureXBeats - Optimized and fine-tuned for Beats by Dr Dre headphones/earphones. Get rid of that terrible 'muddy' sound beats headphones/earphones produce by too much bass, hear more clarity in your Beats headphones/earphones.
Common Effects:
PureXDynamics is a more effective way to minimize volume differences (Like the Dynamic Normalizer) Acts like a audio limiter, it's a more safer way to listen to audio as it softens the other instrument volumes down so that every instrument can still be heard.
Speaker Effects (System-Wide when enabled):
PureXIntenseBLAST - Greatly enhance audio volume of internal speaker (Modded version of xLOUD)
PureXHiFi - Greatly enhance audio quality of internal speaker (Modded version of ClearPhase)
Don't be fooled by your Settings saying ClearPhase and xLOUD in sound settings still, they are just the names, they will still produce the exact same effect as the two above but it is renamed in Walkman Sound Enhancements however
If you are using the phone in a different language OTHER than English, please note that User-Defined 1 is PureXPsychoRealism, User-Defined 2 is PureXHiClarity and Custom is PureXBeats
These effects can all be enabled through Sony Walkman Sound Enhancements.
Click to expand...
Click to collapse
NOTE: DO NOT INCLUDE ANY OF THE MODS IN THIS THREAD IN ROMS WITHOUT MY PERMISSION! I WILL ONLY ASK ONCE, IT IS MANDATORY THAT YOU PM ME OR NOTIFY ME BEFORE YOU PUT THIS IN YOUR ROM OR OPEN ANOTHER THREAD SOMEWHERE ELSE ON XDA,LAST WARNING. ANY THREADS OPENED WITHOUT LETTING ME KNOW WILL BE REPORTED IMMEDIATELY!
NOTE 2: It SHOULD work with all Xperia Firmware-Based ROMs, not so sure about AOSP roms as I have a lock bootloader and therefore I cannot try them out. Please do not constantly ask if it will work for a specific rom, Try before you ask.
NOTE 3: PLEASE! FOR YOUR OWN SAFTEY, MAKE A NAND BACKUP FOR YOUR ROM! I WILL NOT BE GIVING INSTRUCTIONS TO UNINSTALL.
NOTE 4: This mod will work for Locked/Unlocked Bootloaders as long as you have a custom recovery.
NOTE 5: The speaker's audio quality becomes worse as you increase volume, this is because our speaker cannot output good audio quality at loud volumes.It is impossible to keep audio quality and loud volume because of out hardware. The HTC One has a dedicated Amp inside it's chipset which amplifies audio better with more sound, that is why new HTC phones can have very loud speaker volume with good speaker audio quality.
NOTE 6: Sometimes, if you play music, it could take a few seconds to let Sound Enhancements load your settings (This is normal)
NOTE 7: If you are on another device and is using Xperia Z version (The updated version of this soundmod and not PureXAudioLITE) Don't be mistaken that all features work, because it just won't. My audio mod is specifically made for the APQ8064 chipset and WCD9310 DAC (MPQ8064 audio too) the features will not ALL work because every device has different hardware/software, even if it install fine, not all features will work. Don't get confused.
NOTE 8: I advise everyone to go onto XZDualRecovery as it's the only recovery (As I am aware of) which has native init.d installed directly in it's ramdisk just so you can use the init.d scripts in my mod. (Only applies to locked bootloaders)
NOTE 9: If you are having audio skipping issues, make sure that you exclude: Walkman (If you have 2 Walkman apps, select the second one), PureXAudio Engine and MusicFX in STAMINA Mode so that the phone will not try and make it inactive. If you have Skipping in any other music player, add that in the exclude list of Stamina mode.
NOTE 10: Hearing impairment is caused by volumes higher then 85dB as stated in Wiki "If one is exposed to loud sound (including music) at high levels or for extended durations (85 dB A or greater), then hearing impairment will occur." If you feel uncomfortable when hearing music, I strongly advise you to either turn down the volume or have a rest.
About SRS/DTS Audio: http://forum.xda-developers.com/show...postcount=2131
Click to expand...
Click to collapse
How to install video thanks to ashwin123:
http://www.youtube.com/watch?v=kZ64LfByCVU
Download:
PureXAudio v3
Click to expand...
Click to collapse
Code:
v3- Huge Cleanup now only 10Mb
Possible fix for dock speakers to work
v2 - Compilance with honami's DAC
Deleted apps and permissions which are not used ( as we are up-to-date)
removed asound.conf for now
v1 - Intial Release Straight Port From Xperia Z
Many thanks to Windows X for helping me and contributing to this sound mod!
Special thanks to Jonas2295 for making this epic banner!
Many thanks to aznrice2k4 for being a great friend, letting me use his custom audio files and helping me out a lot of times!
Sony for ClearAudio+, ClearBASS and VPT Surround Sound
Google for basic android audio libraries/files
CBagwell and Robs for SoX
aleidinger, bouvigne, robert, takehiro for MP3 LAME Codec
Click to expand...
Click to collapse
Reserved for future use...
P.S Nice job!
things get serious
yeah...the best audio mod for Z now in z1 ...i read the op, but i don't undertand if the xloud volume and the outputs volume is increase with the mod
p.s. we can't flash it without working recovery on locked bootloader
fer2503 said:
yeah...the best audio mod for Z now in z1 ...i read the op, but i don't undertand if the xloud volume and the outputs volume is increase with the mod
p.s. we can't flash it without working recovery on locked bootloader
Click to expand...
Click to collapse
Just wait for it
Doom is working on it
Sent From My Vanir guy across the street
fer2503 said:
p.s. we can't flash it without working recovery on locked bootloader
Click to expand...
Click to collapse
recovery works fine only 40 seconds. its more then enough to install this mod
Desperanto86 said:
recovery works fine only 40 seconds. its more then enough to install this mod
Click to expand...
Click to collapse
That's good to hear
I'll fix the Sound Enhancements soon
Sent from my C6902 using XDA Premium 4 mobile app
I have to re-write the whole OP again tomorrow
Sent from my C6902 using XDA Premium 4 mobile app
MightyBear007 said:
That's good to hear
I'll fix the Sound Enhancements soon
Sent from my C6902 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
just clean update script and keep only usefull code to minimize installation time
I
Desperanto86 said:
just clean update script and keep only usefull code to minimize installation time
Click to expand...
Click to collapse
Its short tbh
Sent from my C6902 using XDA Premium 4 mobile app
Downloaded and flashed it ...but..
Sound enhancements are not working, when in settings under sound sound enhancements dont open at all
In walkman mode sound enhancements also dont open
Plus, it says in the OP that the overall sound coming out of the internal speaker has been increased but again, I did not feel any difference at all, please make this happen since as always internal speaker of the Z1 also is very weak therefore please, increased sound from the internal speaker for ringtones and notifications and increase sound from the in-call speaker greatly will be really nice...
Also, upload the stock sound file in CWM flashable format as well so if anyone wants to go back to stock...I know backup restore from TB should haven been done or backuy CWM or TWRP but I did not do any of those ... CWM & TWRP will reboot after 40 seconds so no use in making a backup for now, plus since my 64GB card is on its way I have not made any TB backups now.. So having a stock sound .zip file will help very much to me and to some other users also...
Hopefully these issues will be solved in the next update..cant wait...
As with all these mods there should be a health warning in the OP that the only way to go back to stock is via a nandroid backup or a clean reinstall of the rom. These sound mods change so many files its next to impossible to manually go back yourself with out a backup.
I know this does not help you, but I hope others will read this and take the backup.
gregbradley said:
As with all these mods there should be a health warning in the OP that the only way to go back to stock is via a nandroid backup or a clean reinstall of the rom. These sound mods change so many files its next to impossible to manually go back yourself with out a backup.
I know this does not help you, but I hope others will read this and take the backup.
Click to expand...
Click to collapse
Yeah hope so .. anyways all i can do now is wait for the new version which has increase in sound from internal + in-call volume speaker (like it was there for Xperia Z) and also have the sound enhancements settings working
jagdesh said:
Yeah hope so .. anyways all i can do now is wait for the new version which has increase in sound from internal + in-call volume speaker (like it was there for Xperia Z) and also have the sound enhancements settings working
Click to expand...
Click to collapse
I will release v2 today
With fixed Sound Enhancement
It was a straight port from Xperia Z
It takes time to settle
Sent From My Vanir guy across the street
MightyBear007 said:
I will release v2 today
With fixed Sound Enhancement
It was a straight port from Xperia Z
It takes time to settle
Sent From My Vanir guy across the street
Click to expand...
Click to collapse
Great Thanks a lot buddy, V2 will help me since i am without backup for sure...
and lets hope the V2 will have louder sound from in-call speaker and internal speaker...
jagdesh said:
Great Thanks a lot buddy, V2 will help me since i am without backup for sure...
and lets hope the V2 will have louder sound from in-call speaker and internal speaker...
Click to expand...
Click to collapse
No problem
I know a way to fix it via Flashtool
Just flash the system partition once again
If you want stock
Sent from my C6902 using XDA Premium 4 mobile app
MightyBear007 said:
No problem
I know a way to fix it via Flashtool
Just flash the system partition once again
If you want stock
Sent from my C6902 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I guess this is the only way for now until Doomlord fixes the 40 seconds reboot in recovery ... once thats fixed then only we all will be able to perform Nandroid Backup...
i am not making any apps tweaking yet
i need to bring Zero's presets into Walkman somehow
but for that we gotta be deodexing the whole ROM
Now we should have Walkman working as it should
MightyBear007 said:
Now we should have Walkman working as it should
Click to expand...
Click to collapse
Just installed the V2
Used TWRP to flash first
- After booting, in settings the sound effects are still not responding, meaning I when click on sound effects nothing happens
- In walkman, in settings the sound effects are also not responding
- In google music player, when I click on settings and goto sound effects it opens, but when I goto EQ settings and select any new EQ the EQ sliders does not move at all they all remain at Zero which is right in the middle.
Used CWM to flash and same thing as above for settings, walkman, google music player.
So V2 is not working for me either...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"Feel da' Sound "
In collaboration with:
And
Hi everyone,
I present to you Terr-A-udio Mod,
This is an audio/sound mod for any enthusiasts out there who want crisper and louder audio on their HTC One (M7).
(Thats running sense 7-6 (maybe even further back... you tell me)) This will work on aosp, cm, aokp, etc.
But for a better audio experience ON NON-SENSE ROMS try out androidexpert35's audio mod HERE.
FYI - Try out viper4android!!! Its a great audio controller/modification and makes all the difference.
Requirements:
S-Off or HTC Dev unlocked bootloader
Lollipop Sense 7 or Sense 6 (and possibly further back)
Works on sprint variant, not sure about others but it should work on all other variants.
Disclaimer
By flashing this mod you agree to take full responsibility for any damages to your device, life, or pet rock.
Features:
Code:
CURRENT:
Xloud Audio Libs
Harman Kardon Audio Libs
More Audio lib mods.
More Audio Processing tweaks and build.prop tweaks
Soon to come:
IntenseBLAST
Atmos
Downloads:
https://basketbuild.com/devs/CurbThePain/HTC One M7/Terr-A-udio
Contributors:
androidexpert35
ZeroInfinity
Teaser Section for upcoming releases:
Update 1.2 Alpha2: We will now be integrating IntenseBlast in this audio mod to increase the volume output of your built in speakers.
We also have FULL harmankardon audio on the cutting block right now and it may be approved by sun_dream soon here, just have to wait and see.
UPDATE: Basket build is down. Until it is restored or I can find the zip I cannot update unless I rebuild this from the ground up.
?
Sent from my SM-G925F using Tapatalk
Great
Random reboots on ViperOne v9.0.0
Toast-Brot said:
Random reboots on ViperOne v9.0.0
Click to expand...
Click to collapse
More info please, Varient, S-on/S-off, When playing music? If so put a logcat up, Isn't v9 an m9 port? May have issues since the mod is made for sense 6 m7
Toast-Brot said:
Random reboots on ViperOne v9.0.0
Click to expand...
Click to collapse
Take a logcat i cant test viperone as 9.0.0 doesnt work for me no matter what i do. I've seen some dolby stuff in viper though so i think that may be the reason.
liam_davenport said:
More info please, Varient, S-on/S-off, When playing music? If so put a logcat up, Isn't v9 an m9 port? May have issues since the mod is made for sense 6 m7
Click to expand...
Click to collapse
This mod was made and tested on nusenseven so it should in fact work on any sense ROM just so long as there are no conflicts such as AudioFX or any other dsp's. With an exception of Viper4Android. If i had to take a guess on the reboots I've seen Dolby references in viper-one so that's probably the issue. Ill have to look into it.
So how do i activate this? I just flash and turn beats on in settings?
Does it affect speakers/headphones/BT?
shpitz461 said:
So how do i activate this? I just flash and turn beats on in settings?
Does it affect speakers/headphones/BT?
Click to expand...
Click to collapse
It is all system wide auto activated, intenseBLAST is the next thing to be integrated and it will be activated by switching beats audio on.. intenseBLAST basically boosts volume on your phones speakers. nothing here is controllable basically.
I can't wait for IntenseBlast + Dolby.
I have to do a clean install of my ROM, but I'll wait until you publish your update with these features (so I can switch from Dragon-Fi to this one)
Me too
Sent from my HTC One using XDA Premium 4 mobile app
If harmon kandon is truly working with this mod then ill be the happiest guy in the world
Maik268 said:
I can't wait for IntenseBlast + Dolby.
I have to do a clean install of my ROM, but I'll wait until you publish your update with these features (so I can switch from Dragon-Fi to this one)
Click to expand...
Click to collapse
I'm working on getting a Dolby gui but currently I have nothing in terms of Dolby other than the audio pre-processing and a notification. Harman Kardon is also not as noticeable as on the m8 because its only the base pre-processing and not the whole audio filter. Basically this is going to be a base line mod with a hand full of pre-processing mods, a notification for Dolby, and intense blast to make your phones speakers louder. Sorry for the delay, I'm in the midst of modifying a gpu bios for my Geforce GTX 680 (which includes lots and lots of stability tests). Ill be putting up a link asap with the updated 1.1 zip.
CurbThePain said:
I'm working on getting a Dolby gui but currently I have nothing in terms of Dolby other than the audio pre-processing and a notification. Harman Kardon is also not as noticeable as on the m8 because its only the base pre-processing and not the whole audio filter. Basically this is going to be a base line mod with a hand full of pre-processing mods, a notification for Dolby, and intense blast to make your phones speakers louder. Sorry for the delay, I'm in the midst of modifying a gpu bios for my Geforce GTX 680 (which includes lots and lots of stability tests). Ill be putting up a link asap with the updated 1.1 zip.
Click to expand...
Click to collapse
Nice to hear, I'm curious
CurbThePain said:
I'm working on getting a Dolby gui but currently I have nothing in terms of Dolby other than the audio pre-processing and a notification. Harman Kardon is also not as noticeable as on the m8 because its only the base pre-processing and not the whole audio filter. Basically this is going to be a base line mod with a hand full of pre-processing mods, a notification for Dolby, and intense blast to make your phones speakers louder. Sorry for the delay, I'm in the midst of modifying a gpu bios for my Geforce GTX 680 (which includes lots and lots of stability tests). Ill be putting up a link asap with the updated 1.1 zip.
Click to expand...
Click to collapse
Any possibilityof eventually down the road adding/incorporating the Harman Kardon Toggles/Settings section into the settings app, or a notification?
bdizzle1686 said:
Any possibilityof eventually down the road adding/incorporating the Harman Kardon Toggles/Settings section into the settings app, or a notification?
Click to expand...
Click to collapse
Thats just not possible, If I could I would but I don't think its possible to make a toggle for pre-processing so minor like harman. If we had compatible hardware or a harman source code for all their drivers and things like that I'd just integrate the whole harman kardon suite but we don't and never will. So no there's no way to add any of that, maybe an artificial notification but nothing else.
CurbThePain said:
Thats just not possible, If I could I would but I don't think its possible to make a toggle for pre-processing so minor like harman. If we had compatible hardware or a harman source code for all their drivers and things like that I'd just integrate the whole harman kardon suite but we don't and never will. So no there's no way to add any of that, maybe an artificial notification but nothing else.
Click to expand...
Click to collapse
Well actually now that u mentioned not being possible, have u seen Sun_Dreams S-Rom for the m7? He has successfully ported (audio effect AND the settings section+toggles for the stock settings app) for HTC M8's Harman Kardon, HTC Butterfly 2's JBL Audio, M8/M9's BoomSound... All CONFIRMED working and AUTHENTIC for the m7. Even the experts who didn't believe it was anything other than a placebo effect tried the rom, and 99% of em posted feedback about how shocked they were that it actually all worked...
bdizzle1686 said:
Well actually now that u mentioned not being possible, have u seen Sun_Dreams S-Rom for the m7? He has successfully ported (audio effect AND the settings section+toggles for the stock settings app) for HTC M8's Harman Kardon, HTC Butterfly 2's JBL Audio, M8/M9's BoomSound... All CONFIRMED working and AUTHENTIC for the m7. Even the experts who didn't believe it was anything other than a placebo effect tried the rom, and 99% of em posted feedback about how shocked they were that it actually all worked...
Click to expand...
Click to collapse
WHAT.... Im looking into this. Thank you for the info.. any links?
Edit... Already half way done on what you want with hk but i gotta get permission first screens soon
Edit Again: If you use google play music or any streaming music player CLEAR THE CACHE AND DATA FOR THOSE APPS and DELETE ALL DOWNLOADED/CACHED MUSIC IN THOSE APPS. There's an odd bug where it says it cant play the music when you used cached music. Another thing, the next update will break beats audio completely so beats will no longer be in the settings. Let me know of any random reboots aswell.
Updated the OP section with a little sneak preview of what may be to come.
curbthepain said:
teaser section for upcoming releases:
Update 1.2 alpha2: We will now be integrating intenseblast in this audio mod to increase the volume output of your built in speakers.
We also have full harmankardon audio on the cutting block right now and it may be approved by sun_dream soon here, just have to wait and see.
Some screenies of harman kardon ^-^
Click to expand...
Click to collapse
omg hell yes!
Hey there Mix users. Dont know if you aware of this but I've been using this great all in one sound mod for a long time(on s6 edge plus), recently ''flashed'' on my Mix which runs latest Epic Rom and voila it works great.
The AryaMod Sound Control(application) has got:
+ Viper4Android
+ Beats Audio
+ Dolby Atmos
I've also modified the other Dolby Digital Plus app to make the two Dolbies(Dolby Atmos, Dolby Digital Plus) work at the same time but although DDP works, it's getting closed when you tap a button, so no need it currently.
Credit goes to developer of this mod: @Kamy and the people who made this mod possible.
CAUTION:
satishp said:
It breaks the default Sound Enhancements like HD Audio. Sound settings force closes when you try accessing stock sound enhancements.
Click to expand...
Click to collapse
AryaMod AIO SoundMod v3(Latest-updated):
https://forum.xda-developers.com/s7-edge/themes/mod-aryamod-aio-soundmod-v3-t3552824
OLDER:
Take a look at AryaMod thread & Download link: https://forum.xda-developers.com/showpost.php?p=65887220&postcount=798
Screenshots of the AryaMod on my Mix:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot of DDP(No link, I can send it via PM if needed):
Great share.
Few things I've noticed:
1. It breaks the default Sound Enhancements like HD Audio. Sound settings force closes when you try accessing stock sound enhancements.
2. While the MOD is decent, there is no way to enable Atmos and beats audio only for headphones. I don't like any sound mods on the phone's speaker as there is a significant risk of damaging the tiny internal speaker.
So, everytime I listen to music, I have to launch music player of choice + enable mods.
I have to make sure I manually disable the mods as soon as I unplug headphones to prevent damage to the speaker. And that sucks.
Anyone knows how to revert to stock enhancements without clean flashing?
It was a good share anyway. Wish the app had a setting to automatically disable sound mods on unplugging headphones.
Cheers!
satishp said:
Great share.
Few things I've noticed:
1. It breaks the default Sound Enhancements like HD Audio. Sound settings force closes when you try accessing stock sound enhancements.
2. While the MOD is decent, there is no way to enable Atmos and beats audio only for headphones. I don't like any sound mods on the phone's speaker as there is a significant risk of damaging the tiny internal speaker.
So, everytime I listen to music, I have to launch music player of choice + enable mods.
I have to make sure I manually disable the mods as soon as I unplug headphones to prevent damage to the speaker. And that sucks.
Anyone knows how to revert to stock enhancements without clean flashing?
It was a good share anyway. Wish the app had a setting to automatically disable sound mods on unplugging headphones.
Cheers!
Click to expand...
Click to collapse
You're right about 1 and 2's some part. Beats audio(V4A also) gets turned off when you unplug headphones but Dolby not. I dont use any of them for speaker too. Sounds weird and echoed lol.
And thanks for reminding 1 to prevent further actions. I will add that as a warning to first post if you dont mind.
I would personally recommend ARISE sound MOD instead of this, it's typical that default sound MOD will be disable and crash when you go into that setting.
I don't think ATOM is that good, I use VIPER mainly and you can have different settings for speaker, headphone, Bluetooth... Etc.
Lastly, to get rid of sound MOD, you simply dirty flash the rom, no need to wipe anything, done in 5mins.
wu5262 said:
I would personally recommend ARISE sound MOD instead of this, it's typical that default sound MOD will be disable and crash when you go into that setting.
I don't think ATOM is that good, I use VIPER mainly and you can have different settings for speaker, headphone, Bluetooth... Etc.
Lastly, to get rid of sound MOD, you simply dirty flash the rom, no need to wipe anything, done in 5mins.
Click to expand...
Click to collapse
Yes, im aware of Arise as well. Quite good and gets updated but i like using the Dolbies and Beats audio as well. Somehow having a better music experience with Arya even though its very old. Cheers.
Konsstantine34 said:
Yes, im aware of Arise as well. Quite good and gets updated but i like using the Dolbies and Beats audio as well. Somehow having a better music experience with Arya even though its very old. Cheers.
Click to expand...
Click to collapse
I am a bit of an audiophile myself, i am lucky to own a pretty awsome and rather expensive in-ear (JH-Roxanne), there is no best sound, as it's largely down to your listening device/source/preference, but with my setup and my long history of seeking the best sound, I would share something here which I think a lot of people miss when doing sound mod. If you are using Android phone as your source, and you are listening to something like TIDAL HIFI which is 16/44.1 format, one of the most important thing you want to seek for is a chance for Andoird not to upsample the music. Phones typically don't come with Audio grade DAC, and andoird system put another layer to upsample the music usually to 48000 (because videos are in 48000, but audio are in 44100). If you happen to find a sound mod that sample and play your music at your native frequency at 44,100, and to whatever bits your source is (16 in my case for TIDAL HIFI), then you already have a much cleaner and (much better) sound imo than sound mod that upsample to 48000.
This is the case for me, i tried a lot of sound mod, even different version of ARISE Deut, and luckily i was able to tweak and run ARISE Deut 2.3.3 in my native frequency, no upsampling at all, and this sound is quite a bit better than the newer version of ARISE Deut 2.4 which upsample and i was not able to change that.
I suggest you give it a try, use ROM toolbox tool and goto BuildProp editor and disable 24 bit processing and also change the ARISE setprop, or your audio mod setprop to disable 24 bit processing and force 44,100 sample rate. You might find it to give your sound quarlity a noticably big boost, but again, this is my preference and you may not like it. Also it depends on your file format, if you are only listening Spotify then that's another story, or if you are listening to 24bit file, then that's also difference.
TL/DR, upsampling is bad, there is a good explanation about this online if you want to look into it deeper, having your phone to not upsample your music will imo usually gives you better sound in all of these sound mod.
Thanks for your time to explain and advice, really appreciate it. When i get a new rom to flash, i may try. Im just setting up all my previous apps/mods etc and will be observing the performance/battery life for a while. Also trying to get used to a device with on screen buttons(never liked 'em lol). Lets see how it goes. Thanks again. [emoji106]
The developer has been updated the mod to v3. FYI.
I know that this thread is very old, but I bought the xiaomi mi mix a few weeks ago and I'm still learning what I can and can't do with this beast. Can I use with RR 7.1.2?
Sent from my MI MIX using Tapatalk
Try this... https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
much better for me...
How did you guys install the Viper or Arise?
I am currently on Epic Rom MIUI 9 and I couldn't get any of the two to enable the driver
With Magisk and the module or the "classic" way with SuperSu and Busybox it never gets enabled .
rainfactor said:
How did you guys install the Viper or Arise?
I am currently on Epic Rom MIUI 9 and I couldn't get any of the two to enable the driver
With Magisk and the module or the "classic" way with SuperSu and Busybox it never gets enabled .
Click to expand...
Click to collapse
Use this Arise zip: https://androidfilehost.com/?fid=457095661767141554
Select new user and Install:
» Viper 2.5.0.4
» Dolby
» The apps you may like like Esira player, Wlkman player etc
There are some modules like Ice sound etc, you can read about it while installing.
** Uninstall or skip Arkamys audio and MusicFX(constant FC's)
** Set permission to permissive
** AM3D zirene module doesnt seem to be working on Nougat, just saying.
** This module breaks the inbuilt headphones&audio effects feature..
Im actually using 2.89, which has both Dolby digital plus and Dolby atmos that you can use at the same time(to increase optimization).
Let me know ?
Konstantine34 said:
Use this Arise zip: https://androidfilehost.com/?fid=457095661767141554
Select new user and Install:
» Viper 2.5.0.4
» Dolby
» The apps you may like like Esira player, Wlkman player etc
There are some modules like Ice sound etc, you can read about it while installing.
** Uninstall or skip Arkamys audio and MusicFX(constant FC's)
** Set permission to permissive
** AM3D zirene module doesnt seem to be working on Nougat, just saying.
** This module breaks the inbuilt headphones&audio effects feature..
Im actually using 2.89, which has both Dolby digital plus and Dolby atmos that you can use at the same time(to increase optimization).
Let me know
Click to expand...
Click to collapse
Finally I got some time to play with it and It eventually worked
Took some fiddling though because it wouldn't enable but now seems to be working well
Dolby Atmos is crashing but all the other Viper effects work nicely
Thank you! :good:
rainfactor said:
Dolby Atmos is crashing
Click to expand...
Click to collapse
It's because of the Dolby Atmos is already installed by Epic rom(depends on version). If you want to make the Dolby work correctly; de-compress the Epic rom zip, remove dolby zip and dolby strings from updater-script and recompress the rom zip then cleanly flash it, i mean from scratch which is painfull. Perhaps removing the installed dolby files from the directories then re-flash Arise may help though.
Sent from my lithium using XDA Labs
That worked well!!
Thank you again!
Hi can we have better volume with speaker?
And stereo speaker?
Phone speaker yes... with bluetooth headset or Jack headset too...
lesscro said:
Phone speaker yes... with bluetooth headset or Jack headset too...
Click to expand...
Click to collapse
Teach us master ?
NO magical stuff...
Like all time :
ARISE Sound Systems™ - Autistic Research in Sound Enhancement
With Magisk Module
Flash all via TWRP
Don't forget to configuree arise_customize.prop (in root of memory, reading during flash)
My config :
• Viper 2.5.0.5
• Atmos
• Ice Sound
• Ice Sound Preset 09
Start V4A and enable various tweaks for speaker, headset and bluettoh
I manage some profiles with my Beats X headset
And now i use Sony Music player...
With this config, my phone is like a Party with DJ's And girls on table... yeah baby !!
I'm on crDroid Oreo 8.1. I'm looking for a good sound mod that will work on my rom. I'm also using a enforcing kernel if that matters.